Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening pa...Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.展开更多
The generalized rheological tests on sandstone were conducted under both dynamic stress and seepage fields.The results demonstrate that the rheological strain of the specimen under increased stress conditions is great...The generalized rheological tests on sandstone were conducted under both dynamic stress and seepage fields.The results demonstrate that the rheological strain of the specimen under increased stress conditions is greater than that under creep conditions,indicating that the dynamic stress field significantly influences the rheological behaviours of sandstone.Following the rheological tests,the number of small pores in the sandstone decreased,while the number of medium-sized pores increased,forming new seepage channels.The high initial rheological stress accelerated fracture compression and the closure of seepage channels,resulting in reduction in the permeability of sandstone.Based on the principles of generalized rheology and the experimental findings,a novel rock rheological constitutive model incorporating both the dynamic stress field and seepage properties has been developed.Numerical simulations of surrounding rock deformation in geotechnical engineering were carried out using a secondary development version of this model,which confirmed the applicability of the generalized rheological numerical simulation method.These results provide theoretical support for the long-term stability evaluation of engineering rock masses and for predicting the deformation of surrounding rock.展开更多
A novel fractional elastoplastic constitutive model is proposed to accurately characterize the deformation of sandstone under true-triaxial stress states.This model is founded on the yield function and the fractional ...A novel fractional elastoplastic constitutive model is proposed to accurately characterize the deformation of sandstone under true-triaxial stress states.This model is founded on the yield function and the fractional flow rule.The yield function includes parameters that govern the evolution of yield surface,enabling an accurate description of three-dimensional stress states.The direction of plastic flow is governed by the two different fractional orders,which are functions of the plastic internal variable.Additionally,a detailed process is proposed for identifying the yield function parameters and fractional orders.Subsequently,the relationship between the fractional order and the direction of plastic flow in the meridian and deviatoric planes is examined,characterized by the dilation angle and the plastic deflection angle,respectively.The non-orthogonal flow rule,also referred to as the fractional flow rule,allows for a border range of plastic deflection and dilation angles compared to the orthogonal flow rule,thereby significantly enhancing its applicability.The validity and accuracy of proposed model are verified by comparing the analytical solution of the constitutive model with the experimental data.A comparison between the non-orthogonal flow rule and orthogonal flow rule is conducted in both the deviatoric and meridian planes.The further comparison of the stress-strain curves for the non-orthogonal and orthogonal flow rules demonstrates the superiority of the fractional constitutive model.展开更多
Investigating the combined effects of mining damage and creep damage on slope stability is crucial,as it can comprehensively reveal the non-linear deformation characteristics of rock under their joint influence.This s...Investigating the combined effects of mining damage and creep damage on slope stability is crucial,as it can comprehensively reveal the non-linear deformation characteristics of rock under their joint influence.This study develops a fractional-order nonlinear creep constitutive model that incorporates the double damage effect and implements a non-linear creep subroutine for soft rock using the threedimensional finite difference method on the FLAC3D platform.Comparative analysis of the theoretical,numerical,and experimental results reveals that the fractional-order constitutive model,which incorporates the double damage effect,accurately reflects the distinct deformation stages of green mudstone during creep failure and effectively captures the non-linear deformation in the accelerated creep phase.The numerical results show a fitting accuracy exceeding 97%with the creep test curves,significantly outperforming the 61%accuracy of traditional creep models.展开更多
Coral reef limestone(CRL)constitutes a distinctive marine carbonate formation with complex mechanical properties.This study investigates the multiscale damage and fracture mechanisms of CRL through integrated experime...Coral reef limestone(CRL)constitutes a distinctive marine carbonate formation with complex mechanical properties.This study investigates the multiscale damage and fracture mechanisms of CRL through integrated experimental testing,digital core technology,and theoretical modelling.Two CRL types with contrasting mesostructures were characterized across three scales.Macroscopically,CRL-I and CRL-II exhibited mean compressive strengths of 8.46 and 5.17 MPa,respectively.Mesoscopically,CRL-I featured small-scale highly interconnected pores,whilst CRL-II developed larger stratified pores with diminished connectivity.Microscopically,both CRL matrices demonstrated remarkable similarity in mineral composition and mechanical properties.A novel voxel average-based digital core scaling methodology was developed to facilitate numerical simulation of cross-scale damage processes,revealing network-progressive failure in CRL-I versus directional-brittle failure in CRL-II.Furthermore,a damage statistical constitutive model based on digital core technology and mesoscopic homogenisation theory established quantitative relationships between microelement strength distribution and macroscopic mechanical behavior.These findings illuminate the fundamental mechanisms through which mesoscopic structure governs the macroscopic mechanical properties of CRL.展开更多
The undrained mechanical behavior of unsaturated completely weathered granite(CWG)is highly susceptible to alterations in the hydraulic environment,particularly under uniaxial loading conditions,due to the unique natu...The undrained mechanical behavior of unsaturated completely weathered granite(CWG)is highly susceptible to alterations in the hydraulic environment,particularly under uniaxial loading conditions,due to the unique nature of this soil type.In this study,a series of unconfined compression tests were carried out on unsaturated CWG soil in an underground engineering site,and the effects of varying the environmental variables on the main undrained mechanical properties were analyzed.Based on the experimental results,a novel constitutive model was then established using the damage mechanics theory and the undetermined coefficient method.The results demonstrate that the curves of remolded CWG specimens with different moisture contents and dry densities exhibited diverse characteristics,including brittleness,significant softening,and ductility.As a typical indicator,the unconfined compression strength of soil specimens initially increased with an increase in moisture content and then decreased.Meanwhile,an optimal moisture content of approximately 10.5%could be observed,while a critical moisture content value of 13.0%was identified,beyond which the strength of the specimen decreases sharply.Moreover,the deformation and fracture of CWG specimens were predominantly caused by shear failure,and the ultimate failure modes were primarily influenced by moisture content rather than dry density.Furthermore,by comparing several similar models and the experimental data,the proposed model could accurately replicate the undrained mechanical characteristics of unsaturated CWG soil,and quantitatively describe the key mechanical indexes.These findings offer a valuable reference point for understanding the underlying mechanisms,anticipating potential risks,and implementing effective control measures in similar underground engineering projects.展开更多
Understanding the mesoscopic tensile fracture damage of rock is the basis of evaluating the deterioration process of mechanical properties of heat-damaged rock. For this, tensile tests of rocks under high-temperature ...Understanding the mesoscopic tensile fracture damage of rock is the basis of evaluating the deterioration process of mechanical properties of heat-damaged rock. For this, tensile tests of rocks under high-temperature treatment were conducted with a ϕ75 mm split Hopkinson tension bar (SHTB) to investigate the mesoscopic fracture and damage properties of rock. An improved scanning electron microscopy (SEM) experimental method was used to analyze the tensile fracture surfaces of rock samples. Qualitative and quantitative analyses were performed to assess evolution of mesoscopic damage of heat-damaged rock under tensile loading. A constitutive model describing the mesoscopic fractal damage under thermo-mechanical coupling was established. The results showed that the high temperatures significantly reduced the tensile strength and fracture surface roughness of the red sandstone. The three-dimensional (3D) reconstruction of the fracture surface of the samples that experienced tensile failure at 900 °C showed a flat surface. The standard deviation of elevation and slope angle of specimen fracture surface first increased and then decreased with increasing temperature. The threshold for brittle fracture of the heat-damaged red sandstone specimens was 600 °C. Beyond this threshold temperature, local ductile fracture occurred, resulting in plastic deformation of the fracture surface during tensile fracturing. With increase of temperature, the internal meso-structure of samples was strengthened slightly at first and then deteriorated gradually, which was consistent with the change of macroscopic mechanical properties of red sandstone. The mesoscopic characteristics, such as the number, mean side length, maximum area, porosity, and fractal dimension of crack, exhibited an initial decline, followed by a gradual increase. The development of microcracks in samples had significant influence on mesoscopic fractal dimension. The mesoscopic fractal characteristics were used to establish a mesoscopic fractal damage constitutive model for red sandstone, and the agreement between the theoretical and experimental results validated the proposed model.展开更多
A new unified constitutive model was developed to predict the two-stage creep-aging(TSCA)behavior of Al-Zn-Mg-Cu alloys.The particular bimodal precipitation feature was analyzed and modeled by considering the primary ...A new unified constitutive model was developed to predict the two-stage creep-aging(TSCA)behavior of Al-Zn-Mg-Cu alloys.The particular bimodal precipitation feature was analyzed and modeled by considering the primary micro-variables evolution at different temperatures and their interaction.The dislocation density was incorporated into the model to capture the effect of creep deformation on precipitation.Quantitative transmission electron microscopy and experimental data obtained from a previous study were used to calibrate the model.Subsequently,the developed constitutive model was implemented in the finite element(FE)software ABAQUS via the user subroutines for TSCA process simulation and the springback prediction of an integral panel.A TSCA test was performed.The result shows that the maximum radius deviation between the formed plate and the simulation results is less than 0.4 mm,thus validating the effectiveness of the developed constitutive model and FE model.展开更多
The study focuses on the creep characteristics of significant yellow sandstone for water conservancy, hydropower, and other waterrelated slope excavation unloading rock-graded loading creep characteristics. It conduct...The study focuses on the creep characteristics of significant yellow sandstone for water conservancy, hydropower, and other waterrelated slope excavation unloading rock-graded loading creep characteristics. It conducts a uniaxial graded loading creep test on yellow sandstone under different pre-peak unloading and wetting-drying cycles. The improved nonlinear Nishihara model was obtained by introducing a nonlinear viscous element with an accelerated creep threshold switch. The sensitivity characteristics of the parameters of the improved creep model were analyzed and a nonlinear creep constitutive model was established, considering the unloading-cyclic intrinsic damage induced by water intrusion. The research results show that:(1)With an increase in the unloading point, the porosity of the rock samples initially decreases and then increases. As the number of cyclic water intrusions rises, the porosity of the rock samples gradually increases, reaching a maximum of 9.58% at an unloading point of 70% uniaxial compression stress(0.7 Rc) after five cycles.(2) Total creep deformation increases with the number of cyclic water intrusions;however, with an increase in the unloading ratio, the original samples show an initial decrease, followed by an increase in creep deformation. With a higher unloading ratio and various instances of cyclic water intrusion, the total creep time of the rock samples,compared to the original samples, is reduced by 21.8%and 23.02%. The creep damage mode gradually changes from shear damage to tensile damage.(3) The sensitivity characteristics of the improved creep model parameters show that transient elasticity modulus E1 is affected by the coupling of unloading and cyclic water intrusion. The viscoelastic modulus E2 and viscous coefficient η1 are mainly affected by unloading and cyclic water intrusion.(4) Based on the strain equivalence principle of damage mechanics, the damage treatment of the parameters in the original model is improved to construct a nonlinear creep constitutive model that considers unloading-cyclic water intrusion damage. A parameter inversion and comparison to the traditional Nishihara model reveal an average relative standard deviation of 0.271%,significantly less than 1%, indicating a more accurate nonlinear creep constitutive model. The research results are crucial for analyzing the long-term stability of water-related steep rocky slopes post-excavation and unloading and for preventing and controlling creep-type landslide disasters.展开更多
The hot deformation behavior of as-extruded Ti-6554 alloy was investigated through isothermal compression at 700–950°C and 0.001–1 s^(−1).The temperature rise under different deformation conditions was calculat...The hot deformation behavior of as-extruded Ti-6554 alloy was investigated through isothermal compression at 700–950°C and 0.001–1 s^(−1).The temperature rise under different deformation conditions was calculated,and the curve was corrected.The strain compensation constitutive model of as-extruded Ti-6554 alloy based on temperature rise correction was established.The microstructure evolution under different conditions was analyzed,and the dynamic recrystallization(DRX)mechanism was revealed.The results show that the flow stress decreases with the increase in strain rate and the decrease in deformation temperature.The deformation temperature rise gradually increases with the increase in strain rate and the decrease in deformation temperature.At 700°C/1 s^(−1),the temperature rise reaches 100°C.The corrected curve value is higher than the measured value,and the strain compensation constitutive model has high prediction accuracy.The precipitation of theαphase occurs during deformation in the twophase region,which promotes DRX process of theβphase.At low strain rate,the volume fraction of dynamic recrystallization increases with the increase in deformation temperature.DRX mechanism includes continuous DRX and discontinuous DRX.展开更多
The internal pressure within fission gas bubbles(FGBs)in irradiated nuclear fuels drives mechanical interactions with the surrounding fuel skeleton.To investigate the micromechanical stress fields in irradiated nuclea...The internal pressure within fission gas bubbles(FGBs)in irradiated nuclear fuels drives mechanical interactions with the surrounding fuel skeleton.To investigate the micromechanical stress fields in irradiated nuclear fuels containing pressurized FGBs,a mechanical constitutive model for the equivalent solid of FGBs was developed and validated.This model was based on the modified Van der Waals equation,incorporating the effects of surface tension.Using this model,the micromechanical fields in irradiated U-10Mo fuels with randomly distributed FGBs were calculated during uniaxial tensile testing via the finite element(FE)method.The macroscopic elastic constants of the irradiated U-10Mo fuels were then derived using homogenization theory,and the influences of bubble pressure,bubble size,and porosity on these constants were examined.Results show that adjacent FGBs exhibit mechanical interactions,which leads to distinct stress concentrations in the surrounding fuel skeleton.The macroscopic elastic constants of irradiated U-10Mo fuels decrease with increasing the macroscopic porosity,which can be quantitatively described by the Mori-Tanaka model.In contrast,bubble pressure and size have negligible effects on these constants.展开更多
The creep deformation and mechanical properties of 2219 aluminum alloy were experimentally investigated under both tension and compression at the temperature of 165℃for different time.The results indicated that the c...The creep deformation and mechanical properties of 2219 aluminum alloy were experimentally investigated under both tension and compression at the temperature of 165℃for different time.The results indicated that the creep deformation under tensile stress was greater than that under compressive stress.As the stress level increases,the compressive creep rate showed more significant increase.The yield strength after compressive stress creep-ageing was higher than that after stress-free ageing,with the lowest strength observed in the tensile-aged sample.Overall,the average phase length after compressive stress creep-ageing was larger than after tensile stress ageing.Under tensile stress,the number and size of precipitates at small angles to the stress direction were larger than those perpendicular to the stress direction.In contrast,under compressive stress,this relationship was reversed,and the preferential orientation of phases became more pronounced with ageing time.A unified,physics-based creep-ageing constitutive model,accounting for the orientation of precipitation,was developed for both tensile and compressive stress conditions.The predicted results were in good agreement with the experimental data.These findings,along with the developed model,provide a theoretical and simulation basis for precise creep-ageing forming of components under complex stresses.展开更多
To investigate the effects of water and cyclic loading on dolomite’s mechanical properties during deep mining,mechanical experiments on non-pressure water absorption and cyclic loading were conducted.The findings rev...To investigate the effects of water and cyclic loading on dolomite’s mechanical properties during deep mining,mechanical experiments on non-pressure water absorption and cyclic loading were conducted.The findings reveal that the elastic modulus and Poisson ratio of dolomite fluctuate with increasing water content.The mass of water absorption is positively correlated with time and the water absorption stage can be divided into three stages:accelerated,decelerated,and stabilized stages.During this process,the number of pores in dolomite increases,while the pore diameter initially decreases and then fluctuates.Microscopic analysis shows that the proportion of mesopores first increases and then decreases,while micropores exhibit the opposite trend,and the proportion of macropores fluctuates around 0%.A model diagram of structural evolution during water absorption has been developed.Additionally,the softening process of dolomite’s water absorption strength is categorized into three stages:a relatively stable stage,an accelerated softening stage dominated by mesopore water absorption,and a decelerated softening stage characterized by micropore water absorption.A uniaxial damage constitutive model for dolomite under water influence was established based on the Weibull distribution and Mohr-Coulomb strength criterion,and experimental validation indicates its strong applicability.展开更多
Prolonged cyclic water intrusion has progressively developed joints in the hydro-fluctuation belt,elevating the instability risk of reservoir bank slopes.To investigate its impact on joint shear damage evolution,joint...Prolonged cyclic water intrusion has progressively developed joints in the hydro-fluctuation belt,elevating the instability risk of reservoir bank slopes.To investigate its impact on joint shear damage evolution,joint samples were prepared using three representative roughness curves and subjected to direct shear testing following cyclic water intrusion.A shear damage constitutive model considering the coupling effect of cyclic water intrusion and load was developed based on macroscopic phenomenological damage mechanics and micro-statistical theory.Results indicate:(1)All critical shear mechanical parameters(including peak shear strength,shear stiffness,basic friction angle,and joint compressive strength)exhibit progressive deterioration with increasing water intrusion cycles;(2)Model validation through experimental curve comparisons confirms its reliability.The model demonstrates that intensified water intrusion cycles reduce key mechanical indices,inducing a brittle-to-ductile transition in joint surface deformation—a behavior consistent with experimental observations;(3)Damage under cyclic water intrusion and load coupling follows an S-shaped trend,divided into stabilization(water-dominated stage),development(load-dominated stage),and completion stages.The research provides valuable insights for stability studies,such as similar model experiments for reservoir bank slopes and other water-related projects.展开更多
The performance of welded Ni-based superalloys at high temperatures is essential to be evaluated due to their particular service environment for aero-engines and high-speed aircrafts.The tensile properties and related...The performance of welded Ni-based superalloys at high temperatures is essential to be evaluated due to their particular service environment for aero-engines and high-speed aircrafts.The tensile properties and related microstructural evolutions such as the carbide precipitate and grain of a laser-welded Ni-based alloy were experimentally and numerically investigated at different temperatures(20,300,500,800℃).The results show that at room temperature,the strength of the Base Material(BM)was slightly smaller,with a difference of less than 1%,than the Welded Material(WM),which can be attributed to the more uniformly distributed needle-shaped carbide precipitates in the WM than those nonuniformly coarser spherical ones in the BM.While at 300℃ and 500℃,the strength of WM decreased more obviously compared with that of BM due to the more apparent growth of grain:13.52%loss in yield strength in WM alloys as compared with BM alloys at 300℃,and 16.57% at 500℃.At 800℃,the strength of BM and WM both decreased to a similar level due to Dynamic Recrystallization(DRX).However,a much higher elongation was observed for the BM than WM(less than 50%of BM),which can be attributed to the enhanced dislocation accumulation capability of the large spherical carbides along grain boundaries on the fracture surface in BM.Furthermore,a unified model considering the welding effects on both microstructures(dislocation,carbides,and grain)and mechanical properties evolutions at different temperatures was developed and validated.Based on this model,the key temperature ranges(20–600℃)where apparent weakening of strength and uniform plasticity occurs for welded structures were identified,providing a direct guidance for potential structure and process design.展开更多
The inelastic behavior of thermoplastic polymers may involve shearing and crazing,and both depend on temperature and strain rate.Traditional constitutive models account for temperature and strain rate through phenomen...The inelastic behavior of thermoplastic polymers may involve shearing and crazing,and both depend on temperature and strain rate.Traditional constitutive models account for temperature and strain rate through phenomenological or empirical formulas.In this study,we present a physics-guided machine learning(ML)framework to model shear and craze in polymeric materials.The effects of all three principal stresses for the craze initiation are considered other than the maximum tensile principal stress solely in previous works.We implemented a finite element framework through a user-defined material subroutine and applied the constitutive model to the deformation in three polymers(PLA 4060D,PLA 3051D,and HIPS).The result shows that our ML-based model can predict the stress-strain and volume-strain responses at different strain rates with high accuracy.Notably,the ML-based approach needs no assumptions about yield criteria or hardening laws.This work highlights the potential of hybrid physics-ML paradigms to overcome the trade-offs between model complexity and accuracy in polymer mechanics,paving the way for computationally efficient and generalizable constitutive models for thermoplastic materials.展开更多
The constitutive model is essential for predicting the deformation and stability of rocksoil mass.The estimation of constitutive model parameters is a necessary and important task for the reliable characterization of ...The constitutive model is essential for predicting the deformation and stability of rocksoil mass.The estimation of constitutive model parameters is a necessary and important task for the reliable characterization of mechanical behaviors.However,constitutive model parameters cannot be evaluated accurately with a limited amount of test data,resulting in uncertainty in the prediction of stress-strain curves.This paper proposes a Bayesian analysis framework to address this issue.It combines the Bayesian updating with the structural reliability and adaptive conditional sampling methods to assess the equation parameter of constitutive models.Based on the triaxial and ring shear tests on shear zone soils from the Huangtupo landslide,a statistical damage constitutive model and a critical state hypoplastic constitutive model were used to demonstrate the effectiveness of the proposed framework.Moreover,the parameter uncertainty effects of the damage constitutive model on landslide stability were investigated.Results show that reasonable assessments of the constitutive model parameter can be well realized.The variability of stress-strain curves is strongly related to the model prediction performance.The estimation uncertainty of constitutive model parameters should not be ignored for the landslide stability calculation.Our study provides a reference for uncertainty analysis and parameter assessment of the constitutive model.展开更多
The mechanical properties of bedding rock in cold regions are frequently affected by freeze-thaw(F-T)cycles and ani-sotropy.Research on the mechanical characteristics of rock damage under the combined action of F-T an...The mechanical properties of bedding rock in cold regions are frequently affected by freeze-thaw(F-T)cycles and ani-sotropy.Research on the mechanical characteristics of rock damage under the combined action of F-T and bedding angles is limited,and most traditional rock damage models cannot accurately capture these characteristics.We performed axial compression tests to ex-plore the strength characteristics of bedding slates at the bedding angles ofβ=0°,30°,45°,60°,and 90°under various F-T cycles.The experimental findings suggest that the elastic modulus and uniaxial compressive strength of the slate declined exponentially as the number of F-T cycles increased.Axial compressive strength was characterized by a U-shaped tendency with the bedding angle.This study proposes a damage model for the uniaxial compressive strength of transversely isotropic rock,which integrates the F-T effect,utilizing the enhanced anisotropic Hoek-Brown strength criterion and a statistical damage model.This model was validated using experimental data.This statistical damage model can precisely capture the dual attributes of rock mass strength reduction with F-T cy-cles and variations arising from the loading direction.展开更多
This study presents new methods to effectively model the anisotropic yielding and hardening behavior of laser powder bed fusion fabricated aluminum alloy under both monotonic and cyclic loading conditions.The proposed...This study presents new methods to effectively model the anisotropic yielding and hardening behavior of laser powder bed fusion fabricated aluminum alloy under both monotonic and cyclic loading conditions.The proposed model combines the yield surface-interpolation method to accurately describe the anisotropic hardening rates in various directions,with the Chaboche kinematic hardening rule to precisely reflect the cyclic characteristics.For numerical implementation of the combined anisotropic and cyclic constitutive model,a fully implicit stress integration algorithm based on return mapping method is provided.Moreover,the multiple parameters associated with the model are categorized and identified in an uncoupled manner.The isotropic and cyclic hardening parameters are determined by an inverse method,and the stability of the optimization outcomes is validated by applying different starting points for the parameters.Particularly,the back-stress effect on the identification of anisotropic parameters associated with the stress invariant-based Hill48 yield function is considered for the first time.This consideration leads to an improved prediction accuracy compared to the identification of anisotropic parameters without considering back-stress effect.The combined anisotropic and cyclic constitutive model,along with the calibrated parameters,are proven capable of accurately reproducing the intricate deformation behavior of laser powder bed fusion fabricated AlSi10Mg.展开更多
The study of the mechanical property and damage state of coal materials under compression is a fundamental area of research in underground mining engineering.Drawing upon the compaction effect and linear energy dissip...The study of the mechanical property and damage state of coal materials under compression is a fundamental area of research in underground mining engineering.Drawing upon the compaction effect and linear energy dissipation(LED)law,a novel compressive damage constitutive model for brittle coal is proposed.Utilizing the energy-defined damage method for mate-rials,the LED law is innovatively introduced to accurately characterize the energy dissipation during the loading process,and a novel formula for characterizing the damage variable of brittle coal is proposed.On this basis,considering that the constitutive model based on the hypothesis of strain equivalence is incapable of accurately describing the compaction effect exhibited by coal material during the compression process,a correction coefficient is proposed and apply it in the novel damage constitutive model.The established conventional monotone loading and single-cyclic loading-unloading uniaxial compression damage constitutive models have been validated using experimental data from cylindrical and cuboid coal specimens.In addition,compared with the constitutive model obtained via the traditional energy calculation method based on the hypothesis that the unloading curve is a straight line,the constitutive model employing LED law can describe the stress-strain state of brittle coal more precisely.This approach introduces a new perspective and enhances the convenience for constructing the constitutive model based on energy theory.展开更多
基金financial support of the National Natural Science Foundation of China(No.52371103)the Fundamental Research Funds for the Central Universities,China(No.2242023K40028)+1 种基金the Open Research Fund of Jiangsu Key Laboratory for Advanced Metallic Materials,China(No.AMM2023B01).financial support of the Research Fund of Shihezi Key Laboratory of AluminumBased Advanced Materials,China(No.2023PT02)financial support of Guangdong Province Science and Technology Major Project,China(No.2021B0301030005)。
文摘Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.
基金supported and financed by Scientific Research Foundation for High-level Talents of Anhui University of Science and Technology (No.2024yjrc96)Anhui Provincial University Excellent Research and Innovation Team Support Project (No.2022AH010053)+2 种基金National Key Research and Development Program of China (Nos.2023YFC2907602 and 2022YFF1303302)Anhui Provincial Major Science and Technology Project (No.202203a07020011)Open Foundation of Joint National-Local Engineering Research Centre for Safe and Precise Coal Mining (No.EC2023020)。
文摘The generalized rheological tests on sandstone were conducted under both dynamic stress and seepage fields.The results demonstrate that the rheological strain of the specimen under increased stress conditions is greater than that under creep conditions,indicating that the dynamic stress field significantly influences the rheological behaviours of sandstone.Following the rheological tests,the number of small pores in the sandstone decreased,while the number of medium-sized pores increased,forming new seepage channels.The high initial rheological stress accelerated fracture compression and the closure of seepage channels,resulting in reduction in the permeability of sandstone.Based on the principles of generalized rheology and the experimental findings,a novel rock rheological constitutive model incorporating both the dynamic stress field and seepage properties has been developed.Numerical simulations of surrounding rock deformation in geotechnical engineering were carried out using a secondary development version of this model,which confirmed the applicability of the generalized rheological numerical simulation method.These results provide theoretical support for the long-term stability evaluation of engineering rock masses and for predicting the deformation of surrounding rock.
基金sponsored by the National Natural Science Foundation of China(Grant No.42141010).
文摘A novel fractional elastoplastic constitutive model is proposed to accurately characterize the deformation of sandstone under true-triaxial stress states.This model is founded on the yield function and the fractional flow rule.The yield function includes parameters that govern the evolution of yield surface,enabling an accurate description of three-dimensional stress states.The direction of plastic flow is governed by the two different fractional orders,which are functions of the plastic internal variable.Additionally,a detailed process is proposed for identifying the yield function parameters and fractional orders.Subsequently,the relationship between the fractional order and the direction of plastic flow in the meridian and deviatoric planes is examined,characterized by the dilation angle and the plastic deflection angle,respectively.The non-orthogonal flow rule,also referred to as the fractional flow rule,allows for a border range of plastic deflection and dilation angles compared to the orthogonal flow rule,thereby significantly enhancing its applicability.The validity and accuracy of proposed model are verified by comparing the analytical solution of the constitutive model with the experimental data.A comparison between the non-orthogonal flow rule and orthogonal flow rule is conducted in both the deviatoric and meridian planes.The further comparison of the stress-strain curves for the non-orthogonal and orthogonal flow rules demonstrates the superiority of the fractional constitutive model.
基金support from the National Natural Science Foundation of China(No.52308316)the Scientific Research Foundation of Weifang University(Grant No.2024BS42)+2 种基金China Postdoctoral Science Foundation(No.2022M721885)the Key Laboratory of Rock Mechanics and Geohazards of Zhejiang Province(No.ZJRMG-2022-01)supported by Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences(NO.SKLGME023017).
文摘Investigating the combined effects of mining damage and creep damage on slope stability is crucial,as it can comprehensively reveal the non-linear deformation characteristics of rock under their joint influence.This study develops a fractional-order nonlinear creep constitutive model that incorporates the double damage effect and implements a non-linear creep subroutine for soft rock using the threedimensional finite difference method on the FLAC3D platform.Comparative analysis of the theoretical,numerical,and experimental results reveals that the fractional-order constitutive model,which incorporates the double damage effect,accurately reflects the distinct deformation stages of green mudstone during creep failure and effectively captures the non-linear deformation in the accelerated creep phase.The numerical results show a fitting accuracy exceeding 97%with the creep test curves,significantly outperforming the 61%accuracy of traditional creep models.
基金National Key Research and Development Program of China (No.2021YFC3100800)the National Natural Science Foundation of China (Nos.42407235 and 42271026)+1 种基金the Project of Sanya Yazhou Bay Science and Technology City (No.SCKJ-JYRC-2023-54)supported by the Hefei advanced computing center
文摘Coral reef limestone(CRL)constitutes a distinctive marine carbonate formation with complex mechanical properties.This study investigates the multiscale damage and fracture mechanisms of CRL through integrated experimental testing,digital core technology,and theoretical modelling.Two CRL types with contrasting mesostructures were characterized across three scales.Macroscopically,CRL-I and CRL-II exhibited mean compressive strengths of 8.46 and 5.17 MPa,respectively.Mesoscopically,CRL-I featured small-scale highly interconnected pores,whilst CRL-II developed larger stratified pores with diminished connectivity.Microscopically,both CRL matrices demonstrated remarkable similarity in mineral composition and mechanical properties.A novel voxel average-based digital core scaling methodology was developed to facilitate numerical simulation of cross-scale damage processes,revealing network-progressive failure in CRL-I versus directional-brittle failure in CRL-II.Furthermore,a damage statistical constitutive model based on digital core technology and mesoscopic homogenisation theory established quantitative relationships between microelement strength distribution and macroscopic mechanical behavior.These findings illuminate the fundamental mechanisms through which mesoscopic structure governs the macroscopic mechanical properties of CRL.
基金Project(42202318)supported by the National Natural Science Foundation of ChinaProject(252300421199)supported by the Natural Science Foundation of Henan Province,ChinaProject(2024JJ6219)supported by the Hunan Provincial Natural Science Foundation of China。
文摘The undrained mechanical behavior of unsaturated completely weathered granite(CWG)is highly susceptible to alterations in the hydraulic environment,particularly under uniaxial loading conditions,due to the unique nature of this soil type.In this study,a series of unconfined compression tests were carried out on unsaturated CWG soil in an underground engineering site,and the effects of varying the environmental variables on the main undrained mechanical properties were analyzed.Based on the experimental results,a novel constitutive model was then established using the damage mechanics theory and the undetermined coefficient method.The results demonstrate that the curves of remolded CWG specimens with different moisture contents and dry densities exhibited diverse characteristics,including brittleness,significant softening,and ductility.As a typical indicator,the unconfined compression strength of soil specimens initially increased with an increase in moisture content and then decreased.Meanwhile,an optimal moisture content of approximately 10.5%could be observed,while a critical moisture content value of 13.0%was identified,beyond which the strength of the specimen decreases sharply.Moreover,the deformation and fracture of CWG specimens were predominantly caused by shear failure,and the ultimate failure modes were primarily influenced by moisture content rather than dry density.Furthermore,by comparing several similar models and the experimental data,the proposed model could accurately replicate the undrained mechanical characteristics of unsaturated CWG soil,and quantitatively describe the key mechanical indexes.These findings offer a valuable reference point for understanding the underlying mechanisms,anticipating potential risks,and implementing effective control measures in similar underground engineering projects.
基金supported by The National Natural Science Foundation of China(Grant Nos.12272411 and 42007259).
文摘Understanding the mesoscopic tensile fracture damage of rock is the basis of evaluating the deterioration process of mechanical properties of heat-damaged rock. For this, tensile tests of rocks under high-temperature treatment were conducted with a ϕ75 mm split Hopkinson tension bar (SHTB) to investigate the mesoscopic fracture and damage properties of rock. An improved scanning electron microscopy (SEM) experimental method was used to analyze the tensile fracture surfaces of rock samples. Qualitative and quantitative analyses were performed to assess evolution of mesoscopic damage of heat-damaged rock under tensile loading. A constitutive model describing the mesoscopic fractal damage under thermo-mechanical coupling was established. The results showed that the high temperatures significantly reduced the tensile strength and fracture surface roughness of the red sandstone. The three-dimensional (3D) reconstruction of the fracture surface of the samples that experienced tensile failure at 900 °C showed a flat surface. The standard deviation of elevation and slope angle of specimen fracture surface first increased and then decreased with increasing temperature. The threshold for brittle fracture of the heat-damaged red sandstone specimens was 600 °C. Beyond this threshold temperature, local ductile fracture occurred, resulting in plastic deformation of the fracture surface during tensile fracturing. With increase of temperature, the internal meso-structure of samples was strengthened slightly at first and then deteriorated gradually, which was consistent with the change of macroscopic mechanical properties of red sandstone. The mesoscopic characteristics, such as the number, mean side length, maximum area, porosity, and fractal dimension of crack, exhibited an initial decline, followed by a gradual increase. The development of microcracks in samples had significant influence on mesoscopic fractal dimension. The mesoscopic fractal characteristics were used to establish a mesoscopic fractal damage constitutive model for red sandstone, and the agreement between the theoretical and experimental results validated the proposed model.
基金supported by the National Key R&D Program of China(No.2021YFB3400900)the National Natural Science Foundation of China(Nos.52175373,52205435)+1 种基金Natural Science Foundation of Hunan Province,China(No.2022JJ40621)the Innovation Fund of National Commercial Aircraft Manufacturing Engineering Technology Center,China(No.COMACSFGS-2022-1875)。
文摘A new unified constitutive model was developed to predict the two-stage creep-aging(TSCA)behavior of Al-Zn-Mg-Cu alloys.The particular bimodal precipitation feature was analyzed and modeled by considering the primary micro-variables evolution at different temperatures and their interaction.The dislocation density was incorporated into the model to capture the effect of creep deformation on precipitation.Quantitative transmission electron microscopy and experimental data obtained from a previous study were used to calibrate the model.Subsequently,the developed constitutive model was implemented in the finite element(FE)software ABAQUS via the user subroutines for TSCA process simulation and the springback prediction of an integral panel.A TSCA test was performed.The result shows that the maximum radius deviation between the formed plate and the simulation results is less than 0.4 mm,thus validating the effectiveness of the developed constitutive model and FE model.
基金We gratefully acknowledge the financial support from the Key Laboratory of Geological Safety of Coastal Urban Underground Space,Ministry of Natural Resources(BHKF2022Y03)Shandong Provincial Colleges and Universities Youth Innovation Technology Support Program,Education Department of Shandong Province(grant number 2023KJ092).
文摘The study focuses on the creep characteristics of significant yellow sandstone for water conservancy, hydropower, and other waterrelated slope excavation unloading rock-graded loading creep characteristics. It conducts a uniaxial graded loading creep test on yellow sandstone under different pre-peak unloading and wetting-drying cycles. The improved nonlinear Nishihara model was obtained by introducing a nonlinear viscous element with an accelerated creep threshold switch. The sensitivity characteristics of the parameters of the improved creep model were analyzed and a nonlinear creep constitutive model was established, considering the unloading-cyclic intrinsic damage induced by water intrusion. The research results show that:(1)With an increase in the unloading point, the porosity of the rock samples initially decreases and then increases. As the number of cyclic water intrusions rises, the porosity of the rock samples gradually increases, reaching a maximum of 9.58% at an unloading point of 70% uniaxial compression stress(0.7 Rc) after five cycles.(2) Total creep deformation increases with the number of cyclic water intrusions;however, with an increase in the unloading ratio, the original samples show an initial decrease, followed by an increase in creep deformation. With a higher unloading ratio and various instances of cyclic water intrusion, the total creep time of the rock samples,compared to the original samples, is reduced by 21.8%and 23.02%. The creep damage mode gradually changes from shear damage to tensile damage.(3) The sensitivity characteristics of the improved creep model parameters show that transient elasticity modulus E1 is affected by the coupling of unloading and cyclic water intrusion. The viscoelastic modulus E2 and viscous coefficient η1 are mainly affected by unloading and cyclic water intrusion.(4) Based on the strain equivalence principle of damage mechanics, the damage treatment of the parameters in the original model is improved to construct a nonlinear creep constitutive model that considers unloading-cyclic water intrusion damage. A parameter inversion and comparison to the traditional Nishihara model reveal an average relative standard deviation of 0.271%,significantly less than 1%, indicating a more accurate nonlinear creep constitutive model. The research results are crucial for analyzing the long-term stability of water-related steep rocky slopes post-excavation and unloading and for preventing and controlling creep-type landslide disasters.
基金National Key R&D Program of China(2022YFB3706901)National Natural Science Foundation of China(52274382)Key Research and Development Program of Hubei Province(2022BAA024)。
文摘The hot deformation behavior of as-extruded Ti-6554 alloy was investigated through isothermal compression at 700–950°C and 0.001–1 s^(−1).The temperature rise under different deformation conditions was calculated,and the curve was corrected.The strain compensation constitutive model of as-extruded Ti-6554 alloy based on temperature rise correction was established.The microstructure evolution under different conditions was analyzed,and the dynamic recrystallization(DRX)mechanism was revealed.The results show that the flow stress decreases with the increase in strain rate and the decrease in deformation temperature.The deformation temperature rise gradually increases with the increase in strain rate and the decrease in deformation temperature.At 700°C/1 s^(−1),the temperature rise reaches 100°C.The corrected curve value is higher than the measured value,and the strain compensation constitutive model has high prediction accuracy.The precipitation of theαphase occurs during deformation in the twophase region,which promotes DRX process of theβphase.At low strain rate,the volume fraction of dynamic recrystallization increases with the increase in deformation temperature.DRX mechanism includes continuous DRX and discontinuous DRX.
基金National Natural Science Foundation of China(12135008,12132005)。
文摘The internal pressure within fission gas bubbles(FGBs)in irradiated nuclear fuels drives mechanical interactions with the surrounding fuel skeleton.To investigate the micromechanical stress fields in irradiated nuclear fuels containing pressurized FGBs,a mechanical constitutive model for the equivalent solid of FGBs was developed and validated.This model was based on the modified Van der Waals equation,incorporating the effects of surface tension.Using this model,the micromechanical fields in irradiated U-10Mo fuels with randomly distributed FGBs were calculated during uniaxial tensile testing via the finite element(FE)method.The macroscopic elastic constants of the irradiated U-10Mo fuels were then derived using homogenization theory,and the influences of bubble pressure,bubble size,and porosity on these constants were examined.Results show that adjacent FGBs exhibit mechanical interactions,which leads to distinct stress concentrations in the surrounding fuel skeleton.The macroscopic elastic constants of irradiated U-10Mo fuels decrease with increasing the macroscopic porosity,which can be quantitatively described by the Mori-Tanaka model.In contrast,bubble pressure and size have negligible effects on these constants.
基金Project(JCKY2023205B003)supported by the Defense Industrial Technology Development Program,China。
文摘The creep deformation and mechanical properties of 2219 aluminum alloy were experimentally investigated under both tension and compression at the temperature of 165℃for different time.The results indicated that the creep deformation under tensile stress was greater than that under compressive stress.As the stress level increases,the compressive creep rate showed more significant increase.The yield strength after compressive stress creep-ageing was higher than that after stress-free ageing,with the lowest strength observed in the tensile-aged sample.Overall,the average phase length after compressive stress creep-ageing was larger than after tensile stress ageing.Under tensile stress,the number and size of precipitates at small angles to the stress direction were larger than those perpendicular to the stress direction.In contrast,under compressive stress,this relationship was reversed,and the preferential orientation of phases became more pronounced with ageing time.A unified,physics-based creep-ageing constitutive model,accounting for the orientation of precipitation,was developed for both tensile and compressive stress conditions.The predicted results were in good agreement with the experimental data.These findings,along with the developed model,provide a theoretical and simulation basis for precise creep-ageing forming of components under complex stresses.
基金Project(IMRI23005)supported by Ordos Science and Technology Bureau,ChinaProjects(52174096,52304110)supported by the National Natural Science Foundation of China。
文摘To investigate the effects of water and cyclic loading on dolomite’s mechanical properties during deep mining,mechanical experiments on non-pressure water absorption and cyclic loading were conducted.The findings reveal that the elastic modulus and Poisson ratio of dolomite fluctuate with increasing water content.The mass of water absorption is positively correlated with time and the water absorption stage can be divided into three stages:accelerated,decelerated,and stabilized stages.During this process,the number of pores in dolomite increases,while the pore diameter initially decreases and then fluctuates.Microscopic analysis shows that the proportion of mesopores first increases and then decreases,while micropores exhibit the opposite trend,and the proportion of macropores fluctuates around 0%.A model diagram of structural evolution during water absorption has been developed.Additionally,the softening process of dolomite’s water absorption strength is categorized into three stages:a relatively stable stage,an accelerated softening stage dominated by mesopore water absorption,and a decelerated softening stage characterized by micropore water absorption.A uniaxial damage constitutive model for dolomite under water influence was established based on the Weibull distribution and Mohr-Coulomb strength criterion,and experimental validation indicates its strong applicability.
基金supported by Shandong Provincial Colleges and Universities Youth Innovation Technol ogy Support Program(No.2023KJ092)Natural Science Foundation of Shandong Province(No.ZR2024ME060)Key Laboratory of Geological Safety of Coastal Urban Underground Space,Ministry of Natural Resources(No.BHKF2024Z06)。
文摘Prolonged cyclic water intrusion has progressively developed joints in the hydro-fluctuation belt,elevating the instability risk of reservoir bank slopes.To investigate its impact on joint shear damage evolution,joint samples were prepared using three representative roughness curves and subjected to direct shear testing following cyclic water intrusion.A shear damage constitutive model considering the coupling effect of cyclic water intrusion and load was developed based on macroscopic phenomenological damage mechanics and micro-statistical theory.Results indicate:(1)All critical shear mechanical parameters(including peak shear strength,shear stiffness,basic friction angle,and joint compressive strength)exhibit progressive deterioration with increasing water intrusion cycles;(2)Model validation through experimental curve comparisons confirms its reliability.The model demonstrates that intensified water intrusion cycles reduce key mechanical indices,inducing a brittle-to-ductile transition in joint surface deformation—a behavior consistent with experimental observations;(3)Damage under cyclic water intrusion and load coupling follows an S-shaped trend,divided into stabilization(water-dominated stage),development(load-dominated stage),and completion stages.The research provides valuable insights for stability studies,such as similar model experiments for reservoir bank slopes and other water-related projects.
基金co-supported by the financial support from the Fundamental Research Funds for the Central Universities,China(Nos.YWF-23-L-1012,YWF-22-L-1017)the National Natural Science Foundation of China(No.52005020)。
文摘The performance of welded Ni-based superalloys at high temperatures is essential to be evaluated due to their particular service environment for aero-engines and high-speed aircrafts.The tensile properties and related microstructural evolutions such as the carbide precipitate and grain of a laser-welded Ni-based alloy were experimentally and numerically investigated at different temperatures(20,300,500,800℃).The results show that at room temperature,the strength of the Base Material(BM)was slightly smaller,with a difference of less than 1%,than the Welded Material(WM),which can be attributed to the more uniformly distributed needle-shaped carbide precipitates in the WM than those nonuniformly coarser spherical ones in the BM.While at 300℃ and 500℃,the strength of WM decreased more obviously compared with that of BM due to the more apparent growth of grain:13.52%loss in yield strength in WM alloys as compared with BM alloys at 300℃,and 16.57% at 500℃.At 800℃,the strength of BM and WM both decreased to a similar level due to Dynamic Recrystallization(DRX).However,a much higher elongation was observed for the BM than WM(less than 50%of BM),which can be attributed to the enhanced dislocation accumulation capability of the large spherical carbides along grain boundaries on the fracture surface in BM.Furthermore,a unified model considering the welding effects on both microstructures(dislocation,carbides,and grain)and mechanical properties evolutions at different temperatures was developed and validated.Based on this model,the key temperature ranges(20–600℃)where apparent weakening of strength and uniform plasticity occurs for welded structures were identified,providing a direct guidance for potential structure and process design.
基金supported by the National Natural Science Foundation of China(NSFC)Excellent Research Group Program for“Multiscale Problems in Nonlinear Mechanics”(Grant No.12588201)。
文摘The inelastic behavior of thermoplastic polymers may involve shearing and crazing,and both depend on temperature and strain rate.Traditional constitutive models account for temperature and strain rate through phenomenological or empirical formulas.In this study,we present a physics-guided machine learning(ML)framework to model shear and craze in polymeric materials.The effects of all three principal stresses for the craze initiation are considered other than the maximum tensile principal stress solely in previous works.We implemented a finite element framework through a user-defined material subroutine and applied the constitutive model to the deformation in three polymers(PLA 4060D,PLA 3051D,and HIPS).The result shows that our ML-based model can predict the stress-strain and volume-strain responses at different strain rates with high accuracy.Notably,the ML-based approach needs no assumptions about yield criteria or hardening laws.This work highlights the potential of hybrid physics-ML paradigms to overcome the trade-offs between model complexity and accuracy in polymer mechanics,paving the way for computationally efficient and generalizable constitutive models for thermoplastic materials.
基金supported by the Opening Fund of Key Laboratory of Geological Survey and Evaluation of Ministry of Education(No.GLAB 2024ZR03)the National Natural Science Foundation of China(No.42407248)+2 种基金the Guizhou Provincial Basic Research Program(Natural Science)(No.QKHJC-[2023]-YB066)the Key Laboratory of Smart Earth(No.KF2023YB04-02)the Fundamental Research Funds for the Central Universities。
文摘The constitutive model is essential for predicting the deformation and stability of rocksoil mass.The estimation of constitutive model parameters is a necessary and important task for the reliable characterization of mechanical behaviors.However,constitutive model parameters cannot be evaluated accurately with a limited amount of test data,resulting in uncertainty in the prediction of stress-strain curves.This paper proposes a Bayesian analysis framework to address this issue.It combines the Bayesian updating with the structural reliability and adaptive conditional sampling methods to assess the equation parameter of constitutive models.Based on the triaxial and ring shear tests on shear zone soils from the Huangtupo landslide,a statistical damage constitutive model and a critical state hypoplastic constitutive model were used to demonstrate the effectiveness of the proposed framework.Moreover,the parameter uncertainty effects of the damage constitutive model on landslide stability were investigated.Results show that reasonable assessments of the constitutive model parameter can be well realized.The variability of stress-strain curves is strongly related to the model prediction performance.The estimation uncertainty of constitutive model parameters should not be ignored for the landslide stability calculation.Our study provides a reference for uncertainty analysis and parameter assessment of the constitutive model.
基金supported by the Qingdao Postdoctoral Science Foundation(No.862205040054)the International Research Fellowship from the Japan Society for the Promotion of Science(Postdoctoral Fellowships for Research in Japan(Standard))the National Natural Science Foundation of China(No.52078093).
文摘The mechanical properties of bedding rock in cold regions are frequently affected by freeze-thaw(F-T)cycles and ani-sotropy.Research on the mechanical characteristics of rock damage under the combined action of F-T and bedding angles is limited,and most traditional rock damage models cannot accurately capture these characteristics.We performed axial compression tests to ex-plore the strength characteristics of bedding slates at the bedding angles ofβ=0°,30°,45°,60°,and 90°under various F-T cycles.The experimental findings suggest that the elastic modulus and uniaxial compressive strength of the slate declined exponentially as the number of F-T cycles increased.Axial compressive strength was characterized by a U-shaped tendency with the bedding angle.This study proposes a damage model for the uniaxial compressive strength of transversely isotropic rock,which integrates the F-T effect,utilizing the enhanced anisotropic Hoek-Brown strength criterion and a statistical damage model.This model was validated using experimental data.This statistical damage model can precisely capture the dual attributes of rock mass strength reduction with F-T cy-cles and variations arising from the loading direction.
基金co-supported by Basic and Applied Basic Research Foundation of Guangdong Province(No.2022A1515110622)Natural Science Basic Research Program of Shaanxi Province(No.2023-JC-QN-0548)+1 种基金National Key R&D Program of China(No.2022YFB3402200)the Fundamental Research Funds for the Central Universities。
文摘This study presents new methods to effectively model the anisotropic yielding and hardening behavior of laser powder bed fusion fabricated aluminum alloy under both monotonic and cyclic loading conditions.The proposed model combines the yield surface-interpolation method to accurately describe the anisotropic hardening rates in various directions,with the Chaboche kinematic hardening rule to precisely reflect the cyclic characteristics.For numerical implementation of the combined anisotropic and cyclic constitutive model,a fully implicit stress integration algorithm based on return mapping method is provided.Moreover,the multiple parameters associated with the model are categorized and identified in an uncoupled manner.The isotropic and cyclic hardening parameters are determined by an inverse method,and the stability of the optimization outcomes is validated by applying different starting points for the parameters.Particularly,the back-stress effect on the identification of anisotropic parameters associated with the stress invariant-based Hill48 yield function is considered for the first time.This consideration leads to an improved prediction accuracy compared to the identification of anisotropic parameters without considering back-stress effect.The combined anisotropic and cyclic constitutive model,along with the calibrated parameters,are proven capable of accurately reproducing the intricate deformation behavior of laser powder bed fusion fabricated AlSi10Mg.
基金supported by the National Science Fund for Distinguished Young Scholars(52225403)the National Natural Science Foundation of China(42077244).
文摘The study of the mechanical property and damage state of coal materials under compression is a fundamental area of research in underground mining engineering.Drawing upon the compaction effect and linear energy dissipation(LED)law,a novel compressive damage constitutive model for brittle coal is proposed.Utilizing the energy-defined damage method for mate-rials,the LED law is innovatively introduced to accurately characterize the energy dissipation during the loading process,and a novel formula for characterizing the damage variable of brittle coal is proposed.On this basis,considering that the constitutive model based on the hypothesis of strain equivalence is incapable of accurately describing the compaction effect exhibited by coal material during the compression process,a correction coefficient is proposed and apply it in the novel damage constitutive model.The established conventional monotone loading and single-cyclic loading-unloading uniaxial compression damage constitutive models have been validated using experimental data from cylindrical and cuboid coal specimens.In addition,compared with the constitutive model obtained via the traditional energy calculation method based on the hypothesis that the unloading curve is a straight line,the constitutive model employing LED law can describe the stress-strain state of brittle coal more precisely.This approach introduces a new perspective and enhances the convenience for constructing the constitutive model based on energy theory.
