With the increasing complexity of industrial automation,planetary gearboxes play a vital role in largescale equipment transmission systems,directly impacting operational efficiency and safety.Traditional maintenance s...With the increasing complexity of industrial automation,planetary gearboxes play a vital role in largescale equipment transmission systems,directly impacting operational efficiency and safety.Traditional maintenance strategies often struggle to accurately predict the degradation process of equipment,leading to excessive maintenance costs or potential failure risks.However,existing prediction methods based on statistical models are difficult to adapt to nonlinear degradation processes.To address these challenges,this study proposes a novel condition-based maintenance framework for planetary gearboxes.A comprehensive full-lifecycle degradation experiment was conducted to collect raw vibration signals,which were then processed using a temporal convolutional network autoencoder with multi-scale perception capability to extract deep temporal degradation features,enabling the collaborative extraction of longperiod meshing frequencies and short-term impact features from the vibration signals.Kernel principal component analysis was employed to fuse and normalize these features,enhancing the characterization of degradation progression.A nonlinear Wiener process was used to model the degradation trajectory,with a threshold decay function introduced to dynamically adjust maintenance strategies,and model parameters optimized through maximum likelihood estimation.Meanwhile,the maintenance strategy was optimized to minimize costs per unit time,determining the optimal maintenance timing and preventive maintenance threshold.The comprehensive indicator of degradation trends extracted by this method reaches 0.756,which is 41.2%higher than that of traditional time-domain features;the dynamic threshold strategy reduces the maintenance cost per unit time to 55.56,which is 8.9%better than that of the static threshold optimization.Experimental results demonstrate significant reductions in maintenance costs while enhancing system reliability and safety.This study realizes the organic integration of deep learning and reliability theory in the maintenance of planetary gearboxes,provides an interpretable solution for the predictive maintenance of complex mechanical systems,and promotes the development of condition-based maintenance strategies for planetary gearboxes.展开更多
To provide some feasible condition-based maintenance （CBM） decision making methods for civil aeroengine, firstly, the theory of aeroengine CBM decision making is described. The proportional intensity（PI） model is ...To provide some feasible condition-based maintenance （CBM） decision making methods for civil aeroengine, firstly, the theory of aeroengine CBM decision making is described. The proportional intensity（PI） model is established based on the reliability and condition monitoring data. According to the model, the decision making methods are proposed for the optimal preventive maintenance（PM） interval and removal. Then, the time on wing （TOW） is predicted by collecting actual data based on the engine age and operating conditions. Finally, an example of a fleet for CF6-80C2 engines is illustrated. It shows that sufficient engine operation data are the key of accurate decision making. Results indicate that the CBM decision making methods are helpful for engineers in airlines to control engine maintenance actions and TOW, thus decreasing risks and maintenance costs.展开更多
A condition-based maintenance model for gamma deteriorating system under continuous inspection is studied. This methodology uses a gamma distribution to model the material degradation, and the impact of imperfect main...A condition-based maintenance model for gamma deteriorating system under continuous inspection is studied. This methodology uses a gamma distribution to model the material degradation, and the impact of imperfect maintenance actions on the system reliability is investigated. The state of a degrading system immediately after the imperfect maintenance action is assumed as a random variable and the maintenance time follows a geometric process. Furthermore, the explicit expressions for the long-run average cost and availability per unit time of the system are evaluated, an optimal policy (ε^*) could be determined numeri- cally or analytically according to the optimization model. At last, a numerical example for a degrading system modeled by a gamma process is presented to demonstrate the use of this policy in practical applications.展开更多
Condition-based maintenance(CBM) is receiving increasing attention in various engineering systems because of its effectiveness. This paper formulates a new CBM optimization problem for continuously monitored degrading...Condition-based maintenance(CBM) is receiving increasing attention in various engineering systems because of its effectiveness. This paper formulates a new CBM optimization problem for continuously monitored degrading systems considering imperfect maintenance actions. In terms of maintenance actions,in practice, they scarcely restore the system to an as-good-as new state due to residual damage. According to up-to-data researches, imperfect maintenance actions are likely to speed up the degradation process. Regarding the developed CBM optimization strategy, it can balance the maintenance cost and the availability by the searching the optimal preventive maintenance threshold.The maximum number of maintenance is also considered, which is regarded as an availability constraint in the CBM optimization problem. A numerical example is introduced, and experimental results can demonstrate the novelty, feasibility and flexibility of the proposed CBM optimization strategy.展开更多
At present, condition monitoring and fault diagnosis technology and their application in engineering have been widely studied. Relatively little attention has been paid to condition-based maintenance decision-making f...At present, condition monitoring and fault diagnosis technology and their application in engineering have been widely studied. Relatively little attention has been paid to condition-based maintenance decision-making for equipment. In this paper,based on the decision-making policy in traditional condition-based maintenance,the connotation of condition-based maintenance for equipment was defined, and its characteristics were analyzed.Working contents of condition-based maintenance for equipment were provided,which were divided into three stages. The influence factors in condition-based maintenance for equipment were analyzed. The key links of equipment maintenance contents and decision-making process were proposed. The condition-based maintenance decision-making policy presented in this paper can provide a practical reference for equipment maintenance.展开更多
A proactive approach is constructed to cope with the integrated problem of batch production and maintenance in a deteriorating system. The condition of the system is modeled by a proportional hazards model(PHM) which ...A proactive approach is constructed to cope with the integrated problem of batch production and maintenance in a deteriorating system. The condition of the system is modeled by a proportional hazards model(PHM) which considers both system deterioration state and usage. The deterioration state of system is uncertain and is only observed between batches. An integration model for optimizing production plan and conditionbased maintenance(CBM) policy is proposed, in which the maintenance threshold and production quantity are proactively decided simultaneously. To obtain a robust solution with minimal cost over the planning horizon, a simulation-based iterative algorithm is developed to solve the complicated non-linear model. Numerical results show that the performance of the developed approach is satisfactory under uncertainty.展开更多
Most of the maintenance optimization models in condition-based maintenance(CBM) consider the cost-optimal criterion, but few papers have dealt with availability maximization for maintenance applications. A novel optim...Most of the maintenance optimization models in condition-based maintenance(CBM) consider the cost-optimal criterion, but few papers have dealt with availability maximization for maintenance applications. A novel optimal Bayesian control approach is presented for maintenance decision making. The system deterioration evolves as a three-state continuous time hidden semi-Markov process. Considering the optimal maintenance policy, the multivariate Bayesian control scheme based on the hidden semi-Markov model(HSMM) is developed, the objective is to maximize the long-run expected average availability per unit time. The proposed approach can optimize the sampling interval and control limit jointly. A case study using Markov chain Monte Carlo(MCMC)simulation is provided and a comparison with the Bayesian control scheme based on hidden Markov model(HMM), the age-based replacement policy, Hotelling’s T2, multivariate exponentially weihted moving average(MEWMA) and multivariate cumulative sum(MCUSUM) control charts is given, which illustrates the effectiveness of the proposed method.展开更多
Condition monitoring is increasingly used to anticipate and detect failures of industrial machines.Failures of machines can cause high maintenance or replacement costs.If neglected,it may result in catastrophic accide...Condition monitoring is increasingly used to anticipate and detect failures of industrial machines.Failures of machines can cause high maintenance or replacement costs.If neglected,it may result in catastrophic accidents leading to production shrinkage.The potential failure would negatively affect the profitability of the company,including production shut down,cost of spare parts,cost of labor,damage of reputation,risk of injury to people and the environment.In recent years,condition-based maintenance( CBM) and prognostic and health management( PHM) are developed and formed a strong connection among science,engineering,computer,reliability,communication,management,etc.Computerized maintenance management systems( CMMS) store a lot of data regarding the fault diagnosis and life prediction of the machinery equipment.It's too necessary to uncover useful knowledge from the huge amount of data.It's vital to find the ways to obtain useful and concise information from these data.This information can be of great influence in the decision making of managers.This article is a review of intelligent approaches in machinery faults diagnosis and prediction based on PHM and CBM.展开更多
With the further development of service-oriented,performance-based contracting(PBC)has been widely adopted in industry and manufacturing.However,maintenance optimization problems under PBC have not received enough att...With the further development of service-oriented,performance-based contracting(PBC)has been widely adopted in industry and manufacturing.However,maintenance optimization problems under PBC have not received enough attention.To further extend the scope of PBC’s application in the field of maintenance optimization,we investigate the condition-based maintenance(CBM)optimization for gamma deteriorating systems under PBC.Considering the repairable single-component system subject to the gamma degradation process,this paper proposes a CBM optimization model to maximize the profit and improve system performance at a relatively low cost under PBC.In the proposed CBM model,the first inspection interval has been considered in order to reduce the inspection frequency and the cost rate.Then,a particle swarm algorithm(PSO)and related solution procedure are presented to solve the multiple decision variables in our proposed model.In the end,a numerical example is provided so as to demonstrate the superiority of the presented model.By comparing the proposed policy with the conventional ones,the superiority of our proposed policy is proved,which can bring more profits to providers and improve performance.Sensitivity analysis is conducted in order to research the effect of corrective maintenance cost and time required for corrective maintenance on optimization policy.A comparative study is given to illustrate the necessity of distinguishing the first inspection interval or not.展开更多
In the process of power supply of power system, the development of primary equipment overhaul of substation is facing many challenges. Further analysis of the current status of power and electrical equipment maintenan...In the process of power supply of power system, the development of primary equipment overhaul of substation is facing many challenges. Further analysis of the current status of power and electrical equipment maintenance and repair, so as to formulate targeted improvement strategies, is the fundamental measure to comprehensively improve the level of power and electrical equipment maintenance and maintenance of normal operation of the equipment.展开更多
The existing maintenance strategies of offshore wind energy are reviewed including the specific aspects of condition-based maintenance, focusing on three primary phases, namely, condition monitoring, fault diagnosis a...The existing maintenance strategies of offshore wind energy are reviewed including the specific aspects of condition-based maintenance, focusing on three primary phases, namely, condition monitoring, fault diagnosis and prognosis, and maintenance optimization. Relevant academic research and industrial applications are identified and summarized. The state of art, capabilities,and constraints of condition-based maintenance are analyzed. The presented research demonstrates that the intelligent-based approach has become a promising solution for condition recognition, and an integrated data platform for offshore wind farms is significant to optimize the maintenance activities.展开更多
Overview about three key contents of condition-based maintenance decision-making of a multi-component system is analyzed based on maintenance optimization and modeling. The component deterioration model, the correlati...Overview about three key contents of condition-based maintenance decision-making of a multi-component system is analyzed based on maintenance optimization and modeling. The component deterioration model, the correlation between the degraded components and the system configuration are analyzed separately in the deterioration model of multi-component system.For the maintenance polices,the opportunistic maintenance( OM)policy and the grouping maintenance( GM) policy are analyzed and summarized in combination with the condition-based maintenance( CBM) modeling of multi-component system. It is put forward that CBM modeling of multi-component system should be further researched based on the inspection interval and the maintenance threshold of multi-component system in availability.展开更多
An effective maintenance policy optimization model can reduce maintenance cost and system operation risk. For mission-oriented systems, the degradation process changes dynamically and is monotonous and irreversible. M...An effective maintenance policy optimization model can reduce maintenance cost and system operation risk. For mission-oriented systems, the degradation process changes dynamically and is monotonous and irreversible. Meanwhile, the risk of early failure is high. Therefore, this paper proposes a dynamic condition-based maintenance(CBM) optimization model for mission-oriented system based on inverse Gaussian(IG) degradation process. Firstly, the IG process with random drift coefficient is used to describe the degradation process and the relevant probability distributions are obtained. Secondly, the dynamic preventive maintenance threshold(DPMT) function is used to control the early failure risk of the mission-oriented system, and the influence of imperfect preventive maintenance(PM)on the degradation amount and degradation rate is analysed comprehensively. Thirdly, according to the mission availability requirement, the probability formulas of different types of renewal policies are obtained, and the CBM optimization model is constructed. Finally, a numerical example is presented to verify the proposed model. The comparison with the fixed PM threshold model and the sensitivity analysis show the effectiveness and application value of the optimization model.展开更多
The evolution of maintenance management is briefly introduced in this paper, from corrective maintenance to preventive maintenance. First, a range of condition monitoring and fault diagnosis techniques developed in di...The evolution of maintenance management is briefly introduced in this paper, from corrective maintenance to preventive maintenance. First, a range of condition monitoring and fault diagnosis techniques developed in different industries are surveyed; Second, many methods of condition monitoring are presented; Third, mathematical methods used in condition monitoring are given; Then the merits and shortcomings are discussed. Efficient maintenance policies are of fundamental importance in system engineering because of their fallbacks into the safety and economics of plant operation. Applying condition-based maintenance to a system can reduce the cost and extend the availability of facilities. With the advent of personal computers as fast and cost effective machines for data acquisition and processing of multiple signals some shortcomings mentioned in condition monitoring could be solved or reduced to some extent. These PCs can be a solution as a condition monitoring based maintenance system.展开更多
The development process of high-voltage electric power equipment maintenance was introduced. It is pointed out that the trend of high-voltage electric power equipment maintenance is so called condition-based maintenan...The development process of high-voltage electric power equipment maintenance was introduced. It is pointed out that the trend of high-voltage electric power equipment maintenance is so called condition-based maintenance. With the development of computer technology and sensors, on-line monitoring of high-voltage electric power equipment has developed rapidly. By introducing the main principle of Schering bridge to measure tanδ, the way of on-line monitoring of high-voltage electric power equipment was explained. Difference methods of on-line monitoring of insulation parameters for 35 kV substation were discussed. Finally, the shortcomings as well as its tendency of on-line monitoring were analyzed.展开更多
To improve the operation and maintenance management level of large repairable components,such as electrical equipment,large nuclear power facilities,and high-speed electric multiple unit(EMU),and increase economic ben...To improve the operation and maintenance management level of large repairable components,such as electrical equipment,large nuclear power facilities,and high-speed electric multiple unit(EMU),and increase economic benefits,preventive maintenance has been widely used in industrial enterprises in recent years.Focusing on the problems of high maintenance costs and considerable failure hazards of EMU components in operation,we establish a state preventive maintenance model based on a stochastic differential equation.Firstly,a state degradation model of the repairable components is established in consideration of the degradation of the components and external random interference.Secondly,based on topology and martingale theory,the state degradation model is analyzed,and its simplex,stopping time,and martingale properties are proven.Finally,the monitoring data of the EMU components are taken as an example,analyzed and simulated to verify the effectiveness of the model.展开更多
Addressing the limitations of inadequate stochastic disturbance characterization during wind turbine degradation processes that result in constrained modeling accuracy,replacement-based maintenance practices that devi...Addressing the limitations of inadequate stochastic disturbance characterization during wind turbine degradation processes that result in constrained modeling accuracy,replacement-based maintenance practices that deviate from actual operational conditions,and static maintenance strategies that fail to adapt to accelerated deterioration trends leading to suboptimal remaining useful life utilization,this study proposes a Time-Based Incomplete Maintenance(TBIM)strategy incorporating reliability constraints through stochastic differential equations(SDE).By quantifying stochastic interference via Brownian motion terms and characterizing nonlinear degradation features through state influence rate functions,a high-precision SDE degradation model is constructed,achieving 16%residual reduction compared to conventional ordinary differential equation(ODE)methods.The introduction of age reduction factors and failure rate growth factors establishes an incomplete maintenance mechanism that transcends traditional“as-good-as-new”assumptions,with the TBIM model demonstrating an additional 8.5%residual reduction relative to baseline SDE approaches.A dynamic maintenance interval optimization model driven by dual parameters—preventive maintenance threshold R_(p) and replacement threshold R_(r)—is designed to achieve synergistic optimization of equipment reliability and maintenance economics.Experimental validation demonstrates that the optimized TBIM extends equipment lifespan by 4.4%and reducesmaintenance costs by 4.16%at R_(p)=0.80,while achieving 17.2%lifespan enhancement and 14.6%cost reduction at R_(p)=0.90.This methodology provides a solution for wind turbine preventive maintenance that integrates condition sensitivity with strategic foresight.展开更多
Condition-based maintenance(CBM)detects early signs of failure and dictates when maintenance should be performed based on the actual condition of a system.In this paper,we first review some of the recent research on C...Condition-based maintenance(CBM)detects early signs of failure and dictates when maintenance should be performed based on the actual condition of a system.In this paper,we first review some of the recent research on CBM under various physical structures and signal data.Then,we summarize several kinds of prognostic models that use monitoring information to estimate the reliability of complex systems or products.Monitoring information also facilitates operational decisions in production planning,spare parts management,reliability improvement,and prognostics and health management.Finally,we suggest some research opportunities for the reliability and operations management communities to fill the research gap between these two fields.展开更多
In view of the insufficient utilization of condition-monitoring information and the improper scheduling often observed in conventional maintenance strategies for photovoltaic(PV)modules,this study proposes a predictiv...In view of the insufficient utilization of condition-monitoring information and the improper scheduling often observed in conventional maintenance strategies for photovoltaic(PV)modules,this study proposes a predictive maintenance(PdM)strategy based on Remaining Useful Life(RUL)estimation.First,a RUL prediction model is established using the Transformer architecture,which enables the effective processing of sequential degradation data.By employing the historical degradation data of PV modules,the proposed model provides accurate forecasts of the remaining useful life,thereby supplying essential inputs for maintenance decision-making.Subsequently,the RUL information obtained from the prediction process is integrated into the optimization of maintenance policies.An opposition-based learning Harris Hawks Optimization(OHHO)algorithm is introduced to jointly optimize two critical parameters:the maintenance threshold L,which specifies the degradation level at which maintenance should be performed,and the recovery factor r,which reflects the extent to which the system performance is restored after maintenance.The objective of this joint optimization is to minimize the overall operation and maintenance cost while maintaining system availability.Finally,simulation experiments are conducted to evaluate the performance of the proposed PdM strategy.The results indicate that,compared with conventional corrective maintenance(CM)and periodic maintenance(PM)strategies,the RUL-driven PdM approach achieves a reduction in the average cost rate by approximately 20.7%and 17.9%,respectively,thereby demonstrating its potential effectiveness for practical PV maintenance applications.展开更多
基金funded by scientific research projects under Grant JY2024B011.
文摘With the increasing complexity of industrial automation,planetary gearboxes play a vital role in largescale equipment transmission systems,directly impacting operational efficiency and safety.Traditional maintenance strategies often struggle to accurately predict the degradation process of equipment,leading to excessive maintenance costs or potential failure risks.However,existing prediction methods based on statistical models are difficult to adapt to nonlinear degradation processes.To address these challenges,this study proposes a novel condition-based maintenance framework for planetary gearboxes.A comprehensive full-lifecycle degradation experiment was conducted to collect raw vibration signals,which were then processed using a temporal convolutional network autoencoder with multi-scale perception capability to extract deep temporal degradation features,enabling the collaborative extraction of longperiod meshing frequencies and short-term impact features from the vibration signals.Kernel principal component analysis was employed to fuse and normalize these features,enhancing the characterization of degradation progression.A nonlinear Wiener process was used to model the degradation trajectory,with a threshold decay function introduced to dynamically adjust maintenance strategies,and model parameters optimized through maximum likelihood estimation.Meanwhile,the maintenance strategy was optimized to minimize costs per unit time,determining the optimal maintenance timing and preventive maintenance threshold.The comprehensive indicator of degradation trends extracted by this method reaches 0.756,which is 41.2%higher than that of traditional time-domain features;the dynamic threshold strategy reduces the maintenance cost per unit time to 55.56,which is 8.9%better than that of the static threshold optimization.Experimental results demonstrate significant reductions in maintenance costs while enhancing system reliability and safety.This study realizes the organic integration of deep learning and reliability theory in the maintenance of planetary gearboxes,provides an interpretable solution for the predictive maintenance of complex mechanical systems,and promotes the development of condition-based maintenance strategies for planetary gearboxes.
基金the National Natural Science Foundation of China(60672164)the National High Technology Research and Development Program of China(863Program)(2006AA04Z427)~~
文摘To provide some feasible condition-based maintenance （CBM） decision making methods for civil aeroengine, firstly, the theory of aeroengine CBM decision making is described. The proportional intensity（PI） model is established based on the reliability and condition monitoring data. According to the model, the decision making methods are proposed for the optimal preventive maintenance（PM） interval and removal. Then, the time on wing （TOW） is predicted by collecting actual data based on the engine age and operating conditions. Finally, an example of a fleet for CF6-80C2 engines is illustrated. It shows that sufficient engine operation data are the key of accurate decision making. Results indicate that the CBM decision making methods are helpful for engineers in airlines to control engine maintenance actions and TOW, thus decreasing risks and maintenance costs.
基金supported by the National watural Science Foundation of China(60904002)
文摘A condition-based maintenance model for gamma deteriorating system under continuous inspection is studied. This methodology uses a gamma distribution to model the material degradation, and the impact of imperfect maintenance actions on the system reliability is investigated. The state of a degrading system immediately after the imperfect maintenance action is assumed as a random variable and the maintenance time follows a geometric process. Furthermore, the explicit expressions for the long-run average cost and availability per unit time of the system are evaluated, an optimal policy (ε^*) could be determined numeri- cally or analytically according to the optimization model. At last, a numerical example for a degrading system modeled by a gamma process is presented to demonstrate the use of this policy in practical applications.
基金supported by the National Natural Science Foundation of China(61873122)the Priority Academic Program Development of Jiangsu Higher Education Institutions。
文摘Condition-based maintenance(CBM) is receiving increasing attention in various engineering systems because of its effectiveness. This paper formulates a new CBM optimization problem for continuously monitored degrading systems considering imperfect maintenance actions. In terms of maintenance actions,in practice, they scarcely restore the system to an as-good-as new state due to residual damage. According to up-to-data researches, imperfect maintenance actions are likely to speed up the degradation process. Regarding the developed CBM optimization strategy, it can balance the maintenance cost and the availability by the searching the optimal preventive maintenance threshold.The maximum number of maintenance is also considered, which is regarded as an availability constraint in the CBM optimization problem. A numerical example is introduced, and experimental results can demonstrate the novelty, feasibility and flexibility of the proposed CBM optimization strategy.
文摘At present, condition monitoring and fault diagnosis technology and their application in engineering have been widely studied. Relatively little attention has been paid to condition-based maintenance decision-making for equipment. In this paper,based on the decision-making policy in traditional condition-based maintenance,the connotation of condition-based maintenance for equipment was defined, and its characteristics were analyzed.Working contents of condition-based maintenance for equipment were provided,which were divided into three stages. The influence factors in condition-based maintenance for equipment were analyzed. The key links of equipment maintenance contents and decision-making process were proposed. The condition-based maintenance decision-making policy presented in this paper can provide a practical reference for equipment maintenance.
基金the National Natural Science Foundation of China(Nos.61473211 and 71171130)
文摘A proactive approach is constructed to cope with the integrated problem of batch production and maintenance in a deteriorating system. The condition of the system is modeled by a proportional hazards model(PHM) which considers both system deterioration state and usage. The deterioration state of system is uncertain and is only observed between batches. An integration model for optimizing production plan and conditionbased maintenance(CBM) policy is proposed, in which the maintenance threshold and production quantity are proactively decided simultaneously. To obtain a robust solution with minimal cost over the planning horizon, a simulation-based iterative algorithm is developed to solve the complicated non-linear model. Numerical results show that the performance of the developed approach is satisfactory under uncertainty.
基金supported by the National Natural Science Foundation of China(51705221)the China Scholarship Council(201606830028)+1 种基金the Fundamental Research Funds for the Central Universities(NS2015072)the Funding of Jiangsu Innovation Program for Graduate Education(KYLX15 0313)
文摘Most of the maintenance optimization models in condition-based maintenance(CBM) consider the cost-optimal criterion, but few papers have dealt with availability maximization for maintenance applications. A novel optimal Bayesian control approach is presented for maintenance decision making. The system deterioration evolves as a three-state continuous time hidden semi-Markov process. Considering the optimal maintenance policy, the multivariate Bayesian control scheme based on the hidden semi-Markov model(HSMM) is developed, the objective is to maximize the long-run expected average availability per unit time. The proposed approach can optimize the sampling interval and control limit jointly. A case study using Markov chain Monte Carlo(MCMC)simulation is provided and a comparison with the Bayesian control scheme based on hidden Markov model(HMM), the age-based replacement policy, Hotelling’s T2, multivariate exponentially weihted moving average(MEWMA) and multivariate cumulative sum(MCUSUM) control charts is given, which illustrates the effectiveness of the proposed method.
基金Fundamental Research Funds for the Central Universities,China(No.DUT17GF214)
文摘Condition monitoring is increasingly used to anticipate and detect failures of industrial machines.Failures of machines can cause high maintenance or replacement costs.If neglected,it may result in catastrophic accidents leading to production shrinkage.The potential failure would negatively affect the profitability of the company,including production shut down,cost of spare parts,cost of labor,damage of reputation,risk of injury to people and the environment.In recent years,condition-based maintenance( CBM) and prognostic and health management( PHM) are developed and formed a strong connection among science,engineering,computer,reliability,communication,management,etc.Computerized maintenance management systems( CMMS) store a lot of data regarding the fault diagnosis and life prediction of the machinery equipment.It's too necessary to uncover useful knowledge from the huge amount of data.It's vital to find the ways to obtain useful and concise information from these data.This information can be of great influence in the decision making of managers.This article is a review of intelligent approaches in machinery faults diagnosis and prediction based on PHM and CBM.
文摘With the further development of service-oriented,performance-based contracting(PBC)has been widely adopted in industry and manufacturing.However,maintenance optimization problems under PBC have not received enough attention.To further extend the scope of PBC’s application in the field of maintenance optimization,we investigate the condition-based maintenance(CBM)optimization for gamma deteriorating systems under PBC.Considering the repairable single-component system subject to the gamma degradation process,this paper proposes a CBM optimization model to maximize the profit and improve system performance at a relatively low cost under PBC.In the proposed CBM model,the first inspection interval has been considered in order to reduce the inspection frequency and the cost rate.Then,a particle swarm algorithm(PSO)and related solution procedure are presented to solve the multiple decision variables in our proposed model.In the end,a numerical example is provided so as to demonstrate the superiority of the presented model.By comparing the proposed policy with the conventional ones,the superiority of our proposed policy is proved,which can bring more profits to providers and improve performance.Sensitivity analysis is conducted in order to research the effect of corrective maintenance cost and time required for corrective maintenance on optimization policy.A comparative study is given to illustrate the necessity of distinguishing the first inspection interval or not.
文摘In the process of power supply of power system, the development of primary equipment overhaul of substation is facing many challenges. Further analysis of the current status of power and electrical equipment maintenance and repair, so as to formulate targeted improvement strategies, is the fundamental measure to comprehensively improve the level of power and electrical equipment maintenance and maintenance of normal operation of the equipment.
基金performed within the project ARCWIND-adaptation and implementation of floating wind energy conversion technology for the Atlantic region-which is co-financed by the European Regional Development Fund through the Interreg Atlantic Area Program under contract EAPA 344/2016
文摘The existing maintenance strategies of offshore wind energy are reviewed including the specific aspects of condition-based maintenance, focusing on three primary phases, namely, condition monitoring, fault diagnosis and prognosis, and maintenance optimization. Relevant academic research and industrial applications are identified and summarized. The state of art, capabilities,and constraints of condition-based maintenance are analyzed. The presented research demonstrates that the intelligent-based approach has become a promising solution for condition recognition, and an integrated data platform for offshore wind farms is significant to optimize the maintenance activities.
文摘Overview about three key contents of condition-based maintenance decision-making of a multi-component system is analyzed based on maintenance optimization and modeling. The component deterioration model, the correlation between the degraded components and the system configuration are analyzed separately in the deterioration model of multi-component system.For the maintenance polices,the opportunistic maintenance( OM)policy and the grouping maintenance( GM) policy are analyzed and summarized in combination with the condition-based maintenance( CBM) modeling of multi-component system. It is put forward that CBM modeling of multi-component system should be further researched based on the inspection interval and the maintenance threshold of multi-component system in availability.
基金supported by the National Natural Science Foundation of China (71901216)。
文摘An effective maintenance policy optimization model can reduce maintenance cost and system operation risk. For mission-oriented systems, the degradation process changes dynamically and is monotonous and irreversible. Meanwhile, the risk of early failure is high. Therefore, this paper proposes a dynamic condition-based maintenance(CBM) optimization model for mission-oriented system based on inverse Gaussian(IG) degradation process. Firstly, the IG process with random drift coefficient is used to describe the degradation process and the relevant probability distributions are obtained. Secondly, the dynamic preventive maintenance threshold(DPMT) function is used to control the early failure risk of the mission-oriented system, and the influence of imperfect preventive maintenance(PM)on the degradation amount and degradation rate is analysed comprehensively. Thirdly, according to the mission availability requirement, the probability formulas of different types of renewal policies are obtained, and the CBM optimization model is constructed. Finally, a numerical example is presented to verify the proposed model. The comparison with the fixed PM threshold model and the sensitivity analysis show the effectiveness and application value of the optimization model.
基金supported by the Scientific Research Foundation for the Returned Overseas Chinese Scholars, StateEducation Ministry.
文摘The evolution of maintenance management is briefly introduced in this paper, from corrective maintenance to preventive maintenance. First, a range of condition monitoring and fault diagnosis techniques developed in different industries are surveyed; Second, many methods of condition monitoring are presented; Third, mathematical methods used in condition monitoring are given; Then the merits and shortcomings are discussed. Efficient maintenance policies are of fundamental importance in system engineering because of their fallbacks into the safety and economics of plant operation. Applying condition-based maintenance to a system can reduce the cost and extend the availability of facilities. With the advent of personal computers as fast and cost effective machines for data acquisition and processing of multiple signals some shortcomings mentioned in condition monitoring could be solved or reduced to some extent. These PCs can be a solution as a condition monitoring based maintenance system.
文摘The development process of high-voltage electric power equipment maintenance was introduced. It is pointed out that the trend of high-voltage electric power equipment maintenance is so called condition-based maintenance. With the development of computer technology and sensors, on-line monitoring of high-voltage electric power equipment has developed rapidly. By introducing the main principle of Schering bridge to measure tanδ, the way of on-line monitoring of high-voltage electric power equipment was explained. Difference methods of on-line monitoring of insulation parameters for 35 kV substation were discussed. Finally, the shortcomings as well as its tendency of on-line monitoring were analyzed.
基金National Natural Science Foundation of China(No.61867003)Youth Science Fund Program of Lanzhou Jiaotong University(No.2019031)。
文摘To improve the operation and maintenance management level of large repairable components,such as electrical equipment,large nuclear power facilities,and high-speed electric multiple unit(EMU),and increase economic benefits,preventive maintenance has been widely used in industrial enterprises in recent years.Focusing on the problems of high maintenance costs and considerable failure hazards of EMU components in operation,we establish a state preventive maintenance model based on a stochastic differential equation.Firstly,a state degradation model of the repairable components is established in consideration of the degradation of the components and external random interference.Secondly,based on topology and martingale theory,the state degradation model is analyzed,and its simplex,stopping time,and martingale properties are proven.Finally,the monitoring data of the EMU components are taken as an example,analyzed and simulated to verify the effectiveness of the model.
基金supported in part by the National Natural Science Foundation of China(No.52467008)Gansu Provincial Depatment of Education Youth Doctoral Suppo Project(2024QB-051).
文摘Addressing the limitations of inadequate stochastic disturbance characterization during wind turbine degradation processes that result in constrained modeling accuracy,replacement-based maintenance practices that deviate from actual operational conditions,and static maintenance strategies that fail to adapt to accelerated deterioration trends leading to suboptimal remaining useful life utilization,this study proposes a Time-Based Incomplete Maintenance(TBIM)strategy incorporating reliability constraints through stochastic differential equations(SDE).By quantifying stochastic interference via Brownian motion terms and characterizing nonlinear degradation features through state influence rate functions,a high-precision SDE degradation model is constructed,achieving 16%residual reduction compared to conventional ordinary differential equation(ODE)methods.The introduction of age reduction factors and failure rate growth factors establishes an incomplete maintenance mechanism that transcends traditional“as-good-as-new”assumptions,with the TBIM model demonstrating an additional 8.5%residual reduction relative to baseline SDE approaches.A dynamic maintenance interval optimization model driven by dual parameters—preventive maintenance threshold R_(p) and replacement threshold R_(r)—is designed to achieve synergistic optimization of equipment reliability and maintenance economics.Experimental validation demonstrates that the optimized TBIM extends equipment lifespan by 4.4%and reducesmaintenance costs by 4.16%at R_(p)=0.80,while achieving 17.2%lifespan enhancement and 14.6%cost reduction at R_(p)=0.90.This methodology provides a solution for wind turbine preventive maintenance that integrates condition sensitivity with strategic foresight.
基金This work is supported by National Natural Science Foundation of China under grants 71531010 and 71831006.
文摘Condition-based maintenance(CBM)detects early signs of failure and dictates when maintenance should be performed based on the actual condition of a system.In this paper,we first review some of the recent research on CBM under various physical structures and signal data.Then,we summarize several kinds of prognostic models that use monitoring information to estimate the reliability of complex systems or products.Monitoring information also facilitates operational decisions in production planning,spare parts management,reliability improvement,and prognostics and health management.Finally,we suggest some research opportunities for the reliability and operations management communities to fill the research gap between these two fields.
基金supported by the National Natural Science Foundation of China(No.51767017)the Key Research and Development Program of Gansu Province(No.25YFGA032)the Industry Support and Guidance Project for Higher Education Institutions of Gansu Province(No.2022CYZC-22).
文摘In view of the insufficient utilization of condition-monitoring information and the improper scheduling often observed in conventional maintenance strategies for photovoltaic(PV)modules,this study proposes a predictive maintenance(PdM)strategy based on Remaining Useful Life(RUL)estimation.First,a RUL prediction model is established using the Transformer architecture,which enables the effective processing of sequential degradation data.By employing the historical degradation data of PV modules,the proposed model provides accurate forecasts of the remaining useful life,thereby supplying essential inputs for maintenance decision-making.Subsequently,the RUL information obtained from the prediction process is integrated into the optimization of maintenance policies.An opposition-based learning Harris Hawks Optimization(OHHO)algorithm is introduced to jointly optimize two critical parameters:the maintenance threshold L,which specifies the degradation level at which maintenance should be performed,and the recovery factor r,which reflects the extent to which the system performance is restored after maintenance.The objective of this joint optimization is to minimize the overall operation and maintenance cost while maintaining system availability.Finally,simulation experiments are conducted to evaluate the performance of the proposed PdM strategy.The results indicate that,compared with conventional corrective maintenance(CM)and periodic maintenance(PM)strategies,the RUL-driven PdM approach achieves a reduction in the average cost rate by approximately 20.7%and 17.9%,respectively,thereby demonstrating its potential effectiveness for practical PV maintenance applications.
