We consider a wide range of non-convex regularized minimization problems, where the non-convex regularization term is composite with a linear function engaged in sparse learning. Recent theoretical investigations have...We consider a wide range of non-convex regularized minimization problems, where the non-convex regularization term is composite with a linear function engaged in sparse learning. Recent theoretical investigations have demonstrated their superiority over their convex counterparts. The computational challenge lies in the fact that the proximal mapping associated with non-convex regularization is not easily obtained due to the imposed linear composition. Fortunately, the problem structure allows one to introduce an auxiliary variable and reformulate it as an optimization problem with linear constraints, which can be solved using the Linearized Alternating Direction Method of Multipliers （LADMM）. Despite the success of LADMM in practice, it remains unknown whether LADMM is convergent in solving such non-convex compositely regularized optimizations. In this research, we first present a detailed convergence analysis of the LADMM algorithm for solving a non-convex compositely regularized optimization problem with a large class of non-convex penalties. Furthermore, we propose an Adaptive LADMM （AdaLADMM） algorithm with a line-search criterion. Experimental results on different genres of datasets validate the efficacy of the proposed algorithm.展开更多
Ultrasonic-Assisted Grinding(UAG)is a novel manufacturing technology that shows promising promise for use in processing Ceramic Matrix Composites(CMCs).Nevertheless,analyzing the material removal process of CMCs with ...Ultrasonic-Assisted Grinding(UAG)is a novel manufacturing technology that shows promising promise for use in processing Ceramic Matrix Composites(CMCs).Nevertheless,analyzing the material removal process of CMCs with multidirectional structure during UAG is challenging,impeding the progress and improvement of the UAG process.This work examined the impact of ultrasonic vibration on the dynamic mechanical characteristics during processing.Additionally,we experimentally elucidated the material removal mechanism of CMCs during the scratching process under the influence of vertical vibration.The results indicate that the introduction of ultrasonic vibration causes a strain rate effect,resulting in a modification of the material removal mechanism,subsequently impacting the processing quality.Ultrasonic vibration increases the dynamic strength and brittleness of the fibers in CMCs,leading to more cracks at fracture,which changes from the original bending fracture to shear fracture.In addition,ultrasonic vibration can effectively inhibit the impact of scratching depth and anisotropy on the removal mechanism of CMCs,resulting in a more uniform surface of CMCs after processing.展开更多
Among various architectures of polymers,end-group-free rings have attracted growing interests due to their distinct physicochemical performances over the linear counterparts which are exemplified by reduced hydrodynam...Among various architectures of polymers,end-group-free rings have attracted growing interests due to their distinct physicochemical performances over the linear counterparts which are exemplified by reduced hydrodynamic size and slower degradation.It is key to develop facile methods to large-scale synthesis of polymer rings with tunable compositions and microstructures.Recent progresses in large-scale synthesis of polymer rings against single-chain dynamic nanoparticles,and the example applications in synchronous enhancing toughness and strength of polymer nanocomposites are summarized.Once there is the breakthrough in rational design and effective large-scale synthesis of polymer rings and their functional derivatives,a family of cyclic functional hybrids would be available,thus providing a new paradigm in developing polymer science and engineering.展开更多
With the rapid development of modern electronic technology,the demand for high-performance microwave absorption materials has increased dramatically.In order to meet this demand,the electrospinning of FeNiCo/carbon na...With the rapid development of modern electronic technology,the demand for high-performance microwave absorption materials has increased dramatically.In order to meet this demand,the electrospinning of FeNiCo/carbon nanofiber(FeNiCo/CNF)composites with excellent microwave absorption properties was developed,and their potential as high frequency microwave absorption materials was evaluated.Experiment showed that FeNiCo/CNFs achieve a minimum reflection loss(RL_(min))of−55.5 dB with a matching thickness of only 1.6 mm.Microstructure analysis and electromagnetic parameter testing showed that the excellent microwave absorbing properties were mainly due to the combined effect of the network structure of carbon nanofibers and the FeNiCo alloy.This interaction promotes multiple reflections and the efficient absorption of microwaves.Computer simulation also showed that the FeNiCo/CNF composites produce an excellent radar cross-section reduction in typical radar operating frequency bands,which validates their potential application in stealth technology.This is a new concept in the development of high-performance microwave absorption materials.展开更多
KIT-5/Beta composite supports were synthesized using an in situ self-assembly hydrothermal method,and NiW/KIT-5/Beta catalysts were prepared by impregnation.A series of characterization techniques were utilized to eva...KIT-5/Beta composite supports were synthesized using an in situ self-assembly hydrothermal method,and NiW/KIT-5/Beta catalysts were prepared by impregnation.A series of characterization techniques were utilized to evaluate the influence of varying hydrothermal synthesis temperatures on the physicochemical properties of both the KIT-5/Beta supports and the resulting catalysts.The catalytic performances of catalysts were evaluated under reaction conditions of 320℃,4 MPa H_(2)pressure,and a weight hourly space velocity(WHSV)of 4.8 h^(-1)for hydrodenitrogenation(HDN)of quinoline.The results indicated that the specific surface area and pore structure of the materials could be effectively regulated by adjusting the hydrothermal synthesis temperature,which in turn influenced the number of active sites on the catalyst.The NiW/KB-125 catalyst,synthesized at 125℃,presented the highest quinoline HDN efficiency(96.8%),which can be attributed to its favorable pore channel structure,greater Brønsted acid number,higher degree of metal sulfidation(80.12%)and appropriate metal-support interaction(MSI).展开更多
Carbon fiber-reinforced carbon aerogel(C/CA)composites are one of the most promising candidates for applications requiring both thermal insulation and load bearing capabilities.The preparation of anti-oxidation coatin...Carbon fiber-reinforced carbon aerogel(C/CA)composites are one of the most promising candidates for applications requiring both thermal insulation and load bearing capabilities.The preparation of anti-oxidation coatings on C/CA to address its susceptibility to oxidation is a feasible approach to promote its application in oxidative environments.However,the currently reported coatings on C/CA mainly focus on improving the ablation performance and coating preparation process typically necessitating high-temperature heat treatment.This procedure can increase its thermal conductivity and reduce its thermal insulation ability.In this study,a series of ceramic-resin coatings were fabricated on C/CA through a simple slurry brushing-drying approach at room temperature.The effects of phenolic resin content on the coating structure,residual stress,thermal shock,and oxidation behaviors were investigated.Due to the adhesive properties and curing-induced shrinkage,the PR-7.5 coating(containing 7.5%(in mass)phenolic resin in the slurry)exhibits bonding strength close to fracture strength of the substrate and residual compressive stress of 0.853 GPa,which is beneficial for resisting thermal shock cracking.However,excessive resin content(PR-10.0 containing 10.0%(in mass)phenolic resin in the slurry)induces tensile stress due to uneven curing shrinkage,thereby leading to thermal shock cracking.Meanwhile,oxidation tests reveal significantly reduced weight losses for PR-7.5(17.46%at 800℃/100 min,8.15%at 1000℃/120 min,3.15%at 1200℃/120 min)versus uncoated C/CA’s 44.60%loss at 800℃/20 min.This work provides a brand-new and simple approach to improving the anti-oxidation performance of C/CA and expands its application in mild oxidative environments.展开更多
A composite electrocatalyst,CoMoNiO-S/NF-110(NF is nickel foam),was synthesized through electrodeposition,followed by pyrolysis and then the vulcanization process.CoMoNiO-S/NF-110 exhibited a structure where Ni3S2 and...A composite electrocatalyst,CoMoNiO-S/NF-110(NF is nickel foam),was synthesized through electrodeposition,followed by pyrolysis and then the vulcanization process.CoMoNiO-S/NF-110 exhibited a structure where Ni3S2 and Mo2S3 nanoparticles were integrated at the edges of Co3O4 nanosheets,creating a rich,heterogeneous interface that enhances the synergistic effects of each component.In an alkaline electrolyte,the synthesized CoMoNiO-S/NF-110 exhibited superior electrocatalytic performance for oxygen evolution reaction(OER),achieving current densities of 100 and 200 mA·cm^(-2) with low overpotentials of 199.4 and 224.4 mV,respectively,outperforming RuO2 and several high-performance Mo and Ni-based catalysts.This excellent performance is attributed to the rich interface formed between the components and active sites exposed by the defect structure.展开更多
The poor electrical conductivity of metal-organic frameworks(MOFs)limits their electrocatalytic performance in the oxygen evolution reaction(OER).In this study,a Py@Co-MOF composite material based on pyrene(Py)molecul...The poor electrical conductivity of metal-organic frameworks(MOFs)limits their electrocatalytic performance in the oxygen evolution reaction(OER).In this study,a Py@Co-MOF composite material based on pyrene(Py)molecules and{[Co2(BINDI)(DMA)_(2)]·DMA}_(n)(Co-MOF,H4BINDI=N,N'-bis(5-isophthalic acid)naphthalenediimide,DMA=N,N-dimethylacetamide)was synthesized via a one-pot method,leveragingπ-πinteractions between pyrene and Co-MOF to modulate electrical conductivity.Results demonstrate that the Py@Co-MOF catalyst exhibited significantly enhanced OER performance compared to pure Co-MOF or pyrene-based electrodes,achieving an overpotential of 246 mV at a current density of 10 mA·cm^(-2) along with excellent stability.Density functional theory(DFT)calculations reveal that the formation of O*in the second step is the rate-determining step(RDS)during the OER process on Co-MOF,with an energy barrier of 0.85 eV due to the weak adsorption affinity of the OH*intermediate for Co sites.CCDC:2419276.展开更多
A gradient structure was introduced into a metal laminated target plate,and the anti-penetration simulation of the gradient structure was compared with that of a uniform-layer-thickness target plate by finite element ...A gradient structure was introduced into a metal laminated target plate,and the anti-penetration simulation of the gradient structure was compared with that of a uniform-layer-thickness target plate by finite element simulation.The analysis was verified by an impact experiment.Results show that the high-level thickness and appropriate percentage of Ti alloy at the upper side of the gradient structure provide greater impact resistance against the bullet,which increases the warhead breakage and enhances the anti-penetration performance.In addition,during the impact process,the stress is transmitted and reflected in the form of waves in each layer of the target plate,and the interaction between the compression and tension waves causes non-synergistic deformation of the target plate and leads to delamination.The gradient target plate takes penetration resistance a step further through the higher energy absorption rate and more consumption of the bullet kinetic energy.This research provides a theoretical basis for the application of gradient structures in metallic laminated armor.展开更多
Graphene/copper-based composite heat sinks demonstrate extensive application potential in military equipment thermal management,high-power electronic packaging,new energy vehicles,and 5G communication systems,due to t...Graphene/copper-based composite heat sinks demonstrate extensive application potential in military equipment thermal management,high-power electronic packaging,new energy vehicles,and 5G communication systems,due to their outstanding properties,including high thermal conductivity,tunable thermal expansion coefficients,excellent mechanical strength,and low density.However,the industrial-scale application of these composites faces critical challenges during the fabrication of components with complex structures,such as inhomogeneous dispersion of graphene within the copper matrix and poor interfacial bonding between the two phases,which substantially undermine the overall performance of graphene/copper-based composites.To address these issues,the preparation methods for graphene/copper-based composite heat sinks were reviewed.For each method,a rigorous analysis was presented to clarify its inherent advantages and unavoidable restrictions.Furthermore,the latest research progress in addressing three core scientific challenges was synthesized,including uniform dispersion of graphene,interfacial optimization mechanisms,and molecular dynamics simulations for elucidating the structure-property relationships.Finally,the future development directions of graphene/copper-based composite heat sinks in engineering applications were prospected.展开更多
Copper manufactured by laser powder bed fusion(LPBF)process typically exhibits poor strength-ductility coordination,and the addition of strengthening phases is an effective way to address this issue.To explore the eff...Copper manufactured by laser powder bed fusion(LPBF)process typically exhibits poor strength-ductility coordination,and the addition of strengthening phases is an effective way to address this issue.To explore the effects of strengthening phases on Cu,Cu-carbon nanotubes(CNTs)composites were prepared using LPBF technique with Cu-CNTs mixed powder as the matrix.The formability,microstructure,mechanical properties,electrical conductivity,and thermal properties were studied.The result shows that the prepared composites have high relative density.The addition of CNTs results in inhomogeneous equiaxed grains at the edges of the molten pool and columnar grains at the center.Compared with pure copper,the overall mechanical properties of the composite are improved:tensile strength increases by 52.8%and elongation increases by 146.4%;the electrical and thermal properties are also enhanced:thermal conductivity increases by 10.8%and electrical conductivity increases by 12.7%.展开更多
The TiB+TiC dual-reinforced B_(4)C/TC4 composite was in-situ fabricated via incorporating 0.5wt%B_(4)C reinforcement during the laser melting deposition process.Different heat treatments of annealing and solid solutio...The TiB+TiC dual-reinforced B_(4)C/TC4 composite was in-situ fabricated via incorporating 0.5wt%B_(4)C reinforcement during the laser melting deposition process.Different heat treatments of annealing and solid solution were used to regulate the microstructure,mechanical properties,and corrosion properties of B_(4)C/TC4 composite.Results show that with the increase in temperature from 500℃to 800°C,partial lamellarα-Ti in the as-deposited sample is gradually transformed into equiaxedα-Ti,accompanied by the disappearance of basketweave microstructure.At 1100°C,a small portion of TiC phase suffers fusion.This composite exhibits the optimal combination of strength and plasticity after annealing at 500℃for 4 h followed by furnace cooling,which is attributed to the stress release effect and the refined basketweave microstructure.However,this composite shows a decline in corrosion resistance after various heat treatments due to grain coarsening and micro-galvanic corrosion.展开更多
In this study,using 3,5‑di(3′,5′‑dicarboxylphenyl)‑1H‑1,2,4‑triazole(H4L)as ligands,a gadolinia‑based organic framework complex{[GdNa(L)(H_(2)O)3]·2H_(2)O}_(n)(Gd‑Na‑MOF)was successfully designed and synthesize...In this study,using 3,5‑di(3′,5′‑dicarboxylphenyl)‑1H‑1,2,4‑triazole(H4L)as ligands,a gadolinia‑based organic framework complex{[GdNa(L)(H_(2)O)3]·2H_(2)O}_(n)(Gd‑Na‑MOF)was successfully designed and synthesized by hydrothermal method.The structure and properties were systematically characterized and tested by techniques such as single‑crystal X‑ray diffraction,powder X‑ray diffraction,thermogravimetric analysis,infrared spectroscopy,and fluorescence spectroscopy.The results indicate that this complex has a unique 3D structure,excellent thermal stability,and outstanding luminescent performance.Based on its luminescent properties,a polymer‑embedding method was employed to fabricate the Gd‑Na‑MOF into a flexible,washable composite fluorescent film,Gd‑Na‑MOF@PMMA/BMA(PMMA=polymethyl methacrylate,BMA=butyl methacrylate).This fluorescent film exhibited highly sensitive recognition capability for tyramine,with a low detection limit of 1.66μmol·L^(-1).It was used for the detection of tyramine in bananas,with a recovery rate of 96.92%‑100.26%.CCDC:2466949.展开更多
The escalating pace of industrialization has significantly intensified water pollution challenges,for instance,the persistent organic pollutants like methyl orange(MO).Conventional remediation techniques,such as adsor...The escalating pace of industrialization has significantly intensified water pollution challenges,for instance,the persistent organic pollutants like methyl orange(MO).Conventional remediation techniques,such as adsorption and biological degradation,are often hampered by low efficiency and the risk of secondary pollution.Photocatalysis emerges as a promising sustainable alternative;however,the benchmark material titanium dioxide(TiO_(2))suffers from its intrinsic limitations,notably its wide bandgap energy(≥3.4 eV)restricting its activity to the region of the ultraviolet light and its rapid recombination of photogenerated charge carriers.To overcome these constraints,this research focused on synthesizing novel TiO_(2)/Sn_(3)O_(4) heterojunction composite photocatalysts via a solvothermal approach.Comprehensive characterization techniques confirmed the successful formation of the composite,which revealed that ultrathin Sn3O4 nanosheets uniformly coated TiO_(2) nanospheres.This unique architecture effectively reduced the overall crystallinity and introduced the beneficial oxygen vacancies.Under visible-light irradiation(λ≥420 nm),the optimized TiO_(2)/Sn3O4 composite exhibited the exceptional photocatalytic performance,which achieved 96%degradation of MO within just 60 minutes.The calculated apparent kinetic rate constant(0.103 min^(-1))was remarkably(5.15 times)higher than that of pristine TiO_(2).ESR experiments identified that hydroxyl radicals(·OH)was the predominant active species driving the degradation.Furthermore,cyclic degradation tests demonstrated its excellent material stability,with the composite retaining 85%of its initial efficiency after four consecutive reuse cycles.This work underscored the synergistic effects within the TiO_(2)/Sn_(3)O_(4) heterojunction,which significantly enhanced the visible-light absorption,charge separation,and photocatalytic activity,which provided the valuable insights for designing efficient,stable catalysts for the advanced environmental remediation applications.展开更多
This study presents the successful synthesis of a novel Z-scheme heterojunction composite film consisting of Ag/Bi_(2)MoO_(6)/BiOBr through electrochemical processes and ionexchange techniques,followed by the photodep...This study presents the successful synthesis of a novel Z-scheme heterojunction composite film consisting of Ag/Bi_(2)MoO_(6)/BiOBr through electrochemical processes and ionexchange techniques,followed by the photodeposition of noble metal silver(Ag)onto the composite structure.The catalytic efficiency of semiconductor photocatalysts is greatly improved by utilizing the localized surface plasmon resonance(LSPR)effect observed in Ag nanoparticles(NPs).Furthermore,the noble metal Ag serves as an intermediary bridge facilitating charge transfer between Bi_(2)MoO_(6)and BiOBr,while the formation of a Schottky barrier effectively inhibits the recombination of photo-generated electron-hole pairs.As a result,the Ag-deposited Bi_(2)MoO_(6)/BiOBr film exhibits superior photocatalytic performance in the reduction of CO_(2)compared to its unmodified counterpart.Our experimental results indicate a non-linear relationship between Ag deposition and the efficiency of photocatalytic CO_(2)reduction to CO,characterized by an initial increase in efficiency followed by a decline.The optimized 1.5%-Ag/Bi_(2)MoO_(6)/BiOBr film demonstrates exceptional photocatalytic activity,attaining a CO production rate of 13.65μmol/(g·h).This research explores the fundamental mechanisms that lead to improved photocatalytic CO_(2)reduction capabilities of the Ag/Bi_(2)MoO_(6)/BiOBr film.Our research offers important perspectives for the thoughtful design and production of highly efficient photocatalysts,which are essential for advancing sustainable energy solutions.展开更多
Traditional dynamic analysis of mechanical structures,often limited to individual beams or plates,fails to fully capture their dynamic behaviors.In systems where space and mass are constrained,such as the battery supp...Traditional dynamic analysis of mechanical structures,often limited to individual beams or plates,fails to fully capture their dynamic behaviors.In systems where space and mass are constrained,such as the battery support structures in electric aircraft,conventional absorbers and isolators are insufficient for effective vibration control.This study simplifies the battery support structure of electric aircraft as an integrated composite beam consisting of three interconnected beams,and investigated its structural dynamics properties and nonlinear vibration control under thermal conditions caused by battery heat.The nonlinear vibration control is performed using the Nitinol steel wire ropes(Ni Ti-ST),with nonlinear damping properties.The natural frequencies of system are determined using the Rayleigh-Ritz technique.Theoretical results are validated through both Finite Element Method(FEM)and hammer tests.Moreover,the dynamic equations are derived using the Lagrange method and discretized via the Galerkin Truncation Method(GTM).The Harmonic Balance Method(HBM)is used to evaluate the vibration responses of the integrated model,with further verification through the Runge-Kutta Method(RKM).The experiments are conducted to corroborate the theoretical analysis.The results show that the system frequency changes in stages with the increase of the stiffness of the integrated composite beam connection.Especially in the case of varying environments,as the temperature increases,the frequency of system will first increase to a certain maximum value and then gradually decrease.Furthermore,the NiTi-ST effectively reduces vibration in the integrated composite beam,particularly under varying temperatures and external excitations.展开更多
A novel macroparticle magnesium-modified biochar/yttrium alginate(Mg-BC/SA-Y)hybrid biogel composite was successfully developed through a facile solution reaction of magnesium-modified BC and yttrium alginate polymer,...A novel macroparticle magnesium-modified biochar/yttrium alginate(Mg-BC/SA-Y)hybrid biogel composite was successfully developed through a facile solution reaction of magnesium-modified BC and yttrium alginate polymer,and its properties were characterized.The obtained Mg-BC/SA-Y biogel beads have a particle size of approximately 1.5 mm,featuring abundant network pores and an uneven,distinctive surface.The performance and mechanisms of Mg-BC/SA-Y for phosphate adsorption were thoroughly investigated.The findings indicate that Mg-BC/SA-Y removes up to 95.7%of phosphate at pH4.0 and 298 K,and also achieves a phosphate removal efficiency of over 80%within a pH range of3.0-11.0.The adsorption capacity of Mg-BC/SA-Y for phosphate is nearly four times that of BC.The spontaneous adsorption processes and endothermic adsorption behavior can be elucidated by the pseudo-second-order rate and Langmuir equations,respectively.Phosphate adsorption is almost unaffected by water ionic strength and common coexisting ions,except for the influence of highconcentration F-ions.The recyclable biogel beads can be reused after adsorbing phosphate,and represent excellent stability and practicability in real water.The mechanisms of ligand exchange,innersphere complexation and electrostatic attraction are involved in phosphate removal.Mg-BC/SA-Y biogel polymer is a desirable and sustainable biosorbent for treating water with excessive phosphate levels and reducing pollution and carbon emissions.展开更多
We mixed Bacillus subtilis and brewing yeast to prepare composite microbial self-healing materials,and studied the self-healing effect of composite microorganisms in mortar cracks of different widths and cracking ages...We mixed Bacillus subtilis and brewing yeast to prepare composite microbial self-healing materials,and studied the self-healing effect of composite microorganisms in mortar cracks of different widths and cracking ages.The experimental results show that the performance and self-healing effect of composite micro-organisms are significantly better than those of single microorganisms.For cracks with widths of 0.2-0.4 mm,the repair effect of the composite microorganisms at 28 days is 42.7%and 71.2%higher than that of pure Bacillus and pure yeast,respectively.The repairing rate of the area with the widths of the cracks of 0.2-0.4,0.4-0.6,and 0.6-0.8 mm are 100%,77.3%,and 53.4%,respectively.The area repair rates corresponding to cracking ages of 56,90,and 180 days are 73.3%,55.4%,and 30.8%,respectively.展开更多
A new,cost-effective porous polymer composite was developed by reinforcing polypropylene(PP)with cenosphere particles.This study investigates how the composite’s dielectric properties are affected by their porosity.D...A new,cost-effective porous polymer composite was developed by reinforcing polypropylene(PP)with cenosphere particles.This study investigates how the composite’s dielectric properties are affected by their porosity.Dielectric constant(ε′)measurements were taken over a range of frequencies at roomtemperature.A theoreticalmodel was developed to explain the electrical conductivity of the porous PP/cenosphere composites.The study thoroughly examined how the inclusion of cenosphere particles influenced key electrical parameters,including dielectric constant,dissipation factor(tanδ),DC(direct current)conductivity,and AC(alternating current)conductivity.The results revealed that increasing the cenosphere content caused a decrease in the dielectric constant,while the dissipation factor increased.The developed porous PP/cenosphere composite exhibits a unique balance of low dielectric constant,lightweight structure making it suitable for several practical applications.Its low dielectric constant and reduced DC conductivity make it an excellent candidate for electronic packaging,insulating layers,and high-frequency components,where minimal energy loss and signal interference are required.The lightweight nature of the cenosphere-reinforced structure also suggests potential use in aerospace and automotive industries for lightweight insulation panels or structural components.Furthermore,its cost-effectiveness and tunable porosity could enable applications in microwave substrates,radar-absorbing materials,and energy-efficient building materials where dielectric control and weight reduction are critical.Additionally,DC conductivity was found to decline with higher cenosphere concentrations.The theoretical model was in good agreement with the experimental data.展开更多
基金supported by the National Natural Science Foundation of China(Nos.61303264,61202482,and 61202488)Guangxi Cooperative Innovation Center of Cloud Computing and Big Data(No.YD16505)Distinguished Young Scientist Promotion of National University of Defense Technology
文摘We consider a wide range of non-convex regularized minimization problems, where the non-convex regularization term is composite with a linear function engaged in sparse learning. Recent theoretical investigations have demonstrated their superiority over their convex counterparts. The computational challenge lies in the fact that the proximal mapping associated with non-convex regularization is not easily obtained due to the imposed linear composition. Fortunately, the problem structure allows one to introduce an auxiliary variable and reformulate it as an optimization problem with linear constraints, which can be solved using the Linearized Alternating Direction Method of Multipliers （LADMM）. Despite the success of LADMM in practice, it remains unknown whether LADMM is convergent in solving such non-convex compositely regularized optimizations. In this research, we first present a detailed convergence analysis of the LADMM algorithm for solving a non-convex compositely regularized optimization problem with a large class of non-convex penalties. Furthermore, we propose an Adaptive LADMM （AdaLADMM） algorithm with a line-search criterion. Experimental results on different genres of datasets validate the efficacy of the proposed algorithm.
基金supported by the National Science Foundation for Distinguished Young Scholars of China(No.52325506)the Fundamental Research Funds for the Central Universities(No.DUT22LAB501)。
文摘Ultrasonic-Assisted Grinding(UAG)is a novel manufacturing technology that shows promising promise for use in processing Ceramic Matrix Composites(CMCs).Nevertheless,analyzing the material removal process of CMCs with multidirectional structure during UAG is challenging,impeding the progress and improvement of the UAG process.This work examined the impact of ultrasonic vibration on the dynamic mechanical characteristics during processing.Additionally,we experimentally elucidated the material removal mechanism of CMCs during the scratching process under the influence of vertical vibration.The results indicate that the introduction of ultrasonic vibration causes a strain rate effect,resulting in a modification of the material removal mechanism,subsequently impacting the processing quality.Ultrasonic vibration increases the dynamic strength and brittleness of the fibers in CMCs,leading to more cracks at fracture,which changes from the original bending fracture to shear fracture.In addition,ultrasonic vibration can effectively inhibit the impact of scratching depth and anisotropy on the removal mechanism of CMCs,resulting in a more uniform surface of CMCs after processing.
基金Supported by the National Natural Science Foundation of China(Nos.52293472,22473096 and 22471164)。
文摘Among various architectures of polymers,end-group-free rings have attracted growing interests due to their distinct physicochemical performances over the linear counterparts which are exemplified by reduced hydrodynamic size and slower degradation.It is key to develop facile methods to large-scale synthesis of polymer rings with tunable compositions and microstructures.Recent progresses in large-scale synthesis of polymer rings against single-chain dynamic nanoparticles,and the example applications in synchronous enhancing toughness and strength of polymer nanocomposites are summarized.Once there is the breakthrough in rational design and effective large-scale synthesis of polymer rings and their functional derivatives,a family of cyclic functional hybrids would be available,thus providing a new paradigm in developing polymer science and engineering.
基金supported by the Natural Science Foundation of Shanxi Province(202203021212205)Shanxi Province Major Science and Technology Special Project‘Jiebang Guashuai’Project(202101120401008)+1 种基金National Natural Science Foundation of China(52371231)Key R&D Program of Shanxi Province(202302040201008).
文摘With the rapid development of modern electronic technology,the demand for high-performance microwave absorption materials has increased dramatically.In order to meet this demand,the electrospinning of FeNiCo/carbon nanofiber(FeNiCo/CNF)composites with excellent microwave absorption properties was developed,and their potential as high frequency microwave absorption materials was evaluated.Experiment showed that FeNiCo/CNFs achieve a minimum reflection loss(RL_(min))of−55.5 dB with a matching thickness of only 1.6 mm.Microstructure analysis and electromagnetic parameter testing showed that the excellent microwave absorbing properties were mainly due to the combined effect of the network structure of carbon nanofibers and the FeNiCo alloy.This interaction promotes multiple reflections and the efficient absorption of microwaves.Computer simulation also showed that the FeNiCo/CNF composites produce an excellent radar cross-section reduction in typical radar operating frequency bands,which validates their potential application in stealth technology.This is a new concept in the development of high-performance microwave absorption materials.
基金Supported by the Autonomous Research Project of SKLCC(2024BWZ003)Strategic Priority Research Program of the Chinese Academy of Sciences(XDA0390401)the Doctoral Research Start-up Funding of Shanxi Institute of Technology(026012).
文摘KIT-5/Beta composite supports were synthesized using an in situ self-assembly hydrothermal method,and NiW/KIT-5/Beta catalysts were prepared by impregnation.A series of characterization techniques were utilized to evaluate the influence of varying hydrothermal synthesis temperatures on the physicochemical properties of both the KIT-5/Beta supports and the resulting catalysts.The catalytic performances of catalysts were evaluated under reaction conditions of 320℃,4 MPa H_(2)pressure,and a weight hourly space velocity(WHSV)of 4.8 h^(-1)for hydrodenitrogenation(HDN)of quinoline.The results indicated that the specific surface area and pore structure of the materials could be effectively regulated by adjusting the hydrothermal synthesis temperature,which in turn influenced the number of active sites on the catalyst.The NiW/KB-125 catalyst,synthesized at 125℃,presented the highest quinoline HDN efficiency(96.8%),which can be attributed to its favorable pore channel structure,greater Brønsted acid number,higher degree of metal sulfidation(80.12%)and appropriate metal-support interaction(MSI).
基金National Natural Science Foundation of China(52272075,52472053)Research Fund of Youth Innovation Promotion Association of CAS,China(2021190)Defense Industrial Technology Development Program(JCKY2021130B007)。
文摘Carbon fiber-reinforced carbon aerogel(C/CA)composites are one of the most promising candidates for applications requiring both thermal insulation and load bearing capabilities.The preparation of anti-oxidation coatings on C/CA to address its susceptibility to oxidation is a feasible approach to promote its application in oxidative environments.However,the currently reported coatings on C/CA mainly focus on improving the ablation performance and coating preparation process typically necessitating high-temperature heat treatment.This procedure can increase its thermal conductivity and reduce its thermal insulation ability.In this study,a series of ceramic-resin coatings were fabricated on C/CA through a simple slurry brushing-drying approach at room temperature.The effects of phenolic resin content on the coating structure,residual stress,thermal shock,and oxidation behaviors were investigated.Due to the adhesive properties and curing-induced shrinkage,the PR-7.5 coating(containing 7.5%(in mass)phenolic resin in the slurry)exhibits bonding strength close to fracture strength of the substrate and residual compressive stress of 0.853 GPa,which is beneficial for resisting thermal shock cracking.However,excessive resin content(PR-10.0 containing 10.0%(in mass)phenolic resin in the slurry)induces tensile stress due to uneven curing shrinkage,thereby leading to thermal shock cracking.Meanwhile,oxidation tests reveal significantly reduced weight losses for PR-7.5(17.46%at 800℃/100 min,8.15%at 1000℃/120 min,3.15%at 1200℃/120 min)versus uncoated C/CA’s 44.60%loss at 800℃/20 min.This work provides a brand-new and simple approach to improving the anti-oxidation performance of C/CA and expands its application in mild oxidative environments.
文摘A composite electrocatalyst,CoMoNiO-S/NF-110(NF is nickel foam),was synthesized through electrodeposition,followed by pyrolysis and then the vulcanization process.CoMoNiO-S/NF-110 exhibited a structure where Ni3S2 and Mo2S3 nanoparticles were integrated at the edges of Co3O4 nanosheets,creating a rich,heterogeneous interface that enhances the synergistic effects of each component.In an alkaline electrolyte,the synthesized CoMoNiO-S/NF-110 exhibited superior electrocatalytic performance for oxygen evolution reaction(OER),achieving current densities of 100 and 200 mA·cm^(-2) with low overpotentials of 199.4 and 224.4 mV,respectively,outperforming RuO2 and several high-performance Mo and Ni-based catalysts.This excellent performance is attributed to the rich interface formed between the components and active sites exposed by the defect structure.
文摘The poor electrical conductivity of metal-organic frameworks(MOFs)limits their electrocatalytic performance in the oxygen evolution reaction(OER).In this study,a Py@Co-MOF composite material based on pyrene(Py)molecules and{[Co2(BINDI)(DMA)_(2)]·DMA}_(n)(Co-MOF,H4BINDI=N,N'-bis(5-isophthalic acid)naphthalenediimide,DMA=N,N-dimethylacetamide)was synthesized via a one-pot method,leveragingπ-πinteractions between pyrene and Co-MOF to modulate electrical conductivity.Results demonstrate that the Py@Co-MOF catalyst exhibited significantly enhanced OER performance compared to pure Co-MOF or pyrene-based electrodes,achieving an overpotential of 246 mV at a current density of 10 mA·cm^(-2) along with excellent stability.Density functional theory(DFT)calculations reveal that the formation of O*in the second step is the rate-determining step(RDS)during the OER process on Co-MOF,with an energy barrier of 0.85 eV due to the weak adsorption affinity of the OH*intermediate for Co sites.CCDC:2419276.
基金National Defense Basic Scientific Research Program of China(JCKY2020408B002,WDZC2022-12)Key Research and Development Program of Shanxi Province(202102050201011,202202050201014)Fundamental Research Program of Shanxi Province(20210302124178,20210302123061,202103021224183)。
文摘A gradient structure was introduced into a metal laminated target plate,and the anti-penetration simulation of the gradient structure was compared with that of a uniform-layer-thickness target plate by finite element simulation.The analysis was verified by an impact experiment.Results show that the high-level thickness and appropriate percentage of Ti alloy at the upper side of the gradient structure provide greater impact resistance against the bullet,which increases the warhead breakage and enhances the anti-penetration performance.In addition,during the impact process,the stress is transmitted and reflected in the form of waves in each layer of the target plate,and the interaction between the compression and tension waves causes non-synergistic deformation of the target plate and leads to delamination.The gradient target plate takes penetration resistance a step further through the higher energy absorption rate and more consumption of the bullet kinetic energy.This research provides a theoretical basis for the application of gradient structures in metallic laminated armor.
基金Research Start-Up Fund Project of Anhui Polytechnic University(S022023017)University Research Project of Anhui Province(2023AH050937)+1 种基金Anhui Polytechnic University Research Foundation for Introducing Talents(2022YQQ003)Anhui Province Key Laboratory of Intelligent Vehicle Chassis by Wire。
文摘Graphene/copper-based composite heat sinks demonstrate extensive application potential in military equipment thermal management,high-power electronic packaging,new energy vehicles,and 5G communication systems,due to their outstanding properties,including high thermal conductivity,tunable thermal expansion coefficients,excellent mechanical strength,and low density.However,the industrial-scale application of these composites faces critical challenges during the fabrication of components with complex structures,such as inhomogeneous dispersion of graphene within the copper matrix and poor interfacial bonding between the two phases,which substantially undermine the overall performance of graphene/copper-based composites.To address these issues,the preparation methods for graphene/copper-based composite heat sinks were reviewed.For each method,a rigorous analysis was presented to clarify its inherent advantages and unavoidable restrictions.Furthermore,the latest research progress in addressing three core scientific challenges was synthesized,including uniform dispersion of graphene,interfacial optimization mechanisms,and molecular dynamics simulations for elucidating the structure-property relationships.Finally,the future development directions of graphene/copper-based composite heat sinks in engineering applications were prospected.
基金National Key Research and Development Program of China(2023YFB4606400)Supported by Longmen Laboratory Frontier Exploration Topics(LMQYTSKT003)。
文摘Copper manufactured by laser powder bed fusion(LPBF)process typically exhibits poor strength-ductility coordination,and the addition of strengthening phases is an effective way to address this issue.To explore the effects of strengthening phases on Cu,Cu-carbon nanotubes(CNTs)composites were prepared using LPBF technique with Cu-CNTs mixed powder as the matrix.The formability,microstructure,mechanical properties,electrical conductivity,and thermal properties were studied.The result shows that the prepared composites have high relative density.The addition of CNTs results in inhomogeneous equiaxed grains at the edges of the molten pool and columnar grains at the center.Compared with pure copper,the overall mechanical properties of the composite are improved:tensile strength increases by 52.8%and elongation increases by 146.4%;the electrical and thermal properties are also enhanced:thermal conductivity increases by 10.8%and electrical conductivity increases by 12.7%.
基金Tianjin Municipal Natural Science Foundation(23JCYBJC00040)National Natural Science Foundation of China(52175369)。
文摘The TiB+TiC dual-reinforced B_(4)C/TC4 composite was in-situ fabricated via incorporating 0.5wt%B_(4)C reinforcement during the laser melting deposition process.Different heat treatments of annealing and solid solution were used to regulate the microstructure,mechanical properties,and corrosion properties of B_(4)C/TC4 composite.Results show that with the increase in temperature from 500℃to 800°C,partial lamellarα-Ti in the as-deposited sample is gradually transformed into equiaxedα-Ti,accompanied by the disappearance of basketweave microstructure.At 1100°C,a small portion of TiC phase suffers fusion.This composite exhibits the optimal combination of strength and plasticity after annealing at 500℃for 4 h followed by furnace cooling,which is attributed to the stress release effect and the refined basketweave microstructure.However,this composite shows a decline in corrosion resistance after various heat treatments due to grain coarsening and micro-galvanic corrosion.
文摘In this study,using 3,5‑di(3′,5′‑dicarboxylphenyl)‑1H‑1,2,4‑triazole(H4L)as ligands,a gadolinia‑based organic framework complex{[GdNa(L)(H_(2)O)3]·2H_(2)O}_(n)(Gd‑Na‑MOF)was successfully designed and synthesized by hydrothermal method.The structure and properties were systematically characterized and tested by techniques such as single‑crystal X‑ray diffraction,powder X‑ray diffraction,thermogravimetric analysis,infrared spectroscopy,and fluorescence spectroscopy.The results indicate that this complex has a unique 3D structure,excellent thermal stability,and outstanding luminescent performance.Based on its luminescent properties,a polymer‑embedding method was employed to fabricate the Gd‑Na‑MOF into a flexible,washable composite fluorescent film,Gd‑Na‑MOF@PMMA/BMA(PMMA=polymethyl methacrylate,BMA=butyl methacrylate).This fluorescent film exhibited highly sensitive recognition capability for tyramine,with a low detection limit of 1.66μmol·L^(-1).It was used for the detection of tyramine in bananas,with a recovery rate of 96.92%‑100.26%.CCDC:2466949.
文摘The escalating pace of industrialization has significantly intensified water pollution challenges,for instance,the persistent organic pollutants like methyl orange(MO).Conventional remediation techniques,such as adsorption and biological degradation,are often hampered by low efficiency and the risk of secondary pollution.Photocatalysis emerges as a promising sustainable alternative;however,the benchmark material titanium dioxide(TiO_(2))suffers from its intrinsic limitations,notably its wide bandgap energy(≥3.4 eV)restricting its activity to the region of the ultraviolet light and its rapid recombination of photogenerated charge carriers.To overcome these constraints,this research focused on synthesizing novel TiO_(2)/Sn_(3)O_(4) heterojunction composite photocatalysts via a solvothermal approach.Comprehensive characterization techniques confirmed the successful formation of the composite,which revealed that ultrathin Sn3O4 nanosheets uniformly coated TiO_(2) nanospheres.This unique architecture effectively reduced the overall crystallinity and introduced the beneficial oxygen vacancies.Under visible-light irradiation(λ≥420 nm),the optimized TiO_(2)/Sn3O4 composite exhibited the exceptional photocatalytic performance,which achieved 96%degradation of MO within just 60 minutes.The calculated apparent kinetic rate constant(0.103 min^(-1))was remarkably(5.15 times)higher than that of pristine TiO_(2).ESR experiments identified that hydroxyl radicals(·OH)was the predominant active species driving the degradation.Furthermore,cyclic degradation tests demonstrated its excellent material stability,with the composite retaining 85%of its initial efficiency after four consecutive reuse cycles.This work underscored the synergistic effects within the TiO_(2)/Sn_(3)O_(4) heterojunction,which significantly enhanced the visible-light absorption,charge separation,and photocatalytic activity,which provided the valuable insights for designing efficient,stable catalysts for the advanced environmental remediation applications.
基金Supported by the National Natural Science Foundation of China(21978196)Natural Science Foundation of Shanxi Province(201801D211008,202403021211018)+1 种基金Shanxi Provincial Education Department(S202413597023)Jincheng High Efficiency Conversion and Utilization Technology Innovation Center of CO2 Energy and Biomass Energy。
文摘This study presents the successful synthesis of a novel Z-scheme heterojunction composite film consisting of Ag/Bi_(2)MoO_(6)/BiOBr through electrochemical processes and ionexchange techniques,followed by the photodeposition of noble metal silver(Ag)onto the composite structure.The catalytic efficiency of semiconductor photocatalysts is greatly improved by utilizing the localized surface plasmon resonance(LSPR)effect observed in Ag nanoparticles(NPs).Furthermore,the noble metal Ag serves as an intermediary bridge facilitating charge transfer between Bi_(2)MoO_(6)and BiOBr,while the formation of a Schottky barrier effectively inhibits the recombination of photo-generated electron-hole pairs.As a result,the Ag-deposited Bi_(2)MoO_(6)/BiOBr film exhibits superior photocatalytic performance in the reduction of CO_(2)compared to its unmodified counterpart.Our experimental results indicate a non-linear relationship between Ag deposition and the efficiency of photocatalytic CO_(2)reduction to CO,characterized by an initial increase in efficiency followed by a decline.The optimized 1.5%-Ag/Bi_(2)MoO_(6)/BiOBr film demonstrates exceptional photocatalytic activity,attaining a CO production rate of 13.65μmol/(g·h).This research explores the fundamental mechanisms that lead to improved photocatalytic CO_(2)reduction capabilities of the Ag/Bi_(2)MoO_(6)/BiOBr film.Our research offers important perspectives for the thoughtful design and production of highly efficient photocatalysts,which are essential for advancing sustainable energy solutions.
基金supported by the National Natural Science Foundation of China(No.12272240)the Liaoning Revitalization Talents Program,China(No.XLYC2203197)。
文摘Traditional dynamic analysis of mechanical structures,often limited to individual beams or plates,fails to fully capture their dynamic behaviors.In systems where space and mass are constrained,such as the battery support structures in electric aircraft,conventional absorbers and isolators are insufficient for effective vibration control.This study simplifies the battery support structure of electric aircraft as an integrated composite beam consisting of three interconnected beams,and investigated its structural dynamics properties and nonlinear vibration control under thermal conditions caused by battery heat.The nonlinear vibration control is performed using the Nitinol steel wire ropes(Ni Ti-ST),with nonlinear damping properties.The natural frequencies of system are determined using the Rayleigh-Ritz technique.Theoretical results are validated through both Finite Element Method(FEM)and hammer tests.Moreover,the dynamic equations are derived using the Lagrange method and discretized via the Galerkin Truncation Method(GTM).The Harmonic Balance Method(HBM)is used to evaluate the vibration responses of the integrated model,with further verification through the Runge-Kutta Method(RKM).The experiments are conducted to corroborate the theoretical analysis.The results show that the system frequency changes in stages with the increase of the stiffness of the integrated composite beam connection.Especially in the case of varying environments,as the temperature increases,the frequency of system will first increase to a certain maximum value and then gradually decrease.Furthermore,the NiTi-ST effectively reduces vibration in the integrated composite beam,particularly under varying temperatures and external excitations.
基金Project supported by the National Natural Science Foundation of China(21167011)the Natural Science Foundation of Inner Mongolia Autonomous Region,China(2020LH02009)the Collaborative Innovation Center for Water Environment Security of Inner Mongolia Autonomous Region,China(XTCX003)。
文摘A novel macroparticle magnesium-modified biochar/yttrium alginate(Mg-BC/SA-Y)hybrid biogel composite was successfully developed through a facile solution reaction of magnesium-modified BC and yttrium alginate polymer,and its properties were characterized.The obtained Mg-BC/SA-Y biogel beads have a particle size of approximately 1.5 mm,featuring abundant network pores and an uneven,distinctive surface.The performance and mechanisms of Mg-BC/SA-Y for phosphate adsorption were thoroughly investigated.The findings indicate that Mg-BC/SA-Y removes up to 95.7%of phosphate at pH4.0 and 298 K,and also achieves a phosphate removal efficiency of over 80%within a pH range of3.0-11.0.The adsorption capacity of Mg-BC/SA-Y for phosphate is nearly four times that of BC.The spontaneous adsorption processes and endothermic adsorption behavior can be elucidated by the pseudo-second-order rate and Langmuir equations,respectively.Phosphate adsorption is almost unaffected by water ionic strength and common coexisting ions,except for the influence of highconcentration F-ions.The recyclable biogel beads can be reused after adsorbing phosphate,and represent excellent stability and practicability in real water.The mechanisms of ligand exchange,innersphere complexation and electrostatic attraction are involved in phosphate removal.Mg-BC/SA-Y biogel polymer is a desirable and sustainable biosorbent for treating water with excessive phosphate levels and reducing pollution and carbon emissions.
基金Funded by the National Key R&D Program of China(No.2023YFC3806100)the National Nature Science Foundation of China(No.52278269,52278268)+2 种基金the Tianjin Outstanding Young Scholars Science Fund Project(No.22JCJQJC00020)the Key Project of Tianjin Natural Science Foundation(No.23JCZDJC00430)the Joint Research Center of China and Foreign Countries Special Fund of Tianjin Innovation Platform(No.24PTLYHZ00240)。
文摘We mixed Bacillus subtilis and brewing yeast to prepare composite microbial self-healing materials,and studied the self-healing effect of composite microorganisms in mortar cracks of different widths and cracking ages.The experimental results show that the performance and self-healing effect of composite micro-organisms are significantly better than those of single microorganisms.For cracks with widths of 0.2-0.4 mm,the repair effect of the composite microorganisms at 28 days is 42.7%and 71.2%higher than that of pure Bacillus and pure yeast,respectively.The repairing rate of the area with the widths of the cracks of 0.2-0.4,0.4-0.6,and 0.6-0.8 mm are 100%,77.3%,and 53.4%,respectively.The area repair rates corresponding to cracking ages of 56,90,and 180 days are 73.3%,55.4%,and 30.8%,respectively.
文摘A new,cost-effective porous polymer composite was developed by reinforcing polypropylene(PP)with cenosphere particles.This study investigates how the composite’s dielectric properties are affected by their porosity.Dielectric constant(ε′)measurements were taken over a range of frequencies at roomtemperature.A theoreticalmodel was developed to explain the electrical conductivity of the porous PP/cenosphere composites.The study thoroughly examined how the inclusion of cenosphere particles influenced key electrical parameters,including dielectric constant,dissipation factor(tanδ),DC(direct current)conductivity,and AC(alternating current)conductivity.The results revealed that increasing the cenosphere content caused a decrease in the dielectric constant,while the dissipation factor increased.The developed porous PP/cenosphere composite exhibits a unique balance of low dielectric constant,lightweight structure making it suitable for several practical applications.Its low dielectric constant and reduced DC conductivity make it an excellent candidate for electronic packaging,insulating layers,and high-frequency components,where minimal energy loss and signal interference are required.The lightweight nature of the cenosphere-reinforced structure also suggests potential use in aerospace and automotive industries for lightweight insulation panels or structural components.Furthermore,its cost-effectiveness and tunable porosity could enable applications in microwave substrates,radar-absorbing materials,and energy-efficient building materials where dielectric control and weight reduction are critical.Additionally,DC conductivity was found to decline with higher cenosphere concentrations.The theoretical model was in good agreement with the experimental data.
