Aiming at the problems of low reliability and complex operation of traditional coin-tap test of composite material,this paper introduces the grey system theory and achieves better performance.The response signals of c...Aiming at the problems of low reliability and complex operation of traditional coin-tap test of composite material,this paper introduces the grey system theory and achieves better performance.The response signals of coin-tap are classified through the grey clustering based on relation analysis,and corresponding improvements are made to the calculation method of the relation degree of nearness.First,the time history of acceleration is taken as the system behavior sequence.The improved correlation calculation method is used to solve the relation degree of nearness between the sequences,and the matrix of degree of grey relation is constructed based on this.Then,the sequence groups are summarized through the matrix,and the response signals of coin-tap are qualitatively classified according to the location of the reference sequence.Finally,the defect detection of composite materials is completed without pre-testing.The test results show that the accuracy of the coin-tap test based on improved grey clustering reaches 100%,which simplifies the operation steps while ensuring the reliability of the coin-tap test results.展开更多
Robustness testing for safety-critical embedded software is still a challenge in its nascent stages. In this paper, we propose a practical methodology and implement an environment by employing model-based robustness t...Robustness testing for safety-critical embedded software is still a challenge in its nascent stages. In this paper, we propose a practical methodology and implement an environment by employing model-based robustness testing for embedded software systems. It is a system-level black-box testing approach in which the fault behaviors of embedded software is triggered with the aid of modelbased fault injection by the support of an executable model-driven hardware-in-loop （HIL） testing environment. The prototype implementation of the robustness testing environment based on the proposed approach is experimentally discussed and illustrated by industrial case studies based on several avionics-embedded software systems. The results show that our proposed and implemented robustness testing method and environment are effective to find more bugs, and reduce burdens of testing engineers to enhance efficiency of testing tasks, especially for testing complex embedded systems.展开更多
Unified modeling language （UML） is a powerful graphical modeling language with intuitional meaning. It provides various diagrams to depict system characteristics and complex environment from different viewpoints and...Unified modeling language （UML） is a powerful graphical modeling language with intuitional meaning. It provides various diagrams to depict system characteristics and complex environment from different viewpoints and different application layers. UML-based software development and modeling environments have been widely accepted in industry, including areas in which safety is an important issue such as spaceflight, defense, automobile, etc. To ensure and improve software quality becomes a main concern in the field. As one of the key techniques for software quality, software testing can effectively detect system faults. UML based software testing based is an important research direction in software engineering. The key to software testing is the generation of test cases. This dissertation studies an approach to generating test cases from UML statecharts.展开更多
The tarnishing test in the presence of hydrogen sulfide（H2S） vapors has been used to investigate the tarnish resistance capability of copper-based alloys coated with Si02-like films by means of plasma-enhanced chemi...The tarnishing test in the presence of hydrogen sulfide（H2S） vapors has been used to investigate the tarnish resistance capability of copper-based alloys coated with Si02-like films by means of plasma-enhanced chemical vapor deposition（PECVD） fed with a tetraethoxysilane/oxygen mixture.The chemical and morphological properties of the films have been characterized by using infrared absorption spectroscopy（IR） and scanning electron microscopy（SEM）with energy disperse spectroscopy（EDS）.The corrosion products of the samples after the tarnishing test have been identified by X-ray diffraction analysis（XRD）.It has been found that SiO2-like films formed via PECVD with a high O2 flow rate could protect copper-based alloys from H2S vapor tarnishing.The alloys coated at the O2 flow rate of 20 sccm remain uncorroded after 54days of H2S vapor tarnish testing.The corrosion products for the alloys deposited at a low O2flow rate after 54 days of tarnish testing are mainly composed of brochantite.展开更多
Globally, traditional power systems are rapidly transforming towards the adoption of smart grid platforms. Substations which are at the center of the electric power transformation from the power plant are changing to ...Globally, traditional power systems are rapidly transforming towards the adoption of smart grid platforms. Substations which are at the center of the electric power transformation from the power plant are changing to IEC 61850 based digital substations. Therefore, within substation, there is a growing demand for the IEC 61850 based Intelligent Electronic Devices (IEDs). The operation of multiple manufacturers of IEDs in a single digital substation network increases the need for IEC 61850 communications specification conformance diagnosis to ensure interoperability for efficient data exchange between IEDs. The IEC 61850-10 presents test items for diagnosing communication specification conformance. There are many test tools available in the market today to test the compliance of the IEC 61850 communications specifications to the IED. In this paper, we propose a model-based diagnostic method for IED communication conformance testing. The proposed model-based software therefore uses the “drag and drop” technique to select the various IEC 61850 communication services (objects) required to design the test case in a user friendly Graphical User Interface (GUI). This makes the service conformance testing more flexible for test engineers and system integrators especially in situations that require test case modifications. Also, the proposed software tool makes it easy to understand the various IEC 61850 services using the friendly GUI.展开更多
In a component-based software development life cycle, selection of preexisting components is an important task. Every component that has to be reused has an associated risk of failure of not meeting the functional and...In a component-based software development life cycle, selection of preexisting components is an important task. Every component that has to be reused has an associated risk of failure of not meeting the functional and non-functional requirements. A component's failure would lead a developer to look for some other alternative of combinations of COTS, in-house and engineered components among possible candidate combinations. This means design itself can readily change. The very process of design of a software system and component selection seems to be heavily dependent on testing results. Instability of design, further, becomes more severe due to requirements change requests. Therefore, this instability of design has to be essentially mitigated by using proper design and testing approaches, otherwise, it may lead to exorbitantly high testing cost due to the repeated testing of various alternatives. How these three activities: Component-based software design, component selection and component-based software testing are interrelated? What process model is most suited to address this concern? This work explores the above questions and their implication in terms of nature of a process model that can be convincing in case of component-based software development.展开更多
In this paper,a novel component based framework of test system is presented for the new requirements of dynamic changes of test functions and reconfiguration of test resources.The complexity of dynamic reconfiguration...In this paper,a novel component based framework of test system is presented for the new requirements of dynamic changes of test functions and reconfiguration of test resources.The complexity of dynamic reconfiguration arises from the scale, redirection,extensibility and interconnection of components in test system.The paper is started by discussing the component assem- bly based framework which provide the open platform to the deploy of companents and then the script interpreter model is introduced to dynamically create the components and build the test system by analyzing XML based information of test system.A pipeline mod- el is presented to provide the data channels and behavior reflection among the components.Finally,a dynamic reconfigurable test system is implemented on the basis of COM and applied in the remote test and control system of CNC machine.展开更多
Studies on Soil Test Crop Response Based Integrated Plant Nutrition System(STCR-IPNS)were conducted for three years adopting the Inductive cum Targeted Yield Model,on alfisols of Unified Andhra Pradesh,Southern India ...Studies on Soil Test Crop Response Based Integrated Plant Nutrition System(STCR-IPNS)were conducted for three years adopting the Inductive cum Targeted Yield Model,on alfisols of Unified Andhra Pradesh,Southern India during summer 2016-2018 in order to develop fertilizer prescriptions through IPNS for the desired yield targets of Sesamum under field conditions.The bases for making the fertilizer prescriptions viz.nutrient requirement(NR),contribution of nutrients from soil(Cs),fertilizer(Cf)and vermicompost(CVC)were computed using the field experimental data.Making use of these basic parameters,the fertilizer prescription equations were developed under NPK alone and under IPNS for the desired yield targets of Sesamum for a range of soil test values.The quantity of fertilizers contributed by the application of vermicompost was assessed.Nutrient requirement to produce 100 kg of sesame seed was worked out to be 10.20 kg N,3.90 kg P2O5 and 5.22 kg K2O.In the present investigation,the requirement of N was higher which is followed by K2O and P2O5.The requirement of N was 2.62 times higher than P and 1.95 times higher than K.The percent contribution of N,P and K was 12.25,15.75 and 6.00 from soils,41.68,22.85 and 59.97 from fertilizer and 9.87,6.74 and 18.65 from organic manures,respectively.Thus the Inductive cum Targeted Yield Model used to develop fertilizer prescription equations provides a strong basis for soil fertility maintenance consistent with high productivity and efficient nutrient management in farming for sustainable and enduring agriculture.展开更多
Quality of software systems is highly demanded in today’s scenario. Highly testable system enhances the reliability also. More than 50% of test effort-time and cost are used to produce a highly testable system. Thus,...Quality of software systems is highly demanded in today’s scenario. Highly testable system enhances the reliability also. More than 50% of test effort-time and cost are used to produce a highly testable system. Thus, design-for-testability is needed to reduce the test effort. In order to enhance the quality, productivity and reduced cost of the software organizations are promoting to produce the reuse-oriented products. Incorporating reuse technology in both aspects-software development process and test process may payoff many folds. Keeping this view, our study focus the testability of the object-oriented framework based software systems and identify that flexibility at the variable points of the object-oriented framework, chosen for framework instantiation, greatly affects the testability of object-oriented framework based software at each level of testing. In the current paper, we propose a testability model considering the flexible aspect of the variable point to estimate testability in the early phase, requirement analysis phase, of development process of the framework based software. The proposed model helps to improve the testability of the software before the implementation starts thus reducing the overall development cost.展开更多
The essay aims at revealing the washback effect of task-based communicative language test(TBCLT) in a vocational college, with the further purpose to work out some ways to promote positive washback effect and reform t...The essay aims at revealing the washback effect of task-based communicative language test(TBCLT) in a vocational college, with the further purpose to work out some ways to promote positive washback effect and reform the current tests hence to improve vocational learning.展开更多
The present study aims at revealing the washback effect of task-based communicative language test(TBCLT) in a vo cational college, with the further purpose to work out some ways to promote positive washback effect and...The present study aims at revealing the washback effect of task-based communicative language test(TBCLT) in a vo cational college, with the further purpose to work out some ways to promote positive washback effect and reform the current tests hence to improve vocational teaching.展开更多
Parallel key-insulation allows the use of multiple helper keys to protect private decryption keys during secret decryption key updates. This approach prevents decryption key leakage or exposure in insecure environment...Parallel key-insulation allows the use of multiple helper keys to protect private decryption keys during secret decryption key updates. This approach prevents decryption key leakage or exposure in insecure environment. We combined parallel key-insulated encryption (PKIE) with multiple helper keys and identity-based encryption with the equality test (IBE-ET) to obtain parallel key insulated ID-based public key encryption with outsourced equivalent test (PKI-IBPKE-ET). The scheme inherits the advantages of identity-based encryption (IBE), which simplifies certificate management for public key encryption. Furthermore, the parallel key-insulation with multiple helper mechanism was introduced in our scheme, which perfectly reduced the possibility of helper key exposure. Our scheme will enable the protection and periodic update of decryption keys in insecure environment. Our scheme achieves a weak indistinguishable identity chosen ciphertext (W-IND-ID-CCA) security in the random oracle model. Ultimately, it is observed that our scheme is feasible and practical through the experimental simulation and theoretical analysis.展开更多
In 5G systems, massive multiple-input multiple-output (MIMO) has been adopted in base stations (BSs) to improve spectral efficiency and coverage. The traditional conductive performance test techniques are challenging ...In 5G systems, massive multiple-input multiple-output (MIMO) has been adopted in base stations (BSs) to improve spectral efficiency and coverage. The traditional conductive performance test techniques are challenging due to the unaffordable cost and high complexity when testing a large number of antennas. To solve this problem, the over-the-air (OTA) test has been presented, in which probe selection is the key to reduce the number of channel emulators and probes. In this paper, a novel artificial bee colony (ABC) algorithm is introduced to enhance the efficiency and accuracy of probe selection procedure. A sectoring- based multi-probe anechoic chamber (MPAC) is built to evaluate the throughput performance of massive MIMO equipped in 5G BS. In addition, link level simulation is carried out to evaluate the proposal’s performance gain under the commercial network assumptions, where the average throughput of three velocity is given with different SNR region. The results suggest that OTA chamber and multi-probe wall are available not only for 5G BSs, but also for user equipments (UEs) with end-to-end communication.展开更多
In this work,the microstructure,failure behavior and interfacial properties with respective to the interfacial domain in SiCf/BN/SiC and C_(f)/PyC/SiC composites were studied via the fiber push-in test.The differences...In this work,the microstructure,failure behavior and interfacial properties with respective to the interfacial domain in SiCf/BN/SiC and C_(f)/PyC/SiC composites were studied via the fiber push-in test.The differences in the mechanical response of the interfacial domain were observed.During the fiber push-in test for SiCf/BN/SiC,the interface debonding accompanied with interphase fracture occurred,resulting in an obvious sign of the onset of debonding on loading-displacement(P-u)curves.While the good continuity of P-u curves can be observed for Cf/PyC/SiC,which is due to that the failure is in the form of interface debonding along with interphase lateral slipping caused by the extension of buckled carbon fiber,without any interphase fracture.The interfacial properties calculated from the fiber push-in test show that Cf/PyC/SiC possesses a weaker interfacial domain compared with SiC_(f)/BN/SiC.The interfacial shear stress of SiCf/BN/SiC and C_(f)/PyC/SiC composites amounts 94.2 and 48.1 MPa,respectively.展开更多
The corrosion resistance of the Al2O3-C based refractories in melts containing titania has been studied by quasi-station immersion and rotary immersion. The corrosionrate is decreased with the addition of graphite car...The corrosion resistance of the Al2O3-C based refractories in melts containing titania has been studied by quasi-station immersion and rotary immersion. The corrosionrate is decreased with the addition of graphite carbon, and ZrO2 in the refractories . The corrosion, mechanism of Al2O3-C refractories, is. the oxidization of graphite carbon by the oxides of the melts the formation of deteriorate layer, For the Al2O3-C-ZrO2 refractories, the corrosion behavior is due to the, interaction between melts and refractories . The new compounds of FeO. SiO2, SiZrO4, FeO. 3 CaO, 2CaO. SiO2 and CaO. SiO2 are formed in the deteriorate layer.展开更多
Investigation of seismic performance of buildings with STRP （scrap tire rubber pad） seismic isolators by means of pseudo-dynamic tests and numerical simulation is presented. The isolated building is numerically mode...Investigation of seismic performance of buildings with STRP （scrap tire rubber pad） seismic isolators by means of pseudo-dynamic tests and numerical simulation is presented. The isolated building is numerically modeled, while the base isolation layer is considered as the experimental substructure in the pseudo-dynamic tests. The test result verifies that the STRP isolator shows acceptable shear deformation performance predicted by the design methods, and demonstrated that seismic isolation using STRP works as a protective measure to provide enhanced seismic performance of the building indicated by the reduction of top floor absolute acceleration, drift and base shear as designated.展开更多
Guwahati, the major city in the North Eastern region of India is growing rapidly in every aspect with major infrastructures like sports complex, educational institutions, hospitals, flyovers, multiplex halls, etc. Kno...Guwahati, the major city in the North Eastern region of India is growing rapidly in every aspect with major infrastructures like sports complex, educational institutions, hospitals, flyovers, multiplex halls, etc. Knowledge of the subsurface soil condition is necessary to ensure the structural safety and serviceability of the above mentioned structures before any construction. Therefore, contour maps of Standard penetration test N value, ground water table and shear wave velocity map using Geographical Information System (GIS) platform will be of great help to the foundation designers at the initial stage for site selection and preliminary foundation design under static and seismic condition. Contour maps of Standard penetration test N value at different depth and average contour map of N value of Guwahati city have been prepared. Standard penetration Test N values and depth of water table were taken from a data base of 200 boreholes up to 30 meter depth to prepare N value contour map of Guwahati city. A regression equation between shear wave velocity V<sub>s</sub> and Standard penetration test N value based on twenty seven previous similar correlations was also developed. This regression equation was used to determine shear wave velocity of Guwahati city. The average shear wave velocities for 30 m depth for all locations had been determined and used to generate map on (GIS) platform. Other subsurface geotechnical information of Guwahati city like soil classification and depth to water level from ground surface is also presented in the form of GIS based maps in order to form a data base.展开更多
The microstructural evolution of a Ni-based superalloy under interrupted hot compressive deformation with different cooling rates in the inter-pass stage is investigated. It is found that metadynamic recrystallization...The microstructural evolution of a Ni-based superalloy under interrupted hot compressive deformation with different cooling rates in the inter-pass stage is investigated. It is found that metadynamic recrystallization(MDRX) in the inter-pass stage is more sensitive to the accumulated strain than the deformation temperature which is above the recrystallization temperature. The variations of both the grain distribution and the texture intensity caused by MDRX during the interpass stage result in variations of the yield stress(YS) and the work hardening(WH) rate in each stage. Results also show that the MDRX process in the inter-pass stage has a considerable influence on the final microstructure of three-pass compression. The final grain distribution is more uniform,and the compression texture gradually transforms into recrystallization texture with an increasing degree of MDRX. In order to predict the MDRX fraction in the inter-pass cooling stage, a modified kinetic equation is established, which can reasonably predict the MDRX behavior under multi-pass compression with different conditions in the inter-pass stage. Meanwhile, the influence of the interpass cooling stage on the mechanism of dynamic recrystallization(DRX) is studied. It is universally acknowledged that the discontinuous dynamic recrystallization(DDRX) process is the major deformation mechanism for the Ni-based superalloy. However, the continuous dynamic recrystallization(CDRX) process is promoted in the compression stage with a decrease of the cooling rate in each inter-pass stage.展开更多
Now the optimization strategies for power distribution are researched widely, and most of them are aiming to the optimal fuel economy and the driving cycle must be preknown. Thus if the actual driving condition deviat...Now the optimization strategies for power distribution are researched widely, and most of them are aiming to the optimal fuel economy and the driving cycle must be preknown. Thus if the actual driving condition deviates from the scheduled driving cycle, the effect of optimal results will be declined greatly. Therefore, the instantaneous optimization strategy carried out on-line is studied in this paper. The power split path and the transmission efficiency are analyzed based on a special power-split scheme and the efficiency models of the power transmitting components are established. The synthetical efficiency optimization model is established for enhancing the transmission efficiency and the fuel economy. The identification of the synthetical efficiency as the optimization objective and the constrain group are discussed emphatically. The optimization is calculated by the adaptive simulated annealing （ASA） algorithm and realized on-line by the radial basis function （RBF）-based similar models. The optimization for power distribution of the hybrid vehicle in an actual driving condition is carried out and the road test results are presented. The test results indicate that the synthetical efficiency optimization method can enhance the transmission efficiency and the fuel economy of the power-split hybrid electric vehicle （HEV） observably. Compared to the rules-based strategy the optimization strategy is optimal and achieves the approximate global optimization solution for the power distribution. The synthetical efficiency optimization solved by ASA algorithm can give attentions to both optimization quality and calculation efficiency, thus it has good application foreground for the power distribution of power-split HEV.展开更多
The software defects are managed through the knowledge base,and defect management is upgraded from the data level to the knowledge level. The rule knowledge is mined from bug data based on a rule-based knowledge extra...The software defects are managed through the knowledge base,and defect management is upgraded from the data level to the knowledge level. The rule knowledge is mined from bug data based on a rule-based knowledge extraction model,and the appropriate strategy is configured in the strategy layer to predict software defects. The model is extracted by direct association rules and extended association rules,which improve the prediction rate of related defects and the efficiency of software testing.展开更多
基金National Key Research and Development Project of China(No.2018YFB1701200)。
文摘Aiming at the problems of low reliability and complex operation of traditional coin-tap test of composite material,this paper introduces the grey system theory and achieves better performance.The response signals of coin-tap are classified through the grey clustering based on relation analysis,and corresponding improvements are made to the calculation method of the relation degree of nearness.First,the time history of acceleration is taken as the system behavior sequence.The improved correlation calculation method is used to solve the relation degree of nearness between the sequences,and the matrix of degree of grey relation is constructed based on this.Then,the sequence groups are summarized through the matrix,and the response signals of coin-tap are qualitatively classified according to the location of the reference sequence.Finally,the defect detection of composite materials is completed without pre-testing.The test results show that the accuracy of the coin-tap test based on improved grey clustering reaches 100%,which simplifies the operation steps while ensuring the reliability of the coin-tap test results.
基金the Aeronautics Science Foundation of China(No.2011ZD51055)Science and Technology on Reliability&Environmental Engineering Laboratory(No.302367)the National Pre-Research Foundation of China(No.51319080201)
文摘Robustness testing for safety-critical embedded software is still a challenge in its nascent stages. In this paper, we propose a practical methodology and implement an environment by employing model-based robustness testing for embedded software systems. It is a system-level black-box testing approach in which the fault behaviors of embedded software is triggered with the aid of modelbased fault injection by the support of an executable model-driven hardware-in-loop （HIL） testing environment. The prototype implementation of the robustness testing environment based on the proposed approach is experimentally discussed and illustrated by industrial case studies based on several avionics-embedded software systems. The results show that our proposed and implemented robustness testing method and environment are effective to find more bugs, and reduce burdens of testing engineers to enhance efficiency of testing tasks, especially for testing complex embedded systems.
文摘Unified modeling language （UML） is a powerful graphical modeling language with intuitional meaning. It provides various diagrams to depict system characteristics and complex environment from different viewpoints and different application layers. UML-based software development and modeling environments have been widely accepted in industry, including areas in which safety is an important issue such as spaceflight, defense, automobile, etc. To ensure and improve software quality becomes a main concern in the field. As one of the key techniques for software quality, software testing can effectively detect system faults. UML based software testing based is an important research direction in software engineering. The key to software testing is the generation of test cases. This dissertation studies an approach to generating test cases from UML statecharts.
基金supported by the Special Fund for Talent of Wuhan Institute of Technology,China(No.237127)the"Fellowship for Junior Researchers"from Politecnico di Torino and Regione Piemonte,Italy
文摘The tarnishing test in the presence of hydrogen sulfide（H2S） vapors has been used to investigate the tarnish resistance capability of copper-based alloys coated with Si02-like films by means of plasma-enhanced chemical vapor deposition（PECVD） fed with a tetraethoxysilane/oxygen mixture.The chemical and morphological properties of the films have been characterized by using infrared absorption spectroscopy（IR） and scanning electron microscopy（SEM）with energy disperse spectroscopy（EDS）.The corrosion products of the samples after the tarnishing test have been identified by X-ray diffraction analysis（XRD）.It has been found that SiO2-like films formed via PECVD with a high O2 flow rate could protect copper-based alloys from H2S vapor tarnishing.The alloys coated at the O2 flow rate of 20 sccm remain uncorroded after 54days of H2S vapor tarnish testing.The corrosion products for the alloys deposited at a low O2flow rate after 54 days of tarnish testing are mainly composed of brochantite.
文摘Globally, traditional power systems are rapidly transforming towards the adoption of smart grid platforms. Substations which are at the center of the electric power transformation from the power plant are changing to IEC 61850 based digital substations. Therefore, within substation, there is a growing demand for the IEC 61850 based Intelligent Electronic Devices (IEDs). The operation of multiple manufacturers of IEDs in a single digital substation network increases the need for IEC 61850 communications specification conformance diagnosis to ensure interoperability for efficient data exchange between IEDs. The IEC 61850-10 presents test items for diagnosing communication specification conformance. There are many test tools available in the market today to test the compliance of the IEC 61850 communications specifications to the IED. In this paper, we propose a model-based diagnostic method for IED communication conformance testing. The proposed model-based software therefore uses the “drag and drop” technique to select the various IEC 61850 communication services (objects) required to design the test case in a user friendly Graphical User Interface (GUI). This makes the service conformance testing more flexible for test engineers and system integrators especially in situations that require test case modifications. Also, the proposed software tool makes it easy to understand the various IEC 61850 services using the friendly GUI.
文摘In a component-based software development life cycle, selection of preexisting components is an important task. Every component that has to be reused has an associated risk of failure of not meeting the functional and non-functional requirements. A component's failure would lead a developer to look for some other alternative of combinations of COTS, in-house and engineered components among possible candidate combinations. This means design itself can readily change. The very process of design of a software system and component selection seems to be heavily dependent on testing results. Instability of design, further, becomes more severe due to requirements change requests. Therefore, this instability of design has to be essentially mitigated by using proper design and testing approaches, otherwise, it may lead to exorbitantly high testing cost due to the repeated testing of various alternatives. How these three activities: Component-based software design, component selection and component-based software testing are interrelated? What process model is most suited to address this concern? This work explores the above questions and their implication in terms of nature of a process model that can be convincing in case of component-based software development.
基金Supported by the National Science Foundation of China(Grant No.50275061)the National High Technology Research and Development Program(Grant No.2001AA423230).
文摘In this paper,a novel component based framework of test system is presented for the new requirements of dynamic changes of test functions and reconfiguration of test resources.The complexity of dynamic reconfiguration arises from the scale, redirection,extensibility and interconnection of components in test system.The paper is started by discussing the component assem- bly based framework which provide the open platform to the deploy of companents and then the script interpreter model is introduced to dynamically create the components and build the test system by analyzing XML based information of test system.A pipeline mod- el is presented to provide the data channels and behavior reflection among the components.Finally,a dynamic reconfigurable test system is implemented on the basis of COM and applied in the remote test and control system of CNC machine.
基金This work was carried out under part of AICRP on Soil Test Crop Response,ICAR at PJTSAU,Hyderabad-500030,India.
文摘Studies on Soil Test Crop Response Based Integrated Plant Nutrition System(STCR-IPNS)were conducted for three years adopting the Inductive cum Targeted Yield Model,on alfisols of Unified Andhra Pradesh,Southern India during summer 2016-2018 in order to develop fertilizer prescriptions through IPNS for the desired yield targets of Sesamum under field conditions.The bases for making the fertilizer prescriptions viz.nutrient requirement(NR),contribution of nutrients from soil(Cs),fertilizer(Cf)and vermicompost(CVC)were computed using the field experimental data.Making use of these basic parameters,the fertilizer prescription equations were developed under NPK alone and under IPNS for the desired yield targets of Sesamum for a range of soil test values.The quantity of fertilizers contributed by the application of vermicompost was assessed.Nutrient requirement to produce 100 kg of sesame seed was worked out to be 10.20 kg N,3.90 kg P2O5 and 5.22 kg K2O.In the present investigation,the requirement of N was higher which is followed by K2O and P2O5.The requirement of N was 2.62 times higher than P and 1.95 times higher than K.The percent contribution of N,P and K was 12.25,15.75 and 6.00 from soils,41.68,22.85 and 59.97 from fertilizer and 9.87,6.74 and 18.65 from organic manures,respectively.Thus the Inductive cum Targeted Yield Model used to develop fertilizer prescription equations provides a strong basis for soil fertility maintenance consistent with high productivity and efficient nutrient management in farming for sustainable and enduring agriculture.
文摘Quality of software systems is highly demanded in today’s scenario. Highly testable system enhances the reliability also. More than 50% of test effort-time and cost are used to produce a highly testable system. Thus, design-for-testability is needed to reduce the test effort. In order to enhance the quality, productivity and reduced cost of the software organizations are promoting to produce the reuse-oriented products. Incorporating reuse technology in both aspects-software development process and test process may payoff many folds. Keeping this view, our study focus the testability of the object-oriented framework based software systems and identify that flexibility at the variable points of the object-oriented framework, chosen for framework instantiation, greatly affects the testability of object-oriented framework based software at each level of testing. In the current paper, we propose a testability model considering the flexible aspect of the variable point to estimate testability in the early phase, requirement analysis phase, of development process of the framework based software. The proposed model helps to improve the testability of the software before the implementation starts thus reducing the overall development cost.
文摘The essay aims at revealing the washback effect of task-based communicative language test(TBCLT) in a vocational college, with the further purpose to work out some ways to promote positive washback effect and reform the current tests hence to improve vocational learning.
文摘The present study aims at revealing the washback effect of task-based communicative language test(TBCLT) in a vo cational college, with the further purpose to work out some ways to promote positive washback effect and reform the current tests hence to improve vocational teaching.
文摘Parallel key-insulation allows the use of multiple helper keys to protect private decryption keys during secret decryption key updates. This approach prevents decryption key leakage or exposure in insecure environment. We combined parallel key-insulated encryption (PKIE) with multiple helper keys and identity-based encryption with the equality test (IBE-ET) to obtain parallel key insulated ID-based public key encryption with outsourced equivalent test (PKI-IBPKE-ET). The scheme inherits the advantages of identity-based encryption (IBE), which simplifies certificate management for public key encryption. Furthermore, the parallel key-insulation with multiple helper mechanism was introduced in our scheme, which perfectly reduced the possibility of helper key exposure. Our scheme will enable the protection and periodic update of decryption keys in insecure environment. Our scheme achieves a weak indistinguishable identity chosen ciphertext (W-IND-ID-CCA) security in the random oracle model. Ultimately, it is observed that our scheme is feasible and practical through the experimental simulation and theoretical analysis.
基金supported by the State Major Science and Technology Special Projects under Grant No. 2018ZX03001028-003
文摘In 5G systems, massive multiple-input multiple-output (MIMO) has been adopted in base stations (BSs) to improve spectral efficiency and coverage. The traditional conductive performance test techniques are challenging due to the unaffordable cost and high complexity when testing a large number of antennas. To solve this problem, the over-the-air (OTA) test has been presented, in which probe selection is the key to reduce the number of channel emulators and probes. In this paper, a novel artificial bee colony (ABC) algorithm is introduced to enhance the efficiency and accuracy of probe selection procedure. A sectoring- based multi-probe anechoic chamber (MPAC) is built to evaluate the throughput performance of massive MIMO equipped in 5G BS. In addition, link level simulation is carried out to evaluate the proposal’s performance gain under the commercial network assumptions, where the average throughput of three velocity is given with different SNR region. The results suggest that OTA chamber and multi-probe wall are available not only for 5G BSs, but also for user equipments (UEs) with end-to-end communication.
基金the support of IMDEA Materials Institute of Spainsupported by the National Natural Science Foundation of China(Project Nos.52072303 and 51821091)。
文摘In this work,the microstructure,failure behavior and interfacial properties with respective to the interfacial domain in SiCf/BN/SiC and C_(f)/PyC/SiC composites were studied via the fiber push-in test.The differences in the mechanical response of the interfacial domain were observed.During the fiber push-in test for SiCf/BN/SiC,the interface debonding accompanied with interphase fracture occurred,resulting in an obvious sign of the onset of debonding on loading-displacement(P-u)curves.While the good continuity of P-u curves can be observed for Cf/PyC/SiC,which is due to that the failure is in the form of interface debonding along with interphase lateral slipping caused by the extension of buckled carbon fiber,without any interphase fracture.The interfacial properties calculated from the fiber push-in test show that Cf/PyC/SiC possesses a weaker interfacial domain compared with SiC_(f)/BN/SiC.The interfacial shear stress of SiCf/BN/SiC and C_(f)/PyC/SiC composites amounts 94.2 and 48.1 MPa,respectively.
基金This work is supported by the National Natural Science Foundation of China Education Ministry of China
文摘The corrosion resistance of the Al2O3-C based refractories in melts containing titania has been studied by quasi-station immersion and rotary immersion. The corrosionrate is decreased with the addition of graphite carbon, and ZrO2 in the refractories . The corrosion, mechanism of Al2O3-C refractories, is. the oxidization of graphite carbon by the oxides of the melts the formation of deteriorate layer, For the Al2O3-C-ZrO2 refractories, the corrosion behavior is due to the, interaction between melts and refractories . The new compounds of FeO. SiO2, SiZrO4, FeO. 3 CaO, 2CaO. SiO2 and CaO. SiO2 are formed in the deteriorate layer.
文摘Investigation of seismic performance of buildings with STRP （scrap tire rubber pad） seismic isolators by means of pseudo-dynamic tests and numerical simulation is presented. The isolated building is numerically modeled, while the base isolation layer is considered as the experimental substructure in the pseudo-dynamic tests. The test result verifies that the STRP isolator shows acceptable shear deformation performance predicted by the design methods, and demonstrated that seismic isolation using STRP works as a protective measure to provide enhanced seismic performance of the building indicated by the reduction of top floor absolute acceleration, drift and base shear as designated.
文摘Guwahati, the major city in the North Eastern region of India is growing rapidly in every aspect with major infrastructures like sports complex, educational institutions, hospitals, flyovers, multiplex halls, etc. Knowledge of the subsurface soil condition is necessary to ensure the structural safety and serviceability of the above mentioned structures before any construction. Therefore, contour maps of Standard penetration test N value, ground water table and shear wave velocity map using Geographical Information System (GIS) platform will be of great help to the foundation designers at the initial stage for site selection and preliminary foundation design under static and seismic condition. Contour maps of Standard penetration test N value at different depth and average contour map of N value of Guwahati city have been prepared. Standard penetration Test N values and depth of water table were taken from a data base of 200 boreholes up to 30 meter depth to prepare N value contour map of Guwahati city. A regression equation between shear wave velocity V<sub>s</sub> and Standard penetration test N value based on twenty seven previous similar correlations was also developed. This regression equation was used to determine shear wave velocity of Guwahati city. The average shear wave velocities for 30 m depth for all locations had been determined and used to generate map on (GIS) platform. Other subsurface geotechnical information of Guwahati city like soil classification and depth to water level from ground surface is also presented in the form of GIS based maps in order to form a data base.
基金supports from the National Natural Science Foundation of China(U1737212and U1637102)the Research Fund of the State Key Laboratory of Solidification Processing(NWPU,China)(Grant No.149-QZ-2016)+1 种基金the Fundamental Research Funds for the Central Universities(3102017jc03009)The Analytical&Testing Center at Northwestern Polytechnical University is also acknowledged for the experimental support on this work
文摘The microstructural evolution of a Ni-based superalloy under interrupted hot compressive deformation with different cooling rates in the inter-pass stage is investigated. It is found that metadynamic recrystallization(MDRX) in the inter-pass stage is more sensitive to the accumulated strain than the deformation temperature which is above the recrystallization temperature. The variations of both the grain distribution and the texture intensity caused by MDRX during the interpass stage result in variations of the yield stress(YS) and the work hardening(WH) rate in each stage. Results also show that the MDRX process in the inter-pass stage has a considerable influence on the final microstructure of three-pass compression. The final grain distribution is more uniform,and the compression texture gradually transforms into recrystallization texture with an increasing degree of MDRX. In order to predict the MDRX fraction in the inter-pass cooling stage, a modified kinetic equation is established, which can reasonably predict the MDRX behavior under multi-pass compression with different conditions in the inter-pass stage. Meanwhile, the influence of the interpass cooling stage on the mechanism of dynamic recrystallization(DRX) is studied. It is universally acknowledged that the discontinuous dynamic recrystallization(DDRX) process is the major deformation mechanism for the Ni-based superalloy. However, the continuous dynamic recrystallization(CDRX) process is promoted in the compression stage with a decrease of the cooling rate in each inter-pass stage.
基金supported by National Natural Science Foundation of China(Grant No.51005017)
文摘Now the optimization strategies for power distribution are researched widely, and most of them are aiming to the optimal fuel economy and the driving cycle must be preknown. Thus if the actual driving condition deviates from the scheduled driving cycle, the effect of optimal results will be declined greatly. Therefore, the instantaneous optimization strategy carried out on-line is studied in this paper. The power split path and the transmission efficiency are analyzed based on a special power-split scheme and the efficiency models of the power transmitting components are established. The synthetical efficiency optimization model is established for enhancing the transmission efficiency and the fuel economy. The identification of the synthetical efficiency as the optimization objective and the constrain group are discussed emphatically. The optimization is calculated by the adaptive simulated annealing （ASA） algorithm and realized on-line by the radial basis function （RBF）-based similar models. The optimization for power distribution of the hybrid vehicle in an actual driving condition is carried out and the road test results are presented. The test results indicate that the synthetical efficiency optimization method can enhance the transmission efficiency and the fuel economy of the power-split hybrid electric vehicle （HEV） observably. Compared to the rules-based strategy the optimization strategy is optimal and achieves the approximate global optimization solution for the power distribution. The synthetical efficiency optimization solved by ASA algorithm can give attentions to both optimization quality and calculation efficiency, thus it has good application foreground for the power distribution of power-split HEV.
文摘The software defects are managed through the knowledge base,and defect management is upgraded from the data level to the knowledge level. The rule knowledge is mined from bug data based on a rule-based knowledge extraction model,and the appropriate strategy is configured in the strategy layer to predict software defects. The model is extracted by direct association rules and extended association rules,which improve the prediction rate of related defects and the efficiency of software testing.
