In order to enhance the off-peak performance of gas turbine combined cycle(GTCC)units,a novel collaborative power generation system(CPG)was proposed.During off-peak operation periods,the remaining power of the GTCC wa...In order to enhance the off-peak performance of gas turbine combined cycle(GTCC)units,a novel collaborative power generation system(CPG)was proposed.During off-peak operation periods,the remaining power of the GTCC was used to drive the adiabatic compressed air energy storage(ACAES),while the intake air of the GTCC was heated by the compression heat of theACAES.Based on a 67.3MW GTCC,under specific demand load distribution,a CPG system and a benchmark system(BS)were designed,both of which used 9.388% of the GTCC output power to drive the ACAES.The performance of the CPG and the BS without intake air heating was compared.The results show that the load rate of the GTCC in the CPG system during off-peak periods is significantly enhanced,and the average operating efficiency of the GTCC is increased by 1.19 percentage points.However,in the BS system,due to the single collaborativemethod of load shifting,the GTCC operative efficiency is almost increased by 1.00 percentage points under different ambient temperatures.In a roundtrip cycle at an ambient temperature of 288.15K,the systemefficiency of the CPG reaches 0.5010,which is 0.62 percentage points higher than the operative efficiency of 0.4948 in the standalone GTCC;while the system efficiency of the BS is slightly inferior to that of the standalone GTCC.The findings confirm the technical feasibility and performance improvement of the ACAES-GTCC collaborative power generation system.展开更多
This paper presents comparative numerical studies to investigate the effects of blade sweep on inlet flow in axial compressor cascades. A series of swept and straight cascades was modeled in order to obtain a general ...This paper presents comparative numerical studies to investigate the effects of blade sweep on inlet flow in axial compressor cascades. A series of swept and straight cascades was modeled in order to obtain a general understanding of the inlet flow field that is induced by sweep.A computational fluid dynamics（CFD） package was used to simulate the cascades and obtain the required three-dimensional（3D） flow parameters. A circumferentially averaged method was introduced which provided the circumferential fluctuation（CF） terms in the momentum equation.A program for data reduction was conducted to obtain a circumferentially averaged flow field.The influences of the inlet flow fields of the cascades were studied and spanwise distributions of each term in the momentum equation were analyzed. The results indicate that blade sweep does affect inlet radial equilibrium. The characteristic of radial fluid transfer is changed and thus influencing the axial velocity distributions. The inlet flow field varies mainly due to the combined effect of the radial pressure gradient and the CF component. The axial velocity varies consistently with the incidence variation induced by the sweep, as observed in the previous literature. In addition, factors that might influence the radial equilibrium such as blade camber angles, solidity and the effect of the distance from the leading edge are also taken into consideration and comparatively analyzed.展开更多
In this paper,a high-order distortion model is proposed for analyzing the rotating stall inception process induced by inlet distortion in axial compressors.A distortion-generating screen in the compressor inlet is con...In this paper,a high-order distortion model is proposed for analyzing the rotating stall inception process induced by inlet distortion in axial compressors.A distortion-generating screen in the compressor inlet is considered.By assuming a quadratic function for the local flow total pressure-drop,the existing Mansoux model is extended to include the effects of static inlet distortion,and a new high-order distortion model is derived.To illustrate the effectiveness of the distortion model,numerical simulations are performed on an eighteenth-order model.It is demonstrated that long length-scale disturbances emerge out of the distorted background flow,and further induce the onset of rotating stall in advance.In addition,the circumferential non-uniform distribution and time evolution of the axial flow are also shown to be consistent with the existing features.It is thus shown that the high-order distortion model is capable of describing the transient behavior of stall inception and will contribute further to stall detection under inlet distortion.展开更多
On the base of an assumed steady inlet circumferential total pressure distortion, three-dimensional time-dependent numerical simulations are conducted on an axial flow subsonic compressor rotor. The performances and f...On the base of an assumed steady inlet circumferential total pressure distortion, three-dimensional time-dependent numerical simulations are conducted on an axial flow subsonic compressor rotor. The performances and flow fields of a compressor rotor, either casing treated or untreated, are investigated in detail either with or without inlet pressure distortion. Results show that the circumferential groove casing treatment can expand the operating range of the compressor rotor either with or without inlet pressure distortion at the expense of a drop in peak isentropic efficiency. The casing treatment is capable of weakening or even removing the tip leakage vortex effectively either with or without inlet distortion. In clean inlet circumstances, the enhancement and forward movement of tip leakage vortex cause the untreated compressor rotor to stall. By contrast, with circumferential groove casing, the serious flow separation on the suction surface leads to aerodynamic stalling eventually. In the presence of inlet pressure distortion, the blade loading changes from passage to passage as the distorted inflow sector is traversed. Similar to the clean inlet circumstances, with a smooth wall casing, the enhancement and forward movement of tip leakage vortex are still the main factors which lead to the compressor rotor stalling eventually. When the rotor works trader near stall conditions, the blockage resulting from the tip leakage vortex in all the passages is very serious. Especially in several passages, flow-spillage is observed. Compared to the clean inlet circumstances, circumferential groove casing treatment can also eliminate the low energy zone in the outer end wall region effectively.展开更多
The circumferentially averaged equation of the inlet flow radial equilibrium in axial compressor was deduced. It indicates that the blade inlet radial pressure gradient is closely related to the radial component of th...The circumferentially averaged equation of the inlet flow radial equilibrium in axial compressor was deduced. It indicates that the blade inlet radial pressure gradient is closely related to the radial component of the circumferential fluctuation（CF） source item. Several simplified cascades with/without aerodynamic loading were numerically studied to investigate the effects of blade bowing on the inlet flow radial equilibrium. A data reduction program was conducted to obtain the CF source from three-dimensional（3D） simulation results. Flow parameters at the passage inlet were focused on and each term in the radial equilibrium equation was discussed quantitatively. Results indicate that the inviscid blade force is the inducement of the inlet CF due to geometrical asymmetry. Blade bowing induces variation of the inlet CF, thus changes the radial pressure gradient and leads to flow migration before leading edge（LE） in the cascades. Positive bowing drives the inlet flow to migrate from end walls to mid-span and negative bowing turns it to the reverse direction to build a new equilibrium. In addition, comparative studies indicate that the inlet Mach number and blade loading can efficiently impact the effectiveness of blade bowing on radial equilibrium in compressor design.展开更多
The inlet-air distortion which was caused by high angle-of-attack flight was simulated by plugboard.Experiments were conducted on a transonic axial-flow compressor's rotor at 98% rotating speed.The flow-field char...The inlet-air distortion which was caused by high angle-of-attack flight was simulated by plugboard.Experiments were conducted on a transonic axial-flow compressor's rotor at 98% rotating speed.The flow-field characteristics and mechanism of performance degradation were analyzed in detail.The compressor inlet was divided into four sectors at circumference under inlet-air distortion.They were undistorted sector,transition sector A where the rotor was rotating into the distortion sector,distorted sector and transition sector B where the rotor was rotating out of the distortion sector.The experimental results show that compared with undistorted sector,there is a subsonic flow in transition sector A,so the pressure ratio is decreased by a large margin in this sector.However,the shock wave is enhanced in distortion sector and transition sector B,and thus the pressure ratio increases in these sectors.Because of the different works at circumference,the phase angle of total pressure changes 90° when the inlet total pressure distortion passes through compressor rotor.In addition,the frequency and amplitude of disturbances in front of the rotor strengthenes under inlet distortion,so the unstable flow would take place in advance.In addition,the position of stall inception is in one of the transition sectors.展开更多
Inlet recirculation is proved as an effective way for centrifugal compressor surge margin extension,and is successively used in some engineering applications.Unfortunately its working mechanism is still not being well...Inlet recirculation is proved as an effective way for centrifugal compressor surge margin extension,and is successively used in some engineering applications.Unfortunately its working mechanism is still not being well understood,which leads to redesigning of inlet recirculation mostly by experience.Also,most study about inlet recirculation is steady to date.It is necessary to study surge margin extension mechanism about inlet recirculation.To expose the mechanism in detail,steady and unsteady numerical simulations were performed on a centrifugal compressor with and without inlet recirculation.The results showed that,with inlet recirculation,the inlet axial velocity is augmented,relative Mach number around blade tip leading edge area is significantly reduced and so is the flow angle.As the flow angle decreased,the incidence angle reduced which greatly improves the flow field inside the impeller.Moreover,inlet recirculation changes the blade loading around blade tip and restrains the flow separation on the blade suction side at the leading edge area.The unsteady results of static pressure around blade surface,entropy at inlet crossflow section and vorticity distributions at near tip span surface indicated that,at near stall condition,strong fluctuation exists in the vicinity of tip area due to the interaction between tip leakage flow and core flow.By inlet recirculation these strong flow fluctuations are eliminated so the flow stability is greatly enhanced.All these improvements mentioned above are the reason for inlet recirculation delays compressor stall.This research reveals the surge margin extension reason of inlet recirculation from an unsteady flow viewpoint and provides important reference for inlet recirculation structure design.展开更多
The present work is about the stall margin enhancement ability of a kind of stall precursor-suppressed（SPS） casing treatment when fan/compressor suffers from a radial total pressure inlet distortion.Experimental res...The present work is about the stall margin enhancement ability of a kind of stall precursor-suppressed（SPS） casing treatment when fan/compressor suffers from a radial total pressure inlet distortion.Experimental researches are conducted on a low-speed compressor with and without SPS casing treatment under radial distorted inlet flow of different levels as well as uniform inlet flow.The distorted flow fields of different levels are generated by annular distortion flow generators of different heights.The characteristic curves under these conditions are measured and analyzed.The results show that the radial inlet distortion could cause a stall margin loss from 2%to30%under different distorted levels.The SPS casing treatment could remedy this stall margin loss under small distortion level and only partly make up the stall margin loss caused by distortion in large level without leading to perceptible additional efficiency loss and obvious change of characteristic curves.The pre-stall behavior of the compressor is investigated to reveal the mechanism of this stall margin improvement ability of the SPS casing treatment.The results do show that this casing treatment delays the occurrence of rotating stall by weakening the pressure perturbations and suppressing the nonlinear amplification of the stall precursor waves in the compression system.展开更多
The structural and aerodynamic performance of the air inlet volute has an important influence on the performance of the gas turbine. On one hand, it requires the airflow flowing through inlet volute as even as possibl...The structural and aerodynamic performance of the air inlet volute has an important influence on the performance of the gas turbine. On one hand, it requires the airflow flowing through inlet volute as even as possible, in order to reduce the pressure loss, to avoid a decrease in the effective output power and an increase of the fuel consumption rate of the internal combustion engine which indicate the inefficiency of the entire power unit;On the other hand, it requires the size of the inlet volute to be as small as possible in order to save mounting space and production costs. The thesis builds the structure model and develops flow fields numerical simulation of several different sizes of the inlet volutes. Further, the unreasonable aerodynamic structure is improved according to the flow field characteristics and thereby, a better aerodynamic performance of the inlet volute is obtained.展开更多
文摘In order to enhance the off-peak performance of gas turbine combined cycle(GTCC)units,a novel collaborative power generation system(CPG)was proposed.During off-peak operation periods,the remaining power of the GTCC was used to drive the adiabatic compressed air energy storage(ACAES),while the intake air of the GTCC was heated by the compression heat of theACAES.Based on a 67.3MW GTCC,under specific demand load distribution,a CPG system and a benchmark system(BS)were designed,both of which used 9.388% of the GTCC output power to drive the ACAES.The performance of the CPG and the BS without intake air heating was compared.The results show that the load rate of the GTCC in the CPG system during off-peak periods is significantly enhanced,and the average operating efficiency of the GTCC is increased by 1.19 percentage points.However,in the BS system,due to the single collaborativemethod of load shifting,the GTCC operative efficiency is almost increased by 1.00 percentage points under different ambient temperatures.In a roundtrip cycle at an ambient temperature of 288.15K,the systemefficiency of the CPG reaches 0.5010,which is 0.62 percentage points higher than the operative efficiency of 0.4948 in the standalone GTCC;while the system efficiency of the BS is slightly inferior to that of the standalone GTCC.The findings confirm the technical feasibility and performance improvement of the ACAES-GTCC collaborative power generation system.
基金support of the National Natural Science Foundation of China(Grant Nos:51236001,51006005)
文摘This paper presents comparative numerical studies to investigate the effects of blade sweep on inlet flow in axial compressor cascades. A series of swept and straight cascades was modeled in order to obtain a general understanding of the inlet flow field that is induced by sweep.A computational fluid dynamics（CFD） package was used to simulate the cascades and obtain the required three-dimensional（3D） flow parameters. A circumferentially averaged method was introduced which provided the circumferential fluctuation（CF） terms in the momentum equation.A program for data reduction was conducted to obtain a circumferentially averaged flow field.The influences of the inlet flow fields of the cascades were studied and spanwise distributions of each term in the momentum equation were analyzed. The results indicate that blade sweep does affect inlet radial equilibrium. The characteristic of radial fluid transfer is changed and thus influencing the axial velocity distributions. The inlet flow field varies mainly due to the combined effect of the radial pressure gradient and the CF component. The axial velocity varies consistently with the incidence variation induced by the sweep, as observed in the previous literature. In addition, factors that might influence the radial equilibrium such as blade camber angles, solidity and the effect of the distance from the leading edge are also taken into consideration and comparatively analyzed.
基金co-supported by the National Major Scientific Instruments Development Project of China(No.61527811)the National Science Fund for Distinguished Young Scholars of China(No.61225014)+3 种基金the Guangdong Inovative Project(No.2013KJCX0009)the Guangdong Provice Natural Science Foundation(No.2014A030312005)the Guangdong Provice Key Laboratory of Biomedical Engineeringthe Space Intelligent Control Key Laboratory of Science and Technology for National Defense
文摘In this paper,a high-order distortion model is proposed for analyzing the rotating stall inception process induced by inlet distortion in axial compressors.A distortion-generating screen in the compressor inlet is considered.By assuming a quadratic function for the local flow total pressure-drop,the existing Mansoux model is extended to include the effects of static inlet distortion,and a new high-order distortion model is derived.To illustrate the effectiveness of the distortion model,numerical simulations are performed on an eighteenth-order model.It is demonstrated that long length-scale disturbances emerge out of the distorted background flow,and further induce the onset of rotating stall in advance.In addition,the circumferential non-uniform distribution and time evolution of the axial flow are also shown to be consistent with the existing features.It is thus shown that the high-order distortion model is capable of describing the transient behavior of stall inception and will contribute further to stall detection under inlet distortion.
基金National Natural Science Foundation of China (10377013)
文摘On the base of an assumed steady inlet circumferential total pressure distortion, three-dimensional time-dependent numerical simulations are conducted on an axial flow subsonic compressor rotor. The performances and flow fields of a compressor rotor, either casing treated or untreated, are investigated in detail either with or without inlet pressure distortion. Results show that the circumferential groove casing treatment can expand the operating range of the compressor rotor either with or without inlet pressure distortion at the expense of a drop in peak isentropic efficiency. The casing treatment is capable of weakening or even removing the tip leakage vortex effectively either with or without inlet distortion. In clean inlet circumstances, the enhancement and forward movement of tip leakage vortex cause the untreated compressor rotor to stall. By contrast, with circumferential groove casing, the serious flow separation on the suction surface leads to aerodynamic stalling eventually. In the presence of inlet pressure distortion, the blade loading changes from passage to passage as the distorted inflow sector is traversed. Similar to the clean inlet circumstances, with a smooth wall casing, the enhancement and forward movement of tip leakage vortex are still the main factors which lead to the compressor rotor stalling eventually. When the rotor works trader near stall conditions, the blockage resulting from the tip leakage vortex in all the passages is very serious. Especially in several passages, flow-spillage is observed. Compared to the clean inlet circumstances, circumferential groove casing treatment can also eliminate the low energy zone in the outer end wall region effectively.
基金supported by the National Natural Science Foundation of China (Nos.51236001,51006005)the National Basic Research Program of China (No. 2012CB720201)Beijing Natural Science Foundation (No. 3151002)
文摘The circumferentially averaged equation of the inlet flow radial equilibrium in axial compressor was deduced. It indicates that the blade inlet radial pressure gradient is closely related to the radial component of the circumferential fluctuation（CF） source item. Several simplified cascades with/without aerodynamic loading were numerically studied to investigate the effects of blade bowing on the inlet flow radial equilibrium. A data reduction program was conducted to obtain the CF source from three-dimensional（3D） simulation results. Flow parameters at the passage inlet were focused on and each term in the radial equilibrium equation was discussed quantitatively. Results indicate that the inviscid blade force is the inducement of the inlet CF due to geometrical asymmetry. Blade bowing induces variation of the inlet CF, thus changes the radial pressure gradient and leads to flow migration before leading edge（LE） in the cascades. Positive bowing drives the inlet flow to migrate from end walls to mid-span and negative bowing turns it to the reverse direction to build a new equilibrium. In addition, comparative studies indicate that the inlet Mach number and blade loading can efficiently impact the effectiveness of blade bowing on radial equilibrium in compressor design.
基金National Natural Science Foundation of China(50906001)
文摘The inlet-air distortion which was caused by high angle-of-attack flight was simulated by plugboard.Experiments were conducted on a transonic axial-flow compressor's rotor at 98% rotating speed.The flow-field characteristics and mechanism of performance degradation were analyzed in detail.The compressor inlet was divided into four sectors at circumference under inlet-air distortion.They were undistorted sector,transition sector A where the rotor was rotating into the distortion sector,distorted sector and transition sector B where the rotor was rotating out of the distortion sector.The experimental results show that compared with undistorted sector,there is a subsonic flow in transition sector A,so the pressure ratio is decreased by a large margin in this sector.However,the shock wave is enhanced in distortion sector and transition sector B,and thus the pressure ratio increases in these sectors.Because of the different works at circumference,the phase angle of total pressure changes 90° when the inlet total pressure distortion passes through compressor rotor.In addition,the frequency and amplitude of disturbances in front of the rotor strengthenes under inlet distortion,so the unstable flow would take place in advance.In addition,the position of stall inception is in one of the transition sectors.
文摘Inlet recirculation is proved as an effective way for centrifugal compressor surge margin extension,and is successively used in some engineering applications.Unfortunately its working mechanism is still not being well understood,which leads to redesigning of inlet recirculation mostly by experience.Also,most study about inlet recirculation is steady to date.It is necessary to study surge margin extension mechanism about inlet recirculation.To expose the mechanism in detail,steady and unsteady numerical simulations were performed on a centrifugal compressor with and without inlet recirculation.The results showed that,with inlet recirculation,the inlet axial velocity is augmented,relative Mach number around blade tip leading edge area is significantly reduced and so is the flow angle.As the flow angle decreased,the incidence angle reduced which greatly improves the flow field inside the impeller.Moreover,inlet recirculation changes the blade loading around blade tip and restrains the flow separation on the blade suction side at the leading edge area.The unsteady results of static pressure around blade surface,entropy at inlet crossflow section and vorticity distributions at near tip span surface indicated that,at near stall condition,strong fluctuation exists in the vicinity of tip area due to the interaction between tip leakage flow and core flow.By inlet recirculation these strong flow fluctuations are eliminated so the flow stability is greatly enhanced.All these improvements mentioned above are the reason for inlet recirculation delays compressor stall.This research reveals the surge margin extension reason of inlet recirculation from an unsteady flow viewpoint and provides important reference for inlet recirculation structure design.
基金supported by National Natural Science Foundation of China(51236001 and 51576008)National Basic Research Program of China(2012CB720201)+1 种基金Aeronautical Science Foundation of China(2014ZB51018)Fundamental Research Funds for the Central Universities
文摘The present work is about the stall margin enhancement ability of a kind of stall precursor-suppressed（SPS） casing treatment when fan/compressor suffers from a radial total pressure inlet distortion.Experimental researches are conducted on a low-speed compressor with and without SPS casing treatment under radial distorted inlet flow of different levels as well as uniform inlet flow.The distorted flow fields of different levels are generated by annular distortion flow generators of different heights.The characteristic curves under these conditions are measured and analyzed.The results show that the radial inlet distortion could cause a stall margin loss from 2%to30%under different distorted levels.The SPS casing treatment could remedy this stall margin loss under small distortion level and only partly make up the stall margin loss caused by distortion in large level without leading to perceptible additional efficiency loss and obvious change of characteristic curves.The pre-stall behavior of the compressor is investigated to reveal the mechanism of this stall margin improvement ability of the SPS casing treatment.The results do show that this casing treatment delays the occurrence of rotating stall by weakening the pressure perturbations and suppressing the nonlinear amplification of the stall precursor waves in the compression system.
文摘The structural and aerodynamic performance of the air inlet volute has an important influence on the performance of the gas turbine. On one hand, it requires the airflow flowing through inlet volute as even as possible, in order to reduce the pressure loss, to avoid a decrease in the effective output power and an increase of the fuel consumption rate of the internal combustion engine which indicate the inefficiency of the entire power unit;On the other hand, it requires the size of the inlet volute to be as small as possible in order to save mounting space and production costs. The thesis builds the structure model and develops flow fields numerical simulation of several different sizes of the inlet volutes. Further, the unreasonable aerodynamic structure is improved according to the flow field characteristics and thereby, a better aerodynamic performance of the inlet volute is obtained.
