Sixteen controlled low-strength material( CLSM)mixtures with various cement-to-sand( C/Sa) ratios and water-to-solid( W/So) ratios were prepared using recycled fine aggregate from urban red brick based construction wa...Sixteen controlled low-strength material( CLSM)mixtures with various cement-to-sand( C/Sa) ratios and water-to-solid( W/So) ratios were prepared using recycled fine aggregate from urban red brick based construction waste.The fluidity and bleeding of the fresh CLSM mixtures were measured via the modified test methods, and the hardened CLSM mixtures were then molded to evaluate their compressive strength and durability. The results showthat the fluidity of the fresh CLSM mixtures is 105 to 227 mm with the corresponding bleeding rate of 3. 7% to 15. 5%, which increases with the increase in fluidity. After aging for 28 d,the compressive strength of the hardened CLSM mixtures reaches 1. 15 to 13. 96 M Pa, and their strength can be further enhanced with longer curing ages. Additionally, the strength increases with the increase of the C/Sa ratio, and decreases with the increase of the W/So ratio under the same curing age. Based on the obtained compressive strength, a fitting model for accurately predicting the compressive strength of the CLSM mixtures was established, which takes into account the above two independent variables( C/Sa and W/So ratios).M oreover, the durability of the hardened CLSM mixtures is enhanced for samples with higher C/Sa ratios.展开更多
A number of geotechnical analyses were carried out on selected carbonate rock samples from eight sites located in Egypt. This analysis was to assess the suitability of these rocks for building construction aggregate. ...A number of geotechnical analyses were carried out on selected carbonate rock samples from eight sites located in Egypt. This analysis was to assess the suitability of these rocks for building construction aggregate. The analyses included properties of uniaxial compressive strength, tensile strength, porosity, water absorption, and dynamic fragmentation. The success of building construction depends to a large extent on the availability of raw materials at affordable prices. Raw materials commonly used in the building industry include sands, gravels, clays and clay-derived products. Despite the widespread occurrence of carbonate rocks throughout Egypt, the low premium placed on their direct application in the building sector may be explained in two ways: firstly, the lack of awareness of the potential uses of carbonate rocks in the building construction industry(beyond the production of asbestos, ceiling boards, roof sheets and Portland cement); and secondly, the aesthetic application of carbonate rocks in the building construction depends mainly on their physical attributes, a knowledge of which is generally restricted to within the confines of research laboratories and industries. Thus this paper addresses the physical and mechanical characteristics of some Egyptian carbonate rocks, evaluating them for their suitability as building construction aggregates.展开更多
基金The National Science and Technology Support Program of China(No.2014BAC07B03)the Science and Technology Project of Transportation Committee of Beijing Government(No.2016-LZJKJ-01-006)the National Natural Science Foundation of China(No.51278016)
文摘Sixteen controlled low-strength material( CLSM)mixtures with various cement-to-sand( C/Sa) ratios and water-to-solid( W/So) ratios were prepared using recycled fine aggregate from urban red brick based construction waste.The fluidity and bleeding of the fresh CLSM mixtures were measured via the modified test methods, and the hardened CLSM mixtures were then molded to evaluate their compressive strength and durability. The results showthat the fluidity of the fresh CLSM mixtures is 105 to 227 mm with the corresponding bleeding rate of 3. 7% to 15. 5%, which increases with the increase in fluidity. After aging for 28 d,the compressive strength of the hardened CLSM mixtures reaches 1. 15 to 13. 96 M Pa, and their strength can be further enhanced with longer curing ages. Additionally, the strength increases with the increase of the C/Sa ratio, and decreases with the increase of the W/So ratio under the same curing age. Based on the obtained compressive strength, a fitting model for accurately predicting the compressive strength of the CLSM mixtures was established, which takes into account the above two independent variables( C/Sa and W/So ratios).M oreover, the durability of the hardened CLSM mixtures is enhanced for samples with higher C/Sa ratios.
文摘A number of geotechnical analyses were carried out on selected carbonate rock samples from eight sites located in Egypt. This analysis was to assess the suitability of these rocks for building construction aggregate. The analyses included properties of uniaxial compressive strength, tensile strength, porosity, water absorption, and dynamic fragmentation. The success of building construction depends to a large extent on the availability of raw materials at affordable prices. Raw materials commonly used in the building industry include sands, gravels, clays and clay-derived products. Despite the widespread occurrence of carbonate rocks throughout Egypt, the low premium placed on their direct application in the building sector may be explained in two ways: firstly, the lack of awareness of the potential uses of carbonate rocks in the building construction industry(beyond the production of asbestos, ceiling boards, roof sheets and Portland cement); and secondly, the aesthetic application of carbonate rocks in the building construction depends mainly on their physical attributes, a knowledge of which is generally restricted to within the confines of research laboratories and industries. Thus this paper addresses the physical and mechanical characteristics of some Egyptian carbonate rocks, evaluating them for their suitability as building construction aggregates.
