The hole reaming and side cutting characteristics of offset one-cone bit and conventional one- cone bit were investigated on simulated drilling experimental equipment. The borehole diameter was a little larger than th...The hole reaming and side cutting characteristics of offset one-cone bit and conventional one- cone bit were investigated on simulated drilling experimental equipment. The borehole diameter was a little larger than the bit diameter due to side force. However, the reaming effect was not very apparent, whether drilling with an offset or conventional one-cone bit. The side cutting displacement increased gradually with increasing depth of drilling and side force. The side cutting displacement of offset onecone bits was larger than that of conventional ones under the same conditions of weight-on-bit （WOB）, rotary speed, side force and borehole depth.展开更多
An experimental study of rock-breaking with an offset single cone bit was completed on the bit bench test equipment. Data such as transmission ratio, weight on bit （WOB）, rate of penetration （ROP） and torque on bi...An experimental study of rock-breaking with an offset single cone bit was completed on the bit bench test equipment. Data such as transmission ratio, weight on bit （WOB）, rate of penetration （ROP） and torque on bit were acquired in the experiments. Based on analyzing the experimental results, several conclusions were drawn as follows. The transmission ratio of the offset single-cone bit changed slightly with rotary speed of bit, weight on bit and offset distance. The rate of penetration of the offset singlecone bit increased with increase of WOB and off＇set distance. The torque on bit increased with increase of offset distance under the same WOB and bit rotary speed, decreased with increase of bit rotary speed under the same WOB. The rock-breaking mechanism of the offset single-cone bit was a scraping action. This indicates that the offset single-cone bit is a chipping type bit.展开更多
Bearings are key components of cone bit,thus its rapid failure is a major cause of leading to lower life of the bit.To improve the bearing performance and prolong working life,contact mechanics of hollow cylindrical r...Bearings are key components of cone bit,thus its rapid failure is a major cause of leading to lower life of the bit.To improve the bearing performance and prolong working life,contact mechanics of hollow cylindrical roller bearing of cone bit was simulated.Effects of hollow size,drilling pressure,friction coefficient and fitting clearance on mechanics performance of the bearing were studied.The results show that the maximum equivalent stress of the hollow cylindrical roller bearing appears on the claw journal,and the maximum contact stress appears on the contact pair of the hollow roller.Besides,hollow sizes have a greater impact on the equivalent stress and contact stress of the cylindrical roller,while the influence on the stress of the cone and claw journal is relatively small.With the increasing of the drilling pressure and fitting clearance,equivalent stress and contact stress of bearing parts increase.The friction coefficient has little impact on mechanical performance of the bearing.As the 121/4SWPI517 type hollow cylindrical roller bearing of cone bit an example,the optimal hollow size is 55%,the drilling pressure is 140 kN and the fitting clearance is 0e0.02 mm.展开更多
In this paper,we start to study the gradient flow of the functional L_(β) introduced by Han-Li-Sun in[8].As a first step,we show that if the initial surface is symplectic in a Kähler surface,then the symplectic ...In this paper,we start to study the gradient flow of the functional L_(β) introduced by Han-Li-Sun in[8].As a first step,we show that if the initial surface is symplectic in a Kähler surface,then the symplectic property is preserved along the gradient flow.Then we show that the singularity of the flow is characterized by the maximal norm of the second fundamental form.When β=1,we derive a monotonicity formula for the flow.As applications,we show that the l-tangent cone of the flow consists of the finite flat planes.展开更多
If there exists a null gradient field in 3 + 1 dimensional space-time, we can set up a kind of light-cone coordinate system in the space-time. In such coordinate system, the metric takes a simple form, which is helpfu...If there exists a null gradient field in 3 + 1 dimensional space-time, we can set up a kind of light-cone coordinate system in the space-time. In such coordinate system, the metric takes a simple form, which is helpful for simplifying and solving the Einstein’s field equation. This light-cone coordinate system has wonderful properties and has been used widely in astrophysics to calculate parameters. We discuss the structure of space-time with light-cone coordinate system in detail. We show how to construct the light-cone coordinate system and obtain the conditions of its existence, and then explain their geometrical and physical meanings.展开更多
文摘The hole reaming and side cutting characteristics of offset one-cone bit and conventional one- cone bit were investigated on simulated drilling experimental equipment. The borehole diameter was a little larger than the bit diameter due to side force. However, the reaming effect was not very apparent, whether drilling with an offset or conventional one-cone bit. The side cutting displacement increased gradually with increasing depth of drilling and side force. The side cutting displacement of offset onecone bits was larger than that of conventional ones under the same conditions of weight-on-bit （WOB）, rotary speed, side force and borehole depth.
文摘An experimental study of rock-breaking with an offset single cone bit was completed on the bit bench test equipment. Data such as transmission ratio, weight on bit （WOB）, rate of penetration （ROP） and torque on bit were acquired in the experiments. Based on analyzing the experimental results, several conclusions were drawn as follows. The transmission ratio of the offset single-cone bit changed slightly with rotary speed of bit, weight on bit and offset distance. The rate of penetration of the offset singlecone bit increased with increase of WOB and off＇set distance. The torque on bit increased with increase of offset distance under the same WOB and bit rotary speed, decreased with increase of bit rotary speed under the same WOB. The rock-breaking mechanism of the offset single-cone bit was a scraping action. This indicates that the offset single-cone bit is a chipping type bit.
基金The authors gratefully acknowledge finance of this study that was supported by Science and Technology Innovation Talent Engineering Project of Sichuan Province(2014-025)Natural Science Foundation of China(51474180).
文摘Bearings are key components of cone bit,thus its rapid failure is a major cause of leading to lower life of the bit.To improve the bearing performance and prolong working life,contact mechanics of hollow cylindrical roller bearing of cone bit was simulated.Effects of hollow size,drilling pressure,friction coefficient and fitting clearance on mechanics performance of the bearing were studied.The results show that the maximum equivalent stress of the hollow cylindrical roller bearing appears on the claw journal,and the maximum contact stress appears on the contact pair of the hollow roller.Besides,hollow sizes have a greater impact on the equivalent stress and contact stress of the cylindrical roller,while the influence on the stress of the cone and claw journal is relatively small.With the increasing of the drilling pressure and fitting clearance,equivalent stress and contact stress of bearing parts increase.The friction coefficient has little impact on mechanical performance of the bearing.As the 121/4SWPI517 type hollow cylindrical roller bearing of cone bit an example,the optimal hollow size is 55%,the drilling pressure is 140 kN and the fitting clearance is 0e0.02 mm.
基金supported by theNationalNatural Science Foundation of China,Nos.11721101,12071352,12031017。
文摘In this paper,we start to study the gradient flow of the functional L_(β) introduced by Han-Li-Sun in[8].As a first step,we show that if the initial surface is symplectic in a Kähler surface,then the symplectic property is preserved along the gradient flow.Then we show that the singularity of the flow is characterized by the maximal norm of the second fundamental form.When β=1,we derive a monotonicity formula for the flow.As applications,we show that the l-tangent cone of the flow consists of the finite flat planes.
文摘If there exists a null gradient field in 3 + 1 dimensional space-time, we can set up a kind of light-cone coordinate system in the space-time. In such coordinate system, the metric takes a simple form, which is helpful for simplifying and solving the Einstein’s field equation. This light-cone coordinate system has wonderful properties and has been used widely in astrophysics to calculate parameters. We discuss the structure of space-time with light-cone coordinate system in detail. We show how to construct the light-cone coordinate system and obtain the conditions of its existence, and then explain their geometrical and physical meanings.
