Self-excited longitudinal combustion instabilities were investigated in a hypergolic liquid bipropellant combustor, which applied single dual-swirl coaxial injector. Hot-fire tests were conducted for four different in...Self-excited longitudinal combustion instabilities were investigated in a hypergolic liquid bipropellant combustor, which applied single dual-swirl coaxial injector. Hot-fire tests were conducted for four different injector geometries, while extensive tests on injection conditions were carried out for each injector geometry. The synchronous measurement of the pressure and heat release rate was applied, successfully capturing the process of the pressure and heat release rate enhanced coupling and developing into in-phase oscillation. By calculating Rayleigh index at the head and middle section of the chamber, it is shown that Rayleigh index of the middle section is even higher than that of the head, indicating a long heat release zone. When the combustion instability occurs, the pressure in propellant manifolds also oscillates with the same frequency and lags behind the oscillation in the combustor. Compared to the oscillation in the outer injector manifold, the oscillation in the inner injector manifold shows a higher correlation with that in the chamber in amplitude and phase. Based on numerical simulations of the multiphase cold flow inside the injector and combustion process in the chamber, it is found that injector geometries affect longitudinal combustion instability by changing spray cone angle. The spray with small cone angle is more sensitive to the modulation of longitudinal pressure wave in combustion simulations, which is more likely to excite the longitudinal combustion instability. Meanwhile, the combustion instability may be related to the pulsating coherent structure generated by the spray fluctuation, which is determined by injection conditions. Besides, a positive feedback closed-loop system associated with the active fluctuation and passive oscillation of the spray is believed to excite and sustain the longitudinal combustion instability.展开更多
This study introduced an innovative numerical approach to examine combustion instability in Solid Rocket Motors(SRMs).The paper commenced with the derivation of a transient model for the solid propellant's condens...This study introduced an innovative numerical approach to examine combustion instability in Solid Rocket Motors(SRMs).The paper commenced with the derivation of a transient model for the solid propellant's condensed phase,followed by its numerical discretization.Subsequently,this model was integrated with gas phase computations of the chamber's internal flow field,encompassing fluid dynamics and combustion processes.The precision of the numerical method was validated by experimental data,and its reliability was confirmed through a grid independence analysis.The study then investigated the motor's stability under various operating conditions,revealing the impact of parameters such as the sensitivity coefficient of the burning rate to temperature and the nozzle throat diameter on the motor's stability.The results confirmed the bistable nature of combustion instability in specific regions.For instance,when the sensitivity coefficients of burning rate to ambient temperature(k_(1))ranged from 1.4 to 1.8,the SRM adopted in this study with a throat diameter of 0.12 m remained stable under small disturbances but triggered instability under large disturbances.Moreover,increasing the value of k_(1)and reducing the throat diameter can exacerbate combustion instability,leading to more pronounced nonlinear characteristics.The numerical method developed in this paper could effectively capture the nonlinear features of the combustion instability occurring in the motor,providing guidance for SRMs design.展开更多
Combustion instability of pilot flame has been investigated in a model pilot bluff body stabilized combustor by running the pilot flame only. The primary objectives are to investigate the pilot flame dynamics and to p...Combustion instability of pilot flame has been investigated in a model pilot bluff body stabilized combustor by running the pilot flame only. The primary objectives are to investigate the pilot flame dynamics and to provide bases for the study of the interaction mechanisms between the pilot flame and the main flame. Dynamic pressures are measured by dynamic pressure transduc- ers. A high speed camera with CH＊ bandpass filter is used to capture the pilot flame dynamics. The proper orthogonal decomposition （POD） is used to further analyze the high speed images. With the increase of the pilot fuel mass flow rate, the pilot flame changes from stable to unstable state grad- ually. The combustion instability frequency is 136 Hz when the pilot flame is unstable. Numerical simulation results show that the equivalence ratios in both the shear layer and the recirculation zone increase as the pilot fuel mass flow rate increases. The mechanism of the instability of the pilot flame can be attributed to the coupling between the second order acoustic mode and the unsteady heat release due to symmetric vortex shedding. These results illustrate that the pilot fuel mass flow rate has significant influences on the dynamic stability of the pilot flame.展开更多
The problem of evaluating the sensitivity of non-trivial boundary conditions to the onset of azimuthal combustion instability is a longstanding challenge in the development process of modern gas turbines.The difficult...The problem of evaluating the sensitivity of non-trivial boundary conditions to the onset of azimuthal combustion instability is a longstanding challenge in the development process of modern gas turbines.The difficulty lies in how to describe three-dimensional in-and outlet boundary conditions in an artificial computational domain.To date,the existing analytical models have still failed to quantitatively explain why the features of the azimuthal combustion instability of a combustor in laboratory environment are quite different from that in a real gas turbine,making the stability control devices developed in laboratory generally lose the effectiveness in practical applications.To overcome this limitation,we provide a novel theoretical framework to directly include the effect of non-trivial boundary conditions on the azimuthal combustion instability.A key step is to take the non-trivial boundary conditions as equivalent distributed sources so as to uniformly describe the physical characteristics of the inner surface in an annular enclosure along with different in-and outlet configurations.Meanwhile,a dispersion relation equation is established by the application of three-dimensional Green's function approach and generalized impedance concept.Results show that the effects of the generalized modal reflection coefficients on azimuthal unstable modes are extremely prominent,and even prompt the transition from stable to unstable mode,thus reasonably explaining why the thermoacoustic instability phenomena in a real gas turbine are difficult to observe in an isolated combustion chamber.Overall,this work provides an effective tool for analysis of the azimuthal combustion instability including various complicated boundary conditions.展开更多
The operational demands of a wide range significantly exacerbate combustion instability issues within ramjet combustor.To suppress combustion oscillations,an open-loop control system utilizing Linear Genetic Programmi...The operational demands of a wide range significantly exacerbate combustion instability issues within ramjet combustor.To suppress combustion oscillations,an open-loop control system utilizing Linear Genetic Programming(LGP)has been developed for a full-scale annular ramjet combustor.The LGP is used to generate control laws that include multi-frequency forcing.These laws are then transformed into square waves to actuate the solenoid valve,which modulates the kerosene supply for open-loop control.The results show that the duty cycle has little effect on instability amplitude,whereas an increase in frequency leads to a remarked reduction in combustion amplitude.After five generations evolvements,the pressure amplitude is reduced by 40.6% under the optimal control law generated by LGP.Furthermore,the machine learning process is depicted using a proximity map of control law similarity,with the search pathway visualized by the steepest descent.All individuals go forward to the upper left corner of the map with the evolution process,terminating at the optimal individual of the fifth generation.展开更多
Turbulent two-phase reacting flow in the chamber of LOX/RP-1 bipropellant liquid rocket engine is numerically investigated in this paper. The predicted pressure and mean axial velocity are qualitatively consistent wit...Turbulent two-phase reacting flow in the chamber of LOX/RP-1 bipropellant liquid rocket engine is numerically investigated in this paper. The predicted pressure and mean axial velocity are qualitatively consistent with the experimental measurements. The self-excited pressure oscillations are obtained without any disturbance introduced through the initial and boundary conditions. It is found that amount of abrupt pressure peaks appear frequently and stochastically in the head regions of the chamber, which are the important sources to drive and strengthen combustion instability. Such abrupt pressures are induced by local constant volume combustion, because local combustible gas mixtures with high temperature are formed and burnt out suddenly due to some fuel droplets reaching their critical state in a rich oxygen surrounding. A third Damkhler number is defined as the ratio of the characteristic time of a chemical reaction to the characteristic time of a pressure wave expansion to measure the relative intensity of acoustic propagation and combustion process in thrusters. The analysis of the third Damkhler number distributions in the whole thrust chamber shows that local constant volume combustion happens in the head regions, while constant pressure combustion presents in the downstream regions. It is found that the combustion instability occurs in the head regions within about 30 mm from the thruster head.展开更多
Swirl combustion serves as a helpful flame stabilization method,which also affects the combustion and emission characteristics.This article experimentally investigated the effects of CO_(2)microjets on combustion inst...Swirl combustion serves as a helpful flame stabilization method,which also affects the combustion and emission characteristics.This article experimentally investigated the effects of CO_(2)microjets on combustion instability and NO_(x)emissions in lean premixed flames with different swirl numbers.The microjets’control feasibility was examined from three variables of CO_(2)jet flow rate,thermal power,and swirl angles.Results indicate that microjets can mitigate the combustion instability and NO_(x)emissions in lean premixed burners with different swirl numbers and thermal power.Still,the damping effect of microjets in low swirl intensity is better than that in high swirl intensity.The damping ratio of pressure amplitude can reach the maximum of 98%,and NO_(x)emissions can realize the maximum reduction of 10.1×10^(−6)at the swirl angle of 30°.Besides,the flame macrostructure switches from an inverted cone shape to a petal shape,and the flame length reduction at low swirl intensity is higher than that of high swirl intensity.This research clarified the control differences of mitigation of combustion instability and NO_(x)emissions by microjets in lean premixed flames with different swirl numbers,contributing to the optimization of microjets control and the construction of high-performance burners.展开更多
Combustion dynamics are a critical factor in determining the performance and reliabilityof a chemical propulsion engine.The underlying processes include liquid atomization,evaporation,mixing,and chemical reactions.Thi...Combustion dynamics are a critical factor in determining the performance and reliabilityof a chemical propulsion engine.The underlying processes include liquid atomization,evaporation,mixing,and chemical reactions.This paper presents a high-fidelity numerical study of liquidatomization and spray combustion under high-pressure conditions,emphasizing the effects of pres-sure oscillations on the flow evolution and combustion dynamics.The theoretical framework isbased on the three-dimensional conservation equations for multiphase flows and turbulent combus-tion.The numerical solution is achieved using a coupling method of volume-of-fluid and Lagran-gian particle tracking.The Zhuang-Kadota-Sutton(ZKS)high-pressure evaporation model andthe eddy breakup-Arrhenius combustion model are employed.Simulations are conducted for amodel combustion chamber with impinging-jet injectors using liquid oxygen and kerosene as pro-pellants.Both conditions with and without inlet and outlet pressure oscillations are considered.Thefindings reveal that pressure oscillations amplify flow fluctuations and can be characterized usingkey physical parameters such as droplet evaporation,chemical reaction,and chamber pressure.The spectral analysis uncovers the axial variations of the dominant and secondary frequenciesand their amplitudes in terms of the characteristic physical quantities.This research helps establisha methodology for exploring the coupling effect of liquid atomization and spray combustion.It alsoprovides practical insights into their responses to pressure oscillations during the occurrence ofcombustion instability.This information can be used to enhance the design and operation ofliquid-fueled propulsion engines.展开更多
This paper describes an experimental study investigating the effects of sinusoidal pulsed injection on the combustion mode transition in a dual-mode supersonic combustor.The results are obtained under inflow condition...This paper describes an experimental study investigating the effects of sinusoidal pulsed injection on the combustion mode transition in a dual-mode supersonic combustor.The results are obtained under inflow conditions of 2.9 MPa stagnation pressure,1900 K stagnation temperature,and Mach number of 3.0.It has been observed that,at the same equivalence ratio,the combustion mode and flow field structure undergo irreversible changes from a weak combustion state to a strong combustion state at a specific pulsed jet frequency compared to steady jet.For steady jet,the combustion mode is dual-mode.As the frequency of the unsteady jet changes,the combustion mode also changes:it becomes a transition mode at frequencies of 171 Hz and 260 Hz,and a ramjet mode at 216 Hz.Combustion instability under steady jet manifests as a transition in flame stabilization mode.In contrast,under pulsed jet,combustion instability appears either as a transition in flame stabilization mode or as flame blow-off and flashback.The flow field oscillation frequency in the non-reacting flow is 171 Hz,which may resonate with the 171 Hz pulsed jet frequency,making the combustion oscillations most pronounced at this frequency.When the jet frequency is increased to 216 Hz,the combustion intensity significantly increases,and the combustion mode transfers to the ramjet mode.However,further increasing the frequency to 260 Hz results in a decrease in combustion intensity,returning to the transition mode.The frequency of the flow field oscillations varies with the coupling of the pulsed injection frequency,shock wave,and flame,and if the system reaches an unstable state,that is,pre-combustion shock train moves far upstream of the isolator during the pulsed jet period,strong combustion state can be achieved,and this process is irreversible.展开更多
This paper presents an experimental study on the emission characteristics and combustion instabilities of oxy-fuel combustions in a swirl-stabilized combustor. Different oxygen concentrations (Xoxy=25%～45%, where Xox...This paper presents an experimental study on the emission characteristics and combustion instabilities of oxy-fuel combustions in a swirl-stabilized combustor. Different oxygen concentrations (Xoxy=25%～45%, where Xoxy is oxygen concentra- tion by volume), equivalence ratios (φ=0.75～1.15) and combustion powers (CP=1.08～2.02 kW) were investigated in the oxy-fuel (CH4/CO2/O2) combustions, and reference cases (Xoxy=25%～35%, CH4/N2/O2 flames) were covered. The results show that the oxygen concentration in the oxidant stream significantly affects the combustion delay in the oxy-fuel flames, and the equivalence ratio has a slight effect, whereas the combustion power shows no impact. The temperature levels of the oxy-fuel flames inside the combustion chamber are much higher (up to 38.7%) than those of the reference cases. Carbon monoxide was vastly produced when Xoxy>35% or φ>0.95 in the oxy-fuel flames, while no nitric oxide was found in the exhaust gases because no N2 participates in the combustion process. The combustion instability of the oxy-fuel combustion is very different from those of the reference cases with similar oxygen content. Oxy-fuel combustions excite strong oscillations in all cases studied Xoxy=25%～45%. However, no pressure fluctuations were detected in the reference cases when Xoxy>28.6% accomplished by heavily sooting flames which were not found in the oxy-fuel combustions. Spectrum analysis shows that the frequency of dynamic pressure oscillations exhibits randomness in the range of 50～250 Hz, therefore resulting in a very small resultant amplitude. Temporal oscillations are very strong with amplitudes larger than 200 Pa, even short time fast Fourier transform (FFT) analysis (0.08 s) shows that the pressure amplitude can be larger than 40 Pa.展开更多
The instable combustion or oscillation combustion which occurs in three high capacity solid rocket motors using high energy composite propellant with finocyl grain is studied. The reasons of the acoustic combustion in...The instable combustion or oscillation combustion which occurs in three high capacity solid rocket motors using high energy composite propellant with finocyl grain is studied. The reasons of the acoustic combustion instability are also discussed. Three engineering methods that can eliminate combustion instability are proposed and discussed. The study shows that the combustion instability mainly depends on the propellant grain shape and nozzle structure. Some measures to reduce the acoustic energy and mass generation rate of combustion gas can be adopted. The test results indicate that the modified rocket motors can significantly eliminate the instable combustion and improve the motor internal ballistic performance.展开更多
Our study identifies a subtle deviation from Newton’s third law in the derivation of the ideal rocket equation, also known as the Tsiolkovsky Rocket Equation (TRE). TRE can be derived using a 1D elastic collision mod...Our study identifies a subtle deviation from Newton’s third law in the derivation of the ideal rocket equation, also known as the Tsiolkovsky Rocket Equation (TRE). TRE can be derived using a 1D elastic collision model of the momentum exchange between the differential propellant mass element (dm) and the rocket final mass (m1), in which dm initially travels forward to collide with m1 and rebounds to exit through the exhaust nozzle with a velocity that is known as the effective exhaust velocity ve. We observe that such a model does not explain how dm was able to acquire its initial forward velocity without the support of a reactive mass traveling in the opposite direction. We show instead that the initial kinetic energy of dm is generated from dm itself by a process of self-combustion and expansion. In our ideal rocket with a single particle dm confined inside a hollow tube with one closed end, we show that the process of self-combustion and expansion of dm will result in a pair of differential particles each with a mass dm/2, and each traveling away from one another along the tube axis, from the center of combustion. These two identical particles represent the active and reactive sub-components of dm, co-generated in compliance with Newton’s third law of equal action and reaction. Building on this model, we derive a linear momentum ODE of the system, the solution of which yields what we call the Revised Tsiolkovsky Rocket Equation (RTRE). We show that RTRE has a mathematical form that is similar to TRE, with the exception of the effective exhaust velocity (ve) term. The ve term in TRE is replaced in RTRE by the average of two distinct exhaust velocities that we refer to as fast-jet, vx<sub>1</sub>, and slow-jet, vx<sub>2</sub>. These two velocities correspond, respectively, to the velocities of the detonation pressure wave that is vectored directly towards the exhaust nozzle, and the retonation wave that is initially vectored in the direction of rocket propagation, but subsequently becomes reflected from the thrust surface of the combustion chamber to exit through the exhaust nozzle with a time lag behind the detonation wave. The detonation-retonation phenomenon is supported by experimental evidence in the published literature. Finally, we use a convolution model to simulate the composite exhaust pressure wave, highlighting the frequency spectrum of the pressure perturbations that are generated by the mutual interference between the fast-jet and slow-jet components. Our analysis offers insights into the origin of combustion oscillations in rocket engines, with possible extensions beyond rocket engineering into other fields of combustion engineering.展开更多
The effectiveness of perforated liner with bias flow on the control of combustion instability is investigated.Combustion instabilities result from the coupling between acoustic waves and unsteady combustion heat relea...The effectiveness of perforated liner with bias flow on the control of combustion instability is investigated.Combustion instabilities result from the coupling between acoustic waves and unsteady combustion heat release.Sometimes the phenomenon happens in afterburners of aeroengine and rocket engine,and it always causes damage to flame holders,liner seetions and other engine components.Passive methods,such as perforated liner,are often used to suppress such instabilities in application.In this article,first,a burner testbed is built in order to study the characteristic of this phenomenon.The unstable frequencies and unsta-ble area are investigated experimentally.Then an analytical model,based on"transfer element method",is developed and the numerical results are compared with those from experiments.At last the perforated liner is applied to the burner to suppress the instabilities.The results show that the sound pressure can be greatly reduced by the perforated liner.展开更多
This study investigates the mixing enhancement mechanism and propagation characteristics of the detonation flow field of a Rotating Detonation Engine(RDE).Three-dimensional numerical simulations of a non-premixed ramj...This study investigates the mixing enhancement mechanism and propagation characteristics of the detonation flow field of a Rotating Detonation Engine(RDE).Three-dimensional numerical simulations of a non-premixed ramjet-based RDE fueled by gaseous ethylene are performed in OpenFOAM for configurations with 15,30,45,and 60 orifices at a flight Mach number of 4.The results show that fuels with a stripped distribution are primarily mixed via tangential diffusion in the cold flow field.The configuration with more orifices has a better upstream mixing efficiency,whereas its downstream mixing efficiency,which is limited by the depth of penetration,is difficult to improve further.Backward Pressure Perturbations(BPPs)opposite to the propagation direction of Rotating Detonation Waves(RDWs)are produced by the reflection of the upstream oblique shock wave with the incoming stream and the hot release of local reactions after RDWs,which significantly affects the propagation mode and mixing.The RDWs propagate in the stable single-wave mode in configurations with 45 or 60 orifices and in the multi-wave mode in configurations with 30 orifices,whereas they fail in configurations with 15 orifices.Compared with that in the cold flow field,deceleration of the main flow,pressurization,and tangential velocity perturbation caused by the RDW substantially enhance the mixing efficiency.Moreover,the tangential velocity perturbations of upstream oblique shock waves and BPPs reduce the unevenness of the fuel distribution for the next cycle.This study reveals the mixing enhancement mechanism of RDWs and can contribute to the design of the injection scheme of the RDE.展开更多
Vortex-acoustic coupling is one of the most important potential sources of combustion instability in solid rocket motors （SRMs）. Based on the Von Karman Institute for Fluid Dynamics （VKI） experimental motor, the i...Vortex-acoustic coupling is one of the most important potential sources of combustion instability in solid rocket motors （SRMs）. Based on the Von Karman Institute for Fluid Dynamics （VKI） experimental motor, the influence of the thermal inhibitor position and temperature on vortex-shedding-driven pressure oscillations is numerically studied via the large eddy simulation （LES） method. The simulation results demonstrate that vortex shedding is a periodic process and its accurate frequency can be numerically obtained. Acoustic modes could be easily excited by vortex shedding. The vortex shedding frequency and second acoustic frequency dominate the pressure oscillation characteristics in the chamber. Thermal inhibitor position and gas temperature have little effect on vortex shedding frequency, but have great impact on pressure oscillation amplitude. Pressure amplitude is much higher when the thermal inhibitor locates at the acoustic velocity anti-nodes. The farther the thermal inhibitor is to the nozzle head, the more vortex energy would be dissipated by the turbulence. Therefore, the vortex shedding amplitude at the second acoustic velocity antinode near 3/4L （L is chamber length） is larger than those of others. Besides, the natural acoustic frequencies increase with the gas temperature. As the vortex shedding frequency departs from the natural acoustic frequency, the vortex-acoustic feedback loop is decoupled. Consequently, both the vortex shedding and acoustic amplitudes decrease rapidly.展开更多
While analytical solutions of critical(phase)transitions in dynamical systems are abundant for simple nonlinear systems,such analysis remains intractable for real-life dynamical systems.A key example is thermoacoustic...While analytical solutions of critical(phase)transitions in dynamical systems are abundant for simple nonlinear systems,such analysis remains intractable for real-life dynamical systems.A key example is thermoacoustic insta-bility in combustion,where prediction or early detection of the onset of instability is a hard technical challenge,which needs to be addressed to build safer and more energy-efficient gas turbine engines powering aerospace and energy industries.The instabilities arising in combustion chambers of engines are mathematically too complex to model.To address this issue in a data-driven manner instead,we propose a novel deep learning architecture called 3D convolutional selective autoencoder(3D-CSAE)to detect the evolution of self-excited oscillations using spatiotemporal data,i.e.,hi-speed videos taken from a swirl-stabilized combustor(laboratory surrogate of gas turbine engine combustor).3D-CSAE consists of filters to learn,in a hierarchical fashion,the complex visual and dynamic features related to combustion instability from the training videos(i.e.,two spatial dimensions for the image frames and the third dimension for time).We train the 3D-CSAE on frames of videos obtained from a limited set of operating conditions.We select the 3D-CSAE hyper-parameters that are effective for characterizing hierarchical and multiscale instability structure evolution by utilizing the dynamic information available in the video.The proposed model clearly shows performance improvement in detecting the precursors and the onset of instability.The machine learning-driven results are verified with physics-based off-line measures.Advanced active control mechanisms can directly leverage the proposed online detection capability of 3D-CSAE to mitigate the adverse effects of combustion instabilities on the engine operating under various stringent requirements and conditions.展开更多
In this study,flame responses to acoustic disturbances with different frequencies and amplitudes were experimentally investigated in a lean premixed swirl-stabilized combustor operating at different bulk velocities.Th...In this study,flame responses to acoustic disturbances with different frequencies and amplitudes were experimentally investigated in a lean premixed swirl-stabilized combustor operating at different bulk velocities.The total heat release rate fluctuations and spatial CH*chemiluminescence distributions were captured using a photomultiplier tube and high-speed camera,respectively.The results indicate that the heat release rate exhibits a relatively drastic oscillation and high-order harmonics for low-frequency disturbances.When the bulk velocity and forcing frequency were doubled simultaneously,similar flame structures were observed in the CH*chemiluminescence distributions.As the bulk velocity increases,the gain of the Flame Describing Function(FDF)extends toward the higher frequencies,and the delay time of the flame response decreases.The similarity among FDFs at different bulk velocities was effectively captured by introducing a non-dimensional parameter,defined as the ratio of the flame response delay to the forcing time scale,to replace the dimensional forcing frequency.Furthermore,the availability of the newly defined non-dimensional parameter was verified for flames with different swirl numbers,as this played an important role in determining the flame structures and associated unsteady heat release rate.展开更多
Combustion instability is a very important issue in the development of the propulsion systems used in aerospace. It is very important to associate the high frequency combustion instabilities with the acoustic characte...Combustion instability is a very important issue in the development of the propulsion systems used in aerospace. It is very important to associate the high frequency combustion instabilities with the acoustic characteristics of the combustion chamber. In this paper, the effects of various baffle injectors which were installed on the injector faceplate on the first-order tangential acoustic mode were investigated theoretically and experimentally. The effects of the gap between adjacent injectors on the first-order tangential acoustic mode in a cylindrical chamber were considered. The acoustic admittance of the injectors was derived. The results showed that the amplitude and frequency of the first-order tangential acoustic mode increase with the increase in the gap between adjacent injectors, but decrease with the increase in the number and height of the baffles.The baffle injectors have a greater influence on the amplitude and frequency of the first-order tangential acoustic mode than the baffle blades.展开更多
Recent research and development on ramjet and supersonic combustion ramjet(scramjet)engines is concerned with producing greater thrust,higher speed,or lower emission.This is most likely driven by the fact that superso...Recent research and development on ramjet and supersonic combustion ramjet(scramjet)engines is concerned with producing greater thrust,higher speed,or lower emission.This is most likely driven by the fact that supersonic/hypersonic propulsion systems have a broad range of applications in military sectors.The performances of such supersonic/hypersonic propulsion systems depend on a series of physical and thermodynamic parameters,such as the fuel types,flight conditions,geometries and sizes of the engines,engine inlet pressure/velocity.As a propulsion system,a stable and efficient combustion is desirable.However,self-excited large-amplitude combustion oscillations(also known as combustion instabilities)have been observed in liquid-and solid-propellant ramjet and scramjet engines,which may be due to acoustic resonance between inlet and nozzle,vortex kinematics(large coherent structures),and acoustic-convective wave coupling mechanisms due to combustion.Such intensified pressure oscillations are undesirable,since they can lead to violent structural vibration,and overheating.How to enhance and predict the engines'stability behaviors is another challenge for engine manufacturers.The present work surveys the research and development in ramjet combustion and combustion instabilities in ramjet engines.Typical active and passive controls of ramjet combustion instabilities are then reviewed.To support this review,a case study of combustion instability in solid-fueled ramjet is provided.The popular mode decomposition algorithms such as DMD(dynamic mode decomposition)and POD(proper orthogonal decomposition)are discussed and applied to shed lights on the ramjet combustion instability in the present case study.展开更多
In the last few years intensive experimental investigations were performed at the University of Karlsruhe to develop an analytical model for the Helmholtz resonator-type combustion system. In the present work the reso...In the last few years intensive experimental investigations were performed at the University of Karlsruhe to develop an analytical model for the Helmholtz resonator-type combustion system. In the present work the resonance characteristics of a Helmholtz resonator-type combustion chamber were investigated using large-eddy simulations (LES), to understand better the flow effects in the chamber and to localize the dissipation. In this paper the results of the LES are presented, which show good agreement with the experiments. The comparison of the LES study with the experiments sheds light on the significant role of the wall roughness in the exhaust gas pipe.展开更多
基金support from the National Natural Science Foundation of China(No.12002386).
文摘Self-excited longitudinal combustion instabilities were investigated in a hypergolic liquid bipropellant combustor, which applied single dual-swirl coaxial injector. Hot-fire tests were conducted for four different injector geometries, while extensive tests on injection conditions were carried out for each injector geometry. The synchronous measurement of the pressure and heat release rate was applied, successfully capturing the process of the pressure and heat release rate enhanced coupling and developing into in-phase oscillation. By calculating Rayleigh index at the head and middle section of the chamber, it is shown that Rayleigh index of the middle section is even higher than that of the head, indicating a long heat release zone. When the combustion instability occurs, the pressure in propellant manifolds also oscillates with the same frequency and lags behind the oscillation in the combustor. Compared to the oscillation in the outer injector manifold, the oscillation in the inner injector manifold shows a higher correlation with that in the chamber in amplitude and phase. Based on numerical simulations of the multiphase cold flow inside the injector and combustion process in the chamber, it is found that injector geometries affect longitudinal combustion instability by changing spray cone angle. The spray with small cone angle is more sensitive to the modulation of longitudinal pressure wave in combustion simulations, which is more likely to excite the longitudinal combustion instability. Meanwhile, the combustion instability may be related to the pulsating coherent structure generated by the spray fluctuation, which is determined by injection conditions. Besides, a positive feedback closed-loop system associated with the active fluctuation and passive oscillation of the spray is believed to excite and sustain the longitudinal combustion instability.
基金supported by the National Natural Science Foundation of China(No.U2241250)。
文摘This study introduced an innovative numerical approach to examine combustion instability in Solid Rocket Motors(SRMs).The paper commenced with the derivation of a transient model for the solid propellant's condensed phase,followed by its numerical discretization.Subsequently,this model was integrated with gas phase computations of the chamber's internal flow field,encompassing fluid dynamics and combustion processes.The precision of the numerical method was validated by experimental data,and its reliability was confirmed through a grid independence analysis.The study then investigated the motor's stability under various operating conditions,revealing the impact of parameters such as the sensitivity coefficient of the burning rate to temperature and the nozzle throat diameter on the motor's stability.The results confirmed the bistable nature of combustion instability in specific regions.For instance,when the sensitivity coefficients of burning rate to ambient temperature(k_(1))ranged from 1.4 to 1.8,the SRM adopted in this study with a throat diameter of 0.12 m remained stable under small disturbances but triggered instability under large disturbances.Moreover,increasing the value of k_(1)and reducing the throat diameter can exacerbate combustion instability,leading to more pronounced nonlinear characteristics.The numerical method developed in this paper could effectively capture the nonlinear features of the combustion instability occurring in the motor,providing guidance for SRMs design.
文摘Combustion instability of pilot flame has been investigated in a model pilot bluff body stabilized combustor by running the pilot flame only. The primary objectives are to investigate the pilot flame dynamics and to provide bases for the study of the interaction mechanisms between the pilot flame and the main flame. Dynamic pressures are measured by dynamic pressure transduc- ers. A high speed camera with CH＊ bandpass filter is used to capture the pilot flame dynamics. The proper orthogonal decomposition （POD） is used to further analyze the high speed images. With the increase of the pilot fuel mass flow rate, the pilot flame changes from stable to unstable state grad- ually. The combustion instability frequency is 136 Hz when the pilot flame is unstable. Numerical simulation results show that the equivalence ratios in both the shear layer and the recirculation zone increase as the pilot fuel mass flow rate increases. The mechanism of the instability of the pilot flame can be attributed to the coupling between the second order acoustic mode and the unsteady heat release due to symmetric vortex shedding. These results illustrate that the pilot fuel mass flow rate has significant influences on the dynamic stability of the pilot flame.
基金supported by the Science Center for Gas Turbine Project of China (No.P2022-B-II-013-001)the National Natural Science Foundation of China (No.52106038).
文摘The problem of evaluating the sensitivity of non-trivial boundary conditions to the onset of azimuthal combustion instability is a longstanding challenge in the development process of modern gas turbines.The difficulty lies in how to describe three-dimensional in-and outlet boundary conditions in an artificial computational domain.To date,the existing analytical models have still failed to quantitatively explain why the features of the azimuthal combustion instability of a combustor in laboratory environment are quite different from that in a real gas turbine,making the stability control devices developed in laboratory generally lose the effectiveness in practical applications.To overcome this limitation,we provide a novel theoretical framework to directly include the effect of non-trivial boundary conditions on the azimuthal combustion instability.A key step is to take the non-trivial boundary conditions as equivalent distributed sources so as to uniformly describe the physical characteristics of the inner surface in an annular enclosure along with different in-and outlet configurations.Meanwhile,a dispersion relation equation is established by the application of three-dimensional Green's function approach and generalized impedance concept.Results show that the effects of the generalized modal reflection coefficients on azimuthal unstable modes are extremely prominent,and even prompt the transition from stable to unstable mode,thus reasonably explaining why the thermoacoustic instability phenomena in a real gas turbine are difficult to observe in an isolated combustion chamber.Overall,this work provides an effective tool for analysis of the azimuthal combustion instability including various complicated boundary conditions.
基金support from the National Natural Science Foundation of China(No.12002372)the Young Elite Scientists Sponsorship Program by China Association for Science and Technology(No.2022QNRC001)the Natural Science Foundation of Hunan Province,China(No.2021JJ40674)。
文摘The operational demands of a wide range significantly exacerbate combustion instability issues within ramjet combustor.To suppress combustion oscillations,an open-loop control system utilizing Linear Genetic Programming(LGP)has been developed for a full-scale annular ramjet combustor.The LGP is used to generate control laws that include multi-frequency forcing.These laws are then transformed into square waves to actuate the solenoid valve,which modulates the kerosene supply for open-loop control.The results show that the duty cycle has little effect on instability amplitude,whereas an increase in frequency leads to a remarked reduction in combustion amplitude.After five generations evolvements,the pressure amplitude is reduced by 40.6% under the optimal control law generated by LGP.Furthermore,the machine learning process is depicted using a proximity map of control law similarity,with the search pathway visualized by the steepest descent.All individuals go forward to the upper left corner of the map with the evolution process,terminating at the optimal individual of the fifth generation.
基金supported by the National Natural Science Foundation of China(Grant No.50706021)
文摘Turbulent two-phase reacting flow in the chamber of LOX/RP-1 bipropellant liquid rocket engine is numerically investigated in this paper. The predicted pressure and mean axial velocity are qualitatively consistent with the experimental measurements. The self-excited pressure oscillations are obtained without any disturbance introduced through the initial and boundary conditions. It is found that amount of abrupt pressure peaks appear frequently and stochastically in the head regions of the chamber, which are the important sources to drive and strengthen combustion instability. Such abrupt pressures are induced by local constant volume combustion, because local combustible gas mixtures with high temperature are formed and burnt out suddenly due to some fuel droplets reaching their critical state in a rich oxygen surrounding. A third Damkhler number is defined as the ratio of the characteristic time of a chemical reaction to the characteristic time of a pressure wave expansion to measure the relative intensity of acoustic propagation and combustion process in thrusters. The analysis of the third Damkhler number distributions in the whole thrust chamber shows that local constant volume combustion happens in the head regions, while constant pressure combustion presents in the downstream regions. It is found that the combustion instability occurs in the head regions within about 30 mm from the thruster head.
基金This work was supported by the National Science Fund for Distinguished Young Scholars(Grant 51825605).
文摘Swirl combustion serves as a helpful flame stabilization method,which also affects the combustion and emission characteristics.This article experimentally investigated the effects of CO_(2)microjets on combustion instability and NO_(x)emissions in lean premixed flames with different swirl numbers.The microjets’control feasibility was examined from three variables of CO_(2)jet flow rate,thermal power,and swirl angles.Results indicate that microjets can mitigate the combustion instability and NO_(x)emissions in lean premixed burners with different swirl numbers and thermal power.Still,the damping effect of microjets in low swirl intensity is better than that in high swirl intensity.The damping ratio of pressure amplitude can reach the maximum of 98%,and NO_(x)emissions can realize the maximum reduction of 10.1×10^(−6)at the swirl angle of 30°.Besides,the flame macrostructure switches from an inverted cone shape to a petal shape,and the flame length reduction at low swirl intensity is higher than that of high swirl intensity.This research clarified the control differences of mitigation of combustion instability and NO_(x)emissions by microjets in lean premixed flames with different swirl numbers,contributing to the optimization of microjets control and the construction of high-performance burners.
基金supported by the National Natural Science Foundation of China(Nos.U23B6009 and 12272050)。
文摘Combustion dynamics are a critical factor in determining the performance and reliabilityof a chemical propulsion engine.The underlying processes include liquid atomization,evaporation,mixing,and chemical reactions.This paper presents a high-fidelity numerical study of liquidatomization and spray combustion under high-pressure conditions,emphasizing the effects of pres-sure oscillations on the flow evolution and combustion dynamics.The theoretical framework isbased on the three-dimensional conservation equations for multiphase flows and turbulent combus-tion.The numerical solution is achieved using a coupling method of volume-of-fluid and Lagran-gian particle tracking.The Zhuang-Kadota-Sutton(ZKS)high-pressure evaporation model andthe eddy breakup-Arrhenius combustion model are employed.Simulations are conducted for amodel combustion chamber with impinging-jet injectors using liquid oxygen and kerosene as pro-pellants.Both conditions with and without inlet and outlet pressure oscillations are considered.Thefindings reveal that pressure oscillations amplify flow fluctuations and can be characterized usingkey physical parameters such as droplet evaporation,chemical reaction,and chamber pressure.The spectral analysis uncovers the axial variations of the dominant and secondary frequenciesand their amplitudes in terms of the characteristic physical quantities.This research helps establisha methodology for exploring the coupling effect of liquid atomization and spray combustion.It alsoprovides practical insights into their responses to pressure oscillations during the occurrence ofcombustion instability.This information can be used to enhance the design and operation ofliquid-fueled propulsion engines.
基金supported by the Program of Key Laboratory of Cross-Domain Flight Interdisciplinary Technology,China(No.2023-ZY0205)。
文摘This paper describes an experimental study investigating the effects of sinusoidal pulsed injection on the combustion mode transition in a dual-mode supersonic combustor.The results are obtained under inflow conditions of 2.9 MPa stagnation pressure,1900 K stagnation temperature,and Mach number of 3.0.It has been observed that,at the same equivalence ratio,the combustion mode and flow field structure undergo irreversible changes from a weak combustion state to a strong combustion state at a specific pulsed jet frequency compared to steady jet.For steady jet,the combustion mode is dual-mode.As the frequency of the unsteady jet changes,the combustion mode also changes:it becomes a transition mode at frequencies of 171 Hz and 260 Hz,and a ramjet mode at 216 Hz.Combustion instability under steady jet manifests as a transition in flame stabilization mode.In contrast,under pulsed jet,combustion instability appears either as a transition in flame stabilization mode or as flame blow-off and flashback.The flow field oscillation frequency in the non-reacting flow is 171 Hz,which may resonate with the 171 Hz pulsed jet frequency,making the combustion oscillations most pronounced at this frequency.When the jet frequency is increased to 216 Hz,the combustion intensity significantly increases,and the combustion mode transfers to the ramjet mode.However,further increasing the frequency to 260 Hz results in a decrease in combustion intensity,returning to the transition mode.The frequency of the flow field oscillations varies with the coupling of the pulsed injection frequency,shock wave,and flame,and if the system reaches an unstable state,that is,pre-combustion shock train moves far upstream of the isolator during the pulsed jet period,strong combustion state can be achieved,and this process is irreversible.
基金Project supported by the National Natural Science Foundation of China (No. 50576081)Zhejiang Provincial Natural Science Foundation of China (No. R107532)+1 种基金Program for the New Century Excellent Talents in University (No. NCET-07-0761)the Foundation for the Author of National Excellent Doctoral Dissertation of China (No. 200747)
文摘This paper presents an experimental study on the emission characteristics and combustion instabilities of oxy-fuel combustions in a swirl-stabilized combustor. Different oxygen concentrations (Xoxy=25%～45%, where Xoxy is oxygen concentra- tion by volume), equivalence ratios (φ=0.75～1.15) and combustion powers (CP=1.08～2.02 kW) were investigated in the oxy-fuel (CH4/CO2/O2) combustions, and reference cases (Xoxy=25%～35%, CH4/N2/O2 flames) were covered. The results show that the oxygen concentration in the oxidant stream significantly affects the combustion delay in the oxy-fuel flames, and the equivalence ratio has a slight effect, whereas the combustion power shows no impact. The temperature levels of the oxy-fuel flames inside the combustion chamber are much higher (up to 38.7%) than those of the reference cases. Carbon monoxide was vastly produced when Xoxy>35% or φ>0.95 in the oxy-fuel flames, while no nitric oxide was found in the exhaust gases because no N2 participates in the combustion process. The combustion instability of the oxy-fuel combustion is very different from those of the reference cases with similar oxygen content. Oxy-fuel combustions excite strong oscillations in all cases studied Xoxy=25%～45%. However, no pressure fluctuations were detected in the reference cases when Xoxy>28.6% accomplished by heavily sooting flames which were not found in the oxy-fuel combustions. Spectrum analysis shows that the frequency of dynamic pressure oscillations exhibits randomness in the range of 50～250 Hz, therefore resulting in a very small resultant amplitude. Temporal oscillations are very strong with amplitudes larger than 200 Pa, even short time fast Fourier transform (FFT) analysis (0.08 s) shows that the pressure amplitude can be larger than 40 Pa.
文摘The instable combustion or oscillation combustion which occurs in three high capacity solid rocket motors using high energy composite propellant with finocyl grain is studied. The reasons of the acoustic combustion instability are also discussed. Three engineering methods that can eliminate combustion instability are proposed and discussed. The study shows that the combustion instability mainly depends on the propellant grain shape and nozzle structure. Some measures to reduce the acoustic energy and mass generation rate of combustion gas can be adopted. The test results indicate that the modified rocket motors can significantly eliminate the instable combustion and improve the motor internal ballistic performance.
文摘Our study identifies a subtle deviation from Newton’s third law in the derivation of the ideal rocket equation, also known as the Tsiolkovsky Rocket Equation (TRE). TRE can be derived using a 1D elastic collision model of the momentum exchange between the differential propellant mass element (dm) and the rocket final mass (m1), in which dm initially travels forward to collide with m1 and rebounds to exit through the exhaust nozzle with a velocity that is known as the effective exhaust velocity ve. We observe that such a model does not explain how dm was able to acquire its initial forward velocity without the support of a reactive mass traveling in the opposite direction. We show instead that the initial kinetic energy of dm is generated from dm itself by a process of self-combustion and expansion. In our ideal rocket with a single particle dm confined inside a hollow tube with one closed end, we show that the process of self-combustion and expansion of dm will result in a pair of differential particles each with a mass dm/2, and each traveling away from one another along the tube axis, from the center of combustion. These two identical particles represent the active and reactive sub-components of dm, co-generated in compliance with Newton’s third law of equal action and reaction. Building on this model, we derive a linear momentum ODE of the system, the solution of which yields what we call the Revised Tsiolkovsky Rocket Equation (RTRE). We show that RTRE has a mathematical form that is similar to TRE, with the exception of the effective exhaust velocity (ve) term. The ve term in TRE is replaced in RTRE by the average of two distinct exhaust velocities that we refer to as fast-jet, vx<sub>1</sub>, and slow-jet, vx<sub>2</sub>. These two velocities correspond, respectively, to the velocities of the detonation pressure wave that is vectored directly towards the exhaust nozzle, and the retonation wave that is initially vectored in the direction of rocket propagation, but subsequently becomes reflected from the thrust surface of the combustion chamber to exit through the exhaust nozzle with a time lag behind the detonation wave. The detonation-retonation phenomenon is supported by experimental evidence in the published literature. Finally, we use a convolution model to simulate the composite exhaust pressure wave, highlighting the frequency spectrum of the pressure perturbations that are generated by the mutual interference between the fast-jet and slow-jet components. Our analysis offers insights into the origin of combustion oscillations in rocket engines, with possible extensions beyond rocket engineering into other fields of combustion engineering.
基金National Natural Science Foundation of China(50890181)Aeronautical Science Foundation of China(2009ZB51)
文摘The effectiveness of perforated liner with bias flow on the control of combustion instability is investigated.Combustion instabilities result from the coupling between acoustic waves and unsteady combustion heat release.Sometimes the phenomenon happens in afterburners of aeroengine and rocket engine,and it always causes damage to flame holders,liner seetions and other engine components.Passive methods,such as perforated liner,are often used to suppress such instabilities in application.In this article,first,a burner testbed is built in order to study the characteristic of this phenomenon.The unstable frequencies and unsta-ble area are investigated experimentally.Then an analytical model,based on"transfer element method",is developed and the numerical results are compared with those from experiments.At last the perforated liner is applied to the burner to suppress the instabilities.The results show that the sound pressure can be greatly reduced by the perforated liner.
基金supported from support from the National Natural Science Foundation of China(Nos.12441204,12302451 and 1202491)the Postgraduate Scientific Research Innovation Project of Hunan Province,China(No.CX20210075)。
文摘This study investigates the mixing enhancement mechanism and propagation characteristics of the detonation flow field of a Rotating Detonation Engine(RDE).Three-dimensional numerical simulations of a non-premixed ramjet-based RDE fueled by gaseous ethylene are performed in OpenFOAM for configurations with 15,30,45,and 60 orifices at a flight Mach number of 4.The results show that fuels with a stripped distribution are primarily mixed via tangential diffusion in the cold flow field.The configuration with more orifices has a better upstream mixing efficiency,whereas its downstream mixing efficiency,which is limited by the depth of penetration,is difficult to improve further.Backward Pressure Perturbations(BPPs)opposite to the propagation direction of Rotating Detonation Waves(RDWs)are produced by the reflection of the upstream oblique shock wave with the incoming stream and the hot release of local reactions after RDWs,which significantly affects the propagation mode and mixing.The RDWs propagate in the stable single-wave mode in configurations with 45 or 60 orifices and in the multi-wave mode in configurations with 30 orifices,whereas they fail in configurations with 15 orifices.Compared with that in the cold flow field,deceleration of the main flow,pressurization,and tangential velocity perturbation caused by the RDW substantially enhance the mixing efficiency.Moreover,the tangential velocity perturbations of upstream oblique shock waves and BPPs reduce the unevenness of the fuel distribution for the next cycle.This study reveals the mixing enhancement mechanism of RDWs and can contribute to the design of the injection scheme of the RDE.
基金the National Natural Science Foundation of China (Grant No.51076015)
文摘Vortex-acoustic coupling is one of the most important potential sources of combustion instability in solid rocket motors （SRMs）. Based on the Von Karman Institute for Fluid Dynamics （VKI） experimental motor, the influence of the thermal inhibitor position and temperature on vortex-shedding-driven pressure oscillations is numerically studied via the large eddy simulation （LES） method. The simulation results demonstrate that vortex shedding is a periodic process and its accurate frequency can be numerically obtained. Acoustic modes could be easily excited by vortex shedding. The vortex shedding frequency and second acoustic frequency dominate the pressure oscillation characteristics in the chamber. Thermal inhibitor position and gas temperature have little effect on vortex shedding frequency, but have great impact on pressure oscillation amplitude. Pressure amplitude is much higher when the thermal inhibitor locates at the acoustic velocity anti-nodes. The farther the thermal inhibitor is to the nozzle head, the more vortex energy would be dissipated by the turbulence. Therefore, the vortex shedding amplitude at the second acoustic velocity antinode near 3/4L （L is chamber length） is larger than those of others. Besides, the natural acoustic frequencies increase with the gas temperature. As the vortex shedding frequency departs from the natural acoustic frequency, the vortex-acoustic feedback loop is decoupled. Consequently, both the vortex shedding and acoustic amplitudes decrease rapidly.
文摘While analytical solutions of critical(phase)transitions in dynamical systems are abundant for simple nonlinear systems,such analysis remains intractable for real-life dynamical systems.A key example is thermoacoustic insta-bility in combustion,where prediction or early detection of the onset of instability is a hard technical challenge,which needs to be addressed to build safer and more energy-efficient gas turbine engines powering aerospace and energy industries.The instabilities arising in combustion chambers of engines are mathematically too complex to model.To address this issue in a data-driven manner instead,we propose a novel deep learning architecture called 3D convolutional selective autoencoder(3D-CSAE)to detect the evolution of self-excited oscillations using spatiotemporal data,i.e.,hi-speed videos taken from a swirl-stabilized combustor(laboratory surrogate of gas turbine engine combustor).3D-CSAE consists of filters to learn,in a hierarchical fashion,the complex visual and dynamic features related to combustion instability from the training videos(i.e.,two spatial dimensions for the image frames and the third dimension for time).We train the 3D-CSAE on frames of videos obtained from a limited set of operating conditions.We select the 3D-CSAE hyper-parameters that are effective for characterizing hierarchical and multiscale instability structure evolution by utilizing the dynamic information available in the video.The proposed model clearly shows performance improvement in detecting the precursors and the onset of instability.The machine learning-driven results are verified with physics-based off-line measures.Advanced active control mechanisms can directly leverage the proposed online detection capability of 3D-CSAE to mitigate the adverse effects of combustion instabilities on the engine operating under various stringent requirements and conditions.
基金supported by the National Natural Science Foundation of China (Nos. 51676111 and U1730104)National Science and Technology Major Project, China (No.2017-III-0005-0030)the Tsinghua University Initiative Scientific Research Program, China (No. 2014Z05091)
文摘In this study,flame responses to acoustic disturbances with different frequencies and amplitudes were experimentally investigated in a lean premixed swirl-stabilized combustor operating at different bulk velocities.The total heat release rate fluctuations and spatial CH*chemiluminescence distributions were captured using a photomultiplier tube and high-speed camera,respectively.The results indicate that the heat release rate exhibits a relatively drastic oscillation and high-order harmonics for low-frequency disturbances.When the bulk velocity and forcing frequency were doubled simultaneously,similar flame structures were observed in the CH*chemiluminescence distributions.As the bulk velocity increases,the gain of the Flame Describing Function(FDF)extends toward the higher frequencies,and the delay time of the flame response decreases.The similarity among FDFs at different bulk velocities was effectively captured by introducing a non-dimensional parameter,defined as the ratio of the flame response delay to the forcing time scale,to replace the dimensional forcing frequency.Furthermore,the availability of the newly defined non-dimensional parameter was verified for flames with different swirl numbers,as this played an important role in determining the flame structures and associated unsteady heat release rate.
基金the National Natural Science Foundation of China (Nos. 51806057, 52005152 and 12042211)the Natural Science Foundation of Hebei, China (Nos. E2019202460 and E2019202451)+2 种基金Tianjin Science and Technology Project, China (No. 19YFZCSF00850)the Key Research Program Projects of Hebei Province, China (No. 19274502D)the Industrial Technology Research of Hebei University of Technology, China (No. ZBYJY201902)
文摘Combustion instability is a very important issue in the development of the propulsion systems used in aerospace. It is very important to associate the high frequency combustion instabilities with the acoustic characteristics of the combustion chamber. In this paper, the effects of various baffle injectors which were installed on the injector faceplate on the first-order tangential acoustic mode were investigated theoretically and experimentally. The effects of the gap between adjacent injectors on the first-order tangential acoustic mode in a cylindrical chamber were considered. The acoustic admittance of the injectors was derived. The results showed that the amplitude and frequency of the first-order tangential acoustic mode increase with the increase in the gap between adjacent injectors, but decrease with the increase in the number and height of the baffles.The baffle injectors have a greater influence on the amplitude and frequency of the first-order tangential acoustic mode than the baffle blades.
基金financially supported by the University of Canterbury,New Zealand with grant No.452DISDZ。
文摘Recent research and development on ramjet and supersonic combustion ramjet(scramjet)engines is concerned with producing greater thrust,higher speed,or lower emission.This is most likely driven by the fact that supersonic/hypersonic propulsion systems have a broad range of applications in military sectors.The performances of such supersonic/hypersonic propulsion systems depend on a series of physical and thermodynamic parameters,such as the fuel types,flight conditions,geometries and sizes of the engines,engine inlet pressure/velocity.As a propulsion system,a stable and efficient combustion is desirable.However,self-excited large-amplitude combustion oscillations(also known as combustion instabilities)have been observed in liquid-and solid-propellant ramjet and scramjet engines,which may be due to acoustic resonance between inlet and nozzle,vortex kinematics(large coherent structures),and acoustic-convective wave coupling mechanisms due to combustion.Such intensified pressure oscillations are undesirable,since they can lead to violent structural vibration,and overheating.How to enhance and predict the engines'stability behaviors is another challenge for engine manufacturers.The present work surveys the research and development in ramjet combustion and combustion instabilities in ramjet engines.Typical active and passive controls of ramjet combustion instabilities are then reviewed.To support this review,a case study of combustion instability in solid-fueled ramjet is provided.The popular mode decomposition algorithms such as DMD(dynamic mode decomposition)and POD(proper orthogonal decomposition)are discussed and applied to shed lights on the ramjet combustion instability in the present case study.
文摘In the last few years intensive experimental investigations were performed at the University of Karlsruhe to develop an analytical model for the Helmholtz resonator-type combustion system. In the present work the resonance characteristics of a Helmholtz resonator-type combustion chamber were investigated using large-eddy simulations (LES), to understand better the flow effects in the chamber and to localize the dissipation. In this paper the results of the LES are presented, which show good agreement with the experiments. The comparison of the LES study with the experiments sheds light on the significant role of the wall roughness in the exhaust gas pipe.
