We fabricate flexible conductive and transparent graphene films on position-emission-tomography substrates and prepare large area graphene films by graphite oxide sheets with the new technical process. The multi-layer...We fabricate flexible conductive and transparent graphene films on position-emission-tomography substrates and prepare large area graphene films by graphite oxide sheets with the new technical process. The multi-layer graphene oxide sheets can be chemically reduced by HNO3 and HI to form a highly conductive graphene film on a substrate at lower temperature. The reduced graphene oxide sheets show a high conductivity sheet with resistance of 476Ω/sq and transmittance of 76% at 550nm （6 layers）. The technique used to produce the transparent conductive graphene thin film is facile, inexpensive, and can be tunable for a large area production applied for electronics or touch screens.展开更多
The deformation behavior and the contact area of conductive particles in anisotropically conductive adhesives (ACA) were investigated by finite element method (FEM). The solid conductive particles are made of pure Ni ...The deformation behavior and the contact area of conductive particles in anisotropically conductive adhesives (ACA) were investigated by finite element method (FEM). The solid conductive particles are made of pure Ni and Cu. The results indicate that the deformation of the conductive particles is inhomogeneous during fabrication. When the reduction in height is small the deformation concentrates in the area near the contact area. As the reduction in height increases, the strain in the area near the contact area increases, and the metal flows toward the circumference, resulting in the increase of the contact area between the conductive particles and pad. The higher the degree of deformation, the larger the contact area. The regression equations were offered to express the relations between the bounding force and the contact area or the reduction in height. An approach of how to obtain the maximum contact area in ACA was discussed.展开更多
The research and development of high-level radioactive waste(HLW)repository is a long-term systematic engineering project.Normally,it involves such stages as foundation study,site selection and assessment,underground ...The research and development of high-level radioactive waste(HLW)repository is a long-term systematic engineering project.Normally,it involves such stages as foundation study,site selection and assessment,underground research laboratory testing, and the design,construction,operation,and close of the repository.The key issue in repository design展开更多
Drip irrigation can produce high rice yields with significant water savings;therefore,it is widely used in arid area water-scarce northern China.However,high-frequency irrigation of drip irrigation with low temperatur...Drip irrigation can produce high rice yields with significant water savings;therefore,it is widely used in arid area water-scarce northern China.However,high-frequency irrigation of drip irrigation with low temperature well water leads to low root zone temperature and significantly reduce the rice yield compared to normal temperature water irrigated rice,for example,reservoir water.The main purpose of this paper is to investigate the effects of low soil temperature on the yield reduction of drip irrigated rice in the spike differentiation stage.The experiment set the soil temperatures at 18℃,24℃and 30℃under two irrigation methods(flood and drip irrigation),respectively.The results showed that,at the 30℃soil temperature,drip irrigation increased total root length by 53%but reduced root water conductivity by 9%compared with flood irrigation.Drip irrigation also increased leaf abscisic acid and proline concentrations by 13%and 5%,respectively.These results indicated that drip irrigated rice was under mild water stress.In the 18℃soil temperature,drip irrigation reduced hydraulic conductivity by 58%,leaf water potential by 40%and leaf net photosynthesis by 25%compared with flood irrigation.The starch concentration in male gametes was also 30%less in the drip irrigation treatment than in the flood irrigation treatment at soil temperature 18℃.Therefore,the main reason for the yield reduction of drip irrigated rice was that the low temperature aggravates the physiological drought of rice and leads to the decrease of starch content in male gametes and low pollination fertilization rate.Low temperature aggravates physiological water deficit in drip irrigated rice and leads to lower starch content in male gametes and low pollination fertilization rate,which is the main reason for the reduced yield of drip irrigated rice.Overall,the results indicated that the low soil temperatures aggravated the water stress that rice was under in the drip irrigated environment,causing declines both in the starch content of male gametes and in pollination rate.Low temperature will ultimately affect the rice yield under drip irrigation.展开更多
Porous titanium is produced by thepowder metallurgy method. Dependence of the electrical conductivity on the porosity and pore size is investigated and the experimental results are compared with a number of models. It...Porous titanium is produced by thepowder metallurgy method. Dependence of the electrical conductivity on the porosity and pore size is investigated and the experimental results are compared with a number of models. It is found that the minimum solid area model could be successfully applied to describe the relationship between the electrical conductivity and the porosity of porous titanium. This kind of conductivity increases with increasing pore sizes.展开更多
基金Supported by the Basic Research Program of Nanjing University of Posts and Telecommunications under Grant No NY212002the Innovative Research Team in University under Grant No IRT1148the 2014 Shuangchuang Program of Jiangsu Province
文摘We fabricate flexible conductive and transparent graphene films on position-emission-tomography substrates and prepare large area graphene films by graphite oxide sheets with the new technical process. The multi-layer graphene oxide sheets can be chemically reduced by HNO3 and HI to form a highly conductive graphene film on a substrate at lower temperature. The reduced graphene oxide sheets show a high conductivity sheet with resistance of 476Ω/sq and transmittance of 76% at 550nm （6 layers）. The technique used to produce the transparent conductive graphene thin film is facile, inexpensive, and can be tunable for a large area production applied for electronics or touch screens.
文摘The deformation behavior and the contact area of conductive particles in anisotropically conductive adhesives (ACA) were investigated by finite element method (FEM). The solid conductive particles are made of pure Ni and Cu. The results indicate that the deformation of the conductive particles is inhomogeneous during fabrication. When the reduction in height is small the deformation concentrates in the area near the contact area. As the reduction in height increases, the strain in the area near the contact area increases, and the metal flows toward the circumference, resulting in the increase of the contact area between the conductive particles and pad. The higher the degree of deformation, the larger the contact area. The regression equations were offered to express the relations between the bounding force and the contact area or the reduction in height. An approach of how to obtain the maximum contact area in ACA was discussed.
文摘The research and development of high-level radioactive waste(HLW)repository is a long-term systematic engineering project.Normally,it involves such stages as foundation study,site selection and assessment,underground research laboratory testing, and the design,construction,operation,and close of the repository.The key issue in repository design
基金supported by the National High Technology Research and Development Program of China(2011AA100508)the National Natural Science Foundation of China(31471947,31860587)
文摘Drip irrigation can produce high rice yields with significant water savings;therefore,it is widely used in arid area water-scarce northern China.However,high-frequency irrigation of drip irrigation with low temperature well water leads to low root zone temperature and significantly reduce the rice yield compared to normal temperature water irrigated rice,for example,reservoir water.The main purpose of this paper is to investigate the effects of low soil temperature on the yield reduction of drip irrigated rice in the spike differentiation stage.The experiment set the soil temperatures at 18℃,24℃and 30℃under two irrigation methods(flood and drip irrigation),respectively.The results showed that,at the 30℃soil temperature,drip irrigation increased total root length by 53%but reduced root water conductivity by 9%compared with flood irrigation.Drip irrigation also increased leaf abscisic acid and proline concentrations by 13%and 5%,respectively.These results indicated that drip irrigated rice was under mild water stress.In the 18℃soil temperature,drip irrigation reduced hydraulic conductivity by 58%,leaf water potential by 40%and leaf net photosynthesis by 25%compared with flood irrigation.The starch concentration in male gametes was also 30%less in the drip irrigation treatment than in the flood irrigation treatment at soil temperature 18℃.Therefore,the main reason for the yield reduction of drip irrigated rice was that the low temperature aggravates the physiological drought of rice and leads to the decrease of starch content in male gametes and low pollination fertilization rate.Low temperature aggravates physiological water deficit in drip irrigated rice and leads to lower starch content in male gametes and low pollination fertilization rate,which is the main reason for the reduced yield of drip irrigated rice.Overall,the results indicated that the low soil temperatures aggravated the water stress that rice was under in the drip irrigated environment,causing declines both in the starch content of male gametes and in pollination rate.Low temperature will ultimately affect the rice yield under drip irrigation.
基金Supported by the National Natural Science Foundation of China under Grant No 10374089, and the Knowledge Innovation Program of Chinese Academy of Sciences under Grant No KJCX2-SW-W17.
文摘Porous titanium is produced by thepowder metallurgy method. Dependence of the electrical conductivity on the porosity and pore size is investigated and the experimental results are compared with a number of models. It is found that the minimum solid area model could be successfully applied to describe the relationship between the electrical conductivity and the porosity of porous titanium. This kind of conductivity increases with increasing pore sizes.
