A monitoring system is an important guarantee of safety in a production mine. However, not all monitoring substations pass the electrical fast transient/burst （EFT/B） immunity test and the explosion-proof test simul...A monitoring system is an important guarantee of safety in a production mine. However, not all monitoring substations pass the electrical fast transient/burst （EFT/B） immunity test and the explosion-proof test simultaneously. To enhance the immunity, the values of capacitance and inductance should be increased, which are actually limited by coal mine explosion-proof standards. Hence, for the first time, an active filter was applied in an electromagnetic interference （EMI） output filter. As a result, the interference within 30 MHz clearly weakened, but the frequency spectrum had a wide range. An EMI input filter and ferrite beads were adopted to restrain higher frequency interference. An output interference spectrogram of the substation was obtained with an analyzer. The results indicate that the improved complex filtering markedly help to control interference. With the support of improved complex filtering and other enhancing immunity means about I/O ports, the substation managed to pass both the EFT/B immunity test and the explosion-proof test synchronously. We conclude that improved complex filtering is of vital importance in enhancing the electromagnetic compatibilitv （EMC） of the coal mine monitoring system.展开更多
A 3rd-order Butterworth active-RC complex band-pass filter was presented for Zig Bee(IEEE802.15.4) transceiver applications. The filter adopted cascaded complex pole stages to realize the 3 MHz bandwidth with a centre...A 3rd-order Butterworth active-RC complex band-pass filter was presented for Zig Bee(IEEE802.15.4) transceiver applications. The filter adopted cascaded complex pole stages to realize the 3 MHz bandwidth with a centre frequency of 2 MHz which was required by the Zig Bee transceiver applications. An automatic frequency tuning scheme was also designed to accommodate the performance deterioration due to the process, voltage and temperature(PVT) variations. The whole filter is implemented in a 0.18 μm standard process and occupies an area of 1.3 mm×0.6 mm. The current dissipation is 1.2 m A from a 1.8 V single power supply. Measurement results show that the image rejection ratio(IRR) of the filter is 24.1 d B with a pass-band ripple less than 0.3 d B. The adjacent channel rejection is 29.8 d B@7 MHz and alternate channel rejection 47.5 d B@12 MHz, respectively.展开更多
This letter introduces a 4th order active RC complex filter with 1.SMHz center frequency and 1MHz bandwidth. The total harmonic distortion of the filter is less than -60dB and the image rejection ratio is greater than...This letter introduces a 4th order active RC complex filter with 1.SMHz center frequency and 1MHz bandwidth. The total harmonic distortion of the filter is less than -60dB and the image rejection ratio is greater than 60dB. A novel technique is also proposed in this letter to automatically adjust the variation of the time constant. The advantages of the proposed method are its high precision and simplicity. Using 5bits control words, the tuning error is less than ±1.6%.展开更多
Dear Editor,This letter presents an improved repetitive controller(IRC) that uses a complex-coefficient filter to enhance the tracking performance of a system for periodic signals. Compared with the low-pass filter us...Dear Editor,This letter presents an improved repetitive controller(IRC) that uses a complex-coefficient filter to enhance the tracking performance of a system for periodic signals. Compared with the low-pass filter used in the conventional repetitive controller(CRC), the complex-coefficient filter causes less change in the phase and amplitude of a signal at the frequencies of the periodic signal, especially at the fundamental frequency, when the two filters have the same cutofffrequency.展开更多
A Gm-C complex filter with on-chip automatic tuning for wireless sensor networks is designed and implemented using 0.18 μm CMOS process. This filter is synthesized from a low-pass 5th-order Chebyshev RLC ladder filte...A Gm-C complex filter with on-chip automatic tuning for wireless sensor networks is designed and implemented using 0.18 μm CMOS process. This filter is synthesized from a low-pass 5th-order Chebyshev RLC ladder filter prototype by means of capacitors and fully balanced transconductors. A conventional phase-locked loop is used to realize the on-chip automatic tuning for both center frequency and bandwidth control. The filter is centered at 2 MHz with a bandwidth of 2.4 MHz. The measured results show that the filter provides more than 45 dB image rejection while the ripple in the pass-band is less than 1.2 dB. The complete filter including on-chip tuning circuit consumes 4.9 mA with 1.8 V single supply voltage.展开更多
A fifth/seventh order dual-mode OTA-C complex filter for global navigation satellite system receivers is implemented in a 0.18μm CMOS process.This filter can be configured as the narrow mode of a 4.4 MHz bandwidth ce...A fifth/seventh order dual-mode OTA-C complex filter for global navigation satellite system receivers is implemented in a 0.18μm CMOS process.This filter can be configured as the narrow mode of a 4.4 MHz bandwidth center at 4.1 MHz or the wide mode of a 22 MHz bandwidth center at 15.42 MHz.A fully differential OTA with source degeneration is used to provide sufficient linearity.Furthermore,a ring CCO based frequency tuning scheme is proposed to reduce frequency variation.The measured results show that in narrow-band mode the image rejection ratio（IMRR）is 35 dB,the filter dissipates 0.8 mA from the 1.8 V power supply,and the out-of-band rejection is 50 dB at 6 MHz offset.In wide-band mode,IMRR is 28 dB and the filter dissipates 3.2 mA.The frequency tuning error is less than±2%.展开更多
This paper presents a reconfigurable fifth-order complex Gm-C filter for different data rates in low-IF WiMAX applications.The design procedure and linearized measures to realize the complex filter are described.In or...This paper presents a reconfigurable fifth-order complex Gm-C filter for different data rates in low-IF WiMAX applications.The design procedure and linearized measures to realize the complex filter are described.In order to achieve the reconfigurability of bandwidth window,the center frequency and the cutoff frequency filter are adjusted simultaneously by changing capacitor values while keeping transconductors unchanged.Also,the filter integrates an on-chip automatic frequency tuning circuit based on a PLL.Experimental results show that it has an IRR of 32 dB,a THD of -43 dB,and an input-referred noise of 21μVrms.The chip is fabricated in 0.13μm CMOS process,occupies 0.7×1 mm2,and consumes 4.8 mA current from a 1.2 V power supply.展开更多
This paper presents a CMOS G;-C complex filter for a low-IF receiver of the IEEE802.15.4 standard.A pseudo differential OTA with reconfigurable common mode feedback and common mode feed-forward is proposed as well as ...This paper presents a CMOS G;-C complex filter for a low-IF receiver of the IEEE802.15.4 standard.A pseudo differential OTA with reconfigurable common mode feedback and common mode feed-forward is proposed as well as the frequency tuning method based on a relaxation oscillator.A detailed analysis of non-ideality of the OTA and the frequency tuning method is elaborated.The analysis and measurement results have shown that the center frequency of the complex filter could be tuned accurately.The chip was fabricated in a standard 0.35μm CMOS process,with a single 3.3 V power supply.The filter consumes 2.1 mA current,has a measured in-band group delay ripple of less than 0.16μs and an IRR larger than 28 dB at 2 MHz apart,which could meet the requirements of the IEEE802.15.4 standard.展开更多
To design approximately linear-phase complex coefficient finite impulse response （FIR） digital filters with arbitrary magnitude and group delay responses, a novel neural network approach is studied. The approach is ...To design approximately linear-phase complex coefficient finite impulse response （FIR） digital filters with arbitrary magnitude and group delay responses, a novel neural network approach is studied. The approach is based on a batch back-propagation neural network algorithm by directly minimizing the real magnitude error and phase error from the linear-phase to obtain the filter＇s coefficients. The approach can deal with both the real and complex coefficient FIR digital filters design problems. The main advantage of the proposed design method is the significant reduction in the group delay error. The effectiveness of the proposed method is illustrated with two optimal design examples.展开更多
In shallow-water areas,the marine magnetotelluric(MT)method faces a challenge in the investigation of seabed conductivity structures due to electrical and magnetic noises induced by ocean waves,which seriously contami...In shallow-water areas,the marine magnetotelluric(MT)method faces a challenge in the investigation of seabed conductivity structures due to electrical and magnetic noises induced by ocean waves,which seriously contaminate MT data.Ocean waves can affect electric and magnetic fields to different extents.In general,their influence on magnetic fields is considerably greater than that on electric fields.In this paper,a complex adaptive filter is adopted to reduce wave-induced magnetic noises in the frequency domain.The processing results of synthetic and measured MT data indicate that the proposed method can effectively reduce wave-induced magnetic noises and provide reliable apparent resistivity and phase data.展开更多
In software defined radio (SDR), sharp filters of different bandwidth are required to fine tune the desired channel. This requires different computational resources and large number of filter coefficients. This paper ...In software defined radio (SDR), sharp filters of different bandwidth are required to fine tune the desired channel. This requires different computational resources and large number of filter coefficients. This paper proposes a continuously variable bandwidth sharp finite impulse response (FIR) filter with low distortion and low complexity. For this, a fixed length FIR filter is used with two arbitrary sampling rate converters. This system can be used for both the continuous increase as well as decrease of the effective bandwidth of a filter. The low complexity and sharpness are achieved by using the frequency-response masking (FRM) approach for the design of the fixed length FIR filter. The sharp transition width leads to maximum rejection to channel interference in SDR.展开更多
A microwave photonic notch filter with a complex coefficient is proposed and demonstrated based on four wave mixing(FWM). FWM effect of two single-frequency laser beams occurs in a highly nonlinear fiber(HNLF), and mu...A microwave photonic notch filter with a complex coefficient is proposed and demonstrated based on four wave mixing(FWM). FWM effect of two single-frequency laser beams occurs in a highly nonlinear fiber(HNLF), and multi-wavelength optical signals are generated and used to generate the multi-tap of microwave photonic filter(MPF). The complex coefficient is generated by using a Fourier-domain optical processor(FD-OP) to control the amplitude and phase of the optical carrier and phase modulation sidebands. The results show that this filter can be changed from bandpass filter to notch filter by controlling the FD-OP. The center frequency of the notch filter can be continuously tuned from 5.853 GHz to 29.311 GHz with free spectral range(FSR) of 11.729 GHz. The shape of the frequency response keeps unchanged when the phase is tuned.展开更多
基金Project 50674093 supported by the National Natural Science Foundation of China
文摘A monitoring system is an important guarantee of safety in a production mine. However, not all monitoring substations pass the electrical fast transient/burst （EFT/B） immunity test and the explosion-proof test simultaneously. To enhance the immunity, the values of capacitance and inductance should be increased, which are actually limited by coal mine explosion-proof standards. Hence, for the first time, an active filter was applied in an electromagnetic interference （EMI） output filter. As a result, the interference within 30 MHz clearly weakened, but the frequency spectrum had a wide range. An EMI input filter and ferrite beads were adopted to restrain higher frequency interference. An output interference spectrogram of the substation was obtained with an analyzer. The results indicate that the improved complex filtering markedly help to control interference. With the support of improved complex filtering and other enhancing immunity means about I/O ports, the substation managed to pass both the EFT/B immunity test and the explosion-proof test synchronously. We conclude that improved complex filtering is of vital importance in enhancing the electromagnetic compatibilitv （EMC） of the coal mine monitoring system.
基金Projects(61334003,61274026) supported by the National Natural Science Foundation of ChinaProject(K5051225006) supported by the Fundamental Research Fund for the Central Universities,China
文摘A 3rd-order Butterworth active-RC complex band-pass filter was presented for Zig Bee(IEEE802.15.4) transceiver applications. The filter adopted cascaded complex pole stages to realize the 3 MHz bandwidth with a centre frequency of 2 MHz which was required by the Zig Bee transceiver applications. An automatic frequency tuning scheme was also designed to accommodate the performance deterioration due to the process, voltage and temperature(PVT) variations. The whole filter is implemented in a 0.18 μm standard process and occupies an area of 1.3 mm×0.6 mm. The current dissipation is 1.2 m A from a 1.8 V single power supply. Measurement results show that the image rejection ratio(IRR) of the filter is 24.1 d B with a pass-band ripple less than 0.3 d B. The adjacent channel rejection is 29.8 d B@7 MHz and alternate channel rejection 47.5 d B@12 MHz, respectively.
基金Supported by the Key Project of the National Natural Science Foundation of China (No.60437030) the Tianjin Natural Science Foundation (No.05YFJMJC01400).
文摘This letter introduces a 4th order active RC complex filter with 1.SMHz center frequency and 1MHz bandwidth. The total harmonic distortion of the filter is less than -60dB and the image rejection ratio is greater than 60dB. A novel technique is also proposed in this letter to automatically adjust the variation of the time constant. The advantages of the proposed method are its high precision and simplicity. Using 5bits control words, the tuning error is less than ±1.6%.
基金supported in part by the National Natural Science Foundation of China(61873348,6230 3266,62273200)JSPS(Japan Society for the Promotion of Science) KAKENHI(22H03998,23K25252)
文摘Dear Editor,This letter presents an improved repetitive controller(IRC) that uses a complex-coefficient filter to enhance the tracking performance of a system for periodic signals. Compared with the low-pass filter used in the conventional repetitive controller(CRC), the complex-coefficient filter causes less change in the phase and amplitude of a signal at the frequencies of the periodic signal, especially at the fundamental frequency, when the two filters have the same cutofffrequency.
基金Project supported by the National High Technology Research and Development Program of China(No.2007AA01Z2A7)the 5th Program of Six Talent Summits of Jiangsu Province,China.
文摘A Gm-C complex filter with on-chip automatic tuning for wireless sensor networks is designed and implemented using 0.18 μm CMOS process. This filter is synthesized from a low-pass 5th-order Chebyshev RLC ladder filter prototype by means of capacitors and fully balanced transconductors. A conventional phase-locked loop is used to realize the on-chip automatic tuning for both center frequency and bandwidth control. The filter is centered at 2 MHz with a bandwidth of 2.4 MHz. The measured results show that the filter provides more than 45 dB image rejection while the ripple in the pass-band is less than 1.2 dB. The complete filter including on-chip tuning circuit consumes 4.9 mA with 1.8 V single supply voltage.
基金supported by the National High-Tech Research and Development Program of China(No.2007AA12Z344)
文摘A fifth/seventh order dual-mode OTA-C complex filter for global navigation satellite system receivers is implemented in a 0.18μm CMOS process.This filter can be configured as the narrow mode of a 4.4 MHz bandwidth center at 4.1 MHz or the wide mode of a 22 MHz bandwidth center at 15.42 MHz.A fully differential OTA with source degeneration is used to provide sufficient linearity.Furthermore,a ring CCO based frequency tuning scheme is proposed to reduce frequency variation.The measured results show that in narrow-band mode the image rejection ratio（IMRR）is 35 dB,the filter dissipates 0.8 mA from the 1.8 V power supply,and the out-of-band rejection is 50 dB at 6 MHz offset.In wide-band mode,IMRR is 28 dB and the filter dissipates 3.2 mA.The frequency tuning error is less than±2%.
基金Project supported by the National High Technology Research and Development Program of China(No.2012AA012301)the National Natural Science Foundation of China(No.61106025)
文摘This paper presents a reconfigurable fifth-order complex Gm-C filter for different data rates in low-IF WiMAX applications.The design procedure and linearized measures to realize the complex filter are described.In order to achieve the reconfigurability of bandwidth window,the center frequency and the cutoff frequency filter are adjusted simultaneously by changing capacitor values while keeping transconductors unchanged.Also,the filter integrates an on-chip automatic frequency tuning circuit based on a PLL.Experimental results show that it has an IRR of 32 dB,a THD of -43 dB,and an input-referred noise of 21μVrms.The chip is fabricated in 0.13μm CMOS process,occupies 0.7×1 mm2,and consumes 4.8 mA current from a 1.2 V power supply.
基金Project supported by the National High Technology Research and Development Program of China(No.2008AA010701)
文摘This paper presents a CMOS G;-C complex filter for a low-IF receiver of the IEEE802.15.4 standard.A pseudo differential OTA with reconfigurable common mode feedback and common mode feed-forward is proposed as well as the frequency tuning method based on a relaxation oscillator.A detailed analysis of non-ideality of the OTA and the frequency tuning method is elaborated.The analysis and measurement results have shown that the center frequency of the complex filter could be tuned accurately.The chip was fabricated in a standard 0.35μm CMOS process,with a single 3.3 V power supply.The filter consumes 2.1 mA current,has a measured in-band group delay ripple of less than 0.16μs and an IRR larger than 28 dB at 2 MHz apart,which could meet the requirements of the IEEE802.15.4 standard.
基金supported by the National Natural Science Foundation of China(6087602250677014)+2 种基金the High-Tech Research and Development Program of China(2006AA04A104)the Hunan Provincial Natural Science Foundation of China (06JJ202407JJ5076).
文摘To design approximately linear-phase complex coefficient finite impulse response （FIR） digital filters with arbitrary magnitude and group delay responses, a novel neural network approach is studied. The approach is based on a batch back-propagation neural network algorithm by directly minimizing the real magnitude error and phase error from the linear-phase to obtain the filter＇s coefficients. The approach can deal with both the real and complex coefficient FIR digital filters design problems. The main advantage of the proposed design method is the significant reduction in the group delay error. The effectiveness of the proposed method is illustrated with two optimal design examples.
基金supported by the National Natural Science Foundation of China(Nos.91958210 and 41904075)。
文摘In shallow-water areas,the marine magnetotelluric(MT)method faces a challenge in the investigation of seabed conductivity structures due to electrical and magnetic noises induced by ocean waves,which seriously contaminate MT data.Ocean waves can affect electric and magnetic fields to different extents.In general,their influence on magnetic fields is considerably greater than that on electric fields.In this paper,a complex adaptive filter is adopted to reduce wave-induced magnetic noises in the frequency domain.The processing results of synthetic and measured MT data indicate that the proposed method can effectively reduce wave-induced magnetic noises and provide reliable apparent resistivity and phase data.
文摘In software defined radio (SDR), sharp filters of different bandwidth are required to fine tune the desired channel. This requires different computational resources and large number of filter coefficients. This paper proposes a continuously variable bandwidth sharp finite impulse response (FIR) filter with low distortion and low complexity. For this, a fixed length FIR filter is used with two arbitrary sampling rate converters. This system can be used for both the continuous increase as well as decrease of the effective bandwidth of a filter. The low complexity and sharpness are achieved by using the frequency-response masking (FRM) approach for the design of the fixed length FIR filter. The sharp transition width leads to maximum rejection to channel interference in SDR.
基金supported by the National High Technology Research and Development Program of China(863 Program)(No.2013AA014200)the National Natural Science Foundation of China(No.11444001)the Municipal Natural Science Foundation of Tianjin(No.14JCYBJC16500)
文摘A microwave photonic notch filter with a complex coefficient is proposed and demonstrated based on four wave mixing(FWM). FWM effect of two single-frequency laser beams occurs in a highly nonlinear fiber(HNLF), and multi-wavelength optical signals are generated and used to generate the multi-tap of microwave photonic filter(MPF). The complex coefficient is generated by using a Fourier-domain optical processor(FD-OP) to control the amplitude and phase of the optical carrier and phase modulation sidebands. The results show that this filter can be changed from bandpass filter to notch filter by controlling the FD-OP. The center frequency of the notch filter can be continuously tuned from 5.853 GHz to 29.311 GHz with free spectral range(FSR) of 11.729 GHz. The shape of the frequency response keeps unchanged when the phase is tuned.
