In this study,a dynamic model for the bearing rotor system of a high-speed train under variable speed conditions is established.In contrast to previous studies,the contact stress is simplifed in the proposed model and...In this study,a dynamic model for the bearing rotor system of a high-speed train under variable speed conditions is established.In contrast to previous studies,the contact stress is simplifed in the proposed model and the compensation balance excitation caused by the rotor mass eccentricity considered.The angle iteration method is used to overcome the challenge posed by the inability to determine the roller space position during bearing rotation.The simulation results show that the model accurately describes the dynamics of bearings under varying speed profles that contain acceleration,deceleration,and speed oscillation stages.The order ratio spectrum of the bearing vibration signal indicates that both the single and multiple frequencies in the simulation results are consistent with the theoretical results.Experiments on bearings with outer and inner ring faults under various operating conditions are performed to verify the developed model.展开更多
The axial piston pump usually works under variable speed conditions.It is important to evaluate the health status of the axial piston pump under the variable speed condition.Aiming at the characteristic signals obtain...The axial piston pump usually works under variable speed conditions.It is important to evaluate the health status of the axial piston pump under the variable speed condition.Aiming at the characteristic signals obtained under different wear levels of the port plate,a feature signal extraction method under variable speed conditions is proposed.Firstly,the combination of complete ensemble empirical mode decomposition with adaptive noise(CEEMDAN)energy spectrum and fast spectral kurtosis principle is used to accurately extract the intrinsic mode function(IMF)component containing the sensitive information of the degraded feature.Then,the aspect ratio analysis method of the angle domain variational mode decomposition(VMD)is used to process the feature index containing the sensitive information of the degraded feature.In order to evaluate the health status of the axial piston pump under variable speed,the vibration reliability analysis method for axial piston pump based on Weibull proportional failure rate model is proposed.The experimental results show that the proposed method can accurately evaluate the health status of the axial piston pump.展开更多
During a high-speed train operation,the train speed changes frequently,resulting in motion change as a function of time.A dynamic model of a double‐row tapered roller bearing system of a high-speed train under variab...During a high-speed train operation,the train speed changes frequently,resulting in motion change as a function of time.A dynamic model of a double‐row tapered roller bearing system of a high-speed train under variable speed conditions is developed.The model takes into consideration the structural characteristics of one outer ring and two inner rings of the train bearing.The angle iteration method is used to determine the rotation angle of the roller within any time period,solving the difficult problem of determining the location of the roller.The outer ring and inner ring faults are captured by the model,and the model response is obtained under variable speed conditions.Experiments are carried out under two fault conditions to validate the model results.The simulation results are found to be in good agreement with the results of the formula,and the errors between the simulation results and the experimental results when the bearing has outer and inner ring faults are found to be,respectively,5.97% and 2.59%,which demonstrates the effectiveness of the model.The influence of outer ring and inner ring faults on system stability is analyzed quantitatively using the Lempel–Ziv complexity.The results show that for low train acceleration,the inner ring fault has a more significant effect on the system stability,while for high acceleration,the outer ring fault has a more significant effect.However,when the train acceleration changes,the outer ring has a greater influence.In practice,train acceleration is usually small and does not frequently change in one operation cycle.Therefore,the inner ring fault of the bearing deserves more attention.展开更多
Speed humps are the most common type of traffic calming devices due to their low cost and easy installation. However, in many Egyptian roads, considerable number of these humps is randomly placed without proper engine...Speed humps are the most common type of traffic calming devices due to their low cost and easy installation. However, in many Egyptian roads, considerable number of these humps is randomly placed without proper engineering studies and justifications. Deteri- oration of pavement condition is observed near these humps. This paper presents a case study applied to collect and analyze visual inspection data for the reason of evaluating the impact of speed humps on pavement condition on intercity rural roads. The paper used 52 speed humps located in an intercity two-lane, two-way road that connects two cities, Tahta and Gerga, in Upper Egypt. The total length of this road is about 34 km. Pavement condition index （PCI）, in road sections, near speed humps in the two directions of travel were calculated from the visual inspection measurements. The characteristics of each speed hump （width, height, and distance from preceding hump） were measured. Using statistical analyses, the correlations between the pavement conditions and hump char- acteristics were examined. Regression analysis models were developed to represent the relationships between pavement conditions and hump characteristics. Generally, the re- sults proved that the pavement conditions are greatly influenced by the presence of speed humps and hump characteristics.展开更多
基金Supported by National Natural Science Foundation of China(Grant Nos.11790282,12032017,11802184,11902205,12002221,11872256)S&T Program of Hebei(Grant No.20310803D)+2 种基金Natural Science Foundation of Hebei Province(Grant No.A2020210028)Postgraduates Innovation Foundation of Hebei Province(Grant No.CXZZBS2019154)State Foundation for Studying Abroad.
文摘In this study,a dynamic model for the bearing rotor system of a high-speed train under variable speed conditions is established.In contrast to previous studies,the contact stress is simplifed in the proposed model and the compensation balance excitation caused by the rotor mass eccentricity considered.The angle iteration method is used to overcome the challenge posed by the inability to determine the roller space position during bearing rotation.The simulation results show that the model accurately describes the dynamics of bearings under varying speed profles that contain acceleration,deceleration,and speed oscillation stages.The order ratio spectrum of the bearing vibration signal indicates that both the single and multiple frequencies in the simulation results are consistent with the theoretical results.Experiments on bearings with outer and inner ring faults under various operating conditions are performed to verify the developed model.
基金Supported by the National Key Research and Development Program of China(No.2019YFB2005204)the National Natural Science Foundation of China(No.52075469,51675461,11673040)+1 种基金the Key Research and Development Program of Hebei Province(No.19273708D)the Open Foundation of the State Key Laboratory of Fluid Power and Mechatronic Systems(No.GZKF-201922).
文摘The axial piston pump usually works under variable speed conditions.It is important to evaluate the health status of the axial piston pump under the variable speed condition.Aiming at the characteristic signals obtained under different wear levels of the port plate,a feature signal extraction method under variable speed conditions is proposed.Firstly,the combination of complete ensemble empirical mode decomposition with adaptive noise(CEEMDAN)energy spectrum and fast spectral kurtosis principle is used to accurately extract the intrinsic mode function(IMF)component containing the sensitive information of the degraded feature.Then,the aspect ratio analysis method of the angle domain variational mode decomposition(VMD)is used to process the feature index containing the sensitive information of the degraded feature.In order to evaluate the health status of the axial piston pump under variable speed,the vibration reliability analysis method for axial piston pump based on Weibull proportional failure rate model is proposed.The experimental results show that the proposed method can accurately evaluate the health status of the axial piston pump.
基金The present work was supported by the National Natural Science Foundation of China (Nos.11790282,12032017,12002221,and 11872256)the National Key R&D Program (2020YFB2007700)+1 种基金the S&T Program of Hebei(20310803D)the Natural Science Foundation of Hebei Province (No.A2020210028).
文摘During a high-speed train operation,the train speed changes frequently,resulting in motion change as a function of time.A dynamic model of a double‐row tapered roller bearing system of a high-speed train under variable speed conditions is developed.The model takes into consideration the structural characteristics of one outer ring and two inner rings of the train bearing.The angle iteration method is used to determine the rotation angle of the roller within any time period,solving the difficult problem of determining the location of the roller.The outer ring and inner ring faults are captured by the model,and the model response is obtained under variable speed conditions.Experiments are carried out under two fault conditions to validate the model results.The simulation results are found to be in good agreement with the results of the formula,and the errors between the simulation results and the experimental results when the bearing has outer and inner ring faults are found to be,respectively,5.97% and 2.59%,which demonstrates the effectiveness of the model.The influence of outer ring and inner ring faults on system stability is analyzed quantitatively using the Lempel–Ziv complexity.The results show that for low train acceleration,the inner ring fault has a more significant effect on the system stability,while for high acceleration,the outer ring fault has a more significant effect.However,when the train acceleration changes,the outer ring has a greater influence.In practice,train acceleration is usually small and does not frequently change in one operation cycle.Therefore,the inner ring fault of the bearing deserves more attention.
文摘Speed humps are the most common type of traffic calming devices due to their low cost and easy installation. However, in many Egyptian roads, considerable number of these humps is randomly placed without proper engineering studies and justifications. Deteri- oration of pavement condition is observed near these humps. This paper presents a case study applied to collect and analyze visual inspection data for the reason of evaluating the impact of speed humps on pavement condition on intercity rural roads. The paper used 52 speed humps located in an intercity two-lane, two-way road that connects two cities, Tahta and Gerga, in Upper Egypt. The total length of this road is about 34 km. Pavement condition index （PCI）, in road sections, near speed humps in the two directions of travel were calculated from the visual inspection measurements. The characteristics of each speed hump （width, height, and distance from preceding hump） were measured. Using statistical analyses, the correlations between the pavement conditions and hump char- acteristics were examined. Regression analysis models were developed to represent the relationships between pavement conditions and hump characteristics. Generally, the re- sults proved that the pavement conditions are greatly influenced by the presence of speed humps and hump characteristics.
