In this paper the Expendable Pattern Casting with dry sand Vacuum(EPC-V) process is used to manufacture iron matrix composites with tungsten carbide particle.Microstructures of the composites layers were analyzed.The ...In this paper the Expendable Pattern Casting with dry sand Vacuum(EPC-V) process is used to manufacture iron matrix composites with tungsten carbide particle.Microstructures of the composites layers were analyzed.The abrasive wear resistance of the composites layers were tested and compared with that of high chromium cast iron.The results show that the iron matrix composites with tungsten carbide particle have high hardness.The abrasive wear resistance of composites with tungsten carbide particle is higher than that of high chromium cast iron.The properties of the matrix materials have been improved remarkably.展开更多
The article considers one of the possible approaches to the solution of an urgent issue of metal consumption reduction, increase of operating life and maximum operating temperature as well as reduction of irrecoverabl...The article considers one of the possible approaches to the solution of an urgent issue of metal consumption reduction, increase of operating life and maximum operating temperature as well as reduction of irrecoverable losses of platinum products and alloys when operating under high temperature conditions, particularly for glassblowing and single crystal growing crucibles. A two-layered composite material based on platinum-group metals and corundum plasma ceramics is thoroughly investigated. A successful experience of crucibles exploitation, designed for production of high temperature optical glasses from the composite and results of the research on composite material specimens are described.展开更多
Inorganic materials can solve transportable and on-site hydrolytic hydrogen generation issues.CaH_(2)/(Al/Si)composites are preferable due to their notable chemical properties.However,these composites require pretreat...Inorganic materials can solve transportable and on-site hydrolytic hydrogen generation issues.CaH_(2)/(Al/Si)composites are preferable due to their notable chemical properties.However,these composites require pretreatments,an inert environment,and long hours of physical ball milling for high homogeneity and synergistic effects.CaH_(2)also inhibits the hydrolysis reaction by forming its products on the Al/Si surface,which hinders the direct utilization of composites.This work represents the first investigation of NaH-CaH_(2)(Al/Si)fuel composites,which greatly overcome these limitations and can be directly used for on-site hydrogen generation and proton exchange membrane(PEM)fuel cells.The NaH-CaH_(2)(Al/Si)fuel composites were prepared by using a straightforward mixing method with variable composition ratios,showing high H_(2)yield and fuel cell(FC)performance.NaH addition provides the bridge effect,which opens up a new way to enable efficient hydrolysis and greatly enhances the hydrolysis activity of CaH_(2)/(Al/Si)composites.The novel fuel composites(NaH-CaH_(2)/Al)have extraordinary FC performance and a 0.42 W/cm2 peak power density greater than commercial hydrogen generators.It provides high H_(2)yield 84.4%for NaH-CaH_(2)/Al and 82%for NaH-CaH_(2)/Si compared to NaOH-CaH_(2)(Al/Si),NaCl-CaH_(2)(Al/Si),and KCl-CaH_(2)(Al/Si)composites.The NaH bridge effect hinders the direct water contact and stops the formation of Ca(OH)2 around Al/Si,which provides adequate pathways for the CaH_(2)(Al/Si)hydrolysis.The impressive capabilities of novel fuel composites are anticipated to offer practical uses in fuel cells,automobile applications,and portable/on-board H_(2)generation.展开更多
A novel, Ti-6 Al-4 V(Ti64)/Hydroxyapatite(HA at 5% by weight concentration) metal/ceramic composite has been fabricated using electron beam powder bed fusion(EPBF) additive manufacturing(AM): specifically, the commerc...A novel, Ti-6 Al-4 V(Ti64)/Hydroxyapatite(HA at 5% by weight concentration) metal/ceramic composite has been fabricated using electron beam powder bed fusion(EPBF) additive manufacturing(AM): specifically, the commercial electron beam melting(EBM?) process. In addition to solid Ti64 and Ti64/5% HA samples, four different unit cell(model) open-cellular mesh structures for the Ti64/5% HA composite were fabricated having densities ranging from 0.68 to 1.12 g/cm^3, and corresponding Young's moduli ranging from 2.9 to 8.0 GPa, and compressive strengths ranging from ~3 to 11 MPa. The solid Ti64/5%HA composite exhibited an optimal tensile strength of 123 MPa, and elongation of 5.5% in contrast to a maximum compressive strength of 875 MPa. Both the solid composite and mesh samples deformed primarily by brittle deformation, with the mesh samples exhibiting erratic, brittle crushing. Solid, EPBF-fabricated Ti64 samples had a Vickers microindentation hardness of 4.1 GPa while the Ti64/5%HA solid composite exhibited a Vickers microindentation hardness of 6.8 GPa. The lowest density Ti64/5%HA composite mesh strut sections had a Vickers microindentation hardness of 7.1 GPa. Optical metallography(OM) and scanning electron microscopy(SEM) analysis showed the HA dispersoids to be highly segregated along domain or grain boundaries, but homogeneously distributed along alpha(hcp) platelet boundaries within these domains in the Ti64 matrix for both the solid and mesh composites. The alpha platelet width varied from ~5 μm in the EPBF-fabricated Ti64 to ~1.1 m for the Ti64/5%HA mesh strut. The precursor HA powder diameter averaged 5 μm, in contrast to the dispersed HA particle diameters in the Ti64/5%HA composite which averaged 0.5 m. This work highlights the use of EPBF AM as a novel process for fabrication of a true composite structure, consisting of a Ti64 matrix and interspersed and exposed HA domains, which to the authors' knowledge has not been reported before. The results also illustrate the prospects not only for fabricating specialized, novel composite bone replacement scaffolds and implants, through the combination of Ti64 and HA, but also prospects for producing a variety of related metal/ceramic composites using EPBF AM.展开更多
An effective and simple design method for co-continuous composite material construction is proposed by using a hybrid methodology with triply periodic minimal surface( TPMS) cellular topology and the volumetric distan...An effective and simple design method for co-continuous composite material construction is proposed by using a hybrid methodology with triply periodic minimal surface( TPMS) cellular topology and the volumetric distance field( VDF). After generating a set of VDF-based features for the given exterior shape and desired internal core structure,a series of simple modifications in distance fields enabled us to obtain an arbitrarily-shaped complex co-continuous composite material computational model. Design results and manufactured prototypes through 3 D printing technology show that the proposed methodology has the potential to open a new paradigm for producing multifunctional next generation co-continuous composite materials which are impossible to design and manufacture using traditional CAD and CAM.展开更多
Fluoroalkyl end-capped vinyltrimethoxysilane oligomer [RF-(CH2CHSi(OMe)3)n-RF;RF = CF(CF3)OCF7, n = 2, 3;RF-(VM)n-RF] was applied to the preparation of fluoroalkyl end-capped vinyltrimethoxysilane oligomer/α-, β-, ...Fluoroalkyl end-capped vinyltrimethoxysilane oligomer [RF-(CH2CHSi(OMe)3)n-RF;RF = CF(CF3)OCF7, n = 2, 3;RF-(VM)n-RF] was applied to the preparation of fluoroalkyl end-capped vinyltrimethoxysilane oligomer/α-, β-, γ-cyclodextrin polymers (α-, β-, γ-CDPs) composites [RF-(VM-SiO2)n-RF/α-, β-, γ-CDPs] by the sol-gel reaction of the corresponding oligomer in the presence of the α-, β-, γ-CDPs under alkaline conditions. The RF-(VM-SiO2)n-RF/α-, β-, γ-CDPs composites thus obtained were found to give a good dispersibility toward the traditional organic media except for water, and were applied to the surface modification of glass to provide a sueperoleophilic/superhydrophobic characteristic on the modified surface, although the corresponding RF-(VM-SiO2)n-RF nanocomposites can give a usual oleophobic/superhydrophobic property on the surface. These composites powders were also found to be applicable to the packing material for the column chromatography to separate the mixture of oil/water and the water in oil (W/O) emulsions. More interestingly, these composite powders were found to have a higher adsorption ability toward not only low-molecular weight aromatic compounds such as bisphenol A and bisphenol AF but also volatile organic compounds, compared to that of the pristine α-, β-, γ-CDPs.展开更多
With the continuous development of the offshore wind industry,the design concept of composite foundation has been given attention in the past decade.This paper presents an accurate method for investigating the horizon...With the continuous development of the offshore wind industry,the design concept of composite foundation has been given attention in the past decade.This paper presents an accurate method for investigating the horizontal vibration of monopile-friction wheel composite foundations in layered saturated soil.Firstly,the three-dimensional continuum mechanics theory with the range of linear elasticity is introduced to calculate the frictional resistance distributed on the upper soil surface.Then,the resistances of multilayered soils and inviscid seawater to the pile shaft under horizontal harmonic excitation are obtained using Novak's plane strain model,Biot's porous media theory and radiationwave theory.Thirdly,the expressions for the deformation,bending moment and internal force of the Euler-Bernoulli pile are derived using the boundary conditions with definitephysical meaning and transfer matrix method.By comparing with the results of 1g laboratory test and the idealized formula reported by the literature,the rationality and accuracy of the developed dynamical model can be verified.Finally,this paper conducts a series of worked examples to investigate the influencesof the elastic modulus and thickness of three-layer saturated soil and the location of interlayer soil on the horizontal dynamic vibration of composite foundation.The results show that an increase in elastic modulus of the surface soil is an effective way to improve the dynamic stability of the composite foundation in service conditions.The conclusions drawn from the numerical examples can develop some guidelines for the current foundation design of offshore wind turbines.展开更多
Graphite and hexagonal boron nitride(h-BN),despite their structural similarity,exhibit opposing electronic properties,namely,metallic conductivity and wide-bandgap insulation,respectively.In recent years,graphene-h-BN...Graphite and hexagonal boron nitride(h-BN),despite their structural similarity,exhibit opposing electronic properties,namely,metallic conductivity and wide-bandgap insulation,respectively.In recent years,graphene-h-BN heterostructures have attracted significant research interest,with the resulting hybrid B-C-N atomic-layer systems exhibiting distinctive electronic properties.Notably,interface effects play a decisive role in governing the performance of these heterostructures.Nevertheless,owing to the lack of high-quality composites,the interfacial structure in B-C-N materials and the correlation with critical properties such as charge transport and band structure modulation are not fully clear.Here,we report the direct synthesis of a millimeter-sized hexagonal B-C-N composite via a solvent method under high-pressure and high-temperature conditions.Structural characterization reveals that the synthesized B-C-N composite contains isolated graphite and h-BN.Compared with pure h-BN,the B-C-N composite has a narrower bandgap and shows a pronounced photoelectric response in the visible light region.More interestingly,we find a graphite-like B-C compound with a thickness of about 30 nm at the graphite-h-BN interface,which forms Schottky junctions with graphite,thus realizing rectification properties.Our findings provide a method for synthesizing highquality B-C-N composites and offer new insights into the structure of the graphite-h-BN interface.展开更多
Traditional dynamic analysis of mechanical structures,often limited to individual beams or plates,fails to fully capture their dynamic behaviors.In systems where space and mass are constrained,such as the battery supp...Traditional dynamic analysis of mechanical structures,often limited to individual beams or plates,fails to fully capture their dynamic behaviors.In systems where space and mass are constrained,such as the battery support structures in electric aircraft,conventional absorbers and isolators are insufficient for effective vibration control.This study simplifies the battery support structure of electric aircraft as an integrated composite beam consisting of three interconnected beams,and investigated its structural dynamics properties and nonlinear vibration control under thermal conditions caused by battery heat.The nonlinear vibration control is performed using the Nitinol steel wire ropes(Ni Ti-ST),with nonlinear damping properties.The natural frequencies of system are determined using the Rayleigh-Ritz technique.Theoretical results are validated through both Finite Element Method(FEM)and hammer tests.Moreover,the dynamic equations are derived using the Lagrange method and discretized via the Galerkin Truncation Method(GTM).The Harmonic Balance Method(HBM)is used to evaluate the vibration responses of the integrated model,with further verification through the Runge-Kutta Method(RKM).The experiments are conducted to corroborate the theoretical analysis.The results show that the system frequency changes in stages with the increase of the stiffness of the integrated composite beam connection.Especially in the case of varying environments,as the temperature increases,the frequency of system will first increase to a certain maximum value and then gradually decrease.Furthermore,the NiTi-ST effectively reduces vibration in the integrated composite beam,particularly under varying temperatures and external excitations.展开更多
In the present work, composites of poly (methyl methacrylate)/titanium oxide nanoparticles (100/0, 97.5/2.5, 95/5, 92.5/7.5, 90/10 and 0/100 wt/wt%)were prepared to be used as bioequivalent materials according to thei...In the present work, composites of poly (methyl methacrylate)/titanium oxide nanoparticles (100/0, 97.5/2.5, 95/5, 92.5/7.5, 90/10 and 0/100 wt/wt%)were prepared to be used as bioequivalent materials according to their importance broad practical and medical applications. Thermal properties as well as X-ray diffraction analyses were employed to characterize the structure properties of such composite. The obtained results showed variations in the glass transition temperature (Tg), the melting temperature (Tm), shape and area of thermal peaks which were attributed to the different degrees of crystallinity and the existence of interactions between PMMA and TiO2 nanoparticle molecules. The XRD patterns showed sharpening of peaks at different concentrations of nano-TiO2 powder with PMMA. This indicated changes in the crystallinity/amorphosity ratio, and also suggested that the miscibility between the amorphous components of homo- polymers PMMA and nano-TiO2 powder is possible.The results showed that nano-TiO2 powder mix with PMMA can improve the thermal stability of the homo-polymer under investigation, lead- ing to interesting technological applications.展开更多
This study investigates the uncertain dynamic characterization of hybrid composite plates by employing advanced machine-assisted finite element methodologies.Hybrid composites,widely used in aerospace,automotive,and s...This study investigates the uncertain dynamic characterization of hybrid composite plates by employing advanced machine-assisted finite element methodologies.Hybrid composites,widely used in aerospace,automotive,and structural applications,often face variability in material properties,geometric configurations,and manufacturing processes,leading to uncertainty in their dynamic response.To address this,three surrogate-based machine learning approaches like radial basis function(RBF),multivariate adaptive regression splines(MARS),and polynomial neural networks(PNN)are integrated with a finite element framework to efficiently capture the stochastic behavior of these plates.The research focuses on predicting the first three natural frequencies under material uncertainties,which are critical to ensuring structural reliability.Monte Carlo simulation(MCS)is used as a benchmark for generating probabilistic datasets,including mean values,standard deviations,and probability density functions.The surrogate models are then trained and validated against these datasets,enabling accurate representation of uncertainty with substantially fewer samples compared to conventionalMCS.Among the methods studied,the RBFmodel demonstrates superior performance,closely approximating MCS results with a reduced sample size,thereby achieving significant computational savings.The proposed framework not only reduces computational time and costs but also maintains high predictive accuracy,making it well-suited for complex engineering systems.Beyond free vibration analysis,the methodology can be extended to more sophisticated scenarios,such as forced vibration,damping effects,and nonlinear structural responses.Overall,this work presents a computationally efficient and robust approach for surrogate-based uncertainty quantification,advancing the analysis and design of hybrid composite structures under uncertainty.展开更多
Variable stiffness composites present a promising solution for mitigating impact loads via varying the fiber volume fraction layer-wise,thereby adjusting the panel's stiffness.Since each layer of the composite may...Variable stiffness composites present a promising solution for mitigating impact loads via varying the fiber volume fraction layer-wise,thereby adjusting the panel's stiffness.Since each layer of the composite may be affected by a different failure mode,the optimal fiber volume fraction to suppress damage initiation and evolution is different across the layers.This research examines how re-allocating the fibers layer-wise enhances the composites'impact resistance.In this study,constant stiffness panels with the same fiber volume fraction throughout the layers are compared to variable stiffness ones by varying volume fraction layer-wise.A method is established that utilizes numerical analysis coupled with optimization techniques to determine the optimal fiber volume fraction in both scenarios.Three different reinforcement fibers(Kevlar,carbon,and glass)embedded in epoxy resin were studied.Panels were manufactured and tested under various loading conditions to validate results.Kevlar reinforcement revealed the highest tensile toughness,followed by carbon and then glass fibers.Varying reinforcement volume fraction significantly influences failure modes.Higher fractions lead to matrix cracking and debonding,while lower fractions result in more fiber breakage.The optimal volume fraction for maximizing fiber breakage energy is around 45%,whereas it is about 90%for matrix cracking and debonding.A drop tower test was used to examine the composite structure's behavior under lowvelocity impact,confirming the superiority of Kevlar-reinforced composites with variable stiffness.Conversely,glass-reinforced composites with constant stiffness revealed the lowest performance with the highest deflection.Across all reinforcement materials,the variable stiffness structure consistently outperformed its constant stiffness counterpart.展开更多
Typically used thermal insulation materials such as foam insulation and fibreglass may pose notable health risks and environmental impacts thereby resulting in respiratory irritation andwaste disposal issues,respectiv...Typically used thermal insulation materials such as foam insulation and fibreglass may pose notable health risks and environmental impacts thereby resulting in respiratory irritation andwaste disposal issues,respectively.While these materials are affordable and display good thermal insulation,their unsustainable traits pertaining to an intensive manufacturing process and poor disposability are major concerns.Alternative insulation materials with enhanced sustainable characteristics are therefore being explored,and one type of material which has gained notable attention owing to its low carbon footprint and low thermal conductivity is natural fibre.Among the few review studies conducted on Natural Fibre Reinforced Composite(NFRC)insulation boards,the multitude of factors and underlying mechanisms affecting their thermal conductivity performance have been sparsely covered.This review study aimed to address this gap by providing a holistic overview of some of the key intrinsic and extrinsic factors affecting the thermal conductivity performance of NFRCs.Key intrinsic factors pertaining to the microstructural features and to the physico-mechanical traits of NFRCs,namely the fibre lumen size,α,and the fibre-matrix thermal conductivity ratio,β,respectively,were found to largely affect the Transverse Thermal Conductivity(TTC)in NFRC boards.Extrinsic factors,which were found to indirectly affect NFRCs’thermal conductivity,such as fibre pre-processing,composite manufacturing and environmental factors,were also covered.Some of the noteworthy NFRC featureswhich were found to affect their thermal conductivity are volume fraction of fibres,bulk density and porosity.The findings of this study highlight the need for additional research investigation to address the foregoing limitations observed in NFRC thermal insulation boards by considering appropriate natural fibres,composition and fabrication techniques.The fabrication of high-grade NFRC boards,which will display an optimum balance between enhanced thermal insulation and long-term durability performance,could further replace conventionally used thermal insulation boards in the modern building and construction industry.展开更多
Machining damage occurs on the surface of carbon fiber reinforced polymer (CFRP) composites during processing. In the current simulation model of CFRP, the initial defects on the carbon fiber and the periodic random d...Machining damage occurs on the surface of carbon fiber reinforced polymer (CFRP) composites during processing. In the current simulation model of CFRP, the initial defects on the carbon fiber and the periodic random distribution of the reinforcement phase in the matrix are not considered in detail, which makes the characteristics of the cutting model significantly different from the actual processing conditions. In this paper, a novel three-phase model of carbon fiber/cyanate ester composites is proposed to simulate the machining damage of the composites. The periodic random distribution of the carbon fiber reinforced phase in the matrix was realized using a double perturbation algorithm. To achieve the stochastic distribution of the strength of a single carbon fiber, a novel method that combines the Weibull intensity distribution theory with the Monte Carlo method is presented. The mechanical properties of the cyanate matrix were characterized by fitting the stress-strain curves, and the cohesive zone model was employed to simulate the interface. Based on the model, the machining damage mechanism of the composites was revealed using finite element simulations and by conducting a theoretical analysis. Furthermore, the milling surfaces of the composites were observed using a scanning electron microscope, to verify the accuracy of the simulation results. In this study, the simulations and theoretical analysis of the carbon fiber/cyanate ester composite processing were carried out based on a novel three-phase model, which revealed the material failure and machining damage mechanism more accurately.展开更多
The FeNi coated LaFe_(11.6)Si_(1.4)/Sn composites were prepared by hot pressing(HP). The microstructure,corrosion behavior and magnetocaloric effect(MCE) of FeNi coated LaFe_(11.6)Si_(1.4)/Sn composites were investiga...The FeNi coated LaFe_(11.6)Si_(1.4)/Sn composites were prepared by hot pressing(HP). The microstructure,corrosion behavior and magnetocaloric effect(MCE) of FeNi coated LaFe_(11.6)Si_(1.4)/Sn composites were investigated systematically. The results show that the corrosion resistance of FeNi coated LaFe_(11.6)Si_(1.4)Sn composites is better than that of LaFe_(11.6)Si_(1.4)/Sn composites in deionized water. The maximum magnetic entropy change((-△S_M)^(max)) and relative cooling power(RCP) of FeNi coated LaFe_(11.6)Si_(1.4)/Sn composites are 13.30 J/(kg-K) and 146.25 J/kg, respectively, which are larger than that((-△S_M)^(max), 10.65 J/(kg·K) and RCP, 106.53 J/kg) of LaFe_(11.6)Si_(1.4)/Sn composites in a low magnetic field change of 2 T. FeNi coated LaFe_(11.6)Si_(1.4)/Sn composites possess a more negative slope. The improvement of magnetic properties is due to high permeability FeNi permalloy(1 J85) which improves the itinerant-electron metamagnetic(IEM) transition. So, the method of coating FeNi can provide a new idea for enhancing the corrosion resistance and magnetocaloric effect of La(Fe_xSi_(1-x))_(13)-based materials.展开更多
A composite beam is symmetric if both the material property and support are symmetric with respect to the middle point. In order to study the free vibration performance of the symmetric composite beams with different ...A composite beam is symmetric if both the material property and support are symmetric with respect to the middle point. In order to study the free vibration performance of the symmetric composite beams with different complex nonsmooth/discontinuous interfaces, we develop an R(x)-orthonormal theory, where R(x) is an integrable flexural rigidity function. The R(x)-orthonormal bases in the linear space of boundary functions are constructed, of which the second-order derivatives of the boundary functions are asked to be orthonormal with respect to the weight function R(x). When the vibration modes of the symmetric composite beam are expressed in terms of the R(x)-orthonormal bases we can derive an eigenvalue problem endowed with a special structure of the coefficient matrix A :=[aij ],aij= 0 if i + j is odd. Based on the special structure we can prove two new theorems, which indicate that the characteristic equation of A can be decomposed into the product of the characteristic equations of two sub-matrices with dimensions half lower. Hence, we can sequentially solve the natural frequencies in closed-form owing to the specialty of A. We use this powerful new theory to analyze the free vibration performance and the vibration modes of symmetric composite beams with three different interfaces.展开更多
This review provides a comprehensive overview of natural rubber(NR)composites,focusing on their properties,compounding aspects,and renewable practices involving natural fibre reinforcement.The properties of NR are inf...This review provides a comprehensive overview of natural rubber(NR)composites,focusing on their properties,compounding aspects,and renewable practices involving natural fibre reinforcement.The properties of NR are influenced by the compounding process,which incorporates ingredients such as elastomers,vulcanizing agents,accelerators,activators,and fillers like carbon black and silica.While effective in enhancing properties,these fillers lack biodegradability,prompting the exploration of sustainable alternatives.The potential of natural fibres as renewable reinforcements in NR composites is thoroughly covered in this review,highlighting both their advan-tages,such as improved sustainability,and the challenges they present,such as compatibility with the rubber matrix.Surface treatment methods,including alkali and silane treatments,are also discussed as solutions to improve fibre-matrix adhesion and mitigate these challenges.Additionally,the review highlights the potential of oil palm empty fruit bunch(EFB)fibres as a natural fibre reinforcement.The abundance of EFB fibres and their alignment with sustainable practices make them promising substitutes for conventional fillers,contributing to valuable knowledge and supporting the broader move towards renewable reinforcement to improve sustain-ability without compromising the key properties of rubber composites.展开更多
The effects of welding speed on the macroscopic and microscopic residual stresses(RSes) in friction stir welded 17 vol.% SiCp/2009 Al-T4 composite plates were studied via neutron diffraction and an improved decoupled ...The effects of welding speed on the macroscopic and microscopic residual stresses(RSes) in friction stir welded 17 vol.% SiCp/2009 Al-T4 composite plates were studied via neutron diffraction and an improved decoupled hierarchical multiscale modeling methods. Measurements showed that the macroscopic and total RSes had the largest variations in the longitudinal direction(LD). Increasing the welding speed led to higher values of measured LD macroscopic and total RSes in the matrix. The welding speed also significantly influenced the distributions and magnitudes of the microscopic RSes. The RSes were predicted via an improved hierarchical multiscale model, which includes a constant coefficient of friction based thermal model. The RSes in the composite plates before friction stir welding(FSW) were computed and then set as the initial states of the FSW process during modeling. This improved decoupled multiscale model provided improved predictions of the temperature and RSes compared with our previous model.展开更多
Finite element method is employed to calculate the temperature fields for two kinds of steel concrete composite slabs: composite slab with profiled steel sheeting and LJMB composite slab. The calculated results are in...Finite element method is employed to calculate the temperature fields for two kinds of steel concrete composite slabs: composite slab with profiled steel sheeting and LJMB composite slab. The calculated results are in good agreement with those of tests. Fire resistance of the two kinds of composite slabs is calculated by using a numeric method. The results show that: due to heat absorbing of concrete, the performance of composite slabs under fire is better than that of unprotected steel structure, and fire resistance of composite slabs mentioned in this paper is at least 30 min subjected to standard fire. Parameters related to the fire resistance are discussed. It was found that with increasing of concrete strength and thickness of slab, fire resistance increases, and with increasing of steel strength and steel ratio, fire resistance decreases. Also thickness of fire proof is calculated by a numeric method. The results obtained in this paper may be referenced for practical engineering.展开更多
A quenching and partitioning(Q&P) process was applied to vanadium carbide particle(VCp)-reinforced Fe-matrix composites(VC-Fe-MCs) to obtain a multiphase microstructure comprising VC, V8 C7, M3 C, α-Fe, and γ-Fe...A quenching and partitioning(Q&P) process was applied to vanadium carbide particle(VCp)-reinforced Fe-matrix composites(VC-Fe-MCs) to obtain a multiphase microstructure comprising VC, V8 C7, M3 C, α-Fe, and γ-Fe. The effects of the austenitizing temperature and the quenching temperature on the microstructure, mechanical properties, and wear resistance of the VC-Fe-MCs were studied. The results show that the size of the carbide became coarse and that the shape of some particles began to transform from diffused graininess into a chrysanthemum-shaped structure with increasing austenitizing temperature. The microhardness decreased with increasing austenitizing temperature but substantially increased after wear testing compared with the microhardness before wear testing; the microhardness values improved by 20.0% ± 2.5%. Retained austenite enhanced the impact toughness and promoted the transformation-induced plasticity(TRIP) effect to improve wear resistance under certain load conditions.展开更多
文摘In this paper the Expendable Pattern Casting with dry sand Vacuum(EPC-V) process is used to manufacture iron matrix composites with tungsten carbide particle.Microstructures of the composites layers were analyzed.The abrasive wear resistance of the composites layers were tested and compared with that of high chromium cast iron.The results show that the iron matrix composites with tungsten carbide particle have high hardness.The abrasive wear resistance of composites with tungsten carbide particle is higher than that of high chromium cast iron.The properties of the matrix materials have been improved remarkably.
文摘The article considers one of the possible approaches to the solution of an urgent issue of metal consumption reduction, increase of operating life and maximum operating temperature as well as reduction of irrecoverable losses of platinum products and alloys when operating under high temperature conditions, particularly for glassblowing and single crystal growing crucibles. A two-layered composite material based on platinum-group metals and corundum plasma ceramics is thoroughly investigated. A successful experience of crucibles exploitation, designed for production of high temperature optical glasses from the composite and results of the research on composite material specimens are described.
基金financial support granted by the National Natural Science Foundation of China (No. 22402225)the Gusu Innovation and Entrepreneurship Leading Talent Plan(No. ZXL2023193)+2 种基金the Sinano Talents Plan (No. 2022000175)the Guangdong Basic and Applied Basic Research Foundation (No.2023A1515111133)the ANSO Scholarship for Young Talents
文摘Inorganic materials can solve transportable and on-site hydrolytic hydrogen generation issues.CaH_(2)/(Al/Si)composites are preferable due to their notable chemical properties.However,these composites require pretreatments,an inert environment,and long hours of physical ball milling for high homogeneity and synergistic effects.CaH_(2)also inhibits the hydrolysis reaction by forming its products on the Al/Si surface,which hinders the direct utilization of composites.This work represents the first investigation of NaH-CaH_(2)(Al/Si)fuel composites,which greatly overcome these limitations and can be directly used for on-site hydrogen generation and proton exchange membrane(PEM)fuel cells.The NaH-CaH_(2)(Al/Si)fuel composites were prepared by using a straightforward mixing method with variable composition ratios,showing high H_(2)yield and fuel cell(FC)performance.NaH addition provides the bridge effect,which opens up a new way to enable efficient hydrolysis and greatly enhances the hydrolysis activity of CaH_(2)/(Al/Si)composites.The novel fuel composites(NaH-CaH_(2)/Al)have extraordinary FC performance and a 0.42 W/cm2 peak power density greater than commercial hydrogen generators.It provides high H_(2)yield 84.4%for NaH-CaH_(2)/Al and 82%for NaH-CaH_(2)/Si compared to NaOH-CaH_(2)(Al/Si),NaCl-CaH_(2)(Al/Si),and KCl-CaH_(2)(Al/Si)composites.The NaH bridge effect hinders the direct water contact and stops the formation of Ca(OH)2 around Al/Si,which provides adequate pathways for the CaH_(2)(Al/Si)hydrolysis.The impressive capabilities of novel fuel composites are anticipated to offer practical uses in fuel cells,automobile applications,and portable/on-board H_(2)generation.
文摘A novel, Ti-6 Al-4 V(Ti64)/Hydroxyapatite(HA at 5% by weight concentration) metal/ceramic composite has been fabricated using electron beam powder bed fusion(EPBF) additive manufacturing(AM): specifically, the commercial electron beam melting(EBM?) process. In addition to solid Ti64 and Ti64/5% HA samples, four different unit cell(model) open-cellular mesh structures for the Ti64/5% HA composite were fabricated having densities ranging from 0.68 to 1.12 g/cm^3, and corresponding Young's moduli ranging from 2.9 to 8.0 GPa, and compressive strengths ranging from ~3 to 11 MPa. The solid Ti64/5%HA composite exhibited an optimal tensile strength of 123 MPa, and elongation of 5.5% in contrast to a maximum compressive strength of 875 MPa. Both the solid composite and mesh samples deformed primarily by brittle deformation, with the mesh samples exhibiting erratic, brittle crushing. Solid, EPBF-fabricated Ti64 samples had a Vickers microindentation hardness of 4.1 GPa while the Ti64/5%HA solid composite exhibited a Vickers microindentation hardness of 6.8 GPa. The lowest density Ti64/5%HA composite mesh strut sections had a Vickers microindentation hardness of 7.1 GPa. Optical metallography(OM) and scanning electron microscopy(SEM) analysis showed the HA dispersoids to be highly segregated along domain or grain boundaries, but homogeneously distributed along alpha(hcp) platelet boundaries within these domains in the Ti64 matrix for both the solid and mesh composites. The alpha platelet width varied from ~5 μm in the EPBF-fabricated Ti64 to ~1.1 m for the Ti64/5%HA mesh strut. The precursor HA powder diameter averaged 5 μm, in contrast to the dispersed HA particle diameters in the Ti64/5%HA composite which averaged 0.5 m. This work highlights the use of EPBF AM as a novel process for fabrication of a true composite structure, consisting of a Ti64 matrix and interspersed and exposed HA domains, which to the authors' knowledge has not been reported before. The results also illustrate the prospects not only for fabricating specialized, novel composite bone replacement scaffolds and implants, through the combination of Ti64 and HA, but also prospects for producing a variety of related metal/ceramic composites using EPBF AM.
基金Sponsored by the Scientific Research Foundation of the Higher Education Institutions of Hainan Province of China(Grant No.Hnky2018-101)
文摘An effective and simple design method for co-continuous composite material construction is proposed by using a hybrid methodology with triply periodic minimal surface( TPMS) cellular topology and the volumetric distance field( VDF). After generating a set of VDF-based features for the given exterior shape and desired internal core structure,a series of simple modifications in distance fields enabled us to obtain an arbitrarily-shaped complex co-continuous composite material computational model. Design results and manufactured prototypes through 3 D printing technology show that the proposed methodology has the potential to open a new paradigm for producing multifunctional next generation co-continuous composite materials which are impossible to design and manufacture using traditional CAD and CAM.
文摘Fluoroalkyl end-capped vinyltrimethoxysilane oligomer [RF-(CH2CHSi(OMe)3)n-RF;RF = CF(CF3)OCF7, n = 2, 3;RF-(VM)n-RF] was applied to the preparation of fluoroalkyl end-capped vinyltrimethoxysilane oligomer/α-, β-, γ-cyclodextrin polymers (α-, β-, γ-CDPs) composites [RF-(VM-SiO2)n-RF/α-, β-, γ-CDPs] by the sol-gel reaction of the corresponding oligomer in the presence of the α-, β-, γ-CDPs under alkaline conditions. The RF-(VM-SiO2)n-RF/α-, β-, γ-CDPs composites thus obtained were found to give a good dispersibility toward the traditional organic media except for water, and were applied to the surface modification of glass to provide a sueperoleophilic/superhydrophobic characteristic on the modified surface, although the corresponding RF-(VM-SiO2)n-RF nanocomposites can give a usual oleophobic/superhydrophobic property on the surface. These composites powders were also found to be applicable to the packing material for the column chromatography to separate the mixture of oil/water and the water in oil (W/O) emulsions. More interestingly, these composite powders were found to have a higher adsorption ability toward not only low-molecular weight aromatic compounds such as bisphenol A and bisphenol AF but also volatile organic compounds, compared to that of the pristine α-, β-, γ-CDPs.
基金supported by the National Natural Science Foundation of China(Grant No.52178329),the China Scholarship Council(Grant No.202306130155)the Postgraduate Scientific Research Innovation Project of Hunan Province,China(Grant No.CX20230442).
文摘With the continuous development of the offshore wind industry,the design concept of composite foundation has been given attention in the past decade.This paper presents an accurate method for investigating the horizontal vibration of monopile-friction wheel composite foundations in layered saturated soil.Firstly,the three-dimensional continuum mechanics theory with the range of linear elasticity is introduced to calculate the frictional resistance distributed on the upper soil surface.Then,the resistances of multilayered soils and inviscid seawater to the pile shaft under horizontal harmonic excitation are obtained using Novak's plane strain model,Biot's porous media theory and radiationwave theory.Thirdly,the expressions for the deformation,bending moment and internal force of the Euler-Bernoulli pile are derived using the boundary conditions with definitephysical meaning and transfer matrix method.By comparing with the results of 1g laboratory test and the idealized formula reported by the literature,the rationality and accuracy of the developed dynamical model can be verified.Finally,this paper conducts a series of worked examples to investigate the influencesof the elastic modulus and thickness of three-layer saturated soil and the location of interlayer soil on the horizontal dynamic vibration of composite foundation.The results show that an increase in elastic modulus of the surface soil is an effective way to improve the dynamic stability of the composite foundation in service conditions.The conclusions drawn from the numerical examples can develop some guidelines for the current foundation design of offshore wind turbines.
基金supported by the National Key R&D Program of China(Grant No.2023YFA1406200)the National Science Foundation of China(Grant No.U2032215)+1 种基金Jilin Province Major Science and Technology Program,China(Grant No.20240211002GX)the Science and Technology Development Project of Jilin Province(Grant No.SKL202402004).
文摘Graphite and hexagonal boron nitride(h-BN),despite their structural similarity,exhibit opposing electronic properties,namely,metallic conductivity and wide-bandgap insulation,respectively.In recent years,graphene-h-BN heterostructures have attracted significant research interest,with the resulting hybrid B-C-N atomic-layer systems exhibiting distinctive electronic properties.Notably,interface effects play a decisive role in governing the performance of these heterostructures.Nevertheless,owing to the lack of high-quality composites,the interfacial structure in B-C-N materials and the correlation with critical properties such as charge transport and band structure modulation are not fully clear.Here,we report the direct synthesis of a millimeter-sized hexagonal B-C-N composite via a solvent method under high-pressure and high-temperature conditions.Structural characterization reveals that the synthesized B-C-N composite contains isolated graphite and h-BN.Compared with pure h-BN,the B-C-N composite has a narrower bandgap and shows a pronounced photoelectric response in the visible light region.More interestingly,we find a graphite-like B-C compound with a thickness of about 30 nm at the graphite-h-BN interface,which forms Schottky junctions with graphite,thus realizing rectification properties.Our findings provide a method for synthesizing highquality B-C-N composites and offer new insights into the structure of the graphite-h-BN interface.
基金supported by the National Natural Science Foundation of China(No.12272240)the Liaoning Revitalization Talents Program,China(No.XLYC2203197)。
文摘Traditional dynamic analysis of mechanical structures,often limited to individual beams or plates,fails to fully capture their dynamic behaviors.In systems where space and mass are constrained,such as the battery support structures in electric aircraft,conventional absorbers and isolators are insufficient for effective vibration control.This study simplifies the battery support structure of electric aircraft as an integrated composite beam consisting of three interconnected beams,and investigated its structural dynamics properties and nonlinear vibration control under thermal conditions caused by battery heat.The nonlinear vibration control is performed using the Nitinol steel wire ropes(Ni Ti-ST),with nonlinear damping properties.The natural frequencies of system are determined using the Rayleigh-Ritz technique.Theoretical results are validated through both Finite Element Method(FEM)and hammer tests.Moreover,the dynamic equations are derived using the Lagrange method and discretized via the Galerkin Truncation Method(GTM).The Harmonic Balance Method(HBM)is used to evaluate the vibration responses of the integrated model,with further verification through the Runge-Kutta Method(RKM).The experiments are conducted to corroborate the theoretical analysis.The results show that the system frequency changes in stages with the increase of the stiffness of the integrated composite beam connection.Especially in the case of varying environments,as the temperature increases,the frequency of system will first increase to a certain maximum value and then gradually decrease.Furthermore,the NiTi-ST effectively reduces vibration in the integrated composite beam,particularly under varying temperatures and external excitations.
文摘In the present work, composites of poly (methyl methacrylate)/titanium oxide nanoparticles (100/0, 97.5/2.5, 95/5, 92.5/7.5, 90/10 and 0/100 wt/wt%)were prepared to be used as bioequivalent materials according to their importance broad practical and medical applications. Thermal properties as well as X-ray diffraction analyses were employed to characterize the structure properties of such composite. The obtained results showed variations in the glass transition temperature (Tg), the melting temperature (Tm), shape and area of thermal peaks which were attributed to the different degrees of crystallinity and the existence of interactions between PMMA and TiO2 nanoparticle molecules. The XRD patterns showed sharpening of peaks at different concentrations of nano-TiO2 powder with PMMA. This indicated changes in the crystallinity/amorphosity ratio, and also suggested that the miscibility between the amorphous components of homo- polymers PMMA and nano-TiO2 powder is possible.The results showed that nano-TiO2 powder mix with PMMA can improve the thermal stability of the homo-polymer under investigation, lead- ing to interesting technological applications.
文摘This study investigates the uncertain dynamic characterization of hybrid composite plates by employing advanced machine-assisted finite element methodologies.Hybrid composites,widely used in aerospace,automotive,and structural applications,often face variability in material properties,geometric configurations,and manufacturing processes,leading to uncertainty in their dynamic response.To address this,three surrogate-based machine learning approaches like radial basis function(RBF),multivariate adaptive regression splines(MARS),and polynomial neural networks(PNN)are integrated with a finite element framework to efficiently capture the stochastic behavior of these plates.The research focuses on predicting the first three natural frequencies under material uncertainties,which are critical to ensuring structural reliability.Monte Carlo simulation(MCS)is used as a benchmark for generating probabilistic datasets,including mean values,standard deviations,and probability density functions.The surrogate models are then trained and validated against these datasets,enabling accurate representation of uncertainty with substantially fewer samples compared to conventionalMCS.Among the methods studied,the RBFmodel demonstrates superior performance,closely approximating MCS results with a reduced sample size,thereby achieving significant computational savings.The proposed framework not only reduces computational time and costs but also maintains high predictive accuracy,making it well-suited for complex engineering systems.Beyond free vibration analysis,the methodology can be extended to more sophisticated scenarios,such as forced vibration,damping effects,and nonlinear structural responses.Overall,this work presents a computationally efficient and robust approach for surrogate-based uncertainty quantification,advancing the analysis and design of hybrid composite structures under uncertainty.
基金funded by the American University of Sharjah.United Arab Emirates award number EN 9502-FRG19-M-E75。
文摘Variable stiffness composites present a promising solution for mitigating impact loads via varying the fiber volume fraction layer-wise,thereby adjusting the panel's stiffness.Since each layer of the composite may be affected by a different failure mode,the optimal fiber volume fraction to suppress damage initiation and evolution is different across the layers.This research examines how re-allocating the fibers layer-wise enhances the composites'impact resistance.In this study,constant stiffness panels with the same fiber volume fraction throughout the layers are compared to variable stiffness ones by varying volume fraction layer-wise.A method is established that utilizes numerical analysis coupled with optimization techniques to determine the optimal fiber volume fraction in both scenarios.Three different reinforcement fibers(Kevlar,carbon,and glass)embedded in epoxy resin were studied.Panels were manufactured and tested under various loading conditions to validate results.Kevlar reinforcement revealed the highest tensile toughness,followed by carbon and then glass fibers.Varying reinforcement volume fraction significantly influences failure modes.Higher fractions lead to matrix cracking and debonding,while lower fractions result in more fiber breakage.The optimal volume fraction for maximizing fiber breakage energy is around 45%,whereas it is about 90%for matrix cracking and debonding.A drop tower test was used to examine the composite structure's behavior under lowvelocity impact,confirming the superiority of Kevlar-reinforced composites with variable stiffness.Conversely,glass-reinforced composites with constant stiffness revealed the lowest performance with the highest deflection.Across all reinforcement materials,the variable stiffness structure consistently outperformed its constant stiffness counterpart.
文摘Typically used thermal insulation materials such as foam insulation and fibreglass may pose notable health risks and environmental impacts thereby resulting in respiratory irritation andwaste disposal issues,respectively.While these materials are affordable and display good thermal insulation,their unsustainable traits pertaining to an intensive manufacturing process and poor disposability are major concerns.Alternative insulation materials with enhanced sustainable characteristics are therefore being explored,and one type of material which has gained notable attention owing to its low carbon footprint and low thermal conductivity is natural fibre.Among the few review studies conducted on Natural Fibre Reinforced Composite(NFRC)insulation boards,the multitude of factors and underlying mechanisms affecting their thermal conductivity performance have been sparsely covered.This review study aimed to address this gap by providing a holistic overview of some of the key intrinsic and extrinsic factors affecting the thermal conductivity performance of NFRCs.Key intrinsic factors pertaining to the microstructural features and to the physico-mechanical traits of NFRCs,namely the fibre lumen size,α,and the fibre-matrix thermal conductivity ratio,β,respectively,were found to largely affect the Transverse Thermal Conductivity(TTC)in NFRC boards.Extrinsic factors,which were found to indirectly affect NFRCs’thermal conductivity,such as fibre pre-processing,composite manufacturing and environmental factors,were also covered.Some of the noteworthy NFRC featureswhich were found to affect their thermal conductivity are volume fraction of fibres,bulk density and porosity.The findings of this study highlight the need for additional research investigation to address the foregoing limitations observed in NFRC thermal insulation boards by considering appropriate natural fibres,composition and fabrication techniques.The fabrication of high-grade NFRC boards,which will display an optimum balance between enhanced thermal insulation and long-term durability performance,could further replace conventionally used thermal insulation boards in the modern building and construction industry.
基金Supported by Research Innovation Fund Project “Research on micro machining mechanism of fiber reinforced composites”(Grant No.HIT.NSRIF.2014055)of Harbin Institute of Technology,China
文摘Machining damage occurs on the surface of carbon fiber reinforced polymer (CFRP) composites during processing. In the current simulation model of CFRP, the initial defects on the carbon fiber and the periodic random distribution of the reinforcement phase in the matrix are not considered in detail, which makes the characteristics of the cutting model significantly different from the actual processing conditions. In this paper, a novel three-phase model of carbon fiber/cyanate ester composites is proposed to simulate the machining damage of the composites. The periodic random distribution of the carbon fiber reinforced phase in the matrix was realized using a double perturbation algorithm. To achieve the stochastic distribution of the strength of a single carbon fiber, a novel method that combines the Weibull intensity distribution theory with the Monte Carlo method is presented. The mechanical properties of the cyanate matrix were characterized by fitting the stress-strain curves, and the cohesive zone model was employed to simulate the interface. Based on the model, the machining damage mechanism of the composites was revealed using finite element simulations and by conducting a theoretical analysis. Furthermore, the milling surfaces of the composites were observed using a scanning electron microscope, to verify the accuracy of the simulation results. In this study, the simulations and theoretical analysis of the carbon fiber/cyanate ester composite processing were carried out based on a novel three-phase model, which revealed the material failure and machining damage mechanism more accurately.
基金Project supported by the Key Project of National Natural Science Foundation of China(51176065)
文摘The FeNi coated LaFe_(11.6)Si_(1.4)/Sn composites were prepared by hot pressing(HP). The microstructure,corrosion behavior and magnetocaloric effect(MCE) of FeNi coated LaFe_(11.6)Si_(1.4)/Sn composites were investigated systematically. The results show that the corrosion resistance of FeNi coated LaFe_(11.6)Si_(1.4)Sn composites is better than that of LaFe_(11.6)Si_(1.4)/Sn composites in deionized water. The maximum magnetic entropy change((-△S_M)^(max)) and relative cooling power(RCP) of FeNi coated LaFe_(11.6)Si_(1.4)/Sn composites are 13.30 J/(kg-K) and 146.25 J/kg, respectively, which are larger than that((-△S_M)^(max), 10.65 J/(kg·K) and RCP, 106.53 J/kg) of LaFe_(11.6)Si_(1.4)/Sn composites in a low magnetic field change of 2 T. FeNi coated LaFe_(11.6)Si_(1.4)/Sn composites possess a more negative slope. The improvement of magnetic properties is due to high permeability FeNi permalloy(1 J85) which improves the itinerant-electron metamagnetic(IEM) transition. So, the method of coating FeNi can provide a new idea for enhancing the corrosion resistance and magnetocaloric effect of La(Fe_xSi_(1-x))_(13)-based materials.
文摘A composite beam is symmetric if both the material property and support are symmetric with respect to the middle point. In order to study the free vibration performance of the symmetric composite beams with different complex nonsmooth/discontinuous interfaces, we develop an R(x)-orthonormal theory, where R(x) is an integrable flexural rigidity function. The R(x)-orthonormal bases in the linear space of boundary functions are constructed, of which the second-order derivatives of the boundary functions are asked to be orthonormal with respect to the weight function R(x). When the vibration modes of the symmetric composite beam are expressed in terms of the R(x)-orthonormal bases we can derive an eigenvalue problem endowed with a special structure of the coefficient matrix A :=[aij ],aij= 0 if i + j is odd. Based on the special structure we can prove two new theorems, which indicate that the characteristic equation of A can be decomposed into the product of the characteristic equations of two sub-matrices with dimensions half lower. Hence, we can sequentially solve the natural frequencies in closed-form owing to the specialty of A. We use this powerful new theory to analyze the free vibration performance and the vibration modes of symmetric composite beams with three different interfaces.
基金funded under the Collaborative Research Initiative Grant Scheme(C-RIGS),grant number C-RIGS24-016-0022 from IIUM.
文摘This review provides a comprehensive overview of natural rubber(NR)composites,focusing on their properties,compounding aspects,and renewable practices involving natural fibre reinforcement.The properties of NR are influenced by the compounding process,which incorporates ingredients such as elastomers,vulcanizing agents,accelerators,activators,and fillers like carbon black and silica.While effective in enhancing properties,these fillers lack biodegradability,prompting the exploration of sustainable alternatives.The potential of natural fibres as renewable reinforcements in NR composites is thoroughly covered in this review,highlighting both their advan-tages,such as improved sustainability,and the challenges they present,such as compatibility with the rubber matrix.Surface treatment methods,including alkali and silane treatments,are also discussed as solutions to improve fibre-matrix adhesion and mitigate these challenges.Additionally,the review highlights the potential of oil palm empty fruit bunch(EFB)fibres as a natural fibre reinforcement.The abundance of EFB fibres and their alignment with sustainable practices make them promising substitutes for conventional fillers,contributing to valuable knowledge and supporting the broader move towards renewable reinforcement to improve sustain-ability without compromising the key properties of rubber composites.
基金supported financially by the National Key R&D Program of China (No. 2017YFB0703104)the National Natural Science Foundation of China (No. 51401219)
文摘The effects of welding speed on the macroscopic and microscopic residual stresses(RSes) in friction stir welded 17 vol.% SiCp/2009 Al-T4 composite plates were studied via neutron diffraction and an improved decoupled hierarchical multiscale modeling methods. Measurements showed that the macroscopic and total RSes had the largest variations in the longitudinal direction(LD). Increasing the welding speed led to higher values of measured LD macroscopic and total RSes in the matrix. The welding speed also significantly influenced the distributions and magnitudes of the microscopic RSes. The RSes were predicted via an improved hierarchical multiscale model, which includes a constant coefficient of friction based thermal model. The RSes in the composite plates before friction stir welding(FSW) were computed and then set as the initial states of the FSW process during modeling. This improved decoupled multiscale model provided improved predictions of the temperature and RSes compared with our previous model.
文摘Finite element method is employed to calculate the temperature fields for two kinds of steel concrete composite slabs: composite slab with profiled steel sheeting and LJMB composite slab. The calculated results are in good agreement with those of tests. Fire resistance of the two kinds of composite slabs is calculated by using a numeric method. The results show that: due to heat absorbing of concrete, the performance of composite slabs under fire is better than that of unprotected steel structure, and fire resistance of composite slabs mentioned in this paper is at least 30 min subjected to standard fire. Parameters related to the fire resistance are discussed. It was found that with increasing of concrete strength and thickness of slab, fire resistance increases, and with increasing of steel strength and steel ratio, fire resistance decreases. Also thickness of fire proof is calculated by a numeric method. The results obtained in this paper may be referenced for practical engineering.
基金financially supported by the National Natural Science Foundation of China(Nos.51475480 and U1637601)the Research Funding from the State Key Laboratory of High-Performance Complex Manufacturing(No.ZZYJKT2017-01)+1 种基金Innovation Platform and Talent Plan of Hunan Province(No.2016RS2015)the Project of Innovation Driven Plan in Central South University(No.2015CX002)
文摘A quenching and partitioning(Q&P) process was applied to vanadium carbide particle(VCp)-reinforced Fe-matrix composites(VC-Fe-MCs) to obtain a multiphase microstructure comprising VC, V8 C7, M3 C, α-Fe, and γ-Fe. The effects of the austenitizing temperature and the quenching temperature on the microstructure, mechanical properties, and wear resistance of the VC-Fe-MCs were studied. The results show that the size of the carbide became coarse and that the shape of some particles began to transform from diffused graininess into a chrysanthemum-shaped structure with increasing austenitizing temperature. The microhardness decreased with increasing austenitizing temperature but substantially increased after wear testing compared with the microhardness before wear testing; the microhardness values improved by 20.0% ± 2.5%. Retained austenite enhanced the impact toughness and promoted the transformation-induced plasticity(TRIP) effect to improve wear resistance under certain load conditions.
