This paper defines new kinds of functions——the conjugate axisymmetric poteptial functions. With the aid of them, we can prove the completeness of the solutions of the generalized axisymmetric Stokes flow equation wi...This paper defines new kinds of functions——the conjugate axisymmetric poteptial functions. With the aid of them, we can prove the completeness of the solutions of the generalized axisymmetric Stokes flow equation without the condition on the convexity of the domain.展开更多
A complete boundary integral formulation for steady compressible inviscid flows governed by nonlinear equations is established by using ρV as variable. Thus, the dimensionality of the problem to be solved is reduced ...A complete boundary integral formulation for steady compressible inviscid flows governed by nonlinear equations is established by using ρV as variable. Thus, the dimensionality of the problem to be solved is reduced by one and the computational mesh to be generated is needed only on the boundary of the domain.展开更多
Emerson Process Management Company (EPMC)announced on April 7th that the world advanced AsianFlow MeasuringCenter, invested and constructed byEPMC,was successfully completed in Nanjing, Jiangsu Province.Despite the se...Emerson Process Management Company (EPMC)announced on April 7th that the world advanced AsianFlow MeasuringCenter, invested and constructed byEPMC,was successfully completed in Nanjing, Jiangsu Province.Despite the severe snowstorm during the construction,展开更多
Decreasing the flow completion time(FCT) and increasing the throughput are two fundamental targets in datacenter networks(DCNs), but current mechanisms mostly focus on one of the problems. In this paper, we propose OF...Decreasing the flow completion time(FCT) and increasing the throughput are two fundamental targets in datacenter networks(DCNs), but current mechanisms mostly focus on one of the problems. In this paper, we propose OFMPC, an Open Flow based Multi Path Cooperation framework, to decrease FCT and increase the network throughput. OFMPC partitions the end-to-end transmission paths into two classes, which are low delay paths(LDPs) and high throughput paths(HTPs), respectively. Short flows are assigned to LDPs to avoid long queueing delay, while long flows are assigned to HTPs to guarantee their throughput. Meanwhile, a dynamic scheduling mechanism is presented to improve network efficiency. We evaluate OFMPC in Mininet emulator and a testbed, and the experimental results show that OFMPC can effectively decrease FCT. Besides, OFMPC also increases the throughput up to more than 84% of bisection bandwidth.展开更多
The paper presents the advancement and applications of the elasto-plastic cellular automaton （EPCA）, a simulator for rock mechanics and rock engineering. The most significant feature of EPCA lies in its ＇down-top＇...The paper presents the advancement and applications of the elasto-plastic cellular automaton （EPCA）, a simulator for rock mechanics and rock engineering. The most significant feature of EPCA lies in its ＇down-top＇ way of dealing with nonlinear behaviors of rocks. The theory, the basic idea and associated developments, including the definition of cellular automaton, the heterogeneous material model, constitutive relations, failure criteria, the post-yield softening scheme, the thermo-hydro-mechanical coupling process, are described. The applications are presented to show the ability of EPCA to model the rock failure process, fluid flow, heat transfer, and the coupled thermo-hydro-mechanical （THM） process etc.展开更多
A series of 2D direct numerical simulations were performed with an accurate level set method for single drop impacts.The adopted ACLS method was validated to be efficient with perfect mass conservation in both normal ...A series of 2D direct numerical simulations were performed with an accurate level set method for single drop impacts.The adopted ACLS method was validated to be efficient with perfect mass conservation in both normal and oblique impacts.A square-root correction for neck bases was modified in accuracy as well as scope of applications.In addition,process of jet formation and evolution was studied to reveal internal dynamics in drop impacts.It's found that pressure gradient and vortex are coexisting and completive reasons for jet topology while the inclined angle has a significant effect on them.Mechanisms of jet formation and evolution are different in the front and back necks.With the help of PDF distribution and correction calculation,a compromise in the competition is observed.This work lays a solid foundation for further studies of dynamics in gas-liquid flows.展开更多
According to the high operating costs and a large number of energy waste in the current data center network architectures, we propose a kind of trusted flow preemption scheduling combining the energy-saving routing me...According to the high operating costs and a large number of energy waste in the current data center network architectures, we propose a kind of trusted flow preemption scheduling combining the energy-saving routing mechanism based on typical data center network architecture. The mechanism can make the network flow in its exclusive network link bandwidth and transmission path, which can improve the link utilization and the use of the network energy efficiency. Meanwhile, we apply trusted computing to guarantee the high security, high performance and high fault-tolerant routing forwarding service, which helps improving the average completion time of network flow.展开更多
In this paper, the annular flow. model for in tube completed condensation is employed to predict the steady flow condensation heat transfer characteristics in a tube under zero-gravitation. In this easel it is propose...In this paper, the annular flow. model for in tube completed condensation is employed to predict the steady flow condensation heat transfer characteristics in a tube under zero-gravitation. In this easel it is proposed that vapor condenses on the liquid film surface. Due to the effect of surface tension, the liquid exists in the form of liquid film ring contacting wall; when the velocity of vapor core decreases to zerol the condensation process ends. Putting forward the physical and mathematical models, the problem is solved and the multi-order equation of the thickness of liquid film is obtained, which includes terms of the pressure gradient along axial direction, the friction force between vapor and liquid on interface. By computational calculation, this model can be used not only to predict the thickness of liquid film, the condensation pressure gradient along the axial direction, but also to determine the Nusselt number, the condensation length and the total flow pressure drop of condensation etc. At the end, the calculation results of the necessary condensation length are compared approximately with those from the experiments, which are obtained on the test set-up placed horizontally in gravitation field, and the deviation is analyzed.展开更多
文摘This paper defines new kinds of functions——the conjugate axisymmetric poteptial functions. With the aid of them, we can prove the completeness of the solutions of the generalized axisymmetric Stokes flow equation without the condition on the convexity of the domain.
文摘A complete boundary integral formulation for steady compressible inviscid flows governed by nonlinear equations is established by using ρV as variable. Thus, the dimensionality of the problem to be solved is reduced by one and the computational mesh to be generated is needed only on the boundary of the domain.
文摘Emerson Process Management Company (EPMC)announced on April 7th that the world advanced AsianFlow MeasuringCenter, invested and constructed byEPMC,was successfully completed in Nanjing, Jiangsu Province.Despite the severe snowstorm during the construction,
基金supported by the State Key Development Program for Basic Research of China under Grant No.2012CB315806the National Natural Science Foundation of China under Grant Nos.61103225 and 61379149+1 种基金Jiangsu Province Natural Science Foundation of China under Grant No.BK20140070Jiangsu Future Networks Innovation Institute Prospective Research Project on Future Networks under Grant No.BY2013095-1-06
文摘Decreasing the flow completion time(FCT) and increasing the throughput are two fundamental targets in datacenter networks(DCNs), but current mechanisms mostly focus on one of the problems. In this paper, we propose OFMPC, an Open Flow based Multi Path Cooperation framework, to decrease FCT and increase the network throughput. OFMPC partitions the end-to-end transmission paths into two classes, which are low delay paths(LDPs) and high throughput paths(HTPs), respectively. Short flows are assigned to LDPs to avoid long queueing delay, while long flows are assigned to HTPs to guarantee their throughput. Meanwhile, a dynamic scheduling mechanism is presented to improve network efficiency. We evaluate OFMPC in Mininet emulator and a testbed, and the experimental results show that OFMPC can effectively decrease FCT. Besides, OFMPC also increases the throughput up to more than 84% of bisection bandwidth.
基金supported by the National Basic Research Program of China (No. 2010CB732006)the National Natural Science Foundation of China (Nos. 10972231, 50709036 and 11002154)
文摘The paper presents the advancement and applications of the elasto-plastic cellular automaton （EPCA）, a simulator for rock mechanics and rock engineering. The most significant feature of EPCA lies in its ＇down-top＇ way of dealing with nonlinear behaviors of rocks. The theory, the basic idea and associated developments, including the definition of cellular automaton, the heterogeneous material model, constitutive relations, failure criteria, the post-yield softening scheme, the thermo-hydro-mechanical coupling process, are described. The applications are presented to show the ability of EPCA to model the rock failure process, fluid flow, heat transfer, and the coupled thermo-hydro-mechanical （THM） process etc.
基金Supported by the National Natural Science Foundation of China(91541202,51276163)
文摘A series of 2D direct numerical simulations were performed with an accurate level set method for single drop impacts.The adopted ACLS method was validated to be efficient with perfect mass conservation in both normal and oblique impacts.A square-root correction for neck bases was modified in accuracy as well as scope of applications.In addition,process of jet formation and evolution was studied to reveal internal dynamics in drop impacts.It's found that pressure gradient and vortex are coexisting and completive reasons for jet topology while the inclined angle has a significant effect on them.Mechanisms of jet formation and evolution are different in the front and back necks.With the help of PDF distribution and correction calculation,a compromise in the competition is observed.This work lays a solid foundation for further studies of dynamics in gas-liquid flows.
基金supported by the National Natural Science Foundation of China(The key trusted running technologies for the sensing nodes in Internet of things: 61501007The outstanding personnel training program of Beijing municipal Party Committee Organization Department (The Research of Trusted Computing environment for Internet of things in Smart City: 2014000020124G041
文摘According to the high operating costs and a large number of energy waste in the current data center network architectures, we propose a kind of trusted flow preemption scheduling combining the energy-saving routing mechanism based on typical data center network architecture. The mechanism can make the network flow in its exclusive network link bandwidth and transmission path, which can improve the link utilization and the use of the network energy efficiency. Meanwhile, we apply trusted computing to guarantee the high security, high performance and high fault-tolerant routing forwarding service, which helps improving the average completion time of network flow.
文摘In this paper, the annular flow. model for in tube completed condensation is employed to predict the steady flow condensation heat transfer characteristics in a tube under zero-gravitation. In this easel it is proposed that vapor condenses on the liquid film surface. Due to the effect of surface tension, the liquid exists in the form of liquid film ring contacting wall; when the velocity of vapor core decreases to zerol the condensation process ends. Putting forward the physical and mathematical models, the problem is solved and the multi-order equation of the thickness of liquid film is obtained, which includes terms of the pressure gradient along axial direction, the friction force between vapor and liquid on interface. By computational calculation, this model can be used not only to predict the thickness of liquid film, the condensation pressure gradient along the axial direction, but also to determine the Nusselt number, the condensation length and the total flow pressure drop of condensation etc. At the end, the calculation results of the necessary condensation length are compared approximately with those from the experiments, which are obtained on the test set-up placed horizontally in gravitation field, and the deviation is analyzed.
