Electroacoustic Tomography(EAT)is an imaging technique that detects ultrasound waves induced by electrical pulses,offering a solution for real-time electroporation monitoring.This study presents EAT system using a dua...Electroacoustic Tomography(EAT)is an imaging technique that detects ultrasound waves induced by electrical pulses,offering a solution for real-time electroporation monitoring.This study presents EAT system using a dual-frequency ultrasound array.The broadband nature of electroacoustic signals requires ultrasound detector to cover both the high-frequency range(around 6MHz)signals generated by small targets and the low-frequency range(around 1MHz)signals generated by large targets.In our EAT system,we use the 6 MHz array to detect high-frequency signals from the electrodes,and the 1 MHz array for the electrical field.To test this,we conducted simulations using COMSOL Multiphysics^(®) and MATLAB's k-Wave toolbox,followed by experiments using a custom-built setup with a dual-frequency transducer and real-time data acquisition.The results demonstrated that the dual-frequency EAT system could accurately and simultaneously monitor the electroporation process,effectively showing both the treatment area and electrode placement with the application of 1 kV electric pulses with 100 ns duration.The axial resolution of the 6MHz array for EAT was 0.45 mm,significantly better than the 2mm resolution achieved with the 1MHz array.These findings validate the potential of dual-frequency EAT as a superior method for real-time electroporation monitoring.展开更多
As a fundamental component in computer vision,edges can be categorized into four types based on discontinuities in reflectance,illumination,surface normal,or depth.While deep CNNs have significantly advanced generic e...As a fundamental component in computer vision,edges can be categorized into four types based on discontinuities in reflectance,illumination,surface normal,or depth.While deep CNNs have significantly advanced generic edge detection,real-time multi-class semantic edge detection under resource constraints remains challenging.To address this,we propose a lightweight framework based on PiDiNet that enables fine-grained semantic edge detection.Our model simultaneously predicts background and four edge categories from full-resolution inputs,balancing accuracy and efficiency.Key contributions include:a multi-channel output structure expanding binary edge prediction to five classes,supported by a deep supervision mechanism;a dynamic class-balancing strategy combining adaptive weighting with physical priors to handle extreme class imbalance;and maintained architectural efficiency enabling real-time inference.Extensive evaluations on BSDS-RIND show our approach achieves accuracy competitive with state-of-the-art methods while operating in real time.展开更多
Background:The long-term outcomes of robotic-assisted surgery and the prognostic significance of the pretreatment neutrophil-to-lymphocyte ratio(NLR)in locally advanced rectal cancer(LARC)remain uncertain.This study a...Background:The long-term outcomes of robotic-assisted surgery and the prognostic significance of the pretreatment neutrophil-to-lymphocyte ratio(NLR)in locally advanced rectal cancer(LARC)remain uncertain.This study aimed to assess the long-term outcomes of patients with LARC undergoing robotic-assisted surgery and to determine the prognostic value of pretreatment NLR.Methods:We retrospectively reviewed 252 patients with LARC who were treated at a single medical center in Taiwan between January 2012 and January 2023.All patients underwent neoadjuvant concurrent chemoradiotherapy(CRT)followed by robotic-assisted surgery with total mesorectal excision(TME).Patients were stratified into four groups on the basis of pretreatment NLRs and carcinoembryonic antigen(CEA)levels.Univariate and multivariate analyses were conducted to identify prognostic indicators for overall survival(OS)and disease-free survival(DFS).Results:Patients with a pretreatment NLR of≥3.2 exhibited significantly worse OS and DFS compared with those with an NLR of<3.2(OS:94.4 vs.116.5 months,p=0.001;DFS:78.8 vs.101.7 months,p=0.003).Group A exhibited the poorest prognosis,whereas Group D had the most favorable outcomes.Multivariate analysis revealed NLR≥3.2 as an independent predictor of poor OS(hazard ratio[HR]=2.306,95%CI:1.149-3.747;p=0.001)and DFS(HR=2.055,95%CI:1.341-3.148;p=0.001).Conclusion:Neoadjuvant concurrent CRT followed by robotic-assisted TME is an effective treatment strategy for LARC.A higher pretreatment NLR(≥3.2)independently predicted worse OS and DFS.Stratification using the NLR in combination with CEA levels may enhance prognostic accuracy for patients undergoing robotic-assisted surgery for LARC.展开更多
In the era of the Internet of Things,distributed computing alleviates the problem of insufficient terminal computing power by integrating idle resources of heterogeneous devices.However,the imbalance between task exec...In the era of the Internet of Things,distributed computing alleviates the problem of insufficient terminal computing power by integrating idle resources of heterogeneous devices.However,the imbalance between task execution delay and node energy consumption,and the scheduling and adaptation challenges brought about by device heterogeneity,urgently need to be addressed.To tackle this problem,this paper constructs a multi-objective real-time task scheduling model that considers task real-time performance,execution delay,system energy consumption,and node interests.The model aims to minimize the delay upper bound and total energy consumption while maximizing system satisfaction.A real-time task scheduling algorithm based on bilateral matching game is proposed.By designing a bidirectional preference mechanism between tasks and computing nodes,combined with a multi-round stable matching strategy,accurate matching between tasks and nodes is achieved.Simulation results show that compared with the baseline scheme,the proposed algorithm significantly reduces the total execution cost,effectively balances the task execution delay and the energy consumption of compute nodes,and takes into account the interests of each network compute node.展开更多
During geothermal resource exploitation,the potential deterioration of mechanical properties in high-temperature granite subjected to cooling poses a significant safety concern.To address this,the present study invest...During geothermal resource exploitation,the potential deterioration of mechanical properties in high-temperature granite subjected to cooling poses a significant safety concern.To address this,the present study investigates the coupled thermo-mechanical behavior of granite during heating and cooling through a combination of laboratory tests and finite difference method analysis.Initial investigations involve X-ray diffraction,thermal expansion test,thermogravimetric analysis,and uniaxial compression test.Results show the significant variations of granite properties under different thermal conditions,attributed to temperature gradients,water evaporation,and mineral phase transitions.Subsequently,a model considering temperature-dependent parameters and real-time cooling rates was employed to simulate linear heating and nonlinear cooling processes.Simulation results indicate that the thermal cracking predominantly occurs during the heating stage,with tensile failure as the primary mode.Additionally,a faster real-time cooling rate at higher temperatures intensifies the thermal cracking behavior in granite.This study effectively elucidates the thermomechanical coupling behavior of granite during heating and cooling processes,providing insights into the mechanisms of mechanical property changes with rising or decreasing temperatures.展开更多
The intelligent environmental sensing systems are quickly transforming the sparse and retrospective monitoring to dense and decision-oriented environmental intelligence.This review brings together the manner in which ...The intelligent environmental sensing systems are quickly transforming the sparse and retrospective monitoring to dense and decision-oriented environmental intelligence.This review brings together the manner in which integration of Internet of Things(IoT)sensing,edge computing,and real-time analytics facilitates timely detection,interpretation,and prediction of the environmental conditions across the applications,such as urban air quality,watershed and coastal surveillance,industrial safety,agriculture,and disaster response.We define end-to-end architectural patterns to organize devices,edge nodes,and cloud services to satisfy latency,reliability,bandwidth,and governance constraints with emphasis on event-time processing,adaptive offloading,and hierarchical aggregation.Then we look at sensing and infrastructure foundations,emphasizing the effects of sensor modality and power autonomy,connectivity,and the practices of calibration on the practicable analytics and eventual plausibility.It is on this basis that we examine real-time analytics pipelines and Artificial Intelligence(AI)techniques to preprocess,sensor combine,anomaly detect,and short-horizon forecast,with a focus on edge-deployable models,quantification of uncertainties,and query resistance to drift and domain shift.Lastly,we address the realities of deployment that condition operational success,such as lifecycle engineering,provenance-aware data management,security and privacy risks,ethical governance,and evaluation methodologies,which place end-to-end latency and field generalization as a priority.This review offers cohesion to algorithmic capabilities and systems engineering and governance to define an overall framework,show open areas of research directions,and provide practical recommendations on how to design trustworthy,scalable,and sustainable environmental monitoring systems.展开更多
To investigate the energy relief effect of real-time drilling in preventing rockburst in high-stress rock,a series of high-stress real-time drilling uniaxial compression tests were conducted on red sandstone specimens...To investigate the energy relief effect of real-time drilling in preventing rockburst in high-stress rock,a series of high-stress real-time drilling uniaxial compression tests were conducted on red sandstone specimens using the SG4500 drilling rig.Results showed that the mechanical behavior(i.e.peak strength and rockburst intensity)of the rock was weakened under high-stress real-time drilling and exhibited a downward trend as the drilling diameter increased.The real-time drilling energy dissipation index(ERD)was proposed to characterize the energy relief during high-stress real-time drilling.The ERD exhibited a linear increase with the real-time drilling diameter.Furthermore,the elastic strain energy of post-drilling rock showed a linear relationship with the square of stress across different stress levels,which also applied to the peak elastic strain energy and the square of peak stress.This findingreveals the intrinsic link between the weakening effect of peak elastic strain energy and peak strength due to high-stress real-time drilling,confirmingthe consistency between energy relief and pressure relief effects.By establishing relationships among rockburst proneness,peak elastic strain energy,and peak strength,it was demonstrated that high-stress real-time drilling reduces rockburst proneness through energy dissipation.Specifically,both peak elastic strain energy and rockburst proneness decreased with larger drill bit diameters,consistent with reductions in peak strength,rockburst intensity,and fractal dimensions of high-stress real-time drilled rock.These results validate the energy relief mechanism of real-time drilling in mitigating rockburst risks.展开更多
An innovative real-time monitoring method for surrounding rock damage based on microseismic time-lapse double-difference tomography is proposed for delayed dynamic damage identification and insufficient detection of a...An innovative real-time monitoring method for surrounding rock damage based on microseismic time-lapse double-difference tomography is proposed for delayed dynamic damage identification and insufficient detection of adverse geological conditions in deep-buried tunnel construction.The installation techniques for microseismic sensors were optimized by mounting sensors at bolt ends which significantly improves signal-to-noise ratio(SNR)and anti-interference capability compared to conventional borehole placement.Subsequently,a 3D wave velocity evolution model that incorporates construction-induced disturbances was established,enabling the first visualization of spatiotemporal variations in surrounding rock wave velocity.It finds significant wave velocity reduction near the tunnel face,with roof and floor damage zones extending 40–50 m;wave velocities approaching undisturbed levels at 15 m ahead of the working face and on the laterally undisturbed side;pronounced spatial asymmetry in wave velocity distribution—values on the left side exceed those on the right,with a clear stress concentration or transition zone located 10–15 m;and systematically lower velocities behind the face than in front,indicating asymmetric rock damage development.These results provide essential theoretical support and practical guidance for optimizing dynamic construction strategies,enabling real-time adjustment of support parameters,and establishing safety early warning systems in deep-buried tunnel engineering.展开更多
Online examinations have become a dominant assessment mode,increasing concerns over academic integrity.To address the critical challenge of detecting cheating behaviours,this study proposes a hybrid deep learning appr...Online examinations have become a dominant assessment mode,increasing concerns over academic integrity.To address the critical challenge of detecting cheating behaviours,this study proposes a hybrid deep learning approach that combines visual detection and temporal behaviour classification.The methodology utilises object detection models—You Only Look Once(YOLOv12),Faster Region-based Convolutional Neural Network(RCNN),and Single Shot Detector(SSD)MobileNet—integrated with classification models such as Convolutional Neural Networks(CNN),Bidirectional Gated Recurrent Unit(Bi-GRU),and CNN-LSTM(Long Short-Term Memory).Two distinct datasets were used:the Online Exam Proctoring(EOP)dataset from Michigan State University and the School of Computer Science,Duy Tan Unievrsity(SCS-DTU)dataset collected in a controlled classroom setting.A diverse set of cheating behaviours,including book usage,unauthorised interaction,internet access,and mobile phone use,was categorised.Comprehensive experiments evaluated the models based on accuracy,precision,recall,training time,inference speed,and memory usage.We evaluate nine detector-classifier pairings under a unified budget and score them via a calibrated harmonic mean of detection and classification accuracies,enabling deployment-oriented selection under latency and memory constraints.Macro-Precision/Recall/F1 and Receiver Operating Characteristic-Area Under the Curve(ROC-AUC)are reported for the top configurations,revealing consistent advantages of object-centric pipelines for fine-grained cheating cues.The highest overall score is achieved by YOLOv12+CNN(97.15%accuracy),while SSD-MobileNet+CNN provides the best speed-efficiency trade-off for edge devices.This research provides valuable insights into selecting and deploying appropriate deep learning models for maintaining exam integrity under varying resource constraints.展开更多
The highly dynamic nature,strong uncertainty,and coupled multiple safety constraints inherent in carrier aircraft recovery operations pose severe challenges for real-time decision-making.Addressing bolter scenarios,th...The highly dynamic nature,strong uncertainty,and coupled multiple safety constraints inherent in carrier aircraft recovery operations pose severe challenges for real-time decision-making.Addressing bolter scenarios,this study proposes an intelligent decision-making framework based on a deep long short-term memory Q-network.This framework transforms the real-time sequencing for bolter recovery problem into a partially observable Markov decision process.It employs a stacked long shortterm memory network to accurately capture the long-range temporal dependencies of bolter event chains and fuel consumption.Furthermore,it integrates a prioritized experience replay training mechanism to construct a safe and adaptive scheduling system capable of millisecond-level real-time decision-making.Experimental demonstrates that,within large-scale mass recovery scenarios,the framework achieves zero safety violations in static environments and maintains a fuel safety violation rate below 10%in dynamic scenarios,with single-step decision times at the millisecond level.The model exhibits strong generalization capability,effectively responding to unforeseen emergent situations—such as multiple bolters and fuel emergencies—without requiring retraining.This provides robust support for efficient carrier-based aircraft recovery operations.展开更多
A real time concurrent product and process design system for mechanical parts is described in this paper. It consists of integrated product model, the expert system of product manufacturability evaluation and the con...A real time concurrent product and process design system for mechanical parts is described in this paper. It consists of integrated product model, the expert system of product manufacturability evaluation and the controller of concurrent design. With the help of the controller of concurrent design, each feature of a part can be designed and evaluated based on manufacturing knowledge and resources, and can be modified according to the results of evaluation. The machining method of design feature can be selected based on manufacturing knowledge. So real time concurrent product and process design can be implemented based on integrated product model that is established based on generalized feature. Products and its design process can be optimized with the help of this system. The information and function integration of product design process can be realized. The time to market and the cost of products can be reduced.展开更多
This paper deals with control system design and implementation problems encountered in multiple robot systems. The methodology developed is depicted by a set of coordination mechanisms using hierarchical net structure...This paper deals with control system design and implementation problems encountered in multiple robot systems. The methodology developed is depicted by a set of coordination mechanisms using hierarchical net structures and their accompanying rules. With the net models, the hierarchical and distributed control system is designed for an assembly task. Synchronization commands allow coordination of the movements of the robots. The net models make concurrency of the movements of the robots transparent to users. The net based machine controller executes robot motion control through the communication with the external robot controller using the command/response concept. Sensory signals indicating the change of state of robots are used to trigger or initiate tasks. Simultaneous movement of the robots is obtained by creating different background threads running in parallel under Windows OS. The multilevel hierarchical control system can be consistently constructed using net models.展开更多
Secure real-time databases must simultaneously satisfy two requirements in guaranteeing data security and minimizing the missing deadlines ratio of transactions. However, these two requirements can conflict with each ...Secure real-time databases must simultaneously satisfy two requirements in guaranteeing data security and minimizing the missing deadlines ratio of transactions. However, these two requirements can conflict with each other and achieve one requirement is to sacrifice the other. This paper presents a secure real-time concurrency control protocol based on optimistic method. The concurrency control protocol incorporates security constraints in a real-time optimistic concurrency control protocol and makes a suitable tradeoff between security and real-time requirements by introducing secure influence factor and real-time influence factor. The experimental results show the concurrency control protocol achieves data security without degrading real-time perform ance significantly.展开更多
An integrated method for concurrency control in parallel real-time databases has been proposed in this paper. The nested transaction model has been investigated to offer more atomic execution units and finer grained c...An integrated method for concurrency control in parallel real-time databases has been proposed in this paper. The nested transaction model has been investigated to offer more atomic execution units and finer grained control within in a transaction. Based on the classical nested locking protocol and the speculative concurrency control approach, a two-shadow adaptive concurrency control protocol, which combines the Sacrifice based Optimistic Concurrency Control (OPT-Sacrifice) and High Priority two-phase locking (HP2PL) algorithms together to support both optimistic and pessimistic shadow of each sub-transaction, has been proposed to increase the likelihood of successful timely commitment and to avoid unnecessary replication overload.展开更多
In the foundry industries,process design has traditionally relied on manuals and complex theoretical calculations.With the advent of 3D design in casting,computer-aided design(CAD)has been applied to integrate the fea...In the foundry industries,process design has traditionally relied on manuals and complex theoretical calculations.With the advent of 3D design in casting,computer-aided design(CAD)has been applied to integrate the features of casting process,thereby expanding the scope of design options.These technologies use parametric model design techniques for rapid component creation and use databases to access standard process parameters and design specifications.However,3D models are currently still created through inputting or calling parameters,which requires numerous verifications through calculations to ensure the design rationality.This process may be significantly slowed down due to repetitive modifications and extended design time.As a result,there are increasingly urgent demands for a real-time verification mechanism to address this issue.Therefore,this study proposed a novel closed-loop model and software development method that integrated contextual design with real-time verification,dynamically verifying relevant rules for designing 3D casting components.Additionally,the study analyzed three typical closed-loop scenarios of agile design in an independent developed intelligent casting process system.It is believed that foundry industries can potentially benefit from favorably reduced design cycles to yield an enhanced competitive product market.展开更多
Autologous bone marrow-derived mesenchymal stem cells(BMSCs)have been shown to promote osteogenesis;however,the effects of allogeneic BMSCs(allo-BMSCs)on bone regeneration remain unclear.Therefore,we explored the bone...Autologous bone marrow-derived mesenchymal stem cells(BMSCs)have been shown to promote osteogenesis;however,the effects of allogeneic BMSCs(allo-BMSCs)on bone regeneration remain unclear.Therefore,we explored the bone regeneration promotion effect of allo-BMSCs in 3D-printed autologous bone particle(ABP)scaffolds.First,we concurrently printed scaffolds with polycaprolactone,ABPs,and allo-BMSCs for appropriate support,providing bioactive factors and seed cells to promote osteogenesis.In vitro studies showed that ABP scaffolds promoted allo-BMSC osteogenic differentiation.In vivo studies revealed that the implantation of scaffolds loaded with ABPs and allo-BMSCs into canine skull defects for nine months promoted osteogenesis.Further experiments suggested that only a small portion of implanted allo-BMSCs survived and differentiated into vascular endothelial cells,chondrocytes,and osteocytes.The implanted allo-BMSCs released stromal cell-derived factor 1 through paracrine signaling to recruit native BMSCs into the defect,promoting bone regeneration.This study contributes to our understanding of allo-BMSCs,providing information relevant to their future application.展开更多
Deep learning-based intelligent recognition algorithms are increasingly recognized for their potential to address the labor-intensive challenge of manual pest detection.However,their deployment on mobile devices has b...Deep learning-based intelligent recognition algorithms are increasingly recognized for their potential to address the labor-intensive challenge of manual pest detection.However,their deployment on mobile devices has been constrained by high computational demands.Here,we developed GBiDC-PEST,a mobile application that incorporates an improved,lightweight detection algorithm based on the You Only Look Once(YOLO)series singlestage architecture,for real-time detection of four tiny pests(wheat mites,sugarcane aphids,wheat aphids,and rice planthoppers).GBiDC-PEST incorporates several innovative modules,including GhostNet for lightweight feature extraction and architecture optimization by reconstructing the backbone,the bi-directional feature pyramid network(BiFPN)for enhanced multiscale feature fusion,depthwise convolution(DWConv)layers to reduce computational load,and the convolutional block attention module(CBAM)to enable precise feature focus.The newly developed GBiDC-PEST was trained and validated using a multitarget agricultural tiny pest dataset(Tpest-3960)that covered various field environments.GBiDC-PEST(2.8 MB)significantly reduced the model size to only 20%of the original model size,offering a smaller size than the YOLO series(v5-v10),higher detection accuracy than YOLOv10n and v10s,and faster detection speed than v8s,v9c,v10m and v10b.In Android deployment experiments,GBiDCPEST demonstrated enhanced performance in detecting pests against complex backgrounds,and the accuracy for wheat mites and rice planthoppers was improved by 4.5-7.5%compared with the original model.The GBiDC-PEST optimization algorithm and its mobile deployment proposed in this study offer a robust technical framework for the rapid,onsite identification and localization of tiny pests.This advancement provides valuable insights for effective pest monitoring,counting,and control in various agricultural settings.展开更多
Large portions of the tunnel boring machine(TBM)construction cost are attributed to disc cutter consumption,and assessing the disc cutter's wear level can help determine the optimal time to replace the disc cutter...Large portions of the tunnel boring machine(TBM)construction cost are attributed to disc cutter consumption,and assessing the disc cutter's wear level can help determine the optimal time to replace the disc cutter.Therefore,the need to monitor disc cutter wear in real-time has emerged as a technical challenge for TBMs.In this study,real-time disc cutter wear monitoring is developed based on sound and vibration sensors.For this purpose,the microphone and accelerometer were used to record the sound and vibration signals of cutting three different types of rocks with varying abrasions on a laboratory scale.The relationship between disc cutter wear and the sound and vibration signal was determined by comparing the measurements of disc cutter wear with the signal plots for each sample.The features extracted from the signals showed that the sound and vibration signals are impacted by the progression of disc wear during the rock-cutting process.The signal features obtained from the rock-cutting operation were utilized to verify the machine learning techniques.The results showed that the multilayer perceptron(MLP),random subspace-based decision tree(RS-DT),DT,and random forest(RF)methods could predict the wear level of the disc cutter with an accuracy of 0.89,0.951,0.951,and 0.927,respectively.Based on the accuracy of the models and the confusion matrix,it was found that the RS-DT model has the best estimate for predicting the level of disc wear.This research has developed a method that can potentially determine when to replace a tool and assess disc wear in real-time.展开更多
In parallel real-time database systems, concurrency control protocols must satisfy time constraints as well as the integrity constraints. The authors present a validation concurrency control(VCC) protocol, which can e...In parallel real-time database systems, concurrency control protocols must satisfy time constraints as well as the integrity constraints. The authors present a validation concurrency control(VCC) protocol, which can enhance the performance of real-time concurrency control mechanism by reducing the number of transactions that might miss their deadlines, and compare the performance of validation concurrency control protocol with that of HP2PL(High priority two phase locking) protocol and OCC-TI-WAIT-50(Optimistic concurrency control-time interval-wait-50) protocol under shared-disk architecture by simulation. The simulation results reveal that the protocol the author presented can effectively reduce the number of transactions restarting which might miss their deadlines and performs better than HP2PL and OCC-TI-WAIT-50. It works well when arrival rate of transaction is lesser than threshold. However, due to resource contention the percentage of missing deadline increases sharply when arrival rate is greater than the threshold.展开更多
基金supported by the National Institute of Health(R37CA240806,U01CA288351,and R50CA283816)support from UCI Chao Family Comprehensive Cancer Center(P30CA062203).
文摘Electroacoustic Tomography(EAT)is an imaging technique that detects ultrasound waves induced by electrical pulses,offering a solution for real-time electroporation monitoring.This study presents EAT system using a dual-frequency ultrasound array.The broadband nature of electroacoustic signals requires ultrasound detector to cover both the high-frequency range(around 6MHz)signals generated by small targets and the low-frequency range(around 1MHz)signals generated by large targets.In our EAT system,we use the 6 MHz array to detect high-frequency signals from the electrodes,and the 1 MHz array for the electrical field.To test this,we conducted simulations using COMSOL Multiphysics^(®) and MATLAB's k-Wave toolbox,followed by experiments using a custom-built setup with a dual-frequency transducer and real-time data acquisition.The results demonstrated that the dual-frequency EAT system could accurately and simultaneously monitor the electroporation process,effectively showing both the treatment area and electrode placement with the application of 1 kV electric pulses with 100 ns duration.The axial resolution of the 6MHz array for EAT was 0.45 mm,significantly better than the 2mm resolution achieved with the 1MHz array.These findings validate the potential of dual-frequency EAT as a superior method for real-time electroporation monitoring.
基金supported by the National Natural Science Foundation of China 62402171.
文摘As a fundamental component in computer vision,edges can be categorized into four types based on discontinuities in reflectance,illumination,surface normal,or depth.While deep CNNs have significantly advanced generic edge detection,real-time multi-class semantic edge detection under resource constraints remains challenging.To address this,we propose a lightweight framework based on PiDiNet that enables fine-grained semantic edge detection.Our model simultaneously predicts background and four edge categories from full-resolution inputs,balancing accuracy and efficiency.Key contributions include:a multi-channel output structure expanding binary edge prediction to five classes,supported by a deep supervision mechanism;a dynamic class-balancing strategy combining adaptive weighting with physical priors to handle extreme class imbalance;and maintained architectural efficiency enabling real-time inference.Extensive evaluations on BSDS-RIND show our approach achieves accuracy competitive with state-of-the-art methods while operating in real time.
基金supported by grants through funding from the National Science and Technology Council(NSTC112-2314-B-037-050-MY3,NSTC114-2314-B-037-103-MY3,NSTC114-2321-B-037-003)the Ministry of Health and Welfare(MOHW113-TDU-B-222-134014)+2 种基金funded by the health and welfare surcharge of on tobacco products,and the Kaohsiung Medical University Hospital(KMUH113-3R31,KMUH113-3R32,KMUH113-3R33,KMUH113-3M58,KMUH113-3M59,KMUH-S11412,KMUH-SH11403)Kaohsiung Medical University Research Center Grant(KMU-TC113A04)supported by the Grant of Taiwan Precision Medicine Initiative and Taiwan Biobank,Academia Sinica,Taiwan.
文摘Background:The long-term outcomes of robotic-assisted surgery and the prognostic significance of the pretreatment neutrophil-to-lymphocyte ratio(NLR)in locally advanced rectal cancer(LARC)remain uncertain.This study aimed to assess the long-term outcomes of patients with LARC undergoing robotic-assisted surgery and to determine the prognostic value of pretreatment NLR.Methods:We retrospectively reviewed 252 patients with LARC who were treated at a single medical center in Taiwan between January 2012 and January 2023.All patients underwent neoadjuvant concurrent chemoradiotherapy(CRT)followed by robotic-assisted surgery with total mesorectal excision(TME).Patients were stratified into four groups on the basis of pretreatment NLRs and carcinoembryonic antigen(CEA)levels.Univariate and multivariate analyses were conducted to identify prognostic indicators for overall survival(OS)and disease-free survival(DFS).Results:Patients with a pretreatment NLR of≥3.2 exhibited significantly worse OS and DFS compared with those with an NLR of<3.2(OS:94.4 vs.116.5 months,p=0.001;DFS:78.8 vs.101.7 months,p=0.003).Group A exhibited the poorest prognosis,whereas Group D had the most favorable outcomes.Multivariate analysis revealed NLR≥3.2 as an independent predictor of poor OS(hazard ratio[HR]=2.306,95%CI:1.149-3.747;p=0.001)and DFS(HR=2.055,95%CI:1.341-3.148;p=0.001).Conclusion:Neoadjuvant concurrent CRT followed by robotic-assisted TME is an effective treatment strategy for LARC.A higher pretreatment NLR(≥3.2)independently predicted worse OS and DFS.Stratification using the NLR in combination with CEA levels may enhance prognostic accuracy for patients undergoing robotic-assisted surgery for LARC.
基金Supported by the National Program on Key Basic Research Project(2020YFA0713600)the National Natural Science Foundation of China(62272214)。
文摘In the era of the Internet of Things,distributed computing alleviates the problem of insufficient terminal computing power by integrating idle resources of heterogeneous devices.However,the imbalance between task execution delay and node energy consumption,and the scheduling and adaptation challenges brought about by device heterogeneity,urgently need to be addressed.To tackle this problem,this paper constructs a multi-objective real-time task scheduling model that considers task real-time performance,execution delay,system energy consumption,and node interests.The model aims to minimize the delay upper bound and total energy consumption while maximizing system satisfaction.A real-time task scheduling algorithm based on bilateral matching game is proposed.By designing a bidirectional preference mechanism between tasks and computing nodes,combined with a multi-round stable matching strategy,accurate matching between tasks and nodes is achieved.Simulation results show that compared with the baseline scheme,the proposed algorithm significantly reduces the total execution cost,effectively balances the task execution delay and the energy consumption of compute nodes,and takes into account the interests of each network compute node.
基金National Natural Science Foundation of China,Grant/Award Number:52104120Hunan Provincial Key Laboratory of Key Technology on Hydropower Development,Grant/Award Number:PKLHD202303。
文摘During geothermal resource exploitation,the potential deterioration of mechanical properties in high-temperature granite subjected to cooling poses a significant safety concern.To address this,the present study investigates the coupled thermo-mechanical behavior of granite during heating and cooling through a combination of laboratory tests and finite difference method analysis.Initial investigations involve X-ray diffraction,thermal expansion test,thermogravimetric analysis,and uniaxial compression test.Results show the significant variations of granite properties under different thermal conditions,attributed to temperature gradients,water evaporation,and mineral phase transitions.Subsequently,a model considering temperature-dependent parameters and real-time cooling rates was employed to simulate linear heating and nonlinear cooling processes.Simulation results indicate that the thermal cracking predominantly occurs during the heating stage,with tensile failure as the primary mode.Additionally,a faster real-time cooling rate at higher temperatures intensifies the thermal cracking behavior in granite.This study effectively elucidates the thermomechanical coupling behavior of granite during heating and cooling processes,providing insights into the mechanisms of mechanical property changes with rising or decreasing temperatures.
基金supported by Jiangxi Polytechnic Institute Key Research Topics in Educational Reform 2025-JGJG-07.
文摘The intelligent environmental sensing systems are quickly transforming the sparse and retrospective monitoring to dense and decision-oriented environmental intelligence.This review brings together the manner in which integration of Internet of Things(IoT)sensing,edge computing,and real-time analytics facilitates timely detection,interpretation,and prediction of the environmental conditions across the applications,such as urban air quality,watershed and coastal surveillance,industrial safety,agriculture,and disaster response.We define end-to-end architectural patterns to organize devices,edge nodes,and cloud services to satisfy latency,reliability,bandwidth,and governance constraints with emphasis on event-time processing,adaptive offloading,and hierarchical aggregation.Then we look at sensing and infrastructure foundations,emphasizing the effects of sensor modality and power autonomy,connectivity,and the practices of calibration on the practicable analytics and eventual plausibility.It is on this basis that we examine real-time analytics pipelines and Artificial Intelligence(AI)techniques to preprocess,sensor combine,anomaly detect,and short-horizon forecast,with a focus on edge-deployable models,quantification of uncertainties,and query resistance to drift and domain shift.Lastly,we address the realities of deployment that condition operational success,such as lifecycle engineering,provenance-aware data management,security and privacy risks,ethical governance,and evaluation methodologies,which place end-to-end latency and field generalization as a priority.This review offers cohesion to algorithmic capabilities and systems engineering and governance to define an overall framework,show open areas of research directions,and provide practical recommendations on how to design trustworthy,scalable,and sustainable environmental monitoring systems.
基金supported by the National Natural Science Foundation of China(Grant No.42077244)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.KYCX24_0434).
文摘To investigate the energy relief effect of real-time drilling in preventing rockburst in high-stress rock,a series of high-stress real-time drilling uniaxial compression tests were conducted on red sandstone specimens using the SG4500 drilling rig.Results showed that the mechanical behavior(i.e.peak strength and rockburst intensity)of the rock was weakened under high-stress real-time drilling and exhibited a downward trend as the drilling diameter increased.The real-time drilling energy dissipation index(ERD)was proposed to characterize the energy relief during high-stress real-time drilling.The ERD exhibited a linear increase with the real-time drilling diameter.Furthermore,the elastic strain energy of post-drilling rock showed a linear relationship with the square of stress across different stress levels,which also applied to the peak elastic strain energy and the square of peak stress.This findingreveals the intrinsic link between the weakening effect of peak elastic strain energy and peak strength due to high-stress real-time drilling,confirmingthe consistency between energy relief and pressure relief effects.By establishing relationships among rockburst proneness,peak elastic strain energy,and peak strength,it was demonstrated that high-stress real-time drilling reduces rockburst proneness through energy dissipation.Specifically,both peak elastic strain energy and rockburst proneness decreased with larger drill bit diameters,consistent with reductions in peak strength,rockburst intensity,and fractal dimensions of high-stress real-time drilled rock.These results validate the energy relief mechanism of real-time drilling in mitigating rockburst risks.
基金support of the National Natural Science Foundation of China(No.52274176)the Guangdong Province Key Areas R&D Program(No.2022B0101070001)+5 种基金Chongqing Elite Innovation and Entrepreneurship Leading talent Project(No.CQYC20220302517)the Chongqing Natural Science Foundation Innovation and Development Joint Fund(No.CSTB2022NSCQ-LZX0079)the National Key Research and Development Program Young Scientists Project(No.2022YFC2905700)the Chongqing Municipal Education Commission“Shuangcheng Economic Circle Construction in Chengdu-Chongqing Area”Science and Technology Innovation Project(No.KJCX2020031)the Fundamental Research Funds for the Central Universities(No.2024CDJGF-009)the Key Project for Technological Innovation and Application Development in Chongqing(No.CSTB2025TIAD-KPX0029).
文摘An innovative real-time monitoring method for surrounding rock damage based on microseismic time-lapse double-difference tomography is proposed for delayed dynamic damage identification and insufficient detection of adverse geological conditions in deep-buried tunnel construction.The installation techniques for microseismic sensors were optimized by mounting sensors at bolt ends which significantly improves signal-to-noise ratio(SNR)and anti-interference capability compared to conventional borehole placement.Subsequently,a 3D wave velocity evolution model that incorporates construction-induced disturbances was established,enabling the first visualization of spatiotemporal variations in surrounding rock wave velocity.It finds significant wave velocity reduction near the tunnel face,with roof and floor damage zones extending 40–50 m;wave velocities approaching undisturbed levels at 15 m ahead of the working face and on the laterally undisturbed side;pronounced spatial asymmetry in wave velocity distribution—values on the left side exceed those on the right,with a clear stress concentration or transition zone located 10–15 m;and systematically lower velocities behind the face than in front,indicating asymmetric rock damage development.These results provide essential theoretical support and practical guidance for optimizing dynamic construction strategies,enabling real-time adjustment of support parameters,and establishing safety early warning systems in deep-buried tunnel engineering.
文摘Online examinations have become a dominant assessment mode,increasing concerns over academic integrity.To address the critical challenge of detecting cheating behaviours,this study proposes a hybrid deep learning approach that combines visual detection and temporal behaviour classification.The methodology utilises object detection models—You Only Look Once(YOLOv12),Faster Region-based Convolutional Neural Network(RCNN),and Single Shot Detector(SSD)MobileNet—integrated with classification models such as Convolutional Neural Networks(CNN),Bidirectional Gated Recurrent Unit(Bi-GRU),and CNN-LSTM(Long Short-Term Memory).Two distinct datasets were used:the Online Exam Proctoring(EOP)dataset from Michigan State University and the School of Computer Science,Duy Tan Unievrsity(SCS-DTU)dataset collected in a controlled classroom setting.A diverse set of cheating behaviours,including book usage,unauthorised interaction,internet access,and mobile phone use,was categorised.Comprehensive experiments evaluated the models based on accuracy,precision,recall,training time,inference speed,and memory usage.We evaluate nine detector-classifier pairings under a unified budget and score them via a calibrated harmonic mean of detection and classification accuracies,enabling deployment-oriented selection under latency and memory constraints.Macro-Precision/Recall/F1 and Receiver Operating Characteristic-Area Under the Curve(ROC-AUC)are reported for the top configurations,revealing consistent advantages of object-centric pipelines for fine-grained cheating cues.The highest overall score is achieved by YOLOv12+CNN(97.15%accuracy),while SSD-MobileNet+CNN provides the best speed-efficiency trade-off for edge devices.This research provides valuable insights into selecting and deploying appropriate deep learning models for maintaining exam integrity under varying resource constraints.
基金supported by the National Natural Science Foundation of China(Grant No.62403486)。
文摘The highly dynamic nature,strong uncertainty,and coupled multiple safety constraints inherent in carrier aircraft recovery operations pose severe challenges for real-time decision-making.Addressing bolter scenarios,this study proposes an intelligent decision-making framework based on a deep long short-term memory Q-network.This framework transforms the real-time sequencing for bolter recovery problem into a partially observable Markov decision process.It employs a stacked long shortterm memory network to accurately capture the long-range temporal dependencies of bolter event chains and fuel consumption.Furthermore,it integrates a prioritized experience replay training mechanism to construct a safe and adaptive scheduling system capable of millisecond-level real-time decision-making.Experimental demonstrates that,within large-scale mass recovery scenarios,the framework achieves zero safety violations in static environments and maintains a fuel safety violation rate below 10%in dynamic scenarios,with single-step decision times at the millisecond level.The model exhibits strong generalization capability,effectively responding to unforeseen emergent situations—such as multiple bolters and fuel emergencies—without requiring retraining.This provides robust support for efficient carrier-based aircraft recovery operations.
文摘A real time concurrent product and process design system for mechanical parts is described in this paper. It consists of integrated product model, the expert system of product manufacturability evaluation and the controller of concurrent design. With the help of the controller of concurrent design, each feature of a part can be designed and evaluated based on manufacturing knowledge and resources, and can be modified according to the results of evaluation. The machining method of design feature can be selected based on manufacturing knowledge. So real time concurrent product and process design can be implemented based on integrated product model that is established based on generalized feature. Products and its design process can be optimized with the help of this system. The information and function integration of product design process can be realized. The time to market and the cost of products can be reduced.
文摘This paper deals with control system design and implementation problems encountered in multiple robot systems. The methodology developed is depicted by a set of coordination mechanisms using hierarchical net structures and their accompanying rules. With the net models, the hierarchical and distributed control system is designed for an assembly task. Synchronization commands allow coordination of the movements of the robots. The net models make concurrency of the movements of the robots transparent to users. The net based machine controller executes robot motion control through the communication with the external robot controller using the command/response concept. Sensory signals indicating the change of state of robots are used to trigger or initiate tasks. Simultaneous movement of the robots is obtained by creating different background threads running in parallel under Windows OS. The multilevel hierarchical control system can be consistently constructed using net models.
基金Supported by the Defense Pre-Research Project ofthe"Tenth Five-Year-Plan"of China (413150403)
文摘Secure real-time databases must simultaneously satisfy two requirements in guaranteeing data security and minimizing the missing deadlines ratio of transactions. However, these two requirements can conflict with each other and achieve one requirement is to sacrifice the other. This paper presents a secure real-time concurrency control protocol based on optimistic method. The concurrency control protocol incorporates security constraints in a real-time optimistic concurrency control protocol and makes a suitable tradeoff between security and real-time requirements by introducing secure influence factor and real-time influence factor. The experimental results show the concurrency control protocol achieves data security without degrading real-time perform ance significantly.
文摘An integrated method for concurrency control in parallel real-time databases has been proposed in this paper. The nested transaction model has been investigated to offer more atomic execution units and finer grained control within in a transaction. Based on the classical nested locking protocol and the speculative concurrency control approach, a two-shadow adaptive concurrency control protocol, which combines the Sacrifice based Optimistic Concurrency Control (OPT-Sacrifice) and High Priority two-phase locking (HP2PL) algorithms together to support both optimistic and pessimistic shadow of each sub-transaction, has been proposed to increase the likelihood of successful timely commitment and to avoid unnecessary replication overload.
基金the financial support of the Natural Science Foundation of Hubei Province,China (Grant No.2022CFB770)。
文摘In the foundry industries,process design has traditionally relied on manuals and complex theoretical calculations.With the advent of 3D design in casting,computer-aided design(CAD)has been applied to integrate the features of casting process,thereby expanding the scope of design options.These technologies use parametric model design techniques for rapid component creation and use databases to access standard process parameters and design specifications.However,3D models are currently still created through inputting or calling parameters,which requires numerous verifications through calculations to ensure the design rationality.This process may be significantly slowed down due to repetitive modifications and extended design time.As a result,there are increasingly urgent demands for a real-time verification mechanism to address this issue.Therefore,this study proposed a novel closed-loop model and software development method that integrated contextual design with real-time verification,dynamically verifying relevant rules for designing 3D casting components.Additionally,the study analyzed three typical closed-loop scenarios of agile design in an independent developed intelligent casting process system.It is believed that foundry industries can potentially benefit from favorably reduced design cycles to yield an enhanced competitive product market.
基金supported by the Science and Technology Development Fund of the Fourth Military Medical University(No.2016XB051)the Military Medical Promotion Plan of the Fourth Military Medical University(No.2016TSA-005)+2 种基金the Science and Technology Program of Guangzhou(No.201604040002)the Youth Development Project of Air Force Medical University(No.21QNPY072)the Xijing Hospital Booster Program(No.XJZT24CZ10).
文摘Autologous bone marrow-derived mesenchymal stem cells(BMSCs)have been shown to promote osteogenesis;however,the effects of allogeneic BMSCs(allo-BMSCs)on bone regeneration remain unclear.Therefore,we explored the bone regeneration promotion effect of allo-BMSCs in 3D-printed autologous bone particle(ABP)scaffolds.First,we concurrently printed scaffolds with polycaprolactone,ABPs,and allo-BMSCs for appropriate support,providing bioactive factors and seed cells to promote osteogenesis.In vitro studies showed that ABP scaffolds promoted allo-BMSC osteogenic differentiation.In vivo studies revealed that the implantation of scaffolds loaded with ABPs and allo-BMSCs into canine skull defects for nine months promoted osteogenesis.Further experiments suggested that only a small portion of implanted allo-BMSCs survived and differentiated into vascular endothelial cells,chondrocytes,and osteocytes.The implanted allo-BMSCs released stromal cell-derived factor 1 through paracrine signaling to recruit native BMSCs into the defect,promoting bone regeneration.This study contributes to our understanding of allo-BMSCs,providing information relevant to their future application.
基金support of the Natural Science Foundation of Jiangsu Province,China(BK20240977)the China Scholarship Council(201606850024)+1 种基金the National High Technology Research and Development Program of China(2016YFD0701003)the Postgraduate Research&Practice Innovation Program of Jiangsu Province,China(SJCX23_1488)。
文摘Deep learning-based intelligent recognition algorithms are increasingly recognized for their potential to address the labor-intensive challenge of manual pest detection.However,their deployment on mobile devices has been constrained by high computational demands.Here,we developed GBiDC-PEST,a mobile application that incorporates an improved,lightweight detection algorithm based on the You Only Look Once(YOLO)series singlestage architecture,for real-time detection of four tiny pests(wheat mites,sugarcane aphids,wheat aphids,and rice planthoppers).GBiDC-PEST incorporates several innovative modules,including GhostNet for lightweight feature extraction and architecture optimization by reconstructing the backbone,the bi-directional feature pyramid network(BiFPN)for enhanced multiscale feature fusion,depthwise convolution(DWConv)layers to reduce computational load,and the convolutional block attention module(CBAM)to enable precise feature focus.The newly developed GBiDC-PEST was trained and validated using a multitarget agricultural tiny pest dataset(Tpest-3960)that covered various field environments.GBiDC-PEST(2.8 MB)significantly reduced the model size to only 20%of the original model size,offering a smaller size than the YOLO series(v5-v10),higher detection accuracy than YOLOv10n and v10s,and faster detection speed than v8s,v9c,v10m and v10b.In Android deployment experiments,GBiDCPEST demonstrated enhanced performance in detecting pests against complex backgrounds,and the accuracy for wheat mites and rice planthoppers was improved by 4.5-7.5%compared with the original model.The GBiDC-PEST optimization algorithm and its mobile deployment proposed in this study offer a robust technical framework for the rapid,onsite identification and localization of tiny pests.This advancement provides valuable insights for effective pest monitoring,counting,and control in various agricultural settings.
文摘Large portions of the tunnel boring machine(TBM)construction cost are attributed to disc cutter consumption,and assessing the disc cutter's wear level can help determine the optimal time to replace the disc cutter.Therefore,the need to monitor disc cutter wear in real-time has emerged as a technical challenge for TBMs.In this study,real-time disc cutter wear monitoring is developed based on sound and vibration sensors.For this purpose,the microphone and accelerometer were used to record the sound and vibration signals of cutting three different types of rocks with varying abrasions on a laboratory scale.The relationship between disc cutter wear and the sound and vibration signal was determined by comparing the measurements of disc cutter wear with the signal plots for each sample.The features extracted from the signals showed that the sound and vibration signals are impacted by the progression of disc wear during the rock-cutting process.The signal features obtained from the rock-cutting operation were utilized to verify the machine learning techniques.The results showed that the multilayer perceptron(MLP),random subspace-based decision tree(RS-DT),DT,and random forest(RF)methods could predict the wear level of the disc cutter with an accuracy of 0.89,0.951,0.951,and 0.927,respectively.Based on the accuracy of the models and the confusion matrix,it was found that the RS-DT model has the best estimate for predicting the level of disc wear.This research has developed a method that can potentially determine when to replace a tool and assess disc wear in real-time.
文摘In parallel real-time database systems, concurrency control protocols must satisfy time constraints as well as the integrity constraints. The authors present a validation concurrency control(VCC) protocol, which can enhance the performance of real-time concurrency control mechanism by reducing the number of transactions that might miss their deadlines, and compare the performance of validation concurrency control protocol with that of HP2PL(High priority two phase locking) protocol and OCC-TI-WAIT-50(Optimistic concurrency control-time interval-wait-50) protocol under shared-disk architecture by simulation. The simulation results reveal that the protocol the author presented can effectively reduce the number of transactions restarting which might miss their deadlines and performs better than HP2PL and OCC-TI-WAIT-50. It works well when arrival rate of transaction is lesser than threshold. However, due to resource contention the percentage of missing deadline increases sharply when arrival rate is greater than the threshold.
