ObjectiveThe thesis aims at investigating the distribution and structural characteristics of various branches in canopy of Korla fragrant pear. MethodStatistic work and analysis were conducted on the numbers and distr...ObjectiveThe thesis aims at investigating the distribution and structural characteristics of various branches in canopy of Korla fragrant pear. MethodStatistic work and analysis were conducted on the numbers and distribution characteristics of various branches in each cubic lattice by using the canopy cellular method. ResultThe results showed that： The total number of scaffold branches of evacuation layered tree shape was 97, which mainly distributed in the lower layer and middle part of the canopy; the total number of scaffold branches of open-center tree shape was 94, which mainly distributed in the lower layer and middle part of the canopy. The total number of annual branches of evacuation layered tree shape was 3 920, which mainly distributed in the middle layer and outer part of the canopy; and the total number of annual branches of the open-center tree shape was 3 183, which mainly distributed in middle layer and outer part of the canopy. The total number of perennial branches of evacuation layered tree shape was 2 184, which mainly distributed in lower layer and outer part of the canopy; the total number of perennial branches of open-center tree shape was 1 444, which mainly distributed in middle layer and outer part of the canopy. ConclusionThe total number and the distribution positions of scaffold branches in the canopy of each tree shape were basically the same. The total numbers of annual branches of the two kinds of tree shapes were different, but the distribution positions were basically the same. The total numbers and the distribution positions of perennial branches in the canopy of the two kinds of tree shapes were different.展开更多
Despite the presence of Li F components in the solid electrolyte interphase(SEI)formed on the graphite anode surface by conventional electrolyte,these Li F components primarily exist in an amorphous state,rendering th...Despite the presence of Li F components in the solid electrolyte interphase(SEI)formed on the graphite anode surface by conventional electrolyte,these Li F components primarily exist in an amorphous state,rendering them incapable of effectively inhibiting the exchange reaction between lithium ions and transition metal ions in the electrolyte.Consequently,nearly all lithium ions within the SEI film are replaced by transition metal ions,resulting in an increase in interphacial impedance and a decrease in stability.Herein,we demonstrate that the SEI film,constructed by fluoroethylene carbonate(FEC)additive rich in crystalline Li F,effectively inhibits the undesired Li^(+)/Co^(2+)ion exchange reaction,thereby suppressing the deposition of cobalt compounds and metallic cobalt.Furthermore,the deposited cobalt compounds exhibit enhanced structural stability and reduced catalytic activity with minimal impact on the interphacial stability of the graphite anode.Our findings reveal the crucial influence of SEI film composition and structure on the deposition and hazards associated with transition metal ions,providing valuable guidance for designing next-generation electrolytes.展开更多
Patterns of woody regeneration in terms of species composition and diversity were studied in mixed deciduous forest (MDF) and deciduous dipterocarp forest (DDF) in Minbyin reserved forest of Lewe Township. A total of ...Patterns of woody regeneration in terms of species composition and diversity were studied in mixed deciduous forest (MDF) and deciduous dipterocarp forest (DDF) in Minbyin reserved forest of Lewe Township. A total of 57 plant species of MDF belonging to 28 families and 342 individuals and 25 plant species of DDF consist of 15 families and 285 individuals were identified. Plant species diversity was quantitatively higher in the MDF (H' = 3.68) compared to the DDF (H' = 2.39). Tectona grandis showed the highest density (30), dominance (4.40 m<sup>2</sup>) and IVI (27.01) of MDF and Dipterocarpus tuberculatus also composed the highest density (109), dominance (9.02 m<sup>2</sup>) and IVI (81.87) in DDF. The smallest diameter class (10 - 20 cm) comprised with 29 species, 103 individuals in MDF and 18 species, 85 individuals in DDF. The size class distribution displayed a reverse J-shaped pattern. The largest numbers of species were concentrated in the smallest height class in both investigated forests because of height and diameter distribution is closely related. The total densities of seedlings and saplings were 1219 and 531 ha<sup>-1</sup> in MDF and 988 and 444 ha<sup>-1</sup> in DDF respectively. Although soil texture of (40 - 50 cm) and (90 - 100 cm) were sandy clay loam in mixed deciduous forest, the other layers of both investigated forests were sandy loam.展开更多
The most of high/ultrahigh-pressure(HP/UHP)terranes of the world are characterized by the occurrence of numerous pods,lenses or layered blocks of eclogite and amphibolites(e.g.O’Brien,1997;Elvevold and Gilotti,2000;Z...The most of high/ultrahigh-pressure(HP/UHP)terranes of the world are characterized by the occurrence of numerous pods,lenses or layered blocks of eclogite and amphibolites(e.g.O’Brien,1997;Elvevold and Gilotti,2000;Zhang et al.,2003;and references there in).Field and petrological features suggest that amphibolites should展开更多
As the proportion of composite materials used in aircraft continues to increase, the electromagnetic Shielding Effectiveness (SE) of these materials becomes a critical factor in the electromagnetic safety design of ai...As the proportion of composite materials used in aircraft continues to increase, the electromagnetic Shielding Effectiveness (SE) of these materials becomes a critical factor in the electromagnetic safety design of aircraft structures. The assessment of electromagnetic SE for Slotted Composite Structures(SCSs) is particularly challenging due to their complex geometries and there remains a lack of suitable models for accurately predicting the SE performance of these intricate configurations. To address this issue, this paper introduces SCS-Net, a Deep Neural Network (DNN) method designed to accurately predict the SE of SCS. This method considers the impacts of various structural parameters, material properties and incident wave parameters on the SE of SCSs. In order to better model the SCS, an improved Nicolson-Ross-Weir (NRW) method is introduced in this paper to provide an equivalent flat structure for the SCS and to calculate the electromagnetic parameters of the equivalent structure. Additionally, the prediction of SE via DNNs is limited by insufficient test data, which hinders support for large-sample training. To address the issue of limited measured data, this paper develops a Measurement-Computation Fusion (MCF) dataset construction method. The predictions based on the simulation results show that the proposed method maintains an error of less than 0.07 dB within the 8–10 GHz frequency range. Furthermore, a new loss function based on the weighted L1-norm is established to improve the prediction accuracy for these parameters. Compared with traditional loss functions, the new loss function reduces the maximum prediction error for equivalent electromagnetic parameters by 47%. This method significantly improves the prediction accuracy of SCS-Net for measured data, with a maximum improvement of 23.88%. These findings demonstrate that the proposed method enables precise SE prediction and design for composite structures while reducing the number of test samples needed.展开更多
The damage distribution of the same type of aircraft in similar service environments should be similar. Based on this assumption, to perform the maintenance and repair of aircraft composite structures, the damage of c...The damage distribution of the same type of aircraft in similar service environments should be similar. Based on this assumption, to perform the maintenance and repair of aircraft composite structures, the damage of composite structures in a certain type of aircraft were investigated. The time-varying damage distribution model was established and verified based on the damage of a 16-aircraft fleet. The results show that the quantitative proportions of structural damage are 74% for skin delamination, 22% for stringer delamination and 3% for stringer-skin interface debonding. The amount of structural damages increases linearly with service time while the proportion of different damages does not change. As the service time increases, the geometric parameter distribution of damage for the same type of aircraft gradually converges, which can be approximated using the same function. There are certain differences in the proportion and geometric parameter distribution of damages among different components and locations, and the differences do not change over time.展开更多
Flow boiling in open microchannels offers highly efficient heat transfer performance and has attracted increasing attention in the fields of heat transfer and thermalmanagement of electronic devices in recent years.Ho...Flow boiling in open microchannels offers highly efficient heat transfer performance and has attracted increasing attention in the fields of heat transfer and thermalmanagement of electronic devices in recent years.However,the continuous rise in power density of electronic components imposesmore stringent requirements on the heat transfer capability of microchannel flow boiling.HFE-7100,a dielectric coolant with favorable thermophysical properties,has become a focal point of research for enhancing flow boiling performance in open microchannels.The flow boiling heat transfer performance ofHFE-7100 was investigated in this study by fabricating micro-nano composite structures on the bottom surface of open microchannels using laser ablation technology.Based on visualization results,a comparative analysis was conducted on the bubble dynamics and flow pattern characteristics of HFE-7100 flow boiling in micronano structured open microchannels(MNSOMC)and smooth-surface open microchannels(SSOMC),to elucidate the enhancement mechanism of micro-nano structures on flow boiling heat transfer in open microchannels.The results indicate that the surface structures and strong wettability of MNSOMC accelerated bubble nucleation and departure.Moreover,bubbles in the channel tended to coalesce along the flow direction,forming elongated slug bubbles with high aspect ratios,which enabled efficient thin film evaporation in conjunction with intense nucleate boiling,thereby significantly enhancing flow boiling heat transfer.Under the experimental conditions of this study,the maximum enhancements in the heat transfer coefficient(HTC)and critical heat flux(CHF)of HFE-7100 inMNSOMC were 33.4%and 133.1%,respectively,with the CHF reaching up to 1542.3 kW⋅m^(−2).Furthermore,due to the superior wettability and capillary wicking capability of the micro-nano composite structures,the significant enhancement in flow boiling heat transfer was achieved without incurring a noticeable pressure drop penalty.展开更多
Interlayer friction stir processing(FSP)has been proved to be an efective method of enhancing the mechanical properties of wire arc-directed energy deposited(WA-DED)samples.However,the original deposition structure wa...Interlayer friction stir processing(FSP)has been proved to be an efective method of enhancing the mechanical properties of wire arc-directed energy deposited(WA-DED)samples.However,the original deposition structure was still retained in the FSP-WA-DED component besides the processed zone(PZ),thus forming a composite structure.Considering the material utilization and practical service process of the deposited component,more attention should be paid on this special composite structure,but the relevant investigation has not been carried out.In this study,an Al–Mg–Sc alloy was prepared by WA-DED with interlayer FSP treatment,and the composite structure was frstly investigated.Almost all of the pores were eliminated under the pressure efect from the tool shoulder.The grains were further refned with an average size of about 1.2μm in the PZ.Though no severe plastic deformation was involved in the retained WA-DED deposition zone,comparable tensile properties with the PZ sample were obtained in the composite structure.Low ultimate tensile strength(UTS)of 289 MPa and elongation of 3.2%were achieved in the WA-DED sample.After interlayer FSP treatment,the UTS and elongation of the PZ samples were signifcantly increased to 443 MPa and 16.3%,while those in the composite structure remained at relatively high levels of 410 MPa and 13.5%,respectively.Meanwhile,a high fatigue strength of 180 and 130 MPa was obtained in the PZ and composite structure samples,which was clearly higher than that of the WA-DED sample(100 MPa).It is concluded that the defects in traditional WA-DED process can be eliminated in the composite structure after interlayer FSP treatment,resulting in enhanced tensile and fatigue properties,which provides an efective method of improving the mechanical properties of the WA-DED sample.展开更多
The compression and energy absorption properties of foam geopolymers increase stress wave attenuation under explosion impacts,reducing the vibration effect on the structure.Explosion tests were conducted using several...The compression and energy absorption properties of foam geopolymers increase stress wave attenuation under explosion impacts,reducing the vibration effect on the structure.Explosion tests were conducted using several composite structure models,including a concrete lining structure(CLS)without foam geopolymer and six foam geopolymer composite structures(FGCS)with different backfill parameters,to study the dynamic response and wave dissipation mechanisms of FGCS under explosive loading.Pressure,strain,and vibration responses at different locations were synchronously tested.The damage modes and dynamic responses of different models were compared,and how wave elimination and energy absorption efficiencies were affected by foam geopolymer backfill parameters was analyzed.The results showed that the foam geopolymer absorbed and dissipated the impact energy through continuous compressive deformation under high strain rates and dynamic loading,reducing the strain in the liner structure by 52%and increasing the pressure attenuation rate by 28%.Additionally,the foam geopolymer backfill reduced structural vibration and liner deformation,with the FGCS structure showing 35%less displacement and 70%less acceleration compared to the CLS.The FGCS model with thicker,less dense foam geopolymer backfill,having more pores and higher porosity,demonstrated better compression and energy absorption under dynamic impact,increasing stress wave attenuation efficiency.By analyzing the stress wave propagation and the compression characteristics of the porous medium,it was concluded that the stress transfer ratio of FGCS-ρ-579 was 77%lower than that of CLS,and the transmitted wave energy was 90%lower.The results of this study provide a scientific basis for optimizing underground composite structure interlayer parameters.展开更多
In this study,the free vibration of a piezoelectric semiconductor(PS)composite structure composed of a PS layer,a fractional viscoelastic layer,and an elastic substrate with simply-supported boundary conditions is inv...In this study,the free vibration of a piezoelectric semiconductor(PS)composite structure composed of a PS layer,a fractional viscoelastic layer,and an elastic substrate with simply-supported boundary conditions is investigated.The fractional derivative Zener model is used to establish the constitutive relation of the viscoelastic layer.The first-order shear deformation theory and Hamilton's principle are used to derive the motion equations of the present problem.The frequency parameter is numerically resolved with the Newton-Raphson method through the eigenvalue equation.The effects of either geometric parameters,carrier density,and electric voltage applied on the surface of the composite structure or the fractional order of the Zener model on both the natural frequency and loss factor are discussed,and some interesting conclusions are drawn.This work will be helpful for designing and manufacturing PS materials and structures.展开更多
The stability of the“surrounding rock-backfill”com posite system is crucial for the safety of mining stopes.This study systematically investigates the effects of steel slag(SS)content and interface angle on the stre...The stability of the“surrounding rock-backfill”com posite system is crucial for the safety of mining stopes.This study systematically investigates the effects of steel slag(SS)content and interface angle on the strength and failure characteristics of rock and SS-cemented paste backfill composite specimens(RBCS)through uniaxial compression strength tests(UCS),acoustic emission systems(AE),and 3 D digital image correlation monitoring technology(3 D-DIC).The intrinsic mechanism by which SS content influences the strength of SS-CPB was revealed through an analysis of its hydration reaction degree and microstructural characteristics under varying SS content.Moreover,a theoretical strength model incorporating different interface angles was developed to explore the impact of interface inclination on failure modes and mechanical strength.The main conclusions are as follows:The incorporation of SS enhances the plastic characteristics of RBCS and reduces its brittleness,with the increase of SS content,the stress-strain curve of RBCS in the“staircase-like”stag e becomes smoother;When the interface angle is 45°,the RBCS stress-strain curve exhibits a bimodal feature,and the failure mode changes from Y-shaped fractures to interface and axial splitting;The addition of SS results in a reduction of hydration products such as Ca(OH)_(2) in the backfill cementing system and an increase in harmful pores,which weakens the bonding performance and strength of RBCS,and the SS content should not exceed 45%;As the interface angle increases,the strength of RBCS decreases,and the critical interface slip angle decreases first and then increases with the increase in the E S/E R ratio.This study provides technical references for the large-scale application of SS in mine backfill.展开更多
This paper presents a deep learning-based topology optimization method for the joint design of material layout and fiber orientation in continuous fiber-reinforced composite structure(CFRCS).The proposed method mainly...This paper presents a deep learning-based topology optimization method for the joint design of material layout and fiber orientation in continuous fiber-reinforced composite structure(CFRCS).The proposed method mainly includes three steps:(1)a ResUNet-involved generative and adversarial network(ResUNet-GAN)is developed to establish the end-to-end mapping from structural design parameters to fiber-reinforced composite optimized structure,and a fiber orientation chromatogram is presented to represent continuous fiber angles;(2)to avoid the local optimum problem,the independent continuous mapping method(ICM method)considering the improved principal stress orientation interpolated continuous fiber angle optimization(PSO-CFAO)strategy is utilized to construct CFRCS topology optimization dataset;(3)the well-trained ResUNet-GAN is deployed to design the optimal structural material distribution together with the corresponding continuous fiber orientations.Numerical simulations for benchmark structure verify that the proposed method greatly improves the design efficiency of CFRCS along with high design accuracy.Furthermore,the CFRCS topology configuration designed by ResUNet-GAN is fabricated by additive manufacturing.Compression experiments of the specimens show that both the stiffness structure and peak load of the CFRCS topology configuration designed by the proposed method have significantly enhanced.The proposed deep learning-based topology optimization method will provide great flexibility in CFRCS for engineering applications.展开更多
Insufficient metallurgical compatibility between Zr and Ni can lead to the formation of brittle welds and introduce thermal stress-related challenges during the electron beam welding process.Through the implementation...Insufficient metallurgical compatibility between Zr and Ni can lead to the formation of brittle welds and introduce thermal stress-related challenges during the electron beam welding process.Through the implementation of beam deflection and vibration,a transformation was achieved in the primary Ni_(5)Zr dendrite structure,transitioning from a mass into a layered configuration,consequently resulting in the formation of an ultrafine-grained eutectic−dendrite complex structure.It is revealed that the enhanced strength−ductility synergy of this structure significantly contributes to the high tensile strength and improved plasticity observed in the welded joints.As a result,the welding cracks are effectively mitigated,and notable advancements are achieved in the mechanical properties of Zr/Ni joints,elevating the tensile strength of the joints from 36.4 to 189 MPa.This research not only highlights the potential of this technique in enhancing the strength and ductility of Zr/Ni welded joints but also serves as a valuable reference for future investigations involving welding applications of dissimilar metals.展开更多
Aiming at addressing the issues of unclear dynamic response mechanisms and insufficient quantification of temperature coupling effects in building structures under long-duration blast loads,this study investigates typ...Aiming at addressing the issues of unclear dynamic response mechanisms and insufficient quantification of temperature coupling effects in building structures under long-duration blast loads,this study investigates typical composite beam-slab structures through integrated blast shock tube experiments and multiscale numerical simulations using Voronoi-coupled Finite-Discrete Element Method(VoroFDEM).The research systematically reveals the dynamic response mechanisms and damage evolution patterns of composite beam-slab structures subjected to prolonged blast loading.An environmenttemperature-coupled P-I curve damage assessment system is established,and a rapid evaluation method based on image crack characteristics is proposed,achieving innovative transition from traditional mechanical indicators to intelligent recognition paradigms.Results demonstrate that composite beam-slab structures exhibit three-phase failure modes:elastic vibration,plastic hinge formation,and global collapse.Numerical simulations identify the brittle-to-ductile transition temperature threshold at-10℃,and establish a temperature-dependent piecewise function-based P-I curve prediction model,whose overpressure asymptote displays nonlinear temperature sensitivity within-50-30℃.A novel dual-mode evaluation methodology integrating Voro-FDEM numerical simulations with image-based damage feature recognition is developed,enabling quantitative mapping between crack area and destruction levels.These findings provide theoretical foundations and technical pathways for rapid blast damage assessment and protective engineering design.展开更多
Controlled photocatalytic conversion of CO_(2) into premium fuel such as methane(CH4)offers a sustainable pathway towards a carbon energy cycle.However,the photocatalytic efficiency and selectivity are still unsatisfa...Controlled photocatalytic conversion of CO_(2) into premium fuel such as methane(CH4)offers a sustainable pathway towards a carbon energy cycle.However,the photocatalytic efficiency and selectivity are still unsatisfactory due to the limited availability of active sites on the current photocatalysts.To resolve this issue,the design of oxygen vacancies(OVs)in metal-oxide semiconductors is an effective option.Herein,in situ deposition of TiO_(2) onto SiO_(2) nanospheres to construct a SiO_(2)@TiO_(2) core-shell structure was performed to modulate the oxygen vacancy concentrations.Meanwhile,charge redistribution led to the formation of abundant OV-regulated Ti-Ti(Ti-OV-Ti)dual sites.It is revealed that Ti-OV-Ti dual sites served as the key active site for capturing the photogenerated electrons during light-driven CO_(2) reduction reaction(CO_(2)RR).Such electron-rich active sites enabled efficient CO_(2) adsorption and activation,thus lowering the energy barrier associated with the rate-determining step.More importantly,the formation of a highly stable*CHO intermediate at Ti-OV-Ti dual sites energetically favored the reaction pathway towards the production of CH4 rather than CO,thereby facilitating the selective product of CH_(4).As a result,SiO_(2)@TiO_(2)-50 with an optimized oxygen vacancy concentration of 9.0% showed a remarkable selectivity(90.32%)for CH_(4) production with a rate of 13.21μmol g^(-1) h^(-1),which is 17.38-fold higher than that of pristine TiO_(2).This study provides a new avenue for engineering superior photocatalysts through a rational methodology towards selective reduction of CO_(2).展开更多
1.Introduction The strength-ductility trade-offdilemma has long been a per-sistent challenge in Al matrix composites(AMCs)[1,2].This is-sue primarily arises from the agglomeration of reinforcements at the grain bounda...1.Introduction The strength-ductility trade-offdilemma has long been a per-sistent challenge in Al matrix composites(AMCs)[1,2].This is-sue primarily arises from the agglomeration of reinforcements at the grain boundaries(GBs),which restricts local plastic flow dur-ing the plastic deformation and leads to stress concentration[3,4].Recently,the development of concepts aimed at achieving hetero-geneous grain has emerged as a promising approach for enhanc-ing comprehensive mechanical properties[5,6].展开更多
An effective optimization method for the shape/sizing design of composite wing structures is presented with satisfying weight-cutting results. After decoupling, a kind of two-layer cycled optimization strategy suitabl...An effective optimization method for the shape/sizing design of composite wing structures is presented with satisfying weight-cutting results. After decoupling, a kind of two-layer cycled optimization strategy suitable for these integrated shape/sizing optimization is obtained. The uniform design method is used to provide sample points, and approximation models for shape design variables. And the results of sizing optimization are construct- ed with the quadratic response surface method （QRSM）. The complex method based on QRSM is used to opti- mize the shape design variables and the criteria method is adopted to optimize the sizing design variables. Compared with the conventional method, the proposed algorithm is more effective and feasible for solving complex composite optimization problems and has good efficiency in weight cutting.展开更多
The samples of brazed diamond grits with NiCr brazing alloy are prepared in vacuum and argon gas. The microstructures are analyzed with scanning electron microscope （SEM）, energy dispersive X-ray spectroscopy （EDS...The samples of brazed diamond grits with NiCr brazing alloy are prepared in vacuum and argon gas. The microstructures are analyzed with scanning electron microscope （SEM）, energy dispersive X-ray spectroscopy （EDS） and X-ray diffraction（XRD）. The effects of brazing atmospheres on the as-brazed NiCr brazing alloy composite structures and interracial microstructure are studied between diamond grits and brazing alloy. Results show that： （1） There are different composite structures of as-brazed NiCr brazing alloy under different oxygen partial pressures in vacuum and argon gas. B203 exists on the surface of the brazed samples under argon gas furnace brazing. It indicates that oxygen plays an important role in the resultants of as-brazed NiCr brazing alloy during the brazing process. （2） There are different interfacial microstructures in different brazing atmospheres, but the main reaction product is chromium carbides. The chromium carbides in argon gas furnace brazing grow in a disordered form, but those in vacuum furnace brazing grow radiated. And the scale of grains in argon gas is smaller than those in vacuum.展开更多
Flaxseed lignan macromolecules(FLM)are a class of important secondary metabolites in fl axseed,which have been widely concerned due to their biological and pharmacological properties,especially for their antioxidative...Flaxseed lignan macromolecules(FLM)are a class of important secondary metabolites in fl axseed,which have been widely concerned due to their biological and pharmacological properties,especially for their antioxidative activity.For the composition and structure of FLM,our results confirmed that ferulic acid glycoside(FerAG)was directly ester-linked with herbacetin diglucoside(HDG)or pinoresinol diglucoside(PDG),which might determine the beginning of FLM biosynthesis.Additionally,p-coumaric acid glycoside(CouAG)might determine the end of chain extension during FLM synthesis in fl axseed.FLM exhibited higher antioxidative activity in polar systems,as shown by its superior 1,1-diphenyl-2-picrylhydrazyl(DPPH)free radical scavenging capacity compared to the 2,2’-azinobis(3-ehtylbenzothiazolin-6-sulfnic acid)(ABTS)cation free radical scavenging capacity in non-polar systems.Moreover,the antioxidative activity of FLM was found to be highly dependent on its composition and structure.In particular,it was positively correlated with the number of phenolic hydroxyl groups(longer FLM chains)and inversely related to the steric hindrance at the ends(lower levels of FerAG and CouAG).These fi ndings verifi ed the potential application of FLM in nonpolar systems,particularly in functional food emulsions。展开更多
A two-step method is proposed for detection and identification of invisible impact damage in composite structure under temperature changes using Lamb waves.First,a statistical outlier analysis is employed to distingui...A two-step method is proposed for detection and identification of invisible impact damage in composite structure under temperature changes using Lamb waves.First,a statistical outlier analysis is employed to distinguish whether the changes of Lamb wave signals are induced by damage within a monitoring area or are only affected by temperature changes.Damage indices are defined after the Lamb wave signals are processed by Fourier transform,and a Monte Carlo procedure is used to obtain the damage threshold value for the damage indices at the undamaged state.If the damage indices in the operation state exceed the threshold value,the presence of damage is determined.Then,a probabilistic damage imaging algorithm displaying probabilities of the presence of damage within the monitoring area is adopted to fuse information collected from multiple actuator-sensor paths to identify the location of damage.Damage indices under damaged state are used to generate the diagnostic image.Experimental study on a stiffened composite panel with random temperature changes is performed to demonstrate the effectiveness of the proposed method.展开更多
基金Supported by National Department Public Benefit Research Foundation(201304701-4)Science and Technology Planning Program of Xinjiang Uygur Autonomous RegionXinjiang Uygur Autonomous Region Fruit Major Subjects~~
文摘ObjectiveThe thesis aims at investigating the distribution and structural characteristics of various branches in canopy of Korla fragrant pear. MethodStatistic work and analysis were conducted on the numbers and distribution characteristics of various branches in each cubic lattice by using the canopy cellular method. ResultThe results showed that： The total number of scaffold branches of evacuation layered tree shape was 97, which mainly distributed in the lower layer and middle part of the canopy; the total number of scaffold branches of open-center tree shape was 94, which mainly distributed in the lower layer and middle part of the canopy. The total number of annual branches of evacuation layered tree shape was 3 920, which mainly distributed in the middle layer and outer part of the canopy; and the total number of annual branches of the open-center tree shape was 3 183, which mainly distributed in middle layer and outer part of the canopy. The total number of perennial branches of evacuation layered tree shape was 2 184, which mainly distributed in lower layer and outer part of the canopy; the total number of perennial branches of open-center tree shape was 1 444, which mainly distributed in middle layer and outer part of the canopy. ConclusionThe total number and the distribution positions of scaffold branches in the canopy of each tree shape were basically the same. The total numbers of annual branches of the two kinds of tree shapes were different, but the distribution positions were basically the same. The total numbers and the distribution positions of perennial branches in the canopy of the two kinds of tree shapes were different.
基金supported by the National Natural Science Foundation of China(21972049,21573080)。
文摘Despite the presence of Li F components in the solid electrolyte interphase(SEI)formed on the graphite anode surface by conventional electrolyte,these Li F components primarily exist in an amorphous state,rendering them incapable of effectively inhibiting the exchange reaction between lithium ions and transition metal ions in the electrolyte.Consequently,nearly all lithium ions within the SEI film are replaced by transition metal ions,resulting in an increase in interphacial impedance and a decrease in stability.Herein,we demonstrate that the SEI film,constructed by fluoroethylene carbonate(FEC)additive rich in crystalline Li F,effectively inhibits the undesired Li^(+)/Co^(2+)ion exchange reaction,thereby suppressing the deposition of cobalt compounds and metallic cobalt.Furthermore,the deposited cobalt compounds exhibit enhanced structural stability and reduced catalytic activity with minimal impact on the interphacial stability of the graphite anode.Our findings reveal the crucial influence of SEI film composition and structure on the deposition and hazards associated with transition metal ions,providing valuable guidance for designing next-generation electrolytes.
文摘Patterns of woody regeneration in terms of species composition and diversity were studied in mixed deciduous forest (MDF) and deciduous dipterocarp forest (DDF) in Minbyin reserved forest of Lewe Township. A total of 57 plant species of MDF belonging to 28 families and 342 individuals and 25 plant species of DDF consist of 15 families and 285 individuals were identified. Plant species diversity was quantitatively higher in the MDF (H' = 3.68) compared to the DDF (H' = 2.39). Tectona grandis showed the highest density (30), dominance (4.40 m<sup>2</sup>) and IVI (27.01) of MDF and Dipterocarpus tuberculatus also composed the highest density (109), dominance (9.02 m<sup>2</sup>) and IVI (81.87) in DDF. The smallest diameter class (10 - 20 cm) comprised with 29 species, 103 individuals in MDF and 18 species, 85 individuals in DDF. The size class distribution displayed a reverse J-shaped pattern. The largest numbers of species were concentrated in the smallest height class in both investigated forests because of height and diameter distribution is closely related. The total densities of seedlings and saplings were 1219 and 531 ha<sup>-1</sup> in MDF and 988 and 444 ha<sup>-1</sup> in DDF respectively. Although soil texture of (40 - 50 cm) and (90 - 100 cm) were sandy clay loam in mixed deciduous forest, the other layers of both investigated forests were sandy loam.
文摘The most of high/ultrahigh-pressure(HP/UHP)terranes of the world are characterized by the occurrence of numerous pods,lenses or layered blocks of eclogite and amphibolites(e.g.O’Brien,1997;Elvevold and Gilotti,2000;Zhang et al.,2003;and references there in).Field and petrological features suggest that amphibolites should
基金supported by the National Natural Science Foundation of China(Nos.62101020 and 62141405)the Special Scientific Research Project of Civil Aircraft,China(No.MJZ5-2N22).
文摘As the proportion of composite materials used in aircraft continues to increase, the electromagnetic Shielding Effectiveness (SE) of these materials becomes a critical factor in the electromagnetic safety design of aircraft structures. The assessment of electromagnetic SE for Slotted Composite Structures(SCSs) is particularly challenging due to their complex geometries and there remains a lack of suitable models for accurately predicting the SE performance of these intricate configurations. To address this issue, this paper introduces SCS-Net, a Deep Neural Network (DNN) method designed to accurately predict the SE of SCS. This method considers the impacts of various structural parameters, material properties and incident wave parameters on the SE of SCSs. In order to better model the SCS, an improved Nicolson-Ross-Weir (NRW) method is introduced in this paper to provide an equivalent flat structure for the SCS and to calculate the electromagnetic parameters of the equivalent structure. Additionally, the prediction of SE via DNNs is limited by insufficient test data, which hinders support for large-sample training. To address the issue of limited measured data, this paper develops a Measurement-Computation Fusion (MCF) dataset construction method. The predictions based on the simulation results show that the proposed method maintains an error of less than 0.07 dB within the 8–10 GHz frequency range. Furthermore, a new loss function based on the weighted L1-norm is established to improve the prediction accuracy for these parameters. Compared with traditional loss functions, the new loss function reduces the maximum prediction error for equivalent electromagnetic parameters by 47%. This method significantly improves the prediction accuracy of SCS-Net for measured data, with a maximum improvement of 23.88%. These findings demonstrate that the proposed method enables precise SE prediction and design for composite structures while reducing the number of test samples needed.
文摘The damage distribution of the same type of aircraft in similar service environments should be similar. Based on this assumption, to perform the maintenance and repair of aircraft composite structures, the damage of composite structures in a certain type of aircraft were investigated. The time-varying damage distribution model was established and verified based on the damage of a 16-aircraft fleet. The results show that the quantitative proportions of structural damage are 74% for skin delamination, 22% for stringer delamination and 3% for stringer-skin interface debonding. The amount of structural damages increases linearly with service time while the proportion of different damages does not change. As the service time increases, the geometric parameter distribution of damage for the same type of aircraft gradually converges, which can be approximated using the same function. There are certain differences in the proportion and geometric parameter distribution of damages among different components and locations, and the differences do not change over time.
基金funded by the National Natural Science Foundation of China(Grant No.52276047)the Open Fund of NationalKey Laboratory of SpacecraftThermal Control(Grant No.NKLST-JJ-202401011)the Beijing Municipal Science&Technology Commission(Grant No.Z231100006123010).
文摘Flow boiling in open microchannels offers highly efficient heat transfer performance and has attracted increasing attention in the fields of heat transfer and thermalmanagement of electronic devices in recent years.However,the continuous rise in power density of electronic components imposesmore stringent requirements on the heat transfer capability of microchannel flow boiling.HFE-7100,a dielectric coolant with favorable thermophysical properties,has become a focal point of research for enhancing flow boiling performance in open microchannels.The flow boiling heat transfer performance ofHFE-7100 was investigated in this study by fabricating micro-nano composite structures on the bottom surface of open microchannels using laser ablation technology.Based on visualization results,a comparative analysis was conducted on the bubble dynamics and flow pattern characteristics of HFE-7100 flow boiling in micronano structured open microchannels(MNSOMC)and smooth-surface open microchannels(SSOMC),to elucidate the enhancement mechanism of micro-nano structures on flow boiling heat transfer in open microchannels.The results indicate that the surface structures and strong wettability of MNSOMC accelerated bubble nucleation and departure.Moreover,bubbles in the channel tended to coalesce along the flow direction,forming elongated slug bubbles with high aspect ratios,which enabled efficient thin film evaporation in conjunction with intense nucleate boiling,thereby significantly enhancing flow boiling heat transfer.Under the experimental conditions of this study,the maximum enhancements in the heat transfer coefficient(HTC)and critical heat flux(CHF)of HFE-7100 inMNSOMC were 33.4%and 133.1%,respectively,with the CHF reaching up to 1542.3 kW⋅m^(−2).Furthermore,due to the superior wettability and capillary wicking capability of the micro-nano composite structures,the significant enhancement in flow boiling heat transfer was achieved without incurring a noticeable pressure drop penalty.
基金supported by the National Natural Science Foundation of China(No.U23A20538)the Fundamental Research Funds for the Universities of Liaoning Province,Shenyang U40 Outstanding Youth Foundation(No.RC230864)+1 种基金the Foundation of CAS Henan Industrial Technology Innovation&Incubation Center(No.2024110)the Natural Science Foundation of Liaoning Province(No.2023-BS-016)。
文摘Interlayer friction stir processing(FSP)has been proved to be an efective method of enhancing the mechanical properties of wire arc-directed energy deposited(WA-DED)samples.However,the original deposition structure was still retained in the FSP-WA-DED component besides the processed zone(PZ),thus forming a composite structure.Considering the material utilization and practical service process of the deposited component,more attention should be paid on this special composite structure,but the relevant investigation has not been carried out.In this study,an Al–Mg–Sc alloy was prepared by WA-DED with interlayer FSP treatment,and the composite structure was frstly investigated.Almost all of the pores were eliminated under the pressure efect from the tool shoulder.The grains were further refned with an average size of about 1.2μm in the PZ.Though no severe plastic deformation was involved in the retained WA-DED deposition zone,comparable tensile properties with the PZ sample were obtained in the composite structure.Low ultimate tensile strength(UTS)of 289 MPa and elongation of 3.2%were achieved in the WA-DED sample.After interlayer FSP treatment,the UTS and elongation of the PZ samples were signifcantly increased to 443 MPa and 16.3%,while those in the composite structure remained at relatively high levels of 410 MPa and 13.5%,respectively.Meanwhile,a high fatigue strength of 180 and 130 MPa was obtained in the PZ and composite structure samples,which was clearly higher than that of the WA-DED sample(100 MPa).It is concluded that the defects in traditional WA-DED process can be eliminated in the composite structure after interlayer FSP treatment,resulting in enhanced tensile and fatigue properties,which provides an efective method of improving the mechanical properties of the WA-DED sample.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52378401,12202494)the Fundamental Research Funds for the Central Universities(Grant No.30922010918)。
文摘The compression and energy absorption properties of foam geopolymers increase stress wave attenuation under explosion impacts,reducing the vibration effect on the structure.Explosion tests were conducted using several composite structure models,including a concrete lining structure(CLS)without foam geopolymer and six foam geopolymer composite structures(FGCS)with different backfill parameters,to study the dynamic response and wave dissipation mechanisms of FGCS under explosive loading.Pressure,strain,and vibration responses at different locations were synchronously tested.The damage modes and dynamic responses of different models were compared,and how wave elimination and energy absorption efficiencies were affected by foam geopolymer backfill parameters was analyzed.The results showed that the foam geopolymer absorbed and dissipated the impact energy through continuous compressive deformation under high strain rates and dynamic loading,reducing the strain in the liner structure by 52%and increasing the pressure attenuation rate by 28%.Additionally,the foam geopolymer backfill reduced structural vibration and liner deformation,with the FGCS structure showing 35%less displacement and 70%less acceleration compared to the CLS.The FGCS model with thicker,less dense foam geopolymer backfill,having more pores and higher porosity,demonstrated better compression and energy absorption under dynamic impact,increasing stress wave attenuation efficiency.By analyzing the stress wave propagation and the compression characteristics of the porous medium,it was concluded that the stress transfer ratio of FGCS-ρ-579 was 77%lower than that of CLS,and the transmitted wave energy was 90%lower.The results of this study provide a scientific basis for optimizing underground composite structure interlayer parameters.
基金supported by the National Natural Science Foundation of China(No.12372153)the Funding by Guangdong Basic and Applied Basic Research Foundation(No.2023A1515012366)。
文摘In this study,the free vibration of a piezoelectric semiconductor(PS)composite structure composed of a PS layer,a fractional viscoelastic layer,and an elastic substrate with simply-supported boundary conditions is investigated.The fractional derivative Zener model is used to establish the constitutive relation of the viscoelastic layer.The first-order shear deformation theory and Hamilton's principle are used to derive the motion equations of the present problem.The frequency parameter is numerically resolved with the Newton-Raphson method through the eigenvalue equation.The effects of either geometric parameters,carrier density,and electric voltage applied on the surface of the composite structure or the fractional order of the Zener model on both the natural frequency and loss factor are discussed,and some interesting conclusions are drawn.This work will be helpful for designing and manufacturing PS materials and structures.
基金Project(52308316)supported by the National Natural Science Foundation of China,Project(BBJ2024088)supported by the Fundamental Research Funds for the Central Universities(PhD.Top Innovative Talents Fund of CUMTB),China。
文摘The stability of the“surrounding rock-backfill”com posite system is crucial for the safety of mining stopes.This study systematically investigates the effects of steel slag(SS)content and interface angle on the strength and failure characteristics of rock and SS-cemented paste backfill composite specimens(RBCS)through uniaxial compression strength tests(UCS),acoustic emission systems(AE),and 3 D digital image correlation monitoring technology(3 D-DIC).The intrinsic mechanism by which SS content influences the strength of SS-CPB was revealed through an analysis of its hydration reaction degree and microstructural characteristics under varying SS content.Moreover,a theoretical strength model incorporating different interface angles was developed to explore the impact of interface inclination on failure modes and mechanical strength.The main conclusions are as follows:The incorporation of SS enhances the plastic characteristics of RBCS and reduces its brittleness,with the increase of SS content,the stress-strain curve of RBCS in the“staircase-like”stag e becomes smoother;When the interface angle is 45°,the RBCS stress-strain curve exhibits a bimodal feature,and the failure mode changes from Y-shaped fractures to interface and axial splitting;The addition of SS results in a reduction of hydration products such as Ca(OH)_(2) in the backfill cementing system and an increase in harmful pores,which weakens the bonding performance and strength of RBCS,and the SS content should not exceed 45%;As the interface angle increases,the strength of RBCS decreases,and the critical interface slip angle decreases first and then increases with the increase in the E S/E R ratio.This study provides technical references for the large-scale application of SS in mine backfill.
基金supported by the National Natural Science Foundation of China(Grant No.11872080)Beijing Natural Science Foundation(Grant No.3192005).
文摘This paper presents a deep learning-based topology optimization method for the joint design of material layout and fiber orientation in continuous fiber-reinforced composite structure(CFRCS).The proposed method mainly includes three steps:(1)a ResUNet-involved generative and adversarial network(ResUNet-GAN)is developed to establish the end-to-end mapping from structural design parameters to fiber-reinforced composite optimized structure,and a fiber orientation chromatogram is presented to represent continuous fiber angles;(2)to avoid the local optimum problem,the independent continuous mapping method(ICM method)considering the improved principal stress orientation interpolated continuous fiber angle optimization(PSO-CFAO)strategy is utilized to construct CFRCS topology optimization dataset;(3)the well-trained ResUNet-GAN is deployed to design the optimal structural material distribution together with the corresponding continuous fiber orientations.Numerical simulations for benchmark structure verify that the proposed method greatly improves the design efficiency of CFRCS along with high design accuracy.Furthermore,the CFRCS topology configuration designed by ResUNet-GAN is fabricated by additive manufacturing.Compression experiments of the specimens show that both the stiffness structure and peak load of the CFRCS topology configuration designed by the proposed method have significantly enhanced.The proposed deep learning-based topology optimization method will provide great flexibility in CFRCS for engineering applications.
基金supported by the National Natural Science Foundation of China(No.52375322).
文摘Insufficient metallurgical compatibility between Zr and Ni can lead to the formation of brittle welds and introduce thermal stress-related challenges during the electron beam welding process.Through the implementation of beam deflection and vibration,a transformation was achieved in the primary Ni_(5)Zr dendrite structure,transitioning from a mass into a layered configuration,consequently resulting in the formation of an ultrafine-grained eutectic−dendrite complex structure.It is revealed that the enhanced strength−ductility synergy of this structure significantly contributes to the high tensile strength and improved plasticity observed in the welded joints.As a result,the welding cracks are effectively mitigated,and notable advancements are achieved in the mechanical properties of Zr/Ni joints,elevating the tensile strength of the joints from 36.4 to 189 MPa.This research not only highlights the potential of this technique in enhancing the strength and ductility of Zr/Ni welded joints but also serves as a valuable reference for future investigations involving welding applications of dissimilar metals.
基金supported by Open Research Fund of State Key Laboratory of Target Vulnerability Assessment,Defense Engineering Institute,AMS,PLA(Grant No.YSX2024KFPG002)。
文摘Aiming at addressing the issues of unclear dynamic response mechanisms and insufficient quantification of temperature coupling effects in building structures under long-duration blast loads,this study investigates typical composite beam-slab structures through integrated blast shock tube experiments and multiscale numerical simulations using Voronoi-coupled Finite-Discrete Element Method(VoroFDEM).The research systematically reveals the dynamic response mechanisms and damage evolution patterns of composite beam-slab structures subjected to prolonged blast loading.An environmenttemperature-coupled P-I curve damage assessment system is established,and a rapid evaluation method based on image crack characteristics is proposed,achieving innovative transition from traditional mechanical indicators to intelligent recognition paradigms.Results demonstrate that composite beam-slab structures exhibit three-phase failure modes:elastic vibration,plastic hinge formation,and global collapse.Numerical simulations identify the brittle-to-ductile transition temperature threshold at-10℃,and establish a temperature-dependent piecewise function-based P-I curve prediction model,whose overpressure asymptote displays nonlinear temperature sensitivity within-50-30℃.A novel dual-mode evaluation methodology integrating Voro-FDEM numerical simulations with image-based damage feature recognition is developed,enabling quantitative mapping between crack area and destruction levels.These findings provide theoretical foundations and technical pathways for rapid blast damage assessment and protective engineering design.
基金supported by the National Natural Science Foundation of China(No.21773089,22202037)the Science and Technology Development Plan Project of Jilin Province,China(No.20240101192JC)the Fundamental Research Funds for the Central Universities(No.2412023QD019).
文摘Controlled photocatalytic conversion of CO_(2) into premium fuel such as methane(CH4)offers a sustainable pathway towards a carbon energy cycle.However,the photocatalytic efficiency and selectivity are still unsatisfactory due to the limited availability of active sites on the current photocatalysts.To resolve this issue,the design of oxygen vacancies(OVs)in metal-oxide semiconductors is an effective option.Herein,in situ deposition of TiO_(2) onto SiO_(2) nanospheres to construct a SiO_(2)@TiO_(2) core-shell structure was performed to modulate the oxygen vacancy concentrations.Meanwhile,charge redistribution led to the formation of abundant OV-regulated Ti-Ti(Ti-OV-Ti)dual sites.It is revealed that Ti-OV-Ti dual sites served as the key active site for capturing the photogenerated electrons during light-driven CO_(2) reduction reaction(CO_(2)RR).Such electron-rich active sites enabled efficient CO_(2) adsorption and activation,thus lowering the energy barrier associated with the rate-determining step.More importantly,the formation of a highly stable*CHO intermediate at Ti-OV-Ti dual sites energetically favored the reaction pathway towards the production of CH4 rather than CO,thereby facilitating the selective product of CH_(4).As a result,SiO_(2)@TiO_(2)-50 with an optimized oxygen vacancy concentration of 9.0% showed a remarkable selectivity(90.32%)for CH_(4) production with a rate of 13.21μmol g^(-1) h^(-1),which is 17.38-fold higher than that of pristine TiO_(2).This study provides a new avenue for engineering superior photocatalysts through a rational methodology towards selective reduction of CO_(2).
基金support by the National Natural Science Foundation of China(Grant Nos.U23A20546 and 52271010)the Chinese National Natural Science Fund for Distinguished Young Scholars(Grant No.52025015)the Natural Science Foundation of Tianjin City(No.21JCZDJC00510).
文摘1.Introduction The strength-ductility trade-offdilemma has long been a per-sistent challenge in Al matrix composites(AMCs)[1,2].This is-sue primarily arises from the agglomeration of reinforcements at the grain boundaries(GBs),which restricts local plastic flow dur-ing the plastic deformation and leads to stress concentration[3,4].Recently,the development of concepts aimed at achieving hetero-geneous grain has emerged as a promising approach for enhanc-ing comprehensive mechanical properties[5,6].
文摘An effective optimization method for the shape/sizing design of composite wing structures is presented with satisfying weight-cutting results. After decoupling, a kind of two-layer cycled optimization strategy suitable for these integrated shape/sizing optimization is obtained. The uniform design method is used to provide sample points, and approximation models for shape design variables. And the results of sizing optimization are construct- ed with the quadratic response surface method （QRSM）. The complex method based on QRSM is used to opti- mize the shape design variables and the criteria method is adopted to optimize the sizing design variables. Compared with the conventional method, the proposed algorithm is more effective and feasible for solving complex composite optimization problems and has good efficiency in weight cutting.
基金Supported by the National Natural Science Foundation of China(50475040)the Aeronautical Science Foundation of China(2005ZH52060)the Natural Science Foundation of Jiangsu Province(BK2006723)~~
文摘The samples of brazed diamond grits with NiCr brazing alloy are prepared in vacuum and argon gas. The microstructures are analyzed with scanning electron microscope （SEM）, energy dispersive X-ray spectroscopy （EDS） and X-ray diffraction（XRD）. The effects of brazing atmospheres on the as-brazed NiCr brazing alloy composite structures and interracial microstructure are studied between diamond grits and brazing alloy. Results show that： （1） There are different composite structures of as-brazed NiCr brazing alloy under different oxygen partial pressures in vacuum and argon gas. B203 exists on the surface of the brazed samples under argon gas furnace brazing. It indicates that oxygen plays an important role in the resultants of as-brazed NiCr brazing alloy during the brazing process. （2） There are different interfacial microstructures in different brazing atmospheres, but the main reaction product is chromium carbides. The chromium carbides in argon gas furnace brazing grow in a disordered form, but those in vacuum furnace brazing grow radiated. And the scale of grains in argon gas is smaller than those in vacuum.
基金support from National Natural Science Foundation of China(32072267)supported by China Agriculture Research System of CRAS-14.
文摘Flaxseed lignan macromolecules(FLM)are a class of important secondary metabolites in fl axseed,which have been widely concerned due to their biological and pharmacological properties,especially for their antioxidative activity.For the composition and structure of FLM,our results confirmed that ferulic acid glycoside(FerAG)was directly ester-linked with herbacetin diglucoside(HDG)or pinoresinol diglucoside(PDG),which might determine the beginning of FLM biosynthesis.Additionally,p-coumaric acid glycoside(CouAG)might determine the end of chain extension during FLM synthesis in fl axseed.FLM exhibited higher antioxidative activity in polar systems,as shown by its superior 1,1-diphenyl-2-picrylhydrazyl(DPPH)free radical scavenging capacity compared to the 2,2’-azinobis(3-ehtylbenzothiazolin-6-sulfnic acid)(ABTS)cation free radical scavenging capacity in non-polar systems.Moreover,the antioxidative activity of FLM was found to be highly dependent on its composition and structure.In particular,it was positively correlated with the number of phenolic hydroxyl groups(longer FLM chains)and inversely related to the steric hindrance at the ends(lower levels of FerAG and CouAG).These fi ndings verifi ed the potential application of FLM in nonpolar systems,particularly in functional food emulsions。
基金Supported by the Aeronautical Science Foundation of China(2008ZA52012)the Six Kinds of Excellent Talent Project in Jiangsu Province of China(2010JZ004)the Research Foundation of Nanjing University of Aeronautics and Astronautics(NS2010027)~~
文摘A two-step method is proposed for detection and identification of invisible impact damage in composite structure under temperature changes using Lamb waves.First,a statistical outlier analysis is employed to distinguish whether the changes of Lamb wave signals are induced by damage within a monitoring area or are only affected by temperature changes.Damage indices are defined after the Lamb wave signals are processed by Fourier transform,and a Monte Carlo procedure is used to obtain the damage threshold value for the damage indices at the undamaged state.If the damage indices in the operation state exceed the threshold value,the presence of damage is determined.Then,a probabilistic damage imaging algorithm displaying probabilities of the presence of damage within the monitoring area is adopted to fuse information collected from multiple actuator-sensor paths to identify the location of damage.Damage indices under damaged state are used to generate the diagnostic image.Experimental study on a stiffened composite panel with random temperature changes is performed to demonstrate the effectiveness of the proposed method.
