In order to investigate the optimal foam dyeing process and the compatibility of trichromatic reactive dyes in foam dyeing,varying proportions of ternary mixtures of Remazol Red RGB,Remazol Yellow RGB and Remazol Navy...In order to investigate the optimal foam dyeing process and the compatibility of trichromatic reactive dyes in foam dyeing,varying proportions of ternary mixtures of Remazol Red RGB,Remazol Yellow RGB and Remazol Navy RGB have been used to dye bleached cotton fabric.The results showed that,the optimal dyeing condition in foam dyeing was alkaline agent 15 g/L,stabilizers 0.7g/L,blow ratio 8,and steaming time 1.5 min,respectively.Compared with conventional pad-dyeing,color strength and fixation rate of dyed fabric were higher than those of conventional paddyeing,the dyed fabric had the same washing and rubbing fastness as conventional pad-dyeing and the color shade of dyed fabric was different from that of conventional pad-dyeing.The color triangle,which consisted of 66 dyed fabric samples dyed with trichromatic reactive dyes in different proportions,could provide foundation for computer colorant formulation of the color matching system.展开更多
Reactive dyes with different reactive groups exhibit different hydrolysis and dyeing behaviors.This is particularly evident in the combination dyeing process,where the competion between hydrolysis and dyeing reactions...Reactive dyes with different reactive groups exhibit different hydrolysis and dyeing behaviors.This is particularly evident in the combination dyeing process,where the competion between hydrolysis and dyeing reactions increases the complexity.Therefore,developing an effective method to monitor the changes in reactive dyes during the dyeing process is important.This study aims to develop a capillary electrophoresis(CE)technique combined with an ultraviolet(UV)detector(CE-UV)for detecting three reactive dyes and their six derivatives(a total of nine analytes).The optimized CE conditions are 20.0 mmol/L sodium tetraborate(Na_(2)B_(4)O_(7)·10H_(2)O),acetonitrile(ACN)with a volume fraction of 15.0%,20.0 mmol/L α-cyclodextrin(α-CD),and at a pH value of 9.0(adjusted with 0.5 mol/L H_(3)BO_(3)).The limit of detection(LOD)(a signal-to-noise ratio of 3)for the nine analytes ranges from 1.38 to 5.06 mg/L.The relative standard deviations(RSDs)for peak areas and migration time are 2.19%-4.96%and 0.29%-2.75%,respectively.The method is capable of accurately identifying three reactive dyes and their six derivatives and monitoring alterations in composition and dyeing behavior during single and combination dyeing processes.展开更多
文摘In order to investigate the optimal foam dyeing process and the compatibility of trichromatic reactive dyes in foam dyeing,varying proportions of ternary mixtures of Remazol Red RGB,Remazol Yellow RGB and Remazol Navy RGB have been used to dye bleached cotton fabric.The results showed that,the optimal dyeing condition in foam dyeing was alkaline agent 15 g/L,stabilizers 0.7g/L,blow ratio 8,and steaming time 1.5 min,respectively.Compared with conventional pad-dyeing,color strength and fixation rate of dyed fabric were higher than those of conventional paddyeing,the dyed fabric had the same washing and rubbing fastness as conventional pad-dyeing and the color shade of dyed fabric was different from that of conventional pad-dyeing.The color triangle,which consisted of 66 dyed fabric samples dyed with trichromatic reactive dyes in different proportions,could provide foundation for computer colorant formulation of the color matching system.
基金Research Foundation from National Innovation Center of Advanced Dyeing&Finishing Technology,China(No.2022GCJJ15)。
文摘Reactive dyes with different reactive groups exhibit different hydrolysis and dyeing behaviors.This is particularly evident in the combination dyeing process,where the competion between hydrolysis and dyeing reactions increases the complexity.Therefore,developing an effective method to monitor the changes in reactive dyes during the dyeing process is important.This study aims to develop a capillary electrophoresis(CE)technique combined with an ultraviolet(UV)detector(CE-UV)for detecting three reactive dyes and their six derivatives(a total of nine analytes).The optimized CE conditions are 20.0 mmol/L sodium tetraborate(Na_(2)B_(4)O_(7)·10H_(2)O),acetonitrile(ACN)with a volume fraction of 15.0%,20.0 mmol/L α-cyclodextrin(α-CD),and at a pH value of 9.0(adjusted with 0.5 mol/L H_(3)BO_(3)).The limit of detection(LOD)(a signal-to-noise ratio of 3)for the nine analytes ranges from 1.38 to 5.06 mg/L.The relative standard deviations(RSDs)for peak areas and migration time are 2.19%-4.96%and 0.29%-2.75%,respectively.The method is capable of accurately identifying three reactive dyes and their six derivatives and monitoring alterations in composition and dyeing behavior during single and combination dyeing processes.
