A precise diagnosis of the complex post-fracturing characteristics and parameter variations in tight gas reservoirs is essential for optimizing fracturing technology,enhancing treatment effectiveness,and assessing pos...A precise diagnosis of the complex post-fracturing characteristics and parameter variations in tight gas reservoirs is essential for optimizing fracturing technology,enhancing treatment effectiveness,and assessing post-fracturing production capacity.Tight gas reservoirs face challenges due to the interaction between natural fractures and induced fractures.To address these issues,a theoretical model for diagnosing fractures under varying leak-off mechanisms has been developed,incorporating the closure behavior of natural fractures.This model,grounded in material balance theory,also accounts for shut-in pressure.The study derived and plotted typical G-function charts,which capture fracture behavior during closure.By superimposing the G-function in the closure phase of natural fractures with pressure derivative curves,the study explored how fracture parameters—including leak-off coefficient,fracture area,closure pressure,and closure time—impact these diagnostic charts.Findings show that variations in natural fracture flexibility,fracture area,and controlling factors influence the superimposed G-function pressure derivative curve,resulting in distinctive“concave”or“convex”patterns.Field data from Well Y in a specific tight gas reservoir were used to validate the model,confirming both its reliability and practicality.展开更多
By integrating laboratory physical modeling experiments with machine learning-based analysis of dominant factors,this study explored the feasibility of pulse hydraulic fracturing(PHF)in deep coal rocks and revealed th...By integrating laboratory physical modeling experiments with machine learning-based analysis of dominant factors,this study explored the feasibility of pulse hydraulic fracturing(PHF)in deep coal rocks and revealed the fracture propagation patterns and the mechanisms of pulsating loading in the process.The results show that PHF induces fatigue damage in coal matrix,significantly reducing breakdown pressure and increasing fracture network volume.Lower vertical stress differential coefficient(less than 0.31),lower peak pressure ratio(less than 0.9),higher horizontal stress differential coefficient(greater than 0.13),higher pulse amplitude ratio(greater than or equal to 0.5)and higher pulse frequency(greater than or equal to 3 Hz)effectively decrease the breakdown pressure.Conversely,higher vertical stress differential coefficient(greater than or equal to 0.31),higher pulse amplitude ratio(greater than or equal to 0.5),lower horizontal stress differential coefficient(less than or equal to 0.13),lower peak pressure ratio(less than 0.9),and lower pulse frequency(less than 3 Hz)promote the formation of a complex fracture network.Vertical stress and peak pressure are the most critical geological and engineering parameters affecting the stimulation effectiveness of PHF.The dominant mechanism varies with coal rank due to differences in geomechanical characteristics and natural fracture development.Low-rank coal primarily exhibits matrix strength degradation.High-rank coal mainly involves the activation of natural fractures and bedding planes.Medium-rank coal shows a coexistence of matrix strength degradation and micro-fracture connectivity.The PHF forms complex fracture networks through the dual mechanism of matrix strength degradation and fracture network connectivity enhancement.展开更多
This study investigated the micro-sliding frictional behavior of shale in fracturing fluids under varying operational conditions using Chang 7 shale oil reservoir core samples.Through systematic micro-sliding friction...This study investigated the micro-sliding frictional behavior of shale in fracturing fluids under varying operational conditions using Chang 7 shale oil reservoir core samples.Through systematic micro-sliding friction experiments,the characteristics and governing mechanisms of shale friction were elucidated.Complementary analyses were conducted to characterize the mineral composition,petrophysical properties,and micromorphology of the shale samples,providing insights into the relationship between microscopic structure and frictional response.In this paper,the characteristics and variation law of shale micro-sliding friction under different types of graphite materials as additives in LGF-80(Low-damage Guar Fluid)oil flooding recoverable fracturing fluid system were mainly studied.In addition,the finite element numerical simulation experiment of hydraulic fracturing was adopted to study the influence of the friction coefficient of natural fracture surfaces on fracture propagation and formation of the fracture network.The geometric complexity of fracture networks was systematically quantified under varying frictional coefficients of natural fracture surfaces through multi-parametric characterization and morphometric analysis.The research results show that graphite micro-particles reduce friction and drag.Based on this,this paper proposes a new idea of graphite micro-particles as an additive in the LGF-80 oil flooding recoverable fracturing fluid system to reduce friction on the fracture surface.展开更多
In this paper,a large-scale experimental system was established to identify the migration and distribution laws of complex fracture proppant in shale reservoir volume fracturing.With this system,the effects of seconda...In this paper,a large-scale experimental system was established to identify the migration and distribution laws of complex fracture proppant in shale reservoir volume fracturing.With this system,the effects of secondary fracture angle,fluid displacement,proppant concentration and size,fracturing fluid viscosity and other factors on the migration and distribution of proppant were tested,and the migration and distribution of proppant in primary/secondary fractures were analyzed.The following results were obtained.First,the fluid flow pattern in fractures transforms gradually from laminar flow into turbulent flow with the increase of fracture supporting height.Second,the migration modes of proppant in fractures mainly include suspended migration and gliding migration.Third,the distribution form of proppant in primary fractures before branching is related to secondary fracture angle,fluid displacement and proppant concentration and size,among which the fluid displacement is the most important factor.Fourth,the mass ratio of proppant in primary fractures after branching is proportional to the secondary fracture angle,fluid displacement,fracturing fluid viscosity and proppant concentration and size,and is inversely proportional to the flow ratio between secondary fractures and primary fractures.Fifth,the mass ratio of proppant in secondary fractures after branching is proportional to fluid displacement,fracturing fluid viscosity and flow ratio between secondary fractures and primary fractures,and is inversely proportional to secondary fracture angle and proppant concentration and size.Sixth,the angle at the leading edge of proppant bank in the primary fractures after branching is proportional to the proppant concentration and size and the flow ratio between secondary fractures and primary fractures,but is inversely proportional to secondary fracture angle,fluid displacement and fracturing fluid viscosity.Seventh,the angle at the leading edge of proppant bank in the secondary fractures after branching is proportional to the secondary fracture angle and the proppant concentration and size,but is inversely proportional to the fluid displacement,fracturing fluid viscosity and flow ratio between secondary fractures and primary fractures.In conclusion,the research results can provide a theoretical support for proppant optimization and program design of shale reservoir volume fracturing.展开更多
Multi-stage volume fracturing of horizontal wells is the main means to develop tight gas reservoirs.Complex fracture networks of various shapes are generated around the wellbore after volume fracturing.At present,howe...Multi-stage volume fracturing of horizontal wells is the main means to develop tight gas reservoirs.Complex fracture networks of various shapes are generated around the wellbore after volume fracturing.At present,however,most of the well test models suitable for fracturing horizontal wells take all hydraulic fractures as single main fractures,which results in a large error between well test interpretation result and actual situation.As a result,the fracture network characteristic parameters of the stimulated areas cannot be obtained accurately.To this end,a well test model for complex fracture networks in tight-gas fracturing horizontal wells was established on the basis of the non-structural discrete fracture model.Then,this model was solved by using thefinite element method with combined triangular elements and linear elements.And accordingly,the well test type curves of a horizontal well under different fracture network patterns(rectangular,elliptical and hyperbolic)were prepared.Based on this,well test type curves were analyzed from the aspects of characteristics and influential factors and were compared with those obtained from the conventional single-fracture model.Finally,the new model was applied in well test interpretation of one multi-stage volume fracturing horizontal well in the gas reservoir of Permian Shan 1 formation in the Qingyang Gas Field of the Ordos Basin.And the following research results were obtained.First,the biggest difference of well test type curve between the fracture network model and the conventional single-fracture model occurs in the early stage,the characteristics offirst linearflow regime are replaced with the characteristics of pseudo-radialflow regime in the stimulated area.Second,the end time of the pseudo-radialflow regime in the stimulated area is mainly dominated by the size and shape of the stimulated area.The larger the stimulated area is,the longer the pseudo-radialflow regime lasts.As the shape of the stimulated area approaches to be elongated,the characteristics of the well test type curve obtained by the new model are more consistent with those by the single-fracture model.Third,the pressure derivative value of the pseudo-radialflow regime in the stimulated area is mainly dependent on the conductivity and density of the fracture network.The higher the density or the conductivity of fracture network in the stimulated area is,the earlier the wellbore storage effect regime ends,the lower the pressure derivative value of the pseudo-radialflow regime in the stimulated area is and the more obvious the characteristics of the horizontal line are.In conclusion,case study results confirm that the new model is reliable and practical and can provide accurate reservoir parameters as well as the size of the effectively stimulated area by volume fracturing and the conductivity of fracture network,which is conducive to evaluating the stimulation effect of volume fracturing and predicting the postfrac production performance.展开更多
The oil production of the multi-fractured horizontal wells(MFHWs) declines quickly in unconventional oil reservoirs due to the fast depletion of natural energy. Gas injection has been acknowledged as an effective meth...The oil production of the multi-fractured horizontal wells(MFHWs) declines quickly in unconventional oil reservoirs due to the fast depletion of natural energy. Gas injection has been acknowledged as an effective method to improve oil recovery factor from unconventional oil reservoirs. Hydrocarbon gas huff-n-puff becomes preferable when the CO_(2) source is limited. However, the impact of complex fracture networks and well interference on the EOR performance of multiple MFHWs is still unclear. The optimal gas huff-n-puff parameters are significant for enhancing oil recovery. This work aims to optimize the hydrocarbon gas injection and production parameters for multiple MFHWs with complex fracture networks in unconventional oil reservoirs. Firstly, the numerical model based on unstructured grids is developed to characterize the complex fracture networks and capture the dynamic fracture features.Secondly, the PVT phase behavior simulation was carried out to provide the fluid model for numerical simulation. Thirdly, the optimal parameters for hydrocarbon gas huff-n-puff were obtained. Finally, the dominant factors of hydrocarbon gas huff-n-puff under complex fracture networks are obtained by fuzzy mathematical method. Results reveal that the current pressure of hydrocarbon gas injection can achieve miscible displacement. The optimal injection and production parameters are obtained by single-factor analysis to analyze the effect of individual parameter. Gas injection time is the dominant factor of hydrocarbon gas huff-n-puff in unconventional oil reservoirs with complex fracture networks. This work can offer engineers guidance for hydrocarbon gas huff-n-puff of multiple MFHWs considering the complex fracture networks.展开更多
In this paper,a series of specific studies were carried out to investigate the complex form of fracture networks and figure out the multi-scale flowing laws of nano/micro poresecomplex fracture networks-wellbore durin...In this paper,a series of specific studies were carried out to investigate the complex form of fracture networks and figure out the multi-scale flowing laws of nano/micro poresecomplex fracture networks-wellbore during the development of shale reservoirs by means of horizontal well fracturing.First,hydraulic fractures were induced by means of Brazilian splitting tests.Second,the forms of the hydraulic fractures inside the rock samples were observed by means of X-ray CT scanning to measure the opening of hydraulic fractures.Third,based on the multi-scale unified flowing model,morphological description of fractures and gas flowing mechanism in the matrixecomplex fracture networkewellbore,the productivity equation of single-stage horizontal well fracturing which includes diffusion,slipping and desorption was established.And fourthly,a productivity prediction model of horizontal well multi-stage fracturing in the shale reservoir was established considering the interference between the multi-stage fracturing zones and the pressure drop in the horizontal wellbore.The following results were obtained.First,hydraulic fractures are in the form of a complex network.Second,the measured opening of hydraulic fractures is in the range of 4.25-453 mm,averaging 112 mm.Third,shale gas flowing in different shapes of fracture networks follows different nonlinear flowing laws.Forth,as the fracture density in the strongly stimulated zones rises and the distribution range of the hydraulic fractures in strongly/weakly stimulated zones enlarges,gas production increases gradually.As the interference occurs in the flowing zones of fracture networks between fractured sections,the increasing amplitude of gas production rates decreases.Fifth,when the length of a simulated horizontal well is 1500 m and the half length of a fracture network in the strongly stimulated zone is 100 m,the productivity effect of stage 10 fracturing is the best.Therefore,it is necessary to control fracturing degree reasonably and optimize fracturing parameters,so as to provide a theoretical support for the optimization design of shale gas reservoir fracturing.展开更多
Multi-stage hydraulic fracturing of horizontal wells is the main stimulation method in recovering gas from tight shale gas reservoirs, and stage spacing deter- mination is one of the key issues in fracturing design. T...Multi-stage hydraulic fracturing of horizontal wells is the main stimulation method in recovering gas from tight shale gas reservoirs, and stage spacing deter- mination is one of the key issues in fracturing design. The initiation and propagation of hydraulic fractures will cause stress redistribution and may activate natural fractures in the reservoir. Due to the limitation of the analytical method in calculation of induced stresses, we propose a numerical method, which incorporates the interaction of hydraulic fractures and the wellbore, and analyzes the stress distri- bution in the reservoir under different stage spacing. Simulation results indicate the following： （1） The induced stress was overestimated from the analytical method because it did not take into account the interaction between hydraulic fractures and the horizontal wellbore. （2） The hydraulic fracture had a considerable effect on the redis- tribution of stresses in the direction of the horizontal wellbore in the reservoir. The stress in the direction per- pendicular to the horizontal wellbore after hydraulic frac- turing had a minor change compared with the original in situ stress. （3） Stress interferences among fractures were greatly connected with the stage spacing and the distance from the wellbore. When the fracture length was 200 m, and the stage spacing was 50 m, the stress redistribution due to stage fracturing may divert the original stress pat- tern, which might activate natural fractures so as to generate a complex fracture network.展开更多
Digital rock physics(DRP)is a paramount technology to improve the economic benefits of oil and gas fields,devise more scientific oil and gas field development plans,and create digital oil and gas fields.Currently,a si...Digital rock physics(DRP)is a paramount technology to improve the economic benefits of oil and gas fields,devise more scientific oil and gas field development plans,and create digital oil and gas fields.Currently,a significant gap is present between DRP theory and practical applications.Conventional digital-core construction focuses only on simple cores,and the recognition and segmentation effect of fractures and pores of complex cores is poor.The identification of rock minerals is inaccurate,which leads to the difference between the digital and actual cores.To promote the application of DRP in developing oil and gas fields,based on the high-precision X-ray computed tomography scanning technology,the U-Net deep learning model of the full convolution neural network is used to segment the pores,fractures,and matrix from the complex rock core with natural fractures innovatively.Simultaneously,the distribution of rock minerals is divided,and the distribution of rock conditions is corrected by X-ray diffraction.A pore—fracture network model is established based on the equivalent radius,which lays the foundation for fluid seepage simulation.Finally,the accuracy of the established a digital core is verified by the porosity measured via nuclear magnetic resonance technology,which is of great significance to the development and application of DRP in oil and gas fields.展开更多
Hydraulic fracturing is a key technology for the development of unconventional hydrocarbon resources.The proppant placement morphology determines the fracture conductivity,thus affecting the reservoir stimulation effe...Hydraulic fracturing is a key technology for the development of unconventional hydrocarbon resources.The proppant placement morphology determines the fracture conductivity,thus affecting the reservoir stimulation effect.In this paper,the proppant migration and placement within complex fractures was studied by considering the fracture wall roughness through computational fluid mechanics-discrete element method(CFD-DEM)in numerical simulation,which is a key approach to study the proppant migration and placement.The results show that the proppant placement non-uniformity,proppant migration capacity,and proppant volume filled in the far-end and the secondary branched fracture are enhanced within the rough fracture compared with those within smooth fractures.The proppant migration capacity is increased within the fracture at low inclination angles(<60°)and low approach angles(<90°),and the proppant placement area is larger in the inclined fracture than that in the vertical fracture.The rise of injection rate and fracturing fluid viscosity causes more proppants migrate to far-end or secondary fractures,resulting in a non-proppant area within the near-wellbore fracture.An increase by 1.3 times in the injection rate and 3 times in the fracturing fluid viscosity leads to a decrease by 26.6%and 27%,respectively,in the proppant placement area within the near-wellbore fracture.The staged injection with small size proppants followed by large size proppants increases the proppant placement area in the primary fracture by 13%-26%,and that with large size proppants followed by small size proppants increases the proppant placement area by 19%-25%,which is due to that the latter method facilitates filling of the secondary branched fracture.The injection location mainly affects the proppant filling degree within the near-wellbore fractures.Compared with the upper injection,the middle and lower injection is not beneficial to filling of proppants within the near-wellbore fracture.展开更多
AIM: To evaluate the effectiveness and safety of complex orbital fracture reconstruction with titanium implants. METHODS: A retrospective review of 46 patients treated with complex orbital fractures reconstruction usi...AIM: To evaluate the effectiveness and safety of complex orbital fracture reconstruction with titanium implants. METHODS: A retrospective review of 46 patients treated with complex orbital fractures reconstruction using titanium implants from January 2005 to December 2008 was conducted. The following data were recorded: age, gender, mechanism of injury, preoperative and postoperative orbital CT, visual acuity, diplopia, ocular motility and Hertel exophthalmometer. RESULTS: The most common cause was motor vehicle accident (47.8%), followed by industrial injury (30.4%). All patients had improved appearance after operation and CT scan at one week after operation showed the fracture defects of orbit and neighboring areas had been reconstructed. Forty-six cases had various degrees of enophthalmos before operation. Among them, 32 cases were completely corrected, 11 cases improved obviously and 3 cases had no improvement after operation. Thirty-six patients with visual acuity =20/60 revealed diplopia of various degrees, including 26 patients had diplopia in right ahead and/or reading positions. At the sixth month after operation, diplopia disappeared in five patients, 7 patients still had diplopia in right ahead and/or reading positions, 14 patients had diplopia in positions rather than right ahead and reading positions (<20 degrees) and ten patients had diplopia only at peripheral gazing (>20 degrees). All patients had various degrees of ocular motility disorders before operation. At the sixth month after operation, eyeball movement disorder disappeared in 9 patients, 31 patients showed improvement and 6 patients had no improvement. Complications of implant infection, rejection and displacement were not reported after operation. CONCLUSION: The application of titanium implants in the repair of complex orbital fractures greatly improves the appearance and functional results, which is a favorable material for plastic surgery of complex orbital fracture.展开更多
Coalbed methane(CBM)is an important unconventional natural gas.Exploitation of multilayered CBM reservoir is still facing the challenge of low production rate.Radial borehole fracturing,which integrates radial jet dri...Coalbed methane(CBM)is an important unconventional natural gas.Exploitation of multilayered CBM reservoir is still facing the challenge of low production rate.Radial borehole fracturing,which integrates radial jet drilling and hydraulic fracturing,is expected to create complex fracture networks in multilayers and enhance CBM recovery.The main purpose of this paper is to investigate the mechanisms and efficacy of radial borehole fracturing in increasing CBM production in multiple layers.First,a two-phase flow and multi-scale 3 D fracture network including radial laterals,hydraulic fractures and face/butt cleats model is established,and embedded discrete fracture model(EDFM)is applied to handle the complex fracture networks.Then,effects of natural-fracture nonuniform distribution are investigated to show the advantages of targeted stimulation for radial borehole fracturing.Finally,two field CBM wells located in eastern Yunnan-western Guizhou,China were presented to illuminate the stimulation efficiency by radial borehole fracturing.The results indicated that compared with vertical well fracturing,radial borehole fracturing can achieve higher gas/water daily production rate and cumulative gas/water production,approximately 2 times higher.Targeted communications to cleats and sweet spots and flexibility in designing radial borehole parameters in different layers so as to increase fracture-network complexity and connectivity are the major reasons for production enhancement of radial borehole fracturing.Furthermore,the integration of geology-engineering is vital for the decision of radial borehole fracturing designing scheme.The key findings of this paper could provide useful insights towards understanding the capability of radial borehole fracturing in developing CBM and coal-measure gas in multiple-thin layers.展开更多
Severe well interference through complex fracture networks(CFNs)can be observed among multi-well pads in low permeability reservoirs.The well interference analysis between multi-fractured horizontal wells(MFHWs)is vit...Severe well interference through complex fracture networks(CFNs)can be observed among multi-well pads in low permeability reservoirs.The well interference analysis between multi-fractured horizontal wells(MFHWs)is vitally important for reservoir effective development.Well interference has been historically investigated by pressure transient analysis,while it has shown that rate transient analysis has great potential in well interference diagnosis.However,the impact of complex fracture networks(CFNs)on rate transient behavior of parent well and child well in unconventional reservoirs is still not clear.To further investigate,this paper develops an integrated approach combining pressure and rate transient analysis for well interference diagnosis considering CFNs.To perform multi-well simulation considering CFNs,non-intrusive embedded discrete fracture model approach was applied for coupling fracture with reservoir models.The impact of CFN including natural fractures and frac-hits on pressure and rate transient behavior in multi-well system was investigated.On a logelog plot,interference flow and compound linear flow are two new flow regimes caused by nearby producers.When both NFs and frac-hits are present in the reservoir,frac-hits have a greater impact on well#1 which contains frac-hits,and NFs have greater impact on well#3 which does not have frac-hits.For all well producing circumstances,it might be challenging to see divergence during pseudosteady state flow brought on by frac-hits on the logelog plot.Besides,when NFs occur,reservoir depletion becomes noticeable in comparison to frac-hits in pressure distribution.Application of this integrated approach demonstrates that it works well to characterize the well interference among different multi-fractured horizontal wells in a well pad.Better reservoir evaluation can be acquired based on the new features observed in the novel model,demonstrating the practicability of the proposed approach.The findings of this study can help for better evaluating well interference degree in multi-well systems combing PTA and RTA,which can reduce the uncertainty and improve the accuracy of the well interference analysis based on both field pressure and rate data.展开更多
In practical development of unconventional reservoirs,fracture networks are a highly conductive transport media for subsurface fluid flow.Therefore,it is crucial to clearly determine the fracture properties used in pr...In practical development of unconventional reservoirs,fracture networks are a highly conductive transport media for subsurface fluid flow.Therefore,it is crucial to clearly determine the fracture properties used in production forecast.However,it is different to calibrate the properties of fracture networks because it is an inverse problem with multi-patterns and highcomplexity of fracture distribution and inherent defect of multiplicity of solution.In this paper,in order to solve the problem,the complex fracture model is divided into two sub-systems,namely"Pattern A"and"Pattern B."In addition,the generation method is grouped into two categories.Firstly,we construct each sub-system based on the probability density function of the fracture properties.Secondly,we recombine the sub-systems into an integral complex fracture system.Based on the generation mechanism,the estimation of the complex fracture from dynamic performance and observation data can be solved as an inverse problem.In this study,the Bayesian formulation is used to quantify the uncertainty of fracture properties.To minimize observation data misfit immediately as it occurs,we optimize the updated properties by a simultaneous perturbation stochastic algorithm which requires only two measurements of the loss function.In numerical experiments,we firstly visualize that small-scale fractures significantly contribute to the flow simulation.Then,we demonstrate the suitability and effectiveness of the Bayesian formulation for calibrating the complex fracture model in the following simulation.展开更多
The paper presents a novel hydraulic fracturing model for the characterization and simulation of the complex fracture network in shale gas reservoirs. We go beyond the existing method that uses planar or orthogonal co...The paper presents a novel hydraulic fracturing model for the characterization and simulation of the complex fracture network in shale gas reservoirs. We go beyond the existing method that uses planar or orthogonal conjugate fractures for representing the ＇＇complexity＇＇ of the network. Bifurcation of fractures is performed utilizing the Lindenmayer system based on fractal geometry to describe the fracture propagation pattern, density and network connectivity. Four controlling parameters are proposed to describe the details of complex fractures and stimulated reservoir volume（SRV）. The results show that due to the multilevel feature of fractal fractures, the model could provide a simple method for contributing reservoir volume calibration. The primary-and second-stage fracture networks across the overall SRV are the main contributions to the production, while the induced fracture network just contributes another 20% in the late producing period. We also conduct simulation with respect to different refracturing cases and find that increasing the complexity of the fracture network provides better performance than only enhancing the fracture conductivity.展开更多
To further clarify the proppant transport and placement law in multi-branched fractures induced by volume fracturing, proppant transport simulation experiments were performed with different fracture shapes, sand ratio...To further clarify the proppant transport and placement law in multi-branched fractures induced by volume fracturing, proppant transport simulation experiments were performed with different fracture shapes, sand ratios, branched fracture opening time and injection sequence of proppants in varied particle sizes. The results show that the settled proppant height increases and the placement length decreases in main fractures as the fracturing fluid diverts gradually to the branched fractures at different positions. The flow rate in branched fractures is the main factor affecting their filling. The diverion to branched fractures leads to low flow rate and poor filling of far-wellbore branched fractures. The inclined fracture wall exerts a frictional force on the proppant to slow its settlement, thus enhancing the vertical proppant distribution in the fracture. The increase of sand ratio can improve the filling of near-wellbore main fracture and far-wellbore branched fracture and also increase the settled proppant height in main fracture. Due to the limitation of fracture height, when the sand ratio increases to a certain level, the increment of fracture filling decreases. When branched fracture is always open(or extends continuously), the supporting effect on the branched fractures is the best, but the proppant placement length within the main fractures is shorter. The fractures support effect is better when it is first closed and then opened(or extends in late stage) than when it is first opened and then closed(or extends in early stage). Injecting proppants with different particle sizes in a specific sequence can improve the placement lengths of main fracture and branched fracture. Injection of proppants in an ascending order of particle size improves the near-wellbore fracture filling, to a better extent than that in a descending order of particle size.展开更多
This study extends an integrated field characterization in Eagle Ford by optimizing the numerical reservoir simulation of highly representative complex fractured systems through embedded discrete fracture modeling(EDF...This study extends an integrated field characterization in Eagle Ford by optimizing the numerical reservoir simulation of highly representative complex fractured systems through embedded discrete fracture modeling(EDFM). The bottom-hole flowing pressure was history-matched and the field production was forecasted after screening complex fracture scenarios with more than 100 000 fracture planes based on their propped-type. This work provided a greater understanding of the impact of complex-fractures proppant efficiency on the production. After compaction tables were included for each propped-type fracture group, the estimated pressure depletion showed that the effective drainage area can be smaller than the complex fracture network if modeled and screened by the EDFM method rather than unstructured gridding technique. The essential novel value of this work is the capability to couple EDFM with third-party fracture propagation simulation automatically, considering proppant intensity variation along the complex fractured systems. Thus, this work is pioneer to model complex fracture propagation and well interference accurately from fracture diagnostics and pseudo 3 D fracture propagation outcomes for multiple full wellbores to capture well completion effectiveness after myriads of sharper field simulation cases with EDFM.展开更多
Objective: Acetabular fractures are common injuries in Iran. We assess the functional outcome of open reduction and internal fixation management of displaced Complex acetabular fractures. Materials and Methods: We ana...Objective: Acetabular fractures are common injuries in Iran. We assess the functional outcome of open reduction and internal fixation management of displaced Complex acetabular fractures. Materials and Methods: We analyzed a case series of patients with open reduction and internal fixation (ORIF) for complex acetabular fractures. Two hundred patients (132 men, 68 women) in four age groups including with a mean age of 43.39 ± 6.18 years (range 20 - 59 years) and a mean follow-up of 82.34 ± 12.48 months (range 18 - 109 months) met the inclusion criteria. Functional outcome at final follow-up was graded assessed according to Harris score. Factors affecting were defined. Results: Anatomic reduction was achieved in 192 hips, imperfect in 8 and poor in none. Radiological outcome revealed excellent results in 128 (64%) hips, good in eight, fair in five and none in poor. Harris score were excellent in 139 (69.5%) hips, good in 43 (21.5%) and fair in 18 (9%) and poor in none. The anatomical reduction results had a favorable final functional outcome. (0.003) However, BMI (P Conclusion: Optimal functional and radiological outcomes have been achieved with anatomic postoperative reduction. Also experience of specialist, on time surgery and good recovery lead to receiving excellent functional outcome with at least complications.展开更多
Post-fracturing evaluation by using limited data is of great significance to continuous improvement of the fracturing programs.In this paper,a fracturing curve was divided into two stages(i.e.,prepad fluid injection a...Post-fracturing evaluation by using limited data is of great significance to continuous improvement of the fracturing programs.In this paper,a fracturing curve was divided into two stages(i.e.,prepad fluid injection and main fracturing)so as to further understand the parameters of reservoirs and artificial fractures.The brittleness and plasticity of formations were qualitatively identified by use of the statistics of formation fracture frequency,and average pressure dropping range and rate during the prepad fluid injection.The composite brittleness index was quantitatively calculated by using the energy zones in the process of fracturing.It is shown from the large-scale true triaxial physical simulation results that the complexity of fractures is reflected by the pressure fluctuation frequency and amplitude in the main fracturing curve,and combined with the brittleness and plasticity of formations,the fracture morphology far away from the well can be diagnosed.Well P,a shale gas well in SE Chongqing,was taken as an example for post-fracturing evaluation.It is shown that the shale beds are of stronger heterogeneity along the extension directions of horizontal wells,and with GR 260 API as the dividing line between brittleness and plasticity in this area,complex fracture systems tend to form in brittleness-prone formations.In Well P,half of the fractures are single fractures,so it is necessary to carry out fine subsection and turnaround fracturing so as to improve development effects.This paper provides a theoretical basis for improving the fracturing well design and increasing the effective stimulated volume in this area.展开更多
Efficient flow simulation and optimization methods of hydraulic fracture morphology in unconventional reservoirs are effective ways to enhance oil/gas recovery.Based on the connection element method(CEM)and distributi...Efficient flow simulation and optimization methods of hydraulic fracture morphology in unconventional reservoirs are effective ways to enhance oil/gas recovery.Based on the connection element method(CEM)and distribution of stimulated reservoir volume,the complex hydraulic fracture morphology was accurately described using heterogeneous node connection system.Then a new fracture connection element method(FCEM)for fluid flow in stimulated unconventional reservoirs with complex hydraulic fracture morphology was proposed.In the proposed FCEM,the arrangement of dense nodes in the stimulated area and sparse nodes in the unstimulated area ensures the calculation accuracy and efficiency.The key parameter,transmissibility,was also modified according to the strong heterogeneity of stimulated reservoirs.The finite difference and semi-analytical tracking were used to accurately solve the pressure and saturation distribution between nodes.The FCEM is validated by comparing with traditional numerical simulation method,and the results show that the bottom hole pressure simulated by the FCEM is consistent with the results from traditional numerical simulation method,and the matching rate is larger than 95%.The proposed FCEM was also used in the optimization of fracturing parameters by coupling the hydraulic fracture propagation method and intelligent optimization algorithm.The integrated intelligent optimization approach for multi-parameters,such as perforation number,perforation location,and displacement in hydraulic fracturing is proposed.The proposed approach was applied in a shale gas reservoir,and the result shows that the optimized perforation location and morphology distribution are related to the distribution of porosity/permeability.When the perforation location and displacement are optimized with the same fracture number,NPV increases by 70.58%,which greatly improves the economic benefits of unconventional reservoirs.This work provides a new way for flow simulation and optimization of hydraulic fracture morphology of multi-fractured horizontal wells in unconventional reservoirs.展开更多
文摘A precise diagnosis of the complex post-fracturing characteristics and parameter variations in tight gas reservoirs is essential for optimizing fracturing technology,enhancing treatment effectiveness,and assessing post-fracturing production capacity.Tight gas reservoirs face challenges due to the interaction between natural fractures and induced fractures.To address these issues,a theoretical model for diagnosing fractures under varying leak-off mechanisms has been developed,incorporating the closure behavior of natural fractures.This model,grounded in material balance theory,also accounts for shut-in pressure.The study derived and plotted typical G-function charts,which capture fracture behavior during closure.By superimposing the G-function in the closure phase of natural fractures with pressure derivative curves,the study explored how fracture parameters—including leak-off coefficient,fracture area,closure pressure,and closure time—impact these diagnostic charts.Findings show that variations in natural fracture flexibility,fracture area,and controlling factors influence the superimposed G-function pressure derivative curve,resulting in distinctive“concave”or“convex”patterns.Field data from Well Y in a specific tight gas reservoir were used to validate the model,confirming both its reliability and practicality.
基金Supported by the National Natural Science Foundation of China(52274014,52421002).
文摘By integrating laboratory physical modeling experiments with machine learning-based analysis of dominant factors,this study explored the feasibility of pulse hydraulic fracturing(PHF)in deep coal rocks and revealed the fracture propagation patterns and the mechanisms of pulsating loading in the process.The results show that PHF induces fatigue damage in coal matrix,significantly reducing breakdown pressure and increasing fracture network volume.Lower vertical stress differential coefficient(less than 0.31),lower peak pressure ratio(less than 0.9),higher horizontal stress differential coefficient(greater than 0.13),higher pulse amplitude ratio(greater than or equal to 0.5)and higher pulse frequency(greater than or equal to 3 Hz)effectively decrease the breakdown pressure.Conversely,higher vertical stress differential coefficient(greater than or equal to 0.31),higher pulse amplitude ratio(greater than or equal to 0.5),lower horizontal stress differential coefficient(less than or equal to 0.13),lower peak pressure ratio(less than 0.9),and lower pulse frequency(less than 3 Hz)promote the formation of a complex fracture network.Vertical stress and peak pressure are the most critical geological and engineering parameters affecting the stimulation effectiveness of PHF.The dominant mechanism varies with coal rank due to differences in geomechanical characteristics and natural fracture development.Low-rank coal primarily exhibits matrix strength degradation.High-rank coal mainly involves the activation of natural fractures and bedding planes.Medium-rank coal shows a coexistence of matrix strength degradation and micro-fracture connectivity.The PHF forms complex fracture networks through the dual mechanism of matrix strength degradation and fracture network connectivity enhancement.
文摘This study investigated the micro-sliding frictional behavior of shale in fracturing fluids under varying operational conditions using Chang 7 shale oil reservoir core samples.Through systematic micro-sliding friction experiments,the characteristics and governing mechanisms of shale friction were elucidated.Complementary analyses were conducted to characterize the mineral composition,petrophysical properties,and micromorphology of the shale samples,providing insights into the relationship between microscopic structure and frictional response.In this paper,the characteristics and variation law of shale micro-sliding friction under different types of graphite materials as additives in LGF-80(Low-damage Guar Fluid)oil flooding recoverable fracturing fluid system were mainly studied.In addition,the finite element numerical simulation experiment of hydraulic fracturing was adopted to study the influence of the friction coefficient of natural fracture surfaces on fracture propagation and formation of the fracture network.The geometric complexity of fracture networks was systematically quantified under varying frictional coefficients of natural fracture surfaces through multi-parametric characterization and morphometric analysis.The research results show that graphite micro-particles reduce friction and drag.Based on this,this paper proposes a new idea of graphite micro-particles as an additive in the LGF-80 oil flooding recoverable fracturing fluid system to reduce friction on the fracture surface.
基金supported by the Science Foundation for Young Scientists of National Natural Science Foundation of China,“Study on the Diversion and Distribution Mechanisms of Proppant for“Multi-Stage And Multi-Cluster”Fracturing by Shale Horizontal Well”(Grant No.51604050)the Chongqing Science and Technology Innovation Project for People's Livelihood,“Research&Development of Instruments for Evaluating the Migration and Distribution of Proppant for“Multi-Stage And Multi-Cluster”Fracturing by Shale Horizontal Well”(Grant No.cstc2016shmszx90003).
文摘In this paper,a large-scale experimental system was established to identify the migration and distribution laws of complex fracture proppant in shale reservoir volume fracturing.With this system,the effects of secondary fracture angle,fluid displacement,proppant concentration and size,fracturing fluid viscosity and other factors on the migration and distribution of proppant were tested,and the migration and distribution of proppant in primary/secondary fractures were analyzed.The following results were obtained.First,the fluid flow pattern in fractures transforms gradually from laminar flow into turbulent flow with the increase of fracture supporting height.Second,the migration modes of proppant in fractures mainly include suspended migration and gliding migration.Third,the distribution form of proppant in primary fractures before branching is related to secondary fracture angle,fluid displacement and proppant concentration and size,among which the fluid displacement is the most important factor.Fourth,the mass ratio of proppant in primary fractures after branching is proportional to the secondary fracture angle,fluid displacement,fracturing fluid viscosity and proppant concentration and size,and is inversely proportional to the flow ratio between secondary fractures and primary fractures.Fifth,the mass ratio of proppant in secondary fractures after branching is proportional to fluid displacement,fracturing fluid viscosity and flow ratio between secondary fractures and primary fractures,and is inversely proportional to secondary fracture angle and proppant concentration and size.Sixth,the angle at the leading edge of proppant bank in the primary fractures after branching is proportional to the proppant concentration and size and the flow ratio between secondary fractures and primary fractures,but is inversely proportional to secondary fracture angle,fluid displacement and fracturing fluid viscosity.Seventh,the angle at the leading edge of proppant bank in the secondary fractures after branching is proportional to the secondary fracture angle and the proppant concentration and size,but is inversely proportional to the fluid displacement,fracturing fluid viscosity and flow ratio between secondary fractures and primary fractures.In conclusion,the research results can provide a theoretical support for proppant optimization and program design of shale reservoir volume fracturing.
文摘Multi-stage volume fracturing of horizontal wells is the main means to develop tight gas reservoirs.Complex fracture networks of various shapes are generated around the wellbore after volume fracturing.At present,however,most of the well test models suitable for fracturing horizontal wells take all hydraulic fractures as single main fractures,which results in a large error between well test interpretation result and actual situation.As a result,the fracture network characteristic parameters of the stimulated areas cannot be obtained accurately.To this end,a well test model for complex fracture networks in tight-gas fracturing horizontal wells was established on the basis of the non-structural discrete fracture model.Then,this model was solved by using thefinite element method with combined triangular elements and linear elements.And accordingly,the well test type curves of a horizontal well under different fracture network patterns(rectangular,elliptical and hyperbolic)were prepared.Based on this,well test type curves were analyzed from the aspects of characteristics and influential factors and were compared with those obtained from the conventional single-fracture model.Finally,the new model was applied in well test interpretation of one multi-stage volume fracturing horizontal well in the gas reservoir of Permian Shan 1 formation in the Qingyang Gas Field of the Ordos Basin.And the following research results were obtained.First,the biggest difference of well test type curve between the fracture network model and the conventional single-fracture model occurs in the early stage,the characteristics offirst linearflow regime are replaced with the characteristics of pseudo-radialflow regime in the stimulated area.Second,the end time of the pseudo-radialflow regime in the stimulated area is mainly dominated by the size and shape of the stimulated area.The larger the stimulated area is,the longer the pseudo-radialflow regime lasts.As the shape of the stimulated area approaches to be elongated,the characteristics of the well test type curve obtained by the new model are more consistent with those by the single-fracture model.Third,the pressure derivative value of the pseudo-radialflow regime in the stimulated area is mainly dependent on the conductivity and density of the fracture network.The higher the density or the conductivity of fracture network in the stimulated area is,the earlier the wellbore storage effect regime ends,the lower the pressure derivative value of the pseudo-radialflow regime in the stimulated area is and the more obvious the characteristics of the horizontal line are.In conclusion,case study results confirm that the new model is reliable and practical and can provide accurate reservoir parameters as well as the size of the effectively stimulated area by volume fracturing and the conductivity of fracture network,which is conducive to evaluating the stimulation effect of volume fracturing and predicting the postfrac production performance.
基金funded by the National Natural Science Foundation of China(No.51974268)Open Fund of Key Laboratory of Ministry of Education for Improving Oil and Gas Recovery(NEPUEOR-2022-03)Research and Innovation Fund for Graduate Students of Southwest Petroleum University(No.2022KYCX005)。
文摘The oil production of the multi-fractured horizontal wells(MFHWs) declines quickly in unconventional oil reservoirs due to the fast depletion of natural energy. Gas injection has been acknowledged as an effective method to improve oil recovery factor from unconventional oil reservoirs. Hydrocarbon gas huff-n-puff becomes preferable when the CO_(2) source is limited. However, the impact of complex fracture networks and well interference on the EOR performance of multiple MFHWs is still unclear. The optimal gas huff-n-puff parameters are significant for enhancing oil recovery. This work aims to optimize the hydrocarbon gas injection and production parameters for multiple MFHWs with complex fracture networks in unconventional oil reservoirs. Firstly, the numerical model based on unstructured grids is developed to characterize the complex fracture networks and capture the dynamic fracture features.Secondly, the PVT phase behavior simulation was carried out to provide the fluid model for numerical simulation. Thirdly, the optimal parameters for hydrocarbon gas huff-n-puff were obtained. Finally, the dominant factors of hydrocarbon gas huff-n-puff under complex fracture networks are obtained by fuzzy mathematical method. Results reveal that the current pressure of hydrocarbon gas injection can achieve miscible displacement. The optimal injection and production parameters are obtained by single-factor analysis to analyze the effect of individual parameter. Gas injection time is the dominant factor of hydrocarbon gas huff-n-puff in unconventional oil reservoirs with complex fracture networks. This work can offer engineers guidance for hydrocarbon gas huff-n-puff of multiple MFHWs considering the complex fracture networks.
文摘In this paper,a series of specific studies were carried out to investigate the complex form of fracture networks and figure out the multi-scale flowing laws of nano/micro poresecomplex fracture networks-wellbore during the development of shale reservoirs by means of horizontal well fracturing.First,hydraulic fractures were induced by means of Brazilian splitting tests.Second,the forms of the hydraulic fractures inside the rock samples were observed by means of X-ray CT scanning to measure the opening of hydraulic fractures.Third,based on the multi-scale unified flowing model,morphological description of fractures and gas flowing mechanism in the matrixecomplex fracture networkewellbore,the productivity equation of single-stage horizontal well fracturing which includes diffusion,slipping and desorption was established.And fourthly,a productivity prediction model of horizontal well multi-stage fracturing in the shale reservoir was established considering the interference between the multi-stage fracturing zones and the pressure drop in the horizontal wellbore.The following results were obtained.First,hydraulic fractures are in the form of a complex network.Second,the measured opening of hydraulic fractures is in the range of 4.25-453 mm,averaging 112 mm.Third,shale gas flowing in different shapes of fracture networks follows different nonlinear flowing laws.Forth,as the fracture density in the strongly stimulated zones rises and the distribution range of the hydraulic fractures in strongly/weakly stimulated zones enlarges,gas production increases gradually.As the interference occurs in the flowing zones of fracture networks between fractured sections,the increasing amplitude of gas production rates decreases.Fifth,when the length of a simulated horizontal well is 1500 m and the half length of a fracture network in the strongly stimulated zone is 100 m,the productivity effect of stage 10 fracturing is the best.Therefore,it is necessary to control fracturing degree reasonably and optimize fracturing parameters,so as to provide a theoretical support for the optimization design of shale gas reservoir fracturing.
基金supported by the Natural Science Foundation of China (Grant No. 51490653, Basic Theoretical Research of Shale Oil and Gas Effective Development)
文摘Multi-stage hydraulic fracturing of horizontal wells is the main stimulation method in recovering gas from tight shale gas reservoirs, and stage spacing deter- mination is one of the key issues in fracturing design. The initiation and propagation of hydraulic fractures will cause stress redistribution and may activate natural fractures in the reservoir. Due to the limitation of the analytical method in calculation of induced stresses, we propose a numerical method, which incorporates the interaction of hydraulic fractures and the wellbore, and analyzes the stress distri- bution in the reservoir under different stage spacing. Simulation results indicate the following： （1） The induced stress was overestimated from the analytical method because it did not take into account the interaction between hydraulic fractures and the horizontal wellbore. （2） The hydraulic fracture had a considerable effect on the redis- tribution of stresses in the direction of the horizontal wellbore in the reservoir. The stress in the direction per- pendicular to the horizontal wellbore after hydraulic frac- turing had a minor change compared with the original in situ stress. （3） Stress interferences among fractures were greatly connected with the stage spacing and the distance from the wellbore. When the fracture length was 200 m, and the stage spacing was 50 m, the stress redistribution due to stage fracturing may divert the original stress pat- tern, which might activate natural fractures so as to generate a complex fracture network.
基金Science and Technology Cooperation Project of the CNPC-SWPU Innovation Alliance(No.2020CX010501)National Science and Technology Major ProjectNational Natural Science Foundation of China Petrochemical Joint Fund Project(U1762107)
文摘Digital rock physics(DRP)is a paramount technology to improve the economic benefits of oil and gas fields,devise more scientific oil and gas field development plans,and create digital oil and gas fields.Currently,a significant gap is present between DRP theory and practical applications.Conventional digital-core construction focuses only on simple cores,and the recognition and segmentation effect of fractures and pores of complex cores is poor.The identification of rock minerals is inaccurate,which leads to the difference between the digital and actual cores.To promote the application of DRP in developing oil and gas fields,based on the high-precision X-ray computed tomography scanning technology,the U-Net deep learning model of the full convolution neural network is used to segment the pores,fractures,and matrix from the complex rock core with natural fractures innovatively.Simultaneously,the distribution of rock minerals is divided,and the distribution of rock conditions is corrected by X-ray diffraction.A pore—fracture network model is established based on the equivalent radius,which lays the foundation for fluid seepage simulation.Finally,the accuracy of the established a digital core is verified by the porosity measured via nuclear magnetic resonance technology,which is of great significance to the development and application of DRP in oil and gas fields.
基金financial support of the National Natural Science Foundation of China(Grant No.52074332)express their gratitude to project ZR2020YQ36 supported by Shandong Provincial Science Fund for Excellent Young Scholars。
文摘Hydraulic fracturing is a key technology for the development of unconventional hydrocarbon resources.The proppant placement morphology determines the fracture conductivity,thus affecting the reservoir stimulation effect.In this paper,the proppant migration and placement within complex fractures was studied by considering the fracture wall roughness through computational fluid mechanics-discrete element method(CFD-DEM)in numerical simulation,which is a key approach to study the proppant migration and placement.The results show that the proppant placement non-uniformity,proppant migration capacity,and proppant volume filled in the far-end and the secondary branched fracture are enhanced within the rough fracture compared with those within smooth fractures.The proppant migration capacity is increased within the fracture at low inclination angles(<60°)and low approach angles(<90°),and the proppant placement area is larger in the inclined fracture than that in the vertical fracture.The rise of injection rate and fracturing fluid viscosity causes more proppants migrate to far-end or secondary fractures,resulting in a non-proppant area within the near-wellbore fracture.An increase by 1.3 times in the injection rate and 3 times in the fracturing fluid viscosity leads to a decrease by 26.6%and 27%,respectively,in the proppant placement area within the near-wellbore fracture.The staged injection with small size proppants followed by large size proppants increases the proppant placement area in the primary fracture by 13%-26%,and that with large size proppants followed by small size proppants increases the proppant placement area by 19%-25%,which is due to that the latter method facilitates filling of the secondary branched fracture.The injection location mainly affects the proppant filling degree within the near-wellbore fractures.Compared with the upper injection,the middle and lower injection is not beneficial to filling of proppants within the near-wellbore fracture.
文摘AIM: To evaluate the effectiveness and safety of complex orbital fracture reconstruction with titanium implants. METHODS: A retrospective review of 46 patients treated with complex orbital fractures reconstruction using titanium implants from January 2005 to December 2008 was conducted. The following data were recorded: age, gender, mechanism of injury, preoperative and postoperative orbital CT, visual acuity, diplopia, ocular motility and Hertel exophthalmometer. RESULTS: The most common cause was motor vehicle accident (47.8%), followed by industrial injury (30.4%). All patients had improved appearance after operation and CT scan at one week after operation showed the fracture defects of orbit and neighboring areas had been reconstructed. Forty-six cases had various degrees of enophthalmos before operation. Among them, 32 cases were completely corrected, 11 cases improved obviously and 3 cases had no improvement after operation. Thirty-six patients with visual acuity =20/60 revealed diplopia of various degrees, including 26 patients had diplopia in right ahead and/or reading positions. At the sixth month after operation, diplopia disappeared in five patients, 7 patients still had diplopia in right ahead and/or reading positions, 14 patients had diplopia in positions rather than right ahead and reading positions (<20 degrees) and ten patients had diplopia only at peripheral gazing (>20 degrees). All patients had various degrees of ocular motility disorders before operation. At the sixth month after operation, eyeball movement disorder disappeared in 9 patients, 31 patients showed improvement and 6 patients had no improvement. Complications of implant infection, rejection and displacement were not reported after operation. CONCLUSION: The application of titanium implants in the repair of complex orbital fractures greatly improves the appearance and functional results, which is a favorable material for plastic surgery of complex orbital fracture.
基金supported by the National Natural Science Foundation of China(National R&D Program for Major Research Instruments,51827804)Youth Program of National Natural Science Foundation of China(52004299)National Science Foundation for Distinguished Young Scholars(51725404)
文摘Coalbed methane(CBM)is an important unconventional natural gas.Exploitation of multilayered CBM reservoir is still facing the challenge of low production rate.Radial borehole fracturing,which integrates radial jet drilling and hydraulic fracturing,is expected to create complex fracture networks in multilayers and enhance CBM recovery.The main purpose of this paper is to investigate the mechanisms and efficacy of radial borehole fracturing in increasing CBM production in multiple layers.First,a two-phase flow and multi-scale 3 D fracture network including radial laterals,hydraulic fractures and face/butt cleats model is established,and embedded discrete fracture model(EDFM)is applied to handle the complex fracture networks.Then,effects of natural-fracture nonuniform distribution are investigated to show the advantages of targeted stimulation for radial borehole fracturing.Finally,two field CBM wells located in eastern Yunnan-western Guizhou,China were presented to illuminate the stimulation efficiency by radial borehole fracturing.The results indicated that compared with vertical well fracturing,radial borehole fracturing can achieve higher gas/water daily production rate and cumulative gas/water production,approximately 2 times higher.Targeted communications to cleats and sweet spots and flexibility in designing radial borehole parameters in different layers so as to increase fracture-network complexity and connectivity are the major reasons for production enhancement of radial borehole fracturing.Furthermore,the integration of geology-engineering is vital for the decision of radial borehole fracturing designing scheme.The key findings of this paper could provide useful insights towards understanding the capability of radial borehole fracturing in developing CBM and coal-measure gas in multiple-thin layers.
基金The authors are grateful to the financial support from China Postdoctoral Science Foundation(2022M712645)Opening Fund of Key Laboratory of Enhanced Oil Recovery(Northeast Petroleum University),Ministry of Education(NEPU-EOR-2021-03).
文摘Severe well interference through complex fracture networks(CFNs)can be observed among multi-well pads in low permeability reservoirs.The well interference analysis between multi-fractured horizontal wells(MFHWs)is vitally important for reservoir effective development.Well interference has been historically investigated by pressure transient analysis,while it has shown that rate transient analysis has great potential in well interference diagnosis.However,the impact of complex fracture networks(CFNs)on rate transient behavior of parent well and child well in unconventional reservoirs is still not clear.To further investigate,this paper develops an integrated approach combining pressure and rate transient analysis for well interference diagnosis considering CFNs.To perform multi-well simulation considering CFNs,non-intrusive embedded discrete fracture model approach was applied for coupling fracture with reservoir models.The impact of CFN including natural fractures and frac-hits on pressure and rate transient behavior in multi-well system was investigated.On a logelog plot,interference flow and compound linear flow are two new flow regimes caused by nearby producers.When both NFs and frac-hits are present in the reservoir,frac-hits have a greater impact on well#1 which contains frac-hits,and NFs have greater impact on well#3 which does not have frac-hits.For all well producing circumstances,it might be challenging to see divergence during pseudosteady state flow brought on by frac-hits on the logelog plot.Besides,when NFs occur,reservoir depletion becomes noticeable in comparison to frac-hits in pressure distribution.Application of this integrated approach demonstrates that it works well to characterize the well interference among different multi-fractured horizontal wells in a well pad.Better reservoir evaluation can be acquired based on the new features observed in the novel model,demonstrating the practicability of the proposed approach.The findings of this study can help for better evaluating well interference degree in multi-well systems combing PTA and RTA,which can reduce the uncertainty and improve the accuracy of the well interference analysis based on both field pressure and rate data.
基金supported by the National Natural Science Foundation of China(Grant Nos.51722406,61573018 and 51874335)the Shandong Provincial Natural Science Foundation(Grant JQ201808)+1 种基金the Fundamental Research Funds for the Central Universities(Grant 18CX02097A)the National Science and Technology Major Project of China(Grant 2016ZX05025001-006)
文摘In practical development of unconventional reservoirs,fracture networks are a highly conductive transport media for subsurface fluid flow.Therefore,it is crucial to clearly determine the fracture properties used in production forecast.However,it is different to calibrate the properties of fracture networks because it is an inverse problem with multi-patterns and highcomplexity of fracture distribution and inherent defect of multiplicity of solution.In this paper,in order to solve the problem,the complex fracture model is divided into two sub-systems,namely"Pattern A"and"Pattern B."In addition,the generation method is grouped into two categories.Firstly,we construct each sub-system based on the probability density function of the fracture properties.Secondly,we recombine the sub-systems into an integral complex fracture system.Based on the generation mechanism,the estimation of the complex fracture from dynamic performance and observation data can be solved as an inverse problem.In this study,the Bayesian formulation is used to quantify the uncertainty of fracture properties.To minimize observation data misfit immediately as it occurs,we optimize the updated properties by a simultaneous perturbation stochastic algorithm which requires only two measurements of the loss function.In numerical experiments,we firstly visualize that small-scale fractures significantly contribute to the flow simulation.Then,we demonstrate the suitability and effectiveness of the Bayesian formulation for calibrating the complex fracture model in the following simulation.
基金supported by National Natural Science Foundation of China(No.51674279)China Postdoctoral Science Foundation(No.2016M602227)a grant from National Science and Technology Major Project(No.2017ZX05049-006)
文摘The paper presents a novel hydraulic fracturing model for the characterization and simulation of the complex fracture network in shale gas reservoirs. We go beyond the existing method that uses planar or orthogonal conjugate fractures for representing the ＇＇complexity＇＇ of the network. Bifurcation of fractures is performed utilizing the Lindenmayer system based on fractal geometry to describe the fracture propagation pattern, density and network connectivity. Four controlling parameters are proposed to describe the details of complex fractures and stimulated reservoir volume（SRV）. The results show that due to the multilevel feature of fractal fractures, the model could provide a simple method for contributing reservoir volume calibration. The primary-and second-stage fracture networks across the overall SRV are the main contributions to the production, while the induced fracture network just contributes another 20% in the late producing period. We also conduct simulation with respect to different refracturing cases and find that increasing the complexity of the fracture network provides better performance than only enhancing the fracture conductivity.
基金Supported by the National Natural Science Foundation of China (52074332,52204024)Outstanding Youth Foundation of Shandong Province (ZR2020YQ36)China Postdoctoral Science Foundation (M710225)。
文摘To further clarify the proppant transport and placement law in multi-branched fractures induced by volume fracturing, proppant transport simulation experiments were performed with different fracture shapes, sand ratios, branched fracture opening time and injection sequence of proppants in varied particle sizes. The results show that the settled proppant height increases and the placement length decreases in main fractures as the fracturing fluid diverts gradually to the branched fractures at different positions. The flow rate in branched fractures is the main factor affecting their filling. The diverion to branched fractures leads to low flow rate and poor filling of far-wellbore branched fractures. The inclined fracture wall exerts a frictional force on the proppant to slow its settlement, thus enhancing the vertical proppant distribution in the fracture. The increase of sand ratio can improve the filling of near-wellbore main fracture and far-wellbore branched fracture and also increase the settled proppant height in main fracture. Due to the limitation of fracture height, when the sand ratio increases to a certain level, the increment of fracture filling decreases. When branched fracture is always open(or extends continuously), the supporting effect on the branched fractures is the best, but the proppant placement length within the main fractures is shorter. The fractures support effect is better when it is first closed and then opened(or extends in late stage) than when it is first opened and then closed(or extends in early stage). Injecting proppants with different particle sizes in a specific sequence can improve the placement lengths of main fracture and branched fracture. Injection of proppants in an ascending order of particle size improves the near-wellbore fracture filling, to a better extent than that in a descending order of particle size.
文摘This study extends an integrated field characterization in Eagle Ford by optimizing the numerical reservoir simulation of highly representative complex fractured systems through embedded discrete fracture modeling(EDFM). The bottom-hole flowing pressure was history-matched and the field production was forecasted after screening complex fracture scenarios with more than 100 000 fracture planes based on their propped-type. This work provided a greater understanding of the impact of complex-fractures proppant efficiency on the production. After compaction tables were included for each propped-type fracture group, the estimated pressure depletion showed that the effective drainage area can be smaller than the complex fracture network if modeled and screened by the EDFM method rather than unstructured gridding technique. The essential novel value of this work is the capability to couple EDFM with third-party fracture propagation simulation automatically, considering proppant intensity variation along the complex fractured systems. Thus, this work is pioneer to model complex fracture propagation and well interference accurately from fracture diagnostics and pseudo 3 D fracture propagation outcomes for multiple full wellbores to capture well completion effectiveness after myriads of sharper field simulation cases with EDFM.
文摘Objective: Acetabular fractures are common injuries in Iran. We assess the functional outcome of open reduction and internal fixation management of displaced Complex acetabular fractures. Materials and Methods: We analyzed a case series of patients with open reduction and internal fixation (ORIF) for complex acetabular fractures. Two hundred patients (132 men, 68 women) in four age groups including with a mean age of 43.39 ± 6.18 years (range 20 - 59 years) and a mean follow-up of 82.34 ± 12.48 months (range 18 - 109 months) met the inclusion criteria. Functional outcome at final follow-up was graded assessed according to Harris score. Factors affecting were defined. Results: Anatomic reduction was achieved in 192 hips, imperfect in 8 and poor in none. Radiological outcome revealed excellent results in 128 (64%) hips, good in eight, fair in five and none in poor. Harris score were excellent in 139 (69.5%) hips, good in 43 (21.5%) and fair in 18 (9%) and poor in none. The anatomical reduction results had a favorable final functional outcome. (0.003) However, BMI (P Conclusion: Optimal functional and radiological outcomes have been achieved with anatomic postoperative reduction. Also experience of specialist, on time surgery and good recovery lead to receiving excellent functional outcome with at least complications.
基金Project supported by the National Natural Science Funds“Mechanism of dynamic stochastic fracture control and theory of waterless fracturing for shale formations”(Grant No.51490653)the Sinopec S&T Researches“Optimal stimulation technology for shale gas formations in Fuling Block”(Grant No.P14091)the National Major S&T Projects“Demonstration of shale gas exploration and development under normal pressure in Pengshui region”(Grant No.2016ZX05061)。
文摘Post-fracturing evaluation by using limited data is of great significance to continuous improvement of the fracturing programs.In this paper,a fracturing curve was divided into two stages(i.e.,prepad fluid injection and main fracturing)so as to further understand the parameters of reservoirs and artificial fractures.The brittleness and plasticity of formations were qualitatively identified by use of the statistics of formation fracture frequency,and average pressure dropping range and rate during the prepad fluid injection.The composite brittleness index was quantitatively calculated by using the energy zones in the process of fracturing.It is shown from the large-scale true triaxial physical simulation results that the complexity of fractures is reflected by the pressure fluctuation frequency and amplitude in the main fracturing curve,and combined with the brittleness and plasticity of formations,the fracture morphology far away from the well can be diagnosed.Well P,a shale gas well in SE Chongqing,was taken as an example for post-fracturing evaluation.It is shown that the shale beds are of stronger heterogeneity along the extension directions of horizontal wells,and with GR 260 API as the dividing line between brittleness and plasticity in this area,complex fracture systems tend to form in brittleness-prone formations.In Well P,half of the fractures are single fractures,so it is necessary to carry out fine subsection and turnaround fracturing so as to improve development effects.This paper provides a theoretical basis for improving the fracturing well design and increasing the effective stimulated volume in this area.
基金supported the National Natural Science Foundation of China(No.52004033,51922007,and 51874044).
文摘Efficient flow simulation and optimization methods of hydraulic fracture morphology in unconventional reservoirs are effective ways to enhance oil/gas recovery.Based on the connection element method(CEM)and distribution of stimulated reservoir volume,the complex hydraulic fracture morphology was accurately described using heterogeneous node connection system.Then a new fracture connection element method(FCEM)for fluid flow in stimulated unconventional reservoirs with complex hydraulic fracture morphology was proposed.In the proposed FCEM,the arrangement of dense nodes in the stimulated area and sparse nodes in the unstimulated area ensures the calculation accuracy and efficiency.The key parameter,transmissibility,was also modified according to the strong heterogeneity of stimulated reservoirs.The finite difference and semi-analytical tracking were used to accurately solve the pressure and saturation distribution between nodes.The FCEM is validated by comparing with traditional numerical simulation method,and the results show that the bottom hole pressure simulated by the FCEM is consistent with the results from traditional numerical simulation method,and the matching rate is larger than 95%.The proposed FCEM was also used in the optimization of fracturing parameters by coupling the hydraulic fracture propagation method and intelligent optimization algorithm.The integrated intelligent optimization approach for multi-parameters,such as perforation number,perforation location,and displacement in hydraulic fracturing is proposed.The proposed approach was applied in a shale gas reservoir,and the result shows that the optimized perforation location and morphology distribution are related to the distribution of porosity/permeability.When the perforation location and displacement are optimized with the same fracture number,NPV increases by 70.58%,which greatly improves the economic benefits of unconventional reservoirs.This work provides a new way for flow simulation and optimization of hydraulic fracture morphology of multi-fractured horizontal wells in unconventional reservoirs.
