1.Introduction The strength-ductility trade-offdilemma has long been a per-sistent challenge in Al matrix composites(AMCs)[1,2].This is-sue primarily arises from the agglomeration of reinforcements at the grain bounda...1.Introduction The strength-ductility trade-offdilemma has long been a per-sistent challenge in Al matrix composites(AMCs)[1,2].This is-sue primarily arises from the agglomeration of reinforcements at the grain boundaries(GBs),which restricts local plastic flow dur-ing the plastic deformation and leads to stress concentration[3,4].Recently,the development of concepts aimed at achieving hetero-geneous grain has emerged as a promising approach for enhanc-ing comprehensive mechanical properties[5,6].展开更多
It has always been challenging work to reconcile the contradiction between the strength and plasticity of titanium materials.Laser powder bed fusion(LPBF) is a convenient method to fabricate innovative composites incl...It has always been challenging work to reconcile the contradiction between the strength and plasticity of titanium materials.Laser powder bed fusion(LPBF) is a convenient method to fabricate innovative composites including those inspired by gradient layered materials.In this work,we used LPBF to selectively prepare Ti N/Ti gradient layered structure(GLSTi)composites by using different N_(2)–Ar ratios during the LPBF process.We systematically investigated the mechanisms of in-situ synthesis Ti N,high strength and ductility of GLSTi composites using microscopic analysis,TEM characterization,and tensile testing with digital image correlation.Besides,a digital correspondence was established between the N_(2) concentration and the volume fraction of LPBF in-situ synthesized Ti N.Our results show that the GLSTi composites exhibit superior mechanical properties compared to pure titanium fabricated by LPBF under pure Ar.Specifically,the tensile strength of GLSTi was more than 1.5times higher than that of LPBF-formed pure titanium,reaching up to 1100 MPa,while maintaining a high elongation at fracture of 17%.GLSTi breaks the bottleneck of high strength but low ductility exhibited by conventional nanoceramic particle-strengthened titanium matrix composites,and the hetero-deformation induced strengthening effect formed by the Ti N/Ti layered structure explained its strength-plasticity balanced principle.The microhardness exhibits a jagged variation of the relatively low hardness of 245 HV0.2 for the pure titanium layer and a high hardness of 408 HV0.2 for the N_(2) in-situ synthesis layer.Our study provides a new concept for the structure-performance digital customization of 3D-printed Ti-based composites.展开更多
Developing high-performance electromagnetic absorbing materials remains a challenge.In this work,Gd-Co ferrite@carbon core-shell structure composites were synthesized by a two-step hydrothermal method.The effects of r...Developing high-performance electromagnetic absorbing materials remains a challenge.In this work,Gd-Co ferrite@carbon core-shell structure composites were synthesized by a two-step hydrothermal method.The effects of rare earth Gd doping amount on the microstructure and electromagnetic wave absorption properties of cobalt ferrite@carbon composites were mainly studied.The results show that an appropriate amount of Gd doping can refine the crystal grain size of cobalt ferrite@carbon composites.However,when the doping amount of Gd exceeds the solid solubility threshold,the secondary phase GdFeO_(3)will be generated and the grain size will increase.When the doping amount of Gd is x=0.04,the reflection loss(RL) of the CoFe_(1.96)Gd_(0.04)O_(4)@C composites reaches the minimum value of -9.26 dB at the absorption layer thickness of 2.0 mm and a frequency of 13.67 GHz,and the effective absorption band(EAB) is 5.01 GHz(10.95-15.96 GHz).Compared with the CoFe_(2)O_(4)@C composites,the RL of the CoFe_(1.96)Gd_(0.04)O_(4)@C composites is increased by 79.35%,and the EAB is broadened by 3.51%.Gd ions enhance the dielectric loss through the grain size effect,and the increase of magnetocrystalline anisotropy enhances the magnetic loss.The CoFe_(1.96)Gd_(0.04)O_(4)@C composites have excellent impedance matching,which relies on the strong magnetic loss of ferrite,the interface polarization,and dipole polarization formed by the carbon shell to attenuate electromagnetic waves.展开更多
A novel chemical technique combined with unique plasma activated sintering（PAS） was utilized to prepare consolidated copper matrix composites（CMCs） by adding Cu-SnO2-rGO layered micro powders as reinforced fillers...A novel chemical technique combined with unique plasma activated sintering（PAS） was utilized to prepare consolidated copper matrix composites（CMCs） by adding Cu-SnO2-rGO layered micro powders as reinforced fillers into Cu matrix. The repeating Cu-SnO2-rGO structure was composed of inner dispersed reduced graphene oxide（r GO）, SnO2 as intermedia and outer Cu coating. SnO2 was introduced to the surface of rGO sheets in order to prevent the graphene aggregation with SnO2 serving as spacer and to provide enough active sites for subsequent Cu deposition. This process can guarantee rGO sheets to suffi ciently disperse and Cu nanoparticles to tightly and uniformly anchor on each layer of rGO by means of the SnO2 active sites as well as strictly control the reduction speed of Cu^2＋. The complete cover of Cu nanoparticles on rGO sheets thoroughly avoids direct contact among rGO layers. Hence, the repeating structure can simultaneously solve the wettability problem between rGO and Cu matrix as well as improve the bonding strength between rGO and Cu matrix at the well-bonded Cu-SnO2-rGO interface. The isolated rGO can effectively hinder the glide of dislocation at Cu-rGO interface and support the applied loads. Finally, the compressive strength of CMCs was enhanced when the strengthening effi ciency reached up to 41.展开更多
Structures and properties of the blends of thermotropic liquid crystallinepolymer(LC70)and poly(ethylene terephthalate) (PET) were investigated by usingWAXD,DSC,SEM and mechanical test.The results revealed that Wc,x m...Structures and properties of the blends of thermotropic liquid crystallinepolymer(LC70)and poly(ethylene terephthalate) (PET) were investigated by usingWAXD,DSC,SEM and mechanical test.The results revealed that Wc,x markdly decreased withLC70/PET>30%,and at about LC70/PET=10%, this blend can yield better mechanicalproperties.In these blends LC70 can play the role of the nuclear agent for PET.SEMphoto showed that LC70/PET in in-situ composites possessed 'core-shell' structure andwas immiscible, but at LC70/PST=10%, the LC70 can be uniformly dispersed into matrix PET.展开更多
As the proportion of composite materials used in aircraft continues to increase, the electromagnetic Shielding Effectiveness (SE) of these materials becomes a critical factor in the electromagnetic safety design of ai...As the proportion of composite materials used in aircraft continues to increase, the electromagnetic Shielding Effectiveness (SE) of these materials becomes a critical factor in the electromagnetic safety design of aircraft structures. The assessment of electromagnetic SE for Slotted Composite Structures(SCSs) is particularly challenging due to their complex geometries and there remains a lack of suitable models for accurately predicting the SE performance of these intricate configurations. To address this issue, this paper introduces SCS-Net, a Deep Neural Network (DNN) method designed to accurately predict the SE of SCS. This method considers the impacts of various structural parameters, material properties and incident wave parameters on the SE of SCSs. In order to better model the SCS, an improved Nicolson-Ross-Weir (NRW) method is introduced in this paper to provide an equivalent flat structure for the SCS and to calculate the electromagnetic parameters of the equivalent structure. Additionally, the prediction of SE via DNNs is limited by insufficient test data, which hinders support for large-sample training. To address the issue of limited measured data, this paper develops a Measurement-Computation Fusion (MCF) dataset construction method. The predictions based on the simulation results show that the proposed method maintains an error of less than 0.07 dB within the 8–10 GHz frequency range. Furthermore, a new loss function based on the weighted L1-norm is established to improve the prediction accuracy for these parameters. Compared with traditional loss functions, the new loss function reduces the maximum prediction error for equivalent electromagnetic parameters by 47%. This method significantly improves the prediction accuracy of SCS-Net for measured data, with a maximum improvement of 23.88%. These findings demonstrate that the proposed method enables precise SE prediction and design for composite structures while reducing the number of test samples needed.展开更多
The damage distribution of the same type of aircraft in similar service environments should be similar. Based on this assumption, to perform the maintenance and repair of aircraft composite structures, the damage of c...The damage distribution of the same type of aircraft in similar service environments should be similar. Based on this assumption, to perform the maintenance and repair of aircraft composite structures, the damage of composite structures in a certain type of aircraft were investigated. The time-varying damage distribution model was established and verified based on the damage of a 16-aircraft fleet. The results show that the quantitative proportions of structural damage are 74% for skin delamination, 22% for stringer delamination and 3% for stringer-skin interface debonding. The amount of structural damages increases linearly with service time while the proportion of different damages does not change. As the service time increases, the geometric parameter distribution of damage for the same type of aircraft gradually converges, which can be approximated using the same function. There are certain differences in the proportion and geometric parameter distribution of damages among different components and locations, and the differences do not change over time.展开更多
Flow boiling in open microchannels offers highly efficient heat transfer performance and has attracted increasing attention in the fields of heat transfer and thermalmanagement of electronic devices in recent years.Ho...Flow boiling in open microchannels offers highly efficient heat transfer performance and has attracted increasing attention in the fields of heat transfer and thermalmanagement of electronic devices in recent years.However,the continuous rise in power density of electronic components imposesmore stringent requirements on the heat transfer capability of microchannel flow boiling.HFE-7100,a dielectric coolant with favorable thermophysical properties,has become a focal point of research for enhancing flow boiling performance in open microchannels.The flow boiling heat transfer performance ofHFE-7100 was investigated in this study by fabricating micro-nano composite structures on the bottom surface of open microchannels using laser ablation technology.Based on visualization results,a comparative analysis was conducted on the bubble dynamics and flow pattern characteristics of HFE-7100 flow boiling in micronano structured open microchannels(MNSOMC)and smooth-surface open microchannels(SSOMC),to elucidate the enhancement mechanism of micro-nano structures on flow boiling heat transfer in open microchannels.The results indicate that the surface structures and strong wettability of MNSOMC accelerated bubble nucleation and departure.Moreover,bubbles in the channel tended to coalesce along the flow direction,forming elongated slug bubbles with high aspect ratios,which enabled efficient thin film evaporation in conjunction with intense nucleate boiling,thereby significantly enhancing flow boiling heat transfer.Under the experimental conditions of this study,the maximum enhancements in the heat transfer coefficient(HTC)and critical heat flux(CHF)of HFE-7100 inMNSOMC were 33.4%and 133.1%,respectively,with the CHF reaching up to 1542.3 kW⋅m^(−2).Furthermore,due to the superior wettability and capillary wicking capability of the micro-nano composite structures,the significant enhancement in flow boiling heat transfer was achieved without incurring a noticeable pressure drop penalty.展开更多
Interlayer friction stir processing(FSP)has been proved to be an efective method of enhancing the mechanical properties of wire arc-directed energy deposited(WA-DED)samples.However,the original deposition structure wa...Interlayer friction stir processing(FSP)has been proved to be an efective method of enhancing the mechanical properties of wire arc-directed energy deposited(WA-DED)samples.However,the original deposition structure was still retained in the FSP-WA-DED component besides the processed zone(PZ),thus forming a composite structure.Considering the material utilization and practical service process of the deposited component,more attention should be paid on this special composite structure,but the relevant investigation has not been carried out.In this study,an Al–Mg–Sc alloy was prepared by WA-DED with interlayer FSP treatment,and the composite structure was frstly investigated.Almost all of the pores were eliminated under the pressure efect from the tool shoulder.The grains were further refned with an average size of about 1.2μm in the PZ.Though no severe plastic deformation was involved in the retained WA-DED deposition zone,comparable tensile properties with the PZ sample were obtained in the composite structure.Low ultimate tensile strength(UTS)of 289 MPa and elongation of 3.2%were achieved in the WA-DED sample.After interlayer FSP treatment,the UTS and elongation of the PZ samples were signifcantly increased to 443 MPa and 16.3%,while those in the composite structure remained at relatively high levels of 410 MPa and 13.5%,respectively.Meanwhile,a high fatigue strength of 180 and 130 MPa was obtained in the PZ and composite structure samples,which was clearly higher than that of the WA-DED sample(100 MPa).It is concluded that the defects in traditional WA-DED process can be eliminated in the composite structure after interlayer FSP treatment,resulting in enhanced tensile and fatigue properties,which provides an efective method of improving the mechanical properties of the WA-DED sample.展开更多
The compression and energy absorption properties of foam geopolymers increase stress wave attenuation under explosion impacts,reducing the vibration effect on the structure.Explosion tests were conducted using several...The compression and energy absorption properties of foam geopolymers increase stress wave attenuation under explosion impacts,reducing the vibration effect on the structure.Explosion tests were conducted using several composite structure models,including a concrete lining structure(CLS)without foam geopolymer and six foam geopolymer composite structures(FGCS)with different backfill parameters,to study the dynamic response and wave dissipation mechanisms of FGCS under explosive loading.Pressure,strain,and vibration responses at different locations were synchronously tested.The damage modes and dynamic responses of different models were compared,and how wave elimination and energy absorption efficiencies were affected by foam geopolymer backfill parameters was analyzed.The results showed that the foam geopolymer absorbed and dissipated the impact energy through continuous compressive deformation under high strain rates and dynamic loading,reducing the strain in the liner structure by 52%and increasing the pressure attenuation rate by 28%.Additionally,the foam geopolymer backfill reduced structural vibration and liner deformation,with the FGCS structure showing 35%less displacement and 70%less acceleration compared to the CLS.The FGCS model with thicker,less dense foam geopolymer backfill,having more pores and higher porosity,demonstrated better compression and energy absorption under dynamic impact,increasing stress wave attenuation efficiency.By analyzing the stress wave propagation and the compression characteristics of the porous medium,it was concluded that the stress transfer ratio of FGCS-ρ-579 was 77%lower than that of CLS,and the transmitted wave energy was 90%lower.The results of this study provide a scientific basis for optimizing underground composite structure interlayer parameters.展开更多
Inspired by natural biomimetic structures exemplified by femoral bones,the shell-infill composite design has emerged as a research focus in structural optimization.However,existing studies predominantly focus on unifo...Inspired by natural biomimetic structures exemplified by femoral bones,the shell-infill composite design has emerged as a research focus in structural optimization.However,existing studies predominantly focus on uniform-thickness shell designs and lack robust methodologies for generating high-resolution porous infill configurations.To address these challenges,a novel topology optimization framework for full-scale shell-filled composite structures is developed in this paper.First,a physics-driven,non-uniform partial differential equation(PDE)filter is developed,enabling precise control of variable-thickness shells by establishing explicit mapping relationships between shell thickness and filter radii.Second,this study addresses the convergence inefficiency of traditional full-scale topology optimization methods based on local volume constraints.It is revealed that a reduced influence radius exacerbates algorithm convergence challenges,thereby impeding the design of intricate porous structures.To overcome this bottleneck,a physics-driven stress skeleton generation method is developed.By integrating stress trajectories and rasterization processing,this method constructs an initial density field,effectively guiding material evolution and significantly enhancing convergence in porous structural optimization within the full-scale framework.Classical numerical examples demonstrate that our proposed optimization framework achieves biomimetic non-uniform shell thickness optimization and enables precise control of the shell thickness.Additionally,density preprocessing effectively eliminates intermediate density regions and void aggregation.Moreover,the generated trabecular-like infill patterns with spatially graded porosity,akin to multiscale topology optimization(MTO),provide an innovative solution for multifunctional,lightweight,complex shell-infill composite structures in aerospace and biomedical applications.展开更多
This paper presents a deep learning-based topology optimization method for the joint design of material layout and fiber orientation in continuous fiber-reinforced composite structure(CFRCS).The proposed method mainly...This paper presents a deep learning-based topology optimization method for the joint design of material layout and fiber orientation in continuous fiber-reinforced composite structure(CFRCS).The proposed method mainly includes three steps:(1)a ResUNet-involved generative and adversarial network(ResUNet-GAN)is developed to establish the end-to-end mapping from structural design parameters to fiber-reinforced composite optimized structure,and a fiber orientation chromatogram is presented to represent continuous fiber angles;(2)to avoid the local optimum problem,the independent continuous mapping method(ICM method)considering the improved principal stress orientation interpolated continuous fiber angle optimization(PSO-CFAO)strategy is utilized to construct CFRCS topology optimization dataset;(3)the well-trained ResUNet-GAN is deployed to design the optimal structural material distribution together with the corresponding continuous fiber orientations.Numerical simulations for benchmark structure verify that the proposed method greatly improves the design efficiency of CFRCS along with high design accuracy.Furthermore,the CFRCS topology configuration designed by ResUNet-GAN is fabricated by additive manufacturing.Compression experiments of the specimens show that both the stiffness structure and peak load of the CFRCS topology configuration designed by the proposed method have significantly enhanced.The proposed deep learning-based topology optimization method will provide great flexibility in CFRCS for engineering applications.展开更多
The stability of the“surrounding rock-backfill”com posite system is crucial for the safety of mining stopes.This study systematically investigates the effects of steel slag(SS)content and interface angle on the stre...The stability of the“surrounding rock-backfill”com posite system is crucial for the safety of mining stopes.This study systematically investigates the effects of steel slag(SS)content and interface angle on the strength and failure characteristics of rock and SS-cemented paste backfill composite specimens(RBCS)through uniaxial compression strength tests(UCS),acoustic emission systems(AE),and 3 D digital image correlation monitoring technology(3 D-DIC).The intrinsic mechanism by which SS content influences the strength of SS-CPB was revealed through an analysis of its hydration reaction degree and microstructural characteristics under varying SS content.Moreover,a theoretical strength model incorporating different interface angles was developed to explore the impact of interface inclination on failure modes and mechanical strength.The main conclusions are as follows:The incorporation of SS enhances the plastic characteristics of RBCS and reduces its brittleness,with the increase of SS content,the stress-strain curve of RBCS in the“staircase-like”stag e becomes smoother;When the interface angle is 45°,the RBCS stress-strain curve exhibits a bimodal feature,and the failure mode changes from Y-shaped fractures to interface and axial splitting;The addition of SS results in a reduction of hydration products such as Ca(OH)_(2) in the backfill cementing system and an increase in harmful pores,which weakens the bonding performance and strength of RBCS,and the SS content should not exceed 45%;As the interface angle increases,the strength of RBCS decreases,and the critical interface slip angle decreases first and then increases with the increase in the E S/E R ratio.This study provides technical references for the large-scale application of SS in mine backfill.展开更多
In this study,the free vibration of a piezoelectric semiconductor(PS)composite structure composed of a PS layer,a fractional viscoelastic layer,and an elastic substrate with simply-supported boundary conditions is inv...In this study,the free vibration of a piezoelectric semiconductor(PS)composite structure composed of a PS layer,a fractional viscoelastic layer,and an elastic substrate with simply-supported boundary conditions is investigated.The fractional derivative Zener model is used to establish the constitutive relation of the viscoelastic layer.The first-order shear deformation theory and Hamilton's principle are used to derive the motion equations of the present problem.The frequency parameter is numerically resolved with the Newton-Raphson method through the eigenvalue equation.The effects of either geometric parameters,carrier density,and electric voltage applied on the surface of the composite structure or the fractional order of the Zener model on both the natural frequency and loss factor are discussed,and some interesting conclusions are drawn.This work will be helpful for designing and manufacturing PS materials and structures.展开更多
Insufficient metallurgical compatibility between Zr and Ni can lead to the formation of brittle welds and introduce thermal stress-related challenges during the electron beam welding process.Through the implementation...Insufficient metallurgical compatibility between Zr and Ni can lead to the formation of brittle welds and introduce thermal stress-related challenges during the electron beam welding process.Through the implementation of beam deflection and vibration,a transformation was achieved in the primary Ni_(5)Zr dendrite structure,transitioning from a mass into a layered configuration,consequently resulting in the formation of an ultrafine-grained eutectic−dendrite complex structure.It is revealed that the enhanced strength−ductility synergy of this structure significantly contributes to the high tensile strength and improved plasticity observed in the welded joints.As a result,the welding cracks are effectively mitigated,and notable advancements are achieved in the mechanical properties of Zr/Ni joints,elevating the tensile strength of the joints from 36.4 to 189 MPa.This research not only highlights the potential of this technique in enhancing the strength and ductility of Zr/Ni welded joints but also serves as a valuable reference for future investigations involving welding applications of dissimilar metals.展开更多
Aiming at addressing the issues of unclear dynamic response mechanisms and insufficient quantification of temperature coupling effects in building structures under long-duration blast loads,this study investigates typ...Aiming at addressing the issues of unclear dynamic response mechanisms and insufficient quantification of temperature coupling effects in building structures under long-duration blast loads,this study investigates typical composite beam-slab structures through integrated blast shock tube experiments and multiscale numerical simulations using Voronoi-coupled Finite-Discrete Element Method(VoroFDEM).The research systematically reveals the dynamic response mechanisms and damage evolution patterns of composite beam-slab structures subjected to prolonged blast loading.An environmenttemperature-coupled P-I curve damage assessment system is established,and a rapid evaluation method based on image crack characteristics is proposed,achieving innovative transition from traditional mechanical indicators to intelligent recognition paradigms.Results demonstrate that composite beam-slab structures exhibit three-phase failure modes:elastic vibration,plastic hinge formation,and global collapse.Numerical simulations identify the brittle-to-ductile transition temperature threshold at-10℃,and establish a temperature-dependent piecewise function-based P-I curve prediction model,whose overpressure asymptote displays nonlinear temperature sensitivity within-50-30℃.A novel dual-mode evaluation methodology integrating Voro-FDEM numerical simulations with image-based damage feature recognition is developed,enabling quantitative mapping between crack area and destruction levels.These findings provide theoretical foundations and technical pathways for rapid blast damage assessment and protective engineering design.展开更多
Controlled photocatalytic conversion of CO_(2) into premium fuel such as methane(CH4)offers a sustainable pathway towards a carbon energy cycle.However,the photocatalytic efficiency and selectivity are still unsatisfa...Controlled photocatalytic conversion of CO_(2) into premium fuel such as methane(CH4)offers a sustainable pathway towards a carbon energy cycle.However,the photocatalytic efficiency and selectivity are still unsatisfactory due to the limited availability of active sites on the current photocatalysts.To resolve this issue,the design of oxygen vacancies(OVs)in metal-oxide semiconductors is an effective option.Herein,in situ deposition of TiO_(2) onto SiO_(2) nanospheres to construct a SiO_(2)@TiO_(2) core-shell structure was performed to modulate the oxygen vacancy concentrations.Meanwhile,charge redistribution led to the formation of abundant OV-regulated Ti-Ti(Ti-OV-Ti)dual sites.It is revealed that Ti-OV-Ti dual sites served as the key active site for capturing the photogenerated electrons during light-driven CO_(2) reduction reaction(CO_(2)RR).Such electron-rich active sites enabled efficient CO_(2) adsorption and activation,thus lowering the energy barrier associated with the rate-determining step.More importantly,the formation of a highly stable*CHO intermediate at Ti-OV-Ti dual sites energetically favored the reaction pathway towards the production of CH4 rather than CO,thereby facilitating the selective product of CH_(4).As a result,SiO_(2)@TiO_(2)-50 with an optimized oxygen vacancy concentration of 9.0% showed a remarkable selectivity(90.32%)for CH_(4) production with a rate of 13.21μmol g^(-1) h^(-1),which is 17.38-fold higher than that of pristine TiO_(2).This study provides a new avenue for engineering superior photocatalysts through a rational methodology towards selective reduction of CO_(2).展开更多
This study proposes a pre-strain optimization strategy for carbon fiber structural lithium-ion battery(SLIB) composites to inhibit the interfacial debonding between carbon fibers and solid-state electrolytes due to fi...This study proposes a pre-strain optimization strategy for carbon fiber structural lithium-ion battery(SLIB) composites to inhibit the interfacial debonding between carbon fibers and solid-state electrolytes due to fiber lithiation. Through an analytical shear-lag model and finite element simulations, it is demonstrated that applying tensile pre-strain to carbon fibers before electrode assembly effectively reduces the interfacial shear stress, thereby suppressing debonding. However, the excessive pre-strain can induce the interfacial damage in the unlithiated state, necessitating careful control of the pre-strain within a feasible range. This range is influenced by electrode material properties and geometric parameters. Specifically, the electrodes with the higher solid-state electrolyte elastic modulus and larger electrolyte volume fraction exhibit more significant interfacial damage, making pre-strain application increasingly critical. However, these conditions also impose stricter constraints on the feasible pre-strain range. By elucidating the interplay between pre-strain, material properties, and geometric factors, this study provides valuable insights for optimizing the design of carbon fiber SLIBs.展开更多
An effective optimization method for the shape/sizing design of composite wing structures is presented with satisfying weight-cutting results. After decoupling, a kind of two-layer cycled optimization strategy suitabl...An effective optimization method for the shape/sizing design of composite wing structures is presented with satisfying weight-cutting results. After decoupling, a kind of two-layer cycled optimization strategy suitable for these integrated shape/sizing optimization is obtained. The uniform design method is used to provide sample points, and approximation models for shape design variables. And the results of sizing optimization are construct- ed with the quadratic response surface method （QRSM）. The complex method based on QRSM is used to opti- mize the shape design variables and the criteria method is adopted to optimize the sizing design variables. Compared with the conventional method, the proposed algorithm is more effective and feasible for solving complex composite optimization problems and has good efficiency in weight cutting.展开更多
The samples of brazed diamond grits with NiCr brazing alloy are prepared in vacuum and argon gas. The microstructures are analyzed with scanning electron microscope （SEM）, energy dispersive X-ray spectroscopy （EDS...The samples of brazed diamond grits with NiCr brazing alloy are prepared in vacuum and argon gas. The microstructures are analyzed with scanning electron microscope （SEM）, energy dispersive X-ray spectroscopy （EDS） and X-ray diffraction（XRD）. The effects of brazing atmospheres on the as-brazed NiCr brazing alloy composite structures and interracial microstructure are studied between diamond grits and brazing alloy. Results show that： （1） There are different composite structures of as-brazed NiCr brazing alloy under different oxygen partial pressures in vacuum and argon gas. B203 exists on the surface of the brazed samples under argon gas furnace brazing. It indicates that oxygen plays an important role in the resultants of as-brazed NiCr brazing alloy during the brazing process. （2） There are different interfacial microstructures in different brazing atmospheres, but the main reaction product is chromium carbides. The chromium carbides in argon gas furnace brazing grow in a disordered form, but those in vacuum furnace brazing grow radiated. And the scale of grains in argon gas is smaller than those in vacuum.展开更多
基金support by the National Natural Science Foundation of China(Grant Nos.U23A20546 and 52271010)the Chinese National Natural Science Fund for Distinguished Young Scholars(Grant No.52025015)the Natural Science Foundation of Tianjin City(No.21JCZDJC00510).
文摘1.Introduction The strength-ductility trade-offdilemma has long been a per-sistent challenge in Al matrix composites(AMCs)[1,2].This is-sue primarily arises from the agglomeration of reinforcements at the grain boundaries(GBs),which restricts local plastic flow dur-ing the plastic deformation and leads to stress concentration[3,4].Recently,the development of concepts aimed at achieving hetero-geneous grain has emerged as a promising approach for enhanc-ing comprehensive mechanical properties[5,6].
基金supported by the Guangdong Basic and Applied Basic Research Foundation (2020B1515120013,2022B1515120066)National Natural Science Foundation of China (Nos.U2001218, 51875215)+1 种基金Key-Area Research and Development Program of Guangdong Province (2020B090923001)Special Support Foundation of Guangdong Province (No.2019TQ05Z110)。
文摘It has always been challenging work to reconcile the contradiction between the strength and plasticity of titanium materials.Laser powder bed fusion(LPBF) is a convenient method to fabricate innovative composites including those inspired by gradient layered materials.In this work,we used LPBF to selectively prepare Ti N/Ti gradient layered structure(GLSTi)composites by using different N_(2)–Ar ratios during the LPBF process.We systematically investigated the mechanisms of in-situ synthesis Ti N,high strength and ductility of GLSTi composites using microscopic analysis,TEM characterization,and tensile testing with digital image correlation.Besides,a digital correspondence was established between the N_(2) concentration and the volume fraction of LPBF in-situ synthesized Ti N.Our results show that the GLSTi composites exhibit superior mechanical properties compared to pure titanium fabricated by LPBF under pure Ar.Specifically,the tensile strength of GLSTi was more than 1.5times higher than that of LPBF-formed pure titanium,reaching up to 1100 MPa,while maintaining a high elongation at fracture of 17%.GLSTi breaks the bottleneck of high strength but low ductility exhibited by conventional nanoceramic particle-strengthened titanium matrix composites,and the hetero-deformation induced strengthening effect formed by the Ti N/Ti layered structure explained its strength-plasticity balanced principle.The microhardness exhibits a jagged variation of the relatively low hardness of 245 HV0.2 for the pure titanium layer and a high hardness of 408 HV0.2 for the N_(2) in-situ synthesis layer.Our study provides a new concept for the structure-performance digital customization of 3D-printed Ti-based composites.
基金financially supported by the National Natural Science Foundation of China (No.51372108)。
文摘Developing high-performance electromagnetic absorbing materials remains a challenge.In this work,Gd-Co ferrite@carbon core-shell structure composites were synthesized by a two-step hydrothermal method.The effects of rare earth Gd doping amount on the microstructure and electromagnetic wave absorption properties of cobalt ferrite@carbon composites were mainly studied.The results show that an appropriate amount of Gd doping can refine the crystal grain size of cobalt ferrite@carbon composites.However,when the doping amount of Gd exceeds the solid solubility threshold,the secondary phase GdFeO_(3)will be generated and the grain size will increase.When the doping amount of Gd is x=0.04,the reflection loss(RL) of the CoFe_(1.96)Gd_(0.04)O_(4)@C composites reaches the minimum value of -9.26 dB at the absorption layer thickness of 2.0 mm and a frequency of 13.67 GHz,and the effective absorption band(EAB) is 5.01 GHz(10.95-15.96 GHz).Compared with the CoFe_(2)O_(4)@C composites,the RL of the CoFe_(1.96)Gd_(0.04)O_(4)@C composites is increased by 79.35%,and the EAB is broadened by 3.51%.Gd ions enhance the dielectric loss through the grain size effect,and the increase of magnetocrystalline anisotropy enhances the magnetic loss.The CoFe_(1.96)Gd_(0.04)O_(4)@C composites have excellent impedance matching,which relies on the strong magnetic loss of ferrite,the interface polarization,and dipole polarization formed by the carbon shell to attenuate electromagnetic waves.
基金Funded by the National Natural Science Foundation of China(51572208)the 111 Project(B13035)+1 种基金the National Natural Science Foundation of Hubei Province(2014CFB257 and 2014CFB258)the Fundamental Research Funds for the Central Universities(WUT:2015-III-059)
文摘A novel chemical technique combined with unique plasma activated sintering（PAS） was utilized to prepare consolidated copper matrix composites（CMCs） by adding Cu-SnO2-rGO layered micro powders as reinforced fillers into Cu matrix. The repeating Cu-SnO2-rGO structure was composed of inner dispersed reduced graphene oxide（r GO）, SnO2 as intermedia and outer Cu coating. SnO2 was introduced to the surface of rGO sheets in order to prevent the graphene aggregation with SnO2 serving as spacer and to provide enough active sites for subsequent Cu deposition. This process can guarantee rGO sheets to suffi ciently disperse and Cu nanoparticles to tightly and uniformly anchor on each layer of rGO by means of the SnO2 active sites as well as strictly control the reduction speed of Cu^2＋. The complete cover of Cu nanoparticles on rGO sheets thoroughly avoids direct contact among rGO layers. Hence, the repeating structure can simultaneously solve the wettability problem between rGO and Cu matrix as well as improve the bonding strength between rGO and Cu matrix at the well-bonded Cu-SnO2-rGO interface. The isolated rGO can effectively hinder the glide of dislocation at Cu-rGO interface and support the applied loads. Finally, the compressive strength of CMCs was enhanced when the strengthening effi ciency reached up to 41.
文摘Structures and properties of the blends of thermotropic liquid crystallinepolymer(LC70)and poly(ethylene terephthalate) (PET) were investigated by usingWAXD,DSC,SEM and mechanical test.The results revealed that Wc,x markdly decreased withLC70/PET>30%,and at about LC70/PET=10%, this blend can yield better mechanicalproperties.In these blends LC70 can play the role of the nuclear agent for PET.SEMphoto showed that LC70/PET in in-situ composites possessed 'core-shell' structure andwas immiscible, but at LC70/PST=10%, the LC70 can be uniformly dispersed into matrix PET.
基金supported by the National Natural Science Foundation of China(Nos.62101020 and 62141405)the Special Scientific Research Project of Civil Aircraft,China(No.MJZ5-2N22).
文摘As the proportion of composite materials used in aircraft continues to increase, the electromagnetic Shielding Effectiveness (SE) of these materials becomes a critical factor in the electromagnetic safety design of aircraft structures. The assessment of electromagnetic SE for Slotted Composite Structures(SCSs) is particularly challenging due to their complex geometries and there remains a lack of suitable models for accurately predicting the SE performance of these intricate configurations. To address this issue, this paper introduces SCS-Net, a Deep Neural Network (DNN) method designed to accurately predict the SE of SCS. This method considers the impacts of various structural parameters, material properties and incident wave parameters on the SE of SCSs. In order to better model the SCS, an improved Nicolson-Ross-Weir (NRW) method is introduced in this paper to provide an equivalent flat structure for the SCS and to calculate the electromagnetic parameters of the equivalent structure. Additionally, the prediction of SE via DNNs is limited by insufficient test data, which hinders support for large-sample training. To address the issue of limited measured data, this paper develops a Measurement-Computation Fusion (MCF) dataset construction method. The predictions based on the simulation results show that the proposed method maintains an error of less than 0.07 dB within the 8–10 GHz frequency range. Furthermore, a new loss function based on the weighted L1-norm is established to improve the prediction accuracy for these parameters. Compared with traditional loss functions, the new loss function reduces the maximum prediction error for equivalent electromagnetic parameters by 47%. This method significantly improves the prediction accuracy of SCS-Net for measured data, with a maximum improvement of 23.88%. These findings demonstrate that the proposed method enables precise SE prediction and design for composite structures while reducing the number of test samples needed.
文摘The damage distribution of the same type of aircraft in similar service environments should be similar. Based on this assumption, to perform the maintenance and repair of aircraft composite structures, the damage of composite structures in a certain type of aircraft were investigated. The time-varying damage distribution model was established and verified based on the damage of a 16-aircraft fleet. The results show that the quantitative proportions of structural damage are 74% for skin delamination, 22% for stringer delamination and 3% for stringer-skin interface debonding. The amount of structural damages increases linearly with service time while the proportion of different damages does not change. As the service time increases, the geometric parameter distribution of damage for the same type of aircraft gradually converges, which can be approximated using the same function. There are certain differences in the proportion and geometric parameter distribution of damages among different components and locations, and the differences do not change over time.
基金funded by the National Natural Science Foundation of China(Grant No.52276047)the Open Fund of NationalKey Laboratory of SpacecraftThermal Control(Grant No.NKLST-JJ-202401011)the Beijing Municipal Science&Technology Commission(Grant No.Z231100006123010).
文摘Flow boiling in open microchannels offers highly efficient heat transfer performance and has attracted increasing attention in the fields of heat transfer and thermalmanagement of electronic devices in recent years.However,the continuous rise in power density of electronic components imposesmore stringent requirements on the heat transfer capability of microchannel flow boiling.HFE-7100,a dielectric coolant with favorable thermophysical properties,has become a focal point of research for enhancing flow boiling performance in open microchannels.The flow boiling heat transfer performance ofHFE-7100 was investigated in this study by fabricating micro-nano composite structures on the bottom surface of open microchannels using laser ablation technology.Based on visualization results,a comparative analysis was conducted on the bubble dynamics and flow pattern characteristics of HFE-7100 flow boiling in micronano structured open microchannels(MNSOMC)and smooth-surface open microchannels(SSOMC),to elucidate the enhancement mechanism of micro-nano structures on flow boiling heat transfer in open microchannels.The results indicate that the surface structures and strong wettability of MNSOMC accelerated bubble nucleation and departure.Moreover,bubbles in the channel tended to coalesce along the flow direction,forming elongated slug bubbles with high aspect ratios,which enabled efficient thin film evaporation in conjunction with intense nucleate boiling,thereby significantly enhancing flow boiling heat transfer.Under the experimental conditions of this study,the maximum enhancements in the heat transfer coefficient(HTC)and critical heat flux(CHF)of HFE-7100 inMNSOMC were 33.4%and 133.1%,respectively,with the CHF reaching up to 1542.3 kW⋅m^(−2).Furthermore,due to the superior wettability and capillary wicking capability of the micro-nano composite structures,the significant enhancement in flow boiling heat transfer was achieved without incurring a noticeable pressure drop penalty.
基金supported by the National Natural Science Foundation of China(No.U23A20538)the Fundamental Research Funds for the Universities of Liaoning Province,Shenyang U40 Outstanding Youth Foundation(No.RC230864)+1 种基金the Foundation of CAS Henan Industrial Technology Innovation&Incubation Center(No.2024110)the Natural Science Foundation of Liaoning Province(No.2023-BS-016)。
文摘Interlayer friction stir processing(FSP)has been proved to be an efective method of enhancing the mechanical properties of wire arc-directed energy deposited(WA-DED)samples.However,the original deposition structure was still retained in the FSP-WA-DED component besides the processed zone(PZ),thus forming a composite structure.Considering the material utilization and practical service process of the deposited component,more attention should be paid on this special composite structure,but the relevant investigation has not been carried out.In this study,an Al–Mg–Sc alloy was prepared by WA-DED with interlayer FSP treatment,and the composite structure was frstly investigated.Almost all of the pores were eliminated under the pressure efect from the tool shoulder.The grains were further refned with an average size of about 1.2μm in the PZ.Though no severe plastic deformation was involved in the retained WA-DED deposition zone,comparable tensile properties with the PZ sample were obtained in the composite structure.Low ultimate tensile strength(UTS)of 289 MPa and elongation of 3.2%were achieved in the WA-DED sample.After interlayer FSP treatment,the UTS and elongation of the PZ samples were signifcantly increased to 443 MPa and 16.3%,while those in the composite structure remained at relatively high levels of 410 MPa and 13.5%,respectively.Meanwhile,a high fatigue strength of 180 and 130 MPa was obtained in the PZ and composite structure samples,which was clearly higher than that of the WA-DED sample(100 MPa).It is concluded that the defects in traditional WA-DED process can be eliminated in the composite structure after interlayer FSP treatment,resulting in enhanced tensile and fatigue properties,which provides an efective method of improving the mechanical properties of the WA-DED sample.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52378401,12202494)the Fundamental Research Funds for the Central Universities(Grant No.30922010918)。
文摘The compression and energy absorption properties of foam geopolymers increase stress wave attenuation under explosion impacts,reducing the vibration effect on the structure.Explosion tests were conducted using several composite structure models,including a concrete lining structure(CLS)without foam geopolymer and six foam geopolymer composite structures(FGCS)with different backfill parameters,to study the dynamic response and wave dissipation mechanisms of FGCS under explosive loading.Pressure,strain,and vibration responses at different locations were synchronously tested.The damage modes and dynamic responses of different models were compared,and how wave elimination and energy absorption efficiencies were affected by foam geopolymer backfill parameters was analyzed.The results showed that the foam geopolymer absorbed and dissipated the impact energy through continuous compressive deformation under high strain rates and dynamic loading,reducing the strain in the liner structure by 52%and increasing the pressure attenuation rate by 28%.Additionally,the foam geopolymer backfill reduced structural vibration and liner deformation,with the FGCS structure showing 35%less displacement and 70%less acceleration compared to the CLS.The FGCS model with thicker,less dense foam geopolymer backfill,having more pores and higher porosity,demonstrated better compression and energy absorption under dynamic impact,increasing stress wave attenuation efficiency.By analyzing the stress wave propagation and the compression characteristics of the porous medium,it was concluded that the stress transfer ratio of FGCS-ρ-579 was 77%lower than that of CLS,and the transmitted wave energy was 90%lower.The results of this study provide a scientific basis for optimizing underground composite structure interlayer parameters.
基金supported by the Defense Industrial Technology Development Program.
文摘Inspired by natural biomimetic structures exemplified by femoral bones,the shell-infill composite design has emerged as a research focus in structural optimization.However,existing studies predominantly focus on uniform-thickness shell designs and lack robust methodologies for generating high-resolution porous infill configurations.To address these challenges,a novel topology optimization framework for full-scale shell-filled composite structures is developed in this paper.First,a physics-driven,non-uniform partial differential equation(PDE)filter is developed,enabling precise control of variable-thickness shells by establishing explicit mapping relationships between shell thickness and filter radii.Second,this study addresses the convergence inefficiency of traditional full-scale topology optimization methods based on local volume constraints.It is revealed that a reduced influence radius exacerbates algorithm convergence challenges,thereby impeding the design of intricate porous structures.To overcome this bottleneck,a physics-driven stress skeleton generation method is developed.By integrating stress trajectories and rasterization processing,this method constructs an initial density field,effectively guiding material evolution and significantly enhancing convergence in porous structural optimization within the full-scale framework.Classical numerical examples demonstrate that our proposed optimization framework achieves biomimetic non-uniform shell thickness optimization and enables precise control of the shell thickness.Additionally,density preprocessing effectively eliminates intermediate density regions and void aggregation.Moreover,the generated trabecular-like infill patterns with spatially graded porosity,akin to multiscale topology optimization(MTO),provide an innovative solution for multifunctional,lightweight,complex shell-infill composite structures in aerospace and biomedical applications.
基金supported by the National Natural Science Foundation of China(Grant No.11872080)Beijing Natural Science Foundation(Grant No.3192005).
文摘This paper presents a deep learning-based topology optimization method for the joint design of material layout and fiber orientation in continuous fiber-reinforced composite structure(CFRCS).The proposed method mainly includes three steps:(1)a ResUNet-involved generative and adversarial network(ResUNet-GAN)is developed to establish the end-to-end mapping from structural design parameters to fiber-reinforced composite optimized structure,and a fiber orientation chromatogram is presented to represent continuous fiber angles;(2)to avoid the local optimum problem,the independent continuous mapping method(ICM method)considering the improved principal stress orientation interpolated continuous fiber angle optimization(PSO-CFAO)strategy is utilized to construct CFRCS topology optimization dataset;(3)the well-trained ResUNet-GAN is deployed to design the optimal structural material distribution together with the corresponding continuous fiber orientations.Numerical simulations for benchmark structure verify that the proposed method greatly improves the design efficiency of CFRCS along with high design accuracy.Furthermore,the CFRCS topology configuration designed by ResUNet-GAN is fabricated by additive manufacturing.Compression experiments of the specimens show that both the stiffness structure and peak load of the CFRCS topology configuration designed by the proposed method have significantly enhanced.The proposed deep learning-based topology optimization method will provide great flexibility in CFRCS for engineering applications.
基金Project(52308316)supported by the National Natural Science Foundation of China,Project(BBJ2024088)supported by the Fundamental Research Funds for the Central Universities(PhD.Top Innovative Talents Fund of CUMTB),China。
文摘The stability of the“surrounding rock-backfill”com posite system is crucial for the safety of mining stopes.This study systematically investigates the effects of steel slag(SS)content and interface angle on the strength and failure characteristics of rock and SS-cemented paste backfill composite specimens(RBCS)through uniaxial compression strength tests(UCS),acoustic emission systems(AE),and 3 D digital image correlation monitoring technology(3 D-DIC).The intrinsic mechanism by which SS content influences the strength of SS-CPB was revealed through an analysis of its hydration reaction degree and microstructural characteristics under varying SS content.Moreover,a theoretical strength model incorporating different interface angles was developed to explore the impact of interface inclination on failure modes and mechanical strength.The main conclusions are as follows:The incorporation of SS enhances the plastic characteristics of RBCS and reduces its brittleness,with the increase of SS content,the stress-strain curve of RBCS in the“staircase-like”stag e becomes smoother;When the interface angle is 45°,the RBCS stress-strain curve exhibits a bimodal feature,and the failure mode changes from Y-shaped fractures to interface and axial splitting;The addition of SS results in a reduction of hydration products such as Ca(OH)_(2) in the backfill cementing system and an increase in harmful pores,which weakens the bonding performance and strength of RBCS,and the SS content should not exceed 45%;As the interface angle increases,the strength of RBCS decreases,and the critical interface slip angle decreases first and then increases with the increase in the E S/E R ratio.This study provides technical references for the large-scale application of SS in mine backfill.
基金supported by the National Natural Science Foundation of China(No.12372153)the Funding by Guangdong Basic and Applied Basic Research Foundation(No.2023A1515012366)。
文摘In this study,the free vibration of a piezoelectric semiconductor(PS)composite structure composed of a PS layer,a fractional viscoelastic layer,and an elastic substrate with simply-supported boundary conditions is investigated.The fractional derivative Zener model is used to establish the constitutive relation of the viscoelastic layer.The first-order shear deformation theory and Hamilton's principle are used to derive the motion equations of the present problem.The frequency parameter is numerically resolved with the Newton-Raphson method through the eigenvalue equation.The effects of either geometric parameters,carrier density,and electric voltage applied on the surface of the composite structure or the fractional order of the Zener model on both the natural frequency and loss factor are discussed,and some interesting conclusions are drawn.This work will be helpful for designing and manufacturing PS materials and structures.
基金supported by the National Natural Science Foundation of China(No.52375322).
文摘Insufficient metallurgical compatibility between Zr and Ni can lead to the formation of brittle welds and introduce thermal stress-related challenges during the electron beam welding process.Through the implementation of beam deflection and vibration,a transformation was achieved in the primary Ni_(5)Zr dendrite structure,transitioning from a mass into a layered configuration,consequently resulting in the formation of an ultrafine-grained eutectic−dendrite complex structure.It is revealed that the enhanced strength−ductility synergy of this structure significantly contributes to the high tensile strength and improved plasticity observed in the welded joints.As a result,the welding cracks are effectively mitigated,and notable advancements are achieved in the mechanical properties of Zr/Ni joints,elevating the tensile strength of the joints from 36.4 to 189 MPa.This research not only highlights the potential of this technique in enhancing the strength and ductility of Zr/Ni welded joints but also serves as a valuable reference for future investigations involving welding applications of dissimilar metals.
基金supported by Open Research Fund of State Key Laboratory of Target Vulnerability Assessment,Defense Engineering Institute,AMS,PLA(Grant No.YSX2024KFPG002)。
文摘Aiming at addressing the issues of unclear dynamic response mechanisms and insufficient quantification of temperature coupling effects in building structures under long-duration blast loads,this study investigates typical composite beam-slab structures through integrated blast shock tube experiments and multiscale numerical simulations using Voronoi-coupled Finite-Discrete Element Method(VoroFDEM).The research systematically reveals the dynamic response mechanisms and damage evolution patterns of composite beam-slab structures subjected to prolonged blast loading.An environmenttemperature-coupled P-I curve damage assessment system is established,and a rapid evaluation method based on image crack characteristics is proposed,achieving innovative transition from traditional mechanical indicators to intelligent recognition paradigms.Results demonstrate that composite beam-slab structures exhibit three-phase failure modes:elastic vibration,plastic hinge formation,and global collapse.Numerical simulations identify the brittle-to-ductile transition temperature threshold at-10℃,and establish a temperature-dependent piecewise function-based P-I curve prediction model,whose overpressure asymptote displays nonlinear temperature sensitivity within-50-30℃.A novel dual-mode evaluation methodology integrating Voro-FDEM numerical simulations with image-based damage feature recognition is developed,enabling quantitative mapping between crack area and destruction levels.These findings provide theoretical foundations and technical pathways for rapid blast damage assessment and protective engineering design.
基金supported by the National Natural Science Foundation of China(No.21773089,22202037)the Science and Technology Development Plan Project of Jilin Province,China(No.20240101192JC)the Fundamental Research Funds for the Central Universities(No.2412023QD019).
文摘Controlled photocatalytic conversion of CO_(2) into premium fuel such as methane(CH4)offers a sustainable pathway towards a carbon energy cycle.However,the photocatalytic efficiency and selectivity are still unsatisfactory due to the limited availability of active sites on the current photocatalysts.To resolve this issue,the design of oxygen vacancies(OVs)in metal-oxide semiconductors is an effective option.Herein,in situ deposition of TiO_(2) onto SiO_(2) nanospheres to construct a SiO_(2)@TiO_(2) core-shell structure was performed to modulate the oxygen vacancy concentrations.Meanwhile,charge redistribution led to the formation of abundant OV-regulated Ti-Ti(Ti-OV-Ti)dual sites.It is revealed that Ti-OV-Ti dual sites served as the key active site for capturing the photogenerated electrons during light-driven CO_(2) reduction reaction(CO_(2)RR).Such electron-rich active sites enabled efficient CO_(2) adsorption and activation,thus lowering the energy barrier associated with the rate-determining step.More importantly,the formation of a highly stable*CHO intermediate at Ti-OV-Ti dual sites energetically favored the reaction pathway towards the production of CH4 rather than CO,thereby facilitating the selective product of CH_(4).As a result,SiO_(2)@TiO_(2)-50 with an optimized oxygen vacancy concentration of 9.0% showed a remarkable selectivity(90.32%)for CH_(4) production with a rate of 13.21μmol g^(-1) h^(-1),which is 17.38-fold higher than that of pristine TiO_(2).This study provides a new avenue for engineering superior photocatalysts through a rational methodology towards selective reduction of CO_(2).
基金supported by the National Natural Science Foundation of China(Nos.12172205,12072183,12102244,and 12472174)。
文摘This study proposes a pre-strain optimization strategy for carbon fiber structural lithium-ion battery(SLIB) composites to inhibit the interfacial debonding between carbon fibers and solid-state electrolytes due to fiber lithiation. Through an analytical shear-lag model and finite element simulations, it is demonstrated that applying tensile pre-strain to carbon fibers before electrode assembly effectively reduces the interfacial shear stress, thereby suppressing debonding. However, the excessive pre-strain can induce the interfacial damage in the unlithiated state, necessitating careful control of the pre-strain within a feasible range. This range is influenced by electrode material properties and geometric parameters. Specifically, the electrodes with the higher solid-state electrolyte elastic modulus and larger electrolyte volume fraction exhibit more significant interfacial damage, making pre-strain application increasingly critical. However, these conditions also impose stricter constraints on the feasible pre-strain range. By elucidating the interplay between pre-strain, material properties, and geometric factors, this study provides valuable insights for optimizing the design of carbon fiber SLIBs.
文摘An effective optimization method for the shape/sizing design of composite wing structures is presented with satisfying weight-cutting results. After decoupling, a kind of two-layer cycled optimization strategy suitable for these integrated shape/sizing optimization is obtained. The uniform design method is used to provide sample points, and approximation models for shape design variables. And the results of sizing optimization are construct- ed with the quadratic response surface method （QRSM）. The complex method based on QRSM is used to opti- mize the shape design variables and the criteria method is adopted to optimize the sizing design variables. Compared with the conventional method, the proposed algorithm is more effective and feasible for solving complex composite optimization problems and has good efficiency in weight cutting.
基金Supported by the National Natural Science Foundation of China(50475040)the Aeronautical Science Foundation of China(2005ZH52060)the Natural Science Foundation of Jiangsu Province(BK2006723)~~
文摘The samples of brazed diamond grits with NiCr brazing alloy are prepared in vacuum and argon gas. The microstructures are analyzed with scanning electron microscope （SEM）, energy dispersive X-ray spectroscopy （EDS） and X-ray diffraction（XRD）. The effects of brazing atmospheres on the as-brazed NiCr brazing alloy composite structures and interracial microstructure are studied between diamond grits and brazing alloy. Results show that： （1） There are different composite structures of as-brazed NiCr brazing alloy under different oxygen partial pressures in vacuum and argon gas. B203 exists on the surface of the brazed samples under argon gas furnace brazing. It indicates that oxygen plays an important role in the resultants of as-brazed NiCr brazing alloy during the brazing process. （2） There are different interfacial microstructures in different brazing atmospheres, but the main reaction product is chromium carbides. The chromium carbides in argon gas furnace brazing grow in a disordered form, but those in vacuum furnace brazing grow radiated. And the scale of grains in argon gas is smaller than those in vacuum.
