TiCx/Cu composites were fabricated by combustion synthesis and hot press technology. Using XRD, SEM, EDS, FESEM analysis methods, the effects of various carbon sources and different Cu contents on the microstructures ...TiCx/Cu composites were fabricated by combustion synthesis and hot press technology. Using XRD, SEM, EDS, FESEM analysis methods, the effects of various carbon sources and different Cu contents on the microstructures of TiCx/Cu composites and the size of TiCx particles were investigated. Results showed that TiCx reinforcing particles size increases with decreasing Cu content in Cu-Ti-C reaction system. With carbon nanotubes（carbon black） serving as carbon source, the generated TiCx particles size transits from nanometer to submicron when Cu content corresponding to the reaction system is reduced to 60 vol%（70 vol%）; while graphite serves as carbon source, there is no clear limiting concentration. C particles with smaller size, larger specific surface area and better distribution result in finer TiCx particles, which is more beneficial to generating nano-sized TiCx/Cu composites.展开更多
InAs1-xSbx with different compositions is grown by molecular beam epitaxy on （100）-oriented semi-insulating GaAs substrates. The increase of Sb content in the epilayer results in the deterioration of crystal quality...InAs1-xSbx with different compositions is grown by molecular beam epitaxy on （100）-oriented semi-insulating GaAs substrates. The increase of Sb content in the epilayer results in the deterioration of crystal quality and surface morphology. Hall measurements show that the carrier concentration increases with the composition of Sb. The electron mobility decreases initially, when Sb composition exceeds a certain value, and the mobility increases slightly. In this work, we emphasize the comparison of crystal quality, surface morphology and electrical properties of epilayers with different Sb compositions.展开更多
The densification and the fractal dimensions of carbon-nickel films annealed at different temperatures 300, 500, 800, and 1000℃ with emphasis on porosity evaluation are investigated. For this purpose, the refractive...The densification and the fractal dimensions of carbon-nickel films annealed at different temperatures 300, 500, 800, and 1000℃ with emphasis on porosity evaluation are investigated. For this purpose, the refractive index of films is determined from transmittance spectra. Three different regimes are identified, T 〈 500℃, 500℃ 〈 T 〈 800℃ and T 〉 800℃. The Rutherford baekscattering spectra show that with increasing the annealing temperature, the concentration of nickel atoms into films decreases. It is shown that the effect of annealing temperatures for increasing films densification at T 〈 500℃ and T 〉 800℃ is greater than the effect of nickel concentrations. It is observed that the effect of decreasing nickel atoms into films at 500℃ 〈 T 〈 800℃ strongly causes improving porosity and decreasing densification. The fractal dimensions of carbon-nickel films annealed from 300 to 500℃ are increased, while from 500 to 1000℃ these characteristics are decreased. It can be seen that at 800℃, films have maximum values of porosity and roughness.展开更多
文摘TiCx/Cu composites were fabricated by combustion synthesis and hot press technology. Using XRD, SEM, EDS, FESEM analysis methods, the effects of various carbon sources and different Cu contents on the microstructures of TiCx/Cu composites and the size of TiCx particles were investigated. Results showed that TiCx reinforcing particles size increases with decreasing Cu content in Cu-Ti-C reaction system. With carbon nanotubes（carbon black） serving as carbon source, the generated TiCx particles size transits from nanometer to submicron when Cu content corresponding to the reaction system is reduced to 60 vol%（70 vol%）; while graphite serves as carbon source, there is no clear limiting concentration. C particles with smaller size, larger specific surface area and better distribution result in finer TiCx particles, which is more beneficial to generating nano-sized TiCx/Cu composites.
基金Supported by the Aeronautical Science Foundation of China under Grant No 20132435the National High-Technology Research and Development Program of China under Grant No 2013AA031903+1 种基金the National Natural Science Foundation of China under Grant Nos 61106013 and 61275107the China Postdoctoral Science Foundation under Grant No 2014M560936
文摘InAs1-xSbx with different compositions is grown by molecular beam epitaxy on （100）-oriented semi-insulating GaAs substrates. The increase of Sb content in the epilayer results in the deterioration of crystal quality and surface morphology. Hall measurements show that the carrier concentration increases with the composition of Sb. The electron mobility decreases initially, when Sb composition exceeds a certain value, and the mobility increases slightly. In this work, we emphasize the comparison of crystal quality, surface morphology and electrical properties of epilayers with different Sb compositions.
文摘The densification and the fractal dimensions of carbon-nickel films annealed at different temperatures 300, 500, 800, and 1000℃ with emphasis on porosity evaluation are investigated. For this purpose, the refractive index of films is determined from transmittance spectra. Three different regimes are identified, T 〈 500℃, 500℃ 〈 T 〈 800℃ and T 〉 800℃. The Rutherford baekscattering spectra show that with increasing the annealing temperature, the concentration of nickel atoms into films decreases. It is shown that the effect of annealing temperatures for increasing films densification at T 〈 500℃ and T 〉 800℃ is greater than the effect of nickel concentrations. It is observed that the effect of decreasing nickel atoms into films at 500℃ 〈 T 〈 800℃ strongly causes improving porosity and decreasing densification. The fractal dimensions of carbon-nickel films annealed from 300 to 500℃ are increased, while from 500 to 1000℃ these characteristics are decreased. It can be seen that at 800℃, films have maximum values of porosity and roughness.
