This work established a new analytical model based upon the equivalent constraint model （ECM） to constitute an available predictive approach for analyzing the ultimate strength and simulating the stress/strain respo...This work established a new analytical model based upon the equivalent constraint model （ECM） to constitute an available predictive approach for analyzing the ultimate strength and simulating the stress/strain response of general symmetric laminates subjected to combined loading, by taking into account the effect of matrix cracking. The ECM was adopted to mainly predict the in-plane stiffness reduction of the damaged laminate. Basic consideration that progressive matrix cracking provokes a re-distribution of the stress fields on each lamina within laminates, which greatly deteriorates the stress distributed in the primary load-bearing lamina and leads to the final failure of the laminates, is introduced for the construction of the failure criterion. The effects of lamina properties, lay-up configurations and loading conditions on the behaviors of the laminates were examined in this paper. A comparison of numerical results obtained from the established model and other existed models and published experimental data was presented for different material systems. The theory predictions demonstrated great match with the experimental observations investigated in this study.展开更多
The Object-Attribute-Relationship(OAR)model provides a single model tocapture data structure,behavior properties and knowledge rules in the CAPP application.This paper focuses on how to integrate a variety of differen...The Object-Attribute-Relationship(OAR)model provides a single model tocapture data structure,behavior properties and knowledge rules in the CAPP application.This paper focuses on how to integrate a variety of different knowledge rules into the OARmodel and how to form transactions against the data structure with these rules in order toimplement intelligent process planning for designed components.The mapping from theOAR to Smalltalk can be directly carried out.It makes the implementation an entirely Ob-ject-Oriented approach.展开更多
Design changes for 2D & 3D geometry are the most important features in the process of product design.Constraint modeling for variationl geometry based on geometric reasoning is one of the best approaches for this ...Design changes for 2D & 3D geometry are the most important features in the process of product design.Constraint modeling for variationl geometry based on geometric reasoning is one of the best approaches for this goal.However,it is difficult for the proposed systems to maintain or handle the consistency and completeness of the constraint model of the design objects.To change this situation,a semantic model and its control approach are presented,aiming at the integration of the data,knowledge and method related to design objects.Aconstraint definition system for in- teractively defining the semantic model and a prototype modeler based on the semantic model are also implemented to examine the idea which is extended to 3D geometric design too.展开更多
A new geometric constraint model is described, which is hierarchical and suitable for parametric feature based modeling. In this model, different levels of geometric information are represented to support various stag...A new geometric constraint model is described, which is hierarchical and suitable for parametric feature based modeling. In this model, different levels of geometric information are represented to support various stages of a design process. An efficient approach to parametric featu-re based modeling is also presented, adopting the high level geometric constraint model. The low level geometric model such as B-reps can be derived automatically from the high level geometric constraint model, enabling designers to perform their task of detailed design.展开更多
A unilateral non-penetration constraint dynamical simulation model withfriction is constructed based on compliant model for mechanical system VP (virtual prototyping)simulation. This model combines computer graphics w...A unilateral non-penetration constraint dynamical simulation model withfriction is constructed based on compliant model for mechanical system VP (virtual prototyping)simulation. This model combines computer graphics with multi-body system dynamics. It avoidshandling multiplicity of solution, such as cases of no solution, multi-solution brought about byfriction during traditional construction of non-penetration constraint based on rigid model. At thesame time, the realism of VE (virtual environment) is improved in process of simulation.Furthermore, the valid condition of rolling and sliding unilateral contact is constituted based onsingular perturbation and linear complementary theory. Finally, the compliant method is verified byan interaction between a multi-legged robot and VE.展开更多
On the research of assembly modeling of mechanical products,current CAD systems can only support the design Process of component-to-assembly. It is difficult to realize the design process of assembly-to -component.The...On the research of assembly modeling of mechanical products,current CAD systems can only support the design Process of component-to-assembly. It is difficult to realize the design process of assembly-to -component.The theory of self-organizing assembly modeling based on relational constraints is proposed, which implements the product design of assembly-to-component commencing with conceptual design and supporting abstract design and step-nice refinement design.展开更多
To shed light on the subgrid-seale （SGS） modeling methodology of nonlinear systems such as the Navier-Stokes turbulence, we define the concepts of assumption and restriction in the modeling procedure, which are show...To shed light on the subgrid-seale （SGS） modeling methodology of nonlinear systems such as the Navier-Stokes turbulence, we define the concepts of assumption and restriction in the modeling procedure, which are shown by generalized derivation of three general mathematical constraints for different combinations of restrictions. These constraints are verified numerically in a one-dimensional nonlinear advection equation. This study is expected to inspire future research on the SGS modeling methodology of nonlinear systems.展开更多
In this paper,an active fault accommodate strategy is proposed for the plant in the presence of actuator fault and input constraints,which is a combination of a direct adaptive control algorithm with multiple model sw...In this paper,an active fault accommodate strategy is proposed for the plant in the presence of actuator fault and input constraints,which is a combination of a direct adaptive control algorithm with multiple model switching.The μ-modification is introduced in the model reference architecture to construct the adaptive controller.The proof of stability is based on the candidate Lyapunov function,while appropriate switching of multiple models guarantees asymptotic tracking of the system states and the boundedness of all signals.Simulation results illustrate the efficiency of the proposed method.展开更多
We study the cosmic constraint to the wCDM （cold dark matter with a constant equation of state w） model via 118 strong gravitational lensing systems which are compiled from SLA CS, BELLS, LSD and SL2S surveys, where...We study the cosmic constraint to the wCDM （cold dark matter with a constant equation of state w） model via 118 strong gravitational lensing systems which are compiled from SLA CS, BELLS, LSD and SL2S surveys, where the ratio between two angular diameter distances Dobs =DA（Zl, Zs ） / D A （ O, Zs ） is taken as a cosmic observable. To obtain this ratio, we adopt two strong tensing models： one is the singular isothermal sphere model （SIS） and the other one is the power-law density profile （PLP） model. Via the Markov chain Monte Carlo method, the posterior distribution of the cosmological model parameters space is obtained. The results show that the cosmological model parameters are not sensitive to the parameterized forms of the power-law index γ. Furthermore, the PLP model gives a relatively tighter constraint to the cosmological parameters than that of the SIS model. The predicted value of Ωm = 0.31＋0.44 -0.24 by the SIS model is compatible with that obtained by P1anck2015： Ωm = 0.313 ± 0.013. However, the value of Ωm =0.15＋0.13 -0.11 based on the PLP model is smaller and has 1.25σ tension with that obtained by Planck2015.展开更多
Because model switching system is a typical form of Takagi-Sugeno（T-S） model which is an universal approximator of continuous nonlinear systems, we describe the model switching system as mixed logical dynamical （ML...Because model switching system is a typical form of Takagi-Sugeno（T-S） model which is an universal approximator of continuous nonlinear systems, we describe the model switching system as mixed logical dynamical （MLD） system and use it in model predictive control （MPC） in this paper. Considering that each local model is only valid in each local region,we add local constraints to local models. The stability of proposed multi-model predictive control （MMPC） algorithm is analyzed, and the performance of MMPC is also demonstrated on an inulti-multi-output（MIMO） simulated pH neutralization process.展开更多
A new scheme of adaptive control is proposed for a class of linear time-invariant（ LTI） dynamical systems,especially in aerospace,with matched parametric uncertainties and input constraints. Based on a typical and c...A new scheme of adaptive control is proposed for a class of linear time-invariant（ LTI） dynamical systems,especially in aerospace,with matched parametric uncertainties and input constraints. Based on a typical and conventional direct model reference adaptive control scheme,various modifications have been employed to achieve the goal. ＂C omposite model reference adaptive control＂of higher performance is seam-lessly combined with ＂positive μ-mod＂,which consequently results in a smooth tracking trajectory despite of the input constraints. In addition,bounded-gain forgetting is utilized to facilitate faster convergence of parameter estimates. The stability of the closed-loop systemcan be guaranteed by using Lyapunov theory.The merits and effectiveness of the proposed method are illustrated by a numerical example of the longitudinal dynamical systems of a fixed-wing airplane.展开更多
We study and derive the energy conditions in generalized non-local gravity, which is the modified theory of general relativity obtained by adding a term m2n-2R□-nRto the Einstein-Hilbert action. Moreover, to obtain s...We study and derive the energy conditions in generalized non-local gravity, which is the modified theory of general relativity obtained by adding a term m2n-2R□-nRto the Einstein-Hilbert action. Moreover, to obtain some insight on the meaning of the energy conditions, we illustrate the evolutions of four energy conditions with the model parameter ε for different n. By analysis we give the constraints on the model parameters ε.展开更多
In remote areas far from the grid, wind/PV/storage generating system is relatively a good choice, whatever in resource configuration, performance or prices. For the independent hybrid power system, the output models o...In remote areas far from the grid, wind/PV/storage generating system is relatively a good choice, whatever in resource configuration, performance or prices. For the independent hybrid power system, the output models of wind turbines, photovoltaic arrays and batteries are built in this paper, and based on the objectives of the capacity configuration optimal model, constraints used in the process of capacity configuration are analyzed. These provide convenient conditions and theoretical basis for the optimal capacity configuration of independent wind/PV/storage system.展开更多
Because of explosive growth in Internet traffic and high complexity of heterogeneous networks, improving the routing and wavelength assignment （RWA） algorithm in underlying optical networks has become very important...Because of explosive growth in Internet traffic and high complexity of heterogeneous networks, improving the routing and wavelength assignment （RWA） algorithm in underlying optical networks has become very important. Where there are multiple links between different the node pairs, a traditional wavelength-assignment algorithm may be invalid for a wavelength-switched optical networks （WSON） that has directional blocking constraints. Also, impairments in network nodes and subsequent degradation of optical signals may cause modulation failure in the optical network. In this paper, we propose an RWA algorithm based on a novel evaluation model for a WSQN that has multiple constraints. The algorithm includes comprehensive evaluation model （CEM） and directional blocking constraint RWA based on CEM （DB-RWA）. Diverse constraints are abstracted into various constraint conditions in order to better assign routing and wavelength. We propose using the novel CEM to optimize routing according to an assessed value of constraints on transmission performance. This eliminates the effects of physical transmission impairments in a WSON. DB-RWA based on CEM abstracts directional blocking conditions in multiple links between network nodes into directional blocking constraints. It also satisfies rigorous network specifications and provides flexibility, scalability, and first-fit rate for the backbone, especially in multiple links between WSON nodes.展开更多
Feasibility analysis of soft constraints for input and output variables is critical for model predictive control(MPC).When encountering the infeasible situation, some way should be found to adjust the constraints to g...Feasibility analysis of soft constraints for input and output variables is critical for model predictive control(MPC).When encountering the infeasible situation, some way should be found to adjust the constraints to guarantee that the optimal control law exists. For MPC integrated with soft sensor, considering the soft constraints for critical variables additionally makes it more complicated and difficult for feasibility analysis and constraint adjustment. Therefore, the main contributions are that a linear programming approach is proposed for feasibility analysis, and the corresponding constraint adjustment method and procedure are given as well. The feasibility analysis gives considerations to the manipulated, secondary and critical variables, and the increment of manipulated variables as well. The feasibility analysis and the constraint adjustment are conducted in the entire control process and guarantee the existence of optimal control. In final, a simulation case confirms the contributions in this paper.展开更多
A new exist-null combined model is proposed for the structural topology optimization. The model is applied to the topology optimization of the truss with stress constraints. Satisfactory computational result can be ob...A new exist-null combined model is proposed for the structural topology optimization. The model is applied to the topology optimization of the truss with stress constraints. Satisfactory computational result can be obtained with more rapid and more stable convergence as compared with the cross-sectional optimization. This work also shows that the presence of independent and continuous topological variable motivates the research of structural topology optimization.展开更多
An approach of stochastically statistical mechanics and a unified molecular theory of nonlinear viscoelasticity with constraints of Nagai chain entanglement for polymer melts have been proposed. A multimode model stru...An approach of stochastically statistical mechanics and a unified molecular theory of nonlinear viscoelasticity with constraints of Nagai chain entanglement for polymer melts have been proposed. A multimode model structure for a single polymer chain with n tail segments and N reversible entanglement sites on the test polymer chain is developed. Based on the above model structure and the mechanism of molecular flow by the dynamical reorganization of entanglement sites, the probability distribution function of the end-to-end vectr for a single polymer chain at entangled state and the viscoelastic free energy of deformation for polymer melts are calculated by using the method of the stochastically statistical mechanics. The four types of stress-strain relation and the memory function are derived from this thery. The above theoretical relations are verified by the experimentaf data for various polymer melts. These relations are found to be in good agreement with the experimental results展开更多
Life arose as a non-equilibrium thermodynamic process to dissipate the photon potential generated by the hot Sun and cold outer space. Evidence from the geochemical record of the evolutionary history of life on Earth ...Life arose as a non-equilibrium thermodynamic process to dissipate the photon potential generated by the hot Sun and cold outer space. Evidence from the geochemical record of the evolutionary history of life on Earth suggests that life originated in a hot aqueous environment dissipating UV light and evolved later to dissipate visible light. This evidence places constraints on models of solar origin and evolution. The standard solar model seems less compatible with the data than does the pulsar centered solar model.展开更多
This paper investigates State Space Model Predictive Control (SSMPC) of an aerothermic process. It is a pilot scale heating and ventilation system equipped with a heater grid and a centrifugal blower, fully connected ...This paper investigates State Space Model Predictive Control (SSMPC) of an aerothermic process. It is a pilot scale heating and ventilation system equipped with a heater grid and a centrifugal blower, fully connected through a data acquisition system for real time control. The interaction between the process variables is shown to be challenging for single variable controllers, therefore multi-variable control is worth considering. A multi-variable state space model is obtained from on-line experimental data. The controller design is translated into a Quadratic Programming (QP) problem, in which a cost function subject to actuators linear inequality constraints is minimized. The outcome of the experimental results is that the main control objectives, such as set-point tracking and perturbations rejection under actuators constraints, are well achieved for both controlled variables simultaneously.展开更多
基金supported by the Natural Science Foundation Project of CQ CSTC(No.2009BB4290)the National Natural Science Foundation of China(No.10772105)the National Natural Science Association Foundation(NSAF) of China (No.10776023).
文摘This work established a new analytical model based upon the equivalent constraint model （ECM） to constitute an available predictive approach for analyzing the ultimate strength and simulating the stress/strain response of general symmetric laminates subjected to combined loading, by taking into account the effect of matrix cracking. The ECM was adopted to mainly predict the in-plane stiffness reduction of the damaged laminate. Basic consideration that progressive matrix cracking provokes a re-distribution of the stress fields on each lamina within laminates, which greatly deteriorates the stress distributed in the primary load-bearing lamina and leads to the final failure of the laminates, is introduced for the construction of the failure criterion. The effects of lamina properties, lay-up configurations and loading conditions on the behaviors of the laminates were examined in this paper. A comparison of numerical results obtained from the established model and other existed models and published experimental data was presented for different material systems. The theory predictions demonstrated great match with the experimental observations investigated in this study.
文摘The Object-Attribute-Relationship(OAR)model provides a single model tocapture data structure,behavior properties and knowledge rules in the CAPP application.This paper focuses on how to integrate a variety of different knowledge rules into the OARmodel and how to form transactions against the data structure with these rules in order toimplement intelligent process planning for designed components.The mapping from theOAR to Smalltalk can be directly carried out.It makes the implementation an entirely Ob-ject-Oriented approach.
文摘Design changes for 2D & 3D geometry are the most important features in the process of product design.Constraint modeling for variationl geometry based on geometric reasoning is one of the best approaches for this goal.However,it is difficult for the proposed systems to maintain or handle the consistency and completeness of the constraint model of the design objects.To change this situation,a semantic model and its control approach are presented,aiming at the integration of the data,knowledge and method related to design objects.Aconstraint definition system for in- teractively defining the semantic model and a prototype modeler based on the semantic model are also implemented to examine the idea which is extended to 3D geometric design too.
文摘A new geometric constraint model is described, which is hierarchical and suitable for parametric feature based modeling. In this model, different levels of geometric information are represented to support various stages of a design process. An efficient approach to parametric featu-re based modeling is also presented, adopting the high level geometric constraint model. The low level geometric model such as B-reps can be derived automatically from the high level geometric constraint model, enabling designers to perform their task of detailed design.
基金This project is supported by National Natural Science Foundation of China (No.60375020, No.50305033, No.50405037)973 Program of China (N0.2002CB312106, No.2004CB719400)863 Program of China (No.2003-AA413310)Special Research Foundation of Ministry of Education for PhD Project in Colleges, China (No.20020335112).
文摘A unilateral non-penetration constraint dynamical simulation model withfriction is constructed based on compliant model for mechanical system VP (virtual prototyping)simulation. This model combines computer graphics with multi-body system dynamics. It avoidshandling multiplicity of solution, such as cases of no solution, multi-solution brought about byfriction during traditional construction of non-penetration constraint based on rigid model. At thesame time, the realism of VE (virtual environment) is improved in process of simulation.Furthermore, the valid condition of rolling and sliding unilateral contact is constituted based onsingular perturbation and linear complementary theory. Finally, the compliant method is verified byan interaction between a multi-legged robot and VE.
基金This project is supported by National Natural Science Foundation of China, Nations 863/CIMS Plan,Doctor Foundation of National
文摘On the research of assembly modeling of mechanical products,current CAD systems can only support the design Process of component-to-assembly. It is difficult to realize the design process of assembly-to -component.The theory of self-organizing assembly modeling based on relational constraints is proposed, which implements the product design of assembly-to-component commencing with conceptual design and supporting abstract design and step-nice refinement design.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11572025,11202013 and 51420105008
文摘To shed light on the subgrid-seale （SGS） modeling methodology of nonlinear systems such as the Navier-Stokes turbulence, we define the concepts of assumption and restriction in the modeling procedure, which are shown by generalized derivation of three general mathematical constraints for different combinations of restrictions. These constraints are verified numerically in a one-dimensional nonlinear advection equation. This study is expected to inspire future research on the SGS modeling methodology of nonlinear systems.
基金supported by the Aeronautics Science Foundation of China(No.2007ZC52039)the National Natural Science Foundation of China(No.90816023)
文摘In this paper,an active fault accommodate strategy is proposed for the plant in the presence of actuator fault and input constraints,which is a combination of a direct adaptive control algorithm with multiple model switching.The μ-modification is introduced in the model reference architecture to construct the adaptive controller.The proof of stability is based on the candidate Lyapunov function,while appropriate switching of multiple models guarantees asymptotic tracking of the system states and the boundedness of all signals.Simulation results illustrate the efficiency of the proposed method.
基金Supported by the National Natural Science Foundation of China under Grant No 11275035
文摘We study the cosmic constraint to the wCDM （cold dark matter with a constant equation of state w） model via 118 strong gravitational lensing systems which are compiled from SLA CS, BELLS, LSD and SL2S surveys, where the ratio between two angular diameter distances Dobs =DA（Zl, Zs ） / D A （ O, Zs ） is taken as a cosmic observable. To obtain this ratio, we adopt two strong tensing models： one is the singular isothermal sphere model （SIS） and the other one is the power-law density profile （PLP） model. Via the Markov chain Monte Carlo method, the posterior distribution of the cosmological model parameters space is obtained. The results show that the cosmological model parameters are not sensitive to the parameterized forms of the power-law index γ. Furthermore, the PLP model gives a relatively tighter constraint to the cosmological parameters than that of the SIS model. The predicted value of Ωm = 0.31＋0.44 -0.24 by the SIS model is compatible with that obtained by P1anck2015： Ωm = 0.313 ± 0.013. However, the value of Ωm =0.15＋0.13 -0.11 based on the PLP model is smaller and has 1.25σ tension with that obtained by Planck2015.
文摘Because model switching system is a typical form of Takagi-Sugeno（T-S） model which is an universal approximator of continuous nonlinear systems, we describe the model switching system as mixed logical dynamical （MLD） system and use it in model predictive control （MPC） in this paper. Considering that each local model is only valid in each local region,we add local constraints to local models. The stability of proposed multi-model predictive control （MMPC） algorithm is analyzed, and the performance of MMPC is also demonstrated on an inulti-multi-output（MIMO） simulated pH neutralization process.
基金Supported by Deep Exploration Technology and Experimentation Project(201311194-04)
文摘A new scheme of adaptive control is proposed for a class of linear time-invariant（ LTI） dynamical systems,especially in aerospace,with matched parametric uncertainties and input constraints. Based on a typical and conventional direct model reference adaptive control scheme,various modifications have been employed to achieve the goal. ＂C omposite model reference adaptive control＂of higher performance is seam-lessly combined with ＂positive μ-mod＂,which consequently results in a smooth tracking trajectory despite of the input constraints. In addition,bounded-gain forgetting is utilized to facilitate faster convergence of parameter estimates. The stability of the closed-loop systemcan be guaranteed by using Lyapunov theory.The merits and effectiveness of the proposed method are illustrated by a numerical example of the longitudinal dynamical systems of a fixed-wing airplane.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11175077 and 11575075the Natural Science Foundation of Liaoning Province under Grant No L201683666
文摘We study and derive the energy conditions in generalized non-local gravity, which is the modified theory of general relativity obtained by adding a term m2n-2R□-nRto the Einstein-Hilbert action. Moreover, to obtain some insight on the meaning of the energy conditions, we illustrate the evolutions of four energy conditions with the model parameter ε for different n. By analysis we give the constraints on the model parameters ε.
文摘In remote areas far from the grid, wind/PV/storage generating system is relatively a good choice, whatever in resource configuration, performance or prices. For the independent hybrid power system, the output models of wind turbines, photovoltaic arrays and batteries are built in this paper, and based on the objectives of the capacity configuration optimal model, constraints used in the process of capacity configuration are analyzed. These provide convenient conditions and theoretical basis for the optimal capacity configuration of independent wind/PV/storage system.
基金supported in part by 973 Program(2010CB328204)NSFC project(60932004)RFDP Project(20090005110013)
文摘Because of explosive growth in Internet traffic and high complexity of heterogeneous networks, improving the routing and wavelength assignment （RWA） algorithm in underlying optical networks has become very important. Where there are multiple links between different the node pairs, a traditional wavelength-assignment algorithm may be invalid for a wavelength-switched optical networks （WSON） that has directional blocking constraints. Also, impairments in network nodes and subsequent degradation of optical signals may cause modulation failure in the optical network. In this paper, we propose an RWA algorithm based on a novel evaluation model for a WSQN that has multiple constraints. The algorithm includes comprehensive evaluation model （CEM） and directional blocking constraint RWA based on CEM （DB-RWA）. Diverse constraints are abstracted into various constraint conditions in order to better assign routing and wavelength. We propose using the novel CEM to optimize routing according to an assessed value of constraints on transmission performance. This eliminates the effects of physical transmission impairments in a WSON. DB-RWA based on CEM abstracts directional blocking conditions in multiple links between network nodes into directional blocking constraints. It also satisfies rigorous network specifications and provides flexibility, scalability, and first-fit rate for the backbone, especially in multiple links between WSON nodes.
文摘Feasibility analysis of soft constraints for input and output variables is critical for model predictive control(MPC).When encountering the infeasible situation, some way should be found to adjust the constraints to guarantee that the optimal control law exists. For MPC integrated with soft sensor, considering the soft constraints for critical variables additionally makes it more complicated and difficult for feasibility analysis and constraint adjustment. Therefore, the main contributions are that a linear programming approach is proposed for feasibility analysis, and the corresponding constraint adjustment method and procedure are given as well. The feasibility analysis gives considerations to the manipulated, secondary and critical variables, and the increment of manipulated variables as well. The feasibility analysis and the constraint adjustment are conducted in the entire control process and guarantee the existence of optimal control. In final, a simulation case confirms the contributions in this paper.
基金The project supported by the State Key Laboratory for Structural Analysis of Industrial Equipment,Dalian University of Technology.
文摘A new exist-null combined model is proposed for the structural topology optimization. The model is applied to the topology optimization of the truss with stress constraints. Satisfactory computational result can be obtained with more rapid and more stable convergence as compared with the cross-sectional optimization. This work also shows that the presence of independent and continuous topological variable motivates the research of structural topology optimization.
文摘An approach of stochastically statistical mechanics and a unified molecular theory of nonlinear viscoelasticity with constraints of Nagai chain entanglement for polymer melts have been proposed. A multimode model structure for a single polymer chain with n tail segments and N reversible entanglement sites on the test polymer chain is developed. Based on the above model structure and the mechanism of molecular flow by the dynamical reorganization of entanglement sites, the probability distribution function of the end-to-end vectr for a single polymer chain at entangled state and the viscoelastic free energy of deformation for polymer melts are calculated by using the method of the stochastically statistical mechanics. The four types of stress-strain relation and the memory function are derived from this thery. The above theoretical relations are verified by the experimentaf data for various polymer melts. These relations are found to be in good agreement with the experimental results
文摘Life arose as a non-equilibrium thermodynamic process to dissipate the photon potential generated by the hot Sun and cold outer space. Evidence from the geochemical record of the evolutionary history of life on Earth suggests that life originated in a hot aqueous environment dissipating UV light and evolved later to dissipate visible light. This evidence places constraints on models of solar origin and evolution. The standard solar model seems less compatible with the data than does the pulsar centered solar model.
文摘This paper investigates State Space Model Predictive Control (SSMPC) of an aerothermic process. It is a pilot scale heating and ventilation system equipped with a heater grid and a centrifugal blower, fully connected through a data acquisition system for real time control. The interaction between the process variables is shown to be challenging for single variable controllers, therefore multi-variable control is worth considering. A multi-variable state space model is obtained from on-line experimental data. The controller design is translated into a Quadratic Programming (QP) problem, in which a cost function subject to actuators linear inequality constraints is minimized. The outcome of the experimental results is that the main control objectives, such as set-point tracking and perturbations rejection under actuators constraints, are well achieved for both controlled variables simultaneously.
