The effects of the component gradient distribution at interface and the fiber gradient distribution on the strength of cement-based materials were studied. The results show that the flexural strength and compressive s...The effects of the component gradient distribution at interface and the fiber gradient distribution on the strength of cement-based materials were studied. The results show that the flexural strength and compressive strength of the mortar and concrete with interface component and fiber gradient distributions are obviously improved. The strengthes of the fiber gradient distributed mortar and concrete (FGDM/C) are higher than those of fiber homogeneously distributed mortar and concrete (FHDM/C). To obtain the same strength, therefore, a smaller fiber volume content in FGDM/C is needed than that in FHDM/C. The results also show that the component gradient distribution of the concrete can be obtained by means of multi-layer vibrating formation.展开更多
In gravity gradient inversion,to choose an appropriate component combination is very important,that needs to understand the function of each component of gravity gradient in the inversion.In this paper,based on the pr...In gravity gradient inversion,to choose an appropriate component combination is very important,that needs to understand the function of each component of gravity gradient in the inversion.In this paper,based on the previous research on the characteristics of gravity gradient components,we propose a reweighted inversion method to evaluate the influence of single gravity gradient component on the inversion resolution The proposed method only adopts the misfit function of the regularized equation and introduce a depth weighting function to overcome skin effect produced in gravity gradient inversion.A comparison between different inversion results was undertaken to verify the influence of the depth weighting function on the inversion result resolution.To avoid the premise of introducing prior information,we select the depth weighting function based on the sensitivity matrix.The inversion results using the single-prism model and the complex model show that the influence of different components on the resolution of inversion results is different in different directions,however,the inversion results based on two kind of models with adding different levels of random noise are basically consistent with the results of inversion without noises.Finally,the method was applied to real data from the Vinton salt dome,Louisiana,USA.展开更多
The antiferromagnetic(AFM) interlayer coupling effective field in a ferromagnetic/non-magnetic/ferromagnetic(FM/NM/FM) sandwich structure, as a driving force, can dramatically enhance the ferromagnetic resonance(FMR) ...The antiferromagnetic(AFM) interlayer coupling effective field in a ferromagnetic/non-magnetic/ferromagnetic(FM/NM/FM) sandwich structure, as a driving force, can dramatically enhance the ferromagnetic resonance(FMR) frequency. Changing the non-magnetic spacer thickness is an effective way to control the interlayer coupling type and intensity, as well as the FMR frequency. In this study, Fe Co B/Ru/Fe Co B sandwich trilayers with Ru thickness(tRu) ranging from 1 A to 16 A are prepared by a compositional gradient sputtering(CGS) method. It is revealed that a stress-induced anisotropy is present in the Fe Co B films due to the B composition gradient in the samples. A tRu-dependent oscillation of interlayer coupling from FM to AFM with two periods is observed. An AFM coupling occurs in a range of 2 A ≤ tRu≤ 8 A and over 16 A, while an FM coupling is present in a range of tRu< 2 A and 9 A ≤ tRu≤ 14.5 A. It is interesting that an ultrahigh optical mode(OM) FMR frequency in excess of 20 GHz is obtained in the sample with tRu= 2.5 A under an AFM coupling. The dynamic coupling mechanism in trilayers is simulated, and the corresponding coupling types at different values of tRuare verified by Layadi’s rigid model. This study provides a controllable way to prepare and investigate the ultrahigh FMR films.展开更多
文摘The effects of the component gradient distribution at interface and the fiber gradient distribution on the strength of cement-based materials were studied. The results show that the flexural strength and compressive strength of the mortar and concrete with interface component and fiber gradient distributions are obviously improved. The strengthes of the fiber gradient distributed mortar and concrete (FGDM/C) are higher than those of fiber homogeneously distributed mortar and concrete (FHDM/C). To obtain the same strength, therefore, a smaller fiber volume content in FGDM/C is needed than that in FHDM/C. The results also show that the component gradient distribution of the concrete can be obtained by means of multi-layer vibrating formation.
基金supported by the National Key R&D Program of China(Nos.2016YFC0303002 and 2017YFC0601701)China Geological Survey Program(No.DD20191007)
文摘In gravity gradient inversion,to choose an appropriate component combination is very important,that needs to understand the function of each component of gravity gradient in the inversion.In this paper,based on the previous research on the characteristics of gravity gradient components,we propose a reweighted inversion method to evaluate the influence of single gravity gradient component on the inversion resolution The proposed method only adopts the misfit function of the regularized equation and introduce a depth weighting function to overcome skin effect produced in gravity gradient inversion.A comparison between different inversion results was undertaken to verify the influence of the depth weighting function on the inversion result resolution.To avoid the premise of introducing prior information,we select the depth weighting function based on the sensitivity matrix.The inversion results using the single-prism model and the complex model show that the influence of different components on the resolution of inversion results is different in different directions,however,the inversion results based on two kind of models with adding different levels of random noise are basically consistent with the results of inversion without noises.Finally,the method was applied to real data from the Vinton salt dome,Louisiana,USA.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51871127 and 11674187)。
文摘The antiferromagnetic(AFM) interlayer coupling effective field in a ferromagnetic/non-magnetic/ferromagnetic(FM/NM/FM) sandwich structure, as a driving force, can dramatically enhance the ferromagnetic resonance(FMR) frequency. Changing the non-magnetic spacer thickness is an effective way to control the interlayer coupling type and intensity, as well as the FMR frequency. In this study, Fe Co B/Ru/Fe Co B sandwich trilayers with Ru thickness(tRu) ranging from 1 A to 16 A are prepared by a compositional gradient sputtering(CGS) method. It is revealed that a stress-induced anisotropy is present in the Fe Co B films due to the B composition gradient in the samples. A tRu-dependent oscillation of interlayer coupling from FM to AFM with two periods is observed. An AFM coupling occurs in a range of 2 A ≤ tRu≤ 8 A and over 16 A, while an FM coupling is present in a range of tRu< 2 A and 9 A ≤ tRu≤ 14.5 A. It is interesting that an ultrahigh optical mode(OM) FMR frequency in excess of 20 GHz is obtained in the sample with tRu= 2.5 A under an AFM coupling. The dynamic coupling mechanism in trilayers is simulated, and the corresponding coupling types at different values of tRuare verified by Layadi’s rigid model. This study provides a controllable way to prepare and investigate the ultrahigh FMR films.
