In this paper, the modification of double Laplace decomposition method is pro- posed for the analytical approximation solution of a coupled system of pseudo-parabolic equation with initial conditions. Some examples ar...In this paper, the modification of double Laplace decomposition method is pro- posed for the analytical approximation solution of a coupled system of pseudo-parabolic equation with initial conditions. Some examples are given to support our presented method. In addition, we prove the convergence of double Laplace transform decomposition method applied to our problems.展开更多
The multi-frequency and multi-dimensional adapted Runge-Kutta^NystrSm （ARKN） integrators, and multi-frequency and multi-dimensional extended Runge-Kutta-NystrSm （ERKN） integrators have been developed to efficientl...The multi-frequency and multi-dimensional adapted Runge-Kutta^NystrSm （ARKN） integrators, and multi-frequency and multi-dimensional extended Runge-Kutta-NystrSm （ERKN） integrators have been developed to efficiently solve multi-frequency oscillatory Hamiltonian systems. The aim of this paper is to analyze and derive high-order sym- plectic and symmetric composition methods based on the ARKN integrators and ERKN integrators. We first consider the symplecticity conditions for the multi-frequency and multi-dimensional ARKN integrators. We then analyze the symplecticity of the adjoint in- tegrators of the multi-frequency and multi^dimensional symplectic ARKN integrators and ERKN integrators, respectively. On the basis of the theoretical analysis and by using the idea of composition methods, we derive and propose four new high-order symplectic and symmetric methods for the multi-frequency oscillatory Hamiltonian systems. The numer- ical results accompanied in this paper quantitatively show the advantage and efficiency of the proposed high-order symplectic and symmetric methods.展开更多
We propose an efficient numerical method for two population models, based on the nonstandard finite difference （NSFD） schemes and composition methods with complex time steps. The NSFD scheme is able to give positive...We propose an efficient numerical method for two population models, based on the nonstandard finite difference （NSFD） schemes and composition methods with complex time steps. The NSFD scheme is able to give positive numerical solutions that satisfy the conservation law, which is a key property for biological population models. The accuracy is improved by using the composition methods with complex time steps. Numerical tests on the plankton nutrient model and whooping cough model are presented to show the efficiency and advantage of the proposed numerical method.展开更多
The density functional theory （DFT） is the most popular method for evaluating bond dis- sociation enthalpies （BDEs） of most molecules. Thus, we are committed to looking for alternative methods that can balance the...The density functional theory （DFT） is the most popular method for evaluating bond dis- sociation enthalpies （BDEs） of most molecules. Thus, we are committed to looking for alternative methods that can balance the computational cost and higher precision to the best for large systems. The performance of DFT, double-hybrid DFT, and high-level com- posite methods are examined. The tested sets contain monocyclic and polycyclic aromatic molecules, branched hydrocarbons, small inorganic molecules, etc. The results show that the mPW2PLYP and G4MP2 methods achieve reasonable agreement with the benchmark val- ues for most tested molecules, and the mean absolute deviations are 2.43 and 1.96 kcal/mol after excluding the BDEs of branched hydrocarbons. We recommend the G4MP2 is the most appropriate method for small systems （atoms number≤20）; the double-hybrid DFT methods are advised for large aromatic molecules in medium size （20≤atoms number≤50）, and the double-hybrid DFT methods with empirical dispersion correction are recommended for long-chain and branched hydrocarbons in the same size scope; the DFT methods are ad- vised to apply for large systems （atoms number〉50）, and the M06-2X and B3P86 methods are also favorable. Moreover, the differences of optimized geometry of different methods are discussed and the effects of basis sets for various methods are investigated.展开更多
From the viewpoints of both fuzzy system and fuzzy reasoning, a new fuzzy reasoning method which contains the α- triple I restriction method as its particular case is proposed. The previous α-triple I restriction pr...From the viewpoints of both fuzzy system and fuzzy reasoning, a new fuzzy reasoning method which contains the α- triple I restriction method as its particular case is proposed. The previous α-triple I restriction principles are improved, and then the optimal restriction solutions of this new method are achieved, especially for seven familiar implications. As its special case, the corresponding results of α-triple I restriction method are obtained and improved. Lastly, it is found by examples that this new method is more reasonable than the α-triple I restriction method.展开更多
Aiming to deficiency of the filter and wrapper feature selection methods, anew method based on composite method of filter and wrapper method is proposed. First the methodfilters original features to form a feature sub...Aiming to deficiency of the filter and wrapper feature selection methods, anew method based on composite method of filter and wrapper method is proposed. First the methodfilters original features to form a feature subset which can meet classification correctness rate,then applies wrapper feature selection method select optimal feature subset. A successful techniquefor solving optimization problems is given by genetic algorithm (GA). GA is applied to the problemof optimal feature selection. The composite method saves computing time several times of the wrappermethod with holding the classification accuracy in data simulation and experiment on bearing faultfeature selection. So this method possesses excellent optimization property, can save more selectiontime, and has the characteristics of high accuracy and high efficiency.展开更多
The hollow strontium carbonate pompons was synthesized for the first time by a controlled reaction precipitation method with sodium dodecyl benzene sulfonate(SDBS)and polyvinyl pyrrolidone(PVP)work together as templat...The hollow strontium carbonate pompons was synthesized for the first time by a controlled reaction precipitation method with sodium dodecyl benzene sulfonate(SDBS)and polyvinyl pyrrolidone(PVP)work together as template.The sampled particles were characterized by scanning electron microscopy(SEM),transmission electron microscopy(TEM),nitrogen adsorption-desorption measurement,X-ray diffraction(XRD),Energy dispersive X-Ray spectroscopy(EDX),Fourier transform infrared spectroscopy(FTIR),Thermogravimetric analysis and differential scanning calorimetry(TGA-DSC),etc.It is shown that the assynthesized hollow strontium carbonate pompons with the size of about 2μm consist of flake-like particles under the optimal reaction conditions.The formation mechanism of hollow strontium carbonate pompons was preliminarily explored.展开更多
ZnO/graphene oxide（ZnO/GO） composite material,in which ZnO nanoparticles were densely coated on the GO nanosheets,was successfully prepared by an improved two-step method and characterized by IR, XRD,TEM,and UV-vis ...ZnO/graphene oxide（ZnO/GO） composite material,in which ZnO nanoparticles were densely coated on the GO nanosheets,was successfully prepared by an improved two-step method and characterized by IR, XRD,TEM,and UV-vis techniques.The improved photocatalytic property of the ZnO/GO composite material,evaluated by the photocatalytic degradation of methyl orange（MO） under UV irradiation,is ascribed to the intimate contact between ZnO and GO,the enhanced adsorption of MO,the quick electron transfer from excited ZnO particles to GO sheets and the activation of MO molecules viaπ-πinteraction between MO and GO.展开更多
3D evaluation method of cutting surface topography for C/Ph composites was established.The cutting surface was measured by Talyscan 150,using 3D non-contact measurement.Through the results of 2D and 3D roughness evalu...3D evaluation method of cutting surface topography for C/Ph composites was established.The cutting surface was measured by Talyscan 150,using 3D non-contact measurement.Through the results of 2D and 3D roughness evaluating for C/Ph composite and Duralumin,the 2D evaluation method of the cutting surface topography of C/Ph composite loses a lot of information,the characteristics of the surface topography of C/Ph composite can be comprehensively and authentically evaluated only by 3D evaluation method.Furthermore,3D amplitude and spatial parameters were adopted to evaluate the surface.The results show that： the topography of the C/Ph composite is anisotropic,there are more valleys in the machined surface of C/Ph than that of duralumin,and there are not obvious feeding textures for C/Ph,which indicates the machining mechanism is different from the metal.In conclusion,the topography of the C/Ph composite cutting surface is anisotropic;the cutting surface of C/Ph composite needs 3D evaluation method.展开更多
Repeated Unit Cell（RUC）is a useful tool in micromechanical analysis of composites using Displacement-based Finite Element（DFE）method,and merely applying Periodic Displacement Boundary Conditions（PDBCs）to RUC is ...Repeated Unit Cell（RUC）is a useful tool in micromechanical analysis of composites using Displacement-based Finite Element（DFE）method,and merely applying Periodic Displacement Boundary Conditions（PDBCs）to RUC is almost a standard practice to conduct such analysis.Two basic questions arising from this practice are whether Periodic Traction Boundary Conditions（PTBCs,also known as traction continuity conditions）are guaranteed and whether the solution is independent of selection of RUCs.This paper presents the theoretical aspects to tackle these questions,which unify the strong form,weak form and DFE method of the micromechanical problem together.Specifically,the solution’s independence of selection of RUCs is dealt with on the strong form side,PTBCs are derived from the weak form as natural boundary conditions,and the validity of merely applying PDBCs in micromechanical Finite Element（FE）analysis is proved by referring to its intrinsic connection to the strong form and weak form.Key points in the theoretical aspects are demonstrated by illustrative examples,and the merits of setting micromechanical FE analysis under the background of a clear theoretical framework are highlighted in the efficient selection of RUCs for Uni Directional（UD）fiber-reinforced composites.展开更多
TiO2 films have received increasing attention for the removal of organic pollutants via photocatalysis. To develop a simple and effective method for improving the photodegradation efficiency of pollutants in surface w...TiO2 films have received increasing attention for the removal of organic pollutants via photocatalysis. To develop a simple and effective method for improving the photodegradation efficiency of pollutants in surface water, we herein examined the preparation of a P25-TiO2 composite film on a cement substrate via a sol–gel method. In this case, Rhodamine B（Rh B）was employed as the target organic pollutant. The self-generated TiO2 film and the P25-TiO2 composite film were characterized by X-ray diffraction（XRD）, N2 adsorption/desorption measurements, scanning electron microscopy（SEM）, transmission electron microscopy（TEM）, and diffuse reflectance spectroscopy（DRS）. The photodegradation efficiencies of the two films were studied by Rh B removal in water under UV（ultraviolet） irradiation. Over 4 day exposure, the P25-TiO2 composite film exhibited higher photocatalytic performance than the self-generated TiO2 film. The photodegradation rate indicated that the efficiency of the P25-TiO2 composite film was enhanced by the addition of the rutile phase Degussa P25 powder. As such, cooperation between the anatase TiO2 and rutile P25 nanoparticles was beneficial for separation of the photo-induced electrons and holes. In addition, the influence of P25 doping on the P25-TiO2 composite films was evaluated. We found that up to a certain saturation point, increased doping enhanced the photodegradation ability of the composite film. Thus, we herein demonstrated that the doping of P25 powders is a simple but effective strategy to prepare a P25-TiO2 composite film on a cement substrate, and the resulting film exhibits excellent removal efficiency in the degradation of organic pollutants.展开更多
A new method of fabricating C/C composite materials, namely electric heating CVD method, was used, which electrified the carbon fiber directly by using the conductivity of itself. Acetylene was used as the carbon sour...A new method of fabricating C/C composite materials, namely electric heating CVD method, was used, which electrified the carbon fiber directly by using the conductivity of itself. Acetylene was used as the carbon source with nitrogen as dilution gas, and the pyrolytic carbon started to deposit on the carbon fiber surface when the deposition temperature was reached. The morphology of pyrolytic carbon was characterized by SEM, and the surface properties of carbon fibers before and after CVD were characterized by Raman spectroscopy. The experimental results show that the electric heating method is a novel method to fabricate C/C composite materials, which can form a dense C/C composite material in a short time. The order degree and the average crystallite size of the carbon fiber surface were decreased after the experiment.展开更多
There are two types of methods for image segmentation.One is traditional image processing methods,which are sensitive to details and boundaries,yet fail to recognize semantic information.The other is deep learning met...There are two types of methods for image segmentation.One is traditional image processing methods,which are sensitive to details and boundaries,yet fail to recognize semantic information.The other is deep learning methods,which can locate and identify different objects,but boundary identifications are not accurate enough.Both of them cannot generate entire segmentation information.In order to obtain accurate edge detection and semantic information,an Adaptive Boundary and Semantic Composite Segmentation method(ABSCS)is proposed.This method can precisely semantic segment individual objects in large-size aerial images with limited GPU performances.It includes adaptively dividing and modifying the aerial images with the proposed principles and methods,using the deep learning method to semantic segment and preprocess the small divided pieces,using three traditional methods to segment and preprocess original-size aerial images,adaptively selecting traditional results tomodify the boundaries of individual objects in deep learning results,and combining the results of different objects.Individual object semantic segmentation experiments are conducted by using the AeroScapes dataset,and their results are analyzed qualitatively and quantitatively.The experimental results demonstrate that the proposed method can achieve more promising object boundaries than the original deep learning method.This work also demonstrates the advantages of the proposed method in applications of point cloud semantic segmentation and image inpainting.展开更多
A facile ammonium-dichromate solution immersion method was introduced to synthesize the copperwettable Cr3C2 coating on and inside the carbon-carbon （C/C） preform. The formation mechanism and the microstructures of ...A facile ammonium-dichromate solution immersion method was introduced to synthesize the copperwettable Cr3C2 coating on and inside the carbon-carbon （C/C） preform. The formation mechanism and the microstructures of the Cr3C2 coatings were studied. The contact angle between molten copper and the C/C decreased from 140°to 60°, demonstrating the significant improvement in the wettability. The Cr3C2- coated C/C-Cu composite with only 4.2% porosity and 3.69 gcm^-3 density was manufactured through copper infiltration. As a result, the thermal and electrical conductivity of the modified C/C-Cu increased significantly due to the infiltrated copper. Also the mechanical properties of the composites including both the flexural and compressive strengths were enhanced by over 100%. The modified C/C-Cu composite exhibited lower friction coefficients and wear rates for different load levels than those of the commercial C/Cu composite. These results demonstrate the potential of the modified C/C-Cu material for use in electrical contacts.展开更多
Composite penalty method of a low order anisotropic nonconforming quadrilateral finite element for the Stokes problem is presented. This method with a large penalty parameter can achieve the same accuracy as the stand...Composite penalty method of a low order anisotropic nonconforming quadrilateral finite element for the Stokes problem is presented. This method with a large penalty parameter can achieve the same accuracy as the stand method with a small penalty parameter and the convergence rate of this method is two times as that of the standard method under the condition of the same order penalty parameter. The superconvergence for velocity is established as well. The results of this paper are also valid to the most of the known nonconforming finite element methods.展开更多
The fracture toughness (KIC) values determined by indentation microfracture method (IM ) for SiC whisker reinforced Al2O3 and ZrO2 based composites were calculated with different IM equations and compared with those o...The fracture toughness (KIC) values determined by indentation microfracture method (IM ) for SiC whisker reinforced Al2O3 and ZrO2 based composites were calculated with different IM equations and compared with those obtained by singte edge notched beam (SENB) technique. Experimental results show that the KIC (IM) values calculated with different equations are quite different one from another. For composites without phase transformable components the KIC (IM) and KIC (SENB) values are practically on the same level, but for composites with phase transformable components (partially stabilized zirconia) the KIC (SENB) values are always higher than KIC (IM). This is because that the IM method can not reveal sensitively the toughening effect due to dynamic t-m transformation of ZrO2 as the SENB method does. The accuracy of the IM method depends on the Suitability of the IM equations and was evaluated for the materials used in this investigation. Two new IM equations are suggested with which the KIC (IM ) values can be obtained very close to KIC (SENB) values for composites having phase transformable components.展开更多
In this paper, we construct a composite Milstein method for nonlinear stochastic differential delay equations. Then we analyze the mean square stability for this method and obtain the step size condition under which t...In this paper, we construct a composite Milstein method for nonlinear stochastic differential delay equations. Then we analyze the mean square stability for this method and obtain the step size condition under which the composite Milstein method is mean square stable. Moreover, we get the step size condition under which the composite Milstein method is global mean square stable. A nonlinear test stochastic differential delay equation is given for numerical tests. The results of numerical tests verify the theoretical results proposed.展开更多
In chemical science,the vertical ionization potential(VIP)is a crucial metric for understanding the electronegativity,hardness and softness of chemical material systems as well as the electronic structure and stabilit...In chemical science,the vertical ionization potential(VIP)is a crucial metric for understanding the electronegativity,hardness and softness of chemical material systems as well as the electronic structure and stability of molecules.Ever since the last century,the model chemistry composite methods have witnessed tremendous developments in computing the thermodynamic properties as well as the barrier heights.However,their performance in realm of the vertical electron processes of molecular systems has been rarely explored.In this study,we for the first time benchmarked the model chemistry composite methods(e.g.,CBS-QB3,G4 and W1BD)in comparison with the commonly used Koopmans's theorem(KT),electron propagator theory(e.g.,OVGF,D2,P3 and P3+)and CCSD(T)methods in calculating the VIP for up to 613 molecular systems with available experimental measurements.The large-scale test calculations strongly showed that the CBS-QB3 model chemistry composite technique can be well recommended to calculate VIP from the perspectives of accuracy,economy and applicability.Notably,the VIP values of up to 7 molecules were identified to have the absolute errors of larger than 0.3 e V at all calculation levels,which have strong hints that their VIP experimental values should be re-investigated.展开更多
This study examines the efficacy of Avicennia marina(AM)leaves as an environmentally sustainable biosorbent for the extraction of methylene blue(MB)dye from wastewater.A hybrid approach of Response Surface Methodology...This study examines the efficacy of Avicennia marina(AM)leaves as an environmentally sustainable biosorbent for the extraction of methylene blue(MB)dye from wastewater.A hybrid approach of Response Surface Methodology(RSM)and Artificial Neural Networks(ANN)was implemented to assess,optimize,and forecast biosorption effectiveness across different operating parameters.The experimental design employed a Central Composite Design(CCD)methodology,focusing on critical parameters including pH,initial dye concentration,temperature,and biosorbent dosage.The ideal biosorption parameters were identified as a temperature of 44.3℃,pH 7.1,a biosorbent dosage of 0.3 grams,and an initial dye concentration of 48.4 mg/L,resulting in a maximum removal efficiency of 84.26%.The ANN model exhibited significant prediction accuracy,so confirming its appropriateness for predicting and enhancing intricate biosorption processes.The findings underscore that AM leaves constitute a cost-efficient,plentiful,and ecologically sustainable resource for wastewater treatment purposes.Furthermore,the amalgamation of RSM and ANN shown significant efficacy in process optimization and forecasting.These findings provide significant insights into the advancement of eco-friendly solutions for the treatment of dye-contaminated water.Subsequent study must prioritize the amplification of the procedure for industrial applications,the execution of ongoing system assessments,and the evaluation of the enduring environmental and economic ramifications of utilizing AM leaves as a biosorbent.展开更多
A flux-form semi-Lagrangian transport scheme （FFSL） was implemented in a spectral atmospheric GCM developed and used at IAP/LASG. Idealized numerical experiments show that the scheme is good at shape preserving with...A flux-form semi-Lagrangian transport scheme （FFSL） was implemented in a spectral atmospheric GCM developed and used at IAP/LASG. Idealized numerical experiments show that the scheme is good at shape preserving with less dissipation and dispersion, in comparison with other conventional schemes, hnportantly, FFSL can automatically maintain the positive definition of the transported tracers, which was an underlying problem in the previous spectral composite method （SCM）. To comprehensively investigate the impact of FFSL on GCM results, we conducted sensitive experiments. Three main improvements resulted： first, rainfall simulation in both distribution and intensity was notably improved, which led to an improvement in precipitation frequency. Second, the dry bias in the lower troposphere was significantly reduced compared with SCM simulations. Third, according to the Taylor diagram, the FFSL scheme yields simulations that are superior to those using the SCM： a higher correlation between model output and observation data was achieved with the FFSL scheme, especially for humidity in lower troposphere. However, the moist bias in the middle and upper troposphere was more pronounced with the FFSL scheme. This bias led to an over-simulation of precipitable water in comparison with reanalysis data. Possible explanations, as well as solutions, are discussed herein.展开更多
文摘In this paper, the modification of double Laplace decomposition method is pro- posed for the analytical approximation solution of a coupled system of pseudo-parabolic equation with initial conditions. Some examples are given to support our presented method. In addition, we prove the convergence of double Laplace transform decomposition method applied to our problems.
文摘The multi-frequency and multi-dimensional adapted Runge-Kutta^NystrSm （ARKN） integrators, and multi-frequency and multi-dimensional extended Runge-Kutta-NystrSm （ERKN） integrators have been developed to efficiently solve multi-frequency oscillatory Hamiltonian systems. The aim of this paper is to analyze and derive high-order sym- plectic and symmetric composition methods based on the ARKN integrators and ERKN integrators. We first consider the symplecticity conditions for the multi-frequency and multi-dimensional ARKN integrators. We then analyze the symplecticity of the adjoint in- tegrators of the multi-frequency and multi^dimensional symplectic ARKN integrators and ERKN integrators, respectively. On the basis of the theoretical analysis and by using the idea of composition methods, we derive and propose four new high-order symplectic and symmetric methods for the multi-frequency oscillatory Hamiltonian systems. The numer- ical results accompanied in this paper quantitatively show the advantage and efficiency of the proposed high-order symplectic and symmetric methods.
文摘We propose an efficient numerical method for two population models, based on the nonstandard finite difference （NSFD） schemes and composition methods with complex time steps. The NSFD scheme is able to give positive numerical solutions that satisfy the conservation law, which is a key property for biological population models. The accuracy is improved by using the composition methods with complex time steps. Numerical tests on the plankton nutrient model and whooping cough model are presented to show the efficiency and advantage of the proposed numerical method.
文摘The density functional theory （DFT） is the most popular method for evaluating bond dis- sociation enthalpies （BDEs） of most molecules. Thus, we are committed to looking for alternative methods that can balance the computational cost and higher precision to the best for large systems. The performance of DFT, double-hybrid DFT, and high-level com- posite methods are examined. The tested sets contain monocyclic and polycyclic aromatic molecules, branched hydrocarbons, small inorganic molecules, etc. The results show that the mPW2PLYP and G4MP2 methods achieve reasonable agreement with the benchmark val- ues for most tested molecules, and the mean absolute deviations are 2.43 and 1.96 kcal/mol after excluding the BDEs of branched hydrocarbons. We recommend the G4MP2 is the most appropriate method for small systems （atoms number≤20）; the double-hybrid DFT methods are advised for large aromatic molecules in medium size （20≤atoms number≤50）, and the double-hybrid DFT methods with empirical dispersion correction are recommended for long-chain and branched hydrocarbons in the same size scope; the DFT methods are ad- vised to apply for large systems （atoms number〉50）, and the M06-2X and B3P86 methods are also favorable. Moreover, the differences of optimized geometry of different methods are discussed and the effects of basis sets for various methods are investigated.
基金supported by the National Natural Science Foundation of China (61105076 61070124)+2 种基金the National High Technology Research and Development Program of China (863 Program) (2012AA011103)the Open Project of State Key Laboratory of Virtual Reality Technology and Systems of China (BUAA-VR-10KF-5)the Fundamental Research Funds for the Central Universities (2011HGZY0004)
文摘From the viewpoints of both fuzzy system and fuzzy reasoning, a new fuzzy reasoning method which contains the α- triple I restriction method as its particular case is proposed. The previous α-triple I restriction principles are improved, and then the optimal restriction solutions of this new method are achieved, especially for seven familiar implications. As its special case, the corresponding results of α-triple I restriction method are obtained and improved. Lastly, it is found by examples that this new method is more reasonable than the α-triple I restriction method.
基金This project is supported by Scientific Research Foundation of National Defence of China (No.41319040202).
文摘Aiming to deficiency of the filter and wrapper feature selection methods, anew method based on composite method of filter and wrapper method is proposed. First the methodfilters original features to form a feature subset which can meet classification correctness rate,then applies wrapper feature selection method select optimal feature subset. A successful techniquefor solving optimization problems is given by genetic algorithm (GA). GA is applied to the problemof optimal feature selection. The composite method saves computing time several times of the wrappermethod with holding the classification accuracy in data simulation and experiment on bearing faultfeature selection. So this method possesses excellent optimization property, can save more selectiontime, and has the characteristics of high accuracy and high efficiency.
基金Funded by the National Natural Science Foundation of China(No.22002143)the Natural Science Foundation of Shanxi Province of China(No.201901D211223)the Postgraduate Students Scientific Research Project of North University of China(No.20201766)。
文摘The hollow strontium carbonate pompons was synthesized for the first time by a controlled reaction precipitation method with sodium dodecyl benzene sulfonate(SDBS)and polyvinyl pyrrolidone(PVP)work together as template.The sampled particles were characterized by scanning electron microscopy(SEM),transmission electron microscopy(TEM),nitrogen adsorption-desorption measurement,X-ray diffraction(XRD),Energy dispersive X-Ray spectroscopy(EDX),Fourier transform infrared spectroscopy(FTIR),Thermogravimetric analysis and differential scanning calorimetry(TGA-DSC),etc.It is shown that the assynthesized hollow strontium carbonate pompons with the size of about 2μm consist of flake-like particles under the optimal reaction conditions.The formation mechanism of hollow strontium carbonate pompons was preliminarily explored.
基金supported by the Natural Science Foundation of China(No.21174114)the Ministry of Education Plan for Yangtze River Scholar and Innovation Team Development(No.IRT1177)+2 种基金Scientific and Technical Plan Project of Gansu Province(No. 1204GKCA006)the Natural Science Foundation of Gansu Province (No.1010RJZA024)Scientific and Technical Innovation Project of Northwest Normal University(No.nwnu-kjcxgc-03-63)
文摘ZnO/graphene oxide（ZnO/GO） composite material,in which ZnO nanoparticles were densely coated on the GO nanosheets,was successfully prepared by an improved two-step method and characterized by IR, XRD,TEM,and UV-vis techniques.The improved photocatalytic property of the ZnO/GO composite material,evaluated by the photocatalytic degradation of methyl orange（MO） under UV irradiation,is ascribed to the intimate contact between ZnO and GO,the enhanced adsorption of MO,the quick electron transfer from excited ZnO particles to GO sheets and the activation of MO molecules viaπ-πinteraction between MO and GO.
基金Funded by the National Natural Science Foundation of China(No.50875036)
文摘3D evaluation method of cutting surface topography for C/Ph composites was established.The cutting surface was measured by Talyscan 150,using 3D non-contact measurement.Through the results of 2D and 3D roughness evaluating for C/Ph composite and Duralumin,the 2D evaluation method of the cutting surface topography of C/Ph composite loses a lot of information,the characteristics of the surface topography of C/Ph composite can be comprehensively and authentically evaluated only by 3D evaluation method.Furthermore,3D amplitude and spatial parameters were adopted to evaluate the surface.The results show that： the topography of the C/Ph composite is anisotropic,there are more valleys in the machined surface of C/Ph than that of duralumin,and there are not obvious feeding textures for C/Ph,which indicates the machining mechanism is different from the metal.In conclusion,the topography of the C/Ph composite cutting surface is anisotropic;the cutting surface of C/Ph composite needs 3D evaluation method.
文摘Repeated Unit Cell（RUC）is a useful tool in micromechanical analysis of composites using Displacement-based Finite Element（DFE）method,and merely applying Periodic Displacement Boundary Conditions（PDBCs）to RUC is almost a standard practice to conduct such analysis.Two basic questions arising from this practice are whether Periodic Traction Boundary Conditions（PTBCs,also known as traction continuity conditions）are guaranteed and whether the solution is independent of selection of RUCs.This paper presents the theoretical aspects to tackle these questions,which unify the strong form,weak form and DFE method of the micromechanical problem together.Specifically,the solution’s independence of selection of RUCs is dealt with on the strong form side,PTBCs are derived from the weak form as natural boundary conditions,and the validity of merely applying PDBCs in micromechanical Finite Element（FE）analysis is proved by referring to its intrinsic connection to the strong form and weak form.Key points in the theoretical aspects are demonstrated by illustrative examples,and the merits of setting micromechanical FE analysis under the background of a clear theoretical framework are highlighted in the efficient selection of RUCs for Uni Directional（UD）fiber-reinforced composites.
基金supported by the National Science Funds for Creative Research Groups of China (No. 51421006)the National Major Projects of Water Pollution Control and Management Technology (No. 2017ZX07204003)+2 种基金the National Key Plan for Research and Development of China (2016YFC0502203)the Key Program of National Natural Science Foundation of China (No. 91647206)the Qing Lan Project of Jiangsu Province, and PAPD
文摘TiO2 films have received increasing attention for the removal of organic pollutants via photocatalysis. To develop a simple and effective method for improving the photodegradation efficiency of pollutants in surface water, we herein examined the preparation of a P25-TiO2 composite film on a cement substrate via a sol–gel method. In this case, Rhodamine B（Rh B）was employed as the target organic pollutant. The self-generated TiO2 film and the P25-TiO2 composite film were characterized by X-ray diffraction（XRD）, N2 adsorption/desorption measurements, scanning electron microscopy（SEM）, transmission electron microscopy（TEM）, and diffuse reflectance spectroscopy（DRS）. The photodegradation efficiencies of the two films were studied by Rh B removal in water under UV（ultraviolet） irradiation. Over 4 day exposure, the P25-TiO2 composite film exhibited higher photocatalytic performance than the self-generated TiO2 film. The photodegradation rate indicated that the efficiency of the P25-TiO2 composite film was enhanced by the addition of the rutile phase Degussa P25 powder. As such, cooperation between the anatase TiO2 and rutile P25 nanoparticles was beneficial for separation of the photo-induced electrons and holes. In addition, the influence of P25 doping on the P25-TiO2 composite films was evaluated. We found that up to a certain saturation point, increased doping enhanced the photodegradation ability of the composite film. Thus, we herein demonstrated that the doping of P25 powders is a simple but effective strategy to prepare a P25-TiO2 composite film on a cement substrate, and the resulting film exhibits excellent removal efficiency in the degradation of organic pollutants.
基金Funded by the National Natural Science Foundation of China(51165006)
文摘A new method of fabricating C/C composite materials, namely electric heating CVD method, was used, which electrified the carbon fiber directly by using the conductivity of itself. Acetylene was used as the carbon source with nitrogen as dilution gas, and the pyrolytic carbon started to deposit on the carbon fiber surface when the deposition temperature was reached. The morphology of pyrolytic carbon was characterized by SEM, and the surface properties of carbon fibers before and after CVD were characterized by Raman spectroscopy. The experimental results show that the electric heating method is a novel method to fabricate C/C composite materials, which can form a dense C/C composite material in a short time. The order degree and the average crystallite size of the carbon fiber surface were decreased after the experiment.
基金funded in part by the Equipment Pre-Research Foundation of China,Grant No.61400010203in part by the Independent Project of the State Key Laboratory of Virtual Reality Technology and Systems.
文摘There are two types of methods for image segmentation.One is traditional image processing methods,which are sensitive to details and boundaries,yet fail to recognize semantic information.The other is deep learning methods,which can locate and identify different objects,but boundary identifications are not accurate enough.Both of them cannot generate entire segmentation information.In order to obtain accurate edge detection and semantic information,an Adaptive Boundary and Semantic Composite Segmentation method(ABSCS)is proposed.This method can precisely semantic segment individual objects in large-size aerial images with limited GPU performances.It includes adaptively dividing and modifying the aerial images with the proposed principles and methods,using the deep learning method to semantic segment and preprocess the small divided pieces,using three traditional methods to segment and preprocess original-size aerial images,adaptively selecting traditional results tomodify the boundaries of individual objects in deep learning results,and combining the results of different objects.Individual object semantic segmentation experiments are conducted by using the AeroScapes dataset,and their results are analyzed qualitatively and quantitatively.The experimental results demonstrate that the proposed method can achieve more promising object boundaries than the original deep learning method.This work also demonstrates the advantages of the proposed method in applications of point cloud semantic segmentation and image inpainting.
基金the financial support from of the National Basic Research Program of China (Nos. 2012CB619600 and 2011CB012803)
文摘A facile ammonium-dichromate solution immersion method was introduced to synthesize the copperwettable Cr3C2 coating on and inside the carbon-carbon （C/C） preform. The formation mechanism and the microstructures of the Cr3C2 coatings were studied. The contact angle between molten copper and the C/C decreased from 140°to 60°, demonstrating the significant improvement in the wettability. The Cr3C2- coated C/C-Cu composite with only 4.2% porosity and 3.69 gcm^-3 density was manufactured through copper infiltration. As a result, the thermal and electrical conductivity of the modified C/C-Cu increased significantly due to the infiltrated copper. Also the mechanical properties of the composites including both the flexural and compressive strengths were enhanced by over 100%. The modified C/C-Cu composite exhibited lower friction coefficients and wear rates for different load levels than those of the commercial C/Cu composite. These results demonstrate the potential of the modified C/C-Cu material for use in electrical contacts.
基金Supported by the National Natural Science Foundation of China (10791203, 11271340)the Natural Science Foundation of Henan Province (112300410109)
文摘Composite penalty method of a low order anisotropic nonconforming quadrilateral finite element for the Stokes problem is presented. This method with a large penalty parameter can achieve the same accuracy as the stand method with a small penalty parameter and the convergence rate of this method is two times as that of the standard method under the condition of the same order penalty parameter. The superconvergence for velocity is established as well. The results of this paper are also valid to the most of the known nonconforming finite element methods.
文摘The fracture toughness (KIC) values determined by indentation microfracture method (IM ) for SiC whisker reinforced Al2O3 and ZrO2 based composites were calculated with different IM equations and compared with those obtained by singte edge notched beam (SENB) technique. Experimental results show that the KIC (IM) values calculated with different equations are quite different one from another. For composites without phase transformable components the KIC (IM) and KIC (SENB) values are practically on the same level, but for composites with phase transformable components (partially stabilized zirconia) the KIC (SENB) values are always higher than KIC (IM). This is because that the IM method can not reveal sensitively the toughening effect due to dynamic t-m transformation of ZrO2 as the SENB method does. The accuracy of the IM method depends on the Suitability of the IM equations and was evaluated for the materials used in this investigation. Two new IM equations are suggested with which the KIC (IM ) values can be obtained very close to KIC (SENB) values for composites having phase transformable components.
基金Supported by National Natural Science Foundation of China(No.61272024)Anhui Provincial Natural Science Foundation(No.11040606M06)
文摘In this paper, we construct a composite Milstein method for nonlinear stochastic differential delay equations. Then we analyze the mean square stability for this method and obtain the step size condition under which the composite Milstein method is mean square stable. Moreover, we get the step size condition under which the composite Milstein method is global mean square stable. A nonlinear test stochastic differential delay equation is given for numerical tests. The results of numerical tests verify the theoretical results proposed.
基金funded by the National Natural Science Foundation of China(Nos.22073069,21773082)Science Research Project of Hebei Education Department(No.QN2024255)。
文摘In chemical science,the vertical ionization potential(VIP)is a crucial metric for understanding the electronegativity,hardness and softness of chemical material systems as well as the electronic structure and stability of molecules.Ever since the last century,the model chemistry composite methods have witnessed tremendous developments in computing the thermodynamic properties as well as the barrier heights.However,their performance in realm of the vertical electron processes of molecular systems has been rarely explored.In this study,we for the first time benchmarked the model chemistry composite methods(e.g.,CBS-QB3,G4 and W1BD)in comparison with the commonly used Koopmans's theorem(KT),electron propagator theory(e.g.,OVGF,D2,P3 and P3+)and CCSD(T)methods in calculating the VIP for up to 613 molecular systems with available experimental measurements.The large-scale test calculations strongly showed that the CBS-QB3 model chemistry composite technique can be well recommended to calculate VIP from the perspectives of accuracy,economy and applicability.Notably,the VIP values of up to 7 molecules were identified to have the absolute errors of larger than 0.3 e V at all calculation levels,which have strong hints that their VIP experimental values should be re-investigated.
文摘This study examines the efficacy of Avicennia marina(AM)leaves as an environmentally sustainable biosorbent for the extraction of methylene blue(MB)dye from wastewater.A hybrid approach of Response Surface Methodology(RSM)and Artificial Neural Networks(ANN)was implemented to assess,optimize,and forecast biosorption effectiveness across different operating parameters.The experimental design employed a Central Composite Design(CCD)methodology,focusing on critical parameters including pH,initial dye concentration,temperature,and biosorbent dosage.The ideal biosorption parameters were identified as a temperature of 44.3℃,pH 7.1,a biosorbent dosage of 0.3 grams,and an initial dye concentration of 48.4 mg/L,resulting in a maximum removal efficiency of 84.26%.The ANN model exhibited significant prediction accuracy,so confirming its appropriateness for predicting and enhancing intricate biosorption processes.The findings underscore that AM leaves constitute a cost-efficient,plentiful,and ecologically sustainable resource for wastewater treatment purposes.Furthermore,the amalgamation of RSM and ANN shown significant efficacy in process optimization and forecasting.These findings provide significant insights into the advancement of eco-friendly solutions for the treatment of dye-contaminated water.Subsequent study must prioritize the amplification of the procedure for industrial applications,the execution of ongoing system assessments,and the evaluation of the enduring environmental and economic ramifications of utilizing AM leaves as a biosorbent.
基金supported by the Chinese Academy of Science Strategic Priority Research Program (Grant No. XDA05110303)"973" Program (Grant Nos. 2010CB950403,2012CB417203,and 2013CB955803)+1 种基金"863" Program(Grant No. 2010AA012305)the National Natural Science Foundation of China (Grant Nos. 40925015,40875034,and 41023002)
文摘A flux-form semi-Lagrangian transport scheme （FFSL） was implemented in a spectral atmospheric GCM developed and used at IAP/LASG. Idealized numerical experiments show that the scheme is good at shape preserving with less dissipation and dispersion, in comparison with other conventional schemes, hnportantly, FFSL can automatically maintain the positive definition of the transported tracers, which was an underlying problem in the previous spectral composite method （SCM）. To comprehensively investigate the impact of FFSL on GCM results, we conducted sensitive experiments. Three main improvements resulted： first, rainfall simulation in both distribution and intensity was notably improved, which led to an improvement in precipitation frequency. Second, the dry bias in the lower troposphere was significantly reduced compared with SCM simulations. Third, according to the Taylor diagram, the FFSL scheme yields simulations that are superior to those using the SCM： a higher correlation between model output and observation data was achieved with the FFSL scheme, especially for humidity in lower troposphere. However, the moist bias in the middle and upper troposphere was more pronounced with the FFSL scheme. This bias led to an over-simulation of precipitable water in comparison with reanalysis data. Possible explanations, as well as solutions, are discussed herein.
