Strain effects have garnered significant attention in catalytic applications due to their ability to modulate the electronic structure and surface adsorption properties of catalysts.In this study,we propose a novel ap...Strain effects have garnered significant attention in catalytic applications due to their ability to modulate the electronic structure and surface adsorption properties of catalysts.In this study,we propose a novel approach called“similar stacking”for stress modulation,achieved through the loading of Co_(2)P on Ni_(2)P(Ni_(2)P/Co_(2)P).Theoretical simulations reveal that the compressive strain induced by Co_(2)P influences orbital overlap and electron transfer with hydrogen atoms.Furthermore,the number of stacked layers can be adjusted by varying the precursor soaking time,which further modulates the strain range and hydrogen adsorption.Under a 2-h soaking condition,the strain effect proves favorable for efficient hydrogen production.Experimental characterizations using X-ray diffraction,high-angel annular dark-field scanning transmission election microscope(HAADF-STEM),and X-ray absorption near-edge structure spectroscopy successfully demonstrate lattice contraction of Co_(2)P and bond length shortening of Co-P.Remarkably,our catalyst shows an ultrahigh current density of 1 A cm^(-2) at an overpotential of only 388 mV,surpassing that of commercial Pt/C,while maintaining long-term stability.This material design strategy of similar stacking opens up new avenues of strain modulation and the deeper development of electrocatalysts.展开更多
A dent is a common type of defects for submarine pipeline.For submarine pipelines,high hydrostatic pressure and internal pressure are the main loads.Once pipelines bend due to complex subsea conditions,the compression...A dent is a common type of defects for submarine pipeline.For submarine pipelines,high hydrostatic pressure and internal pressure are the main loads.Once pipelines bend due to complex subsea conditions,the compression strain capacity may be exceeded.Research into the local buckling failure and accurate prediction of the compressive strain capacity are important.A finite element model of a pipeline with a dent is established.Local buckling failure under a bending moment is investigated,and the compressive strain capacity is calculated.The effects of different parameters on pipeline local buckling are analyzed.The results show that the dent depth,external pressure and internal pressure lead to different local buckling failure modes of the pipeline.A higher internal pressure indicates a larger compressive strain capacity,and the opposite is true for external pressure.When the ratio of external pressure to collapse pressure of intact pipeline is greater than 0.1,the deeper the dent,the greater the compressive strain capacity of the pipeline.And as the ratio is less than 0.1,the opposite is true.On the basis of these results,a regression equation for predicting the compressive strain capacity of a dented submarine pipeline is proposed,which can be referred to during the integrity assessment of a submarine pipeline.展开更多
In order to investigate the influence of compressive strain on indium incorporation in In Al N and In Ga N ternary nitrides, In Al N/Ga N heterostructures and In Ga N films were grown by metal–organic chemical vapor ...In order to investigate the influence of compressive strain on indium incorporation in In Al N and In Ga N ternary nitrides, In Al N/Ga N heterostructures and In Ga N films were grown by metal–organic chemical vapor deposition. For the heterostructures, different compressive strains are produced by Ga N buffer layers grown on unpatterned and patterned sapphire substrates thanks to the distinct growth mode; while for the In Ga N films, compressive strains are changed by employing Al Ga N templates with different aluminum compositions. By various characterization methods, we find that the compressive strain will hamper the indium incorporation in both In Al N and In Ga N. Furthermore, compressive strain is conducive to suppress the non-uniform distribution of indium in In Ga N ternary alloys.展开更多
Dealloying by which the transition metal is partially or completely leached from an alloy precursor is an effective way to optimize the fundamental effects for further enhancing the electrocatalysis of a catalyst.Here...Dealloying by which the transition metal is partially or completely leached from an alloy precursor is an effective way to optimize the fundamental effects for further enhancing the electrocatalysis of a catalyst.Herein,to address the deficiencies associated with the commonly used dealloying methods,for example,electrochemical and sulfuric acid/nitric acid treatment,we report an acetic acid-assisted mild strategy to dealloy Cu atoms from the outer surface layers of CuPd alloy nanoparticles to achieve high-efficiency electrocatalysis for oxygen reduction and ethanol oxidation in an alkaline electrolyte.The leaching of Cu atoms by acetic acid exerts an additional compressive strain effect on the surface layers and exposes more active Pd atoms,which is beneficial for boosting the catalytic performance of a dealloyed catalyst for the oxygen reduction reaction(ORR)and the ethanol oxidation reaction(EOR).In particular,for ORR,the CuPd nanoparticles with a Pd/Cu molar ratio of 2:1 after acetic dealloying show a half-wave potential of 0.912 V(vs.RHE)and a mass activity of 0.213 AmgPd^(-1)at 0.9 V,respectively,while for EOR,the same dealloyed sample has a mass activity and a specific activity of 8.4 Amg^(-1)and 8.23 mA cm^(-2),respectively,much better than their dealloyed counterparts at other temperatures and commercial Pd/C as well as a Pt/C catalyst.展开更多
Strain engineering,as a powerful strategy to tune the optical and electrical properties of two-dimensional(2D)materials by deforming their crystal lattice,has attracted significant interest in recent years.2D material...Strain engineering,as a powerful strategy to tune the optical and electrical properties of two-dimensional(2D)materials by deforming their crystal lattice,has attracted significant interest in recent years.2D materials can sustain ultra-high strains,even up to 10%,due to the lack of dangling bonds on their surface,making them ideal brittle solids.This remarkable mechanical resilience,together with a strong strain-tunable band structure,endows 2D materials with a broad optical and electrical response upon strain.However,strain engineering based on 2D materials is restricted by their nanoscale and strain quantification troubles.In this study,we have modified a homebuilt three-points bending apparatus to transform it into a four-points bending apparatus that allows for the application of both compressive and tensile strains on 2D materials.This approach allows for the efficient and reproducible construction of a strain system and minimizes the buckling effect caused by the van der Waals interaction by adamantane encapsulation strategy.Our results demonstrate the feasibility of introducing compressive strain on 2D materials and the potential for tuning their optical and physical properties through this approach.展开更多
The development of efficient and durable electrocatalysts for oxygen reduction reaction(ORR)holds a pivotal significance in the successful commercialization of proton exchange membrane fuel cells(PEMFCs)but is still c...The development of efficient and durable electrocatalysts for oxygen reduction reaction(ORR)holds a pivotal significance in the successful commercialization of proton exchange membrane fuel cells(PEMFCs)but is still challenging.Herein,we report a worm-liked PtCu nanocrystals dispersed on nitrogen-doped carbon hollow microspheres(Pt_(0.38)Cu_(0.62)/N-HCS).Benefiting from its structural and compositional advantages,the resulting Pt_(0.38)Cu_(0.62)/N-HCS catalyst delivers exceptional electrocatalytic activity for ORR,with a half-wave potential(E_(1/2))of 0.837 V,a mass activity of 0.672 A mgPt^(-1),and a Tafel slope of 50.66 mV dec^(-1),surpassing that of commercial Pt/C.Moreover,the Pt_(0.38)Cu_(0.62)/N-HCS follows the desired four-electron transfer mechanism throughout the ORR process,thereby displaying a high selectivity for direct reduction of O_(2)to H_(2)O.Remarkably,this catalyst also showcases high stability,with only a 25 mV drop in E_(1/2)after 10,000 cycles in an acidic electrolyte.Theoretical calculations elucidate the incorporation of Cu into Pt lattice induces compressive strain,which effectively tailors the d band center of Pt active sites and strengthens the surface chemisorption of O_(2)molecules on PtCu alloys.Consequently,the Pt_(0.38)Cu_(0.62)/N-HCS catalyst exhibits an improved ability to adsorb O_(2)molecules on its surface,accelerating the reaction kinetics of O_(2)conversion to*OOH.Additionally,Cu atoms,not only serving as sacrificial anode,undergo preferential oxidation during PEMFCs operation when compared to Pt,but also the stable Cu species in PtCu alloys contributes significantly to maintaining the strain effect,collectively enhancing both activity and durability.Overall,this research offers an effective and promising approach to enhance the activity and stability of Pt-based ORR electrocatalysts in PEMFCs.展开更多
The compressively strained InGaAs/InGaAsP quantum well distributed feedback laser with ridge-wave- guide is fabricated at 1.74μm. It is grown by low-pressure metal organic chemical vapor deposition（MOCVD）. A strain...The compressively strained InGaAs/InGaAsP quantum well distributed feedback laser with ridge-wave- guide is fabricated at 1.74μm. It is grown by low-pressure metal organic chemical vapor deposition（MOCVD）. A strain buffer layer is used to avoid indium segregation. The threshold current of the device uncoated with length of 300μm is 11.5mA. The maximum output power is 14mW at 100mA. A side mode suppression ratio of 35.5dB is obtained.展开更多
IrO_(2)exhibits good stability but limited electrocatalytic activity for oxygen evolution reaction in acid.Defect engineering is an effective strategy to improve the intrinsic ability of electrocatalysts by tailoring ...IrO_(2)exhibits good stability but limited electrocatalytic activity for oxygen evolution reaction in acid.Defect engineering is an effective strategy to improve the intrinsic ability of electrocatalysts by tailoring their electronic structure.Herein,we have successfully synthesized IrO_(2)/Ir heterophase with compressive strain and metal vacancies via a simple substitution-etching method.In virtue of the solubility of Cr in strong alkali,metal vacancies could be formed at surface after etching Cr-doped IrO_(2)/Ir in alkali,which leaded to modulated electronic structure.Meanwhile,the substitution of Cr with smaller atom radius would induce the formation of compressive strain and the relocated atoms made the d-band center shifted.With the regulated electronic structure and tuned d-band center,the obtained electrocatalyst only needed 285 mV to reach 10 mA·cm^(−2)in 0.1 M HClO4.Reaction kinetic has been rapidly accelerated as indicated by the smaller Tafel slope and charge transfer resistance.Theoretical calculations revealed that the d-band center and charge density distribution have been regulated with the introduction of defects in IrO_(2)/Ir,which significantly decreased the free energy barrier of rate determining step.This work provides a valuable reference to design effective and defects-rich electrocatalysts.展开更多
Using first-principles calculations,including Grimme D2 method for van der Waals interactions,we investigate the tuning electronic properties of bilayer zirconium disulfides（ZrS_2/ subjected to vertical electric fiel...Using first-principles calculations,including Grimme D2 method for van der Waals interactions,we investigate the tuning electronic properties of bilayer zirconium disulfides（ZrS_2/ subjected to vertical electric field and normal compressive strain.The band gap of ZrS_2 bilayer can be flexibly tuned by vertical external electric field.Due to the Stark effect,at critical electric fields about 1.4 V/？,semiconducting-metallic transition presents.In addition,our results also demonstrated that the compressive strain has an important impact on the electronic properties of ZrS_2 bilayer sheet.The widely tunable band gaps confirm possibilities for its applications in electronics and optoelectronics.展开更多
The oxygen evolution reaction(OER)is a crucial step in metal-air batteries and water splitting technologies,playing a significant role in the efficiency and achievable heights of these two technologies.However,the OER...The oxygen evolution reaction(OER)is a crucial step in metal-air batteries and water splitting technologies,playing a significant role in the efficiency and achievable heights of these two technologies.However,the OER is a four-step,four-electron reaction,and its slow kinetics result in high overpotentials,posing a challenge.To address this issue,numerous strategies involving modified catalysts have been proposed and proven to be highly efficient.In these strategies,the introduction of strain has been widely reported because it is generally believed to effectively regulate the electronic structure of metal sites and alter the adsorption energy of catalyst surfaces with reaction intermediates.However,strain has many other effects that are not well known,making it an important yet unexplored area.Based on this,this review provides a detailed introduction to the various roles of strain in OER.To better explain these roles,the review also presents the definition of strain and elucidates the potential mechanisms of strain in OER based on the d-band center theory and adsorption volcano plot.Additionally,the review showcases various ways of introducing strain in OER through examples reported in the latest literature,aiming to provide a comprehensive perspective for the development of strain engineering.Finally,the review analyzes the appropriate proportion of strain introduction,compares compressive and tensile strain,and examines the impact of strain on stability.And the review offers prospects for future research directions in this emerging field.展开更多
Effects of strain rate and water-to-cement ratio on the dynamic compressive mechanical behavior of cement mortar are investigated by split Hopkinson pressure bar(SHPB) tests. 124 specimens are subjected to dynamic uni...Effects of strain rate and water-to-cement ratio on the dynamic compressive mechanical behavior of cement mortar are investigated by split Hopkinson pressure bar(SHPB) tests. 124 specimens are subjected to dynamic uniaxial compressive loadings.Strain rate sensitivity of the materials is measured in terms of failure modes, stress-strain curves, compressive strength, dynamic increase factor(DIF) and critical strain at peak stress. A significant change in the stress-strain response of the materials with each order of magnitude increase in strain rate is clearly seen from test results. The slope of the stress-strain curve after peak value for low water-to-cement ratio is steeper than that of high water-to-cement ratio mortar. The compressive strength increases with increasing strain rate. With increase in strain rate, the dynamic increase factor(DIF) increases. However, this increase in DIF with increase in strain rate does not appear to be a function of the water-to-cement ratio. The critical compressive strain increases with the strain rate.展开更多
The exploitation of durable and highly active Pt-based electrocatalysts for the oxygen reduction reaction(ORR)is essential for the commercialization of proton exchange membrane fuel cells(PEMFCs).Herein,we designed Pt...The exploitation of durable and highly active Pt-based electrocatalysts for the oxygen reduction reaction(ORR)is essential for the commercialization of proton exchange membrane fuel cells(PEMFCs).Herein,we designed Pt@Pt_(3)Ti core-shell nanoparticles with atomic-controllable shells through precise thermal diffusing Ti into Pt nanoparticles for effective and durable ORR.Combining theoretical and experiment analysis,we found that the lattice strain of Pt_(3)Ti shells can be tailored by precisely controlling the thick-ness of Pt_(3)Ti shell in atomic-scale on account of the lattice constant difference between Pt and Pt_(3)Ti to optimize adsorption properties of Pt_(3)Ti for ORR intermediates,thus enhancing its performance.The Pt@Pt_(3)Ti catalyst with one-atomic Pt_(3)Ti shell(Pt@1L-Pt_(3)Ti/TiO_(2)-C)demonstrates excellent performance with mass activity of 592 mA mgpt-1 and durability nearly 19.5-fold that of commercial Pt/C with negligible decay(2%)after 30,000 potential cycles(0.6-1.0 V vs.RHE).Notably,at higher potential cycles(1.0 V-1.5 V vs.RHE),Pt@1L-Pt_(3)Ti/TiO_(2)-C also showed far superior durability than Pt/C(9.6%decayed while 54.8% for commercial Pt/C).This excellent stability is derived from the intrinsic stability of Pt_(3)Ti alloy and the confinement effect of TiO_(2)-C.The catalyst's enhancement was further confirmed in PEMFC configuration.展开更多
Flow behavior and microstructure of a homogenized ZK60 magnesium alloy were investigated during compression in the temperature range of 250-400 ℃ and the strain rate range of 0.1-50 s^-1. The results showed that dyna...Flow behavior and microstructure of a homogenized ZK60 magnesium alloy were investigated during compression in the temperature range of 250-400 ℃ and the strain rate range of 0.1-50 s^-1. The results showed that dynamic recrystallization （DRX） developed mainly at grain boundaries at lower strain rate （0.1-1 s^-1）, while in the case of higher strain rate （10-50 s^-1）, DRX occurred extensively both at twins and grain boundaries at all temperature range, especially at temperature lower than 350 ℃, which resulted in a more homogeneous microstructure than that under other deformation conditions. The DRX extent determines the hot workability of the workpiece, therefore, hot deformation at the strain rate of 10-50 s^-1 and in the temperature range of 250-350 ℃ was desirable for ZK60 alloy. Twin induced DRX during high strain rate compression included three steps. Firstly, twins with high dislocation subdivided the initial grain, then dislocation arrays subdivided the twins into subgrains, and after that DRX took place with a further increase of strain.展开更多
The Kapitza resistance is of fundamental importance for the thermal stability of the interface between the ceramic top coat and the thermal growth oxide layer in the thermal barrier coating structure,which is widely u...The Kapitza resistance is of fundamental importance for the thermal stability of the interface between the ceramic top coat and the thermal growth oxide layer in the thermal barrier coating structure,which is widely used to protect high-temperature components in current gas turbine engines.The top coat typically consists of the ZrO_(2)partially stabilized by 8%Y2O3(YSZ),and the main component of the thermal growth oxide isα-Al_(2)O_(3).In this work,the Kapitza resistance is found to be a small value of 0.69 m^(2)K/GW for the YSZ/α-Al_(2)O_(3)interface based on the heat dissipation simulation method.It indicates that the localization of thermal energy is rather weak,which is beneficial for the thermal stability of the YSZ/α-Al_(2)O_(3)interface.This Kapitza resistance can be further reduced to 0.50 m^(2)K/GW by a mechanical or thermal compressive strain of 8%.To explore the underlying mechanism for this strain effect,we analyze the phonon vibration and the microscopic deformation in the interface region.It is revealed that the interface becomes denser through the compression-induced twisting of some Al-O_(zr)and A1-O_(Al)chemical bonds in the interface region,which is responsible for the reduction in the Kapitza resistance.The temperature effect and crystal size effect on the Kapitza resistance of the YSZ/α-Al_(2)O_(3)interface are also systematically studied.These findings shall provide valuable information for further understanding of the thermal conductivity and thermal stability of the thermal barrier coating structures.展开更多
Recrystallization behavior of a low carbon X70 pipeline steel was studied in the plane strain compression condition. It was found that the dynamic recovery but no dynamic recrystal- lization occurred in the current ex...Recrystallization behavior of a low carbon X70 pipeline steel was studied in the plane strain compression condition. It was found that the dynamic recovery but no dynamic recrystal- lization occurred in the current experimental condition. A method for examining the prior austenite grain boundary corrosion was supposed.展开更多
The effect of moisture content upon compressive mechanical behavior of concrete under impact loading was studied. The axial rapid compressive loading tests of over 50 specimens with five different saturations were exe...The effect of moisture content upon compressive mechanical behavior of concrete under impact loading was studied. The axial rapid compressive loading tests of over 50 specimens with five different saturations were executed. The technique "split Hopkinson pressure bar"(SHPB) was used. The impact velocity was 10 m/s with corresponding strain rate of 50 s-1. The compressive behavior of materials was measured in terms of stress-strain curves, dynamic compressive strength, dynamic increase factor(DIF) and critical strain at a maximum stress. The data obtained from test indicate that both ascending and descending portions of stress-stain curves are affected by moisture content. However, the effect is noted to be more significant in ascending portion of the stress-strain curves. Dynamic compressive strength is higher at lower moisture content and weaker at higher moisture content.Furthermore, under nearly saturated condition, an increase in compressive strength can be found. The effect of moisture content on the average DIF of concrete is not significant. The critical compressive strain of concrete does not change with moisture content.展开更多
Ferroelectric HfO_(2)has attracted much attention owing to its superior ferroelectricity at an ultra-thin thickness and good compatibility with Si-based complementary metal-oxide-semiconductor(CMOS)technology.However,...Ferroelectric HfO_(2)has attracted much attention owing to its superior ferroelectricity at an ultra-thin thickness and good compatibility with Si-based complementary metal-oxide-semiconductor(CMOS)technology.However,the crystallization of polar orthorhombic phase(o-phase)HfO_(2)is less competitive,which greatly limits the ferroelectricity of the as-obtained ferroelectric HfO_(2)thin films.Fortunately,the crystallization of o-phase HfO_(2)can be thermodynamically modulated via interfacial stress engineering.In this paper,the growth of improved ferroelectric Al doped HfO_(2)(HfO_(2):Al)thin films on(111)-oriented Si substrate has been reported.Structural analysis has suggested that nonpolar monoclinic HfO_(2):Al grown on(111)-oriented Si substrate suffered from a strong compressive strain,which promoted the crystallization of(111)-oriented o-phase HfO_(2)in the as-grown HfO_(2):Al thin films.In addition,the in-plane lattice of(111)-oriented Si substrate matches well with that of(111)-oriented o-phase HfO_(2),which further thermally stabilizes the o-phase HfO_(2).Accordingly,an improved ferroelectricity with a remnant polarization(2P_(r))of 26.7C/cm^(2) has been obtained.The results shown in this work provide a simple way toward the preparation of improved ferroelectric HfO_(2)thin films.展开更多
In this work,heat treatment experiments at 1050 and 1100℃were carried out on single-crystal su-peralloy specimens coated with the electron beam physical vapor deposition(EB-PVD)thermal barrier coating(TBC)system.Furt...In this work,heat treatment experiments at 1050 and 1100℃were carried out on single-crystal su-peralloy specimens coated with the electron beam physical vapor deposition(EB-PVD)thermal barrier coating(TBC)system.Furthermore,the evolution of microstructural characteristics and sintering-induced mechanical properties were separately obtained by the field emission scanning electron microscope(FE-SEM)and nanoindenter,providing inputs for damage modeling.Meanwhile,the critical compressive strain of TBCs at room temperature was acquired using 3D digital image correlation(3D-DIC)technology to characterize the interfacial damage combined with the experimentally observed buckling modes.The re-sults demonstrate that not only does oxidative damage exist in the TBCs system due to thermally grown oxide(TGO)growth,but additional damage is generated by thermal cycling and sintering behavior,re-spectively.Then,a nonlinear cumulative interfacial damage model considering multiple failure factors is developed to predict TBCs’life.The error between the measured damage and calculated damage is less than 15%,showing good prediction accuracy.展开更多
The deformation mechanisms and dynamic recrystallization(DRX)behavior of specifically grown bicrystals with a symmetric 90°<1010>and 90°<1120>tilt grain boundary,respectively,were investigated un...The deformation mechanisms and dynamic recrystallization(DRX)behavior of specifically grown bicrystals with a symmetric 90°<1010>and 90°<1120>tilt grain boundary,respectively,were investigated under deformation in plane strain compression at 200℃and 400℃.The microstructures were analyzed by panoramic optical microscopy and large-area electron backscatter diffraction(EBSD)orientation mapping.The analysis employed a meticulous approach utilizing hundreds of individual,small EBSD maps with a small step size that were stitched together to provide comprehensive access to orientation and misorientation data on a macroscopic scale.Basal slip primarily governed the early stages of deformation at the two temperatures,and the resulting shear induced lattice rotation around the transverse direction(TD)of the sample.The existence of the grain boundary gave rise to dislocation pile-up in its vicinity,leading to much larger TD-lattice rotations within the boundary region compared to the bulk.With increasing temperature,the deformation was generally more uniform towards the bulk due to enhanced dislocation mobility and more uniform stress distribution.Dynamic recrystallization at 200℃was initiated in{1011}-compression twins at strains of 40%and higher.At 400℃,DRX consumed the entire grain boundary region and gradually replaced the deformed microstructure with progressing deformation.The recrystallized grains displayed characteristic orientations,such that their c-axes were perpendicular to the TD and additionally scattered between 0°and 60°from the loading axis.These recrystallized grains displayed mutual rotations of up to 30°around the c-axes of the initial grains,forming a discernible basal fiber texture component,prominently visible in the{1120}pole figure.It is noteworthy that the deformation and DRX behaviors of the two analyzed bicrystals exhibited marginal variations in response to strain and deformation temperature.展开更多
Pipelines in geological disaster regions typically suffer the risk of local buckling failure because of slender structure and complex load. This paper is meant to reveal the local buckling behavior of buried pipelines...Pipelines in geological disaster regions typically suffer the risk of local buckling failure because of slender structure and complex load. This paper is meant to reveal the local buckling behavior of buried pipelines with a large diameter and high strength, which are under different conditions, including pure bending and bending combined with internal pressure. Finite element analysis was built according to previous data to study local buckling behavior of pressurized and unpressurized pipes under bending conditions and their differences in local buckling failure modes. In parametric analysis, a series of parameters,including pipe geometrical dimension, pipe material properties and internal pressure, were selected to study their influences on the critical bending moment, critical compressive stress and critical compressive strain of pipes.Especially the hardening exponent of pipe material was introduced to the parameter analysis by using the Ramberg–Osgood constitutive model. Results showed that geometrical dimensions, material and internal pressure can exert similar effects on the critical bending moment and critical compressive stress, which have different, even reverse effects on the critical compressive strain. Based on these analyses, more accurate design models of critical bending moment and critical compressive stress have been proposed for high-strength pipelines under bendingconditions, which provide theoretical methods for highstrength pipeline engineering.展开更多
基金Self-innovation Capability Construction of Jilin Province Development and Reform Commission,Grant/Award Number:2021C026National Natural Science Foundation of China,Grant/Award Numbers:12034002,22202080,22279044,51872116Jilin Province Science and Technology Development Program,Grant/Award Number:20210301009GX。
文摘Strain effects have garnered significant attention in catalytic applications due to their ability to modulate the electronic structure and surface adsorption properties of catalysts.In this study,we propose a novel approach called“similar stacking”for stress modulation,achieved through the loading of Co_(2)P on Ni_(2)P(Ni_(2)P/Co_(2)P).Theoretical simulations reveal that the compressive strain induced by Co_(2)P influences orbital overlap and electron transfer with hydrogen atoms.Furthermore,the number of stacked layers can be adjusted by varying the precursor soaking time,which further modulates the strain range and hydrogen adsorption.Under a 2-h soaking condition,the strain effect proves favorable for efficient hydrogen production.Experimental characterizations using X-ray diffraction,high-angel annular dark-field scanning transmission election microscope(HAADF-STEM),and X-ray absorption near-edge structure spectroscopy successfully demonstrate lattice contraction of Co_(2)P and bond length shortening of Co-P.Remarkably,our catalyst shows an ultrahigh current density of 1 A cm^(-2) at an overpotential of only 388 mV,surpassing that of commercial Pt/C,while maintaining long-term stability.This material design strategy of similar stacking opens up new avenues of strain modulation and the deeper development of electrocatalysts.
基金financially supported by the National Natural Science Foundation of China(Grant No.52171285)。
文摘A dent is a common type of defects for submarine pipeline.For submarine pipelines,high hydrostatic pressure and internal pressure are the main loads.Once pipelines bend due to complex subsea conditions,the compression strain capacity may be exceeded.Research into the local buckling failure and accurate prediction of the compressive strain capacity are important.A finite element model of a pipeline with a dent is established.Local buckling failure under a bending moment is investigated,and the compressive strain capacity is calculated.The effects of different parameters on pipeline local buckling are analyzed.The results show that the dent depth,external pressure and internal pressure lead to different local buckling failure modes of the pipeline.A higher internal pressure indicates a larger compressive strain capacity,and the opposite is true for external pressure.When the ratio of external pressure to collapse pressure of intact pipeline is greater than 0.1,the deeper the dent,the greater the compressive strain capacity of the pipeline.And as the ratio is less than 0.1,the opposite is true.On the basis of these results,a regression equation for predicting the compressive strain capacity of a dented submarine pipeline is proposed,which can be referred to during the integrity assessment of a submarine pipeline.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61404099 and 61306017)the Fundamental Research Funds for the Central Universities,China(Grant No.JB141101)
文摘In order to investigate the influence of compressive strain on indium incorporation in In Al N and In Ga N ternary nitrides, In Al N/Ga N heterostructures and In Ga N films were grown by metal–organic chemical vapor deposition. For the heterostructures, different compressive strains are produced by Ga N buffer layers grown on unpatterned and patterned sapphire substrates thanks to the distinct growth mode; while for the In Ga N films, compressive strains are changed by employing Al Ga N templates with different aluminum compositions. By various characterization methods, we find that the compressive strain will hamper the indium incorporation in both In Al N and In Ga N. Furthermore, compressive strain is conducive to suppress the non-uniform distribution of indium in In Ga N ternary alloys.
基金the financial support provided by the National Natural Science Foundation of China(22075290,21972068,52164028)the Beijing Natural Science Foundation(Z200012)+3 种基金the State Key Laboratory of Multiphase Complex Systemsthe Institute of Process Engineeringthe Chinese Academy of Sciences(MPCS-2021-A-05)the Nanjing IPE Institute of Green Manufacturing Industry(E0010725).
文摘Dealloying by which the transition metal is partially or completely leached from an alloy precursor is an effective way to optimize the fundamental effects for further enhancing the electrocatalysis of a catalyst.Herein,to address the deficiencies associated with the commonly used dealloying methods,for example,electrochemical and sulfuric acid/nitric acid treatment,we report an acetic acid-assisted mild strategy to dealloy Cu atoms from the outer surface layers of CuPd alloy nanoparticles to achieve high-efficiency electrocatalysis for oxygen reduction and ethanol oxidation in an alkaline electrolyte.The leaching of Cu atoms by acetic acid exerts an additional compressive strain effect on the surface layers and exposes more active Pd atoms,which is beneficial for boosting the catalytic performance of a dealloyed catalyst for the oxygen reduction reaction(ORR)and the ethanol oxidation reaction(EOR).In particular,for ORR,the CuPd nanoparticles with a Pd/Cu molar ratio of 2:1 after acetic dealloying show a half-wave potential of 0.912 V(vs.RHE)and a mass activity of 0.213 AmgPd^(-1)at 0.9 V,respectively,while for EOR,the same dealloyed sample has a mass activity and a specific activity of 8.4 Amg^(-1)and 8.23 mA cm^(-2),respectively,much better than their dealloyed counterparts at other temperatures and commercial Pd/C as well as a Pt/C catalyst.
基金the European Research Council(ERC)under the European Union's Horizon 2020 research and innovation program(Nos.755655,ERC-StG 2017 project 2DTOPSENSE)the Ministry of Science and Innovation(Spain)through the project PID2020-115566RB-I00+5 种基金the EU FLAG-ERA project To2Dox under the program PCI2019-111893-2H.L.acknowledges the grant from China Scholarship Council(CSC)under No.201907040070Ana B.thanks the ERC Union's Horizon 2020 program(No.851929 StG 2019 project 3DScavengers)the Spanish Ministry of Science and Innovation AEI/10.13039/501100011033(No.PID2019-110430GB-C21)the EU ERDF(FEDER Operational Program(2014-2020)A way of making Europe)and the Consejería de Economía,Conocimiento,Empresas y Universidad de la Junta de Andalucía(Nos.P18-RT-3480,EMERGIA and US-1381057).
文摘Strain engineering,as a powerful strategy to tune the optical and electrical properties of two-dimensional(2D)materials by deforming their crystal lattice,has attracted significant interest in recent years.2D materials can sustain ultra-high strains,even up to 10%,due to the lack of dangling bonds on their surface,making them ideal brittle solids.This remarkable mechanical resilience,together with a strong strain-tunable band structure,endows 2D materials with a broad optical and electrical response upon strain.However,strain engineering based on 2D materials is restricted by their nanoscale and strain quantification troubles.In this study,we have modified a homebuilt three-points bending apparatus to transform it into a four-points bending apparatus that allows for the application of both compressive and tensile strains on 2D materials.This approach allows for the efficient and reproducible construction of a strain system and minimizes the buckling effect caused by the van der Waals interaction by adamantane encapsulation strategy.Our results demonstrate the feasibility of introducing compressive strain on 2D materials and the potential for tuning their optical and physical properties through this approach.
基金the Young Elite Scientists Sponsorship Program by CAST(2021QNRC001)Natural Science Foundation of Chongqing(CSTB2022NSCQ-MSX0557,cstb2023nscq-msx0979)+3 种基金Talent Introduction of Chongqing University of Science and Technology(ckrc2021050,ckrc20230401,ckrc2021053)the Science and Technology Research Program of Chongqing Municipal Education Commission(KJQN202201532,KJQN202301542)the National Natural Science Foundation of China(22109016)Open Research Fund of CNMGE Platform&NSCC-TJ(CNMGE2023016).
文摘The development of efficient and durable electrocatalysts for oxygen reduction reaction(ORR)holds a pivotal significance in the successful commercialization of proton exchange membrane fuel cells(PEMFCs)but is still challenging.Herein,we report a worm-liked PtCu nanocrystals dispersed on nitrogen-doped carbon hollow microspheres(Pt_(0.38)Cu_(0.62)/N-HCS).Benefiting from its structural and compositional advantages,the resulting Pt_(0.38)Cu_(0.62)/N-HCS catalyst delivers exceptional electrocatalytic activity for ORR,with a half-wave potential(E_(1/2))of 0.837 V,a mass activity of 0.672 A mgPt^(-1),and a Tafel slope of 50.66 mV dec^(-1),surpassing that of commercial Pt/C.Moreover,the Pt_(0.38)Cu_(0.62)/N-HCS follows the desired four-electron transfer mechanism throughout the ORR process,thereby displaying a high selectivity for direct reduction of O_(2)to H_(2)O.Remarkably,this catalyst also showcases high stability,with only a 25 mV drop in E_(1/2)after 10,000 cycles in an acidic electrolyte.Theoretical calculations elucidate the incorporation of Cu into Pt lattice induces compressive strain,which effectively tailors the d band center of Pt active sites and strengthens the surface chemisorption of O_(2)molecules on PtCu alloys.Consequently,the Pt_(0.38)Cu_(0.62)/N-HCS catalyst exhibits an improved ability to adsorb O_(2)molecules on its surface,accelerating the reaction kinetics of O_(2)conversion to*OOH.Additionally,Cu atoms,not only serving as sacrificial anode,undergo preferential oxidation during PEMFCs operation when compared to Pt,but also the stable Cu species in PtCu alloys contributes significantly to maintaining the strain effect,collectively enhancing both activity and durability.Overall,this research offers an effective and promising approach to enhance the activity and stability of Pt-based ORR electrocatalysts in PEMFCs.
文摘The compressively strained InGaAs/InGaAsP quantum well distributed feedback laser with ridge-wave- guide is fabricated at 1.74μm. It is grown by low-pressure metal organic chemical vapor deposition（MOCVD）. A strain buffer layer is used to avoid indium segregation. The threshold current of the device uncoated with length of 300μm is 11.5mA. The maximum output power is 14mW at 100mA. A side mode suppression ratio of 35.5dB is obtained.
基金This work was supported by the National Natural Science Foundation of China(Nos.92061201,21825106,and 22102155)the China Postdoctoral Science Foundation(Nos.2021M692909 and 2022T150587)+1 种基金the Program for Innovative Research Team(in Science and Technology)in Universities of Henan Province and Zhengzhou University(No.19IRSTHN022)the Key Scientific and Technological Project of Henan Province(No.2021102210027).
文摘IrO_(2)exhibits good stability but limited electrocatalytic activity for oxygen evolution reaction in acid.Defect engineering is an effective strategy to improve the intrinsic ability of electrocatalysts by tailoring their electronic structure.Herein,we have successfully synthesized IrO_(2)/Ir heterophase with compressive strain and metal vacancies via a simple substitution-etching method.In virtue of the solubility of Cr in strong alkali,metal vacancies could be formed at surface after etching Cr-doped IrO_(2)/Ir in alkali,which leaded to modulated electronic structure.Meanwhile,the substitution of Cr with smaller atom radius would induce the formation of compressive strain and the relocated atoms made the d-band center shifted.With the regulated electronic structure and tuned d-band center,the obtained electrocatalyst only needed 285 mV to reach 10 mA·cm^(−2)in 0.1 M HClO4.Reaction kinetic has been rapidly accelerated as indicated by the smaller Tafel slope and charge transfer resistance.Theoretical calculations revealed that the d-band center and charge density distribution have been regulated with the introduction of defects in IrO_(2)/Ir,which significantly decreased the free energy barrier of rate determining step.This work provides a valuable reference to design effective and defects-rich electrocatalysts.
基金Project support by the CAS/SAFEA International Partnership Program for Creative Research Teams and the Basic and Frontier Technology Research of Henan(No.142300410244)
文摘Using first-principles calculations,including Grimme D2 method for van der Waals interactions,we investigate the tuning electronic properties of bilayer zirconium disulfides（ZrS_2/ subjected to vertical electric field and normal compressive strain.The band gap of ZrS_2 bilayer can be flexibly tuned by vertical external electric field.Due to the Stark effect,at critical electric fields about 1.4 V/？,semiconducting-metallic transition presents.In addition,our results also demonstrated that the compressive strain has an important impact on the electronic properties of ZrS_2 bilayer sheet.The widely tunable band gaps confirm possibilities for its applications in electronics and optoelectronics.
基金financially supported by the National Natural Science Foundation of China(52071072)the Fundamental Research Funds for the Central Universities(2023GFZD03)+4 种基金the Natural Science Foundation-Steel,the Iron Foundation of Hebei Province(E2022501030)the Key Research and Development Plan of Qinhuangdao City(202302B013)the Liaoning Applied Basic Research Program(2023JH2/101300011)the Basic scientific research project of Liaoning Province Department of Education(LJKZZ20220024)the Shenyang Science and Technology Project(23-407-3-13)。
文摘The oxygen evolution reaction(OER)is a crucial step in metal-air batteries and water splitting technologies,playing a significant role in the efficiency and achievable heights of these two technologies.However,the OER is a four-step,four-electron reaction,and its slow kinetics result in high overpotentials,posing a challenge.To address this issue,numerous strategies involving modified catalysts have been proposed and proven to be highly efficient.In these strategies,the introduction of strain has been widely reported because it is generally believed to effectively regulate the electronic structure of metal sites and alter the adsorption energy of catalyst surfaces with reaction intermediates.However,strain has many other effects that are not well known,making it an important yet unexplored area.Based on this,this review provides a detailed introduction to the various roles of strain in OER.To better explain these roles,the review also presents the definition of strain and elucidates the potential mechanisms of strain in OER based on the d-band center theory and adsorption volcano plot.Additionally,the review showcases various ways of introducing strain in OER through examples reported in the latest literature,aiming to provide a comprehensive perspective for the development of strain engineering.Finally,the review analyzes the appropriate proportion of strain introduction,compares compressive and tensile strain,and examines the impact of strain on stability.And the review offers prospects for future research directions in this emerging field.
基金Project(51479048) supported by National Natural Science Foundation of China
文摘Effects of strain rate and water-to-cement ratio on the dynamic compressive mechanical behavior of cement mortar are investigated by split Hopkinson pressure bar(SHPB) tests. 124 specimens are subjected to dynamic uniaxial compressive loadings.Strain rate sensitivity of the materials is measured in terms of failure modes, stress-strain curves, compressive strength, dynamic increase factor(DIF) and critical strain at peak stress. A significant change in the stress-strain response of the materials with each order of magnitude increase in strain rate is clearly seen from test results. The slope of the stress-strain curve after peak value for low water-to-cement ratio is steeper than that of high water-to-cement ratio mortar. The compressive strength increases with increasing strain rate. With increase in strain rate, the dynamic increase factor(DIF) increases. However, this increase in DIF with increase in strain rate does not appear to be a function of the water-to-cement ratio. The critical compressive strain increases with the strain rate.
基金supported by the National Natural Science Foundation of China(No.21875039)the Project on the Integration of Industry-Education-Research of Fujian Province(No.2021H6020)the State Key Laboratory of Advanced Technology for Materials Synthesis and Processing(Wuhan University of Technology).
文摘The exploitation of durable and highly active Pt-based electrocatalysts for the oxygen reduction reaction(ORR)is essential for the commercialization of proton exchange membrane fuel cells(PEMFCs).Herein,we designed Pt@Pt_(3)Ti core-shell nanoparticles with atomic-controllable shells through precise thermal diffusing Ti into Pt nanoparticles for effective and durable ORR.Combining theoretical and experiment analysis,we found that the lattice strain of Pt_(3)Ti shells can be tailored by precisely controlling the thick-ness of Pt_(3)Ti shell in atomic-scale on account of the lattice constant difference between Pt and Pt_(3)Ti to optimize adsorption properties of Pt_(3)Ti for ORR intermediates,thus enhancing its performance.The Pt@Pt_(3)Ti catalyst with one-atomic Pt_(3)Ti shell(Pt@1L-Pt_(3)Ti/TiO_(2)-C)demonstrates excellent performance with mass activity of 592 mA mgpt-1 and durability nearly 19.5-fold that of commercial Pt/C with negligible decay(2%)after 30,000 potential cycles(0.6-1.0 V vs.RHE).Notably,at higher potential cycles(1.0 V-1.5 V vs.RHE),Pt@1L-Pt_(3)Ti/TiO_(2)-C also showed far superior durability than Pt/C(9.6%decayed while 54.8% for commercial Pt/C).This excellent stability is derived from the intrinsic stability of Pt_(3)Ti alloy and the confinement effect of TiO_(2)-C.The catalyst's enhancement was further confirmed in PEMFC configuration.
基金Project (14JJ6047) supported by the Natural Science Foundation of Hunan Province,ChinaProject (51274092) supported by the National Natural Science Foundation of ChinaProject (20120161110040) supported by the Doctoral Program of Higher Education ofChina
文摘Flow behavior and microstructure of a homogenized ZK60 magnesium alloy were investigated during compression in the temperature range of 250-400 ℃ and the strain rate range of 0.1-50 s^-1. The results showed that dynamic recrystallization （DRX） developed mainly at grain boundaries at lower strain rate （0.1-1 s^-1）, while in the case of higher strain rate （10-50 s^-1）, DRX occurred extensively both at twins and grain boundaries at all temperature range, especially at temperature lower than 350 ℃, which resulted in a more homogeneous microstructure than that under other deformation conditions. The DRX extent determines the hot workability of the workpiece, therefore, hot deformation at the strain rate of 10-50 s^-1 and in the temperature range of 250-350 ℃ was desirable for ZK60 alloy. Twin induced DRX during high strain rate compression included three steps. Firstly, twins with high dislocation subdivided the initial grain, then dislocation arrays subdivided the twins into subgrains, and after that DRX took place with a further increase of strain.
基金the National Natural Science Foundation of China(Grant Nos.11822206 and 12072182)Innovation Program of the Shanghai Municipal Education Commission(Grant No.2017-01-07-00-09-E00019)。
文摘The Kapitza resistance is of fundamental importance for the thermal stability of the interface between the ceramic top coat and the thermal growth oxide layer in the thermal barrier coating structure,which is widely used to protect high-temperature components in current gas turbine engines.The top coat typically consists of the ZrO_(2)partially stabilized by 8%Y2O3(YSZ),and the main component of the thermal growth oxide isα-Al_(2)O_(3).In this work,the Kapitza resistance is found to be a small value of 0.69 m^(2)K/GW for the YSZ/α-Al_(2)O_(3)interface based on the heat dissipation simulation method.It indicates that the localization of thermal energy is rather weak,which is beneficial for the thermal stability of the YSZ/α-Al_(2)O_(3)interface.This Kapitza resistance can be further reduced to 0.50 m^(2)K/GW by a mechanical or thermal compressive strain of 8%.To explore the underlying mechanism for this strain effect,we analyze the phonon vibration and the microscopic deformation in the interface region.It is revealed that the interface becomes denser through the compression-induced twisting of some Al-O_(zr)and A1-O_(Al)chemical bonds in the interface region,which is responsible for the reduction in the Kapitza resistance.The temperature effect and crystal size effect on the Kapitza resistance of the YSZ/α-Al_(2)O_(3)interface are also systematically studied.These findings shall provide valuable information for further understanding of the thermal conductivity and thermal stability of the thermal barrier coating structures.
文摘Recrystallization behavior of a low carbon X70 pipeline steel was studied in the plane strain compression condition. It was found that the dynamic recovery but no dynamic recrystal- lization occurred in the current experimental condition. A method for examining the prior austenite grain boundary corrosion was supposed.
基金Project(50979032)supported by the National Natural Science Foundation of China
文摘The effect of moisture content upon compressive mechanical behavior of concrete under impact loading was studied. The axial rapid compressive loading tests of over 50 specimens with five different saturations were executed. The technique "split Hopkinson pressure bar"(SHPB) was used. The impact velocity was 10 m/s with corresponding strain rate of 50 s-1. The compressive behavior of materials was measured in terms of stress-strain curves, dynamic compressive strength, dynamic increase factor(DIF) and critical strain at a maximum stress. The data obtained from test indicate that both ascending and descending portions of stress-stain curves are affected by moisture content. However, the effect is noted to be more significant in ascending portion of the stress-strain curves. Dynamic compressive strength is higher at lower moisture content and weaker at higher moisture content.Furthermore, under nearly saturated condition, an increase in compressive strength can be found. The effect of moisture content on the average DIF of concrete is not significant. The critical compressive strain of concrete does not change with moisture content.
基金Research Fund of Guangdong-Hong Kong-Macao Joint Laboratory for Intelligent Micro-Nano Optoelectronic Tech-nology,China(Grant No.2020B1212030010)Project of Faculty of Agricultural Equipment of Jiangsu University (Grant No. NZXB20210202) are acknowledged。
文摘Ferroelectric HfO_(2)has attracted much attention owing to its superior ferroelectricity at an ultra-thin thickness and good compatibility with Si-based complementary metal-oxide-semiconductor(CMOS)technology.However,the crystallization of polar orthorhombic phase(o-phase)HfO_(2)is less competitive,which greatly limits the ferroelectricity of the as-obtained ferroelectric HfO_(2)thin films.Fortunately,the crystallization of o-phase HfO_(2)can be thermodynamically modulated via interfacial stress engineering.In this paper,the growth of improved ferroelectric Al doped HfO_(2)(HfO_(2):Al)thin films on(111)-oriented Si substrate has been reported.Structural analysis has suggested that nonpolar monoclinic HfO_(2):Al grown on(111)-oriented Si substrate suffered from a strong compressive strain,which promoted the crystallization of(111)-oriented o-phase HfO_(2)in the as-grown HfO_(2):Al thin films.In addition,the in-plane lattice of(111)-oriented Si substrate matches well with that of(111)-oriented o-phase HfO_(2),which further thermally stabilizes the o-phase HfO_(2).Accordingly,an improved ferroelectricity with a remnant polarization(2P_(r))of 26.7C/cm^(2) has been obtained.The results shown in this work provide a simple way toward the preparation of improved ferroelectric HfO_(2)thin films.
基金supported by the National Natural Science Foundation of China(Grant Nos.12202028,52022007,51905510)the National Science and Technology Major Project(Grant Nos.J2019-IV-0009-0077,J2019-IV-0006-0074,J2019-IV-0016-0084).
文摘In this work,heat treatment experiments at 1050 and 1100℃were carried out on single-crystal su-peralloy specimens coated with the electron beam physical vapor deposition(EB-PVD)thermal barrier coating(TBC)system.Furthermore,the evolution of microstructural characteristics and sintering-induced mechanical properties were separately obtained by the field emission scanning electron microscope(FE-SEM)and nanoindenter,providing inputs for damage modeling.Meanwhile,the critical compressive strain of TBCs at room temperature was acquired using 3D digital image correlation(3D-DIC)technology to characterize the interfacial damage combined with the experimentally observed buckling modes.The re-sults demonstrate that not only does oxidative damage exist in the TBCs system due to thermally grown oxide(TGO)growth,but additional damage is generated by thermal cycling and sintering behavior,re-spectively.Then,a nonlinear cumulative interfacial damage model considering multiple failure factors is developed to predict TBCs’life.The error between the measured damage and calculated damage is less than 15%,showing good prediction accuracy.
基金the Deutsche Forschungsgemeinschaft(DFG)for financial support(MO 848/18-2)。
文摘The deformation mechanisms and dynamic recrystallization(DRX)behavior of specifically grown bicrystals with a symmetric 90°<1010>and 90°<1120>tilt grain boundary,respectively,were investigated under deformation in plane strain compression at 200℃and 400℃.The microstructures were analyzed by panoramic optical microscopy and large-area electron backscatter diffraction(EBSD)orientation mapping.The analysis employed a meticulous approach utilizing hundreds of individual,small EBSD maps with a small step size that were stitched together to provide comprehensive access to orientation and misorientation data on a macroscopic scale.Basal slip primarily governed the early stages of deformation at the two temperatures,and the resulting shear induced lattice rotation around the transverse direction(TD)of the sample.The existence of the grain boundary gave rise to dislocation pile-up in its vicinity,leading to much larger TD-lattice rotations within the boundary region compared to the bulk.With increasing temperature,the deformation was generally more uniform towards the bulk due to enhanced dislocation mobility and more uniform stress distribution.Dynamic recrystallization at 200℃was initiated in{1011}-compression twins at strains of 40%and higher.At 400℃,DRX consumed the entire grain boundary region and gradually replaced the deformed microstructure with progressing deformation.The recrystallized grains displayed characteristic orientations,such that their c-axes were perpendicular to the TD and additionally scattered between 0°and 60°from the loading axis.These recrystallized grains displayed mutual rotations of up to 30°around the c-axes of the initial grains,forming a discernible basal fiber texture component,prominently visible in the{1120}pole figure.It is noteworthy that the deformation and DRX behaviors of the two analyzed bicrystals exhibited marginal variations in response to strain and deformation temperature.
基金supported by the National ScienceTechnology Support Plan Projects of China, under Award No. 2015BAK16B02
文摘Pipelines in geological disaster regions typically suffer the risk of local buckling failure because of slender structure and complex load. This paper is meant to reveal the local buckling behavior of buried pipelines with a large diameter and high strength, which are under different conditions, including pure bending and bending combined with internal pressure. Finite element analysis was built according to previous data to study local buckling behavior of pressurized and unpressurized pipes under bending conditions and their differences in local buckling failure modes. In parametric analysis, a series of parameters,including pipe geometrical dimension, pipe material properties and internal pressure, were selected to study their influences on the critical bending moment, critical compressive stress and critical compressive strain of pipes.Especially the hardening exponent of pipe material was introduced to the parameter analysis by using the Ramberg–Osgood constitutive model. Results showed that geometrical dimensions, material and internal pressure can exert similar effects on the critical bending moment and critical compressive stress, which have different, even reverse effects on the critical compressive strain. Based on these analyses, more accurate design models of critical bending moment and critical compressive stress have been proposed for high-strength pipelines under bendingconditions, which provide theoretical methods for highstrength pipeline engineering.
