The habitual use of smartphones during meals has become a common behavior,raising concerns about its potential impact on eating habits and metabolic health.The present narrative review investigates how using a smartph...The habitual use of smartphones during meals has become a common behavior,raising concerns about its potential impact on eating habits and metabolic health.The present narrative review investigates how using a smartphone or tablet during meals can cause distractions and negatively affect metabolic health.A comprehensive narrative review was conducted by synthesizing peer-reviewed studies on the interplay between smartphone use during meals,eating behaviors,and metabolic health.Relevant literature was identified through searches in electronic databases and organized thematically to highlight trends and research gaps.By synthesizing evidence from existing literature,this review highlights that smartphone use during meals is associated with increased caloric intake,altered food composition,and disruptions in postprandial metabolic responses.These effects are mediated by reduced meal awareness and psychological distractions,including multitasking.Variability in findings arises from differences in study designs and populations.This review identifies critical research gaps,including the lack of longitudinal studies and the need to explore mechanisms underlying these relationships.By summarizing trends and patterns,this narrative review offers valuable insights into the complex interplay between digital device use,eating habits,and metabolic health,providing a foundation for future research and interventions.展开更多
Time delay and integration （TDI） charge coupled device （CCD） noise sets a fundamental limit on image sensor performance, especially under low illumination in remote sensing applications. After introducing the comp...Time delay and integration （TDI） charge coupled device （CCD） noise sets a fundamental limit on image sensor performance, especially under low illumination in remote sensing applications. After introducing the complete sources of CCD noise, we study the effects of TDI operation mode on noise, and the relationship between different types of noise and number of the TDI stage. Then we propose a new technique to identify and measure sources of TDI CCD noise employing mathematical statistics theory, where theoretical analysis shows that noise estimated formulation converges well. Finally, we establish a testing platform to carry out experiments, and a standard TDI CCD is calibrated by using the proposed method. The experimental results show that the noise analysis and measurement methods presented in this paper are useful for modeling TDI CCDs.展开更多
The given article deals with the development of analytical model of request service process by multichannel technical system with unreliable, repaired and reconfigured service facilities. It is assumed that the system...The given article deals with the development of analytical model of request service process by multichannel technical system with unreliable, repaired and reconfigured service facilities. It is assumed that the system is functioning in service mode of random length random request flows. The system considers the existence of time redundancy for afterservice of calls, the service of which is interrupted with refusal, non-depreciating the performed part of the task. Special probability functions are introduced which on the basis of probability reasoning allow to make the systems of integral equations describing the dynamics of request service process.展开更多
Over the past decade, seismically induced damage to bridges has been widely reported following major earthquakes such as the 1994 Northridge, 1995 Kobe and 1999 Chi-Chi events. Since these earthquakes, restrainers and...Over the past decade, seismically induced damage to bridges has been widely reported following major earthquakes such as the 1994 Northridge, 1995 Kobe and 1999 Chi-Chi events. Since these earthquakes, restrainers and stoppers have been installed on bridges to prevent unseating and excessive displacements, respectively. Alternatively, column jacketing has also been proven to be effective. However, the enhanced shear strength may result in extra retrofitting works on the footing. For bridges damaged in the Chi-Chi earthquake, investigations revealed that most bridge columns experienced none-to-minor damage in the longitudinal direction. The reason for this unexpected performance was the construction practice of using a rubber bearing, which is an unbolted design that may slide under large lateral forces. In this paper, parametric studies on simply-supported bridges retrofitted by a restrainer or concrete shear key along the longitudinal and transverse axes were carried out. The research focuses on finding suitable combinations of the design force and gap spacing so the restrainer and concrete shear key can be used as an unseating prevention device, with respect to the allowable column damage in terms of displacement ductility under near-fault type earthquakes. A two-lane PCI-girder bridge was selected as the benchmark model. In the longitudinal direction, a total of nine combinations considering yielding strength and gap spacing for the restrainer were analyzed; while parameters for the concrete shear key were divided into three shear force levels and three gap spacings. In the transverse direction, a similar approach was adapted, except smaller gap spacing was used. For each of the above mentioned earthquakes, seven input ground motions were selected and their PGAs were adjusted to 0.36g and 0.45g as the Design earthquake and Maximum Considerable Earthquake, respectively. Based on the results of nonlinear time history analyses, proper parameters to design the restrainers and concrete shear keys are obtained. Responses obtained from numerical simulations under the Chi-Chi earthquake leaded to new implications to design those devices. Restrainer should not exceed its breaking strain and sufficient unseating length will be needed always. Concrete Shear key was determined by considering both displacement demand of the superstructure and displacement ductility of the column at the same time. Further study is needed to provide optimal design parameters for use in performance based bridge design.展开更多
This study was carried out to examine the development of an “elderly tele-nursing model” for care provided in-home by family members and through remote nursing systems in a super-aging society. This model studied th...This study was carried out to examine the development of an “elderly tele-nursing model” for care provided in-home by family members and through remote nursing systems in a super-aging society. This model studied the travel time, cost, and means of transportation of care providers. The pre-survey results regarding elderly tele-nursing show that a son/daughter can visit a parent more than once a week. In the results, the time required for elderly tele-nursing was influenced by whether or not the visitor uses the shinkansen （bullet train of Japan）. In the main survey, based on 40 questionnaires, clear differences were observed according to whether visits were “every two weeks” or “once per month”. Furthermore, this result was also indicated by t-tests.展开更多
Narrow bandwidth is a crucial factor in a high performance wavelength selective device(WSD). There are many different expressions to estimate bandwidths of many different WSDs. In this paper, we derive an important ...Narrow bandwidth is a crucial factor in a high performance wavelength selective device(WSD). There are many different expressions to estimate bandwidths of many different WSDs. In this paper, we derive an important rule that the differential time delay between two coupling modes is the most important factor deciding the wavelength channel bandwidth for several different WSDs. This rule reveals that larger differential time delay between two coupling modes results in higher discrimination level of the operating wavelength. Based on the rule, a novel design of wavelength selective coupler that has a bandwidth narrower than normal couplers is presented.展开更多
Solid descending and residence properties in COREX shaft furnace with a center gas supply device (CGSD) were studied using the discrete element method. Solid flow pattern, residence time distribution, and local solid ...Solid descending and residence properties in COREX shaft furnace with a center gas supply device (CGSD) were studied using the discrete element method. Solid flow pattern, residence time distribution, and local solid residence time (SRT) were analyzed. Moreover, the effects of the rotation speed of screws, the radius, and height of CGSD were investigated. The results show that the solid flow is dominantly a plug flow in the shaft furnace with the CGSD. In the upper region of the shaft furnace for gas-solid reduction, uniform distribution of local SRT is observed, which is preferable to match the even gas distribution expected due to the CGSD and slots. For different rotation speeds of the screws, the distribution of solid flow patterns is similar. The averaged residence time, dispersed plug volume fraction, and dead volume fraction decrease with increasing the rotation speed of the screws. The radius of the CGSD affects the solid residence in the shaft furnace. Local SRT above the CGSD increases with the increase in the radius of CGSD, possibly leading to the formation of more agglomerates. Hence, the radius of CGSD should be chosen carefully. The height of CGSD has a minor effect on solid residence in the shaft furnace.展开更多
In this paper, operator-based nonlinear water temperature control for a group of three connected microreactors actuated by Peltier devices is proposed. To control the water temperature of tube in the microreactor, the...In this paper, operator-based nonlinear water temperature control for a group of three connected microreactors actuated by Peltier devices is proposed. To control the water temperature of tube in the microreactor, the temperature change of aluminum effects is considered. Therefore, the temperature change of aluminum becomes the part of an input of the tube. First, nonlinear thermal models of aluminum plates and tubes that structure the microreactor are obtained. Then, an operator based nonlinear water temperature control system for the microreactor is designed. Finally, the effectiveness of the proposed models and methods is confirmed by simulation and experimental results.展开更多
Accuracy measurement of the Non-soluble Deposit Density (NSDD) on the insulator surface is very important for the transmission line anti-pollution flashover works. A method to measure the NSDD on double sheds porcelai...Accuracy measurement of the Non-soluble Deposit Density (NSDD) on the insulator surface is very important for the transmission line anti-pollution flashover works. A method to measure the NSDD on double sheds porcelain insulator surface based on laser transmission principle is proposed in this paper. Laser unit and luminous intensity sensor are installed between the up and down surface of the double sheds porcelain insulators, two glass tablets are put between the double sheds. The contamination on the glass tablets will influence the luminous intensity that reaches the intensity sensor. The luminous signal is changed to electrical signal, and the insulator’s NSDD could be obtained based on the difference of luminous intensity. The device can be used in online monitoring of the insulator's NSDD condition on the insulator surface.展开更多
Recent proposals of emerging data storage devices make it necessary to reevaluate all levels of the storage hierarchy to optimize the software stack performance.However,these new devices are not always widely availabl...Recent proposals of emerging data storage devices make it necessary to reevaluate all levels of the storage hierarchy to optimize the software stack performance.However,these new devices are not always widely available and therefore early experiments may be impossible.Emulators aim at mimicking as close as possible the behavior of a component,nonetheless,emulating new and fast storage devices is a challenging task due to time perception.In this work,we propose an approach to emulate storage devices using virtual machines(VMs)allowing the evaluation of a new device within a real system.We use a technique called freezing time,which pauses a VM to manipulate its clock and hide the real I/O completion time.Our approach is implemented at the hypervisor level and it is transparent to the vip operating system or application.We evaluate the technique under a real system using regular magnetic disks to emulate faster storage devices.Our method presented a latency error of 6.5%compared to a real device.Moreover,decoupled experiment between two laboratories,at the Barcelona Super Computing Center(BSC)in Spain,and the Center of Computer Science and Free Software(C3SL)in Brazil,demonstrated that our approach is reproducible and promising to allow the virtual evaluation of next-gen storage devices.展开更多
文摘The habitual use of smartphones during meals has become a common behavior,raising concerns about its potential impact on eating habits and metabolic health.The present narrative review investigates how using a smartphone or tablet during meals can cause distractions and negatively affect metabolic health.A comprehensive narrative review was conducted by synthesizing peer-reviewed studies on the interplay between smartphone use during meals,eating behaviors,and metabolic health.Relevant literature was identified through searches in electronic databases and organized thematically to highlight trends and research gaps.By synthesizing evidence from existing literature,this review highlights that smartphone use during meals is associated with increased caloric intake,altered food composition,and disruptions in postprandial metabolic responses.These effects are mediated by reduced meal awareness and psychological distractions,including multitasking.Variability in findings arises from differences in study designs and populations.This review identifies critical research gaps,including the lack of longitudinal studies and the need to explore mechanisms underlying these relationships.By summarizing trends and patterns,this narrative review offers valuable insights into the complex interplay between digital device use,eating habits,and metabolic health,providing a foundation for future research and interventions.
基金Project supported by the National High Technology Research and Development Program of China (Grant No. 2006AA06A208)
文摘Time delay and integration （TDI） charge coupled device （CCD） noise sets a fundamental limit on image sensor performance, especially under low illumination in remote sensing applications. After introducing the complete sources of CCD noise, we study the effects of TDI operation mode on noise, and the relationship between different types of noise and number of the TDI stage. Then we propose a new technique to identify and measure sources of TDI CCD noise employing mathematical statistics theory, where theoretical analysis shows that noise estimated formulation converges well. Finally, we establish a testing platform to carry out experiments, and a standard TDI CCD is calibrated by using the proposed method. The experimental results show that the noise analysis and measurement methods presented in this paper are useful for modeling TDI CCDs.
文摘The given article deals with the development of analytical model of request service process by multichannel technical system with unreliable, repaired and reconfigured service facilities. It is assumed that the system is functioning in service mode of random length random request flows. The system considers the existence of time redundancy for afterservice of calls, the service of which is interrupted with refusal, non-depreciating the performed part of the task. Special probability functions are introduced which on the basis of probability reasoning allow to make the systems of integral equations describing the dynamics of request service process.
文摘Over the past decade, seismically induced damage to bridges has been widely reported following major earthquakes such as the 1994 Northridge, 1995 Kobe and 1999 Chi-Chi events. Since these earthquakes, restrainers and stoppers have been installed on bridges to prevent unseating and excessive displacements, respectively. Alternatively, column jacketing has also been proven to be effective. However, the enhanced shear strength may result in extra retrofitting works on the footing. For bridges damaged in the Chi-Chi earthquake, investigations revealed that most bridge columns experienced none-to-minor damage in the longitudinal direction. The reason for this unexpected performance was the construction practice of using a rubber bearing, which is an unbolted design that may slide under large lateral forces. In this paper, parametric studies on simply-supported bridges retrofitted by a restrainer or concrete shear key along the longitudinal and transverse axes were carried out. The research focuses on finding suitable combinations of the design force and gap spacing so the restrainer and concrete shear key can be used as an unseating prevention device, with respect to the allowable column damage in terms of displacement ductility under near-fault type earthquakes. A two-lane PCI-girder bridge was selected as the benchmark model. In the longitudinal direction, a total of nine combinations considering yielding strength and gap spacing for the restrainer were analyzed; while parameters for the concrete shear key were divided into three shear force levels and three gap spacings. In the transverse direction, a similar approach was adapted, except smaller gap spacing was used. For each of the above mentioned earthquakes, seven input ground motions were selected and their PGAs were adjusted to 0.36g and 0.45g as the Design earthquake and Maximum Considerable Earthquake, respectively. Based on the results of nonlinear time history analyses, proper parameters to design the restrainers and concrete shear keys are obtained. Responses obtained from numerical simulations under the Chi-Chi earthquake leaded to new implications to design those devices. Restrainer should not exceed its breaking strain and sufficient unseating length will be needed always. Concrete Shear key was determined by considering both displacement demand of the superstructure and displacement ductility of the column at the same time. Further study is needed to provide optimal design parameters for use in performance based bridge design.
文摘This study was carried out to examine the development of an “elderly tele-nursing model” for care provided in-home by family members and through remote nursing systems in a super-aging society. This model studied the travel time, cost, and means of transportation of care providers. The pre-survey results regarding elderly tele-nursing show that a son/daughter can visit a parent more than once a week. In the results, the time required for elderly tele-nursing was influenced by whether or not the visitor uses the shinkansen （bullet train of Japan）. In the main survey, based on 40 questionnaires, clear differences were observed according to whether visits were “every two weeks” or “once per month”. Furthermore, this result was also indicated by t-tests.
文摘Narrow bandwidth is a crucial factor in a high performance wavelength selective device(WSD). There are many different expressions to estimate bandwidths of many different WSDs. In this paper, we derive an important rule that the differential time delay between two coupling modes is the most important factor deciding the wavelength channel bandwidth for several different WSDs. This rule reveals that larger differential time delay between two coupling modes results in higher discrimination level of the operating wavelength. Based on the rule, a novel design of wavelength selective coupler that has a bandwidth narrower than normal couplers is presented.
基金The authors would like to thank the National Natural Science Foundation of China (Grant No. 51804027)China Postdoctoral Science Foundation (Grant No. 2017M610769)Fundamental Research Funds for the Central Universities (Grant No. FRF-TP-17-036A1) for their financial supports.
文摘Solid descending and residence properties in COREX shaft furnace with a center gas supply device (CGSD) were studied using the discrete element method. Solid flow pattern, residence time distribution, and local solid residence time (SRT) were analyzed. Moreover, the effects of the rotation speed of screws, the radius, and height of CGSD were investigated. The results show that the solid flow is dominantly a plug flow in the shaft furnace with the CGSD. In the upper region of the shaft furnace for gas-solid reduction, uniform distribution of local SRT is observed, which is preferable to match the even gas distribution expected due to the CGSD and slots. For different rotation speeds of the screws, the distribution of solid flow patterns is similar. The averaged residence time, dispersed plug volume fraction, and dead volume fraction decrease with increasing the rotation speed of the screws. The radius of the CGSD affects the solid residence in the shaft furnace. Local SRT above the CGSD increases with the increase in the radius of CGSD, possibly leading to the formation of more agglomerates. Hence, the radius of CGSD should be chosen carefully. The height of CGSD has a minor effect on solid residence in the shaft furnace.
文摘In this paper, operator-based nonlinear water temperature control for a group of three connected microreactors actuated by Peltier devices is proposed. To control the water temperature of tube in the microreactor, the temperature change of aluminum effects is considered. Therefore, the temperature change of aluminum becomes the part of an input of the tube. First, nonlinear thermal models of aluminum plates and tubes that structure the microreactor are obtained. Then, an operator based nonlinear water temperature control system for the microreactor is designed. Finally, the effectiveness of the proposed models and methods is confirmed by simulation and experimental results.
文摘Accuracy measurement of the Non-soluble Deposit Density (NSDD) on the insulator surface is very important for the transmission line anti-pollution flashover works. A method to measure the NSDD on double sheds porcelain insulator surface based on laser transmission principle is proposed in this paper. Laser unit and luminous intensity sensor are installed between the up and down surface of the double sheds porcelain insulators, two glass tablets are put between the double sheds. The contamination on the glass tablets will influence the luminous intensity that reaches the intensity sensor. The luminous signal is changed to electrical signal, and the insulator’s NSDD could be obtained based on the difference of luminous intensity. The device can be used in online monitoring of the insulator's NSDD condition on the insulator surface.
基金supported by the Spanish Ministry of Science and Innovation under the TIN2015-65316 Grantthe Generalitat de Catalunya under contract 2014-SGR-1051+1 种基金the Serrapilheira Institute(Grant number Serra-1709-16621)as well as the European Union’s Horizon 2020 Research and Innovation Programme,under Grant Agreement no.671951(NEXTGenIO)for the extensions added after the MASCOTS paper.
文摘Recent proposals of emerging data storage devices make it necessary to reevaluate all levels of the storage hierarchy to optimize the software stack performance.However,these new devices are not always widely available and therefore early experiments may be impossible.Emulators aim at mimicking as close as possible the behavior of a component,nonetheless,emulating new and fast storage devices is a challenging task due to time perception.In this work,we propose an approach to emulate storage devices using virtual machines(VMs)allowing the evaluation of a new device within a real system.We use a technique called freezing time,which pauses a VM to manipulate its clock and hide the real I/O completion time.Our approach is implemented at the hypervisor level and it is transparent to the vip operating system or application.We evaluate the technique under a real system using regular magnetic disks to emulate faster storage devices.Our method presented a latency error of 6.5%compared to a real device.Moreover,decoupled experiment between two laboratories,at the Barcelona Super Computing Center(BSC)in Spain,and the Center of Computer Science and Free Software(C3SL)in Brazil,demonstrated that our approach is reproducible and promising to allow the virtual evaluation of next-gen storage devices.
