The paper aims to demonstrate the system of SANYI biogas power generation by two-step method which can produce methane and generate electricity effectively and stably.So it can be stable synchronization meshwork energ...The paper aims to demonstrate the system of SANYI biogas power generation by two-step method which can produce methane and generate electricity effectively and stably.So it can be stable synchronization meshwork energy source establishment and provide references to develop an effective and stable project of producing methane and generating electricity.展开更多
The innovative Next Generation Subsea Production System(NextGen SPS)concept is a newly proposed petroleum development solution in ultra-deep water areas.The definition of NextGen SPS involves several disciplines,which...The innovative Next Generation Subsea Production System(NextGen SPS)concept is a newly proposed petroleum development solution in ultra-deep water areas.The definition of NextGen SPS involves several disciplines,which makes the design process difficult.In this paper,the definition of NextGen SPS is modeled as an uncertain multidisciplinary design optimization(MDO)problem.The deterministic optimization model is formulated,and three concerning disciplines—cost calculation,hydrodynamic analysis and global performance analysis are presented.Surrogate model technique is applied in the latter two disciplines.Collaborative optimization(CO)architecture is utilized to organize the concerning disciplines.A deterministic CO framework with two disciplinelevel optimizations is proposed firstly.Then the uncertainties of design parameters and surrogate models are incorporated by using interval method,and uncertain CO frameworks with triple loop and double loop optimization structure are established respectively.The optimization results illustrate that,although the deterministic MDO result achieves higher reduction in objective function than the uncertain MDO result,the latter is more reliable than the former.展开更多
A simple and highly accurate semi-analytical method, called the differential transformation method(DTM), was used for solving the nonlinear temperature distribution equation in solid and porous longitudinal fin with t...A simple and highly accurate semi-analytical method, called the differential transformation method(DTM), was used for solving the nonlinear temperature distribution equation in solid and porous longitudinal fin with temperature dependent internal heat generation. The problem was solved for two main cases. In the first case, heat generation was assumed variable by fin temperature for a solid fin and in second heat generation varied with temperature for a porous fin. Results are presented for the temperature distribution for a range of values of parameters appearing in the mathematical formulation(e.g. N, εG, and G). Results reveal that DTM is very effective and convenient. Also, it is found that this method can achieve more suitable results in comparison to numerical methods.展开更多
An efficient Advancing Layer Method(ALM)is presented to create semi-structured prisms on viscous walls,in which a procedure that checks possible front intersections is essential to its efficiency.This paper develops v...An efficient Advancing Layer Method(ALM)is presented to create semi-structured prisms on viscous walls,in which a procedure that checks possible front intersections is essential to its efficiency.This paper develops various novel schemes to improve the algorithm’s efficiency precisely while not sacrificing its robustness and the resulting mesh quality.First,it employs a set of new techniques,and data structures are developed to improve the efficiency of the frontcheck procedure.Then,within each octant,a new filter is developed to reduce the intersection computations in the searching process.In addition,data structures are well designed to store the contiguously accessed data in each computing-intensive loop in a contiguous space for a potentially better cache hit ratio.We built a geometry model library formed by examples of industrial complexity to demonstrate the practicability of the algorithm.All the efforts mentioned above enable us to reduce the percentage of computing time taken by intersection check to an acceptable level(approximately 26%),which make it no longer be the most time-consuming part.展开更多
The boundary mesh of the casting model was determined by direct calculation on the triangular facets extracted from the STL file of the 3D model. Then the inner and outer grids of the model were identified by the algo...The boundary mesh of the casting model was determined by direct calculation on the triangular facets extracted from the STL file of the 3D model. Then the inner and outer grids of the model were identified by the algorithm in which we named Inner Seed Grid Method. Finally, a program to automatically generate a 3D FDM mesh was compiled. In the paper, a method named Triangle Contraction Search Method (TCSM) was put forward to ensure not losing the boundary grids; while an algorithm to search inner seed grids to identify inner/outer grids of the casting model was also brought forward. Our algorithm was simple, clear and easy to construct program. Three examples for the casting mesh generation testified the validity of the program.展开更多
In order to provide a guidance to specify the element size dynamically during adaptive finite element mesh generation, adaptive criteria are firstly defined according to the relationships between the geometrical featu...In order to provide a guidance to specify the element size dynamically during adaptive finite element mesh generation, adaptive criteria are firstly defined according to the relationships between the geometrical features and the elements of 3D solid. Various modes based on different datum geometrical elements, such as vertex, curve, surface, and so on, are then designed for generating local refined mesh. With the guidance of the defmed criteria, different modes are automatically selected to apply on the appropriate datum objects to program the element size in the local special areas. As a result, the control information of element size is successfully programmed covering the entire domain based on the geometrical features of 3D solid. A new algorithm based on Delatmay triangulation is then developed for generating 3D adaptive finite element mesh, in which the element size is dynamically specified to catch the geometrical features and suitable tetrahedron facets are selected to locate interior nodes continuously. As a result, adaptive mesh with good-quality elements is generated. Examples show that the proposed method can be successfully applied to adaptive finite element mesh automatic generation based on the geometrical features of 3D solid.展开更多
Based on the“three box”exergy analysis model,a black box-gray box hierarchical exergy analysis and evaluation method is put forward in this paper,which is applied to evaluate the power generation technology of diffe...Based on the“three box”exergy analysis model,a black box-gray box hierarchical exergy analysis and evaluation method is put forward in this paper,which is applied to evaluate the power generation technology of differential pressure produced by natural gas expansion.By using the exergy analysis theory,the black box-gray box hierarchical exergy analysis models of three differential pressure power generation technologies are established respectively.Firstly,the“black box”analysis models of main energy consuming equipment are established,and then the“gray box”analysis model of the total system is established.Based on the calculation results of exergy analysis indexes,the weak energy consumption equipment in the whole power generation process is accurately located.Taking a gas field in southwest China as an example,the comprehensive energy consumption evaluation of the three power generation technologies is carried out,and the technology with the best energy consumption condition among the three technologies is determined.Finally,the rationalization improvement measures are put forward from improving the air tightness,replacing the deflector and reducing the flow loss.展开更多
Second harmonic generation(SHG),a fundamental and widely-studied phenomenon in nonlinear optics,has attracted significant attention for its ability to convert fundamental frequencies into their second harmonics.While ...Second harmonic generation(SHG),a fundamental and widely-studied phenomenon in nonlinear optics,has attracted significant attention for its ability to convert fundamental frequencies into their second harmonics.While the dominant SHG research has been focused on the optical and infrared regimes,its investigation in the microwave range presents challenges due to the requirements of materials with higher nonlinear coefficients and high-power microwave sources.Here,we provide an overview of methods together with underlying mechanisms for SHG in microwave frequencies,and discuss prospects and insights into the future developments of SHG-based technologies.The discussions on both numerical analyses and experimental studies will offer guidance for further SHG research and communication advancements in microwave regime.展开更多
Airport disruptions often pose challenges in assigning aircraft to gates,resulting in infeasible planned schedules.In particular,a large number of transfer passengers miss their connections in the context of disruptio...Airport disruptions often pose challenges in assigning aircraft to gates,resulting in infeasible planned schedules.In particular,a large number of transfer passengers miss their connections in the context of disruptions,which cause huge economic losses to airlines and serious passengers’dissatisfaction.This paper proposes a set-partitioning-based model to optimize Aircraft-Gate Reassignment with Transfer Passenger Connections(AGRP-TPC),which incorporates flexible gate-swap and aircraft-delay operations to mitigate the overall impact of disruptions.To efficiently solve the model,we introduce the concepts of additive-transfer and nonstop-transfer to handle passenger connections,and develop a Hierarchical Column-and-Row Generation(HCRG)approach guided by airport terminal space attribute.The column generation and row generation procedures solve iteratively until no new variables and constraints are generated.In addition,a follow-on strategy and a diving heuristic are designed to efficiently obtain high-quality solutions.We evaluate the proposed approach using various instances from a major Chinese international airport.Computational results demonstrate that our approach outperforms the comparison algorithms and produces good solutions within the time limit.Detailed results indicate that our approach effectively reduces overall losses in aircraft-gate reassignment following disruptions,and it can serve as an auxiliary decision-making tool for airport operators and airlines.展开更多
In the context of the transformation method, we propose a general approach to construct numerically the mapping generated by imposing specific boundary conditions with a targeted function, and the necessary material a...In the context of the transformation method, we propose a general approach to construct numerically the mapping generated by imposing specific boundary conditions with a targeted function, and the necessary material and heat source spatial distributions are then derived with the help of transformation method. The construction of mapping by grid generation method through solving partial differential equations circumvents the limitation of device geometry, which paves the way for designing more complex heat flow control devices. Two numerical examples are also given to show how to design material properties and heat source in order to control temperature patterns.展开更多
Electron transfer reactions between O-benzoyl t-butylhydroxyl- amine,t-BuNHOCOPh(1)and perfluorodiacyl peroxides(RfCO_2)_2(2)may serve as a novel method for generating useful t-hutyl perfluoroalkyl nitroxldes at room ...Electron transfer reactions between O-benzoyl t-butylhydroxyl- amine,t-BuNHOCOPh(1)and perfluorodiacyl peroxides(RfCO_2)_2(2)may serve as a novel method for generating useful t-hutyl perfluoroalkyl nitroxldes at room temperature in CFCl2-CF2Cl.展开更多
Tool path generated by space-filling curve always turns frequently causing trembling to machine,reducing toollife and affecting workpiece quality. Length and generation time of tool paths are both relatively long. In ...Tool path generated by space-filling curve always turns frequently causing trembling to machine,reducing toollife and affecting workpiece quality. Length and generation time of tool paths are both relatively long. In order to solve these problems,a toolpath generation method of NC milling based on space-filling curve is proposed. First,T-spline surface is regarded as the modeling surface,the grid,which is based on the limited scallop-height,can be got in the parameter space,and the influence value of grid node is determined. Second,a box is defined and planned,and the tool paths are got preliminarily,which is based on minimal spanning tree; Finally,based on an improved chamfering algorithm,the whole tool paths are got. A simulation system is developed for computer simulation,and an experiment is carried out to verify the method. The results of simulation and experiment show that the method is effective and feasible,and length and time of the tool paths are reduced.展开更多
How to automatically generate three-dimensional finite element Delaunay mesh by a peifected node connection method is introduced, where nodes are generated based on existing elements, instead of independence of node c...How to automatically generate three-dimensional finite element Delaunay mesh by a peifected node connection method is introduced, where nodes are generated based on existing elements, instead of independence of node creation and elements generation in traditional node connection method. Therefore, Ihe the difficulty about how to automatically create nodes in the traditional method is overcome.展开更多
The high harmonic generation (HHG) from the CS<sub>2</sub> molecule in intense laser fields is investigated using the extended Lewenstein method. The initial state is the highest-occupied molecular orbital...The high harmonic generation (HHG) from the CS<sub>2</sub> molecule in intense laser fields is investigated using the extended Lewenstein method. The initial state is the highest-occupied molecular orbital of the CS<sub>2</sub> molecule, which can be well described by Gaussian wave packet using GAMESS-UK package. Compared with the case of the elliptical laser, the HHG can be extended in two-color circularly polarized laser field. The time-frequency analysis and classical electron trajectory as well as the ionization yield curve are also presented to further explain the underlying mechanism. After adding a static electric field on the z-direction, the single quantum path control is realized and the supercontinuum spectra are obtained. Moreover, an isolated 110 as pulse can be obtained by superposing the harmonics from 130th to 180th order.展开更多
This study aims to address the feasibility of planned islanding operation and to investigate the effect of unplanned islanding using the master-slave islanding method for controlling the distributed generation units d...This study aims to address the feasibility of planned islanding operation and to investigate the effect of unplanned islanding using the master-slave islanding method for controlling the distributed generation units during grid-connected and islanding operation. Neplan desktop power simulation tool was used for the modelling and simulation of a realistic MV network with four different distributed generation technologies (diesel, gas, hydro and wind) along with their excitation and governor control systems, while an exponential model was used to represent the loads in the network. The dynamic and steady state behavior of the four distributed generation technologies were investigated during grid-connected operation and two transition modes to the islanding situation, planned and unplanned. The obtained results that validated through various case studies have shown that a suitable planned islanding transition could provide support to critical loads at the event of electricity utility outages.展开更多
In this study,the impacts of internal heat generation on heat transfer enhancement of porous fin is theoretical investigated using differential transform method.The parametric studies reveal that porosity enhances the...In this study,the impacts of internal heat generation on heat transfer enhancement of porous fin is theoretical investigated using differential transform method.The parametric studies reveal that porosity enhances the fin heat dissipating capacity but the internal heat generation decreases the heat enhancement capacity of extended surface.Also,it is established that when the internal heat parameter increases to some certain values,some negative effects are recorded where the fin stores heat rather than dissipating it.This scenario defeats the prime purpose of the cooling fin.Additionally,it is established in the present study that the limiting value of porosity parameter for thermal stability for the passive device increases as internal heat parameter increases.This shows that although the internal heat parameter can help assist higher range and value of thermal stability of the fin,it produces negative effect which greatly defeats the ultimate purpose of the fin.The results in the work will help in fin design for industrial applications where internal heat generation is involved.展开更多
The generation expansion planning is one of complex mixed-integer optimization problems, which involves a large number of continuous or discrete decision variables and constraints. In this paper, an interior point wit...The generation expansion planning is one of complex mixed-integer optimization problems, which involves a large number of continuous or discrete decision variables and constraints. In this paper, an interior point with cutting plane （IP/CP） method is proposed to solve the mixed-integer optimization problem of the electrical power generation expansion planning. The IP/CP method could improve the overall efficiency of the solution and reduce the computational time. Proposed method is combined with the Bender＇s decomposition technique in order to decompose the generation expansion problem into a master investment problem and a slave operational problem. The numerical example is presented to compare with the effectiveness of the proposed algorithm.展开更多
This paper describes two modified methods for triangular and quadrilateral meshing for finite element analysis of 2D electric machines. One is coupling the classic Delaunay method and advancing front method to generat...This paper describes two modified methods for triangular and quadrilateral meshing for finite element analysis of 2D electric machines. One is coupling the classic Delaunay method and advancing front method to generate optimal triangulation; the other is coupling the classic paving and Delaunay triangulation for optimal quadrilateral meshing. Various electric machine models are meshed successfully to demonstrate the robustness and effectiveness of the methods.展开更多
Peeling trunk,binding insect-attracting belt,cleaning orchard and soil-covering under the crown were the control methods on overwintering generation of oriental fruit moth.However,they had not been applied widely on t...Peeling trunk,binding insect-attracting belt,cleaning orchard and soil-covering under the crown were the control methods on overwintering generation of oriental fruit moth.However,they had not been applied widely on the production because of the lack of systematic quantitative evaluation.Aiming at this fact,the control effects of these technical measures were studied in peach with different ripening period.The results showed that peeling trunk was the best with the control effect of88.64%.The control effect of binding insect-attracting belt of grass bundle was74.13%,which was the most economical and efficient.Covering with soil layer of 3cm under the crown during the middle ten days of March could holdback the adult getting out from soil.Cleaning deadwood could clean out the overwintering larvae on the ground.展开更多
A hybrid grid generation technique and a multigrid/parallel algorithm are presented in this paper for turbulence flow simulations over three-dimensional （3D） complex geometries. The hybrid grid generation technique ...A hybrid grid generation technique and a multigrid/parallel algorithm are presented in this paper for turbulence flow simulations over three-dimensional （3D） complex geometries. The hybrid grid generation technique is based on an agglomeration method of anisotropic tetrahedrons. Firstly, the complex computational domain is covered by pure tetrahedral grids, in which anisotropic tetrahedrons are adopted to discrete the boundary layer and isotropic tetrahedrons in the outer field. Then, the anisotropic tetrahedrons in the boundary layer are agglomerated to generate prismatic grids. The agglomeration method can improve the grid quality in boundary layer and reduce the grid quantity to enhance the numerical accuracy and efficiency. In order to accelerate the convergence history, a multigrid/parallel algorithm is developed also based on anisotropic agglomeration approach. The numerical results demonstrate the excellent accelerating capability of this multigrid method.展开更多
文摘The paper aims to demonstrate the system of SANYI biogas power generation by two-step method which can produce methane and generate electricity effectively and stably.So it can be stable synchronization meshwork energy source establishment and provide references to develop an effective and stable project of producing methane and generating electricity.
基金the National Natural Science Foundation of China(Grant No.51709041).
文摘The innovative Next Generation Subsea Production System(NextGen SPS)concept is a newly proposed petroleum development solution in ultra-deep water areas.The definition of NextGen SPS involves several disciplines,which makes the design process difficult.In this paper,the definition of NextGen SPS is modeled as an uncertain multidisciplinary design optimization(MDO)problem.The deterministic optimization model is formulated,and three concerning disciplines—cost calculation,hydrodynamic analysis and global performance analysis are presented.Surrogate model technique is applied in the latter two disciplines.Collaborative optimization(CO)architecture is utilized to organize the concerning disciplines.A deterministic CO framework with two disciplinelevel optimizations is proposed firstly.Then the uncertainties of design parameters and surrogate models are incorporated by using interval method,and uncertain CO frameworks with triple loop and double loop optimization structure are established respectively.The optimization results illustrate that,although the deterministic MDO result achieves higher reduction in objective function than the uncertain MDO result,the latter is more reliable than the former.
文摘A simple and highly accurate semi-analytical method, called the differential transformation method(DTM), was used for solving the nonlinear temperature distribution equation in solid and porous longitudinal fin with temperature dependent internal heat generation. The problem was solved for two main cases. In the first case, heat generation was assumed variable by fin temperature for a solid fin and in second heat generation varied with temperature for a porous fin. Results are presented for the temperature distribution for a range of values of parameters appearing in the mathematical formulation(e.g. N, εG, and G). Results reveal that DTM is very effective and convenient. Also, it is found that this method can achieve more suitable results in comparison to numerical methods.
基金co-supported by the Zhejiang Provincial Science and Technology Program,China(No.2021C01108)the Innovative Research Foundation of Ship General Performance,China(No.14022105)the Science and Technology on Scramjet Laboratory Fund,China(No.2022-JCJQ-LB020-05).
文摘An efficient Advancing Layer Method(ALM)is presented to create semi-structured prisms on viscous walls,in which a procedure that checks possible front intersections is essential to its efficiency.This paper develops various novel schemes to improve the algorithm’s efficiency precisely while not sacrificing its robustness and the resulting mesh quality.First,it employs a set of new techniques,and data structures are developed to improve the efficiency of the frontcheck procedure.Then,within each octant,a new filter is developed to reduce the intersection computations in the searching process.In addition,data structures are well designed to store the contiguously accessed data in each computing-intensive loop in a contiguous space for a potentially better cache hit ratio.We built a geometry model library formed by examples of industrial complexity to demonstrate the practicability of the algorithm.All the efforts mentioned above enable us to reduce the percentage of computing time taken by intersection check to an acceptable level(approximately 26%),which make it no longer be the most time-consuming part.
基金supported by the fund of the State Key Laboratory of Solidification Processing in NWPU (No: SKLSP201006)the National Basic Research Program of China (No: 2011CB610402)
文摘The boundary mesh of the casting model was determined by direct calculation on the triangular facets extracted from the STL file of the 3D model. Then the inner and outer grids of the model were identified by the algorithm in which we named Inner Seed Grid Method. Finally, a program to automatically generate a 3D FDM mesh was compiled. In the paper, a method named Triangle Contraction Search Method (TCSM) was put forward to ensure not losing the boundary grids; while an algorithm to search inner seed grids to identify inner/outer grids of the casting model was also brought forward. Our algorithm was simple, clear and easy to construct program. Three examples for the casting mesh generation testified the validity of the program.
基金This project is supported by Provincial Project Foundation of Science and Technology of Guangdong, China(No.2002104040101).
文摘In order to provide a guidance to specify the element size dynamically during adaptive finite element mesh generation, adaptive criteria are firstly defined according to the relationships between the geometrical features and the elements of 3D solid. Various modes based on different datum geometrical elements, such as vertex, curve, surface, and so on, are then designed for generating local refined mesh. With the guidance of the defmed criteria, different modes are automatically selected to apply on the appropriate datum objects to program the element size in the local special areas. As a result, the control information of element size is successfully programmed covering the entire domain based on the geometrical features of 3D solid. A new algorithm based on Delatmay triangulation is then developed for generating 3D adaptive finite element mesh, in which the element size is dynamically specified to catch the geometrical features and suitable tetrahedron facets are selected to locate interior nodes continuously. As a result, adaptive mesh with good-quality elements is generated. Examples show that the proposed method can be successfully applied to adaptive finite element mesh automatic generation based on the geometrical features of 3D solid.
基金financially supported by the National Natural Science Foundation of China(52074089 and 51534004)Natural Science Foundation of Heilongjiang Province of China(LH2019E019)。
文摘Based on the“three box”exergy analysis model,a black box-gray box hierarchical exergy analysis and evaluation method is put forward in this paper,which is applied to evaluate the power generation technology of differential pressure produced by natural gas expansion.By using the exergy analysis theory,the black box-gray box hierarchical exergy analysis models of three differential pressure power generation technologies are established respectively.Firstly,the“black box”analysis models of main energy consuming equipment are established,and then the“gray box”analysis model of the total system is established.Based on the calculation results of exergy analysis indexes,the weak energy consumption equipment in the whole power generation process is accurately located.Taking a gas field in southwest China as an example,the comprehensive energy consumption evaluation of the three power generation technologies is carried out,and the technology with the best energy consumption condition among the three technologies is determined.Finally,the rationalization improvement measures are put forward from improving the air tightness,replacing the deflector and reducing the flow loss.
基金supported by the National Natural Science Foun-dation of China(No.12274339).
文摘Second harmonic generation(SHG),a fundamental and widely-studied phenomenon in nonlinear optics,has attracted significant attention for its ability to convert fundamental frequencies into their second harmonics.While the dominant SHG research has been focused on the optical and infrared regimes,its investigation in the microwave range presents challenges due to the requirements of materials with higher nonlinear coefficients and high-power microwave sources.Here,we provide an overview of methods together with underlying mechanisms for SHG in microwave frequencies,and discuss prospects and insights into the future developments of SHG-based technologies.The discussions on both numerical analyses and experimental studies will offer guidance for further SHG research and communication advancements in microwave regime.
基金supported by the National Natural Science Foundation of China(No.U2333218).
文摘Airport disruptions often pose challenges in assigning aircraft to gates,resulting in infeasible planned schedules.In particular,a large number of transfer passengers miss their connections in the context of disruptions,which cause huge economic losses to airlines and serious passengers’dissatisfaction.This paper proposes a set-partitioning-based model to optimize Aircraft-Gate Reassignment with Transfer Passenger Connections(AGRP-TPC),which incorporates flexible gate-swap and aircraft-delay operations to mitigate the overall impact of disruptions.To efficiently solve the model,we introduce the concepts of additive-transfer and nonstop-transfer to handle passenger connections,and develop a Hierarchical Column-and-Row Generation(HCRG)approach guided by airport terminal space attribute.The column generation and row generation procedures solve iteratively until no new variables and constraints are generated.In addition,a follow-on strategy and a diving heuristic are designed to efficiently obtain high-quality solutions.We evaluate the proposed approach using various instances from a major Chinese international airport.Computational results demonstrate that our approach outperforms the comparison algorithms and produces good solutions within the time limit.Detailed results indicate that our approach effectively reduces overall losses in aircraft-gate reassignment following disruptions,and it can serve as an auxiliary decision-making tool for airport operators and airlines.
基金supported by the National Natural Science Foundation of China(Nos.11372035,10832002 and 11221202)China Postdoctoral Science Foundation(No.2014M550054)
文摘In the context of the transformation method, we propose a general approach to construct numerically the mapping generated by imposing specific boundary conditions with a targeted function, and the necessary material and heat source spatial distributions are then derived with the help of transformation method. The construction of mapping by grid generation method through solving partial differential equations circumvents the limitation of device geometry, which paves the way for designing more complex heat flow control devices. Two numerical examples are also given to show how to design material properties and heat source in order to control temperature patterns.
文摘Electron transfer reactions between O-benzoyl t-butylhydroxyl- amine,t-BuNHOCOPh(1)and perfluorodiacyl peroxides(RfCO_2)_2(2)may serve as a novel method for generating useful t-hutyl perfluoroalkyl nitroxldes at room temperature in CFCl2-CF2Cl.
基金Supported by the National Natural Science Foundation of China(No.51575143)
文摘Tool path generated by space-filling curve always turns frequently causing trembling to machine,reducing toollife and affecting workpiece quality. Length and generation time of tool paths are both relatively long. In order to solve these problems,a toolpath generation method of NC milling based on space-filling curve is proposed. First,T-spline surface is regarded as the modeling surface,the grid,which is based on the limited scallop-height,can be got in the parameter space,and the influence value of grid node is determined. Second,a box is defined and planned,and the tool paths are got preliminarily,which is based on minimal spanning tree; Finally,based on an improved chamfering algorithm,the whole tool paths are got. A simulation system is developed for computer simulation,and an experiment is carried out to verify the method. The results of simulation and experiment show that the method is effective and feasible,and length and time of the tool paths are reduced.
基金This project is supported by Provincial Natural Science foundation of Guangdong!(970516)
文摘How to automatically generate three-dimensional finite element Delaunay mesh by a peifected node connection method is introduced, where nodes are generated based on existing elements, instead of independence of node creation and elements generation in traditional node connection method. Therefore, Ihe the difficulty about how to automatically create nodes in the traditional method is overcome.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11574117,11271158,61575077 and 11575071
文摘The high harmonic generation (HHG) from the CS<sub>2</sub> molecule in intense laser fields is investigated using the extended Lewenstein method. The initial state is the highest-occupied molecular orbital of the CS<sub>2</sub> molecule, which can be well described by Gaussian wave packet using GAMESS-UK package. Compared with the case of the elliptical laser, the HHG can be extended in two-color circularly polarized laser field. The time-frequency analysis and classical electron trajectory as well as the ionization yield curve are also presented to further explain the underlying mechanism. After adding a static electric field on the z-direction, the single quantum path control is realized and the supercontinuum spectra are obtained. Moreover, an isolated 110 as pulse can be obtained by superposing the harmonics from 130th to 180th order.
文摘This study aims to address the feasibility of planned islanding operation and to investigate the effect of unplanned islanding using the master-slave islanding method for controlling the distributed generation units during grid-connected and islanding operation. Neplan desktop power simulation tool was used for the modelling and simulation of a realistic MV network with four different distributed generation technologies (diesel, gas, hydro and wind) along with their excitation and governor control systems, while an exponential model was used to represent the loads in the network. The dynamic and steady state behavior of the four distributed generation technologies were investigated during grid-connected operation and two transition modes to the islanding situation, planned and unplanned. The obtained results that validated through various case studies have shown that a suitable planned islanding transition could provide support to critical loads at the event of electricity utility outages.
文摘In this study,the impacts of internal heat generation on heat transfer enhancement of porous fin is theoretical investigated using differential transform method.The parametric studies reveal that porosity enhances the fin heat dissipating capacity but the internal heat generation decreases the heat enhancement capacity of extended surface.Also,it is established that when the internal heat parameter increases to some certain values,some negative effects are recorded where the fin stores heat rather than dissipating it.This scenario defeats the prime purpose of the cooling fin.Additionally,it is established in the present study that the limiting value of porosity parameter for thermal stability for the passive device increases as internal heat parameter increases.This shows that although the internal heat parameter can help assist higher range and value of thermal stability of the fin,it produces negative effect which greatly defeats the ultimate purpose of the fin.The results in the work will help in fin design for industrial applications where internal heat generation is involved.
文摘The generation expansion planning is one of complex mixed-integer optimization problems, which involves a large number of continuous or discrete decision variables and constraints. In this paper, an interior point with cutting plane （IP/CP） method is proposed to solve the mixed-integer optimization problem of the electrical power generation expansion planning. The IP/CP method could improve the overall efficiency of the solution and reduce the computational time. Proposed method is combined with the Bender＇s decomposition technique in order to decompose the generation expansion problem into a master investment problem and a slave operational problem. The numerical example is presented to compare with the effectiveness of the proposed algorithm.
文摘This paper describes two modified methods for triangular and quadrilateral meshing for finite element analysis of 2D electric machines. One is coupling the classic Delaunay method and advancing front method to generate optimal triangulation; the other is coupling the classic paving and Delaunay triangulation for optimal quadrilateral meshing. Various electric machine models are meshed successfully to demonstrate the robustness and effectiveness of the methods.
文摘Peeling trunk,binding insect-attracting belt,cleaning orchard and soil-covering under the crown were the control methods on overwintering generation of oriental fruit moth.However,they had not been applied widely on the production because of the lack of systematic quantitative evaluation.Aiming at this fact,the control effects of these technical measures were studied in peach with different ripening period.The results showed that peeling trunk was the best with the control effect of88.64%.The control effect of binding insect-attracting belt of grass bundle was74.13%,which was the most economical and efficient.Covering with soil layer of 3cm under the crown during the middle ten days of March could holdback the adult getting out from soil.Cleaning deadwood could clean out the overwintering larvae on the ground.
基金supported partially by National Basic Research Program of China (Grant No. 2009CB723800)National Natural Science Foundation of China (Grant Nos: 91016001 and 10872023)
文摘A hybrid grid generation technique and a multigrid/parallel algorithm are presented in this paper for turbulence flow simulations over three-dimensional （3D） complex geometries. The hybrid grid generation technique is based on an agglomeration method of anisotropic tetrahedrons. Firstly, the complex computational domain is covered by pure tetrahedral grids, in which anisotropic tetrahedrons are adopted to discrete the boundary layer and isotropic tetrahedrons in the outer field. Then, the anisotropic tetrahedrons in the boundary layer are agglomerated to generate prismatic grids. The agglomeration method can improve the grid quality in boundary layer and reduce the grid quantity to enhance the numerical accuracy and efficiency. In order to accelerate the convergence history, a multigrid/parallel algorithm is developed also based on anisotropic agglomeration approach. The numerical results demonstrate the excellent accelerating capability of this multigrid method.
