By phenomenological analysis of warm compaction, it is found that, compared with the contribution of particle plastical deformation to densification of powder compact,the particle rearrangement is a dominant densifica...By phenomenological analysis of warm compaction, it is found that, compared with the contribution of particle plastical deformation to densification of powder compact,the particle rearrangement is a dominant densification mechanism for powder warm compaction, and the plastical deformation of particles plays an important role in offering accommodating deformation for particle rearrangement and densifying powder compact at the final stage of pressing.In order to attain density gain as high as possible during warm compaction, six rules for designing warm compacting powder mixtures were proposed in detail.展开更多
A compact laser plasma accelerator that is a novel accelerator based on the interaction of ultra-intense laser and plasmas is being built now at Peking University. According to the results of experiments and numerical...A compact laser plasma accelerator that is a novel accelerator based on the interaction of ultra-intense laser and plasmas is being built now at Peking University. According to the results of experiments and numerical simulations, a beam line combining the advantages of quadrupole and analyzing magnets is designed to deliver proton beams with energy ranging from 1 to 44MeV, energy spread within ±5% and 10^6-8 protons per pulse. It turns out that the existence of space charge force of protons can be ignored for the increase of transverse and longitudinal envelopes even in the case of 10^9 protons in one pulse. To cope with the challenge to obtain a uniform distribution of protons at the final experiment target in laser acceleration, we manipulate the envelope beam waist in the Y direction to a proper position and obtain a relatively good distribution uniformity of protons with an energy spread of 0-±5%0.展开更多
If the draught of each mill stand is limited by forced bite condition for compact continuous mill,the rolling load difference between one mill stand and another is very big.If deforming regulation of relative load for...If the draught of each mill stand is limited by forced bite condition for compact continuous mill,the rolling load difference between one mill stand and another is very big.If deforming regulation of relative load for each mill stand is approximate to the same,the productive capacity of compact continuous mill can be brought into full play,and also the safety running and the smooth rolling of mill can be ensured.展开更多
In order to overcome the main drawbacks of coaxial, waveguide, and stripline couplers, the analysis and the design of a compact coaxial-to-microstrip directional coupler convenient for power and antenna control applic...In order to overcome the main drawbacks of coaxial, waveguide, and stripline couplers, the analysis and the design of a compact coaxial-to-microstrip directional coupler convenient for power and antenna control application, are presented using the method of moments (MoM) in two dimensions. This technique is adapted to study the complex configuration of the line’s system, which does not have a simple analytical solution. The modeling of this structure consists in analyzing the primary inductive and capacitive matrices ([L] and [C]). When these matrices are determined, it is possible to calculate the inductive and capacitive coupling coefficients (kL and kC) and estimate the resulting scattering parameters of the coupler using an adapted numerical model. The coupler can be integrated into a printed circuit board (PCB) and operates over 17 to 35 dB coupling coefficients and is always compensated. The compensation is achieved by the proper displacement of a tuning ground plane with respect to the edge of the PCB from 0.1 to 3.3 mm. As an application, we present the design of a compact coupler with 7.5 × 4.8 × 25.8 mm of size and having approximately 20 dB of coupling coefficient at 2 GHz and a minimum directivity of 23.3 dB in the frequency range [0.1 - 4] GHz. In order to check our numerical calculations by the MoM we made simulations in 3D by using CST MICROWAVE STUDIO software for the same geometrical and physical parameters of our designed coupler. The results obtained by the two numerical models (MoM and CST) show a good agreement of the frequency responses of the coaxial-to-microstrip directional coupler. The studied structure represents a great improvement for high power measurement systems, since it has broad-band, good directivity, and can be easily designed and fabricated.展开更多
Some flow stress models was used to simulate the compaction of a cylindrical specimen.A new flow stress model was presented by analyzing and summarizing the powder compact experiment with different initial densities.C...Some flow stress models was used to simulate the compaction of a cylindrical specimen.A new flow stress model was presented by analyzing and summarizing the powder compact experiment with different initial densities.Compared with other models,the new model fits better with the experiments.The compaction process of a synchronizer hub was simulated with new model and the synchronizer hub shape was improved by the simulation results.The density distribution was measured and compared with the simulation results of splitting the samples into pieces.The comparison shows that the model could be used to simulate the powder compact process in an efficient and accurate manner.And the results indicate that the density distribution is homogenous after optimization.展开更多
Light emitting diode （LED） sources have been widely used for illumination. Optical design, especially freedom compact lens design is necessary to make LED sources applied in lighting industry, such as large-range in...Light emitting diode （LED） sources have been widely used for illumination. Optical design, especially freedom compact lens design is necessary to make LED sources applied in lighting industry, such as large-range interior lighting and small-range condensed lighting. For different lighting requirements, the size of target planes should be variable. In our paper we provide a method to design freedom lens according to the energy conservation law and Snell law through establishing energy mapping between the luminous flux emitted by a Lambertian LED source and a certain area of the target plane. The algorithm of our design can easily change the radius of each circular target plane, which makes the size of the target plane adjustable. Ray-tracing software Tracepro is used to validate the illuminance maps and polar-distribution maps. We design lenses for different sizes of target planes to meet specific lighting requirements.展开更多
In mould design, it is necessary for a designer to ensure that the cylinder has enough intensity in both the prestressed and synthesis states. An individual layer cylindrical mould cannot withstand a very high pressur...In mould design, it is necessary for a designer to ensure that the cylinder has enough intensity in both the prestressed and synthesis states. An individual layer cylindrical mould cannot withstand a very high pressure needed in polycrystalline diamond composite (PDC) production. So, multi-layer prepressure combination assemble moulds are often used. The analysis conducted here is to study the interaction of cylindrical layers and to explain how to obtain enough load capability with the lowest requirement of material performance. The ratio of the pressure cylinder radius of synthetic diamond is 3.27, which is close to the optimal value and can be used as structure size in a design for PDC bit compact die. There is a linear relationship between the internal and external pressures under a special tangent stress on the inner wall of the pressure cylinder. So, when two of the three parameters (the internal pressure, external pressure, and the requirement value of the tangent stress on the inner wall of the pressure cylinder) are given, the third can be obtained. The sleeve acts as a bridge?between the pressure cylinder and the steel belts. The optimum model developed in this paper can be used in PDC bit compact die design and other similar prestressed cold extrusion die design.展开更多
The maximum internal tangential stress is a critical parameter for the design of the PDC （polycrystalline diamond compact） die that has been widely applied to offshore oil drilling. A new simple equation for the cal...The maximum internal tangential stress is a critical parameter for the design of the PDC （polycrystalline diamond compact） die that has been widely applied to offshore oil drilling. A new simple equation for the calculation of the stress is developed, and verified by the test data from Kingdream Corp. of China, the largest bit Company in China. An opti- mum method for the design of the PDC die is presented and demonstrated in detail, and software for the design and FEM analysis of the die is developed on the basis of the method. This software has been used in oil industry in recent years.展开更多
文摘By phenomenological analysis of warm compaction, it is found that, compared with the contribution of particle plastical deformation to densification of powder compact,the particle rearrangement is a dominant densification mechanism for powder warm compaction, and the plastical deformation of particles plays an important role in offering accommodating deformation for particle rearrangement and densifying powder compact at the final stage of pressing.In order to attain density gain as high as possible during warm compaction, six rules for designing warm compacting powder mixtures were proposed in detail.
基金Supported by the National Natural Science Foundation of China under Grant No 11575011the National Grand Instrument Project under Grant No 2012YQ030142
文摘A compact laser plasma accelerator that is a novel accelerator based on the interaction of ultra-intense laser and plasmas is being built now at Peking University. According to the results of experiments and numerical simulations, a beam line combining the advantages of quadrupole and analyzing magnets is designed to deliver proton beams with energy ranging from 1 to 44MeV, energy spread within ±5% and 10^6-8 protons per pulse. It turns out that the existence of space charge force of protons can be ignored for the increase of transverse and longitudinal envelopes even in the case of 10^9 protons in one pulse. To cope with the challenge to obtain a uniform distribution of protons at the final experiment target in laser acceleration, we manipulate the envelope beam waist in the Y direction to a proper position and obtain a relatively good distribution uniformity of protons with an energy spread of 0-±5%0.
文摘If the draught of each mill stand is limited by forced bite condition for compact continuous mill,the rolling load difference between one mill stand and another is very big.If deforming regulation of relative load for each mill stand is approximate to the same,the productive capacity of compact continuous mill can be brought into full play,and also the safety running and the smooth rolling of mill can be ensured.
文摘In order to overcome the main drawbacks of coaxial, waveguide, and stripline couplers, the analysis and the design of a compact coaxial-to-microstrip directional coupler convenient for power and antenna control application, are presented using the method of moments (MoM) in two dimensions. This technique is adapted to study the complex configuration of the line’s system, which does not have a simple analytical solution. The modeling of this structure consists in analyzing the primary inductive and capacitive matrices ([L] and [C]). When these matrices are determined, it is possible to calculate the inductive and capacitive coupling coefficients (kL and kC) and estimate the resulting scattering parameters of the coupler using an adapted numerical model. The coupler can be integrated into a printed circuit board (PCB) and operates over 17 to 35 dB coupling coefficients and is always compensated. The compensation is achieved by the proper displacement of a tuning ground plane with respect to the edge of the PCB from 0.1 to 3.3 mm. As an application, we present the design of a compact coupler with 7.5 × 4.8 × 25.8 mm of size and having approximately 20 dB of coupling coefficient at 2 GHz and a minimum directivity of 23.3 dB in the frequency range [0.1 - 4] GHz. In order to check our numerical calculations by the MoM we made simulations in 3D by using CST MICROWAVE STUDIO software for the same geometrical and physical parameters of our designed coupler. The results obtained by the two numerical models (MoM and CST) show a good agreement of the frequency responses of the coaxial-to-microstrip directional coupler. The studied structure represents a great improvement for high power measurement systems, since it has broad-band, good directivity, and can be easily designed and fabricated.
基金Projects(50325516,50135020) supported by the National Natural Science Foundation of ChinaProject(003019) supported by the Natural Science Foundation of Guangdong Province,China
文摘Some flow stress models was used to simulate the compaction of a cylindrical specimen.A new flow stress model was presented by analyzing and summarizing the powder compact experiment with different initial densities.Compared with other models,the new model fits better with the experiments.The compaction process of a synchronizer hub was simulated with new model and the synchronizer hub shape was improved by the simulation results.The density distribution was measured and compared with the simulation results of splitting the samples into pieces.The comparison shows that the model could be used to simulate the powder compact process in an efficient and accurate manner.And the results indicate that the density distribution is homogenous after optimization.
基金Project supported by the State Key Development Program for Basic Research of China(Grant No.2011CB013101)
文摘Light emitting diode （LED） sources have been widely used for illumination. Optical design, especially freedom compact lens design is necessary to make LED sources applied in lighting industry, such as large-range interior lighting and small-range condensed lighting. For different lighting requirements, the size of target planes should be variable. In our paper we provide a method to design freedom lens according to the energy conservation law and Snell law through establishing energy mapping between the luminous flux emitted by a Lambertian LED source and a certain area of the target plane. The algorithm of our design can easily change the radius of each circular target plane, which makes the size of the target plane adjustable. Ray-tracing software Tracepro is used to validate the illuminance maps and polar-distribution maps. We design lenses for different sizes of target planes to meet specific lighting requirements.
文摘In mould design, it is necessary for a designer to ensure that the cylinder has enough intensity in both the prestressed and synthesis states. An individual layer cylindrical mould cannot withstand a very high pressure needed in polycrystalline diamond composite (PDC) production. So, multi-layer prepressure combination assemble moulds are often used. The analysis conducted here is to study the interaction of cylindrical layers and to explain how to obtain enough load capability with the lowest requirement of material performance. The ratio of the pressure cylinder radius of synthetic diamond is 3.27, which is close to the optimal value and can be used as structure size in a design for PDC bit compact die. There is a linear relationship between the internal and external pressures under a special tangent stress on the inner wall of the pressure cylinder. So, when two of the three parameters (the internal pressure, external pressure, and the requirement value of the tangent stress on the inner wall of the pressure cylinder) are given, the third can be obtained. The sleeve acts as a bridge?between the pressure cylinder and the steel belts. The optimum model developed in this paper can be used in PDC bit compact die design and other similar prestressed cold extrusion die design.
文摘The maximum internal tangential stress is a critical parameter for the design of the PDC （polycrystalline diamond compact） die that has been widely applied to offshore oil drilling. A new simple equation for the calculation of the stress is developed, and verified by the test data from Kingdream Corp. of China, the largest bit Company in China. An opti- mum method for the design of the PDC die is presented and demonstrated in detail, and software for the design and FEM analysis of the die is developed on the basis of the method. This software has been used in oil industry in recent years.
