[Objective] This paper aims to study a new method of extracting pumpkin polysaccharide from pumpkin. Single factor experiments were conducted to examine the effects of extracting time,temperature,the solid-liquid rati...[Objective] This paper aims to study a new method of extracting pumpkin polysaccharide from pumpkin. Single factor experiments were conducted to examine the effects of extracting time,temperature,the solid-liquid ratio and pH value on the extraction yield of polysaccharide from pumpkin. [Method] The best enzyme ratio and extraction conditions for complex enzymes extraction were determined through orthogonal tests. Scavenging ·OH and O-2 activities of pumpkin polysaccharides were also investigated by salicylic acid and improved self-oxidation of o-pheno methods respectively. [Results] The results showed that the biggest extraction yield of polysaccharide from pumpkin can be got when adding 1% cellulose enzyme,1.5% pectinase,1.0% papain and Na2HPO4-citric acid buffer solution (pH was 4.6),and oscillating for 30 min under water at 40 ℃ with the solid-liquid ratio of 1:30. In addition,pumpkin polysaccharides had a strong activity of eliminating ·OH,but very weak activity to scavenge O-2. [Conclusion] This study provided basic data for research and application of Pumpkin polysaccharide.展开更多
The effects of the calorimetric buffer solutions were investigated while the two colorimetric reactions of AI-ferron complex and Fe-ferron complex occurred individually, and the effects of the testing wavelength and t...The effects of the calorimetric buffer solutions were investigated while the two colorimetric reactions of AI-ferron complex and Fe-ferron complex occurred individually, and the effects of the testing wavelength and the pH of the solutions were also investigated. A timed complexatian colorimetric analysis method of Al-Fe-ferron in view of the total concentration of {AI + Fe} was then established to determine the species distribution of polymeric Al-Fe. The testing wavelength was recommended at 362 net and the testing pH value was 5. With a comparison of the ratios of n(Al)/n(Fe), the standard adsorption curves of the polymeric Al-Fe solutions were derived from the experimental results. Furthermore, the solutions' composition were carious in both the molar n(Al)/n(Fe) ratios, i.e. 0/0, 5/5, 9/1 and 0/10, and the concentrations associated with the total ( Al + Fe which ranged from 10(-5) to 10(-4) mol/L..展开更多
In this paper, the improved complex variable moving least-squares （ICVMLS） approximation is presented. The ICVMLS approximation has an explicit physics meaning. Compared with the complex variable moving least-squar...In this paper, the improved complex variable moving least-squares （ICVMLS） approximation is presented. The ICVMLS approximation has an explicit physics meaning. Compared with the complex variable moving least-squares （CVMLS） approximations presented by Cheng and Ren, the ICVMLS approximation has a great computational precision and efficiency. Based on the element-free Galerkin （EFG） method and the ICVMLS approximation, the improved complex variable element-free Galerkin （ICVEFG） method is presented for two-dimensional elasticity problems, and the corresponding formulae are obtained. Compared with the conventional EFC method, the ICVEFG method has a great computational accuracy and efficiency. For the purpose of demonstration, three selected numerical examples are solved using the ICVEFG method.展开更多
Based on the complex variable moving least-square （CVMLS） approximation, the complex variable element-free Galerkin （CVEFG） method for two-dimensional viscoelasticity problems under the creep condition is presente...Based on the complex variable moving least-square （CVMLS） approximation, the complex variable element-free Galerkin （CVEFG） method for two-dimensional viscoelasticity problems under the creep condition is presented in this paper. The Galerkin weak form is employed to obtain the equation system, and the penalty method is used to apply the essential boundary conditions, then the corresponding formulae of the CVEFG method for two-dimensional viscoelasticity problems under the creep condition are obtained. Compared with the element-free Galerkin （EFG） method, with the same node distribution, the CVEFG method has higher precision, and to obtain the similar precision, the CVEFG method has greater computational efficiency. Some numerical examples are given to demonstrate the validity and the efficiency of the method.展开更多
In this paper, based on the element-free Galerkin （EFG） method and the improved complex variable moving least- square （ICVMLS） approximation, a new meshless method, which is the improved complex variable element-f...In this paper, based on the element-free Galerkin （EFG） method and the improved complex variable moving least- square （ICVMLS） approximation, a new meshless method, which is the improved complex variable element-free Galerkin （ICVEFG） method for two-dimensional potential problems, is presented. In the method, the integral weak form of control equations is employed, and the Lagrange multiplier is used to apply the essential boundary conditions. Then the corresponding formulas of the ICVEFG method for two-dimensional potential problems are obtained. Compared with the complex variable moving least-square （CVMLS） approximation proposed by Cheng, the functional in the ICVMLS approximation has an explicit physical meaning. Furthermore, the ICVEFG method has greater computational precision and efficiency. Three numerical examples are given to show the validity of the proposed method.展开更多
In this paper, based on the conjugate of the complex basis function, a new complex variable moving least-squares approximation is discussed. Then using the new approximation to obtain the shape function, an improved c...In this paper, based on the conjugate of the complex basis function, a new complex variable moving least-squares approximation is discussed. Then using the new approximation to obtain the shape function, an improved complex variable element-free Galerkin（ICVEFG） method is presented for two-dimensional（2D） elastoplasticity problems. Compared with the previous complex variable moving least-squares approximation, the new approximation has greater computational precision and efficiency. Using the penalty method to apply the essential boundary conditions, and using the constrained Galerkin weak form of 2D elastoplasticity to obtain the system equations, we obtain the corresponding formulae of the ICVEFG method for 2D elastoplasticity. Three selected numerical examples are presented using the ICVEFG method to show that the ICVEFG method has the advantages such as greater precision and computational efficiency over the conventional meshless methods.展开更多
On the basis of the reproducing kernel particle method （RKPM）, a new meshless method, which is called the complex variable reproducing kernel particle method （CVRKPM）, for two-dimensional elastodynamics is present...On the basis of the reproducing kernel particle method （RKPM）, a new meshless method, which is called the complex variable reproducing kernel particle method （CVRKPM）, for two-dimensional elastodynamics is presented in this paper. The advantages of the CVRKPM are that the correction function of a two-dimensional problem is formed with one-dimensional basis function when the shape function is obtained. The Galerkin weak form is employed to obtain the discretised system equations, and implicit time integration method, which is the Newmark method, is used for time history analysis. And the penalty method is employed to apply the essential boundary conditions. Then the corresponding formulae of the CVRKPM for two-dimensional elastodynamics are obtained. Three numerical examples of two-dimensional elastodynamics are presented, and the CVRKPM results are compared with the ones of the RKPM and analytical solutions. It is evident that the numerical results of the CVRKPM are in excellent agreement with the analytical solution, and that the CVRKPM has greater precision than the RKPM.展开更多
Based on the complex variable moving least-square（CVMLS） approximation and a local symmetric weak form,the complex variable meshless local Petrov-Galerkin（CVMLPG） method of solving two-dimensional potential proble...Based on the complex variable moving least-square（CVMLS） approximation and a local symmetric weak form,the complex variable meshless local Petrov-Galerkin（CVMLPG） method of solving two-dimensional potential problems is presented in this paper.In the present formulation,the trial function of a two-dimensional problem is formed with a one-dimensional basis function.The number of unknown coefficients in the trial function of the CVMLS approximation is less than that in the trial function of the moving least-square（MLS） approximation.The essential boundary conditions are imposed by the penalty method.The main advantage of this approach over the conventional meshless local Petrov-Galerkin（MLPG） method is its computational efficiency.Several numerical examples are presented to illustrate the implementation and performance of the present CVMLPG method.展开更多
By virtue of the comparability between the wave superposition method and the dynamic analysis of structures, a general format for overcoming the non-uniqueness of solution induced by the wave superposition method at t...By virtue of the comparability between the wave superposition method and the dynamic analysis of structures, a general format for overcoming the non-uniqueness of solution induced by the wave superposition method at the eigenfrequencies of the corresponding interior problems is proposed. By adding appropriate damp to the virtual source system of the wave superposition method, the unique solutions for all wave numbers can be ensured. Based on this thought, a novel method-wave superposition method with complex radius vector is constructed. Not only is the computational time of this method approximately equal to that of the standard wave superposition method, but also the accuracy is much higher compared with other correlative methods. Finally, by taking the pulsating sphere and oscillating sphere as examples, the results of calculation show that the present method can effectively overcome the non-uniqueness problem.展开更多
In this paper, a new extended complex tanh-function method is presented for constructing traveling wave, non-traveling wave, and coefficient functions＇ soliton-like solutions of nonlinear equations. This method is mo...In this paper, a new extended complex tanh-function method is presented for constructing traveling wave, non-traveling wave, and coefficient functions＇ soliton-like solutions of nonlinear equations. This method is more powerful than the complex tanh-function method [Chaos, Solitons and Fractals 20 （2004） 1037]. Abundant new solutions o[ （2q-1）-dimensional Hirota equation are obtained by using this method and symbolic computation system Maple.展开更多
In this paper,an improved complex variable meshless method（ICVMM） for two-dimensional advection-diffusion problems is developed based on improved complex variable moving least-square（ICVMLS） approximation.The equi...In this paper,an improved complex variable meshless method（ICVMM） for two-dimensional advection-diffusion problems is developed based on improved complex variable moving least-square（ICVMLS） approximation.The equivalent functional of two-dimensional advection-diffusion problems is formed,the variation method is used to obtain the equation system,and the penalty method is employed to impose the essential boundary conditions.The difference method for twopoint boundary value problems is used to obtain the discrete equations.Then the corresponding formulas of the ICVMM for advection-diffusion problems are presented.Two numerical examples with different node distributions are used to validate and investigate the accuracy and efficiency of the new method in this paper.It is shown that ICVMM is very effective for advection-diffusion problems,and has a good convergent character,accuracy,and computational efficiency.展开更多
Recovery processes of secondary resources usually encounter problems because of the diverse com- positions of wastes. To enhance the applicability of tradi- tional hydrometallurgical process toward secondary resources...Recovery processes of secondary resources usually encounter problems because of the diverse com- positions of wastes. To enhance the applicability of tradi- tional hydrometallurgical process toward secondary resources, the adjustment of components is necessary. In traditional hydrometallurgical separation, precipitation and complexation are extensively used. However, their com- bination as a specific metal separation method has not yet been studied in detail. This approach is very promising for solving problems caused by changeable components during recycling processes of secondary resources. This paper reviews the effects of precipitation and complexation in metal separation processes, and a metal separation method system of ＂complexation-precipitation＂ developed to adjust the components of secondary resources is introduced.展开更多
This paper puts forward a complex inner product averaging method for calculating normal form of ODE. Compared with conventional averaging method, the theoretic analytical process has such simple forms as to realize co...This paper puts forward a complex inner product averaging method for calculating normal form of ODE. Compared with conventional averaging method, the theoretic analytical process has such simple forms as to realize computer program easily. Results can be applied in both autonomous and non-autonomous systems. At last, an example is resolved to verify the method.展开更多
In this paper, the complex variable reproducing kernel particle （CVRKP） method and the finite element （FE） method are combined as the CVRKP-FE method to solve transient heat conduction problems. The CVRKP-FE metho...In this paper, the complex variable reproducing kernel particle （CVRKP） method and the finite element （FE） method are combined as the CVRKP-FE method to solve transient heat conduction problems. The CVRKP-FE method not only conveniently imposes the essential boundary conditions, but also exploits the advantages of the individual methods while avoiding their disadvantages, then the computational efficiency is higher. A hybrid approximation function is applied to combine the CVRKP method with the FE method, and the traditional difference method for two-point boundary value problems is selected as the time discretization scheme. The corresponding formulations of the CVRKP-FE method are presented in detail. Several selected numerical examples of the transient heat conduction problems are presented to illustrate the performance of the CVRKP-FE method.展开更多
This work presents a study on the synthesis of LaNixCo1-xO3 perovskites via complex precursor methods. Perovskite oxides with the composition LaNixCo1-xO3 were synthesized by chelating precursor and polymeric precurso...This work presents a study on the synthesis of LaNixCo1-xO3 perovskites via complex precursor methods. Perovskite oxides with the composition LaNixCo1-xO3 were synthesized by chelating precursor and polymeric precursor methods using nickel and/or cobalt nitrates, lanthanum nitrate, ethylene glycol, citric acid, and EDTA as starting source. The obtained perovskite were characterized by thermogravimetric analysis, infrared spectroscopy, X-ray diffraction and the morphology of the samples were investigated by N2 adsorption experiments and average medium particle size. TG curves and FTIR spectra were particularly useful in establishing of the optimal calcination temperature of the precursor powders. X-ray diffraction patterns revealed the formation of the perovskite structure in all samples prepared by both synthesis method and after calcinations at 700℃. The results showed that the preparation method resulted in oxides with the intended structure. The specific surface area values were influenced by preparation method.展开更多
This paper presents a rapid and simple risk calculation method for large and complex engineering systems, the simulated maximum entropy method （SMEM）, which is based on integration of the advantages of the Monte Car...This paper presents a rapid and simple risk calculation method for large and complex engineering systems, the simulated maximum entropy method （SMEM）, which is based on integration of the advantages of the Monte Carlo and maximum entropy methods, thus avoiding the shortcoming of the slow convergence rate of the Monte Carlo method in risk calculation. Application of SMEM in the calculation of reservoir flood discharge risk shows that this method can make full use of the known information under the same conditions and obtain the corresponding probability distribution and the risk value. It not only greatly improves the speed, compared with the Monte Carlo method, but also provides a new approach for the risk calculation in large and complex engineering systems.展开更多
On the basis of the complex variable moving least-square （CVMLS） approximation, a complex variable meshless local Petrov-Galerkin （CVMLPG） method is presented for transient heat conduction problems. The method is ...On the basis of the complex variable moving least-square （CVMLS） approximation, a complex variable meshless local Petrov-Galerkin （CVMLPG） method is presented for transient heat conduction problems. The method is developed based on the CVMLS approximation for constructing shape functions at scattered points, and the Heaviside step function is used as a test function in each sub-domain to avoid the need for a domain integral in symmetric weak form. In the construction of the well-performed shape function, the trial function of a two-dimensional （2D） problem is formed with a one-dimensional （1D） basis function, thus improving computational efficiency. The numerical results are compared with the exact solutions of the problems and the finite element method （FEM）. This comparison illustrates the accuracy as well as the capability of the CVMLPG method.展开更多
The identification of the influential nodes in a network is of great significance for understanding the features of the network and controlling the complexity of networks in society and in biology. In this paper, we ...The identification of the influential nodes in a network is of great significance for understanding the features of the network and controlling the complexity of networks in society and in biology. In this paper, we propose a novel centrality measure for a node by considering the importance of edges and compare the performance of this method with existing seven topological-based ranking methods on the Susceptible-Infected-Recovered （SIR） model. The simulation results for four different types of real networks show that the proposed method is robust and exhibits excellent performance in identifying the most influential nodes when spreading starting from both single origin and multipleorigins simultaneously.展开更多
The incompressible two-phase flows are simulated using combination of an etching multiblock method and a diffuse interface （DI） model, particularly in the com- plex domain that can be decomposed into multiple rectan...The incompressible two-phase flows are simulated using combination of an etching multiblock method and a diffuse interface （DI） model, particularly in the com- plex domain that can be decomposed into multiple rectangular subdomains. The etching multiblock method allows natural communications between the connected subdomains and the efficient parallel computation. The DI model can consider two-phase flows with a large density ratio, and simulate the flows with the moving contact line （MCL） when a geometric formulation of the MCL model is included. Therefore, combination of the etch- ing method and the DI model has potential to deal with a variety of two-phase flows in industrial applications. The performance is examined through a series of numerical exper- iments. The convergence of the etching method is firstly tested by simulating single-phase flows past a square cylinder, and the method for the multiphase flow simulation is vali- dated by investing drops dripping from a pore. The numerical results are compared with either those from other researchers or experimental data. Good agreement is achieved. The method is also used to investigate the impact of a droplet on a grooved substrate and droplet generation in flow focusing devices.展开更多
基金Supported by the Key Scientific and Technological Project of Henan Province (102102110157)the Scientific Research Found Project of Henan University of Urban Construction (2010JZD008)~~
文摘[Objective] This paper aims to study a new method of extracting pumpkin polysaccharide from pumpkin. Single factor experiments were conducted to examine the effects of extracting time,temperature,the solid-liquid ratio and pH value on the extraction yield of polysaccharide from pumpkin. [Method] The best enzyme ratio and extraction conditions for complex enzymes extraction were determined through orthogonal tests. Scavenging ·OH and O-2 activities of pumpkin polysaccharides were also investigated by salicylic acid and improved self-oxidation of o-pheno methods respectively. [Results] The results showed that the biggest extraction yield of polysaccharide from pumpkin can be got when adding 1% cellulose enzyme,1.5% pectinase,1.0% papain and Na2HPO4-citric acid buffer solution (pH was 4.6),and oscillating for 30 min under water at 40 ℃ with the solid-liquid ratio of 1:30. In addition,pumpkin polysaccharides had a strong activity of eliminating ·OH,but very weak activity to scavenge O-2. [Conclusion] This study provided basic data for research and application of Pumpkin polysaccharide.
基金TheNationalNaturalScienceFoundationofChina (No .2 96 770 0 4)
文摘The effects of the calorimetric buffer solutions were investigated while the two colorimetric reactions of AI-ferron complex and Fe-ferron complex occurred individually, and the effects of the testing wavelength and the pH of the solutions were also investigated. A timed complexatian colorimetric analysis method of Al-Fe-ferron in view of the total concentration of {AI + Fe} was then established to determine the species distribution of polymeric Al-Fe. The testing wavelength was recommended at 362 net and the testing pH value was 5. With a comparison of the ratios of n(Al)/n(Fe), the standard adsorption curves of the polymeric Al-Fe solutions were derived from the experimental results. Furthermore, the solutions' composition were carious in both the molar n(Al)/n(Fe) ratios, i.e. 0/0, 5/5, 9/1 and 0/10, and the concentrations associated with the total ( Al + Fe which ranged from 10(-5) to 10(-4) mol/L..
基金supported by the National Natural Science Foundation of China (Grant No.11026223)the Shanghai Leading Academic Discipline Project,China (Grant No.S30106)the Innovation Fund Project for Graduate Student of Shanghai University,China (Grant No.SHUCX112359)
文摘In this paper, the improved complex variable moving least-squares （ICVMLS） approximation is presented. The ICVMLS approximation has an explicit physics meaning. Compared with the complex variable moving least-squares （CVMLS） approximations presented by Cheng and Ren, the ICVMLS approximation has a great computational precision and efficiency. Based on the element-free Galerkin （EFG） method and the ICVMLS approximation, the improved complex variable element-free Galerkin （ICVEFG） method is presented for two-dimensional elasticity problems, and the corresponding formulae are obtained. Compared with the conventional EFC method, the ICVEFG method has a great computational accuracy and efficiency. For the purpose of demonstration, three selected numerical examples are solved using the ICVEFG method.
基金Project supported by the National Natural Science Foundation of China (Grant No. 11171208)the Shanghai Leading Academic Discipline Project, China (Grant No. S30106)
文摘Based on the complex variable moving least-square （CVMLS） approximation, the complex variable element-free Galerkin （CVEFG） method for two-dimensional viscoelasticity problems under the creep condition is presented in this paper. The Galerkin weak form is employed to obtain the equation system, and the penalty method is used to apply the essential boundary conditions, then the corresponding formulae of the CVEFG method for two-dimensional viscoelasticity problems under the creep condition are obtained. Compared with the element-free Galerkin （EFG） method, with the same node distribution, the CVEFG method has higher precision, and to obtain the similar precision, the CVEFG method has greater computational efficiency. Some numerical examples are given to demonstrate the validity and the efficiency of the method.
基金Project supported by the National Natural Science Foundation of China (Grant No. 11171208)the Shanghai Leading Academic Discipline Project, China (Grant No. S30106)the Innovation Fund Project for Graduate Student of Shanghai University,China (Grant No. SHUCX112359)
文摘In this paper, based on the element-free Galerkin （EFG） method and the improved complex variable moving least- square （ICVMLS） approximation, a new meshless method, which is the improved complex variable element-free Galerkin （ICVEFG） method for two-dimensional potential problems, is presented. In the method, the integral weak form of control equations is employed, and the Lagrange multiplier is used to apply the essential boundary conditions. Then the corresponding formulas of the ICVEFG method for two-dimensional potential problems are obtained. Compared with the complex variable moving least-square （CVMLS） approximation proposed by Cheng, the functional in the ICVMLS approximation has an explicit physical meaning. Furthermore, the ICVEFG method has greater computational precision and efficiency. Three numerical examples are given to show the validity of the proposed method.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11171208 and U1433104)
文摘In this paper, based on the conjugate of the complex basis function, a new complex variable moving least-squares approximation is discussed. Then using the new approximation to obtain the shape function, an improved complex variable element-free Galerkin（ICVEFG） method is presented for two-dimensional（2D） elastoplasticity problems. Compared with the previous complex variable moving least-squares approximation, the new approximation has greater computational precision and efficiency. Using the penalty method to apply the essential boundary conditions, and using the constrained Galerkin weak form of 2D elastoplasticity to obtain the system equations, we obtain the corresponding formulae of the ICVEFG method for 2D elastoplasticity. Three selected numerical examples are presented using the ICVEFG method to show that the ICVEFG method has the advantages such as greater precision and computational efficiency over the conventional meshless methods.
基金supported by the National Natural Science Foundation of China (Grant No.10871124)the Innovation Program of Shanghai Municipal Education Commission,China (Grant No.09ZZ99)
文摘On the basis of the reproducing kernel particle method （RKPM）, a new meshless method, which is called the complex variable reproducing kernel particle method （CVRKPM）, for two-dimensional elastodynamics is presented in this paper. The advantages of the CVRKPM are that the correction function of a two-dimensional problem is formed with one-dimensional basis function when the shape function is obtained. The Galerkin weak form is employed to obtain the discretised system equations, and implicit time integration method, which is the Newmark method, is used for time history analysis. And the penalty method is employed to apply the essential boundary conditions. Then the corresponding formulae of the CVRKPM for two-dimensional elastodynamics are obtained. Three numerical examples of two-dimensional elastodynamics are presented, and the CVRKPM results are compared with the ones of the RKPM and analytical solutions. It is evident that the numerical results of the CVRKPM are in excellent agreement with the analytical solution, and that the CVRKPM has greater precision than the RKPM.
基金Project supported by the Young Scientists Fund of the National Natural Science Foundation of China (Grant No. 11102125)
文摘Based on the complex variable moving least-square（CVMLS） approximation and a local symmetric weak form,the complex variable meshless local Petrov-Galerkin（CVMLPG） method of solving two-dimensional potential problems is presented in this paper.In the present formulation,the trial function of a two-dimensional problem is formed with a one-dimensional basis function.The number of unknown coefficients in the trial function of the CVMLS approximation is less than that in the trial function of the moving least-square（MLS） approximation.The essential boundary conditions are imposed by the penalty method.The main advantage of this approach over the conventional meshless local Petrov-Galerkin（MLPG） method is its computational efficiency.Several numerical examples are presented to illustrate the implementation and performance of the present CVMLPG method.
基金Project supported by the National Natural Science Foundation of China (No. 10172038).
文摘By virtue of the comparability between the wave superposition method and the dynamic analysis of structures, a general format for overcoming the non-uniqueness of solution induced by the wave superposition method at the eigenfrequencies of the corresponding interior problems is proposed. By adding appropriate damp to the virtual source system of the wave superposition method, the unique solutions for all wave numbers can be ensured. Based on this thought, a novel method-wave superposition method with complex radius vector is constructed. Not only is the computational time of this method approximately equal to that of the standard wave superposition method, but also the accuracy is much higher compared with other correlative methods. Finally, by taking the pulsating sphere and oscillating sphere as examples, the results of calculation show that the present method can effectively overcome the non-uniqueness problem.
基金The project supported by National Natural Science Foundation of China and the Natural Science Foundation of Shandong Province of China
文摘In this paper, a new extended complex tanh-function method is presented for constructing traveling wave, non-traveling wave, and coefficient functions＇ soliton-like solutions of nonlinear equations. This method is more powerful than the complex tanh-function method [Chaos, Solitons and Fractals 20 （2004） 1037]. Abundant new solutions o[ （2q-1）-dimensional Hirota equation are obtained by using this method and symbolic computation system Maple.
基金Project supported by the National Natural Science Foundation of China (Grant No. 11171208)the Shanghai Leading Academic Discipline Project,China(Grant No. S30106)the Innovation Fund for Graduate Student of Shanghai University,China (Grant No. SHUCX120125)
文摘In this paper,an improved complex variable meshless method（ICVMM） for two-dimensional advection-diffusion problems is developed based on improved complex variable moving least-square（ICVMLS） approximation.The equivalent functional of two-dimensional advection-diffusion problems is formed,the variation method is used to obtain the equation system,and the penalty method is employed to impose the essential boundary conditions.The difference method for twopoint boundary value problems is used to obtain the discrete equations.Then the corresponding formulas of the ICVMM for advection-diffusion problems are presented.Two numerical examples with different node distributions are used to validate and investigate the accuracy and efficiency of the new method in this paper.It is shown that ICVMM is very effective for advection-diffusion problems,and has a good convergent character,accuracy,and computational efficiency.
基金financially supported by the National High-tech R&D Program of China(No.2013AA040208)the National Natural Science Foundation of China(No.51304010)the Beijing Natural Science Foundation(No.2132016)
文摘Recovery processes of secondary resources usually encounter problems because of the diverse com- positions of wastes. To enhance the applicability of tradi- tional hydrometallurgical process toward secondary resources, the adjustment of components is necessary. In traditional hydrometallurgical separation, precipitation and complexation are extensively used. However, their com- bination as a specific metal separation method has not yet been studied in detail. This approach is very promising for solving problems caused by changeable components during recycling processes of secondary resources. This paper reviews the effects of precipitation and complexation in metal separation processes, and a metal separation method system of ＂complexation-precipitation＂ developed to adjust the components of secondary resources is introduced.
文摘This paper puts forward a complex inner product averaging method for calculating normal form of ODE. Compared with conventional averaging method, the theoretic analytical process has such simple forms as to realize computer program easily. Results can be applied in both autonomous and non-autonomous systems. At last, an example is resolved to verify the method.
基金Project supported by the National Natural Science Foundation of China (Grant No. 11171208)the Special Fund for Basic Scientific Research of Central Colleges of Chang’an University, China (Grant No. CHD2011JC080)
文摘In this paper, the complex variable reproducing kernel particle （CVRKP） method and the finite element （FE） method are combined as the CVRKP-FE method to solve transient heat conduction problems. The CVRKP-FE method not only conveniently imposes the essential boundary conditions, but also exploits the advantages of the individual methods while avoiding their disadvantages, then the computational efficiency is higher. A hybrid approximation function is applied to combine the CVRKP method with the FE method, and the traditional difference method for two-point boundary value problems is selected as the time discretization scheme. The corresponding formulations of the CVRKP-FE method are presented in detail. Several selected numerical examples of the transient heat conduction problems are presented to illustrate the performance of the CVRKP-FE method.
文摘This work presents a study on the synthesis of LaNixCo1-xO3 perovskites via complex precursor methods. Perovskite oxides with the composition LaNixCo1-xO3 were synthesized by chelating precursor and polymeric precursor methods using nickel and/or cobalt nitrates, lanthanum nitrate, ethylene glycol, citric acid, and EDTA as starting source. The obtained perovskite were characterized by thermogravimetric analysis, infrared spectroscopy, X-ray diffraction and the morphology of the samples were investigated by N2 adsorption experiments and average medium particle size. TG curves and FTIR spectra were particularly useful in establishing of the optimal calcination temperature of the precursor powders. X-ray diffraction patterns revealed the formation of the perovskite structure in all samples prepared by both synthesis method and after calcinations at 700℃. The results showed that the preparation method resulted in oxides with the intended structure. The specific surface area values were influenced by preparation method.
基金supported by the National Water Pollution Control and Management Technology Major Projects(Grant No. 2009ZX07423-001)the National Natural Science Foundation of China (Grants No.51179069and 40971300)the Fundamental Research Funds for the Central Universities (Grants No.10QX43,09MG16,and 10QG23)
文摘This paper presents a rapid and simple risk calculation method for large and complex engineering systems, the simulated maximum entropy method （SMEM）, which is based on integration of the advantages of the Monte Carlo and maximum entropy methods, thus avoiding the shortcoming of the slow convergence rate of the Monte Carlo method in risk calculation. Application of SMEM in the calculation of reservoir flood discharge risk shows that this method can make full use of the known information under the same conditions and obtain the corresponding probability distribution and the risk value. It not only greatly improves the speed, compared with the Monte Carlo method, but also provides a new approach for the risk calculation in large and complex engineering systems.
基金supported by the National Natural Science Foundation of China(Grant No.51078250)the Research Project by Shanxi Scholarship Council of Shanxi Province,China(Grant No.2013-096)the Scientific&Technological Innovation Program for Postgraduates of Taiyuan University of Science and Technology,China(Grant No.20125026)
文摘On the basis of the complex variable moving least-square （CVMLS） approximation, a complex variable meshless local Petrov-Galerkin （CVMLPG） method is presented for transient heat conduction problems. The method is developed based on the CVMLS approximation for constructing shape functions at scattered points, and the Heaviside step function is used as a test function in each sub-domain to avoid the need for a domain integral in symmetric weak form. In the construction of the well-performed shape function, the trial function of a two-dimensional （2D） problem is formed with a one-dimensional （1D） basis function, thus improving computational efficiency. The numerical results are compared with the exact solutions of the problems and the finite element method （FEM）. This comparison illustrates the accuracy as well as the capability of the CVMLPG method.
基金Supported by the Research Foundation of Hubei Province Department of Education(Q20151505)the East China Jiaotong University Doctor Scientific Research Start Fund Project(26441021)
文摘The identification of the influential nodes in a network is of great significance for understanding the features of the network and controlling the complexity of networks in society and in biology. In this paper, we propose a novel centrality measure for a node by considering the importance of edges and compare the performance of this method with existing seven topological-based ranking methods on the Susceptible-Infected-Recovered （SIR） model. The simulation results for four different types of real networks show that the proposed method is robust and exhibits excellent performance in identifying the most influential nodes when spreading starting from both single origin and multipleorigins simultaneously.
基金Project supported by the National Natural Science Foundation of China(No.11425210)the Fundamental Research Funds for the Central Universities(No.WK2090050025)
文摘The incompressible two-phase flows are simulated using combination of an etching multiblock method and a diffuse interface （DI） model, particularly in the com- plex domain that can be decomposed into multiple rectangular subdomains. The etching multiblock method allows natural communications between the connected subdomains and the efficient parallel computation. The DI model can consider two-phase flows with a large density ratio, and simulate the flows with the moving contact line （MCL） when a geometric formulation of the MCL model is included. Therefore, combination of the etch- ing method and the DI model has potential to deal with a variety of two-phase flows in industrial applications. The performance is examined through a series of numerical exper- iments. The convergence of the etching method is firstly tested by simulating single-phase flows past a square cylinder, and the method for the multiphase flow simulation is vali- dated by investing drops dripping from a pore. The numerical results are compared with either those from other researchers or experimental data. Good agreement is achieved. The method is also used to investigate the impact of a droplet on a grooved substrate and droplet generation in flow focusing devices.
