Structure-soil interface friction characteristics is of importance to investigate the interaction between engineering structures and soils,especially for offshore structures.The interface friction behavior between mar...Structure-soil interface friction characteristics is of importance to investigate the interaction between engineering structures and soils,especially for offshore structures.The interface friction behavior between marine clay and structural materials with different roughness was studied in this paper by using 3D optical scanning tests,a modified direct shear device and numerical simulation.Relationships between the surface roughness of structures,water content and interface friction angle were presented by model tests.The increase of water contents decreased the interface friction angles.For interfaces with different roughness,the interface friction angles will be smaller than that of the soil when the water content exceeds a certain value.The roughness of the interface and the water content of the soil are mutually coupled to influence the coefficient of friction(COF).This paper proposed a Finite Element Method(FEM)to simulate the interface direct shear tests of structures with different roughness.The surface models with different roughness are established based on the structure data obtained by 3D scanning.The Coupled Eulerian-Lagrangian(CEL)approach was employed to analyse soils sheared by irregular surfaces.The interface behavior for interfaces with different roughness under cyclic shear stresses was analyzed by FEM.展开更多
Geotechnical tests conducted on clayey materials of Missole II, Douala sub-basin of Cameroon showed that these materials present: fines particles (55 to 78 wt.%), sand (22 to 44 wt.%), and plasticity index of 13.8 to ...Geotechnical tests conducted on clayey materials of Missole II, Douala sub-basin of Cameroon showed that these materials present: fines particles (55 to 78 wt.%), sand (22 to 44 wt.%), and plasticity index of 13.8 to 21.6%. The X-ray diffraction (XRD) and the chemical analysis revealed a kaolinite amount of 46 to 56 wt.%, 19 to 27 wt.% of illite, 12 to 19 wt.% of quartz, 3 to 5 wt.% of goethite, 2 to 5 wt.% of hematite, 1.5 to 5 wt.% of anatase, 2 to 3 wt.% of feldspar-K with 52.87 to 63.11 wt.% of SiO2, 18.08 to 24.31 wt.% of Al2O3, 3.28 to 11.45 wt.% of Fe2O3 and a small content of bases (<2 wt.%). The results of geotechnical tests combined to those of the XRD and the chemical analysis showed that the Missole II clayey materials are suitable for the manufacture of bricks, tiles and sandstones.展开更多
E-commerce systems for construction material procurement are becoming increasingly important in Hong Kong. These E-commerce systems are non-interoperable and create problems for the buyers who use these systems to pur...E-commerce systems for construction material procurement are becoming increasingly important in Hong Kong. These E-commerce systems are non-interoperable and create problems for the buyers who use these systems to purchase construction materials. This paper presents the mobile agent-based approach and Web services-based approach for enabling interoperation of these systems in the E-Union environment.展开更多
Construction Industry operates relying on various key economic indicators.One of these indicators is material prices.On the other hand,cost is a key concern in all operations of the construction industry.In the uncert...Construction Industry operates relying on various key economic indicators.One of these indicators is material prices.On the other hand,cost is a key concern in all operations of the construction industry.In the uncertain conditions,reliable cost forecasts become an important source of information.Material cost is one of the key components of the overall cost of construction.In addition,cost overrun is a common problem in the construction industry,where nine out of ten construction projects face cost overrun.In order to carry out a successful cost management strategy and prevent cost overruns,it is very important to find reliable methods for the estimation of construction material prices.Material prices have a time dependent nature.In order to increase the foreseeability of the costs of construction materials,this study focuses on estimation of construction material indices through time series analysis.Two different types of analysis are implemented for estimation of the future values of construction material indices.The first method implemented was Autoregressive Integrated Moving Average(ARIMA),which is known to be successful in estimation of time series having a linear nature.The second method implementedwas Non-LinearAutoregressive Neural Network(NARNET)which is known to be successful in modeling and estimating of series with non-linear components.The results have shown that depending on the nature of the series,both these methods can successfully and accurately estimate the future values of the indices.In addition,we found out that Optimal NARNET architectures which provide better accuracy in estimation of the series can be identified/discovered as result of grid search on NARNET hyperparameters.展开更多
Corrosion studies are important due to the enormous cost involved in the replacement of materials in all kinds of applications. The outdoor study on corrosion behavior of aluminum sheet, chequered aluminum plate and z...Corrosion studies are important due to the enormous cost involved in the replacement of materials in all kinds of applications. The outdoor study on corrosion behavior of aluminum sheet, chequered aluminum plate and zinc alloys roofing sheet commonly used as construction material within a highly industrial settlement were examined using the gravimetric technique. The outdoor corrosion of these alloys at different sites was observed via its exposure to atmospheric conditions, monitored and recorded for 12 months at an interval of 2 months. Results depicted a process spanning the initial and intermediate stages of corrosion. The samples of construction materials at Bonny island showed substantial weight losses and rate of corrosion which varied largely on percentage of atmospheric humidity, salt precipitations, industrial aerosols and corrosive gases present at the exposure site as well as the nature of the material and the presence of protective coating formed during corrosion process. The rapid rate of deterioration of these materials causes severe economic importance on the indigenes’ activities including the oil and gas industries and other construction companies on the island. Thus, there is urgent need for research concerned with methods to control or prevent excessive deterioration of metals in Bonny Island.展开更多
This article summarizes the different local construction materials observed in two regions of Cameroon (Adamawa and North-West). These raw materials were mapped and evaluated using various methods of investigation (sp...This article summarizes the different local construction materials observed in two regions of Cameroon (Adamawa and North-West). These raw materials were mapped and evaluated using various methods of investigation (spatial distribution, estimation of reserves, development of a database compatible with geo-referenced maps). The results obtained show three types of local construction materials (vegetal, pedological and geological) with quantitative estimation or distribution. Vegetal local materials include herbaceous savanna with strong dominance of straw in Adamawa region than the North West region. Pedological local construction materials include lateritic soils (ferruginous or clayey), harplan, sandy clay and sandy clay soil while geological local construction materials include volcanic, plutonic and metamorphic rocks. Many sites of these geological materials are suitable for the rock quarry plant. Adamawa region also contains sedimentary rocks constituted by metamorphic conglomerate and sandstones. Two main types of residential homes are constructed with these local construction materials in these regions of Cameroon. These include huts and houses.展开更多
The production of cement and concrete using carbonated steel slag as a supplementary cementitious material achieves the dual benefits of efficient steel slag utilization and CO_(2)fixation.In this study,a combination ...The production of cement and concrete using carbonated steel slag as a supplementary cementitious material achieves the dual benefits of efficient steel slag utilization and CO_(2)fixation.In this study,a combination of microbial technology and a rotary kiln process was employed to expedite the carbonation of steel slag for fixation from cement kiln flue gas.This approach resulted in a significant increase in the CO_(2)-fixation rate,with a CO_(2)-fixation ratio of approximately 10%achieved within 1 h and consistent performance across different seasons throughout the year.Investigation revealed that both the CO_(2)-fixation ratio and the particle fineness are pivotal for increasing the soundness and reactivity of steel slag.When the CO_(2)-fixation ratio exceeds 8%and the specific surface area is at least 300 m2∙kg−1,the soundness issue of steel slag can be effectively addressed,facilitating the safe utilization of steel slag.Residual microbes present in the carbonated steel slag powder act as nucleating sites,increasing the hydration rate of the silicate phases in Portland cement to form more hydration products.Microbial regulation results in the biogenic calcium carbonate having smaller crystal sizes,which facilitates the formation of monocarboaluminate to increase the strength of hardened cement paste.At the same CO_(2)-fixation ratio,microbial mineralized steel slag powder exhibits greater hydration activity than carbonated steel slag powder.With a CO_(2)-fixation ratio of 10%and a specific surface area of 600 m^(2)∙kg^(−1),replacing 30%of cement clinker with microbial mineralized steel slag powder yields an activity index of 87.7%.This study provides a sustainable solution for reducing carbon emissions and safely and efficiently utilizing steel slag in the construction materials sector,while expanding the application scope of microbial technology.展开更多
Sludge as the by-product of wastewater treatment usually accumulates toxic substances that require specific treatment before disposal.With the increase of sludge production,the safe and economic treatment of sludge ha...Sludge as the by-product of wastewater treatment usually accumulates toxic substances that require specific treatment before disposal.With the increase of sludge production,the safe and economic treatment of sludge has become a global issue.Construction filed provides a solution for consuming huge volumes of sludge and sludge ash owing to the similar chemical composition with cementitious materials.This paper critically reviewed the current status of recycling sludge and sludge ash into low-carbon construction materials and highlighted the future perspectives of sludge-derived construction materials.Furthermore,the immobilization mechanisms of heavy metals in sludge-derived construction materials were elaborated to promote the actualization of sustainable management of sludge and sludge ash.展开更多
The manufacturing of ordinary Portland cement is an energy-intensive process that results in pollution and CO2 emissions,among other issues.There is a need for an environmentally friendly green concrete substitute.Was...The manufacturing of ordinary Portland cement is an energy-intensive process that results in pollution and CO2 emissions,among other issues.There is a need for an environmentally friendly green concrete substitute.Waste products from a variety of sectors can be recycled and used as a green concrete substitute.This decreases the environmental effects of concrete manufacturing as well as energy consumption.The use of solid waste materials for green building is extremely important now and in the future.Green concrete is also in its infancy in terms of manufacturing and application.Academics must intervene by encouraging business implementation.The aim of this review paper is to raise awareness about the importance of repurposing recycled materials and to highlight new technologies for producing green,sustainable concrete.展开更多
1 Scope This standard specifies the definition, classifica- tion, technical requirements, test methods, quality ap- praisal procedure, packing, marking, transportation, stroage and quality certificate of carbon rammi...1 Scope This standard specifies the definition, classifica- tion, technical requirements, test methods, quality ap- praisal procedure, packing, marking, transportation, stroage and quality certificate of carbon ramming mate- rials for blast furnace construction. This standard is applicable to carbon ramming materials for construction in leveling layer of blast furnace bottom, ramming layer upper or lower the cen- tral line of water cooling pipes, joints between carbon bricks, or joints between carbon bricks and cooling equipment.展开更多
The rapid development of novel energy materials has led to a sustained surge in the global demand for fluorine.Fluorite is the primary source of fluorine globally and is increasingly being exploited.The estimated annu...The rapid development of novel energy materials has led to a sustained surge in the global demand for fluorine.Fluorite is the primary source of fluorine globally and is increasingly being exploited.The estimated annual production of fluorite worldwide is approximately 8 million tons,with an additional 5 million tons of fluorite tailings.This accumulation not only consumes land resources,but also contributes to dust generation and F-percolation,leading to water and air contamination.This paper comprehensively reviews the utilization methods of fluorite tailings,including the flotation recovery of quartz and fluorite,the preparation of cement mineralizing agents,and the preparation of concrete mineral additives,autoclaved lime sand brick,and glass-ceramics.Furthermore,potential future applications and research directions are proposed,including the comprehensive recovery of valuable minerals,auxiliary cementitious materials preparation,and the functionalization of glass-ceramics.This study can serve as a reference for expediting the utilization of fluorite tailings,promoting the development of tailing-free mines,and establishing sustainable development strategies.展开更多
Considering that buildings represent 40% of greenhouse gases and approximately 10% of global gross domestic product, the target the building industry has to accomplish is to get to a high quality and low carbon living...Considering that buildings represent 40% of greenhouse gases and approximately 10% of global gross domestic product, the target the building industry has to accomplish is to get to a high quality and low carbon living, by reducing carbon emission by 2050, as said by Energy Performance of Buildings Directive. Considering these needs, designers, manufacturers and construction companies should be able to make use of web and design tools for collecting and inventorying a large variety of environmentally friendly materials, through a specific database that encloses low carbon certified products and eco-labeled ones. The eco-labels are internationally identified as the best tools to encourage the spread of green products and low carbon notions, even if in Europe, there is no specific tool to be used. The project called LoCaMat （Low Carbon Material Database） will act as the first Italian and European database that encompasses multiple data on certified green materials to be used for the construction sector, making buildings climate change resilient, ensuring an efficient use of energy and resources, getting to a complete life cycle assessment for buildings materials and components, encompassing, for the first time, green data and every kind of environmental specs for sustainable design and green practice.展开更多
Requirements for the respect of the environment encourage to reduce the impact of human activity on the nature. Civil engineering answers these requirements by the development of ecological construction materials. Thi...Requirements for the respect of the environment encourage to reduce the impact of human activity on the nature. Civil engineering answers these requirements by the development of ecological construction materials. This paper deals with the transformation of clay raw materials which enable the processing of environmentally friendly construction materials: in addition to their biodegradability, the alveolar fired clay materials allow energy saving in home heating thanks to their thermal isolation properties. But their manufacturing is a high energy consumption process, in particular during compaction, drying and firing which contribute to the emission of greenhouse gases. The goal of this paper is to study the rheology of clay pastes in order to develop low energy in manufacturing processes. For this purpose, theoretical and experimental approaches were carried out on six clay varieties. In the theoretical approach, a finite element (FE) simulation model has been developed for pressing a non-rigid material predicting deformations and stresses occurring within the clay structure. Experiments have then been carried out to validate the finite element modelling. In this experimental approach, the clay pastes were transformed with water content respecting the Atterberg limits which determine the plasticity of clays. The samples compaction has been carried out under variable loadings in order to determine the suitable low energy consumption loading.展开更多
This paper investigates the stone masonry with timber reinforcement through the European traditional and historical architecture.It is a remarkable practice consisting of combining different materials to build up a ma...This paper investigates the stone masonry with timber reinforcement through the European traditional and historical architecture.It is a remarkable practice consisting of combining different materials to build up a masonry.This technology shows a wide variety of typological,formal,and technological types of buildings across Europe as it is strongly influenced by the nature and availability of local materials,the cultural aspects of the various communities,and the soils geological nature.As a consequence,the same constructive typology is based on different premises and leads to many interesting results.In this paper the various uses of such a mixed stone-timber masonry are shown in relation to the above mentioned factors.One of the most interesting aspect is the use of such a mix stone-timber as an anti-seismic device,especially in the Southern and Mediterranean countries,giving evidence to a great sensibility of the ancient builders to very specific topics.It is also important to stress that this traditional technology is also highly contemporary being exploited in many countries,especially in the far northern ones.Furthermore,novel regulations have been issued in order to regulate such a discipline,especially the use of timber for large structure and infrastructure.Finally,as a very common constructive technology,many historical buildings present such a mixed structural configuration,independently from the generating factors.In such a perspective,this study aims to describe the most common constructive features,as well as develop guidelines for preservation,whereas the typology is present,or design criteria for consolidation and structural improvement,whereas necessary.展开更多
Characterized by high consumption of natural resources and great generation of environmental impacts,civil construction becomes an important ally to the development of strategies for a more sustainable built environme...Characterized by high consumption of natural resources and great generation of environmental impacts,civil construction becomes an important ally to the development of strategies for a more sustainable built environment.In this context,this article aims to evaluate construction systems of social interest housing and point out their participation in relation to total impacts,in addition to indicating the environmental impacts embedded in the construction materials present in these systems.To this end,a case study was selected to apply Life Cycle Assessment(LCA)methodology and assess impacts of the building materials used in a house of a social housing complex.LCA was applied to masonry,roof,coatings and floor systems.The scope adopted assesses impacts incorporated in construction materials,analyzing the stages of raw material extraction,materials production,transport to construction site,maintenance and materials replacement.Concerning life cycle inventory,Ecoinvent 3.6 database was used and environmental impacts were calculated using CML method with the aid of OpenLCA 1.9 software.In general,results showed that the maintenance phase has the greatest environmental impact participation related to analyzed systems.Furthermore,it was possible to conclude that coatings and masonry systems were the ones that most added to total environmental impacts.展开更多
This study presents the development of high strength concrete (HSC) that has been made more sustainable by using both local materials from central Texas and recycled concrete aggregate (RCA), which has also been obtai...This study presents the development of high strength concrete (HSC) that has been made more sustainable by using both local materials from central Texas and recycled concrete aggregate (RCA), which has also been obtained locally. The developed mixtures were proportioned with local constituents to increase the sustainable impact of the material by reducing emissions due to shipping as well as to make HSC more affordable to a wider variety of applications. The specific constituents were: limestone, dolomite, manufactured sand (limestone), locally available Type I/II cement, silica fume, and recycled concrete aggregate, which was obtained from a local recycler which obtains their product from local demolition. Multiple variables were investigated, such as the aggregate type and size, concrete age (7, 14, and 28-days), the curing regimen, and the water-to-cement ratio (w/c) to optimize a HSC mixture that used local materials. This systematic development revealed that heat curing the specimens in a water bath at 50℃ (122oF) after demolding and then dry curing at 200℃ (392oF) two days before testing with a w/c of 0.28 at 28-days produced the highest compressive strengths. Once an optimum HSC mixture was identified a partial replacement of the coarse aggregate with RCA was completed at 10%, 20%, and 30%. The results showed a loss in compressive strength with an increase in RCA replacement percentages, with the highest strength being approximately 93.0 MPa (13,484 psi) at 28-days for the 10% RCA replacement. The lowest strength obtained from an RCA-HSC mixture was approximately 72.9 (MPa) (10,576 psi) at 7-days. The compressive strengths obtained from the HSC mixtures containing RCA developed in this study are comparable to HSC strengths presented in the literature. Developing this innovative material with local materials and RCA ultimately produces a novel sustainable construction material, reduces the costs, and produces mechanical performance similar to prepackaged, commercially, available construction building materials.展开更多
In the process of China's modernization, the development of the construction industry has played a key role in promoting. In the construction of construction projects, the cost control is the main link in the whol...In the process of China's modernization, the development of the construction industry has played a key role in promoting. In the construction of construction projects, the cost control is the main link in the whole cost control. In the analysis of this paper, based on the cost of the construction of the current construction projects as the starting point, targeted analysis of some elements that affect the cost management of construction projects, and put forward targeted management optimization measures, in order to help the relevant staff skills to carry out the work smoothly.展开更多
Building materials is not only a basic course content of architectural specialization,but also a practical course content taught in higher vocational institutions.It has a large number of knowledge points,a large numb...Building materials is not only a basic course content of architectural specialization,but also a practical course content taught in higher vocational institutions.It has a large number of knowledge points,a large number of principled and operational contents,and weak logic,all of which have an impact on the teaching effect.It is necessary to strengthen research on higher vocational building materials curriculum against the background of“three educations”reformation,as well as explore curriculum teaching reform strategy in conjunction with the current situation of higher vocational building materials curriculum teaching,in order to cultivate talents of high quality and professional ability.展开更多
A number of geotechnical analyses were carried out on selected carbonate rock samples from eight sites located in Egypt. This analysis was to assess the suitability of these rocks for building construction aggregate. ...A number of geotechnical analyses were carried out on selected carbonate rock samples from eight sites located in Egypt. This analysis was to assess the suitability of these rocks for building construction aggregate. The analyses included properties of uniaxial compressive strength, tensile strength, porosity, water absorption, and dynamic fragmentation. The success of building construction depends to a large extent on the availability of raw materials at affordable prices. Raw materials commonly used in the building industry include sands, gravels, clays and clay-derived products. Despite the widespread occurrence of carbonate rocks throughout Egypt, the low premium placed on their direct application in the building sector may be explained in two ways: firstly, the lack of awareness of the potential uses of carbonate rocks in the building construction industry(beyond the production of asbestos, ceiling boards, roof sheets and Portland cement); and secondly, the aesthetic application of carbonate rocks in the building construction depends mainly on their physical attributes, a knowledge of which is generally restricted to within the confines of research laboratories and industries. Thus this paper addresses the physical and mechanical characteristics of some Egyptian carbonate rocks, evaluating them for their suitability as building construction aggregates.展开更多
基金supported by a grant from the National Natural Science Foundations of China(No.52171282)supported by Taishan Scholars Program of Shandong Province,China(No.tsqn202306098)the Shandong Provincial Key Research and Development Plan,China(No.2021ZLGX04).
文摘Structure-soil interface friction characteristics is of importance to investigate the interaction between engineering structures and soils,especially for offshore structures.The interface friction behavior between marine clay and structural materials with different roughness was studied in this paper by using 3D optical scanning tests,a modified direct shear device and numerical simulation.Relationships between the surface roughness of structures,water content and interface friction angle were presented by model tests.The increase of water contents decreased the interface friction angles.For interfaces with different roughness,the interface friction angles will be smaller than that of the soil when the water content exceeds a certain value.The roughness of the interface and the water content of the soil are mutually coupled to influence the coefficient of friction(COF).This paper proposed a Finite Element Method(FEM)to simulate the interface direct shear tests of structures with different roughness.The surface models with different roughness are established based on the structure data obtained by 3D scanning.The Coupled Eulerian-Lagrangian(CEL)approach was employed to analyse soils sheared by irregular surfaces.The interface behavior for interfaces with different roughness under cyclic shear stresses was analyzed by FEM.
文摘Geotechnical tests conducted on clayey materials of Missole II, Douala sub-basin of Cameroon showed that these materials present: fines particles (55 to 78 wt.%), sand (22 to 44 wt.%), and plasticity index of 13.8 to 21.6%. The X-ray diffraction (XRD) and the chemical analysis revealed a kaolinite amount of 46 to 56 wt.%, 19 to 27 wt.% of illite, 12 to 19 wt.% of quartz, 3 to 5 wt.% of goethite, 2 to 5 wt.% of hematite, 1.5 to 5 wt.% of anatase, 2 to 3 wt.% of feldspar-K with 52.87 to 63.11 wt.% of SiO2, 18.08 to 24.31 wt.% of Al2O3, 3.28 to 11.45 wt.% of Fe2O3 and a small content of bases (<2 wt.%). The results of geotechnical tests combined to those of the XRD and the chemical analysis showed that the Missole II clayey materials are suitable for the manufacture of bricks, tiles and sandstones.
文摘E-commerce systems for construction material procurement are becoming increasingly important in Hong Kong. These E-commerce systems are non-interoperable and create problems for the buyers who use these systems to purchase construction materials. This paper presents the mobile agent-based approach and Web services-based approach for enabling interoperation of these systems in the E-Union environment.
基金supported by the Energy Cloud R&D Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Science,ICT(2019M3F2A1073164)MSGSU BAP(2021-25).
文摘Construction Industry operates relying on various key economic indicators.One of these indicators is material prices.On the other hand,cost is a key concern in all operations of the construction industry.In the uncertain conditions,reliable cost forecasts become an important source of information.Material cost is one of the key components of the overall cost of construction.In addition,cost overrun is a common problem in the construction industry,where nine out of ten construction projects face cost overrun.In order to carry out a successful cost management strategy and prevent cost overruns,it is very important to find reliable methods for the estimation of construction material prices.Material prices have a time dependent nature.In order to increase the foreseeability of the costs of construction materials,this study focuses on estimation of construction material indices through time series analysis.Two different types of analysis are implemented for estimation of the future values of construction material indices.The first method implemented was Autoregressive Integrated Moving Average(ARIMA),which is known to be successful in estimation of time series having a linear nature.The second method implementedwas Non-LinearAutoregressive Neural Network(NARNET)which is known to be successful in modeling and estimating of series with non-linear components.The results have shown that depending on the nature of the series,both these methods can successfully and accurately estimate the future values of the indices.In addition,we found out that Optimal NARNET architectures which provide better accuracy in estimation of the series can be identified/discovered as result of grid search on NARNET hyperparameters.
文摘Corrosion studies are important due to the enormous cost involved in the replacement of materials in all kinds of applications. The outdoor study on corrosion behavior of aluminum sheet, chequered aluminum plate and zinc alloys roofing sheet commonly used as construction material within a highly industrial settlement were examined using the gravimetric technique. The outdoor corrosion of these alloys at different sites was observed via its exposure to atmospheric conditions, monitored and recorded for 12 months at an interval of 2 months. Results depicted a process spanning the initial and intermediate stages of corrosion. The samples of construction materials at Bonny island showed substantial weight losses and rate of corrosion which varied largely on percentage of atmospheric humidity, salt precipitations, industrial aerosols and corrosive gases present at the exposure site as well as the nature of the material and the presence of protective coating formed during corrosion process. The rapid rate of deterioration of these materials causes severe economic importance on the indigenes’ activities including the oil and gas industries and other construction companies on the island. Thus, there is urgent need for research concerned with methods to control or prevent excessive deterioration of metals in Bonny Island.
文摘This article summarizes the different local construction materials observed in two regions of Cameroon (Adamawa and North-West). These raw materials were mapped and evaluated using various methods of investigation (spatial distribution, estimation of reserves, development of a database compatible with geo-referenced maps). The results obtained show three types of local construction materials (vegetal, pedological and geological) with quantitative estimation or distribution. Vegetal local materials include herbaceous savanna with strong dominance of straw in Adamawa region than the North West region. Pedological local construction materials include lateritic soils (ferruginous or clayey), harplan, sandy clay and sandy clay soil while geological local construction materials include volcanic, plutonic and metamorphic rocks. Many sites of these geological materials are suitable for the rock quarry plant. Adamawa region also contains sedimentary rocks constituted by metamorphic conglomerate and sandstones. Two main types of residential homes are constructed with these local construction materials in these regions of Cameroon. These include huts and houses.
基金sponsored by the National Key Research and Development Program of China(2021YFB3802000 and 2021YFB3802004)the National Natural Science Foundation of China(52172016).
文摘The production of cement and concrete using carbonated steel slag as a supplementary cementitious material achieves the dual benefits of efficient steel slag utilization and CO_(2)fixation.In this study,a combination of microbial technology and a rotary kiln process was employed to expedite the carbonation of steel slag for fixation from cement kiln flue gas.This approach resulted in a significant increase in the CO_(2)-fixation rate,with a CO_(2)-fixation ratio of approximately 10%achieved within 1 h and consistent performance across different seasons throughout the year.Investigation revealed that both the CO_(2)-fixation ratio and the particle fineness are pivotal for increasing the soundness and reactivity of steel slag.When the CO_(2)-fixation ratio exceeds 8%and the specific surface area is at least 300 m2∙kg−1,the soundness issue of steel slag can be effectively addressed,facilitating the safe utilization of steel slag.Residual microbes present in the carbonated steel slag powder act as nucleating sites,increasing the hydration rate of the silicate phases in Portland cement to form more hydration products.Microbial regulation results in the biogenic calcium carbonate having smaller crystal sizes,which facilitates the formation of monocarboaluminate to increase the strength of hardened cement paste.At the same CO_(2)-fixation ratio,microbial mineralized steel slag powder exhibits greater hydration activity than carbonated steel slag powder.With a CO_(2)-fixation ratio of 10%and a specific surface area of 600 m^(2)∙kg^(−1),replacing 30%of cement clinker with microbial mineralized steel slag powder yields an activity index of 87.7%.This study provides a sustainable solution for reducing carbon emissions and safely and efficiently utilizing steel slag in the construction materials sector,while expanding the application scope of microbial technology.
基金support from the National Natural Science Foundation of China(No.52236008)the Zhejiang Provincial Natural Science Foundation of China(LZ23E060004)for this study.
文摘Sludge as the by-product of wastewater treatment usually accumulates toxic substances that require specific treatment before disposal.With the increase of sludge production,the safe and economic treatment of sludge has become a global issue.Construction filed provides a solution for consuming huge volumes of sludge and sludge ash owing to the similar chemical composition with cementitious materials.This paper critically reviewed the current status of recycling sludge and sludge ash into low-carbon construction materials and highlighted the future perspectives of sludge-derived construction materials.Furthermore,the immobilization mechanisms of heavy metals in sludge-derived construction materials were elaborated to promote the actualization of sustainable management of sludge and sludge ash.
文摘The manufacturing of ordinary Portland cement is an energy-intensive process that results in pollution and CO2 emissions,among other issues.There is a need for an environmentally friendly green concrete substitute.Waste products from a variety of sectors can be recycled and used as a green concrete substitute.This decreases the environmental effects of concrete manufacturing as well as energy consumption.The use of solid waste materials for green building is extremely important now and in the future.Green concrete is also in its infancy in terms of manufacturing and application.Academics must intervene by encouraging business implementation.The aim of this review paper is to raise awareness about the importance of repurposing recycled materials and to highlight new technologies for producing green,sustainable concrete.
文摘1 Scope This standard specifies the definition, classifica- tion, technical requirements, test methods, quality ap- praisal procedure, packing, marking, transportation, stroage and quality certificate of carbon ramming mate- rials for blast furnace construction. This standard is applicable to carbon ramming materials for construction in leveling layer of blast furnace bottom, ramming layer upper or lower the cen- tral line of water cooling pipes, joints between carbon bricks, or joints between carbon bricks and cooling equipment.
基金supported by the National Key Research and Development Program of China(No.2023YFC3903901)the Key Research and Development Program of Hubei Province,CHina(No.2022BAA029)the Science and Technology Project of Shaanxi Yanchang Petroleum(Group)Co.,Ltd.,China(No.yc-whlg-2023ky-03).
文摘The rapid development of novel energy materials has led to a sustained surge in the global demand for fluorine.Fluorite is the primary source of fluorine globally and is increasingly being exploited.The estimated annual production of fluorite worldwide is approximately 8 million tons,with an additional 5 million tons of fluorite tailings.This accumulation not only consumes land resources,but also contributes to dust generation and F-percolation,leading to water and air contamination.This paper comprehensively reviews the utilization methods of fluorite tailings,including the flotation recovery of quartz and fluorite,the preparation of cement mineralizing agents,and the preparation of concrete mineral additives,autoclaved lime sand brick,and glass-ceramics.Furthermore,potential future applications and research directions are proposed,including the comprehensive recovery of valuable minerals,auxiliary cementitious materials preparation,and the functionalization of glass-ceramics.This study can serve as a reference for expediting the utilization of fluorite tailings,promoting the development of tailing-free mines,and establishing sustainable development strategies.
文摘Considering that buildings represent 40% of greenhouse gases and approximately 10% of global gross domestic product, the target the building industry has to accomplish is to get to a high quality and low carbon living, by reducing carbon emission by 2050, as said by Energy Performance of Buildings Directive. Considering these needs, designers, manufacturers and construction companies should be able to make use of web and design tools for collecting and inventorying a large variety of environmentally friendly materials, through a specific database that encloses low carbon certified products and eco-labeled ones. The eco-labels are internationally identified as the best tools to encourage the spread of green products and low carbon notions, even if in Europe, there is no specific tool to be used. The project called LoCaMat （Low Carbon Material Database） will act as the first Italian and European database that encompasses multiple data on certified green materials to be used for the construction sector, making buildings climate change resilient, ensuring an efficient use of energy and resources, getting to a complete life cycle assessment for buildings materials and components, encompassing, for the first time, green data and every kind of environmental specs for sustainable design and green practice.
文摘Requirements for the respect of the environment encourage to reduce the impact of human activity on the nature. Civil engineering answers these requirements by the development of ecological construction materials. This paper deals with the transformation of clay raw materials which enable the processing of environmentally friendly construction materials: in addition to their biodegradability, the alveolar fired clay materials allow energy saving in home heating thanks to their thermal isolation properties. But their manufacturing is a high energy consumption process, in particular during compaction, drying and firing which contribute to the emission of greenhouse gases. The goal of this paper is to study the rheology of clay pastes in order to develop low energy in manufacturing processes. For this purpose, theoretical and experimental approaches were carried out on six clay varieties. In the theoretical approach, a finite element (FE) simulation model has been developed for pressing a non-rigid material predicting deformations and stresses occurring within the clay structure. Experiments have then been carried out to validate the finite element modelling. In this experimental approach, the clay pastes were transformed with water content respecting the Atterberg limits which determine the plasticity of clays. The samples compaction has been carried out under variable loadings in order to determine the suitable low energy consumption loading.
文摘This paper investigates the stone masonry with timber reinforcement through the European traditional and historical architecture.It is a remarkable practice consisting of combining different materials to build up a masonry.This technology shows a wide variety of typological,formal,and technological types of buildings across Europe as it is strongly influenced by the nature and availability of local materials,the cultural aspects of the various communities,and the soils geological nature.As a consequence,the same constructive typology is based on different premises and leads to many interesting results.In this paper the various uses of such a mixed stone-timber masonry are shown in relation to the above mentioned factors.One of the most interesting aspect is the use of such a mix stone-timber as an anti-seismic device,especially in the Southern and Mediterranean countries,giving evidence to a great sensibility of the ancient builders to very specific topics.It is also important to stress that this traditional technology is also highly contemporary being exploited in many countries,especially in the far northern ones.Furthermore,novel regulations have been issued in order to regulate such a discipline,especially the use of timber for large structure and infrastructure.Finally,as a very common constructive technology,many historical buildings present such a mixed structural configuration,independently from the generating factors.In such a perspective,this study aims to describe the most common constructive features,as well as develop guidelines for preservation,whereas the typology is present,or design criteria for consolidation and structural improvement,whereas necessary.
文摘Characterized by high consumption of natural resources and great generation of environmental impacts,civil construction becomes an important ally to the development of strategies for a more sustainable built environment.In this context,this article aims to evaluate construction systems of social interest housing and point out their participation in relation to total impacts,in addition to indicating the environmental impacts embedded in the construction materials present in these systems.To this end,a case study was selected to apply Life Cycle Assessment(LCA)methodology and assess impacts of the building materials used in a house of a social housing complex.LCA was applied to masonry,roof,coatings and floor systems.The scope adopted assesses impacts incorporated in construction materials,analyzing the stages of raw material extraction,materials production,transport to construction site,maintenance and materials replacement.Concerning life cycle inventory,Ecoinvent 3.6 database was used and environmental impacts were calculated using CML method with the aid of OpenLCA 1.9 software.In general,results showed that the maintenance phase has the greatest environmental impact participation related to analyzed systems.Furthermore,it was possible to conclude that coatings and masonry systems were the ones that most added to total environmental impacts.
文摘This study presents the development of high strength concrete (HSC) that has been made more sustainable by using both local materials from central Texas and recycled concrete aggregate (RCA), which has also been obtained locally. The developed mixtures were proportioned with local constituents to increase the sustainable impact of the material by reducing emissions due to shipping as well as to make HSC more affordable to a wider variety of applications. The specific constituents were: limestone, dolomite, manufactured sand (limestone), locally available Type I/II cement, silica fume, and recycled concrete aggregate, which was obtained from a local recycler which obtains their product from local demolition. Multiple variables were investigated, such as the aggregate type and size, concrete age (7, 14, and 28-days), the curing regimen, and the water-to-cement ratio (w/c) to optimize a HSC mixture that used local materials. This systematic development revealed that heat curing the specimens in a water bath at 50℃ (122oF) after demolding and then dry curing at 200℃ (392oF) two days before testing with a w/c of 0.28 at 28-days produced the highest compressive strengths. Once an optimum HSC mixture was identified a partial replacement of the coarse aggregate with RCA was completed at 10%, 20%, and 30%. The results showed a loss in compressive strength with an increase in RCA replacement percentages, with the highest strength being approximately 93.0 MPa (13,484 psi) at 28-days for the 10% RCA replacement. The lowest strength obtained from an RCA-HSC mixture was approximately 72.9 (MPa) (10,576 psi) at 7-days. The compressive strengths obtained from the HSC mixtures containing RCA developed in this study are comparable to HSC strengths presented in the literature. Developing this innovative material with local materials and RCA ultimately produces a novel sustainable construction material, reduces the costs, and produces mechanical performance similar to prepackaged, commercially, available construction building materials.
文摘In the process of China's modernization, the development of the construction industry has played a key role in promoting. In the construction of construction projects, the cost control is the main link in the whole cost control. In the analysis of this paper, based on the cost of the construction of the current construction projects as the starting point, targeted analysis of some elements that affect the cost management of construction projects, and put forward targeted management optimization measures, in order to help the relevant staff skills to carry out the work smoothly.
文摘Building materials is not only a basic course content of architectural specialization,but also a practical course content taught in higher vocational institutions.It has a large number of knowledge points,a large number of principled and operational contents,and weak logic,all of which have an impact on the teaching effect.It is necessary to strengthen research on higher vocational building materials curriculum against the background of“three educations”reformation,as well as explore curriculum teaching reform strategy in conjunction with the current situation of higher vocational building materials curriculum teaching,in order to cultivate talents of high quality and professional ability.
文摘A number of geotechnical analyses were carried out on selected carbonate rock samples from eight sites located in Egypt. This analysis was to assess the suitability of these rocks for building construction aggregate. The analyses included properties of uniaxial compressive strength, tensile strength, porosity, water absorption, and dynamic fragmentation. The success of building construction depends to a large extent on the availability of raw materials at affordable prices. Raw materials commonly used in the building industry include sands, gravels, clays and clay-derived products. Despite the widespread occurrence of carbonate rocks throughout Egypt, the low premium placed on their direct application in the building sector may be explained in two ways: firstly, the lack of awareness of the potential uses of carbonate rocks in the building construction industry(beyond the production of asbestos, ceiling boards, roof sheets and Portland cement); and secondly, the aesthetic application of carbonate rocks in the building construction depends mainly on their physical attributes, a knowledge of which is generally restricted to within the confines of research laboratories and industries. Thus this paper addresses the physical and mechanical characteristics of some Egyptian carbonate rocks, evaluating them for their suitability as building construction aggregates.
