As an important source of clean and renewable resources,the importance of wind power generation is increasing under the background of the theme of“environmental protection”in the new era.The efficiency of wind power...As an important source of clean and renewable resources,the importance of wind power generation is increasing under the background of the theme of“environmental protection”in the new era.The efficiency of wind power generation is mainly affected by the reliability and performance of the power generation system,so it is necessary to use a single-chip microcomputer system and an intelligent algorithm to assist control,so as to improve the performance of wind power generation.Based on this research background,this paper expounds the working principle and basic characteristics of a single-chip microcomputer,summarizes its application advantages in wind turbine control,and puts forward the application practice strategy of a single-chip microcomputer in a wind turbine control system,which provides important assistance for the upgrading of the wind power system.展开更多
This article focuses on the current computer monitoring and control as the research direction,studying the application strategies of artificial intelligence and big data technology in this field.It includes an introdu...This article focuses on the current computer monitoring and control as the research direction,studying the application strategies of artificial intelligence and big data technology in this field.It includes an introduction to artificial intelligence and big data technology,the application strategies of artificial intelligence and big data technology in computer hardware,software,and network monitoring,as well as the application strategies of artificial intelligence and big data technology in computer process,access,and network control.This analysis aims to serve as a reference for the application of artificial intelligence and big data technology in computer monitoring and control,ultimately enhancing the security of computer systems.展开更多
BACKGROUND Schizophrenia is commonly associated with comorbid depression,which exacerbates cognitive impairments and negatively impacts quality of life.Despite the high prevalence and burden of these comorbidities,eff...BACKGROUND Schizophrenia is commonly associated with comorbid depression,which exacerbates cognitive impairments and negatively impacts quality of life.Despite the high prevalence and burden of these comorbidities,effective treatment options,particularly for cognitive dysfunction,remain limited.AIM To evaluate the efficacy of computerized cognitive behavioral therapy(CCBT)with sertraline vs sertraline monotherapy in improving depressive symptoms,cognitive function,and quality of life in schizophrenia and depressive episodes.METHODS In this single-center,randomized controlled trial,68 adults[mean age(SD)=36.5(10.0),57.4%male]with schizophrenia and depressive symptoms were randomly assigned to receive either CCBT with sertraline or sertraline monotherapy during a 4-week hospitalization.The CCBT intervention involved 45-60-minute sessions twice weekly for four weeks.Outcomes included comparisons of depressive symptoms(Calgary depression scale for schizophrenia),cognitive function[MATRICS consensus cognitive battery(MCCB)],and quality of life(36-item short form survey)between the groups.RESULTS The experimental group showed greater improvements in depressive symptoms at 4,8,and 12 weeks compared to the controls,with the most notable difference at 12 weeks[mean difference(MD)=-1.7;P<0.001;Cohen’s d=0.9].Cognitive function improved across all MCCB domains in the experimental group,with higher processing speed scores(MD=4.1;P=0.043;Cohen’s d=0.5)and social cognition scores(MD=4.9;P=0.006;Cohen’s d=0.7)than in the control group.Quality of life,particularly in mental health,was significantly better in the experimental group.CONCLUSION CCBT with sertraline was more effective than sertraline monotherapy for patients with schizophrenia and depressive episodes,supporting its use as an adjunctive therapy.展开更多
This paper proposes the assumption that the flow with viscous friction is the stretch of part of the sheet that lies along the walls of a die during the process of superplastic bulging according to superplastic flow e...This paper proposes the assumption that the flow with viscous friction is the stretch of part of the sheet that lies along the walls of a die during the process of superplastic bulging according to superplastic flow equation and geometrical model of bulging of a sheet into a long trapezoid groove or truncated cone, by introducing the friction-factor P which describes the friction effect on the process. Also, the paper proposes the method of controlling thickness nonuniformity and develops the equipment which for uniform thickness of bulging, is automatically controlled with a computerl it also analyzes the important innuence of lubrication on thickness distribution of bulging materials. By the assumption, the relationship between bulging pressure and time is obtained in bulging of a sheet into the groove and cone, and p-t curve of multi-mould-cavity complicated bulging is discussed based on the analysis of single-mould-cavity bulging characteristics.展开更多
An automobile test controlling and managing system with computer network is introduced. The architecture of the local network, hardware structure, software structure, design of the test process, and error tolerating r...An automobile test controlling and managing system with computer network is introduced. The architecture of the local network, hardware structure, software structure, design of the test process, and error tolerating redundant design in work position substituting are presented. At last, the pivotal questions solved are discussed. With an advanced structure, this system is multi functional and flexible. Furthermore, advanced computer technology is adopted to improve its technical degree.展开更多
Describes a computer controlled polishing machine utilizing a small polisher with specified movement to figure optical surfces having strict dimensional requirements. The system is especially applicable in figuring as...Describes a computer controlled polishing machine utilizing a small polisher with specified movement to figure optical surfces having strict dimensional requirements. The system is especially applicable in figuring aspherical surfaces, beginning with the best fit sphere if the departure from the desired surface is not large. An interferometric measuring system is desiigned to form a closed loop control during processing.展开更多
[Objective] To discuss the application of simulation technique in preliminary solution of reservoir flood control of.[Method] Based on the study of river system simulation theory,the InfoWorks RS system was adopted to...[Objective] To discuss the application of simulation technique in preliminary solution of reservoir flood control of.[Method] Based on the study of river system simulation theory,the InfoWorks RS system was adopted to build a digital analog model for flood routing in certain river system and the flood discharge was analyzed with the check criterion.[Result] The flood information system based on InfoWorks RS simulated the inundation of downstream during flood discharge and drew mutation pictures to indicate how hydraulic parameters of maximum runoff at each control section,runoff of each control section and flow velocity varied with time,how hydraulic elements mutated with time as well as the most likely inundated area analysis of lower reservoir.[Conclusion] To provide references for reducing serious loss caused by flood and making out preliminary solution to flood control.展开更多
There should be high resolution demand that is better than 1000 DPI(dot per inch) for high precision image scanning system. This paper introduced the two-level computer controlled system that consisted of LS-3500 film...There should be high resolution demand that is better than 1000 DPI(dot per inch) for high precision image scanning system. This paper introduced the two-level computer controlled system that consisted of LS-3500 film scanner, AST386/33 monitoring control level and Intel 8031 single chip computer that is used as DDC level. The formula for scanning image data processing and methods of statistic parameters calculating are described.展开更多
A design method of an intelligent temperature control system based on single-chip microcomputer is presented in this paper. The intelligent temperature control system is divided into four parts: monitor,heater,control...A design method of an intelligent temperature control system based on single-chip microcomputer is presented in this paper. The intelligent temperature control system is divided into four parts: monitor,heater,controlled process and feedback loop. Among them,the temperature detection circuit is designed with the conductivity of water by sensor detection. The optical coupler MOC3041 is used to implement the power control circuit,whose control object is 1 kW electric heater with the 220 V alternating current power; keyboard and display circuit SMC1602A include four buttons and LCD display to achieve human-computer interaction; Based on single-chip system STC89C52,the sensor signal and keyboard set target temperature are compared to the power automatically in order to finish the water temperature control. Through the static and dynamic data testing,the results show that the proposed method provides an effective way to realize the real-time acquisition and control of temperature.展开更多
In this paper, neural network control systems for decreasing the spatter of CO2 welding have been created. The Generalized inverse Learning Architecture(GILA), the SPecialized inverse Learning Architecture(SILA)-I &a...In this paper, neural network control systems for decreasing the spatter of CO2 welding have been created. The Generalized inverse Learning Architecture(GILA), the SPecialized inverse Learning Architecture(SILA)-I & H and the Error Back Propagating Model(EBPM) are adopted respectively to simulate the static and dynamic welding control processes. The results of simulation and experiment show that the SILA-I and EBPM have betted properties. The factors affecting the simulating results and the dynamic response quality have also been analyzed.展开更多
Pump controlled motor electrohydraulic servo systems are much used in circumstances where high power drive is needed. This kind of system has the advantage of energy-saving. But, it also has some defects that have to ...Pump controlled motor electrohydraulic servo systems are much used in circumstances where high power drive is needed. This kind of system has the advantage of energy-saving. But, it also has some defects that have to be improved. Microcomputer control of a pump controlled motor electrohydraulic servo system is studied. A PID controller is first adopted on the closed loop control system, and experimental results are obtained. Then, a model reference adaptive controller is designed and realised on the same system applying a single board microcomputer. Experimental results show that the dynamic properties of the adaptive control system is much better than those of the PID system under different inertia load conditions.展开更多
A new kind of control system for keyhole plasma arc welding （K-PAW） was developed based on the computer and the Graphics Language--LabVIEW. It can set and output the required current waveforms with desired decreasin...A new kind of control system for keyhole plasma arc welding （K-PAW） was developed based on the computer and the Graphics Language--LabVIEW. It can set and output the required current waveforms with desired decreasing slopes so that the corresponding ＂opening and closing＂ of keyhole can occur periodically. With this control strategy of welding current waveforms, the workpiece is fully penetrated while no burn-through Occurs. Keyhole plasma arc welding experiments were conducted to verify the stability and reliability of the developed system.展开更多
Aim： To evaluate the effects of retrospective quality control on pressure-flow data with computer-based urodynamic systems from men with benign prostatic hyperplasia （BPH）. Methods： A total of 582 traces of pressu...Aim： To evaluate the effects of retrospective quality control on pressure-flow data with computer-based urodynamic systems from men with benign prostatic hyperplasia （BPH）. Methods： A total of 582 traces of pressure-flow study from 181 men with BPH was included in the study. For each trace, maximum urinary flow rate （Qmax） and detrusor pressure at Qmax （pdet.Qmax） were, respectively, read from manually smoothed and corrected uroflow and detrusor pressure curves from the computer print-outs. Obstruction coefficient, International Continence Society （ICS） and Schaefer nomograms were used to detect urethral resistance and to diagnose obstruction. The results obtained by manual reading were compared with those from computer-based systems. Results： After manual correction, Qmax underwent a consistently significant decrease by 1.2 mL/s on average （P 〈 0.001）, and had a change range of 0.5-10.4 mL/s. However, pdet.Qmax underwent inconsistently intra-individual changes after correction. The obstruction coefficient increased significantly, by an average of 0.07 （P 〈 0.05）. Using the ICS nomogram, the percentage of obstruction increased from 69.8% to 73.9%, and of the non-obstruction decreased from 8.8% to 5.3% （P 〈 0.05）. There were 11% of traces that changed the classifications using the ICS nomogram, and 28.9% that changed the grades for the Schaefer nomogram. Conclusion： Systematically significant differences in parameters from pres- sure-flow study between manual readings and computer recordings were demonstrated. Manual correction resulted in a consistently lower Q a higher urethral resistance, and an aggravating obstruction. Manual readings can correct considerable false diagnoses for obstruction. Retrospective quality control of pressure-flow data with com- puter-based systems is necessary.展开更多
The calibration curves obtained using strain gages are used to predict surface crack length on plate specimen subjected to 4-point bending fatigue loading. The results shows that the proposed procedure is of high prec...The calibration curves obtained using strain gages are used to predict surface crack length on plate specimen subjected to 4-point bending fatigue loading. The results shows that the proposed procedure is of high precision with the maximum error percentage being less than 6%, and it can be easily used to estimate or monitor the surface crack length under fatigue loading both in laboratory and in engineering. It is also quite meanful for nondamage detecting.展开更多
This paper attempts to set a unified scene for various linear time-invariant (LTI) control system design schemes, by transforming the existing concept of “computer-aided control system design” (CACSD) to novel “com...This paper attempts to set a unified scene for various linear time-invariant (LTI) control system design schemes, by transforming the existing concept of “computer-aided control system design” (CACSD) to novel “computer-automated control system design” (CAutoCSD). The first step towards this goal is to accommodate, under practical constraints, various design objectives that are desirable in both time and frequency domains. Such performance-prioritised unification is aimed at relieving practising engineers from having to select a particular control scheme and from sacrificing certain performance goals resulting from pre-commitment to such schemes. With recent progress in evolutionary computing based extra-numeric, multi-criterion search and optimisation techniques, such unification of LTI control schemes becomes feasible, analytical and practical, and the resultant designs can be creative. The techniques developed are applied to, and illustrated by, three design problems. The unified approach automatically provides an integrator for zero-steady state error in velocity control of a DC motor, and meets multiple objectives in the design of an LTI controller for a non-minimum phase plant and offers a high-performance LTI controller network for a non-linear chemical process.展开更多
A modified temperature-phase transformation field coupled nonlinear mathematical model was made and used in computer simulation on the controlled cooling of 82B high-speed rods. The surface temperature history and vol...A modified temperature-phase transformation field coupled nonlinear mathematical model was made and used in computer simulation on the controlled cooling of 82B high-speed rods. The surface temperature history and volume fraction of pearlite as well as the phase transformation history were simulated by using the finite element software Marc/Mentat. The simulated results were compared with the actual measurement and the agreement is good which can validate the presented computational models.展开更多
Presents a one grade adaptive controller with one reference model which is built according to δ MRACS adaptive control theory and used to control an actual high order hydraulic system, and the whole hardware system u...Presents a one grade adaptive controller with one reference model which is built according to δ MRACS adaptive control theory and used to control an actual high order hydraulic system, and the whole hardware system used, which includes a AT89C51 single chip microcomputer, 74Ls373 flip latch, 6116 store, eight bit ADC0809, and so on, and the satisfactory results obtained in study on hydraulic control system.展开更多
Based on the TK7 high-temperature tunnel kiln computer control system, this article describes the control line system, the automatic loop control which has been realized in firing zone temperature, inner and bottom pr...Based on the TK7 high-temperature tunnel kiln computer control system, this article describes the control line system, the automatic loop control which has been realized in firing zone temperature, inner and bottom pressure and flow, and logic control of kiln doors and pusher, etc. In addition, this system integrates the product information management system of magnesite brick and efficiently ensures the important process parameters. During three months performance of the control system, all parameters and energy consumption have turned out a good result.展开更多
Driven by the ever increasing demand in function integration,more and more next generation high value-added products,such as head-up displays,solar concentrators and intra-ocular-lens,etc.,are designed to possess free...Driven by the ever increasing demand in function integration,more and more next generation high value-added products,such as head-up displays,solar concentrators and intra-ocular-lens,etc.,are designed to possess freeform(i.e.,non-rotational symmetric)surfaces.The toolpath,composed of high density of short linear and circular segments,is generally used in computer numerical control(CNC)systems to machine those products.However,the discontinuity between toolpath segments leads to high-frequency fluctuation of feedrate and acceleration,which will decrease the machining efficiency and product surface finish.Driven by the ever-increasing need for high-speed high-precision machining of those products,many novel toolpath interpolation and smoothing approaches have been proposed in both academia and industry,aiming to alleviate the issues caused by the conventional toolpath representation and interpolation methods.This paper provides a comprehensive review of the state-of-the-art toolpath interpolation and smoothing approaches with systematic classifications.The advantages and disadvantages of these approaches are discussed.Possible future research directions are also offered.展开更多
Aimed at the welding ttechnological requirements of foe missile shell,a computer control system for automatic TIG welding of aluminium alloy sheets has been developed in this paper.The hardware of the system is compos...Aimed at the welding ttechnological requirements of foe missile shell,a computer control system for automatic TIG welding of aluminium alloy sheets has been developed in this paper.The hardware of the system is composed of the four sub-systems,i.e.weldingpower source,arc length controller,welding wire feeder and welding head traveller.The software of the system comprises the on-line executing program and the off-line serving program.The operating principle,specifications and control of the system are introduced.The experiments indicate that the system possesses rational hardware structure and practical software function,and has solved the problem of high frequency interference to the computer control system. Therefore,the control system can satisfy the requirements of automatic TIG welding of the missile shell.展开更多
文摘As an important source of clean and renewable resources,the importance of wind power generation is increasing under the background of the theme of“environmental protection”in the new era.The efficiency of wind power generation is mainly affected by the reliability and performance of the power generation system,so it is necessary to use a single-chip microcomputer system and an intelligent algorithm to assist control,so as to improve the performance of wind power generation.Based on this research background,this paper expounds the working principle and basic characteristics of a single-chip microcomputer,summarizes its application advantages in wind turbine control,and puts forward the application practice strategy of a single-chip microcomputer in a wind turbine control system,which provides important assistance for the upgrading of the wind power system.
文摘This article focuses on the current computer monitoring and control as the research direction,studying the application strategies of artificial intelligence and big data technology in this field.It includes an introduction to artificial intelligence and big data technology,the application strategies of artificial intelligence and big data technology in computer hardware,software,and network monitoring,as well as the application strategies of artificial intelligence and big data technology in computer process,access,and network control.This analysis aims to serve as a reference for the application of artificial intelligence and big data technology in computer monitoring and control,ultimately enhancing the security of computer systems.
基金Supported by Fuzhou Science and Technology Plan Project,No.2023-S-028.
文摘BACKGROUND Schizophrenia is commonly associated with comorbid depression,which exacerbates cognitive impairments and negatively impacts quality of life.Despite the high prevalence and burden of these comorbidities,effective treatment options,particularly for cognitive dysfunction,remain limited.AIM To evaluate the efficacy of computerized cognitive behavioral therapy(CCBT)with sertraline vs sertraline monotherapy in improving depressive symptoms,cognitive function,and quality of life in schizophrenia and depressive episodes.METHODS In this single-center,randomized controlled trial,68 adults[mean age(SD)=36.5(10.0),57.4%male]with schizophrenia and depressive symptoms were randomly assigned to receive either CCBT with sertraline or sertraline monotherapy during a 4-week hospitalization.The CCBT intervention involved 45-60-minute sessions twice weekly for four weeks.Outcomes included comparisons of depressive symptoms(Calgary depression scale for schizophrenia),cognitive function[MATRICS consensus cognitive battery(MCCB)],and quality of life(36-item short form survey)between the groups.RESULTS The experimental group showed greater improvements in depressive symptoms at 4,8,and 12 weeks compared to the controls,with the most notable difference at 12 weeks[mean difference(MD)=-1.7;P<0.001;Cohen’s d=0.9].Cognitive function improved across all MCCB domains in the experimental group,with higher processing speed scores(MD=4.1;P=0.043;Cohen’s d=0.5)and social cognition scores(MD=4.9;P=0.006;Cohen’s d=0.7)than in the control group.Quality of life,particularly in mental health,was significantly better in the experimental group.CONCLUSION CCBT with sertraline was more effective than sertraline monotherapy for patients with schizophrenia and depressive episodes,supporting its use as an adjunctive therapy.
文摘This paper proposes the assumption that the flow with viscous friction is the stretch of part of the sheet that lies along the walls of a die during the process of superplastic bulging according to superplastic flow equation and geometrical model of bulging of a sheet into a long trapezoid groove or truncated cone, by introducing the friction-factor P which describes the friction effect on the process. Also, the paper proposes the method of controlling thickness nonuniformity and develops the equipment which for uniform thickness of bulging, is automatically controlled with a computerl it also analyzes the important innuence of lubrication on thickness distribution of bulging materials. By the assumption, the relationship between bulging pressure and time is obtained in bulging of a sheet into the groove and cone, and p-t curve of multi-mould-cavity complicated bulging is discussed based on the analysis of single-mould-cavity bulging characteristics.
文摘An automobile test controlling and managing system with computer network is introduced. The architecture of the local network, hardware structure, software structure, design of the test process, and error tolerating redundant design in work position substituting are presented. At last, the pivotal questions solved are discussed. With an advanced structure, this system is multi functional and flexible. Furthermore, advanced computer technology is adopted to improve its technical degree.
文摘Describes a computer controlled polishing machine utilizing a small polisher with specified movement to figure optical surfces having strict dimensional requirements. The system is especially applicable in figuring aspherical surfaces, beginning with the best fit sphere if the departure from the desired surface is not large. An interferometric measuring system is desiigned to form a closed loop control during processing.
基金Supported by 948 Project Launched by Ministry of Water Resources(CT200210)~~
文摘[Objective] To discuss the application of simulation technique in preliminary solution of reservoir flood control of.[Method] Based on the study of river system simulation theory,the InfoWorks RS system was adopted to build a digital analog model for flood routing in certain river system and the flood discharge was analyzed with the check criterion.[Result] The flood information system based on InfoWorks RS simulated the inundation of downstream during flood discharge and drew mutation pictures to indicate how hydraulic parameters of maximum runoff at each control section,runoff of each control section and flow velocity varied with time,how hydraulic elements mutated with time as well as the most likely inundated area analysis of lower reservoir.[Conclusion] To provide references for reducing serious loss caused by flood and making out preliminary solution to flood control.
文摘There should be high resolution demand that is better than 1000 DPI(dot per inch) for high precision image scanning system. This paper introduced the two-level computer controlled system that consisted of LS-3500 film scanner, AST386/33 monitoring control level and Intel 8031 single chip computer that is used as DDC level. The formula for scanning image data processing and methods of statistic parameters calculating are described.
基金Sponsored by the Fundamental Research Funds for Heilongjiang Postdoctoral Grant(Grant No.LRB11-334)Natural Science Foundation of Heilongjiang Province(Grant No.QC2013C035)+1 种基金Heilongjiang Province Education Department of Science and Technology Research Foundation(Grant No.12533014)the Foundamental Research Funds for the Central Universities(Grant No.2572014CB13)
文摘A design method of an intelligent temperature control system based on single-chip microcomputer is presented in this paper. The intelligent temperature control system is divided into four parts: monitor,heater,controlled process and feedback loop. Among them,the temperature detection circuit is designed with the conductivity of water by sensor detection. The optical coupler MOC3041 is used to implement the power control circuit,whose control object is 1 kW electric heater with the 220 V alternating current power; keyboard and display circuit SMC1602A include four buttons and LCD display to achieve human-computer interaction; Based on single-chip system STC89C52,the sensor signal and keyboard set target temperature are compared to the power automatically in order to finish the water temperature control. Through the static and dynamic data testing,the results show that the proposed method provides an effective way to realize the real-time acquisition and control of temperature.
文摘In this paper, neural network control systems for decreasing the spatter of CO2 welding have been created. The Generalized inverse Learning Architecture(GILA), the SPecialized inverse Learning Architecture(SILA)-I & H and the Error Back Propagating Model(EBPM) are adopted respectively to simulate the static and dynamic welding control processes. The results of simulation and experiment show that the SILA-I and EBPM have betted properties. The factors affecting the simulating results and the dynamic response quality have also been analyzed.
基金The Project Supported by Doctoral Programme Foundation of Institution of Higher Education
文摘Pump controlled motor electrohydraulic servo systems are much used in circumstances where high power drive is needed. This kind of system has the advantage of energy-saving. But, it also has some defects that have to be improved. Microcomputer control of a pump controlled motor electrohydraulic servo system is studied. A PID controller is first adopted on the closed loop control system, and experimental results are obtained. Then, a model reference adaptive controller is designed and realised on the same system applying a single board microcomputer. Experimental results show that the dynamic properties of the adaptive control system is much better than those of the PID system under different inertia load conditions.
文摘A new kind of control system for keyhole plasma arc welding （K-PAW） was developed based on the computer and the Graphics Language--LabVIEW. It can set and output the required current waveforms with desired decreasing slopes so that the corresponding ＂opening and closing＂ of keyhole can occur periodically. With this control strategy of welding current waveforms, the workpiece is fully penetrated while no burn-through Occurs. Keyhole plasma arc welding experiments were conducted to verify the stability and reliability of the developed system.
文摘Aim： To evaluate the effects of retrospective quality control on pressure-flow data with computer-based urodynamic systems from men with benign prostatic hyperplasia （BPH）. Methods： A total of 582 traces of pressure-flow study from 181 men with BPH was included in the study. For each trace, maximum urinary flow rate （Qmax） and detrusor pressure at Qmax （pdet.Qmax） were, respectively, read from manually smoothed and corrected uroflow and detrusor pressure curves from the computer print-outs. Obstruction coefficient, International Continence Society （ICS） and Schaefer nomograms were used to detect urethral resistance and to diagnose obstruction. The results obtained by manual reading were compared with those from computer-based systems. Results： After manual correction, Qmax underwent a consistently significant decrease by 1.2 mL/s on average （P 〈 0.001）, and had a change range of 0.5-10.4 mL/s. However, pdet.Qmax underwent inconsistently intra-individual changes after correction. The obstruction coefficient increased significantly, by an average of 0.07 （P 〈 0.05）. Using the ICS nomogram, the percentage of obstruction increased from 69.8% to 73.9%, and of the non-obstruction decreased from 8.8% to 5.3% （P 〈 0.05）. There were 11% of traces that changed the classifications using the ICS nomogram, and 28.9% that changed the grades for the Schaefer nomogram. Conclusion： Systematically significant differences in parameters from pres- sure-flow study between manual readings and computer recordings were demonstrated. Manual correction resulted in a consistently lower Q a higher urethral resistance, and an aggravating obstruction. Manual readings can correct considerable false diagnoses for obstruction. Retrospective quality control of pressure-flow data with com- puter-based systems is necessary.
文摘The calibration curves obtained using strain gages are used to predict surface crack length on plate specimen subjected to 4-point bending fatigue loading. The results shows that the proposed procedure is of high precision with the maximum error percentage being less than 6%, and it can be easily used to estimate or monitor the surface crack length under fatigue loading both in laboratory and in engineering. It is also quite meanful for nondamage detecting.
文摘This paper attempts to set a unified scene for various linear time-invariant (LTI) control system design schemes, by transforming the existing concept of “computer-aided control system design” (CACSD) to novel “computer-automated control system design” (CAutoCSD). The first step towards this goal is to accommodate, under practical constraints, various design objectives that are desirable in both time and frequency domains. Such performance-prioritised unification is aimed at relieving practising engineers from having to select a particular control scheme and from sacrificing certain performance goals resulting from pre-commitment to such schemes. With recent progress in evolutionary computing based extra-numeric, multi-criterion search and optimisation techniques, such unification of LTI control schemes becomes feasible, analytical and practical, and the resultant designs can be creative. The techniques developed are applied to, and illustrated by, three design problems. The unified approach automatically provides an integrator for zero-steady state error in velocity control of a DC motor, and meets multiple objectives in the design of an LTI controller for a non-minimum phase plant and offers a high-performance LTI controller network for a non-linear chemical process.
基金the National Doctorate Fund by the Ministry of Education of China(No.20020008011)
文摘A modified temperature-phase transformation field coupled nonlinear mathematical model was made and used in computer simulation on the controlled cooling of 82B high-speed rods. The surface temperature history and volume fraction of pearlite as well as the phase transformation history were simulated by using the finite element software Marc/Mentat. The simulated results were compared with the actual measurement and the agreement is good which can validate the presented computational models.
文摘Presents a one grade adaptive controller with one reference model which is built according to δ MRACS adaptive control theory and used to control an actual high order hydraulic system, and the whole hardware system used, which includes a AT89C51 single chip microcomputer, 74Ls373 flip latch, 6116 store, eight bit ADC0809, and so on, and the satisfactory results obtained in study on hydraulic control system.
文摘Based on the TK7 high-temperature tunnel kiln computer control system, this article describes the control line system, the automatic loop control which has been realized in firing zone temperature, inner and bottom pressure and flow, and logic control of kiln doors and pusher, etc. In addition, this system integrates the product information management system of magnesite brick and efficiently ensures the important process parameters. During three months performance of the control system, all parameters and energy consumption have turned out a good result.
基金the support from the UK Engineering and Physical Sciences Research Council (EPSRC) under the program (No. EP/K018345/1)the International Cooperation Program of China (No. 2015DFA70630)
文摘Driven by the ever increasing demand in function integration,more and more next generation high value-added products,such as head-up displays,solar concentrators and intra-ocular-lens,etc.,are designed to possess freeform(i.e.,non-rotational symmetric)surfaces.The toolpath,composed of high density of short linear and circular segments,is generally used in computer numerical control(CNC)systems to machine those products.However,the discontinuity between toolpath segments leads to high-frequency fluctuation of feedrate and acceleration,which will decrease the machining efficiency and product surface finish.Driven by the ever-increasing need for high-speed high-precision machining of those products,many novel toolpath interpolation and smoothing approaches have been proposed in both academia and industry,aiming to alleviate the issues caused by the conventional toolpath representation and interpolation methods.This paper provides a comprehensive review of the state-of-the-art toolpath interpolation and smoothing approaches with systematic classifications.The advantages and disadvantages of these approaches are discussed.Possible future research directions are also offered.
文摘Aimed at the welding ttechnological requirements of foe missile shell,a computer control system for automatic TIG welding of aluminium alloy sheets has been developed in this paper.The hardware of the system is composed of the four sub-systems,i.e.weldingpower source,arc length controller,welding wire feeder and welding head traveller.The software of the system comprises the on-line executing program and the off-line serving program.The operating principle,specifications and control of the system are introduced.The experiments indicate that the system possesses rational hardware structure and practical software function,and has solved the problem of high frequency interference to the computer control system. Therefore,the control system can satisfy the requirements of automatic TIG welding of the missile shell.
