During cold rolling in magnesium(Mg)alloys,there will always be serious ductility deterioration,which greatly restricts the application of this processing method.In this work,ductility-strength synergy occurred after ...During cold rolling in magnesium(Mg)alloys,there will always be serious ductility deterioration,which greatly restricts the application of this processing method.In this work,ductility-strength synergy occurred after cold rolling was carried out on a<0001>fiber textured Mg-17.5Gd-Zr alloy(wt.%).The ductility-strength synergy can be mainly attributed to texture randomization,microstructure refinement,and easier basal slip transfer condition in the twinned grains.Firstly,the activation of multiple twinning behaviors,i.e.,{10-12},{10-11},and{11-21}twinning,and related twin-twin interaction restrict the formation of strong basal texture and facilitate the texture randomization.Secondly,profuse high-angle grain boundaries form through dislocation-twin interaction,twin-twin interaction,and dislocation interaction,which promote microstructure refinement.Thirdly,the basal slip transfer becomes easier in the twinned grains owing to the activation of multiple twinning behaviors and their impingements.Activation of{11-21}twinning and<c+a>dislocations and the<0001>fiber texture which is favorable for multiple twinning activating during cold rolling are considered to be the key roles for microstructure and texture optimization.展开更多
Copper alloys with high strength and high conductivity are an important functional material with full of potential applications. In the present investigation, a bronze with higher tin content （Cu-13.5 wt pct Sn） was...Copper alloys with high strength and high conductivity are an important functional material with full of potential applications. In the present investigation, a bronze with higher tin content （Cu-13.5 wt pct Sn） was prepared successfully by spray forming, the feasibility of cold roiling this alloy was investigated, and the cold roiling characteristics of this alloy have also been discussed. The results indicate that the spray-formed Cu-13.5 wt pct Sn alloy, compared with the as-cast ingot, shows a quite fine and homogeneous single-phase structure, and, therefore shows an excellent workability. It can be cold-roiled with nearly 15% reduction in the thickness per pass and the total reduction can reach 80%. The classical border between the wrought and cast alloys is shifted to considerably higher tin contents by spray forming. After proper thermo-mechanical treatment, spray-formed Cu-13.5 wt pct Sn alloy exhibits excellent comprehensive mechanical properties. Particularly, it shows a low elastic modulus （-88 GPa） and a high flow stress （over 800 MPa） after cold forming. This combination of properties is unique in the domain of metallic materials and could open new possibilities in spring technology field.展开更多
Summary: The efficiency of cold storage red blood cells (CSRBC) or whole blood at -80 ℃ used in 27 Rh(D) negative patients during surgical operation was reported. The Rh(D) negative patients received the transfusion...Summary: The efficiency of cold storage red blood cells (CSRBC) or whole blood at -80 ℃ used in 27 Rh(D) negative patients during surgical operation was reported. The Rh(D) negative patients received the transfusion of CSRBC or whole blood stored at -80 ℃ for 180 to 360 days. The changes in the indexes, such as blood TB, DB, K +, Na +, BUN, Cr, urine protein (URPO), UOB, Hb, HCT, serum total protein, relative to hemolytic reaction and blood volume before and after transfusion were observed. The results showed that after transfusion of CSRBC or whole blood 27 cases were negative for urine protein and UOB, and the levels of BUN and Cr were normal (P>0.05). Blood TB, DB, Hb, and HCT were increased, while pH, blood K + and blood Na + was normal with the difference being not significant before and after operation (P>0.05). Plasma protein was decreased, but there was no significant difference before and after operation (P>0.05). It was suggested that CSRBC or whole blood at -80 ℃ could be safely infused to the Rh(D) negative patients without side effects during the surgical operation.展开更多
The key problems of cold power spinning of Ti-15-3 alloy are studied. Reasonable billet preparation methods are presented to improve crystal structure and avoid crack of billet. Influences of original wall thickness,...The key problems of cold power spinning of Ti-15-3 alloy are studied. Reasonable billet preparation methods are presented to improve crystal structure and avoid crack of billet. Influences of original wall thickness, reduction rate and feed rate on expanding in diameter are analyzed and some methods to prevent expanding in diameter are given.展开更多
Several media report highlight on that the pharmaceutical companies require ultra-low temperatures -80<span style="white-space:nowrap;">°</span>C to transport and store its COVID-19 vaccines...Several media report highlight on that the pharmaceutical companies require ultra-low temperatures -80<span style="white-space:nowrap;">°</span>C to transport and store its COVID-19 vaccines. This research presents the thermodynamic analysis on cascade refrigeration system (CRS) with several refrigerant pairs which are R32/R170, R123/R170, R134a/R170, R404A/R170, R407c/R170, R410/R170, and the hydrocarbon (HC) refrigerant pair Propane/Ethane, namely R290/R170. Besides, the results of R22/R170 pair, which is not recommended to be used due to phase out of R22 as per Montréal Protocol, are included as base case to compare the novel hydrocarbon pairs in CRS and the old trend of refrigerant pairs. Thermodynamic properties of all these pairs were investigated and compared under different intermediate temperature used in CRS heat exchanger, which thermally connected both the Low and High temperature cycles (LTC) and (HTC). By applying the first law of thermodynamics, the coefficients of performance (COPs) and the specific power consumptions (SPC) in kW/TR are presented and compared. In addition, by applying the second law of thermodynamics the exergetic efficiencies were estimated. The results reveal the promising opportunity of using the HC pair (R290/R170). The minimum SPC in kW/TR is recorded for the pair R123/R170. One the other hand, the highest exegetic efficiency values are observed to be 40%, 38%, and 35% for the pairs R123/R170, R290/R170, and R134/R170, respectively. This research concludes that the HC pair (R290/R170) is highly recommended for CRS applications either to transport the COVID-19 or store it in cold storage rooms in hospitals and clinics. All precautionary measures should be carefully applied in design and operation of HC pair (R290/R170) due to its flammability hazard.展开更多
In specific condition, when wrapping angle of cold rolling strip covering surface of shape detecting roll dynamically changes, online radial compression of the shape detecting roll is changed too, and it seriously aff...In specific condition, when wrapping angle of cold rolling strip covering surface of shape detecting roll dynamically changes, online radial compression of the shape detecting roll is changed too, and it seriously affects online shape detecting precision of cold strip. Based on the latest intelligent shape meter developed by Yanshan University, using PSO-BP neural network and actual working condition datum, the cold strip online dynamic wrapping angle compensation model is established, and successfully applied in 1250 mm 6-high cold mill, remarkable results are achieved. The error between calculated values and measured values of total tensions is within 3 %展开更多
Shape is an important quality index of cold rolling strip. Up to now, many problems in the shape control domain have not been solved satisfactorily, and a review on the research progress in the shape control domain ca...Shape is an important quality index of cold rolling strip. Up to now, many problems in the shape control domain have not been solved satisfactorily, and a review on the research progress in the shape control domain can help to seek new breakthrough directions. In the past 10 years, researches and applications of shape control models, shape control means, shape detection technology, and shape con- trol system have achieved significant progress. In the aspect of shape control models, the researches in the past improve the accuracy, speed and robustness of the models. The intelligentization of shape control models should be strengthened in the future. In the aspect of the shape control means, the researches in the past focus on the roll opti- mization, mill type selection, process optimization, local strip shape control, edge drop control, and so on. In the future, more attention should be paid to the coordination control of both strip shape and other quality indexes, and the refinement of control objective should be strengthened. In the aspects of shape detection technology and shape control system, some new types of shape detection meters and shape control systems are developed and have successfully indus- trial applications. In the future, the standardization of shape detection technology and shape control system should be promoted to solve the problem of compatibility. In general,the four expected development trends of shape control for cold roiling strip in the future are intelligentization, coordi- nation, refinement, and standardization. The proposed research provides new breakthrough directions for improv- ing shape quality.展开更多
Tension-tension fatigue properties of hot rolled and cold rolled strips with same contents and sizes were measured by using group test method at room temperature in air. The results showed that the fatigue properties ...Tension-tension fatigue properties of hot rolled and cold rolled strips with same contents and sizes were measured by using group test method at room temperature in air. The results showed that the fatigue properties of the hot rolled strips were obviously higher than those of the cold rolled strips. The hot rolled strips with similar or higher tensile strength exhibited superior fatigue property over the cold rolled strips. Fracture morphologies observed using scanning electronic microscope （SEM） showed that the hot rolled strips exhibited larger fracture areas, indicating a slightly lower plasticity, and more even fracture microstructure and stable properties. It is feasible and reliable to replace cold rolled strips with hot rolled strips.展开更多
The Tibetan Plateau(TP)is undergoing rapid urbanization.To improve urban sustainability and construct eco-logical security barriers,it is essential to quantify the spatial patterns of urbanization level on the TP,but ...The Tibetan Plateau(TP)is undergoing rapid urbanization.To improve urban sustainability and construct eco-logical security barriers,it is essential to quantify the spatial patterns of urbanization level on the TP,but the existing studies on the topic have been limited by the lack of socioeconomic data.This study aims to quantify the urbanization level on the TP in 2018 with Luojia1-01(LJ1-01)high-resolution nighttime light(NTL)data.Specifically,the compounded night light index is used to quantify spatial patterns of urbanization level at mul-tiple scales.The results showed that the TP had a low overall urbanization level with a large internal difference.The urbanization level in the northeast,southeast and south of the TP was relatively high,forming three hotspots centered in Xining City,Lhasa City and Shangri-La City,while the urbanization level in the central and western regions was relatively low.The analysis of influencing factors,based on the random forest model,showed that transportation and topography were the main factors affecting the TP’s spatial patterns of urbanization level.The comparison analysis with socioeconomic statistics and traditional NTL data showed that LJ1-01 NTL data can be used to more effectively quantify the urbanization level since it is more advantageous for reflecting the spatial extent of urban land and describing the spatial structure of socioeconomic activities within urban areas.These advantages are attributed to the high spatial resolution of the data,appropriate imaging time and unaf-fected by saturation phenomena.Thus,the proposed LJ1-01 NTL-based urbanization level measurement method has the potential for wide applications around the world,especially in less-developed regions lacking statistical data.Using this method,we refined the measurement of the TP’s urbanization level in 2018 for multiple scales including the region,basin,prefecture and county levels,which provides basic information for the further urban sustainability research on the TP.展开更多
Winter turnip rape(Brassica rapa L.)is widely cultivated in winter in Northwest China,however,its cold-tolerant mechanism remains insufficiently understood.In this study,winter turnip rape cultivar Longyou 7,a cold-to...Winter turnip rape(Brassica rapa L.)is widely cultivated in winter in Northwest China,however,its cold-tolerant mechanism remains insufficiently understood.In this study,winter turnip rape cultivar Longyou 7,a cold-tolerant variety,was used as material,whose accumulation of H_(2)O_(2) and O_(2)^(·-),antioxidant enzyme activity as well as differences in protein expression based on two-dimensional gel electrophoresis(2-DE)technique under -4℃ stress were analyzed.Results showed that,production of H_(2)O_(2) and O_(2)^(·-) were increased in Longyou 7 leaves,simultaneously,SOD and POD activities were also obviously rosed up,but the activities of CAT and APX were gradually reduced with the temperature.Thirty-six differential protein spots were successfully identified between control and treatments group by using mass spectrometry analysis.Among them,4 differential protein spots were induced under cold stress,and 2 were inhibited at-4℃.Functional analysis found that these identified proteins mainly participated in photosynthesis,carbohydrate metabolism,defense,protein synthesis,enzyme activity,redox and membrane metabolism,respectively.Additionally,13 proteins'function were still unknown.In conclusion,strong antioxidant capacity and cell defense ability might play important roles in Longyou 7 response to cold stress.展开更多
基金supported by the National Natural Science Foundation of China(Nos.52301164,52371121 and 52271107)the Natural Science Foundation of Shandong Province(No.ZR2021ME241)the Basic Research Project of Education Department of Liaoning Province(No.JYTQN2023066).
文摘During cold rolling in magnesium(Mg)alloys,there will always be serious ductility deterioration,which greatly restricts the application of this processing method.In this work,ductility-strength synergy occurred after cold rolling was carried out on a<0001>fiber textured Mg-17.5Gd-Zr alloy(wt.%).The ductility-strength synergy can be mainly attributed to texture randomization,microstructure refinement,and easier basal slip transfer condition in the twinned grains.Firstly,the activation of multiple twinning behaviors,i.e.,{10-12},{10-11},and{11-21}twinning,and related twin-twin interaction restrict the formation of strong basal texture and facilitate the texture randomization.Secondly,profuse high-angle grain boundaries form through dislocation-twin interaction,twin-twin interaction,and dislocation interaction,which promote microstructure refinement.Thirdly,the basal slip transfer becomes easier in the twinned grains owing to the activation of multiple twinning behaviors and their impingements.Activation of{11-21}twinning and<c+a>dislocations and the<0001>fiber texture which is favorable for multiple twinning activating during cold rolling are considered to be the key roles for microstructure and texture optimization.
基金the Hundred-Talent-Person Project of Chinese Academy of Sciences.
文摘Copper alloys with high strength and high conductivity are an important functional material with full of potential applications. In the present investigation, a bronze with higher tin content （Cu-13.5 wt pct Sn） was prepared successfully by spray forming, the feasibility of cold roiling this alloy was investigated, and the cold roiling characteristics of this alloy have also been discussed. The results indicate that the spray-formed Cu-13.5 wt pct Sn alloy, compared with the as-cast ingot, shows a quite fine and homogeneous single-phase structure, and, therefore shows an excellent workability. It can be cold-roiled with nearly 15% reduction in the thickness per pass and the total reduction can reach 80%. The classical border between the wrought and cast alloys is shifted to considerably higher tin contents by spray forming. After proper thermo-mechanical treatment, spray-formed Cu-13.5 wt pct Sn alloy exhibits excellent comprehensive mechanical properties. Particularly, it shows a low elastic modulus （-88 GPa） and a high flow stress （over 800 MPa） after cold forming. This combination of properties is unique in the domain of metallic materials and could open new possibilities in spring technology field.
文摘Summary: The efficiency of cold storage red blood cells (CSRBC) or whole blood at -80 ℃ used in 27 Rh(D) negative patients during surgical operation was reported. The Rh(D) negative patients received the transfusion of CSRBC or whole blood stored at -80 ℃ for 180 to 360 days. The changes in the indexes, such as blood TB, DB, K +, Na +, BUN, Cr, urine protein (URPO), UOB, Hb, HCT, serum total protein, relative to hemolytic reaction and blood volume before and after transfusion were observed. The results showed that after transfusion of CSRBC or whole blood 27 cases were negative for urine protein and UOB, and the levels of BUN and Cr were normal (P>0.05). Blood TB, DB, Hb, and HCT were increased, while pH, blood K + and blood Na + was normal with the difference being not significant before and after operation (P>0.05). Plasma protein was decreased, but there was no significant difference before and after operation (P>0.05). It was suggested that CSRBC or whole blood at -80 ℃ could be safely infused to the Rh(D) negative patients without side effects during the surgical operation.
文摘The key problems of cold power spinning of Ti-15-3 alloy are studied. Reasonable billet preparation methods are presented to improve crystal structure and avoid crack of billet. Influences of original wall thickness, reduction rate and feed rate on expanding in diameter are analyzed and some methods to prevent expanding in diameter are given.
文摘Several media report highlight on that the pharmaceutical companies require ultra-low temperatures -80<span style="white-space:nowrap;">°</span>C to transport and store its COVID-19 vaccines. This research presents the thermodynamic analysis on cascade refrigeration system (CRS) with several refrigerant pairs which are R32/R170, R123/R170, R134a/R170, R404A/R170, R407c/R170, R410/R170, and the hydrocarbon (HC) refrigerant pair Propane/Ethane, namely R290/R170. Besides, the results of R22/R170 pair, which is not recommended to be used due to phase out of R22 as per Montréal Protocol, are included as base case to compare the novel hydrocarbon pairs in CRS and the old trend of refrigerant pairs. Thermodynamic properties of all these pairs were investigated and compared under different intermediate temperature used in CRS heat exchanger, which thermally connected both the Low and High temperature cycles (LTC) and (HTC). By applying the first law of thermodynamics, the coefficients of performance (COPs) and the specific power consumptions (SPC) in kW/TR are presented and compared. In addition, by applying the second law of thermodynamics the exergetic efficiencies were estimated. The results reveal the promising opportunity of using the HC pair (R290/R170). The minimum SPC in kW/TR is recorded for the pair R123/R170. One the other hand, the highest exegetic efficiency values are observed to be 40%, 38%, and 35% for the pairs R123/R170, R290/R170, and R134/R170, respectively. This research concludes that the HC pair (R290/R170) is highly recommended for CRS applications either to transport the COVID-19 or store it in cold storage rooms in hospitals and clinics. All precautionary measures should be carefully applied in design and operation of HC pair (R290/R170) due to its flammability hazard.
基金Item Sponsored by National Science and Technology Support Plan of China(2007BAF02B10)Natural Science Foundation of Hebei Province of China(E2011203004)
文摘In specific condition, when wrapping angle of cold rolling strip covering surface of shape detecting roll dynamically changes, online radial compression of the shape detecting roll is changed too, and it seriously affects online shape detecting precision of cold strip. Based on the latest intelligent shape meter developed by Yanshan University, using PSO-BP neural network and actual working condition datum, the cold strip online dynamic wrapping angle compensation model is established, and successfully applied in 1250 mm 6-high cold mill, remarkable results are achieved. The error between calculated values and measured values of total tensions is within 3 %
基金Supported by National Key Technology Support Program of China (Grant No. 2011BAF15B00)Hebei Provincial Natural Science Foundation of China (Grant No. E2016203482)+1 种基金Hebei Provincial Science and Technology Research Foundation of China (Grant No. ZD2014034)Youth Independent Research Program of Yanshan University of China (Grant No. 14LGA003)
文摘Shape is an important quality index of cold rolling strip. Up to now, many problems in the shape control domain have not been solved satisfactorily, and a review on the research progress in the shape control domain can help to seek new breakthrough directions. In the past 10 years, researches and applications of shape control models, shape control means, shape detection technology, and shape con- trol system have achieved significant progress. In the aspect of shape control models, the researches in the past improve the accuracy, speed and robustness of the models. The intelligentization of shape control models should be strengthened in the future. In the aspect of the shape control means, the researches in the past focus on the roll opti- mization, mill type selection, process optimization, local strip shape control, edge drop control, and so on. In the future, more attention should be paid to the coordination control of both strip shape and other quality indexes, and the refinement of control objective should be strengthened. In the aspects of shape detection technology and shape control system, some new types of shape detection meters and shape control systems are developed and have successfully indus- trial applications. In the future, the standardization of shape detection technology and shape control system should be promoted to solve the problem of compatibility. In general,the four expected development trends of shape control for cold roiling strip in the future are intelligentization, coordi- nation, refinement, and standardization. The proposed research provides new breakthrough directions for improv- ing shape quality.
基金Item Sponsored by National Natural Science Foundation of China(51074210)
文摘Tension-tension fatigue properties of hot rolled and cold rolled strips with same contents and sizes were measured by using group test method at room temperature in air. The results showed that the fatigue properties of the hot rolled strips were obviously higher than those of the cold rolled strips. The hot rolled strips with similar or higher tensile strength exhibited superior fatigue property over the cold rolled strips. Fracture morphologies observed using scanning electronic microscope （SEM） showed that the hot rolled strips exhibited larger fracture areas, indicating a slightly lower plasticity, and more even fracture microstructure and stable properties. It is feasible and reliable to replace cold rolled strips with hot rolled strips.
基金the Second Tibetan Plateau Scientific Expedition and Research Program(Grant No.2019QZKK0405)the National Natural Science Foundation of China(Grant No.41871185&41971270)。
文摘The Tibetan Plateau(TP)is undergoing rapid urbanization.To improve urban sustainability and construct eco-logical security barriers,it is essential to quantify the spatial patterns of urbanization level on the TP,but the existing studies on the topic have been limited by the lack of socioeconomic data.This study aims to quantify the urbanization level on the TP in 2018 with Luojia1-01(LJ1-01)high-resolution nighttime light(NTL)data.Specifically,the compounded night light index is used to quantify spatial patterns of urbanization level at mul-tiple scales.The results showed that the TP had a low overall urbanization level with a large internal difference.The urbanization level in the northeast,southeast and south of the TP was relatively high,forming three hotspots centered in Xining City,Lhasa City and Shangri-La City,while the urbanization level in the central and western regions was relatively low.The analysis of influencing factors,based on the random forest model,showed that transportation and topography were the main factors affecting the TP’s spatial patterns of urbanization level.The comparison analysis with socioeconomic statistics and traditional NTL data showed that LJ1-01 NTL data can be used to more effectively quantify the urbanization level since it is more advantageous for reflecting the spatial extent of urban land and describing the spatial structure of socioeconomic activities within urban areas.These advantages are attributed to the high spatial resolution of the data,appropriate imaging time and unaf-fected by saturation phenomena.Thus,the proposed LJ1-01 NTL-based urbanization level measurement method has the potential for wide applications around the world,especially in less-developed regions lacking statistical data.Using this method,we refined the measurement of the TP’s urbanization level in 2018 for multiple scales including the region,basin,prefecture and county levels,which provides basic information for the further urban sustainability research on the TP.
基金Young Doctor Fund Project of Education Department of Gansu Province(Grant No.2021QB-113)the National Natural Science Foundation of China(Grant No.31560397 and 31660401)the China Agriculture Research System of MOF and MARA(Grant No.CARS-12).
文摘Winter turnip rape(Brassica rapa L.)is widely cultivated in winter in Northwest China,however,its cold-tolerant mechanism remains insufficiently understood.In this study,winter turnip rape cultivar Longyou 7,a cold-tolerant variety,was used as material,whose accumulation of H_(2)O_(2) and O_(2)^(·-),antioxidant enzyme activity as well as differences in protein expression based on two-dimensional gel electrophoresis(2-DE)technique under -4℃ stress were analyzed.Results showed that,production of H_(2)O_(2) and O_(2)^(·-) were increased in Longyou 7 leaves,simultaneously,SOD and POD activities were also obviously rosed up,but the activities of CAT and APX were gradually reduced with the temperature.Thirty-six differential protein spots were successfully identified between control and treatments group by using mass spectrometry analysis.Among them,4 differential protein spots were induced under cold stress,and 2 were inhibited at-4℃.Functional analysis found that these identified proteins mainly participated in photosynthesis,carbohydrate metabolism,defense,protein synthesis,enzyme activity,redox and membrane metabolism,respectively.Additionally,13 proteins'function were still unknown.In conclusion,strong antioxidant capacity and cell defense ability might play important roles in Longyou 7 response to cold stress.
