PSⅡ core antenna complexes, CP43 and CP47, were purified from spinach (Spinacia oleracea L.) by DEAE Fractogel TSK 650S anion exchange chromatography. Their normal temperature (298 K) resonance Raman spectra were...PSⅡ core antenna complexes, CP43 and CP47, were purified from spinach (Spinacia oleracea L.) by DEAE Fractogel TSK 650S anion exchange chromatography. Their normal temperature (298 K) resonance Raman spectra were measured. The results suggest that all β carotenoids bound to CP43 and CP47 are in all trans configuration and likely in twisted conformations.展开更多
Cytochrome b_559 in photosystem Ⅱ reaction center was purified from spinach ( Spinacia oleracea L.) and rice ( Oryza sativa L.) by a rapid and simple procedure. Their low temperature fluorescence emission and e...Cytochrome b_559 in photosystem Ⅱ reaction center was purified from spinach ( Spinacia oleracea L.) and rice ( Oryza sativa L.) by a rapid and simple procedure. Their low temperature fluorescence emission and excitation spectra, ultraviolet fluorescence spectra and absolute absorption spectra were presented. The author's purification methods, which enhanced the yield of pure protein and shorted the time for isolation, have several advantages: 1. use of oxygen_evolving PSⅡ core complexes as the starting material in order to avoid disturbing from other cytochromes; 2. isocratic elution of cytochrome b_559 from a DEAE_Sephacel column for eliminating the impurity and yielding the protein in pure state; 3. a simple column procedure for removal of excess Triton X_100. Purified cytochromes b_559 from these species have similar optical spectra and mobility during gel electrophoresis under native conditions. From the results of novel electrophoresis (Tricine_SDS_PAGE), cytochrome b_559 from both spinach and rice reveal two polypeptide bands (apparent molecular weight 9 kD and 4 kD, respectively). By measuring of 77 K fluorescence spectra, it was shown that for the purified cytochrome b_559 there were two excitation peaks at 439 nm and 413 nm, and two emission peaks at 563 nm and 668 nm. This is the first indication that Cyt b_559 is able to emit fluorescence and also transfer excited electrons to chlorophyll. By the use of ultraviolet fluorescence spectra, it was demonstrated for the first time that the location of Trp residue could be in the hydrophobic transmembrane region of cytochrome b_559.展开更多
Abstract There are two extensional systems in the Xiaoqinling metamorphic core complex (XMCC). One is the detachment fault system developed along the peripheries of the XMCC, which extended in an ESE-WNW direction and...Abstract There are two extensional systems in the Xiaoqinling metamorphic core complex (XMCC). One is the detachment fault system developed along the peripheries of the XMCC, which extended in an ESE-WNW direction and whose upper plate moved towards the WNW. The other extensional system includes the retrograde shear zones and normal faults developed within the XMCC, which represent the collapse of the XMCC. Ar-Ar and K-Ar dating shows that the extension of the detachment fault system continued from 135 to 123 Ma, i.e. in the late stage of its evolution at about 127 Ma. The collapse represented by the extensional system within the XMCC was operative during 120–106 Ma, and its main activity occurred about 116 Ma ago. These suggest that the XMCC experienced two extensional stages in its evolution, i.e., the syn-orogenic regional extension and post-orogenic collapse extension.展开更多
The Louzidian metamorphic core complex (LMCC) in southern Chifeng is located on the northern margin of the North China craton. Structural analyses of the LMCC and its extensional detachment system indicate that the LM...The Louzidian metamorphic core complex (LMCC) in southern Chifeng is located on the northern margin of the North China craton. Structural analyses of the LMCC and its extensional detachment system indicate that the LMCC experienced two-stage extension. The ductile regime experienced top-to-northeast shearing extension and the brittle detachment fault underwent top-down-outwards slipping. Between these two stages, a semi-ductile regime recorded the transition from ductile to brittle. The hanging wall of the detachment fault is similar to those classic supradetachment basins in western North America. Analyses of provenance and paleocurrent directions in the basins show that there were two filling stages. In the early stage, materials came from the southwest margin of the basin and the hanging wall of the detachment system and were transported from southwest to northeast; while in the late stage, deposits were derived from the footwall of the detachment fault and transported outwards to the two sides of the core complex. Since the filling period of the basins is from the late Jurassic to the late Cretaceous and it is coeval with the extension, the two filling stages reflect the two-stage history of the detachment fault. The large-scale late Jurassic underplating in the deep crust of the Chifeng area led to thickening and heating of the middle-upper crust and trigged the extension at depths and volcanism on the surface. In the early Cretaceous the upper plate of the detachment fault moved northeastwards and sediments were transported from southwest to northeast, while in the late Cretaceous the core complex was uplifted rapidly, the original basin was separated by the uplifted core, and lower-plate-derived debris was deposited in the adjacent upper-plate basins of the detachment fault. Evidentially, the development of the supradetachment basins were controlled by the extension and in turn the fillings in the basins recorded information of the extension, which has provided new evidence for kinematic interpretation of the Louzidian core complex.展开更多
: The kinematic vorticity number and strain of the mylonitic zone related to the detachment fault increase from ESE to WNW along the moving direction of the upper plate of the Xiaoqinling metamorphic core complex (XMC...: The kinematic vorticity number and strain of the mylonitic zone related to the detachment fault increase from ESE to WNW along the moving direction of the upper plate of the Xiaoqinling metamorphic core complex (XMCC) and the geometry of quartz c-axis fabrics changes progressively from crossed girdles to single girdles in the same direction. Therefore, pure shear is dominant in the ESE part of the XMCC while simple shear becomes increasingly important towards WNW. However, the shear type does not change with the strain across the shear zone, thus the variation of shear type is of significance in indicating the formation mechanism. The granitic plutons within the XMCC came from the deep source and their emplacement was an active and forceful upwelling prior to the detachment faulting. The PTt path demonstrates that magmatism is an important cause for the formation of the XMCC. The formation mechanism of the XMCC is supposed to be active plutonism and passive detachment. Crustal thickening and magmatic doming caused necking extension with pure shear, and magmatic heating and doming resulted in detachment extension with simple shear and formed the XMCC.展开更多
The Liaonan metamorphic core complex （mcc） has a three-layer structure and is constituted by five parts, i.e. a detachment fault zone, an allochthonous upper plate and an supradetachment basin above the fault zone, ...The Liaonan metamorphic core complex （mcc） has a three-layer structure and is constituted by five parts, i.e. a detachment fault zone, an allochthonous upper plate and an supradetachment basin above the fault zone, and highly metamorphosed rocks and intrusive rocks in the lower plate. The allochthonous upper plate is mainly of Neoproterozoic and Paleozoic rocks weakly deformed and metamorphosed in pre-Indosinan stage. Above these rocks is a small-scale supradetachment basin of Cretaceous sedimentary and volcanic rocks. The lower plate is dominated by Archean TTG gneisses with minor amount of supracrustal rocks. The Archean rocks are intruded by late Mesozoic synkinematic monzogranitic and granitic plutons. Different types of fault rocks, providing clues to the evolution of the detachment fault zone, are well-preserved in the fault zone, e.g. mylonitic gneiss, mylonites, brecciated mylonites, microbreccias and pseudotachylites. Lineations in lower plate granitic intrusions have consistent orientation that indicate uniform top-to-NW shearing along the main detachment fault zone. This also provides evidence for the synkinematic characteristics of the granitic plutons in the lower plate. Structural analysis of the different parts in the mcc and isotopic dating of plutonic rocks from the lower plate and mylonitic rocks from detachment fault zone suggest that exhumation of the mcc started with regional crustal extension due to crustal block rotation and tangential shearing. The extension triggered magma formation, upwelling and emplacement. This event ended with appearance of pseudotachylite and fault gauges formed at the uppermost crustal level. U-Pb dating of single zircon grains from granitic rocks in the lower plate gives an age of 130±2.5 Ma, and biotite grains from the main detachment fault zone have ^40Ar-^39Ar ages of 108-119 Ma. Several aspects may provide constraints for the exhumation of the Liaonan mcc. These include regional extensional setting, cover/basement contact, temporal and spatial coupling of extension and magmatism, basin development and evolution of fault tectonites along detachment fault zone. We propose that the exhumation of the Liaonan mcc resulted from regional extension and thinning of crust or lithosphere in eastern North China, and accompanied with synkinematic intrusion of granitic plutons, formation of detachment fault zone, uplifting and exhumation of lower-plate rocks, and appearance of supradetachment basin.展开更多
Metamorphic core complexes are a basic structural pattern related to extensional tectonics. Several characteristics of different scales of metamorphic core complexes in the Fangshan and Yunmengshan (Beijing) , Zhongti...Metamorphic core complexes are a basic structural pattern related to extensional tectonics. Several characteristics of different scales of metamorphic core complexes in the Fangshan and Yunmengshan (Beijing) , Zhongtiaoshan (Shanxi) , and Dengfong (Henan) are examined. A three-layer model for metam orphic core complexes is suggested . The conclusion is that metam orphic core complexes are the result of multiphase intracontinental crustal extensions and are an important tectonic pattern. which exposes the basement metam orphic rocks to the ground surface in the intracontinental cover .展开更多
Widespread magmatism, metamorphic core complexes(MCCs), and significant lithospheric thinning occurred during the Mesozoic in the North China Craton(NCC). It has been suggested that the coeval exhumation of MCCs with ...Widespread magmatism, metamorphic core complexes(MCCs), and significant lithospheric thinning occurred during the Mesozoic in the North China Craton(NCC). It has been suggested that the coeval exhumation of MCCs with uniform northwest-southeast shear senses and magmatism probably resulted from a decratonization event during the retreat of the paleo-Pacific Plate. Here we used two-dimensional finite element thermomechanical numerical models to investigate critical parameters controlling the formation of MCCs under far-field extensional stress. We observed three end-member deformation modes: the MCC mode, the symmetric-dome mode, and the pure-shear mode. The MCC mode requires a Moho temperature of ≥700 ℃ and an extensional strain rate of ≥5 × 10^(-16)s^(-1), implying that the lithosphere had already thinned when the MCC was formed in the Mesozoic. Considering that the widespread MCCs have the same northwest-southeast extension direction in the NCC, we suggest that the MCCs are surface expressions of both large-scale extension and craton destruction and that rollback of the paleo-Pacific slab might be the common driving force.展开更多
This study utilizes ANSYS to establish FEM's model of metamorphic core complex,and used thermal-structure analysis to simulate metamorphic core complex's temperature field and stress field.The metamorphic core...This study utilizes ANSYS to establish FEM's model of metamorphic core complex,and used thermal-structure analysis to simulate metamorphic core complex's temperature field and stress field.The metamorphic core complex formation mechanism is discussed.The simulation results show that the temperature field change appearing as the earth surface's temperature is the lowest,and the temperature of metamorphic core complex's nucleus is the highest.The temperature field is higher along with depth increase,and the stress field change appearing as the biggest stress occurs in the nucleus.The next stress field occurs at the top of the cover.展开更多
There is a belt of metamorphic core complexes in the western margin of the Yangtze craton . The geological setting of the belt is similar to that of the Cordilleran metamorphic core complexes . A typical one in this b...There is a belt of metamorphic core complexes in the western margin of the Yangtze craton . The geological setting of the belt is similar to that of the Cordilleran metamorphic core complexes . A typical one in this belt is the Jianglang metamorphic core complex , which has a configuration consisting of three layers : a core complex consisting of Mesoproterozoic schist sequence . a ductile middle slab consisting of Paleozoic meta- sedimentary -basalt characterized by the development of ' folding layer' and an upper cover consisting of Xikang Group which has suffered both buckling and flattening . A detachment fault developed along the contact boundary between the cover and basement causes the omission of Upper Sinian and Cambrian at the base of cover . A lot of normal ductile shear zones developed in the cover causes the thinning of it . All the features show that the early extension results in the thinning of crust , but the formation of the dome and exposure of basement rocks may be the results of superimposing of the E-W directed contraction and the following southward thrusting during Indosinian to Yanshanian orogeny . Syntectonic plutonism and pervasive thermo - metamor-phism in the cover suggest that the thermal uplift also causes the uplift of the MCC .展开更多
Identifying deformational mechanisms and associated structures at various scales,ranging from regional-scale structures to microscopic fabric,is crucial for the assessment of tectonic development.Thirty-three samples ...Identifying deformational mechanisms and associated structures at various scales,ranging from regional-scale structures to microscopic fabric,is crucial for the assessment of tectonic development.Thirty-three samples were taken from the Qazzaz metamorphic core complex to estimate the finite strain for felsic and mafic minerals.These samples included gneisses rocks,monzogranite,and metavolcano-sedimentary rocks for both the Thalbah and Bayda groups.Using the Rf/j and Fry methods,the axial ratios(XZ)range about 2.20 to 7.10 and 1.90 to 9.10,respectively.For various rock units,the strain measurements show moderate to highly deformation.Most of the observed samples show shallow WNW dipping along a N to WNW trend of finite strain(X).The short axes(Z)based to be subvertical foliation related with a subhorizontal foliation.The results demonstrate that contacts generated at semi-brittle to ductile deformation and that the strain of magnitude has the same value for different lithologic units.It concluded that nappe generation in orogens results from pure shear deformation.展开更多
Even though light is the unique source of enengy forphotosynthesis,it can also be hannful to plant,Photoin-hibition occurs when light energy absorption largely ex-ceeds the energy consumption of photosynthetic reactio...Even though light is the unique source of enengy forphotosynthesis,it can also be hannful to plant,Photoin-hibition occurs when light energy absorption largely ex-ceeds the energy consumption of photosynthetic reactions.Today,the mechanisnu of photoinhibition has become amajor topic of photosynthesis research.It is generally ae-cepted that PS IⅡis affected predominantly by photounhi-bition[1],which causes a loss of electron transfer caparityand oxygen evolution activity,bleaching of pigment,degradation of D,and other proteins,croes-linking be-tween polypeptidesi.展开更多
The reaction of a ruthenium carbide complex RuCl2（C：）（PCy3）2 with [H（Et2O）x]＋[BF4]- at a molar ratio of 1：2 produced a two-core ruthenium carbene complex, {[RuCl（=CHPCy3）（PCy3）]2（μ-Cl）3}＋·[BF4]-,...The reaction of a ruthenium carbide complex RuCl2（C：）（PCy3）2 with [H（Et2O）x]＋[BF4]- at a molar ratio of 1：2 produced a two-core ruthenium carbene complex, {[RuCl（=CHPCy3）（PCy3）]2（μ-Cl）3}＋·[BF4]-, in the form of a yellow-green crystalline solid in a yield of 94%. This two-core ruthenium complex is a selective catalyst for ring closing metathesis of unsubstituted terminal dienes. More importantly, no isomerized byproduct was observed for N-substrates when the two-core ruthenium complex was used as the catalyst at an elevated temperature（137 °C）, indicating that the complex is a chemo-selective catalyst for ring closing metathesis reactions.展开更多
Digital rock physics(DRP)is a paramount technology to improve the economic benefits of oil and gas fields,devise more scientific oil and gas field development plans,and create digital oil and gas fields.Currently,a si...Digital rock physics(DRP)is a paramount technology to improve the economic benefits of oil and gas fields,devise more scientific oil and gas field development plans,and create digital oil and gas fields.Currently,a significant gap is present between DRP theory and practical applications.Conventional digital-core construction focuses only on simple cores,and the recognition and segmentation effect of fractures and pores of complex cores is poor.The identification of rock minerals is inaccurate,which leads to the difference between the digital and actual cores.To promote the application of DRP in developing oil and gas fields,based on the high-precision X-ray computed tomography scanning technology,the U-Net deep learning model of the full convolution neural network is used to segment the pores,fractures,and matrix from the complex rock core with natural fractures innovatively.Simultaneously,the distribution of rock minerals is divided,and the distribution of rock conditions is corrected by X-ray diffraction.A pore—fracture network model is established based on the equivalent radius,which lays the foundation for fluid seepage simulation.Finally,the accuracy of the established a digital core is verified by the porosity measured via nuclear magnetic resonance technology,which is of great significance to the development and application of DRP in oil and gas fields.展开更多
The structure and kinetics of the complex formed by hyaluronic acid(HA) and poly(L-lysine)(PLL) were studied by timeresolved laser light scattering, TEM, and AFM. Because HA has a hydrophilic backbone, the complexes f...The structure and kinetics of the complex formed by hyaluronic acid(HA) and poly(L-lysine)(PLL) were studied by timeresolved laser light scattering, TEM, and AFM. Because HA has a hydrophilic backbone, the complexes formed by HA and PLL are different from those formed by oppositely charged polyelectrolytes both having hydrophobic backbones. Instead of forming strong aggregates and even precipitates, the complex in the presence of excess HA is stable in the studied time period. More importantly, the complex spontaneously forms core-corona structure by the rearrangement of HA chains. The core is composed of complex rich of PLL and the corona is mainly HA. Further analysis shows that the hydrogen bond formed by HA creates a barrier hindering the further relaxation of HA chains. The automatic formation of core-corona structure by PLL/HA is helpful not only to understand the relaxation of polyelectrolyte in complex, but also to develop drug carriers with desirable properties.展开更多
In order to improve the efficiency of the fingerprint core location algorithm, a fingerprint core location method using sliding window on the basis of core location algorithm with the complex filter was proposed. The ...In order to improve the efficiency of the fingerprint core location algorithm, a fingerprint core location method using sliding window on the basis of core location algorithm with the complex filter was proposed. The local region of the fingerprint image was extracted by a fixed-size window sliding in the region of the fingerprint image, and the selected local region by window as the calculation object is used to detect the core. The experiment results show that the method cannot only effectively detect fingerprint core, but also improve the efficiency of the detection algorithm comparing with the global fingerprint core location detection algorithm.展开更多
Sphere-shape Eu（DBM）3Phen@Si02 nanoparticles were fabricated by employing a modified alkaline catalyzed hydrolysis and precipitation method. The silica coated on the particles surface was obtained by means of hydrol...Sphere-shape Eu（DBM）3Phen@Si02 nanoparticles were fabricated by employing a modified alkaline catalyzed hydrolysis and precipitation method. The silica coated on the particles surface was obtained by means of hydrolysis and condensation of tetraethyl orthosilicate （TEOS）. In this study, the particles morphology was analyzed by scanning electron microscopy （SEM） and the surface composition of samples was characterized by X-ray diffraction （XRD） and Fourier transform infrared spectroscopy （FT-IR）. It is confirmed that the Si02 shell has been coated on the rare earth complexes successfully. Moreover, the near-infrared photoluminescence emission analysis on the nanoparticles showed that the SiO2 shell would increase the luminescence intensity of Eu（DBM）3Phen. This is primarily due to the reason that SiO2 shell with chemical inertness can effectively reduce the ion Eu3~ non-radiation transition probabilities, as well as the probability of rare earth luminescence quenching caused by the external medium.展开更多
The problem of increasing computation in pace with the growth of dimension is discussed for arbitrary dimensional frequency estimation of complex sinusoid signals. The conception of matrix core, the form of which do...The problem of increasing computation in pace with the growth of dimension is discussed for arbitrary dimensional frequency estimation of complex sinusoid signals. The conception of matrix core, the form of which doesnt change with dimension, is put forward. The deduced estimation formula shows that a N dimensional frequency estimation could be obtained by N one dimensional calculations. Obviously, while dimension increases, this method could reduce much computation.展开更多
文摘PSⅡ core antenna complexes, CP43 and CP47, were purified from spinach (Spinacia oleracea L.) by DEAE Fractogel TSK 650S anion exchange chromatography. Their normal temperature (298 K) resonance Raman spectra were measured. The results suggest that all β carotenoids bound to CP43 and CP47 are in all trans configuration and likely in twisted conformations.
文摘Cytochrome b_559 in photosystem Ⅱ reaction center was purified from spinach ( Spinacia oleracea L.) and rice ( Oryza sativa L.) by a rapid and simple procedure. Their low temperature fluorescence emission and excitation spectra, ultraviolet fluorescence spectra and absolute absorption spectra were presented. The author's purification methods, which enhanced the yield of pure protein and shorted the time for isolation, have several advantages: 1. use of oxygen_evolving PSⅡ core complexes as the starting material in order to avoid disturbing from other cytochromes; 2. isocratic elution of cytochrome b_559 from a DEAE_Sephacel column for eliminating the impurity and yielding the protein in pure state; 3. a simple column procedure for removal of excess Triton X_100. Purified cytochromes b_559 from these species have similar optical spectra and mobility during gel electrophoresis under native conditions. From the results of novel electrophoresis (Tricine_SDS_PAGE), cytochrome b_559 from both spinach and rice reveal two polypeptide bands (apparent molecular weight 9 kD and 4 kD, respectively). By measuring of 77 K fluorescence spectra, it was shown that for the purified cytochrome b_559 there were two excitation peaks at 439 nm and 413 nm, and two emission peaks at 563 nm and 668 nm. This is the first indication that Cyt b_559 is able to emit fluorescence and also transfer excited electrons to chlorophyll. By the use of ultraviolet fluorescence spectra, it was demonstrated for the first time that the location of Trp residue could be in the hydrophobic transmembrane region of cytochrome b_559.
文摘Abstract There are two extensional systems in the Xiaoqinling metamorphic core complex (XMCC). One is the detachment fault system developed along the peripheries of the XMCC, which extended in an ESE-WNW direction and whose upper plate moved towards the WNW. The other extensional system includes the retrograde shear zones and normal faults developed within the XMCC, which represent the collapse of the XMCC. Ar-Ar and K-Ar dating shows that the extension of the detachment fault system continued from 135 to 123 Ma, i.e. in the late stage of its evolution at about 127 Ma. The collapse represented by the extensional system within the XMCC was operative during 120–106 Ma, and its main activity occurred about 116 Ma ago. These suggest that the XMCC experienced two extensional stages in its evolution, i.e., the syn-orogenic regional extension and post-orogenic collapse extension.
基金supported by the National Natural Science Foundation of China(grant 40102017)the Doctoral Program of Higher Education(grant 2000000128).
文摘The Louzidian metamorphic core complex (LMCC) in southern Chifeng is located on the northern margin of the North China craton. Structural analyses of the LMCC and its extensional detachment system indicate that the LMCC experienced two-stage extension. The ductile regime experienced top-to-northeast shearing extension and the brittle detachment fault underwent top-down-outwards slipping. Between these two stages, a semi-ductile regime recorded the transition from ductile to brittle. The hanging wall of the detachment fault is similar to those classic supradetachment basins in western North America. Analyses of provenance and paleocurrent directions in the basins show that there were two filling stages. In the early stage, materials came from the southwest margin of the basin and the hanging wall of the detachment system and were transported from southwest to northeast; while in the late stage, deposits were derived from the footwall of the detachment fault and transported outwards to the two sides of the core complex. Since the filling period of the basins is from the late Jurassic to the late Cretaceous and it is coeval with the extension, the two filling stages reflect the two-stage history of the detachment fault. The large-scale late Jurassic underplating in the deep crust of the Chifeng area led to thickening and heating of the middle-upper crust and trigged the extension at depths and volcanism on the surface. In the early Cretaceous the upper plate of the detachment fault moved northeastwards and sediments were transported from southwest to northeast, while in the late Cretaceous the core complex was uplifted rapidly, the original basin was separated by the uplifted core, and lower-plate-derived debris was deposited in the adjacent upper-plate basins of the detachment fault. Evidentially, the development of the supradetachment basins were controlled by the extension and in turn the fillings in the basins recorded information of the extension, which has provided new evidence for kinematic interpretation of the Louzidian core complex.
文摘: The kinematic vorticity number and strain of the mylonitic zone related to the detachment fault increase from ESE to WNW along the moving direction of the upper plate of the Xiaoqinling metamorphic core complex (XMCC) and the geometry of quartz c-axis fabrics changes progressively from crossed girdles to single girdles in the same direction. Therefore, pure shear is dominant in the ESE part of the XMCC while simple shear becomes increasingly important towards WNW. However, the shear type does not change with the strain across the shear zone, thus the variation of shear type is of significance in indicating the formation mechanism. The granitic plutons within the XMCC came from the deep source and their emplacement was an active and forceful upwelling prior to the detachment faulting. The PTt path demonstrates that magmatism is an important cause for the formation of the XMCC. The formation mechanism of the XMCC is supposed to be active plutonism and passive detachment. Crustal thickening and magmatic doming caused necking extension with pure shear, and magmatic heating and doming resulted in detachment extension with simple shear and formed the XMCC.
基金supported by the National Natural Science Foundation of China(Grant Nos.40472105,40510104086 and 40272084)the Specialized Research Fund for the Doctoral Program of Higher Education of China(Grant No.20040491003).
文摘The Liaonan metamorphic core complex （mcc） has a three-layer structure and is constituted by five parts, i.e. a detachment fault zone, an allochthonous upper plate and an supradetachment basin above the fault zone, and highly metamorphosed rocks and intrusive rocks in the lower plate. The allochthonous upper plate is mainly of Neoproterozoic and Paleozoic rocks weakly deformed and metamorphosed in pre-Indosinan stage. Above these rocks is a small-scale supradetachment basin of Cretaceous sedimentary and volcanic rocks. The lower plate is dominated by Archean TTG gneisses with minor amount of supracrustal rocks. The Archean rocks are intruded by late Mesozoic synkinematic monzogranitic and granitic plutons. Different types of fault rocks, providing clues to the evolution of the detachment fault zone, are well-preserved in the fault zone, e.g. mylonitic gneiss, mylonites, brecciated mylonites, microbreccias and pseudotachylites. Lineations in lower plate granitic intrusions have consistent orientation that indicate uniform top-to-NW shearing along the main detachment fault zone. This also provides evidence for the synkinematic characteristics of the granitic plutons in the lower plate. Structural analysis of the different parts in the mcc and isotopic dating of plutonic rocks from the lower plate and mylonitic rocks from detachment fault zone suggest that exhumation of the mcc started with regional crustal extension due to crustal block rotation and tangential shearing. The extension triggered magma formation, upwelling and emplacement. This event ended with appearance of pseudotachylite and fault gauges formed at the uppermost crustal level. U-Pb dating of single zircon grains from granitic rocks in the lower plate gives an age of 130±2.5 Ma, and biotite grains from the main detachment fault zone have ^40Ar-^39Ar ages of 108-119 Ma. Several aspects may provide constraints for the exhumation of the Liaonan mcc. These include regional extensional setting, cover/basement contact, temporal and spatial coupling of extension and magmatism, basin development and evolution of fault tectonites along detachment fault zone. We propose that the exhumation of the Liaonan mcc resulted from regional extension and thinning of crust or lithosphere in eastern North China, and accompanied with synkinematic intrusion of granitic plutons, formation of detachment fault zone, uplifting and exhumation of lower-plate rocks, and appearance of supradetachment basin.
文摘Metamorphic core complexes are a basic structural pattern related to extensional tectonics. Several characteristics of different scales of metamorphic core complexes in the Fangshan and Yunmengshan (Beijing) , Zhongtiaoshan (Shanxi) , and Dengfong (Henan) are examined. A three-layer model for metam orphic core complexes is suggested . The conclusion is that metam orphic core complexes are the result of multiphase intracontinental crustal extensions and are an important tectonic pattern. which exposes the basement metam orphic rocks to the ground surface in the intracontinental cover .
基金supported by the National Natural Science Foundation of China(Grant No.41774112)。
文摘Widespread magmatism, metamorphic core complexes(MCCs), and significant lithospheric thinning occurred during the Mesozoic in the North China Craton(NCC). It has been suggested that the coeval exhumation of MCCs with uniform northwest-southeast shear senses and magmatism probably resulted from a decratonization event during the retreat of the paleo-Pacific Plate. Here we used two-dimensional finite element thermomechanical numerical models to investigate critical parameters controlling the formation of MCCs under far-field extensional stress. We observed three end-member deformation modes: the MCC mode, the symmetric-dome mode, and the pure-shear mode. The MCC mode requires a Moho temperature of ≥700 ℃ and an extensional strain rate of ≥5 × 10^(-16)s^(-1), implying that the lithosphere had already thinned when the MCC was formed in the Mesozoic. Considering that the widespread MCCs have the same northwest-southeast extension direction in the NCC, we suggest that the MCCs are surface expressions of both large-scale extension and craton destruction and that rollback of the paleo-Pacific slab might be the common driving force.
文摘This study utilizes ANSYS to establish FEM's model of metamorphic core complex,and used thermal-structure analysis to simulate metamorphic core complex's temperature field and stress field.The metamorphic core complex formation mechanism is discussed.The simulation results show that the temperature field change appearing as the earth surface's temperature is the lowest,and the temperature of metamorphic core complex's nucleus is the highest.The temperature field is higher along with depth increase,and the stress field change appearing as the biggest stress occurs in the nucleus.The next stress field occurs at the top of the cover.
基金The study is supported by the key project of science and technology of the Ministry of Geology and Mineral Resources (NO .85-01-005-1 )
文摘There is a belt of metamorphic core complexes in the western margin of the Yangtze craton . The geological setting of the belt is similar to that of the Cordilleran metamorphic core complexes . A typical one in this belt is the Jianglang metamorphic core complex , which has a configuration consisting of three layers : a core complex consisting of Mesoproterozoic schist sequence . a ductile middle slab consisting of Paleozoic meta- sedimentary -basalt characterized by the development of ' folding layer' and an upper cover consisting of Xikang Group which has suffered both buckling and flattening . A detachment fault developed along the contact boundary between the cover and basement causes the omission of Upper Sinian and Cambrian at the base of cover . A lot of normal ductile shear zones developed in the cover causes the thinning of it . All the features show that the early extension results in the thinning of crust , but the formation of the dome and exposure of basement rocks may be the results of superimposing of the E-W directed contraction and the following southward thrusting during Indosinian to Yanshanian orogeny . Syntectonic plutonism and pervasive thermo - metamor-phism in the cover suggest that the thermal uplift also causes the uplift of the MCC .
基金supported and funded by the Researchers Supporting Project(Project No.RSPD2024R781),King Saud University,Riyadh,Saudi Arabia。
文摘Identifying deformational mechanisms and associated structures at various scales,ranging from regional-scale structures to microscopic fabric,is crucial for the assessment of tectonic development.Thirty-three samples were taken from the Qazzaz metamorphic core complex to estimate the finite strain for felsic and mafic minerals.These samples included gneisses rocks,monzogranite,and metavolcano-sedimentary rocks for both the Thalbah and Bayda groups.Using the Rf/j and Fry methods,the axial ratios(XZ)range about 2.20 to 7.10 and 1.90 to 9.10,respectively.For various rock units,the strain measurements show moderate to highly deformation.Most of the observed samples show shallow WNW dipping along a N to WNW trend of finite strain(X).The short axes(Z)based to be subvertical foliation related with a subhorizontal foliation.The results demonstrate that contacts generated at semi-brittle to ductile deformation and that the strain of magnitude has the same value for different lithologic units.It concluded that nappe generation in orogens results from pure shear deformation.
基金The State Key Basic Researchand Development Plan(G1998010100)CAS special financial(STZ97_2_07)
文摘Even though light is the unique source of enengy forphotosynthesis,it can also be hannful to plant,Photoin-hibition occurs when light energy absorption largely ex-ceeds the energy consumption of photosynthetic reactions.Today,the mechanisnu of photoinhibition has become amajor topic of photosynthesis research.It is generally ae-cepted that PS IⅡis affected predominantly by photounhi-bition[1],which causes a loss of electron transfer caparityand oxygen evolution activity,bleaching of pigment,degradation of D,and other proteins,croes-linking be-tween polypeptidesi.
基金Supported by the National Natural Science Foundation of China(No.20872108)
文摘The reaction of a ruthenium carbide complex RuCl2（C：）（PCy3）2 with [H（Et2O）x]＋[BF4]- at a molar ratio of 1：2 produced a two-core ruthenium carbene complex, {[RuCl（=CHPCy3）（PCy3）]2（μ-Cl）3}＋·[BF4]-, in the form of a yellow-green crystalline solid in a yield of 94%. This two-core ruthenium complex is a selective catalyst for ring closing metathesis of unsubstituted terminal dienes. More importantly, no isomerized byproduct was observed for N-substrates when the two-core ruthenium complex was used as the catalyst at an elevated temperature（137 °C）, indicating that the complex is a chemo-selective catalyst for ring closing metathesis reactions.
基金Science and Technology Cooperation Project of the CNPC-SWPU Innovation Alliance(No.2020CX010501)National Science and Technology Major ProjectNational Natural Science Foundation of China Petrochemical Joint Fund Project(U1762107)
文摘Digital rock physics(DRP)is a paramount technology to improve the economic benefits of oil and gas fields,devise more scientific oil and gas field development plans,and create digital oil and gas fields.Currently,a significant gap is present between DRP theory and practical applications.Conventional digital-core construction focuses only on simple cores,and the recognition and segmentation effect of fractures and pores of complex cores is poor.The identification of rock minerals is inaccurate,which leads to the difference between the digital and actual cores.To promote the application of DRP in developing oil and gas fields,based on the high-precision X-ray computed tomography scanning technology,the U-Net deep learning model of the full convolution neural network is used to segment the pores,fractures,and matrix from the complex rock core with natural fractures innovatively.Simultaneously,the distribution of rock minerals is divided,and the distribution of rock conditions is corrected by X-ray diffraction.A pore—fracture network model is established based on the equivalent radius,which lays the foundation for fluid seepage simulation.Finally,the accuracy of the established a digital core is verified by the porosity measured via nuclear magnetic resonance technology,which is of great significance to the development and application of DRP in oil and gas fields.
基金financially supported by the National Natural Science Foundation of China (No. 21574002)
文摘The structure and kinetics of the complex formed by hyaluronic acid(HA) and poly(L-lysine)(PLL) were studied by timeresolved laser light scattering, TEM, and AFM. Because HA has a hydrophilic backbone, the complexes formed by HA and PLL are different from those formed by oppositely charged polyelectrolytes both having hydrophobic backbones. Instead of forming strong aggregates and even precipitates, the complex in the presence of excess HA is stable in the studied time period. More importantly, the complex spontaneously forms core-corona structure by the rearrangement of HA chains. The core is composed of complex rich of PLL and the corona is mainly HA. Further analysis shows that the hydrogen bond formed by HA creates a barrier hindering the further relaxation of HA chains. The automatic formation of core-corona structure by PLL/HA is helpful not only to understand the relaxation of polyelectrolyte in complex, but also to develop drug carriers with desirable properties.
基金Supported in part by the National Natural Science Foundation of China(61301091)the Natural Science Basic Research Plan in Shaanxi Province of China(2015JQ6262)+1 种基金the Open Foundation of State Key Laboratory of Information Security(2015-MS-14)the New Star Team of Xi’an University of Posts&Telecommunications
文摘In order to improve the efficiency of the fingerprint core location algorithm, a fingerprint core location method using sliding window on the basis of core location algorithm with the complex filter was proposed. The local region of the fingerprint image was extracted by a fixed-size window sliding in the region of the fingerprint image, and the selected local region by window as the calculation object is used to detect the core. The experiment results show that the method cannot only effectively detect fingerprint core, but also improve the efficiency of the detection algorithm comparing with the global fingerprint core location detection algorithm.
基金financial support from the National Natural Science Foundation of China (No. 60972134, No. 51205137)the Fundamental Research Funds for the Central Universities with grant no. 2012ZM0067
文摘Sphere-shape Eu（DBM）3Phen@Si02 nanoparticles were fabricated by employing a modified alkaline catalyzed hydrolysis and precipitation method. The silica coated on the particles surface was obtained by means of hydrolysis and condensation of tetraethyl orthosilicate （TEOS）. In this study, the particles morphology was analyzed by scanning electron microscopy （SEM） and the surface composition of samples was characterized by X-ray diffraction （XRD） and Fourier transform infrared spectroscopy （FT-IR）. It is confirmed that the Si02 shell has been coated on the rare earth complexes successfully. Moreover, the near-infrared photoluminescence emission analysis on the nanoparticles showed that the SiO2 shell would increase the luminescence intensity of Eu（DBM）3Phen. This is primarily due to the reason that SiO2 shell with chemical inertness can effectively reduce the ion Eu3~ non-radiation transition probabilities, as well as the probability of rare earth luminescence quenching caused by the external medium.
文摘The problem of increasing computation in pace with the growth of dimension is discussed for arbitrary dimensional frequency estimation of complex sinusoid signals. The conception of matrix core, the form of which doesnt change with dimension, is put forward. The deduced estimation formula shows that a N dimensional frequency estimation could be obtained by N one dimensional calculations. Obviously, while dimension increases, this method could reduce much computation.
