Zirconium-titanium-steel composite plate with the size of 2500 mm×7800 mm×(3+0.7+22)mm was prepared by explosive welding+rolling method,and its properties were analyzed by ultrasonic nondestructive testing,p...Zirconium-titanium-steel composite plate with the size of 2500 mm×7800 mm×(3+0.7+22)mm was prepared by explosive welding+rolling method,and its properties were analyzed by ultrasonic nondestructive testing,phased array waveform shape,interface structure shape,electronic scanning,and mechanical property testing.Results show that the rolling temperature of zirconiumtitanium complex should be controlled at 760°C,and the rolling reduction of each pass should be controlled at 10%–25%.The explosive velocity to prepare zirconium-titanium-steel composite plates should be controlled at 2450–2500 m/s,the density should be 0.78 g/cm3,the stand-off height should be 12 mm,and the explosive height of Zone A and Zone B should be 45–50 mm.Explosive welding combined with rolling method reduces the impact of explosive welding and multiple heat treatment on material properties.Meanwhile,the problems of surface wrinkling and cracking,which occur during the preparation process of large-sized zirconiumtitanium-steel composite plate,can be solved.展开更多
Because of the challenge of compounding lightweight,high-strength Ti/Al alloys due to their considerable disparity in properties,Al 6063 as intermediate layer was proposed to fabricate TC4/Al 6063/Al 7075 three-layer ...Because of the challenge of compounding lightweight,high-strength Ti/Al alloys due to their considerable disparity in properties,Al 6063 as intermediate layer was proposed to fabricate TC4/Al 6063/Al 7075 three-layer composite plate by explosive welding.The microscopic properties of each bonding interface were elucidated through field emission scanning electron microscope and electron backscattered diffraction(EBSD).A methodology combining finite element method-smoothed particle hydrodynamics(FEM-SPH)and molecular dynamics(MD)was proposed for the analysis of the forming and evolution characteristics of explosive welding interfaces at multi-scale.The results demonstrate that the bonding interface morphologies of TC4/Al 6063 and Al 6063/Al 7075 exhibit a flat and wavy configuration,without discernible defects or cracks.The phenomenon of grain refinement is observed in the vicinity of the two bonding interfaces.Furthermore,the degree of plastic deformation of TC4 and Al 7075 is more pronounced than that of Al 6063 in the intermediate layer.The interface morphology characteristics obtained by FEM-SPH simulation exhibit a high degree of similarity to the experimental results.MD simulations reveal that the diffusion of interfacial elements predominantly occurs during the unloading phase,and the simulated thickness of interfacial diffusion aligns well with experimental outcomes.The introduction of intermediate layer in the explosive welding process can effectively produce high-quality titanium/aluminum alloy composite plates.Furthermore,this approach offers a multi-scale simulation strategy for the study of explosive welding bonding interfaces.展开更多
For the first time,the linear and nonlinear vibrations of composite rectangular sandwich plates with various geometric patterns of lattice core have been analytically examined in this work.The plate comprises a lattic...For the first time,the linear and nonlinear vibrations of composite rectangular sandwich plates with various geometric patterns of lattice core have been analytically examined in this work.The plate comprises a lattice core located in the middle and several homogeneous orthotropic layers that are symmetrical relative to it.For this purpose,the partial differential equations of motion have been derived based on the first-order shear deformation theory,employing Hamilton’s principle and Von Kármán’s nonlinear displacement-strain relations.Then,the nonlinear partial differential equations of the plate are converted into a time-dependent nonlinear ordinary differential equation(Duffing equation)by applying the Galerkin method.From the solution of this equation,the natural frequencies are extracted.Then,to calculate the non-linear frequencies of the plate,the non-linear equation of the plate has been solved analytically using the method of multiple scales.Finally,the effect of some critical parameters of the system,such as the thickness,height,and different angles of the stiffeners on the linear and nonlinear frequencies,has been analyzed in detail.To confirmthe solution method,the results of this research have been compared with the reported results in the literature and finite elements in ABAQUS,and a perfect match is observed.The results reveal that the geometry and configuration of core ribs strongly affect the natural frequencies of the plate.展开更多
Edge defects significantly impact the forming quality of Mg/Al composite plates during the rolling process.This study aims to develop an effective rolling technique to suppress these defects.First,an enhanced Lemaitre...Edge defects significantly impact the forming quality of Mg/Al composite plates during the rolling process.This study aims to develop an effective rolling technique to suppress these defects.First,an enhanced Lemaitre damage model with a generalized stress state damage prediction mechanism was used to evaluate the key mechanical factors contributing to defect formation.Based on this evaluation,an embedded composite rolling technique was proposed.Subsequently,comparative validation was conducted at 350℃ with a 50% reduction ratio.Results showed that the plates rolled using the embedded composite rolling technique had smooth surfaces and edges,with no macroscopic cracks observed.Numerical simulation indicated that,compared to conventional processes,the proposed technique reduced the maximum edge stress triaxiality of the plates from-0.02 to-1.56,significantly enhancing the triaxial compressive stress effect at the edges,which suppressed void nucleation and growth,leading to a 96%reduction in damage values.Mechanical property evaluations demonstrated that,compared to the conventional rolling process,the proposed technique improved edge bonding strength and tensile strength by approximately 67.7%and 118%,respectively.Further microstructural characterization revealed that the proposed technique,influenced by the restriction of deformation along the transverse direction(TD),weakened the plastic flow in the TD and enhanced plastic flow along the rolling direction(RD),resulting in higher grain boundary density and stronger basal texture.This,in turn,improved the toughness and transverse homogeneity of the plates.In summary,the embedded composite rolling technique provides crucial technical guidance for the preparation of Mg-based composite plates.展开更多
In this study,microstructure and mechanical behavior of Mg/Al composite plates with Ti foil interlayer were systematically studied,with a great emphasis on the effect of different thicknesses of Ti foil interlayer.The...In this study,microstructure and mechanical behavior of Mg/Al composite plates with Ti foil interlayer were systematically studied,with a great emphasis on the effect of different thicknesses of Ti foil interlayer.The results show that compared to 100μm thick Ti foil,10μm thick Ti foil is more prone to fracture and is evenly distributed in fragments at the interface.The introduction of Ti foil can effectively refine the grain size of Mg layers of as-rolled Mg/Al composite plates,10μm thick Ti foil has a better refining effect than 100μm thick Ti foil.Ti foil can effectively increase the yield strength(YS)and ultimate strength(UTS)of as-rolled Mg/Al composite plates,10μm thick Ti foil significantly improves the elongation(El)of Mg/Al composite plate,while 100μm thick Ti foil slightly weakens the El.After annealing at 420℃ for 0.5 h and 4 h,Ti foil can inhibit the formation of intermetallic compounds(IMCs)at the interface of Mg/Al composite plates,which effectively improves the YS,UTS and El of Mg/Al composite plates.In addition,Ti foil can also significantly enhance the interfacial shear strength(SS)of Mg/Al composite plates before and after annealing.展开更多
Currently,there are a limited number of dynamic models available for braided composite plates with large overall motions,despite the incorporation of three-dimensional(3D)braided composites into rotating blade compone...Currently,there are a limited number of dynamic models available for braided composite plates with large overall motions,despite the incorporation of three-dimensional(3D)braided composites into rotating blade components.In this paper,a dynamic model of 3D 4-directional braided composite thin plates considering braiding directions is established.Based on Kirchhoff's plate assumptions,the displacement variables of the plate are expressed.By incorporating the braiding directions into the constitutive equation of the braided composites,the dynamic model of the plate considering braiding directions is obtained.The effects of the speeds,braiding directions,and braided angles on the responses of the plate with fixed-axis rotation and translational motion,respectively,are investigated.This paper presents a dynamic theory for calculating the deformation of 3D braided composite structures undergoing both translational and rotational motions.It also provides a simulation method for investigating the dynamic behavior of non-isotropic material plates in various applications.展开更多
The aluminum(Al)/steel transition joints used in ships are processed from composite plates,and their mechanical properties have a significant impact on the safety of ships.In this paper,the Al/steel composite plate wa...The aluminum(Al)/steel transition joints used in ships are processed from composite plates,and their mechanical properties have a significant impact on the safety of ships.In this paper,the Al/steel composite plate was prepared using rolling,with 5083 aluminum plate as the cladding plate,Q235 steel plate as the substrate,and TA1 titanium(Ti)plate and DT4 pure iron(Fe)plate as the intermediate layers.The heterothermic billet was prepared through induction heating by the magnetic effects of the steel plate and the pure Fe plate,and then the Al/steel composite plate was obtained by rolling.The impacts of post-rolling cooling process on the microstructure and properties of the Al/Ti/pure Fe/steel composite plate were studied.The results manifested that the pure Fe/steel interface had a good composite effect.With the increase in the cooling rate,the bonding strength of the Al/Ti interface was raised,and that of the Ti/Fe interface was increased first and then decreased.When the oil cooling process was adopted,the Al/Ti/pure Fe/steel composite plate exhibited the highest comprehensive performance.The shear strength of the Al/Ti interface and the Ti/Fe interface was 102 MPa and 186 MPa,respectively.The plastic fracture was determined as the mode of interface fracture.展开更多
In this study,a NbB_(2)/AZ91 composite exhibiting desirable mechanical properties was fabricated using a sample casting technique,followed by hard-plate rolling and short-term annealing.The effect of NbB_(2)particles ...In this study,a NbB_(2)/AZ91 composite exhibiting desirable mechanical properties was fabricated using a sample casting technique,followed by hard-plate rolling and short-term annealing.The effect of NbB_(2)particles on the microstructural evolution of the AZ91 alloy was investigated.The presence of NbB_(2)was shown to have a grain-refining effect on the AZ91 alloy and promoted dynamic recrystallization(DRX)and precipitation of fine Mg_(17)Al_(12)phases via particle-stimulated nucleation(PSN).Tensile testing revealed substantial enhancements in the ultimate tensile strength(UTS),yield strength(YS),and elongation(EL)of the as-rolled AZ91 alloy,with values of 379 MPa,292 MPa,and 14.7%,respectively,owing to the incorporation of NbB_(2)particles.Annealing led to further enhancements in EL with slight reductions in UTS and YS(360 MPa,252 MPa,and 16.8%,respectively).Owing to grain refinement and the PSN effect of the NbB_(2)particles,a significant number of geometrically necessary dislocations(GNDs)were induced in the matrix during the rolling process,which reduces the nucleation barrier and increases the number of nucleation sites for the recrystallized grains and Mg_(17)Al_(12)precipitates.Meanwhile,many residual dislocations and fine Mg_(17)Al_(12)precipitates in the as-rolled alloys were annihilated during annealing,resulting in slight grain growth and coarsening.The strengthening mechanism of the NbB_(2)/AZ91 composite are mainly associated with grain-refinement strengthening,particle-induced dislocation strengthening,strengthening resulting from mismatching coefficients of thermal expansion(CTE),and heterodeformation-induced(HDI)strengthening.Textural weakening,increased activation of non-basal slip systems,more-uniform strain patterns resulting from NbB_(2)particles,and precipitation are mainly responsible for enhancing ductility.展开更多
As-rolled titanium/steel composite plate has poor plastic deformation ability,and it is difficult to achieve synergistic deformation,especially for dissimilar metals with very different plastic deformation abilities.T...As-rolled titanium/steel composite plate has poor plastic deformation ability,and it is difficult to achieve synergistic deformation,especially for dissimilar metals with very different plastic deformation abilities.The 304/TC4 composite plate with corrugated interface was manufactured using the asymmetric rolling with local strong stress method.The changing rules of bonding strength and synergistic deformation ability of corrugated interface under different annealing process parameters were studied.The results show that in the range of 550–850℃,especially after the temperature exceeds 650℃,with increasing the annealing temperature and time,the difference of microstructure between peak and trough positions increases,and the bonding strength of the composite plate decreases gradually.Especially,the interfacial bonding strength of the plate sharply decreases at 750℃ due to the rapid growth of intermetallic compounds at the interface and the diffusion holes caused by the difference of element diffusion.The 304/TC4 composite plate has the best synergistic deformation ability when annealing at 650℃/2 h,with the elongation reaching 35%and the tensile strength decreasing to 852 MPa.High interfacial bonding strength and moderate matrix recovery are important prerequisites for synergistic deformation of composite plates.展开更多
A mesh-free method is presented to investigate the static bending properties of functionally graded carbon nanotube-reinforced composite(FG-CNTRC)plates.The curvature of the plate is directly interpolated with the nod...A mesh-free method is presented to investigate the static bending properties of functionally graded carbon nanotube-reinforced composite(FG-CNTRC)plates.The curvature of the plate is directly interpolated with the nodal deflections due to the higher-order continuity property of the moving leastsquares approximation,establishing a mesh-free computational scheme where the nodal deflections are the only unknowns.The convergence and efficiency of the proposed method are studied based on a homogeneous square plate.The FG-CNTRC plates are modeled with continuously varying Young’s moduli along the thickness direction according to the volume fraction of the carbon nanotubes(CNTs).Detailed studies have been conducted on the effects of different boundary conditions,CNT volume fractions,geometric shapes,and width-to-thickness ratios on bending behavior.CNT efficiency parameters are introduced to account for load transfer between the nanotubes and the matrix,treating the nanocomposites as orthotropic materials.However,in the actual structure,arranging the CNTs in the desired direction is more difficult compared to other fibers.Therefore,in the present study,CNTs in the composites are considered to be arranged randomly,resulting in the composite properties being treated as isotropic.The study includes second-order derivatives of deflections,and the finite element method typically requires C1 continuity for interpolation,which introduces challenges in building elements and constructing interpolation functions.The distinct advantage of the mesh-free method is that it requires only C0 weight functions.A mesh-free computational scheme based on moving leastsquares approximations for composite plates using Kirchhoffplate theory is established.Bending analyses of homogeneous and FG-CNTRC plates are conducted using the proposed method.Aspects such as boundary conditions,CNT volume fractions,geometric shapes,and width-to-thickness ratios are also discussed.Regular node arrangements and background meshes are adopted in the present study.Results are computed using different scalar parameters and numbers of nodes.Convergence properties for the central deflection of isotropic plates are analyzed in terms of the number of nodes and different scalar parameters.The normalized central deflection is defined and examined under various boundary conditions.展开更多
Current research on the fabrication of rolled composite plates primarily focuses on processing and bonding mechanisms.Compared with hot-rolling technology,the electrically assisted rolling process has demonstrated exc...Current research on the fabrication of rolled composite plates primarily focuses on processing and bonding mechanisms.Compared with hot-rolling technology,the electrically assisted rolling process has demonstrated excellent performance in interfacial bonding effects.However,the influence of different current loading modes on the interfacial recombination process of composite panels varies significantly.In this study,low-frequency electrically assisted rolling was used in the first pass to pre-bond a composite plate at a low reduction rate of 15%.High-frequency electrically assisted rolling was used during the second pass,and Al/Mg alloy composite plates were obtained.The interfacial microstructure and mechanical properties of the composite plate were coordinated regulation by designing the rolling reduction rate.The results showed the interfacial morphology of the alternating distribution of the melt-diffusion layer,diffusion layer,and the formation of a new Al/Mg bonding interface.At the melt-diffusion interface,the irregular intermetallic compounds(IMCs)and the new Al/Mg bonding interface were alternately distributed,and the IMCs contained theα-Mg,Mg17Al12,and Mg2Al3 phases.In addition,an extremely high shear strength of 78.26 MPa was achieved.Adhesion of the Mg alloy matrix was observed on the fracture surface of the Al alloy side.The high shear strength was mainly attributed to the formation of a unique interfacial structure and the appearance of a melt-diffusion layer.Compared to the diffusion-reduction interface,the regular rectangular IMCs and the new Al/Mg bonding interface were alternately distributed,and the IMCs consisted of the Mg17Al12 and Mg2Al3 phases.The shear test results showed that the shear strength of the interface reached 68.69 MPa,and a regular distribution of the Mg alloy matrix with dimples and the Al alloy matrix with a necking zone was observed on the fracture surface of the Al side.Tensile strength test results revealed a maximum value of 316.86 MPa for the Al/Mg alloy composite plate.The tensile and interfacial bonding strengths can be synchronously enhanced by coordinating the regulation of the interfacial structure.This study proposes a new electrically assisted rolling technology that is useful for the fabrication of composite plates with excellent mechanical properties.展开更多
The prediction of the rolling force and thickness ratio plays an important role in the development and application of bimetallic composite plates.To analyze the rolling force of the bimetallic composite plate more acc...The prediction of the rolling force and thickness ratio plays an important role in the development and application of bimetallic composite plates.To analyze the rolling force of the bimetallic composite plate more accurately,a novel hypothesis based on Orowan's theory was proposed.The variation in the thickness of each differential element at different positions was considered to establish the analytical model.According to the characteristics of bimetallic composite plate rolling,the rolling deformation can be divided into forward and backward slip zones.The initial thickness ratio after rolling was predetermined by the thickness ratio before rolling;the rolling force balance of the upper and lower rollers was considered the convergence condition;and the final thickness ratio of the bimetallic composite plate was obtained by iterative calculation.The calculation results of the analytical model were compared with the measured and simulated data.The results showed that the errors in the calculation of the rolling force and thickness ratio were both less than 10%.The analytical model has high precision,meets engineering requirements,and has important reference significance for rolling process optimization and thickness ratio prediction.展开更多
Because of an unfortunate mistake by authors,the Project(5227010679)of Foundation item was wrong.The corrected Project is shown as follows:Project(52271073).
In the fabrication and monitoring of parts in composite structures,which are being used more and more in a variety of engineering applications,the prediction and fatigue failure detection in composite materials is a d...In the fabrication and monitoring of parts in composite structures,which are being used more and more in a variety of engineering applications,the prediction and fatigue failure detection in composite materials is a difficult problem.This difficulty arises from several factors,such as the lack of a comprehensive investigation of the fatigue failure phenomena,the lack of a well-defined fatigue damage theory used for fatigue damage prediction,and the inhomogeneity of composites because of their multiple internal borders.This study investigates the fatigue behavior of carbon fiber reinforced with epoxy(CFRE)laminated composite plates under spectrum loading utilizing a uniqueDeep LearningNetwork consisting of a convolutional neural network(CNN).Themethod includes establishing Finite Element Model(FEM)in a plate model under a spectrum fatigue loading.Then,a CNN is trained for fatigue behavior prediction.The training phase produces promising results,showing the model’s performance with 94.21%accuracy,92.63%regression,and 91.55%F-score.To evaluate the model’s reliability,a comparison is made between fatigue data from the CNN and the FEM.It was found that the error band for this comparison is less than 0.3878MPa,affirming the accuracy and reliability of the proposed technique.The proposed method results converge with available experimental results in the literature,thus,the study suggests the broad applicability of this method to other different composite structures.展开更多
The effect of different surface treatments on the bonding strength of composite plates was investigated under the conditions of 400℃ and reduction ratio of 45%.Results show that the wire brush grinding treatment can ...The effect of different surface treatments on the bonding strength of composite plates was investigated under the conditions of 400℃ and reduction ratio of 45%.Results show that the wire brush grinding treatment can only eliminate the oxide film on the plate surface,but it can hardly produce a hard layer on the plate surface.The bonding effect depends on the element diffusion promoted by the close contact between the metals on both sides of the interface.After anodic oxidation,there is a hard layer on the metal surface,and the hard layer broken during the rolling process forms a mechanical occlusion at the bonding interface.However,the hard layer cannot form an effective combination with the metal at the interface,and the bonding can only occur in the fresh metal bonding area at the crack of the hard layer.The acid-alkali washing treatment can completely remove the hard layer on the surface of both alloys without increasing the surface roughness of the plate,and the metal on both sides of the interface is more closely bonded during the rolling process.The optimal bonding strength can be obtained by surface treatment of acid-alkali washing for the aluminum-magnesium hot-rolled bonding.展开更多
In this work,Mg/Al composite plates with different thickness ratios were prepared by the asymmetrical rolling process with differential temperature rolls and isothermal symmetrical rolling.Microstructural evolution an...In this work,Mg/Al composite plates with different thickness ratios were prepared by the asymmetrical rolling process with differential temperature rolls and isothermal symmetrical rolling.Microstructural evolution and mechanical properties of matrix and composite materials with different thicknesses were analyzed.Influence of thickness ratios on the coordinated deformability of heterogeneous metals and interface toughness under the action of temperature gradient and shear force was investigated.Results show that the relative deformation rates of matrix and composite materials converge gradually under the influence of work hardening of Mg/Al layer.The Mg layer is mainly DRXed grains and texture intensity gradually weakens with increasing thickness ratio.The Al layer is mostly dominated by subgrains and deformed grains,which have a strong correlation with thickness ratio.Strength and plasticity of composites first increase and then decrease with increasing thickness ratio.Fracture of composite plate occurs in intermetallic compounds(IMCs).Thickness of IMCs has a strong positive correlation with thickness ratio.When the thickness ratio of AZ31B/Al6061 for 5,the relative thickness of IMCs is the largest and the relative bonding strength is the smallest.When the thickness ratio of AZ31B/Al6061 for 3,there is no element aggregation in IMCs,and the comprehensive mechanical properties of composite plate are comparatively better.展开更多
In this paper,the effects of recrystallization,grain growth and texture evolution on the formability and anisotropy of Mg/Al composite plates were studied by different annealing processes.The results show that the rol...In this paper,the effects of recrystallization,grain growth and texture evolution on the formability and anisotropy of Mg/Al composite plates were studied by different annealing processes.The results show that the rolled Mg/Al composite plate exhibits obvious anisotropy and poor formability in the rolling directions(RD)and transverse directions(TD),which is the result of the synergistic effect of matrix texture and grain characteristics.Annealing-activated recrystallization can eliminate local shear bands,hardening and other defects formed by rolling,thereby softening the structure and improving the formability of the sheet.The occurrence of recrystallization behavior also makes the bimodal texture parallel to the TD distribution in the Mg matrix transform into the RD-TD surface dispersion distribution,which weakens the strong deformation texture.The Schmidt factor(SF)of each slip system is calculated to evaluate the slip system start-up probability(deformation difficulty)of the material in a certain direction.The results show that the average SF values of matrix slip in RD and TD directions increase after annealing treatment,which makes the slip system easier to start.The tensile test results show that the formability of the composite plate is the best when the annealing temperature is 300℃.At this time,the ultimate tensile strength(UTS)and yield strength(YS)are small,the elongation(EL)is large and the anisotropy of mechanical properties is the weakest.In addition,the annealing of the composite plate leads to the transformation of the fracture mechanism from brittle fracture to ductile-brittle mixed fracture.In summary,annealing treatment can effectively improve the formability and weaken the anisotropy of Mg/Al composite plates.展开更多
Bio-inspired helicoidal composite laminates,inspired by the intricate helical structures found in nature,present a promising frontier for enhancing the mechanical properties of structural designs.Hence,this study prov...Bio-inspired helicoidal composite laminates,inspired by the intricate helical structures found in nature,present a promising frontier for enhancing the mechanical properties of structural designs.Hence,this study provides a comprehensive investigation into the nonlinear free vibration and nonlinear bending behavior of bio-inspired composite plates.The inverse hyperbolic shear deformation theory(IHSDT)of plates is employed to characterize the displacement field,with the incorporation of Green-Lagrange nonlinearity.The problem is modeled using the C0finite element method(FEM),and an in-house code is developed in the MATLAB environment to solve it numerically.Various helicoidal layup configurations including helicoidal recursive(HR),helicoidal exponential(HE),helicoidal semi-circular(HS),linear helicoidal(LH),and Fibonacci helicoidal(FH)with different layup sequences and quasi-isotropic configurations are studied.The model is validated,and parametric studies are conducted.These studies investigate the effects of layup configurations,side-to-thickness ratio,modulus ratios,boundary conditions,and loading conditions at different load amplitudes on the nonlinear vibration and nonlinear bending behaviors of bio-inspired composite plates.The results show that the laminate sequence exerts a substantial impact on both nonlinear natural frequencies and nonlinear bending behaviors.Moreover,this influence varies across different side-to-thickness ratios and boundary conditions of the bio-inspired composite plate.展开更多
Epoxy resin-reinforced graphite composites have found extensive application as bipolar plates in fuel cells for stationary power supplies,valued for their lightweight nature and exceptional durability.To enhance the i...Epoxy resin-reinforced graphite composites have found extensive application as bipolar plates in fuel cells for stationary power supplies,valued for their lightweight nature and exceptional durability.To enhance the interfacial properties between graphite and epoxy resin(EP),surface oxidation of graphite was carried out using diverse functional groups.Experimental assessments illustrated that the composites with graphite oxide resulted in heightened mechanical strength and toughness compared to pristine graphite,which could be attributed to the excellent interface connection.Moreover,these composites displayed remarkable conductivity while simultaneously retaining their mechanical attributes.Furthermore,molecular dynamics simulations outcomes unveiled that the inclusion of oxygen-containing functional groups on the graphite surface augmented the interfacial energy with EP,and the interface morphology between graphite and resin exhibited heightened stability throughout the stretching process.This simple and effective technique presents opportunities for improving composites interfaces,enabling high load transfer efficiency,and opens up a potential path for developing strong and tough composite bipolar plates for fuel cells.展开更多
TA1 P-Ti/AA6061 composite plate was produced by oxidizing the surface of the titanium plate and adopting a cold roll bonding process.The results revealed that the oxide film(Ti6O)prepared on the surface of TA1 pure ti...TA1 P-Ti/AA6061 composite plate was produced by oxidizing the surface of the titanium plate and adopting a cold roll bonding process.The results revealed that the oxide film(Ti6O)prepared on the surface of TA1 pure titanium was easy to crack during the cold roll bonding,thereby promoting the formation of an effective mechanical interlock at the interface,which can effectively reduce the minimum reduction rate of the composite plates produced by cold rolling of titanium and aluminium plates.Moreover,the composite plate subjected to oxidation treatment exhibited high shear strength,particularly at a 43%reduction rate,achieving a commendable value of 117 MPa.Based on oxidation treatment and different reduction rates,the annealed composite plates at temperatures of 400,450,and 500°C displayed favorable resistance to interface delamination,highlighting their remarkable strength-plasticity compatibility as evidenced by a maximum elongation of 31.845%.展开更多
基金Key R&D Plan of Shaanxi Province(2021LLRH-05-09)Shaanxi Province Youth Talent Support Program Project(CLGC202234)Sponsored by Innovative Pilot Platform for Layered Metal Composite Materials(2024CX-GXPT-20)。
文摘Zirconium-titanium-steel composite plate with the size of 2500 mm×7800 mm×(3+0.7+22)mm was prepared by explosive welding+rolling method,and its properties were analyzed by ultrasonic nondestructive testing,phased array waveform shape,interface structure shape,electronic scanning,and mechanical property testing.Results show that the rolling temperature of zirconiumtitanium complex should be controlled at 760°C,and the rolling reduction of each pass should be controlled at 10%–25%.The explosive velocity to prepare zirconium-titanium-steel composite plates should be controlled at 2450–2500 m/s,the density should be 0.78 g/cm3,the stand-off height should be 12 mm,and the explosive height of Zone A and Zone B should be 45–50 mm.Explosive welding combined with rolling method reduces the impact of explosive welding and multiple heat treatment on material properties.Meanwhile,the problems of surface wrinkling and cracking,which occur during the preparation process of large-sized zirconiumtitanium-steel composite plate,can be solved.
基金Opening Foundation of Key Laboratory of Explosive Energy Utilization and Control,Anhui Province(BP20240104)Graduate Innovation Program of China University of Mining and Technology(2024WLJCRCZL049)Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX24_2701)。
文摘Because of the challenge of compounding lightweight,high-strength Ti/Al alloys due to their considerable disparity in properties,Al 6063 as intermediate layer was proposed to fabricate TC4/Al 6063/Al 7075 three-layer composite plate by explosive welding.The microscopic properties of each bonding interface were elucidated through field emission scanning electron microscope and electron backscattered diffraction(EBSD).A methodology combining finite element method-smoothed particle hydrodynamics(FEM-SPH)and molecular dynamics(MD)was proposed for the analysis of the forming and evolution characteristics of explosive welding interfaces at multi-scale.The results demonstrate that the bonding interface morphologies of TC4/Al 6063 and Al 6063/Al 7075 exhibit a flat and wavy configuration,without discernible defects or cracks.The phenomenon of grain refinement is observed in the vicinity of the two bonding interfaces.Furthermore,the degree of plastic deformation of TC4 and Al 7075 is more pronounced than that of Al 6063 in the intermediate layer.The interface morphology characteristics obtained by FEM-SPH simulation exhibit a high degree of similarity to the experimental results.MD simulations reveal that the diffusion of interfacial elements predominantly occurs during the unloading phase,and the simulated thickness of interfacial diffusion aligns well with experimental outcomes.The introduction of intermediate layer in the explosive welding process can effectively produce high-quality titanium/aluminum alloy composite plates.Furthermore,this approach offers a multi-scale simulation strategy for the study of explosive welding bonding interfaces.
文摘For the first time,the linear and nonlinear vibrations of composite rectangular sandwich plates with various geometric patterns of lattice core have been analytically examined in this work.The plate comprises a lattice core located in the middle and several homogeneous orthotropic layers that are symmetrical relative to it.For this purpose,the partial differential equations of motion have been derived based on the first-order shear deformation theory,employing Hamilton’s principle and Von Kármán’s nonlinear displacement-strain relations.Then,the nonlinear partial differential equations of the plate are converted into a time-dependent nonlinear ordinary differential equation(Duffing equation)by applying the Galerkin method.From the solution of this equation,the natural frequencies are extracted.Then,to calculate the non-linear frequencies of the plate,the non-linear equation of the plate has been solved analytically using the method of multiple scales.Finally,the effect of some critical parameters of the system,such as the thickness,height,and different angles of the stiffeners on the linear and nonlinear frequencies,has been analyzed in detail.To confirmthe solution method,the results of this research have been compared with the reported results in the literature and finite elements in ABAQUS,and a perfect match is observed.The results reveal that the geometry and configuration of core ribs strongly affect the natural frequencies of the plate.
基金supported by National Key Research and Development Program(2018YFA0707300)Major Program of National Natural Science Foundation of China(U22A20188).
文摘Edge defects significantly impact the forming quality of Mg/Al composite plates during the rolling process.This study aims to develop an effective rolling technique to suppress these defects.First,an enhanced Lemaitre damage model with a generalized stress state damage prediction mechanism was used to evaluate the key mechanical factors contributing to defect formation.Based on this evaluation,an embedded composite rolling technique was proposed.Subsequently,comparative validation was conducted at 350℃ with a 50% reduction ratio.Results showed that the plates rolled using the embedded composite rolling technique had smooth surfaces and edges,with no macroscopic cracks observed.Numerical simulation indicated that,compared to conventional processes,the proposed technique reduced the maximum edge stress triaxiality of the plates from-0.02 to-1.56,significantly enhancing the triaxial compressive stress effect at the edges,which suppressed void nucleation and growth,leading to a 96%reduction in damage values.Mechanical property evaluations demonstrated that,compared to the conventional rolling process,the proposed technique improved edge bonding strength and tensile strength by approximately 67.7%and 118%,respectively.Further microstructural characterization revealed that the proposed technique,influenced by the restriction of deformation along the transverse direction(TD),weakened the plastic flow in the TD and enhanced plastic flow along the rolling direction(RD),resulting in higher grain boundary density and stronger basal texture.This,in turn,improved the toughness and transverse homogeneity of the plates.In summary,the embedded composite rolling technique provides crucial technical guidance for the preparation of Mg-based composite plates.
基金supported by the National Key Research and Development Program of China(2022YFB3708400)the Guangdong Major Project of Basic and Applied Basic Research(2020B0301030006)+4 种基金the Youth Talent Support Programme of Guangdong Provincial Association for Science and Technology(SKXRC202301)the Guangdong Academy of Science Fund(2020GDASYL-20200101001,2023GDASQNRC-0210,2023GDASQNRC-0321)the Guangdong Science and Technology plan project(2023A0505030002)the GINM’Special Project of Science and Technology Development(2023GINMZX-202301020108)Evaluation Project of Guangdong Provincial Key Laboratory(2023B1212060043).
文摘In this study,microstructure and mechanical behavior of Mg/Al composite plates with Ti foil interlayer were systematically studied,with a great emphasis on the effect of different thicknesses of Ti foil interlayer.The results show that compared to 100μm thick Ti foil,10μm thick Ti foil is more prone to fracture and is evenly distributed in fragments at the interface.The introduction of Ti foil can effectively refine the grain size of Mg layers of as-rolled Mg/Al composite plates,10μm thick Ti foil has a better refining effect than 100μm thick Ti foil.Ti foil can effectively increase the yield strength(YS)and ultimate strength(UTS)of as-rolled Mg/Al composite plates,10μm thick Ti foil significantly improves the elongation(El)of Mg/Al composite plate,while 100μm thick Ti foil slightly weakens the El.After annealing at 420℃ for 0.5 h and 4 h,Ti foil can inhibit the formation of intermetallic compounds(IMCs)at the interface of Mg/Al composite plates,which effectively improves the YS,UTS and El of Mg/Al composite plates.In addition,Ti foil can also significantly enhance the interfacial shear strength(SS)of Mg/Al composite plates before and after annealing.
基金Project supported by the National Natural Science Foundation of China(Nos.12372071 and 12372070)the Aeronautical Science Fund of China(No.2022Z055052001)the Foundation of China Scholarship Council(No.202306830079)。
文摘Currently,there are a limited number of dynamic models available for braided composite plates with large overall motions,despite the incorporation of three-dimensional(3D)braided composites into rotating blade components.In this paper,a dynamic model of 3D 4-directional braided composite thin plates considering braiding directions is established.Based on Kirchhoff's plate assumptions,the displacement variables of the plate are expressed.By incorporating the braiding directions into the constitutive equation of the braided composites,the dynamic model of the plate considering braiding directions is obtained.The effects of the speeds,braiding directions,and braided angles on the responses of the plate with fixed-axis rotation and translational motion,respectively,are investigated.This paper presents a dynamic theory for calculating the deformation of 3D braided composite structures undergoing both translational and rotational motions.It also provides a simulation method for investigating the dynamic behavior of non-isotropic material plates in various applications.
基金Supported by Science Research Project of Hebei Education Department(Grant No.BJK2024138)Hebei Provincial Natural Science Foundation(Grant No.E2023203129)National Natural Science Foundation of China(Grant Nos.52004242,52075472).
文摘The aluminum(Al)/steel transition joints used in ships are processed from composite plates,and their mechanical properties have a significant impact on the safety of ships.In this paper,the Al/steel composite plate was prepared using rolling,with 5083 aluminum plate as the cladding plate,Q235 steel plate as the substrate,and TA1 titanium(Ti)plate and DT4 pure iron(Fe)plate as the intermediate layers.The heterothermic billet was prepared through induction heating by the magnetic effects of the steel plate and the pure Fe plate,and then the Al/steel composite plate was obtained by rolling.The impacts of post-rolling cooling process on the microstructure and properties of the Al/Ti/pure Fe/steel composite plate were studied.The results manifested that the pure Fe/steel interface had a good composite effect.With the increase in the cooling rate,the bonding strength of the Al/Ti interface was raised,and that of the Ti/Fe interface was increased first and then decreased.When the oil cooling process was adopted,the Al/Ti/pure Fe/steel composite plate exhibited the highest comprehensive performance.The shear strength of the Al/Ti interface and the Ti/Fe interface was 102 MPa and 186 MPa,respectively.The plastic fracture was determined as the mode of interface fracture.
基金supported by the National Natural Science Foundation of China[52171030]the National Key Research and Development Program of China[2018YFA0702903]。
文摘In this study,a NbB_(2)/AZ91 composite exhibiting desirable mechanical properties was fabricated using a sample casting technique,followed by hard-plate rolling and short-term annealing.The effect of NbB_(2)particles on the microstructural evolution of the AZ91 alloy was investigated.The presence of NbB_(2)was shown to have a grain-refining effect on the AZ91 alloy and promoted dynamic recrystallization(DRX)and precipitation of fine Mg_(17)Al_(12)phases via particle-stimulated nucleation(PSN).Tensile testing revealed substantial enhancements in the ultimate tensile strength(UTS),yield strength(YS),and elongation(EL)of the as-rolled AZ91 alloy,with values of 379 MPa,292 MPa,and 14.7%,respectively,owing to the incorporation of NbB_(2)particles.Annealing led to further enhancements in EL with slight reductions in UTS and YS(360 MPa,252 MPa,and 16.8%,respectively).Owing to grain refinement and the PSN effect of the NbB_(2)particles,a significant number of geometrically necessary dislocations(GNDs)were induced in the matrix during the rolling process,which reduces the nucleation barrier and increases the number of nucleation sites for the recrystallized grains and Mg_(17)Al_(12)precipitates.Meanwhile,many residual dislocations and fine Mg_(17)Al_(12)precipitates in the as-rolled alloys were annihilated during annealing,resulting in slight grain growth and coarsening.The strengthening mechanism of the NbB_(2)/AZ91 composite are mainly associated with grain-refinement strengthening,particle-induced dislocation strengthening,strengthening resulting from mismatching coefficients of thermal expansion(CTE),and heterodeformation-induced(HDI)strengthening.Textural weakening,increased activation of non-basal slip systems,more-uniform strain patterns resulting from NbB_(2)particles,and precipitation are mainly responsible for enhancing ductility.
基金supported by the Major Program of National Natural Science Foundation of China(U22A20188)the Natural Science Foundation of Shanxi Province(202303021224002)+1 种基金the special fund for Science and Technology Innovation Teams of Shanxi Province(202304051001025)the Open Research Fund from the Hai’an and Taiyuan University of Technology Advanced Manufacturing and Intelligent Equipment Industrial Research Institute(2023HA-TYUTKFYF036).
文摘As-rolled titanium/steel composite plate has poor plastic deformation ability,and it is difficult to achieve synergistic deformation,especially for dissimilar metals with very different plastic deformation abilities.The 304/TC4 composite plate with corrugated interface was manufactured using the asymmetric rolling with local strong stress method.The changing rules of bonding strength and synergistic deformation ability of corrugated interface under different annealing process parameters were studied.The results show that in the range of 550–850℃,especially after the temperature exceeds 650℃,with increasing the annealing temperature and time,the difference of microstructure between peak and trough positions increases,and the bonding strength of the composite plate decreases gradually.Especially,the interfacial bonding strength of the plate sharply decreases at 750℃ due to the rapid growth of intermetallic compounds at the interface and the diffusion holes caused by the difference of element diffusion.The 304/TC4 composite plate has the best synergistic deformation ability when annealing at 650℃/2 h,with the elongation reaching 35%and the tensile strength decreasing to 852 MPa.High interfacial bonding strength and moderate matrix recovery are important prerequisites for synergistic deformation of composite plates.
基金supported by the National Natural Science Foundation of China(No.52374110)Key scientific and technological projects of Henan province(No.242102320337)Basic Research Fund of Zhongyuan University of Technology(No.K2022QN008).
文摘A mesh-free method is presented to investigate the static bending properties of functionally graded carbon nanotube-reinforced composite(FG-CNTRC)plates.The curvature of the plate is directly interpolated with the nodal deflections due to the higher-order continuity property of the moving leastsquares approximation,establishing a mesh-free computational scheme where the nodal deflections are the only unknowns.The convergence and efficiency of the proposed method are studied based on a homogeneous square plate.The FG-CNTRC plates are modeled with continuously varying Young’s moduli along the thickness direction according to the volume fraction of the carbon nanotubes(CNTs).Detailed studies have been conducted on the effects of different boundary conditions,CNT volume fractions,geometric shapes,and width-to-thickness ratios on bending behavior.CNT efficiency parameters are introduced to account for load transfer between the nanotubes and the matrix,treating the nanocomposites as orthotropic materials.However,in the actual structure,arranging the CNTs in the desired direction is more difficult compared to other fibers.Therefore,in the present study,CNTs in the composites are considered to be arranged randomly,resulting in the composite properties being treated as isotropic.The study includes second-order derivatives of deflections,and the finite element method typically requires C1 continuity for interpolation,which introduces challenges in building elements and constructing interpolation functions.The distinct advantage of the mesh-free method is that it requires only C0 weight functions.A mesh-free computational scheme based on moving leastsquares approximations for composite plates using Kirchhoffplate theory is established.Bending analyses of homogeneous and FG-CNTRC plates are conducted using the proposed method.Aspects such as boundary conditions,CNT volume fractions,geometric shapes,and width-to-thickness ratios are also discussed.Regular node arrangements and background meshes are adopted in the present study.Results are computed using different scalar parameters and numbers of nodes.Convergence properties for the central deflection of isotropic plates are analyzed in terms of the number of nodes and different scalar parameters.The normalized central deflection is defined and examined under various boundary conditions.
基金Supported by National Natural Science Foundation of China(Grant Nos.52075360,52275360,51805359).
文摘Current research on the fabrication of rolled composite plates primarily focuses on processing and bonding mechanisms.Compared with hot-rolling technology,the electrically assisted rolling process has demonstrated excellent performance in interfacial bonding effects.However,the influence of different current loading modes on the interfacial recombination process of composite panels varies significantly.In this study,low-frequency electrically assisted rolling was used in the first pass to pre-bond a composite plate at a low reduction rate of 15%.High-frequency electrically assisted rolling was used during the second pass,and Al/Mg alloy composite plates were obtained.The interfacial microstructure and mechanical properties of the composite plate were coordinated regulation by designing the rolling reduction rate.The results showed the interfacial morphology of the alternating distribution of the melt-diffusion layer,diffusion layer,and the formation of a new Al/Mg bonding interface.At the melt-diffusion interface,the irregular intermetallic compounds(IMCs)and the new Al/Mg bonding interface were alternately distributed,and the IMCs contained theα-Mg,Mg17Al12,and Mg2Al3 phases.In addition,an extremely high shear strength of 78.26 MPa was achieved.Adhesion of the Mg alloy matrix was observed on the fracture surface of the Al alloy side.The high shear strength was mainly attributed to the formation of a unique interfacial structure and the appearance of a melt-diffusion layer.Compared to the diffusion-reduction interface,the regular rectangular IMCs and the new Al/Mg bonding interface were alternately distributed,and the IMCs consisted of the Mg17Al12 and Mg2Al3 phases.The shear test results showed that the shear strength of the interface reached 68.69 MPa,and a regular distribution of the Mg alloy matrix with dimples and the Al alloy matrix with a necking zone was observed on the fracture surface of the Al side.Tensile strength test results revealed a maximum value of 316.86 MPa for the Al/Mg alloy composite plate.The tensile and interfacial bonding strengths can be synchronously enhanced by coordinating the regulation of the interfacial structure.This study proposes a new electrically assisted rolling technology that is useful for the fabrication of composite plates with excellent mechanical properties.
基金Supported by National Key Research and Development Program of China(Grant No.2018YFA0707300)Major Program of National Natural Science Foundation of China(Grant No.U22A20188)+1 种基金General Program of National Natural Science Foundation of China(Grant No.51974196)Postdoctoral Science Foundation of China(Grant No.201903D421047)。
文摘The prediction of the rolling force and thickness ratio plays an important role in the development and application of bimetallic composite plates.To analyze the rolling force of the bimetallic composite plate more accurately,a novel hypothesis based on Orowan's theory was proposed.The variation in the thickness of each differential element at different positions was considered to establish the analytical model.According to the characteristics of bimetallic composite plate rolling,the rolling deformation can be divided into forward and backward slip zones.The initial thickness ratio after rolling was predetermined by the thickness ratio before rolling;the rolling force balance of the upper and lower rollers was considered the convergence condition;and the final thickness ratio of the bimetallic composite plate was obtained by iterative calculation.The calculation results of the analytical model were compared with the measured and simulated data.The results showed that the errors in the calculation of the rolling force and thickness ratio were both less than 10%.The analytical model has high precision,meets engineering requirements,and has important reference significance for rolling process optimization and thickness ratio prediction.
文摘Because of an unfortunate mistake by authors,the Project(5227010679)of Foundation item was wrong.The corrected Project is shown as follows:Project(52271073).
文摘In the fabrication and monitoring of parts in composite structures,which are being used more and more in a variety of engineering applications,the prediction and fatigue failure detection in composite materials is a difficult problem.This difficulty arises from several factors,such as the lack of a comprehensive investigation of the fatigue failure phenomena,the lack of a well-defined fatigue damage theory used for fatigue damage prediction,and the inhomogeneity of composites because of their multiple internal borders.This study investigates the fatigue behavior of carbon fiber reinforced with epoxy(CFRE)laminated composite plates under spectrum loading utilizing a uniqueDeep LearningNetwork consisting of a convolutional neural network(CNN).Themethod includes establishing Finite Element Model(FEM)in a plate model under a spectrum fatigue loading.Then,a CNN is trained for fatigue behavior prediction.The training phase produces promising results,showing the model’s performance with 94.21%accuracy,92.63%regression,and 91.55%F-score.To evaluate the model’s reliability,a comparison is made between fatigue data from the CNN and the FEM.It was found that the error band for this comparison is less than 0.3878MPa,affirming the accuracy and reliability of the proposed technique.The proposed method results converge with available experimental results in the literature,thus,the study suggests the broad applicability of this method to other different composite structures.
基金National Key Research and Development Program(2018YFA0707300)National Natural Science Foundation of China(52075472)Hebei Natural Science Foundation(E2023203129)。
文摘The effect of different surface treatments on the bonding strength of composite plates was investigated under the conditions of 400℃ and reduction ratio of 45%.Results show that the wire brush grinding treatment can only eliminate the oxide film on the plate surface,but it can hardly produce a hard layer on the plate surface.The bonding effect depends on the element diffusion promoted by the close contact between the metals on both sides of the interface.After anodic oxidation,there is a hard layer on the metal surface,and the hard layer broken during the rolling process forms a mechanical occlusion at the bonding interface.However,the hard layer cannot form an effective combination with the metal at the interface,and the bonding can only occur in the fresh metal bonding area at the crack of the hard layer.The acid-alkali washing treatment can completely remove the hard layer on the surface of both alloys without increasing the surface roughness of the plate,and the metal on both sides of the interface is more closely bonded during the rolling process.The optimal bonding strength can be obtained by surface treatment of acid-alkali washing for the aluminum-magnesium hot-rolled bonding.
基金supported by the National Natural Science Foundation of China(U1910213 and 52105388)Technological Innovation Talent Team Special Plan of Shanxi Province(202204051002002)+2 种基金Key Research and Development Program of Shanxi Province(202102050201005)Program for the Innovative Talents of Higher Education Institutions of Shanxi,Postgraduate Education Innovation Project of Shanxi Province(2020BY111)Shanxi Province patent promotion and implementation funding special projects(2019013).
文摘In this work,Mg/Al composite plates with different thickness ratios were prepared by the asymmetrical rolling process with differential temperature rolls and isothermal symmetrical rolling.Microstructural evolution and mechanical properties of matrix and composite materials with different thicknesses were analyzed.Influence of thickness ratios on the coordinated deformability of heterogeneous metals and interface toughness under the action of temperature gradient and shear force was investigated.Results show that the relative deformation rates of matrix and composite materials converge gradually under the influence of work hardening of Mg/Al layer.The Mg layer is mainly DRXed grains and texture intensity gradually weakens with increasing thickness ratio.The Al layer is mostly dominated by subgrains and deformed grains,which have a strong correlation with thickness ratio.Strength and plasticity of composites first increase and then decrease with increasing thickness ratio.Fracture of composite plate occurs in intermetallic compounds(IMCs).Thickness of IMCs has a strong positive correlation with thickness ratio.When the thickness ratio of AZ31B/Al6061 for 5,the relative thickness of IMCs is the largest and the relative bonding strength is the smallest.When the thickness ratio of AZ31B/Al6061 for 3,there is no element aggregation in IMCs,and the comprehensive mechanical properties of composite plate are comparatively better.
基金supported by the National Natural Science Foundation of China(U1910213)the Graduate Education Innovation Project of Shanxi Province(2022Y670)+1 种基金Fundamental Research Program of Shanxi Province(20210302124446)Technological Innovation Talent Team Special Plan of Shanxi Province(no.202204051002002)。
文摘In this paper,the effects of recrystallization,grain growth and texture evolution on the formability and anisotropy of Mg/Al composite plates were studied by different annealing processes.The results show that the rolled Mg/Al composite plate exhibits obvious anisotropy and poor formability in the rolling directions(RD)and transverse directions(TD),which is the result of the synergistic effect of matrix texture and grain characteristics.Annealing-activated recrystallization can eliminate local shear bands,hardening and other defects formed by rolling,thereby softening the structure and improving the formability of the sheet.The occurrence of recrystallization behavior also makes the bimodal texture parallel to the TD distribution in the Mg matrix transform into the RD-TD surface dispersion distribution,which weakens the strong deformation texture.The Schmidt factor(SF)of each slip system is calculated to evaluate the slip system start-up probability(deformation difficulty)of the material in a certain direction.The results show that the average SF values of matrix slip in RD and TD directions increase after annealing treatment,which makes the slip system easier to start.The tensile test results show that the formability of the composite plate is the best when the annealing temperature is 300℃.At this time,the ultimate tensile strength(UTS)and yield strength(YS)are small,the elongation(EL)is large and the anisotropy of mechanical properties is the weakest.In addition,the annealing of the composite plate leads to the transformation of the fracture mechanism from brittle fracture to ductile-brittle mixed fracture.In summary,annealing treatment can effectively improve the formability and weaken the anisotropy of Mg/Al composite plates.
文摘Bio-inspired helicoidal composite laminates,inspired by the intricate helical structures found in nature,present a promising frontier for enhancing the mechanical properties of structural designs.Hence,this study provides a comprehensive investigation into the nonlinear free vibration and nonlinear bending behavior of bio-inspired composite plates.The inverse hyperbolic shear deformation theory(IHSDT)of plates is employed to characterize the displacement field,with the incorporation of Green-Lagrange nonlinearity.The problem is modeled using the C0finite element method(FEM),and an in-house code is developed in the MATLAB environment to solve it numerically.Various helicoidal layup configurations including helicoidal recursive(HR),helicoidal exponential(HE),helicoidal semi-circular(HS),linear helicoidal(LH),and Fibonacci helicoidal(FH)with different layup sequences and quasi-isotropic configurations are studied.The model is validated,and parametric studies are conducted.These studies investigate the effects of layup configurations,side-to-thickness ratio,modulus ratios,boundary conditions,and loading conditions at different load amplitudes on the nonlinear vibration and nonlinear bending behaviors of bio-inspired composite plates.The results show that the laminate sequence exerts a substantial impact on both nonlinear natural frequencies and nonlinear bending behaviors.Moreover,this influence varies across different side-to-thickness ratios and boundary conditions of the bio-inspired composite plate.
基金the financial supports from the National Key R&D Program of China(No.2020YFB1505901)。
文摘Epoxy resin-reinforced graphite composites have found extensive application as bipolar plates in fuel cells for stationary power supplies,valued for their lightweight nature and exceptional durability.To enhance the interfacial properties between graphite and epoxy resin(EP),surface oxidation of graphite was carried out using diverse functional groups.Experimental assessments illustrated that the composites with graphite oxide resulted in heightened mechanical strength and toughness compared to pristine graphite,which could be attributed to the excellent interface connection.Moreover,these composites displayed remarkable conductivity while simultaneously retaining their mechanical attributes.Furthermore,molecular dynamics simulations outcomes unveiled that the inclusion of oxygen-containing functional groups on the graphite surface augmented the interfacial energy with EP,and the interface morphology between graphite and resin exhibited heightened stability throughout the stretching process.This simple and effective technique presents opportunities for improving composites interfaces,enabling high load transfer efficiency,and opens up a potential path for developing strong and tough composite bipolar plates for fuel cells.
基金supports from the National Natural Science Foundation of China(Nos.52075472,52004242)the National Key Research and Development Program of China(No.2018YFA0707300)the Natural Science Foundation of Hebei Province,China(No.E2020203001)。
文摘TA1 P-Ti/AA6061 composite plate was produced by oxidizing the surface of the titanium plate and adopting a cold roll bonding process.The results revealed that the oxide film(Ti6O)prepared on the surface of TA1 pure titanium was easy to crack during the cold roll bonding,thereby promoting the formation of an effective mechanical interlock at the interface,which can effectively reduce the minimum reduction rate of the composite plates produced by cold rolling of titanium and aluminium plates.Moreover,the composite plate subjected to oxidation treatment exhibited high shear strength,particularly at a 43%reduction rate,achieving a commendable value of 117 MPa.Based on oxidation treatment and different reduction rates,the annealed composite plates at temperatures of 400,450,and 500°C displayed favorable resistance to interface delamination,highlighting their remarkable strength-plasticity compatibility as evidenced by a maximum elongation of 31.845%.
