期刊文献+
共找到130篇文章
< 1 2 7 >
每页显示 20 50 100
Generalized response displacement methods for seismic analysis of underground structures with complex cross section 被引量:2
1
作者 Xu Zigang Ding Linling +2 位作者 Du Xiuli Xu Chengshun Zhuang Haiyang 《Earthquake Engineering and Engineering Vibration》 SCIE EI CSCD 2023年第4期979-993,共15页
The response displacement method(RDM)is recommended for the seismic analysis of underground structures in the transverse direction for many codes,including bases for design of structures-seismic actions for designing ... The response displacement method(RDM)is recommended for the seismic analysis of underground structures in the transverse direction for many codes,including bases for design of structures-seismic actions for designing geotechnical works(ISO 23469)and code for seismic design of urban rail transit structures(GB 50909-2014).However,there are some obvious limitations in the application of RDM.Springs and the shear stress of the soil could be approximately evaluated for the structures having a simple cross section,such as rectangular and circular structures.It is necessary to propose simplified seismic analysis methods for structures with complex cross sections.This paper refers to the idea of RDM and proposes three generalized response displacement methods(GRDM).In GRDM1,a part of the soil surrounding a structure is selected to generate a generalized underground structure with a rectangular cross section,and the same analysis model as RDM is applied to analyze the responses of the structure.In GRDM2,a hollow soil model without a generalized structure is used to compute the equivalent load caused by the relative displacement of the soil,and the soil-structure interaction model is applied to calculate the responses of the structure.In GRDM3,a continuous soil model is applied to compute the equivalent load caused by the relative displacement and shear stress of the soil,and the soil-structure interaction model is applied to analyze the responses of the structure,which is the same as the model used in GRDM2.The time-history analysis method(THAM)is used to evaluate the accuracy of the proposed simplified methods.Results show that the error of GRDM1 is about 20%,while the error is only 5%for GRDM2 and GRDM3.Among the three proposed methods,GRDM3 has obvious advantages regarding calculation efficiency and accuracy.Therefore,it is recommended to use GRDM3 for the seismic response analysis of underground structures that have conventional simple or complex cross sections. 展开更多
关键词 underground structures seismic analysis response displacement method equivalent seismic load complex cross section
在线阅读 下载PDF
Classifying rheumatoid arthritis by Traditional Chinese Medicine Zheng: a multi-center cross-sectional study 被引量:10
2
作者 Wang Weijie Tang Xiaopo +2 位作者 Wang Xinchang Jiang Quan Fan Yongsheng 《Journal of Traditional Chinese Medicine》 SCIE CAS CSCD 2019年第3期425-432,共8页
OBJECTIVE:To assess the relationship between disease symptoms and traditional Chinese medicine (TCM) syndrome (Zheng) in rheumatoid arthritis (RA) patients.METHODS:RA Patients were recruited in Guang'anmen Hospita... OBJECTIVE:To assess the relationship between disease symptoms and traditional Chinese medicine (TCM) syndrome (Zheng) in rheumatoid arthritis (RA) patients.METHODS:RA Patients were recruited in Guang'anmen Hospital,China Academy of Chinese Medical Sciences and in the Second Affiliated Hospital of Zhejiang Chinese Medical University,and diagnosed with a particular RA Zheng from their symptoms.Demographic characteristics,self-reported symptoms,and blood samples were collected from patients.All data were input into EpiData and analyzed using SPSS software.RESULTS:The study included 302 RA patients (age range:18-86 years).All patients were Chinese,and 85.1% were women.Cold and fatigue triggers were reported by 8.6% of patients,followed by triggers such as childbirth (4.3%),cold (3.0%),dampness (2.0%),menopause (1.3%),and psychentonia (0.7%).The most prevalent Zheng was dampness and heat blockage (Shire Yuzu in Chinese,SRYZ),diagnosed in 39.4% of patients (119),followed by phlegm and stagnation blockage (Tanyu Bizu,TYBZ) in 21.5%,liver and kidney deficiency (Ganshen Buzu,GSBZ) in 18.5%,dual deficiency of Qi and blood (Qixue Liangxu,QXLX) in 9.6%,cold and dampness blockage (Hanshi Bizu,HSBZ) in 6%,and wind and dampness blockage (Fengshi Bizu,FSBZ) in 5%.Increased length of time since RA diagnosis was associated with the GSBZ group.Patients diagnosed with the SRYZ Zheng had the highest disease activity score.Patients diagnosed with the QXLX Zheng had the lowest blood platelet counts;patients diagnosed with the QXLX and HSBZ Zhengs had lower C-reactive protein levels and lower health assessment questionnaire scores.Patients diagnosed with the GSBZ and QXLX Zhengs had the highest health assessment questionnaire scores.CONCLUSION:The specific Zheng was related to RA characteristics.The findings suggest that eliminating dampness,cooling the patient,and promoting blood circulation may assist in treating severe RA. 展开更多
关键词 Arthritis rheumatoid Symptoms and signs Syndrome complex cross-sectionAL studies
原文传递
Complex-rotation方法研究白矮星磁场中氢原子的光电离截面
3
作者 刘凤丽 《黑龙江大学自然科学学报》 2024年第6期711-717,共7页
利用Complex-rotation方法,结合混合的斯莱特-朗道扩展基集,在假设质子的质量无限大的条件下,计算了给定白矮星磁场范围氢原子的光电离截面。计算了新的三种束缚态向自由态跃迁的光电离截面,即2s_(0)→0^(-)、2_(p0)→(-1)^(-)和3d_(0)... 利用Complex-rotation方法,结合混合的斯莱特-朗道扩展基集,在假设质子的质量无限大的条件下,计算了给定白矮星磁场范围氢原子的光电离截面。计算了新的三种束缚态向自由态跃迁的光电离截面,即2s_(0)→0^(-)、2_(p0)→(-1)^(-)和3d_(0)→0^(-)跃迁的光电离截面,选定磁感应强度分别为0.01、0.05、0.10和0.50 a.u.。部分计算结果与参考文献中采用绝热基展开方法和通道耦合理论的计算结果进行了比较,在远离朗道阈值的能量区域显示出极好的一致性,说明本文的计算方法和技术路线的正确性和合理性。相关计算结果有助于解释具有强磁场的天体中复杂的正能谱现象,此方案可用于系统地计算光谱建模需要的数据。 展开更多
关键词 complex-rotation方法 氢原子 光电离截面 磁化的白矮星
在线阅读 下载PDF
Partial wave scattering cross sections for He-HBr collision 被引量:7
4
作者 余春日 凤尔银 +1 位作者 汪荣凯 杨向东 《Chinese Physics B》 SCIE EI CAS CSCD 2006年第11期2571-2577,共7页
A new anisotropic potential is fitted to ab initio data. The close-coupling approach is utilized to calculate state-tostate rotational excitation partial wave cross sections for elastic and inelastic collisions of He ... A new anisotropic potential is fitted to ab initio data. The close-coupling approach is utilized to calculate state-tostate rotational excitation partial wave cross sections for elastic and inelastic collisions of He atom with HBr molecule based on the fitted potential. The calculation is performed separately at the incident energies: 75, 100 and 200 meV.The tendency of the elastic and inelastic rotational excitation partial wave cross sections varying with total angular quantum number J is obtained. 展开更多
关键词 close-coupling approach partial wave cross sections He-BrH complex
原文传递
The effect of the attractive well of the potential energy surface for Ne-HC1 on rotationally inelastic partial wave cross sections 被引量:1
5
作者 余春日 史守华 +1 位作者 汪荣凯 杨向东 《Chinese Physics B》 SCIE EI CAS CSCD 2007年第11期3345-3351,共7页
An interaction potential of the Ne-HC1 van der Waals complex is obtained by utilizing the Huxley analytic potential function to fit the accurate interaction energy data, which have been computed at the coupled cluster... An interaction potential of the Ne-HC1 van der Waals complex is obtained by utilizing the Huxley analytic potential function to fit the accurate interaction energy data, which have been computed at the coupled cluster singles and doubles including connected triple excitations level and with the augmented correlation consistent polarized valence quintuple zeta basis set extended with a set of 3s3p2dlflg mid-bond functions [CCSD (T)/aug-cc-pV5Z-33211]. The close coupling calculation of state-to-state partial cross sections for collision of Ne with HC1 is first performed by employing the fitted interaction potential. This calculation is performed at the incident energies: 40, 60, 75 and 100 meV, separately. The effects of the long-range attractive and the short-range anisotropic interactions on the inelastic state-to-state partial cross sections are discussed in detail. Two maxima are present in the rotationally inelastic partial cross sections and they originate from different mechanisms. 展开更多
关键词 potential energy surface inelastic partial wave cross sections close-coupling approach Ne-HC1 complex
原文传递
复杂截面梁的一维建模及其动静力分析的局部微分求积法
6
作者 徐瑞楠 何光辉 《力学季刊》 北大核心 2025年第2期371-385,共15页
为了简化三维复杂横截面梁的几何建模并缩小计算规模,同时确保三维结构力学分析的准确性,本文提出了一种支持任意横截面几何形状的弹性直梁一维模型.为实现复杂截面梁的高效动力学与静力学分析,基于全局微分求积法建立了局部微分求积法(... 为了简化三维复杂横截面梁的几何建模并缩小计算规模,同时确保三维结构力学分析的准确性,本文提出了一种支持任意横截面几何形状的弹性直梁一维模型.为实现复杂截面梁的高效动力学与静力学分析,基于全局微分求积法建立了局部微分求积法(Local Differential Quadrature Method,LDQM),并用其对所构建的一维复杂截面梁进行了高效离散处理.大量数值算例验证了该模型和方法在地震时程响应、自由振动特性和横断面应力分析等方面的正确性.通过与三维实体有限元模型和三维板有限元模型的收敛性分析对比,检验了基于LDQM的一维复杂截面梁在位移、应力和自由振动分析中的数值收敛性.数值结果表明:所提出的基于LDQM的一维模型,较传统三维实体有限元方法具备更高的收敛速率,并以较小的系统自由度规模达到了三维板模型的精度,且结果与三维实体模型基本一致,为今后高效结构分析提供了新的思路与方法. 展开更多
关键词 复杂截面梁 一维建模 局部微分求积法 动静力分析 收敛速率
原文传递
任意多边形截面抗弯承载力程序BAPS开发与验证
7
作者 谢雪峰 《天津建设科技》 2025年第5期30-32,共3页
针对复杂截面抗弯承载力验算难题,从受弯构件承载力计算的基本原理出发,给出了通用公式,采用Excel VBA语言编写了验算程序BAPS。利用BAPS对常见构件进行了验算,并与流行商业软件进行了比较,验证了BAPS程序的正确性。
关键词 承载力 复杂截面 抗弯承载力
在线阅读 下载PDF
复杂截面箱梁悬臂浇筑内模支架设计及受力特征
8
作者 赵鑫 王熙溪 +2 位作者 应世明 张镇东 袁阳光 《工程建设》 2025年第7期69-74,共6页
为研究复杂截面箱梁悬臂浇筑施工内模支架设计方法及其施工阶段受力特征,依托西拉沐沦特大桥,提出了适用于箱梁边室和中室的内模支架设计方法,并完善了相应的复杂截面箱梁悬臂浇筑工艺流程。通过Midas Civil软件建立了内模支架的有限元... 为研究复杂截面箱梁悬臂浇筑施工内模支架设计方法及其施工阶段受力特征,依托西拉沐沦特大桥,提出了适用于箱梁边室和中室的内模支架设计方法,并完善了相应的复杂截面箱梁悬臂浇筑工艺流程。通过Midas Civil软件建立了内模支架的有限元模型,在考虑施工期荷载作用的情况下,分析了内模支架的受力特征,并结合材料强度分析与稳定性分析,验证了所提出内模支架设计方法的可行性。研究结果表明:边室支架与中室支架中心区域杆件受力水平明显高于边缘区域,因此,建议在内模支架优化设计时,适当增加中心区域杆件截面尺寸或加密布置以提高承载力。为进一步提升施工安全性,可对中室支架横梁布置形式进行适当增强。同时,在条件允许的情况下,建议通过支架预压的方式,最大限度地减少支架竖向变形对立模精度的影响。本研究结果可为复杂截面箱梁悬臂浇筑施工中内模支架的设计及优化提供参考。 展开更多
关键词 复杂截面箱梁 内模支架 设计方法 受力分析 悬臂浇筑
原文传递
复杂环境下跨河段曲线顶管施工工艺研究
9
作者 金昊 《中国高新科技》 2025年第20期128-130,共3页
随着城市化进程的加速,城市基础设施建设成为重中之重。跨河段曲线顶管施工技术在城市基础设施建设中的应用越来越广泛,尤其在需要穿越河流、铁路、公路等复杂环境时显得尤为重要。文章通过研究分析,阐述了跨河段曲线顶管施工工艺技术,... 随着城市化进程的加速,城市基础设施建设成为重中之重。跨河段曲线顶管施工技术在城市基础设施建设中的应用越来越广泛,尤其在需要穿越河流、铁路、公路等复杂环境时显得尤为重要。文章通过研究分析,阐述了跨河段曲线顶管施工工艺技术,对关键技术环节展开了分析,提出了顶管技术在复杂环境的影响因素分析及应对措施,并结合施工实际案例展开了分析和研究,为复杂环境下跨河段曲线顶管施工工艺的优化起到一定的参考作用。 展开更多
关键词 复杂环境 跨河段 曲线顶管 施工工艺
在线阅读 下载PDF
双隧双层过江通道超大断面盾构隧道纵向沉降分析
10
作者 赵永祥 孙建平 +1 位作者 裴宏宇 于方正 《路基工程》 2025年第2期196-201,共6页
结合南京纬三路过江通道复合地层特点,建立三维数值计算模型,分析软硬不均匀地层、不同上覆层厚度、不同下卧层地质条件对盾构隧道纵向沉降的影响。结果表明:当软硬不均下卧层较软侧土体弹性模量≥10 MPa时,隧道结构荷载、运营车辆荷载... 结合南京纬三路过江通道复合地层特点,建立三维数值计算模型,分析软硬不均匀地层、不同上覆层厚度、不同下卧层地质条件对盾构隧道纵向沉降的影响。结果表明:当软硬不均下卧层较软侧土体弹性模量≥10 MPa时,隧道结构荷载、运营车辆荷载引起的隧道纵向沉降较小,可不考虑不均匀沉降;当不同区段下卧层土体弹性模量相差较大,且存在弹性模量≤5 MPa土层时,隧道施工完成后易产生较大的沉降及不均匀沉降,应采取适当的工程措施减小沉降。 展开更多
关键词 复杂地质 水下施工 超大断面 盾构过江 弹性模量 工况分析 沉降控制
在线阅读 下载PDF
考虑断面耦合和越限控制的大电网新能源跨区消纳能力优化方法
11
作者 李群山 黄牧涛 +3 位作者 曾令康 魏聪颖 高素花 陈兴邦 《武汉大学学报(工学版)》 北大核心 2025年第8期1246-1255,共10页
针对新能源消纳困难和大规模新能源接入对新型电力系统电力平衡带来的挑战,将集火、水、光、储于一体的特高压复杂大电网划分为多个分区电网,从系统整体优化的视角,将目标省网内常规机组发电调减量总和最大作为目标函数,综合考虑功率平... 针对新能源消纳困难和大规模新能源接入对新型电力系统电力平衡带来的挑战,将集火、水、光、储于一体的特高压复杂大电网划分为多个分区电网,从系统整体优化的视角,将目标省网内常规机组发电调减量总和最大作为目标函数,综合考虑功率平衡、常规机组旋转备用容量、输电断面约束、省间交流断面受电计划约束、断面耦合约束等电力系统安全稳定运行约束,提出计及断面耦合和重载越限控制的复杂大电网新能源跨区消纳能力评估模型;然后分别应用单纯形法、内点法、模拟退化算法、白鲸优化算法和蜂群算法求解模型,综合计算大电网在日内未来15 min通过常规发电机组发电量调整所能达到的最大新能源发电消纳量,并提出各类型电源的综合调节优化方案。以某区域电网为例进行模型及求解方法验证,仿真结果显示,因电力系统规模庞大和断面间耦合关系复杂,启发式智能优化算法存在运行时间较长、收敛速度较慢、搜索精度不高等问题,而内点法收敛迅速、鲁棒性强、对初值的选择不敏感,具有更好的稳定性和计算效率,可为复杂大电网优化调度运行提供有效实用的支撑。 展开更多
关键词 复杂大电网 新能源消纳能力 断面耦合控制 断面重载越限 内点法 启发式智能优化算法
原文传递
COMPLEX RAY ANALYSIS OF SCATTERING FROM RAM COATED TARGETS
12
作者 阮颖铮 杜惠平 《Journal of Electronics(China)》 1993年第1期71-78,共8页
With the extension of complex ray theory(CRT)from lossless media into lossy ones,the complex ray analysis in lossy media can be constructed and effectively used in the problemsof scattering analysis of objects coated ... With the extension of complex ray theory(CRT)from lossless media into lossy ones,the complex ray analysis in lossy media can be constructed and effectively used in the problemsof scattering analysis of objects coated with radar absorbing materials(RAM).This method hassome advantages,such as simple calculation procedure,clear physical meaning,wide applicationarea etc.As an example,the radar cross-section(RCS)of conducting flat plates coated withRAM is analyzed.The results show that the theoretical predictions agree very well with theexperimental results. 展开更多
关键词 RADAR absorbing material RADAR cross-section complex RAY method
在线阅读 下载PDF
Support vector regression model for complex target RCS predicting
13
作者 Wang Gu Chen Weishi Miao Jungang 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2009年第1期65-68,共4页
The electromagnetic scattering computation has developed rapidly for many years; some computing problems for complex and coated targets cannot be solved by using the existing theory and computing models. A computing m... The electromagnetic scattering computation has developed rapidly for many years; some computing problems for complex and coated targets cannot be solved by using the existing theory and computing models. A computing model based on data is established for making up the insufficiency of theoretic models. Based on the "support vector regression method", which is formulated on the principle of minimizing a structural risk, a data model to predicate the unknown radar cross section of some appointed targets is given. Comparison between the actual data and the results of this predicting model based on support vector regression method proved that the support vector regression method is workable and with a comparative precision. 展开更多
关键词 radar cross section complex target coated target support vector regression.
在线阅读 下载PDF
An Approach to RCS Computation for Complex Targets
14
作者 Zhao Weijiang & Wang Maoguang Xidian University, Xi’an 710071, P. R. China 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 1997年第4期56-60,共5页
A practical approach for calculating the RCS (Radar Cross Section) of complex targets modeled with wire-grid-frame is presented. A way for generating a polyhedron model (facet-wedge model) with the wire-grid-frame dat... A practical approach for calculating the RCS (Radar Cross Section) of complex targets modeled with wire-grid-frame is presented. A way for generating a polyhedron model (facet-wedge model) with the wire-grid-frame data is described. For storing and reading the data of the polyhedron model in an easy way, a data structure is given. 展开更多
关键词 Radar cross section Geometry modeling complex target.
在线阅读 下载PDF
复杂受荷下盾构隧道原型结构试验平台的研发与实证 被引量:3
15
作者 柳献 刘震 +1 位作者 叶宇航 姚鸿梁 《岩土工程学报》 EI CAS CSCD 北大核心 2024年第5期927-937,共11页
盾构隧道结构在全寿命周期中往往将面临诸多复杂荷载状态,如注浆、偏载、偏转等非对称偏不利工况。为验证结构在这些复杂荷载状态下的适用性,探究结构力学性能,开展足尺原型结构试验研究往往是最为直接而有效的手段。既有原型试验主要... 盾构隧道结构在全寿命周期中往往将面临诸多复杂荷载状态,如注浆、偏载、偏转等非对称偏不利工况。为验证结构在这些复杂荷载状态下的适用性,探究结构力学性能,开展足尺原型结构试验研究往往是最为直接而有效的手段。既有原型试验主要关注隧道结构在简单对称荷载条件下的力学性能,鲜有关注复杂非对称荷载状态。为拓展原型试验的适用范围,提出了适用于不同断面盾构隧道结构的原型试验平台和用于模拟复杂荷载状态的试验荷载设计方法。该方法适用于任意加载点布置和液压站分组的试验系统,可对注浆、偏载、偏转等复杂荷载状态下结构响应进行精确模拟。通过类矩形盾构隧道、双圆隧道和圆形隧道的偏载原型结构试验研究,验证了试验平台和试验荷载设计方法的适用性。进一步针对试验关键参数的分析表明,控制目标权重系数的调整能有效满足不同的试验模拟要求;基于试验荷载设计方法优化的迭代算法能有效考虑计算模型或边界支承条件的非线性;环箍钢绞线和千斤顶的组合加载模式能将拟合误差水平降低至千斤顶加载模式的1/5,但需要删去部分加载点使试验荷载合理且适用;对于越复杂的结构和荷载,精确模拟结构状态需要的试验系统独立荷载组数越高,对试验平台的要求也越高。 展开更多
关键词 复杂受荷状态 原型试验 试验平台 试验荷载设计 断面形式
原文传递
基于渐近分析法的复杂截面梁振动分析
16
作者 宋子文 孙直 朱一超 《力学学报》 EI CAS CSCD 北大核心 2024年第2期494-505,共12页
梁结构在工程工业中发挥着重要的作用,梁的自振问题能够体现其本征动力学特性,是梁动力学分析中的基本问题.经典梁理论的提出往往基于不同的假设,文章采用渐近分析的方法,以梁的截面尺寸与长度之比为特征参数,严格地推导了三维梁结构的... 梁结构在工程工业中发挥着重要的作用,梁的自振问题能够体现其本征动力学特性,是梁动力学分析中的基本问题.经典梁理论的提出往往基于不同的假设,文章采用渐近分析的方法,以梁的截面尺寸与长度之比为特征参数,严格地推导了三维梁结构的一维等效振动分析模型.基于梁结构几何特征的参数的引入,有助于确定梁结构应力场和位移场等物理量之间的真实量级关系.渐近分析结果表明,纯弯曲变形只是细长梁振动分析中的首阶项,对于复杂截面梁结构仍然可以使用与欧拉梁模型复杂度相似的一维等效梁模型进行振动分析.以精细三维有限元的计算结果为基准,验证了所提出的一维等效梁模型用于振动分析的准确性和有效性.一维等效梁模型可以在商业有限元软件中通过自定义截面等内嵌模块便捷地实现.对比有限元软件中多种梁单元的计算结果发现,在相似的模型复杂度下,等效模型对细长梁自振频率的分析精度与稳定性显著优于在商业有限元软件中直接选择复杂梁截面使用梁单元计算的结果. 展开更多
关键词 渐近分析法 复杂截面 欧拉梁 自由振动
在线阅读 下载PDF
溃坝洪水演进一维水动力模型
17
作者 吕佳豪 侯精明 +2 位作者 李东来 荆海晓 陈光照 《山地学报》 CSCD 北大核心 2024年第1期123-131,共9页
中国是受洪水灾害影响最严重的国家之一。洪水数值模型可准确地反映洪水的演进与致灾过程。本研究针对天然河道洪水过程存在的尺度大、水流流态复杂、河道断面形式多变以及计算建模困难等问题,提出一套基于Godunov格式的有限体积法离散... 中国是受洪水灾害影响最严重的国家之一。洪水数值模型可准确地反映洪水的演进与致灾过程。本研究针对天然河道洪水过程存在的尺度大、水流流态复杂、河道断面形式多变以及计算建模困难等问题,提出一套基于Godunov格式的有限体积法离散圣维南方程组的一维水动力模型,并采用求解复杂断面水力要素之间关系的方法,提高了一维水动力模型求解的精度与效率,精确地反映了复杂断面河道的水流运动特性。将模型模拟得到的数值解与算例中的解析解或实测数据进行对比,结果表明:(1)构建的一维水动力模型模拟结果与理想算例解析解及实验实测数据吻合程度均较高,所有算例的E NS均大于0.5,说明模型具有良好的稳定性和适应性;(2)将模型应用至金沙江白格堰塞湖溃坝洪水算例中,模拟得到的流量峰值及整体洪水过程均与实测过程吻合较好,在叶巴滩和苏洼龙两个测点处E NS分别为0.633和0.812,证明了模型在实际应用中的适用性与可靠性。结果表明,开发的一维水动力模型对溃坝洪水等水流流态复杂、突发性强的洪水过程具有良好的模拟效果。本研究可为河道及溃坝洪水风险的初步、快速评估等工作提供有效的模拟支撑。 展开更多
关键词 河道水动力模型 Godunov格式 明渠水流运动过程 复杂断面处理 溃坝洪水
在线阅读 下载PDF
高品质复合功能针织面料的开发 被引量:1
18
作者 陆振兴 王泽君 +1 位作者 丁宝冷 黄华友 《针织工业》 北大核心 2024年第10期31-34,共4页
针对弹力运动面料,采用7.78tex锦纶6纱线织成面料,对面料布面情况、触感进行评估,测试其抗起球、抗钩丝、接触凉感、持续凉感与速干性能,并综合考虑后优选最佳纱线参数以及后整理助剂。最终将7.78tex高凉感复合功能锦纶6纱线搭配3.33te... 针对弹力运动面料,采用7.78tex锦纶6纱线织成面料,对面料布面情况、触感进行评估,测试其抗起球、抗钩丝、接触凉感、持续凉感与速干性能,并综合考虑后优选最佳纱线参数以及后整理助剂。最终将7.78tex高凉感复合功能锦纶6纱线搭配3.33tex氨纶,在纬编高针大圆机设备上进行织造,然后通过染色、定形、后整理等工序,制得一款高品质复合功能针织面料。结果表明,该面料抗起球、抗钩丝、接触瞬间凉感、持续凉感、吸湿速干、防紫外线性能都较为优秀,能够在多场景应用。 展开更多
关键词 针织面料 弹力 吸湿速干 凉感功能 复合功能 异型截面
原文传递
门套用复杂截面表面结皮UPVC微发泡挤出模具研制
19
作者 徐军 《新型建筑材料》 2024年第9期151-154,共4页
以门套为例,在65锥形双螺杆UPVC微发泡配方体系条件下,通过仿真设计和生产线调试验证,研制了复杂截面表面结皮微发泡挤出模具。其中,间隙式外放发泡的水冷口模结构,通过调整水冷口模板间隙的大小和流道的长短来控制物料的流动速度,进而... 以门套为例,在65锥形双螺杆UPVC微发泡配方体系条件下,通过仿真设计和生产线调试验证,研制了复杂截面表面结皮微发泡挤出模具。其中,间隙式外放发泡的水冷口模结构,通过调整水冷口模板间隙的大小和流道的长短来控制物料的流动速度,进而调节结皮厚度和制品密度;干湿定型结合的定型模中,干式定型采用反向弧度补偿发泡材料的不均匀收缩,在湿式定型段,采用浸浴式真空涡流水箱对发泡制品进行充分冷却和定型。 展开更多
关键词 UPVC微发泡 结皮发泡 复杂截面 挤出模具研制
在线阅读 下载PDF
基于DTCWT-VAE的弹道中段目标RCS识别 被引量:1
20
作者 王彩云 张慧雯 +2 位作者 王佳宁 吴钇达 常韵 《系统工程与电子技术》 EI CSCD 北大核心 2024年第7期2269-2275,共7页
针对弹道目标雷达信号易受环境影响、目标识别准确率低的问题,提出了一种基于双树复小波变换(dual-tree complex wavelet transform,DTCWT)和变分自编码器(variational autoencoder,VAE)的弹道目标雷达散射截面(radar cross section,RCS... 针对弹道目标雷达信号易受环境影响、目标识别准确率低的问题,提出了一种基于双树复小波变换(dual-tree complex wavelet transform,DTCWT)和变分自编码器(variational autoencoder,VAE)的弹道目标雷达散射截面(radar cross section,RCS)识别法。首先,采用DTCWT对弹道目标RCS动态数据进行预处理,再利用VAE提取目标的隐变量特征,最后用支持向量机(support vector machine,SVM)分类器进行识别。实验结果表明,与已有方法相比,该方法具有更高的识别概率,且鲁棒性较好。 展开更多
关键词 弹道目标 目标识别 雷达散射截面 双树复小波变换 变分自编码器
在线阅读 下载PDF
上一页 1 2 7 下一页 到第
使用帮助 返回顶部