复杂地形风电场流动具有强烈的非定常现象和多尺度特征,其准确模拟是风资源精细化评估的难点。为兼顾宏观中尺度大气环流和微观非定常流动细节,该文结合中尺度气象研究与预报(weather research and forecasting,WRF)模式和微尺度计算流...复杂地形风电场流动具有强烈的非定常现象和多尺度特征,其准确模拟是风资源精细化评估的难点。为兼顾宏观中尺度大气环流和微观非定常流动细节,该文结合中尺度气象研究与预报(weather research and forecasting,WRF)模式和微尺度计算流体动力学(computational fluid dynamics,CFD)技术,构建一套WRF-CFD模式耦合的复杂地形风电场非定常仿真方法。以国际经典案例Askervein山和Bolund岛为验证对象,研究复杂地形流场中平均风速和湍流强度的分布特征,并简要分析复杂地形中风力机布置策略。结果表明,基于WRF-CFD模式的数值模拟结果与实验观测值有较好的一致性,且优于中尺度数值模拟结果,在选取的特征点位置,风速绝对误差均在2 m/s以内。结果可为风力机的设计、布局、载荷评估及风电场运行控制提供一定参考。展开更多
The rapid advancement of technology and the increasing speed of vehicles have led to a substantial rise in energy consumption and growing concern over environmental pollution.Beyond the promotion of new energy vehicle...The rapid advancement of technology and the increasing speed of vehicles have led to a substantial rise in energy consumption and growing concern over environmental pollution.Beyond the promotion of new energy vehicles,reducing aerodynamic drag remains a critical strategy for improving energy efficiency and lowering emissions.This study investigates the influence of key geometric parameters on the aerodynamic drag of vehicles.A parametric vehicle model was developed,and computational fluid dynamics(CFD)simulations were conducted to analyse variations in the drag coefficient(C_(d))and pressure distribution across different design configurations.The results reveal that the optimal aerodynamic performance—characterized by a minimized drag coefficient—is achieved with the following parameter settings:engine hood angle(α)of 15°,windshield angle(β)of 25°,rear window angle(γ)of 40°,rear upwards tail lift angle(θ)of 10°,ground clearance(d)of 100 mm,and side edge angle(s)of 5°.These findings offer valuable guidance for the aerodynamic optimization of vehicle body design and contribute to strategies aimed at energy conservation and emission reduction in the automotive sector.展开更多
The noise generated by high-speed hair dryers significantly affects user experience,with aerodynamic design playing a crucial role in controlling sound emissions.This study investigates the aerodynamic noise character...The noise generated by high-speed hair dryers significantly affects user experience,with aerodynamic design playing a crucial role in controlling sound emissions.This study investigates the aerodynamic noise characteristics of a commercial high-speed hair dryer through Computational Fluid Dynamics(CFD)analysis.The velocity field,streamline patterns,and vector distribution within the primary flow path and internal cavity were systematically examined.Results indicate that strong interactions between the wake flow generated by the guide vanes and the straight baffle in the rear flow path induce vortex structures near the outlet,which are primarily responsible for highfrequency noise.To address this,the guide vanes and rear flow path geometry were redesigned and optimized for improved acoustic and aerodynamic performance.Underrated operating conditions(28 V,20,000 rpm),the optimized configuration achieves a noise reduction of more than 2.2 dB while increasing outlet wind speed by over 9%.Moreover,the noise suppression effect becomes more pronounced at lower rotational speeds.展开更多
This study presents a comparative analysis of optimisation strategies for designing hull shapes of Autonomous Underwater Vehicles(AUVs),paying special attention to drag,lift-to-drag ratio,and delivered power.A fully i...This study presents a comparative analysis of optimisation strategies for designing hull shapes of Autonomous Underwater Vehicles(AUVs),paying special attention to drag,lift-to-drag ratio,and delivered power.A fully integrated optimisation framework is developed accordingly,combining a single-objective Genetic Algorithm(GA)for design parameter generation,Computer-Aided Geometric Design(CAGD)for the creation of hull geometries and associated fluid domains,and a Reynolds-Averaged Navier-Stokes(RANS)solver for evaluating hydrodynamic performance metrics.This unified approach eliminates manual intervention,enabling automated determination of optimal hull configurations.Three distinct optimisation problems are addressed using the proposed methodology.First,the drag minimisation of a reference afterbody geometry(A1)at zero angle of attack is performed under constraints of fixed length and internal volume for various flow velocities spanning the range from 0.5 to 15 m/s.Second,the lift-to-drag ratio of A1 is maximised at a 6°angle of attack,maintaining constant total length and internal volume.Third,delivered power is minimised for A1 at a 0°angle of attack.The comparative analysis of results from all three optimisation cases reveals hull shapes with practical design significance.Notably,the shape optimised for minimum delivered power outperforms the other two across a range of velocities.Specifically,it achieves reductions in required power by 7.6%,7.8%,10.2%,and 13.04%at velocities of 0.5,1.0,1.5,and 2.152 m/s,respectively.展开更多
文摘复杂地形风电场流动具有强烈的非定常现象和多尺度特征,其准确模拟是风资源精细化评估的难点。为兼顾宏观中尺度大气环流和微观非定常流动细节,该文结合中尺度气象研究与预报(weather research and forecasting,WRF)模式和微尺度计算流体动力学(computational fluid dynamics,CFD)技术,构建一套WRF-CFD模式耦合的复杂地形风电场非定常仿真方法。以国际经典案例Askervein山和Bolund岛为验证对象,研究复杂地形流场中平均风速和湍流强度的分布特征,并简要分析复杂地形中风力机布置策略。结果表明,基于WRF-CFD模式的数值模拟结果与实验观测值有较好的一致性,且优于中尺度数值模拟结果,在选取的特征点位置,风速绝对误差均在2 m/s以内。结果可为风力机的设计、布局、载荷评估及风电场运行控制提供一定参考。
基金funded by the“Hundred Outstanding Talents”Support Program of Jining University,a provincial-level key project in the field of natural sciences,grant number 2023ZYRC23Jining Key R&D Program(Soft Science)Project,No.2024JNZC010Shandong Province Key Research and Development Program(Technology-Based Small and Medium-sized Enterprises Innovation Capability Improvement)Project No.2025TSGCCZZB0679.
文摘The rapid advancement of technology and the increasing speed of vehicles have led to a substantial rise in energy consumption and growing concern over environmental pollution.Beyond the promotion of new energy vehicles,reducing aerodynamic drag remains a critical strategy for improving energy efficiency and lowering emissions.This study investigates the influence of key geometric parameters on the aerodynamic drag of vehicles.A parametric vehicle model was developed,and computational fluid dynamics(CFD)simulations were conducted to analyse variations in the drag coefficient(C_(d))and pressure distribution across different design configurations.The results reveal that the optimal aerodynamic performance—characterized by a minimized drag coefficient—is achieved with the following parameter settings:engine hood angle(α)of 15°,windshield angle(β)of 25°,rear window angle(γ)of 40°,rear upwards tail lift angle(θ)of 10°,ground clearance(d)of 100 mm,and side edge angle(s)of 5°.These findings offer valuable guidance for the aerodynamic optimization of vehicle body design and contribute to strategies aimed at energy conservation and emission reduction in the automotive sector.
基金supported by Research Project of Zhuhai City Polytechnic(Grant No.2024KYBS06)Education Research Project of Zhuhai City Polytechnic(Grant No.JY20250404).
文摘The noise generated by high-speed hair dryers significantly affects user experience,with aerodynamic design playing a crucial role in controlling sound emissions.This study investigates the aerodynamic noise characteristics of a commercial high-speed hair dryer through Computational Fluid Dynamics(CFD)analysis.The velocity field,streamline patterns,and vector distribution within the primary flow path and internal cavity were systematically examined.Results indicate that strong interactions between the wake flow generated by the guide vanes and the straight baffle in the rear flow path induce vortex structures near the outlet,which are primarily responsible for highfrequency noise.To address this,the guide vanes and rear flow path geometry were redesigned and optimized for improved acoustic and aerodynamic performance.Underrated operating conditions(28 V,20,000 rpm),the optimized configuration achieves a noise reduction of more than 2.2 dB while increasing outlet wind speed by over 9%.Moreover,the noise suppression effect becomes more pronounced at lower rotational speeds.
文摘This study presents a comparative analysis of optimisation strategies for designing hull shapes of Autonomous Underwater Vehicles(AUVs),paying special attention to drag,lift-to-drag ratio,and delivered power.A fully integrated optimisation framework is developed accordingly,combining a single-objective Genetic Algorithm(GA)for design parameter generation,Computer-Aided Geometric Design(CAGD)for the creation of hull geometries and associated fluid domains,and a Reynolds-Averaged Navier-Stokes(RANS)solver for evaluating hydrodynamic performance metrics.This unified approach eliminates manual intervention,enabling automated determination of optimal hull configurations.Three distinct optimisation problems are addressed using the proposed methodology.First,the drag minimisation of a reference afterbody geometry(A1)at zero angle of attack is performed under constraints of fixed length and internal volume for various flow velocities spanning the range from 0.5 to 15 m/s.Second,the lift-to-drag ratio of A1 is maximised at a 6°angle of attack,maintaining constant total length and internal volume.Third,delivered power is minimised for A1 at a 0°angle of attack.The comparative analysis of results from all three optimisation cases reveals hull shapes with practical design significance.Notably,the shape optimised for minimum delivered power outperforms the other two across a range of velocities.Specifically,it achieves reductions in required power by 7.6%,7.8%,10.2%,and 13.04%at velocities of 0.5,1.0,1.5,and 2.152 m/s,respectively.
