It is generally recognized that internal-loop reactors are well-developed mass and heat-transfer multiphase flow reactors. However, the internal flow field in the internal-loop reactor is influenced by the structure p...It is generally recognized that internal-loop reactors are well-developed mass and heat-transfer multiphase flow reactors. However, the internal flow field in the internal-loop reactor is influenced by the structure parameter of the reactor, which has a great effect on the reaction efficiency. In this study, the computational fluid dynamics simulation method was used to determine the influence of reactor structure on flow field, and a volume-offluid model was employed to simulate the gas–liquid, two-phase flow of the internal-loop micro-electrolysis reactor. Hydrodynamic factors were optimized when the height-to-diameter ratio was 4:1, diameter ratio was9:1, draft-tube axial height was 90 mm. Three-dimensional simulations for the water distributor were carried out, and the results suggested that the optimal conditions are as follows: the number of water distribution pipes was four, and an inhomogeneous water distribution was used. According to the results of the simulation,the suitable structure can be used to achieve good fluid mechanical properties, such as the good liquid circulation velocity and gas holdup, which provides a good theoretical foundation for the application of the reactor.展开更多
Soft machine refers to a kind of mechanical system made of soft materials to complete sophisticated missions, such as handling a fragile object and crawling along a narrow tunnel corner, under low cost control and act...Soft machine refers to a kind of mechanical system made of soft materials to complete sophisticated missions, such as handling a fragile object and crawling along a narrow tunnel corner, under low cost control and actuation. Hence, soft machines have raised great challenges to computational dynamics. In this review article, recent studies of the authors on the dynamic modeling, numerical simulation, and experimental validation of soft machines are summarized in the framework of multibody system dynamics. The dynamic modeling approaches are presented first for the geometric nonlinearities of coupled overall motions and large deformations of a soft component, the physical nonlinearities of a soft component made of hyperelastic or elastoplastic materials, and the frictional contacts/impacts of soft components, respectively. Then the computation approach is outlined for the dynamic simulation of soft machines governed by a set of differential-algebraic equations of very high dimensions, with an emphasis on the efficient computations of the nonlinear elastic force vector of finite elements. The validations of the proposed approaches are given via three case studies, including the locomotion of a soft quadrupedal robot, the spinning deployment of a solar sail of a spacecraft, and the deployment of a mesh reflector of a satellite antenna, as well as the corresponding experimental studies. Finally, some remarks are made for future studies.展开更多
Characterizing the complex two-phase hydrodynamics in structured packed columns requires a power- ful modeling tool. The traditional two-dimensional model exhibits limitations when one attempts to model the de- tailed...Characterizing the complex two-phase hydrodynamics in structured packed columns requires a power- ful modeling tool. The traditional two-dimensional model exhibits limitations when one attempts to model the de- tailed two-phase flow inside the columns. The present paper presents a three-dimensional computational fluid dy- namics （CFD） model to simulate the two-phase flow in a representative unit of the column. The unit consists of an CFD calculations on column packed with Flexipak 1Y were implemented within the volume of fluid （VOF） mathe- matical framework. The CFD model was validated by comparing the calculated thickness of liquid film with the available experimental data. Special attention was given to quantitative analysis of the effects of gravity on the hy- drodynamics. Fluctuations in the liquid mass flow rate and the calculated pressure drop loss were found to be quali- tatively in agreement with the experimental observations.展开更多
Journal bearings are important parts to keep the high dynamic performance of rotor machinery. Some methods have already been proposed to analysis the flow field of journal bearings, and in most of these methods simpli...Journal bearings are important parts to keep the high dynamic performance of rotor machinery. Some methods have already been proposed to analysis the flow field of journal bearings, and in most of these methods simplified physical model and classic Reynolds equation are always applied. While the application of the general computational fluid dynamics （CFD）-fluid structure interaction （FSI） techniques is more beneficial for analysis of the fluid field in a journal bearing when more detailed solutions are needed. This paper deals with the quasi-coupling calculation of transient fluid dynamics of oil film in journal bearings and rotor dynamics with CFD-FSI techniques. The fluid dynamics of oil film is calculated by applying the so-called ＂dynamic mesh＂ technique. A new mesh movement approacb is presented while the dynamic mesh models provided by FLUENT are not suitable for the transient oil flow in journal bearings. The proposed mesh movement approach is based on the structured mesh. When the joumal moves, the movement distance of every grid in the flow field of bearing can be calculated, and then the update of the volume mesh can be handled automatically by user defined function （UDF）. The journal displacement at each time step is obtained by solving the moving equations of the rotor-bearing system under the known oil film force condition. A case study is carried out to calculate the locus of the journal center and pressure distribution of the journal in order to prove the feasibility of this method. The calculating results indicate that the proposed method can predict the transient flow field of a journal bearing in a rotor-bearing system where more realistic models are involved. The presented calculation method provides a basis for studying the nonlinear dynamic behavior of a general rotor-bearing system.展开更多
For accurate aeroelastic analysis,the unsteady rotor flowfield is solved by computational fluid dynamics(CFD)module based on RANS/Euler equations and moving-embedded grid system,while computational structural dynamics...For accurate aeroelastic analysis,the unsteady rotor flowfield is solved by computational fluid dynamics(CFD)module based on RANS/Euler equations and moving-embedded grid system,while computational structural dynamics(CSD)module is introduced to handle blade flexibility.In CFD module,dual time-stepping algorithm is employed in temporal discretization,Jameson two-order central difference(JST)scheme is adopted in spatial discretization and B-L turbulent model is used to illustrate the viscous effect.The CSD module is developed based on Hamilton′s variational principles and moderate deflection beam theory.Grid deformation is implemented using algebraic method through coordinate transformations to achieve deflections with high quality and efficiency.A CFD/CSD loose coupling strategy is developed to transfer information between rotor flowfield and blade structure.The CFD and the CSD modules are verified seperately.Then the CFD/CSD loose coupling is adopted in airloads prediction of UH-60A rotor under high speed forward flight condition.The calculated results agree well with test data.Finally,effects of torsional stiffness properties on airloads of rotors with different tip swept angles(from 10° forward to 30° backward)are investigated.The results are evaluated through pressure distribution and airloads variation,and some meaningful conclusions are drawn the moderated shock wave strength and pressure gradient caused by varied tip swept angle and structural properties.展开更多
Recent industrial explosions globally have intensified the focus in mechanical engineering on designing infras-tructure systems and networks capable of withstanding blast loading.Initially centered on high-profile fac...Recent industrial explosions globally have intensified the focus in mechanical engineering on designing infras-tructure systems and networks capable of withstanding blast loading.Initially centered on high-profile facilities such as embassies and petrochemical plants,this concern now extends to a wider array of infrastructures and facilities.Engineers and scholars increasingly prioritize structural safety against explosions,particularly to prevent disproportionate collapse and damage to nearby structures.Urbanization has further amplified the reliance on oil and gas pipelines,making them vital for urban life and prime targets for terrorist activities.Consequently,there is a growing imperative for computational engineering solutions to tackle blast loading on pipelines and mitigate associated risks to avert disasters.In this study,an empty pipe model was successfully validated under contact blast conditions using Abaqus software,a powerful tool in mechanical engineering for simulating blast effects on buried pipelines.Employing a Eulerian-Lagrangian computational fluid dynamics approach,the investigation extended to above-surface and below-surface blasts at standoff distances of 25 and 50 mm.Material descriptions in the numerical model relied on Abaqus’default mechanical models.Comparative analysis revealed varying pipe performance,with deformation decreasing as explosion-to-pipe distance increased.The explosion’s location relative to the pipe surface notably influenced deformation levels,a key finding highlighted in the study.Moreover,quantitative findings indicated varying ratios of plastic dissipation energy(PDE)for different blast scenarios compared to the contact blast(P0).Specifically,P1(25 mm subsurface blast)and P2(50 mm subsurface blast)showed approximately 24.07%and 14.77%of P0’s PDE,respectively,while P3(25 mm above-surface blast)and P4(50 mm above-surface blast)exhibited lower PDE values,accounting for about 18.08%and 9.67%of P0’s PDE,respectively.Utilising energy-absorbing materials such as thin coatings of ultra-high-strength concrete,metallic foams,carbon fiber-reinforced polymer wraps,and others on the pipeline to effectively mitigate blast damage is recommended.This research contributes to the advancement of mechanical engineering by providing insights and solutions crucial for enhancing the resilience and safety of underground pipelines in the face of blast events.展开更多
The paper is to introduce a computational methodology that is based on ordinary differential equations(ODE)solver for the structural systems adopted by a super tall building in its preliminary design stage so as to fa...The paper is to introduce a computational methodology that is based on ordinary differential equations(ODE)solver for the structural systems adopted by a super tall building in its preliminary design stage so as to facilitate the designers to adjust the dynamic properties of the adopted structural system.The construction of the study is composed by following aspects.The first aspect is the modelling of a structural system.As a typical example,a mega frame-core-tube structural system adopted by some famous super tall buildings such as Taipei 101 building,Shanghai World financial center,is employed to demonstrate the modelling of a computational model.The second aspect is the establishment of motion equations constituted by a group of ordinary differential equations for the analyses of free vibration and resonant response.The solutions of the motion equations(that constitutes the third aspect)resorted to ODE-solver technique.Finally,some valuable conclusions are summarized.展开更多
The data information transfer and time marching strategies between computational fluid dynamics （CFD） and computational structural dynamics （CSD） play crucial roles on the aeroelastic analysis in a time domain. An...The data information transfer and time marching strategies between computational fluid dynamics （CFD） and computational structural dynamics （CSD） play crucial roles on the aeroelastic analysis in a time domain. An improved CFD/CSD coupled system is designed, including an interpolation method and an improved loosely coupled algorithm. The interpolation method based on boundary element method （BEM） is developed to transfer aerodynamic loads and structural displacements between CFD and CSD grid systems, it can be universally used in fluid structural interaction solution by keeping energy conservation. The improved loosely coupled algo-rithm is designed, thus it improves the computational accuracy and efficiency. The new interface is performed on the two-dimensional （2-D） extrapolation and the aeroelastie response of AGARD445.6 wing. Results show that the improved interface has a superior accuracy.展开更多
基于Reynolds average Navier-Stockes(RANS)的三维Navier-Stokes流场控制方程耦合结构静力学方程时域分析方法,研究了带有发动机的民用飞机其动力效应对全机气动性能的影响。首先采用数值方法对发动机进排气边界条件进行了模拟,分析了...基于Reynolds average Navier-Stockes(RANS)的三维Navier-Stokes流场控制方程耦合结构静力学方程时域分析方法,研究了带有发动机的民用飞机其动力效应对全机气动性能的影响。首先采用数值方法对发动机进排气边界条件进行了模拟,分析了带动力的涡扇发动机模型的流场,并将计算结果与实验进行比较,验证边界条件处理的准确性;以此为基础,考虑结构弹性变形,采用计算流体动力学/计算结构动力学(CFD/CSD)耦合的方法,分别对通气和带动力的翼吊发动机全机的气动性能进行了研究。结果表明:基于通气构型预测的升阻力系数,气动载荷和压心位置与考虑动力效应后的计算结果存在明显不同。弹性变形又会加剧这一差异,使得全机的升阻比下降约12.6%,升力系数下降约8.9%,压心位置后移。数值算例显示,在靠近发动机区域气动载荷受动力效应影响显著,远离该区域,弹性变形效应占主要影响因素,因此在进行带动力效应的民机气动性能分析时,考虑弹性变形的影响是十分必要的。展开更多
Based on the Fluent numerical simulation method,this study systematically analyzed the structural parameters of the spiral tube heat exchanger and the influence of the external baffle on its heat transfer performance....Based on the Fluent numerical simulation method,this study systematically analyzed the structural parameters of the spiral tube heat exchanger and the influence of the external baffle on its heat transfer performance.The results show that when the equivalent diameter of the spiral tube increased from 16.68 to 21.23 mm,its surface heat transfer coefficient decreased from 22,040 to 17,230 W/m^(2)⋅K,and the outlet air temperature dropped from 822.3 to 807.3 K.However,the pressure loss decreased from 2.692 to 0.958 kPa.which reveals the contradiction between the heat transfer efficiency and the flow resistance.By adding a baffle to enhance the turbulent disturbance,the wall heat flux density is increased by 21.17%,the surface heat transfer coefficient is increased by 12.1%,and the outlet temperature is optimized,which verifies the significant improvement of the heat transfer performance by the countercurrent design.Comprehensive research shows that the collaborative optimization of spiral tube equivalent diameter parameters and baffle flow control is the key to improve the comprehensive performance of heat exchanger.Theresearch results provide a theoretical basis for energy-saving design of industrial heat exchangers.展开更多
An advanced airload and noise prediction method based on computational fluid dynamics/computational structural dynamics(CFD/CSD)coupling for helicopter rotor has been developed in this paper.In the present method,Navi...An advanced airload and noise prediction method based on computational fluid dynamics/computational structural dynamics(CFD/CSD)coupling for helicopter rotor has been developed in this paper.In the present method,Navier-Stokes equation is applied as the governing equation,and a moving overset grid system is generated in order to account for the blade motions in rotation,flapping and pitching.The blade structural analysis is based on 14-DOF Euler beam model,and the finite element discretization is conducted on Hamilton′s variational principle and moderate deflection theory.Aerodynamic noise is calculated by Farassat 1 Aformula derived from FW-H equation.Using the developed method,numerical example of UH-60 Ais performed for aeroelastic loads calculation in a low-speed forward flight,and the calculated results are compared with both those from isolated CFD method and available experimental data.Then,rotor noise is emphatically calculated by CFD/CSD coupling method and compared with the isolated CFD method.The results show that the aerodynamic loads calculated from CFD/CSD method are more satisfactory than those from isolated CFD method,and the exclusion of blade structural deformation in rotor noise calculation may cause inaccurate results in low-speed forward flight state.展开更多
In rotor dynamics,blades are normally modelled as a slender beam,in which elastic deformations are coupled with each other.To identify these coupling effects,new rigid-flexible structural model for helicopter rotor sy...In rotor dynamics,blades are normally modelled as a slender beam,in which elastic deformations are coupled with each other.To identify these coupling effects,new rigid-flexible structural model for helicopter rotor system is proposed in this paper.Finite rotations of the whole blade(on flapwise,lagwise,and torsional)are described as three global rigid degrees of freedom.The nonlinear deformation geometrics of the beam is built on geometrically exact beam theory.New expressions for blade strain energy,kinetic energy,and virtual work of various kinds of external forces are derived as functions of finite rotations and elastic deformations.To quantify the coupling characteristics,following the definition of coupling factor in electromagnetics,a new coupling factor between two modal components on each mode is introduced in modal analysis.Simulations show that the new structural model is highly capable of solving static and dynamic problems in rotor system and the maximum deformation that moderate deformation beam theory can predict might be 15%of beam length.After the new coupling factor is applied to study structurally coupled characteristics of rotor blade,it can be concluded that closeness of natural frequencies likely indicates considerable coupling between corresponding DOFs in structure.展开更多
基金Supported by the National Natural Science Foundation of China(21677018)Jointly Projects of Beijing Natural Science Foundation and Beijing Municipal Education Commission(KZ201810017024)
文摘It is generally recognized that internal-loop reactors are well-developed mass and heat-transfer multiphase flow reactors. However, the internal flow field in the internal-loop reactor is influenced by the structure parameter of the reactor, which has a great effect on the reaction efficiency. In this study, the computational fluid dynamics simulation method was used to determine the influence of reactor structure on flow field, and a volume-offluid model was employed to simulate the gas–liquid, two-phase flow of the internal-loop micro-electrolysis reactor. Hydrodynamic factors were optimized when the height-to-diameter ratio was 4:1, diameter ratio was9:1, draft-tube axial height was 90 mm. Three-dimensional simulations for the water distributor were carried out, and the results suggested that the optimal conditions are as follows: the number of water distribution pipes was four, and an inhomogeneous water distribution was used. According to the results of the simulation,the suitable structure can be used to achieve good fluid mechanical properties, such as the good liquid circulation velocity and gas holdup, which provides a good theoretical foundation for the application of the reactor.
基金supported in part by the National Natural Science Foundation of China (Grants 11290150 and 11290151)
文摘Soft machine refers to a kind of mechanical system made of soft materials to complete sophisticated missions, such as handling a fragile object and crawling along a narrow tunnel corner, under low cost control and actuation. Hence, soft machines have raised great challenges to computational dynamics. In this review article, recent studies of the authors on the dynamic modeling, numerical simulation, and experimental validation of soft machines are summarized in the framework of multibody system dynamics. The dynamic modeling approaches are presented first for the geometric nonlinearities of coupled overall motions and large deformations of a soft component, the physical nonlinearities of a soft component made of hyperelastic or elastoplastic materials, and the frictional contacts/impacts of soft components, respectively. Then the computation approach is outlined for the dynamic simulation of soft machines governed by a set of differential-algebraic equations of very high dimensions, with an emphasis on the efficient computations of the nonlinear elastic force vector of finite elements. The validations of the proposed approaches are given via three case studies, including the locomotion of a soft quadrupedal robot, the spinning deployment of a solar sail of a spacecraft, and the deployment of a mesh reflector of a satellite antenna, as well as the corresponding experimental studies. Finally, some remarks are made for future studies.
基金Supported by the Major State Basic Research Development Program of China(2011CB706501)the National Natural Science Foundation of China(51276157)
文摘Characterizing the complex two-phase hydrodynamics in structured packed columns requires a power- ful modeling tool. The traditional two-dimensional model exhibits limitations when one attempts to model the de- tailed two-phase flow inside the columns. The present paper presents a three-dimensional computational fluid dy- namics （CFD） model to simulate the two-phase flow in a representative unit of the column. The unit consists of an CFD calculations on column packed with Flexipak 1Y were implemented within the volume of fluid （VOF） mathe- matical framework. The CFD model was validated by comparing the calculated thickness of liquid film with the available experimental data. Special attention was given to quantitative analysis of the effects of gravity on the hy- drodynamics. Fluctuations in the liquid mass flow rate and the calculated pressure drop loss were found to be quali- tatively in agreement with the experimental observations.
基金supported by National Hi-tech Research and Development Program of China (863 Program, Grant No. 2009AA04Z413)Zhejiang Provincial Natural Science Foundation of China (Grant No. Y1110109)
文摘Journal bearings are important parts to keep the high dynamic performance of rotor machinery. Some methods have already been proposed to analysis the flow field of journal bearings, and in most of these methods simplified physical model and classic Reynolds equation are always applied. While the application of the general computational fluid dynamics （CFD）-fluid structure interaction （FSI） techniques is more beneficial for analysis of the fluid field in a journal bearing when more detailed solutions are needed. This paper deals with the quasi-coupling calculation of transient fluid dynamics of oil film in journal bearings and rotor dynamics with CFD-FSI techniques. The fluid dynamics of oil film is calculated by applying the so-called ＂dynamic mesh＂ technique. A new mesh movement approacb is presented while the dynamic mesh models provided by FLUENT are not suitable for the transient oil flow in journal bearings. The proposed mesh movement approach is based on the structured mesh. When the joumal moves, the movement distance of every grid in the flow field of bearing can be calculated, and then the update of the volume mesh can be handled automatically by user defined function （UDF）. The journal displacement at each time step is obtained by solving the moving equations of the rotor-bearing system under the known oil film force condition. A case study is carried out to calculate the locus of the journal center and pressure distribution of the journal in order to prove the feasibility of this method. The calculating results indicate that the proposed method can predict the transient flow field of a journal bearing in a rotor-bearing system where more realistic models are involved. The presented calculation method provides a basis for studying the nonlinear dynamic behavior of a general rotor-bearing system.
文摘For accurate aeroelastic analysis,the unsteady rotor flowfield is solved by computational fluid dynamics(CFD)module based on RANS/Euler equations and moving-embedded grid system,while computational structural dynamics(CSD)module is introduced to handle blade flexibility.In CFD module,dual time-stepping algorithm is employed in temporal discretization,Jameson two-order central difference(JST)scheme is adopted in spatial discretization and B-L turbulent model is used to illustrate the viscous effect.The CSD module is developed based on Hamilton′s variational principles and moderate deflection beam theory.Grid deformation is implemented using algebraic method through coordinate transformations to achieve deflections with high quality and efficiency.A CFD/CSD loose coupling strategy is developed to transfer information between rotor flowfield and blade structure.The CFD and the CSD modules are verified seperately.Then the CFD/CSD loose coupling is adopted in airloads prediction of UH-60A rotor under high speed forward flight condition.The calculated results agree well with test data.Finally,effects of torsional stiffness properties on airloads of rotors with different tip swept angles(from 10° forward to 30° backward)are investigated.The results are evaluated through pressure distribution and airloads variation,and some meaningful conclusions are drawn the moderated shock wave strength and pressure gradient caused by varied tip swept angle and structural properties.
文摘Recent industrial explosions globally have intensified the focus in mechanical engineering on designing infras-tructure systems and networks capable of withstanding blast loading.Initially centered on high-profile facilities such as embassies and petrochemical plants,this concern now extends to a wider array of infrastructures and facilities.Engineers and scholars increasingly prioritize structural safety against explosions,particularly to prevent disproportionate collapse and damage to nearby structures.Urbanization has further amplified the reliance on oil and gas pipelines,making them vital for urban life and prime targets for terrorist activities.Consequently,there is a growing imperative for computational engineering solutions to tackle blast loading on pipelines and mitigate associated risks to avert disasters.In this study,an empty pipe model was successfully validated under contact blast conditions using Abaqus software,a powerful tool in mechanical engineering for simulating blast effects on buried pipelines.Employing a Eulerian-Lagrangian computational fluid dynamics approach,the investigation extended to above-surface and below-surface blasts at standoff distances of 25 and 50 mm.Material descriptions in the numerical model relied on Abaqus’default mechanical models.Comparative analysis revealed varying pipe performance,with deformation decreasing as explosion-to-pipe distance increased.The explosion’s location relative to the pipe surface notably influenced deformation levels,a key finding highlighted in the study.Moreover,quantitative findings indicated varying ratios of plastic dissipation energy(PDE)for different blast scenarios compared to the contact blast(P0).Specifically,P1(25 mm subsurface blast)and P2(50 mm subsurface blast)showed approximately 24.07%and 14.77%of P0’s PDE,respectively,while P3(25 mm above-surface blast)and P4(50 mm above-surface blast)exhibited lower PDE values,accounting for about 18.08%and 9.67%of P0’s PDE,respectively.Utilising energy-absorbing materials such as thin coatings of ultra-high-strength concrete,metallic foams,carbon fiber-reinforced polymer wraps,and others on the pipeline to effectively mitigate blast damage is recommended.This research contributes to the advancement of mechanical engineering by providing insights and solutions crucial for enhancing the resilience and safety of underground pipelines in the face of blast events.
基金Acknowledgment The research work was financially supported both by the Natural Science Foundation of China(51178164)and the Priority Discipline Foundation of Henan Province(507909).
文摘The paper is to introduce a computational methodology that is based on ordinary differential equations(ODE)solver for the structural systems adopted by a super tall building in its preliminary design stage so as to facilitate the designers to adjust the dynamic properties of the adopted structural system.The construction of the study is composed by following aspects.The first aspect is the modelling of a structural system.As a typical example,a mega frame-core-tube structural system adopted by some famous super tall buildings such as Taipei 101 building,Shanghai World financial center,is employed to demonstrate the modelling of a computational model.The second aspect is the establishment of motion equations constituted by a group of ordinary differential equations for the analyses of free vibration and resonant response.The solutions of the motion equations(that constitutes the third aspect)resorted to ODE-solver technique.Finally,some valuable conclusions are summarized.
基金Supported by the Ph.D.Program Foundation of Ministry of Education of China (20070699054)~~
文摘The data information transfer and time marching strategies between computational fluid dynamics （CFD） and computational structural dynamics （CSD） play crucial roles on the aeroelastic analysis in a time domain. An improved CFD/CSD coupled system is designed, including an interpolation method and an improved loosely coupled algorithm. The interpolation method based on boundary element method （BEM） is developed to transfer aerodynamic loads and structural displacements between CFD and CSD grid systems, it can be universally used in fluid structural interaction solution by keeping energy conservation. The improved loosely coupled algo-rithm is designed, thus it improves the computational accuracy and efficiency. The new interface is performed on the two-dimensional （2-D） extrapolation and the aeroelastie response of AGARD445.6 wing. Results show that the improved interface has a superior accuracy.
文摘基于Reynolds average Navier-Stockes(RANS)的三维Navier-Stokes流场控制方程耦合结构静力学方程时域分析方法,研究了带有发动机的民用飞机其动力效应对全机气动性能的影响。首先采用数值方法对发动机进排气边界条件进行了模拟,分析了带动力的涡扇发动机模型的流场,并将计算结果与实验进行比较,验证边界条件处理的准确性;以此为基础,考虑结构弹性变形,采用计算流体动力学/计算结构动力学(CFD/CSD)耦合的方法,分别对通气和带动力的翼吊发动机全机的气动性能进行了研究。结果表明:基于通气构型预测的升阻力系数,气动载荷和压心位置与考虑动力效应后的计算结果存在明显不同。弹性变形又会加剧这一差异,使得全机的升阻比下降约12.6%,升力系数下降约8.9%,压心位置后移。数值算例显示,在靠近发动机区域气动载荷受动力效应影响显著,远离该区域,弹性变形效应占主要影响因素,因此在进行带动力效应的民机气动性能分析时,考虑弹性变形的影响是十分必要的。
基金supported by the Jing-Jin-Ji Regional Integrated Environmental Improvement-National Science and Technology Major Project(No.2024ZD1200400).
文摘Based on the Fluent numerical simulation method,this study systematically analyzed the structural parameters of the spiral tube heat exchanger and the influence of the external baffle on its heat transfer performance.The results show that when the equivalent diameter of the spiral tube increased from 16.68 to 21.23 mm,its surface heat transfer coefficient decreased from 22,040 to 17,230 W/m^(2)⋅K,and the outlet air temperature dropped from 822.3 to 807.3 K.However,the pressure loss decreased from 2.692 to 0.958 kPa.which reveals the contradiction between the heat transfer efficiency and the flow resistance.By adding a baffle to enhance the turbulent disturbance,the wall heat flux density is increased by 21.17%,the surface heat transfer coefficient is increased by 12.1%,and the outlet temperature is optimized,which verifies the significant improvement of the heat transfer performance by the countercurrent design.Comprehensive research shows that the collaborative optimization of spiral tube equivalent diameter parameters and baffle flow control is the key to improve the comprehensive performance of heat exchanger.Theresearch results provide a theoretical basis for energy-saving design of industrial heat exchangers.
基金supported by Funding of Jiangsu Innovation Program for Graduate Education(No.KYLX16_ 0389)
文摘An advanced airload and noise prediction method based on computational fluid dynamics/computational structural dynamics(CFD/CSD)coupling for helicopter rotor has been developed in this paper.In the present method,Navier-Stokes equation is applied as the governing equation,and a moving overset grid system is generated in order to account for the blade motions in rotation,flapping and pitching.The blade structural analysis is based on 14-DOF Euler beam model,and the finite element discretization is conducted on Hamilton′s variational principle and moderate deflection theory.Aerodynamic noise is calculated by Farassat 1 Aformula derived from FW-H equation.Using the developed method,numerical example of UH-60 Ais performed for aeroelastic loads calculation in a low-speed forward flight,and the calculated results are compared with both those from isolated CFD method and available experimental data.Then,rotor noise is emphatically calculated by CFD/CSD coupling method and compared with the isolated CFD method.The results show that the aerodynamic loads calculated from CFD/CSD method are more satisfactory than those from isolated CFD method,and the exclusion of blade structural deformation in rotor noise calculation may cause inaccurate results in low-speed forward flight state.
文摘In rotor dynamics,blades are normally modelled as a slender beam,in which elastic deformations are coupled with each other.To identify these coupling effects,new rigid-flexible structural model for helicopter rotor system is proposed in this paper.Finite rotations of the whole blade(on flapwise,lagwise,and torsional)are described as three global rigid degrees of freedom.The nonlinear deformation geometrics of the beam is built on geometrically exact beam theory.New expressions for blade strain energy,kinetic energy,and virtual work of various kinds of external forces are derived as functions of finite rotations and elastic deformations.To quantify the coupling characteristics,following the definition of coupling factor in electromagnetics,a new coupling factor between two modal components on each mode is introduced in modal analysis.Simulations show that the new structural model is highly capable of solving static and dynamic problems in rotor system and the maximum deformation that moderate deformation beam theory can predict might be 15%of beam length.After the new coupling factor is applied to study structurally coupled characteristics of rotor blade,it can be concluded that closeness of natural frequencies likely indicates considerable coupling between corresponding DOFs in structure.
