Steady speed control of agricultural machinery can improve operating quality and efficiency.To address the impact of farmland slope variations on the speed stability of unmanned operation agricultural machinery,a hybr...Steady speed control of agricultural machinery can improve operating quality and efficiency.To address the impact of farmland slope variations on the speed stability of unmanned operation agricultural machinery,a hybrid control method was proposed.This method included a hybrid controller composed of a slope-based controller and a proportional-integral-derivative(PID)controller.The speed of agricultural machinery was influenced by longitudinal forces,which were divided into two parts:one part was slope-related forces and conventional resistance,and the other was hard-to-estimate forces,such as sliding friction.For the first part,a slope-based controller was designed;for the second part,a PID controller was implemented.By combining these two controllers,the system can dynamically adjust the throttle opening and the brake master cylinder pressure,ensuring steady speed travel on sloping farmland.Simulation tests at a target speed of 7 km/h demonstrated that the proposed controller maintained a stable speed,achieving a root mean square error of 0.13 km/h and a mean absolute percentage error of 1.6%.Field tests on a practical experimental platform validated the method’s effectiveness,with results showing consistent control performance across varying slope conditions.The proposed controller demonstrated superior control performance.Experimental data verified that this method can achieve precise control of the agricultural machinery’s movement speed,meeting the stability requirements for agricultural operations.展开更多
This study investigates prescribed-time position tracking control for electromagnetic satellite formations subject to model uncertainties and external disturbances.Using the Clohessy-Wiltshire equations as the relativ...This study investigates prescribed-time position tracking control for electromagnetic satellite formations subject to model uncertainties and external disturbances.Using the Clohessy-Wiltshire equations as the relative motion dynamics model,a prescribed time output feedback control strategy is proposed.A prescribed-time extended state observer is designed to estimate the relative velocity and external disturbances.The disturbance estimates are then used as the feedforward component of the controller.Building on this framework,a novel prescribed-time active disturbance rejection control strategy for position tracking is developed via a backstepping control design.The convergence of the extended state observer and the stability of the closed-loop system are rigorously analyzed using Lyapunov stability theory.Numerical simulations are performed to validate the effectiveness of the proposed controller.展开更多
This article investigates the robust current tracking control problem of three-phase grid-connected inverters with LCL filter under external disturbance by a dynamic state feedback control method.First,this paper cons...This article investigates the robust current tracking control problem of three-phase grid-connected inverters with LCL filter under external disturbance by a dynamic state feedback control method.First,this paper constructs an internal model to learn the information of the states and input of the grid-connected inverter under steady state.Second,by utilizing the internal model principle,the paper turns the tracking control problem into the robust stabilization control problem based on some appropriate coordinate transformations.Then,The paper designs a dynamics state feedback control law to deal with this robust stabilization problem,and thus the solution of the robust current tracking control problem of three-phase grid-connected inverters can be obtained.This control method can ensure the asymptotic stability of the closedloop system.Finally,the paper illustrates the effectiveness of the proposed control approach through several groups of simulations,and compares it with the feedforward control method to verify the robustness of the proposed control method to uncertain parameters.展开更多
Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion...Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion algorithm took advantage of the fast optimization ability of PSO to optimize the population screening link of GA.The Simulink simulation results showed that the convergence of the fitness function of the fusion algorithm was accelerated,the system response adjustment time was reduced,and the overshoot was almost zero.Then the algorithm was applied to the steering test of agricultural robot in various scenes.After modeling the steering system of agricultural robot,the steering test results in the unloaded suspended state showed that the PID control based on fusion algorithm reduced the rise time,response adjustment time and overshoot of the system,and improved the response speed and stability of the system,compared with the artificial trial and error PID control and the PID control based on GA.The actual road steering test results showed that the PID control response rise time based on the fusion algorithm was the shortest,about 4.43 s.When the target pulse number was set to 100,the actual mean value in the steady-state regulation stage was about 102.9,which was the closest to the target value among the three control methods,and the overshoot was reduced at the same time.The steering test results under various scene states showed that the PID control based on the proposed fusion algorithm had good anti-interference ability,it can adapt to the changes of environment and load and improve the performance of the control system.It was effective in the steering control of agricultural robot.This method can provide a reference for the precise steering control of other robots.展开更多
Mode shift is a special mechanism for a power-split hybrid electric vehicle(HEV)to realise electrically variable transmission,but the sudden change of equivalent inertia caused by topological configuration recombinati...Mode shift is a special mechanism for a power-split hybrid electric vehicle(HEV)to realise electrically variable transmission,but the sudden change of equivalent inertia caused by topological configuration recombination during mode shift induces a significant torque shock.Therefore,a smooth transient process,among other concerns,typically associated with this category of vehicles,is of great importance.The present research aims to introduce a novel control strategy to manage the dynamic torque of multiple power sources and therefore im-prove ride comfort.To this end,a dynamic model of the objective power-split HEV is first built.To resolve the contention between vehicle jerk and clutch friction loss,a model predictive control(MPC)combined with control allocation(CA)is then designed for the clutch-engaged phase.To reduce the torque fluctuation caused by the inertia torques of multiple power sources,a dynamic compensation control strategy(DCcs)that coordinates motorgenerator torque to compensate for the transition torque is proposed for the brake-disengaged phase.Finally,the proposed control strategy is validated by simulation and bench test,and results show great potential in reducing shift duration,torque variation,vehicle jerk and friction loss(the simulation results show decreases of 22%,39%,83%and 53%,and the experimental results show decreases of 21%,74%,77%,and 59%,re-spectively),thereby improving shift quality.展开更多
In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to ...In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.展开更多
As an important resource in data link,time slots should be strategically allocated to enhance transmission efficiency and resist eavesdropping,especially considering the tremendous increase in the number of nodes and ...As an important resource in data link,time slots should be strategically allocated to enhance transmission efficiency and resist eavesdropping,especially considering the tremendous increase in the number of nodes and diverse communication needs.It is crucial to design control sequences with robust randomness and conflict-freeness to properly address differentiated access control in data link.In this paper,we propose a hierarchical access control scheme based on control sequences to achieve high utilization of time slots and differentiated access control.A theoretical bound of the hierarchical control sequence set is derived to characterize the constraints on the parameters of the sequence set.Moreover,two classes of optimal hierarchical control sequence sets satisfying the theoretical bound are constructed,both of which enable the scheme to achieve maximum utilization of time slots.Compared with the fixed time slot allocation scheme,our scheme reduces the symbol error rate by up to 9%,which indicates a significant improvement in anti-interference and eavesdropping capabilities.展开更多
The hybrid series-parallel microgrid attracts more attention by combining the advantages of both the series-stacked voltage and parallel-expanded capacity.Low-voltage distributed generations(DGs)are connected in serie...The hybrid series-parallel microgrid attracts more attention by combining the advantages of both the series-stacked voltage and parallel-expanded capacity.Low-voltage distributed generations(DGs)are connected in series to form the intra-string,and then multiple strings are interconnected in parallel.For the existing control strategies,both intra-string and inter-string depend on the centralized or distributed control with high communication reliance.It has limited scalability and redundancy under abnormal conditions.Alternatively,in this study,an intra-string distributed and inter-string decentralized control framework is proposed.Within the string,a few DGs close to the AC bus are the leaders to get the string power information and the rest DGs are the followers to acquire the synchronization information through the droop-based distributed consistency.Specifically,the output of the entire string has the active power−angular frequency(ω-P)droop characteristic,and the decentralized control among strings can be autonomously guaranteed.Moreover,the secondary control is designed to realize multi-mode objectives,including on/off-grid mode switching,grid-connected power interactive management,and off-grid voltage quality regulation.As a result,the proposed method has the ability of plug-and-play capabilities,single-point failure redundancy,and seamless mode-switching.Experimental results are provided to verify the effectiveness of the proposed practical solution.展开更多
Fluidic Thrust Vectoring(FTV)is used for the yaw attitude control of tailless flying wing,which can significantly improve stealth performance,maneuverability and lateral/heading maneuverability.The FTV control scheme ...Fluidic Thrust Vectoring(FTV)is used for the yaw attitude control of tailless flying wing,which can significantly improve stealth performance,maneuverability and lateral/heading maneuverability.The FTV control scheme of co-directional secondary flow was designed based on a 30 kgf thrust turbojet engine,an equivalent rudder deflection control variable of Mass Flow Combination(MFC)was proposed,and a control model was established to form a FTV control system scheme,which was integrated with the flight control system of a 100 kg tailless flying wing with medium aspect ratio to achieve closed-loop control of the yaw attitude based on FTV.The heading stability augmentation and maneuvering control characteristics and time response characteristics of tailless flying wing by FTV were quantitatively studied through virtual flight test in a wind tunnel at a wind speed of 35 m/s.The results show that the control strategy based on MFC achieves bidirectional continuous and stable control of thrust vector angle in a range of±11°,and the thrust vector angle varies monotonically with MFC;the co-directional FTV realizes bidirectional continuous and stable control of the yaw attitude of tailless flying wing,without longitudinal/lateral coupling moment.The increment of the maximum yawing moment coefficient is 0.0029,the maximum yaw rate is 7.55(°)/s,and the response time of the yaw rate of the vectoring nozzle actuated by the secondary flow is about 0.06 s,which satisfies the heading stability augmentation and maneuvering control response requirements of the aircraft with statically unstable heading,and provides new control means for the heading rudderless attitude control of tailless flying wing.展开更多
In this paper,we define for the trace operator,the solution of certain models of vibrating plates standards with initial data in a strategic region spaces of weak regularities.Indeed,we know that the notion of regiona...In this paper,we define for the trace operator,the solution of certain models of vibrating plates standards with initial data in a strategic region spaces of weak regularities.Indeed,we know that the notion of regional controllability is more adapted to systems described by dynamic systems.Regional controllability results in a strategic area were established for vibrating plates by the Hilbertian Uniqueness Method.展开更多
Molten salt reactors,being the only reactor type among Generation Ⅳ advanced nuclear reactors that utilize liquid fuels,offer inherent safety,high-temperature,and low-pressure operation,as well as the capability for ...Molten salt reactors,being the only reactor type among Generation Ⅳ advanced nuclear reactors that utilize liquid fuels,offer inherent safety,high-temperature,and low-pressure operation,as well as the capability for online fuel reprocessing.However,the fuel-salt flow results in the decay of delayed neutron precursors(DNPs)outside the core,causing fluctuations in the effective delayed neutron fraction and consequently impacting the reactor reactivity.Particularly in accident scenarios—such as a combined pump shutdown and the inability to rapidly scram the reactor—the sole reliance on negative temperature feedback may cause a significant increase in core temperature,posing a threat to reactor safety.To address these problems,this paper introduces an innovative design for a passive fluid-driven suspended control rod(SCR)to dynamically compensate for reactivity fluctuations caused by DNPs flowing with the fuel.The control rod operates passively by leveraging the combined effects of gravity,buoyancy,and fluid dynamic forces,thereby eliminating the need for an external drive mechanism and enabling direct integration within the active region of the core.Using a 150 MWt thorium-based molten salt reactor as the reference design,we develop a mathematical model to systematically analyze the effects of key parameters—including the geometric dimensions and density of the SCR—on its performance.We examine its motion characteristics under different core flow conditions and assess its feasibility for the dynamic compensation of reactivity changes caused by fuel flow.The results of this study demonstrate that the SCR can effectively counteract reactivity fluctuations induced by fuel flow within molten salt reactors.A sensitivity analysis reveals that the SCR’s average density exerts a profound impact on its start-up flow threshold,channel flow rate,resistance to fuel density fluctuations,and response characteristics.This underscores the critical need to optimize this parameter.Moreover,by judiciously selecting the SCR’s length,number of deployed units,and the placement we can achieve the necessary reactivity control while maintaining a favorable balance between neutron economy and heat transfer performance.Ultimately,this paper provides an innovative solution for the passive reactivity control in molten salt reactors,offering significant potential for practical engineering applications.展开更多
Electrically controlled solid propellant(ECSP)offers multiple ignition and adjustable burning rate,serving as fuel for next-generation intelligent propulsion systems.To further enhance the combustion performance of EC...Electrically controlled solid propellant(ECSP)offers multiple ignition and adjustable burning rate,serving as fuel for next-generation intelligent propulsion systems.To further enhance the combustion performance of ECSP,a method utilizing electrochemical and thermal decomposition catalysts has been proposed.In this work,we investigated the combustion characteristics of hydroxylamine nitrate(HAN)-based ECSP incorporating cerium oxide(CeO_(2))and graphene oxide(GO)by using an electrically controlled combustion test system.Electrochemical impedance spectroscopy(EIS)and linear sweep voltammetry(LSV)were used to measure the electrical conductibility and overpotential of ECSP with various additives,and Tafel curves were calculated.Thermogravimetric analysis coupled with differential scanning calorimetry(TG-DSC)was employed to investigate the thermal decomposition behavior of ECSP.While the addition of CeO_(2) and GO reduced the conductivity of ECSP,both catalysts exhibited strong electrocatalytic properties and facilitated the thermal decomposition of ECSP.Between two catalysts,GO demonstrated superior electrochemical catalytic performance but weaker thermal decomposition catalytic ability than CeO_(2).The addition of catalysts significantly enhanced the combustion performance of HAN-based ECSP.Specifically,the ignition delay time was shortened by 10%~20%.CeO_(2) raised the burning rate by approximately 20%but GO exhibited a remarkable boost of 40%in burning rate at high voltage.The combination of GO and PVA produced a flame-retardant substance that negatively impacted the ignition delay of ECSP and resulted in a smaller increase in the burning rate of ECSP at low ignition voltages.展开更多
Realistic faults and failures often occur probabilistically in the lane-keeping system of autonomous electric vehicles,reducing system reliability and posing significant challenges to driving safety.To enhance the sys...Realistic faults and failures often occur probabilistically in the lane-keeping system of autonomous electric vehicles,reducing system reliability and posing significant challenges to driving safety.To enhance the system resilience,this paper proposes a novel robust fuzzy fault-tolerant control strategy that incorporates the adaptive event-trigger(AET)mechanism to realize stable,reliable,and precise lane-keeping control in the presence of multiple system uncertainties and probabilistic faults.First,to capture the uncertain and time-varying nature of tire cornering stiffness,an effective Takagi-Sugeno(T-S)fuzzy tire model is developed.Then,by employing the distribution-based probabilistic approach,two sets of unrelated random variables,random sensor and actuator faults in the control system,are modeled.Next,to improve communication efficiency and address ineluctable network-induced delays,an AET control framework with a well-designed triggering condition is established.Subsequently,a robust fuzzy output feedback fault-tolerant lane-keeping controller that satisfies the H∞per-formance is designed by using the Lyapunov-Krasovski functional method.Furthermore,the mean-square ex-ponential stability of the closed-loop system is rigorously guaranteed.Finally,real-time simulations based on Carsim/Simulink co-simulation platform under dynamic driving conditions demonstrate the feasibility and ef-fectiveness of the proposed control strategy.展开更多
The increasing interconnection of modern industrial control systems(ICSs)with the Internet has enhanced operational efficiency,but alsomade these systemsmore vulnerable to cyberattacks.This heightened exposure has dri...The increasing interconnection of modern industrial control systems(ICSs)with the Internet has enhanced operational efficiency,but alsomade these systemsmore vulnerable to cyberattacks.This heightened exposure has driven a growing need for robust ICS security measures.Among the key defences,intrusion detection technology is critical in identifying threats to ICS networks.This paper provides an overview of the distinctive characteristics of ICS network security,highlighting standard attack methods.It then examines various intrusion detection methods,including those based on misuse detection,anomaly detection,machine learning,and specialised requirements.This paper concludes by exploring future directions for developing intrusion detection systems to advance research and ensure the continued security and reliability of ICS operations.展开更多
Modern power systems increasingly depend on interconnected microgrids to enhance reliability and renewable energy utilization.However,the high penetration of intermittent renewable sources often causes frequency devia...Modern power systems increasingly depend on interconnected microgrids to enhance reliability and renewable energy utilization.However,the high penetration of intermittent renewable sources often causes frequency deviations,voltage fluctuations,and poor reactive power coordination,posing serious challenges to grid stability.Conventional Interconnection FlowControllers(IFCs)primarily regulate active power flowand fail to effectively handle dynamic frequency variations or reactive power sharing in multi-microgrid networks.To overcome these limitations,this study proposes an enhanced Interconnection Flow Controller(e-IFC)that integrates frequency response balancing and an Interconnection Reactive Power Flow Controller(IRFC)within a unified adaptive control structure.The proposed e-IFC is implemented and analyzed in DIgSILENT PowerFactory to evaluate its performance under various grid disturbances,including frequency drops,load changes,and reactive power fluctuations.Simulation results reveal that the e-IFC achieves 27.4% higher active power sharing accuracy,19.6% lower reactive power deviation,and 18.2% improved frequency stability compared to the conventional IFC.The adaptive controller ensures seamless transitions between grid-connected and islanded modes and maintains stable operation even under communication delays and data noise.Overall,the proposed e-IFCsignificantly enhances active-reactive power coordination and dynamic stability in renewable-integrated multi-microgrid systems.Future research will focus on coupling the e-IFC with tertiary-level optimization frameworks and conducting hardware-in-the-loop validation to enable its application in large-scale smart microgrid environments.展开更多
Synchronous reluctance motors(SynRM)are widely employed in industrial applications due to their high robustness,low cost,and absence of permanent magnets.In recent years,significant research efforts have focused on im...Synchronous reluctance motors(SynRM)are widely employed in industrial applications due to their high robustness,low cost,and absence of permanent magnets.In recent years,significant research efforts have focused on improving the controllability and efficiency of SynRM.Accurate rotor position information is essential for the controller to generate appropriate current and voltage references corresponding to the desired speed and load torque.Shaft-mounted position sensors are generally undesirable because of their high cost,sensitivity to harsh operating conditions,maintenance requirements,and reduced reliability in environments characterized by high vibration.Consequently,sensorless control techniques that estimate rotor position using measured stator currents and voltages have attracted increasing attention.However,magnetic saturation,parameter nonlinearities,and cross-coupling effects significantly degrade position estimation accuracy and may compromise the stability of sensorless SynRM drives.In this paper,a nonlinear SynRM model is developed using finite element analysis(FEA)to accurately capture magnetic saturation and cross-coupling effects,thereby providing a precise representation of the machine’s electromagnetic behavior under varying load and flux conditions.A series of magnetostatic FEA simulations is performed.To reduce computational complexity,only one motor pole is analyzed by applying anti-periodic boundary conditions along the domain sides and enforcing a zero magnetic vector potential on the external stator boundary.Nonlinear iron material properties are modeled using the appropriate B-H curve.The simulations are carried out by imposing d-and q-axis current components and computing the corresponding flux linkages and electromagnetic torque.Based on these results,both apparent and incremental inductances are extracted and incorporated into the control algorithm.An advanced fictitious flux linkage method combined with a phase-locked loop(PLL)is employed for accurate rotor position estimation.Simulation results confirm that the proposed sensorless control strategy ensures stable operation and high position estimation accuracy over the entire speed range.展开更多
Formation control of multiple spacecraft has attracted extensive research attention.However,achieving reliable performance under sensor failures remains a significant challenge.This paper develops an integrated framew...Formation control of multiple spacecraft has attracted extensive research attention.However,achieving reliable performance under sensor failures remains a significant challenge.This paper develops an integrated framework that jointly designs distributed observers and local controllers to ensure robust formation control in the presence of external disturbances and sensor malfunctions.Treating the spacecraft formation as a single interconnected system,each spacecraft constructs a distributed observer that estimates the overall system state by incorporating both its own measurements and the predicted control information shared among the spacecraft.Based on the observer estimates,a local control law is synthesized to maintain the desired formation.Rigorous theoretical analysis and numerical simulations demonstrate that the proposed integrated approach effectively guarantees formation stability and resilience against sensor failures and disturbances.展开更多
When the vehicle is on a split-μramp and is restricted by the differential's torque-equalizing characteristic,a sig-nificant functional conflict may occur between the driving force limitation requirement of the a...When the vehicle is on a split-μramp and is restricted by the differential's torque-equalizing characteristic,a sig-nificant functional conflict may occur between the driving force limitation requirement of the acceleration slip regulation(ASR)control strategy for low-adhesion side wheels and the driving force enhancement demand of the entire vehicle during hill starting.Aiming at this problem,this paper proposes an ASR control strategy for the start-up of the electric vehicle on the split-μramp based on the combined control architecture of the service brake system and the parking brake system.First,the relationship between the driving force,braking force,and road adhesion at the slip moment is analyzed,and the ground adhesion estimation algorithm based on the dynamic equation of the driving wheel slip moment is proposed.Second,a service braking torque control model is constructed,and an ASR controller method based on the super-twisting sliding mode control(STSMC)algorithm is proposed to study the hill start assist(HSA)control strategy of electric vehicles on split-μroads.Finally,the proposed control strategy is si-mulated in this paper.The simulation results show that the proposed strategy can accurately estimate the ground adhesion of the driving wheel on the low-adhesion side effectively preventing the vehicle from slipping back,and improving the dynamic performance of the vehicle under harsh conditions.展开更多
CdS photocatalysts have broad application prospects in environmental purification,energy conversion,and organic synthesis.However,their practical use is often hindered by the rapid recombination of photo-generated ele...CdS photocatalysts have broad application prospects in environmental purification,energy conversion,and organic synthesis.However,their practical use is often hindered by the rapid recombination of photo-generated electron-hole pairs,which limits their efficiency on various reactions.Controlling morphological structures and crystal facets engineering are effective methods to enhance the photocatalytic performance of CdS.In this work,two different forms of CdS photocatalysts were synthesized by a hydrothermal method,namely nanoflower-shaped (CdS-NF) and nanorod-shaped (CdS-NR) for hydrogen peroxide (H_(2)O_(2)) production.The exposed crystal planes of CdS-NF are mainly (0 0 2) planes,while the accesible crystal planes of CdS-NR are notablly (1 0 1) planes.Notably,the photocatalytic hydrogen peroxide production yield of CdS-NR was high at 1225.13 μmol·h^(−1)·g^(−1),which is 1.78 times higher than the H_(2)O_(2) generation rate of CdS-NF.Moreover,through free radical capture experiments and DFT calculations,the reaction pathway was further explored.Both different configurations of cadmium sulfide based photocatalysts conform to the reaction mechanism of oxygen reduction as the main and water oxidation as the auxiliary.展开更多
Conventional multilevel inverters often suffer from high harmonic distortion and increased design complexity due to the need for numerous power semiconductor components,particularly at elevated voltage levels.Addressi...Conventional multilevel inverters often suffer from high harmonic distortion and increased design complexity due to the need for numerous power semiconductor components,particularly at elevated voltage levels.Addressing these shortcomings,thiswork presents a robust 15-level PackedUCell(PUC)inverter topology designed for renewable energy and grid-connected applications.The proposed systemintegrates a sensor less proportional-resonant(PR)controller with an advanced carrier-based pulse width modulation scheme.This approach efficiently balances capacitor voltage,minimizes steady-state error,and strongly suppresses both zero and third-order harmonics resulting in reduced total harmonic distortion and enhanced voltage regulation.Additionally,a novel switching algorithm simplifies the design and implementation,further lowering voltage stress across switches.Extensive simulation results validate the performance under various resistive and resistive-inductive load conditions,demonstrating compliance with IEEE-519 THD standards and robust operation under dynamic changes.The proposed sensorless PR-controlled 15-PUC inverter thus offers a compelling,cost-effective solution for efficient power conversion in next-generation renewable energy systems.展开更多
文摘Steady speed control of agricultural machinery can improve operating quality and efficiency.To address the impact of farmland slope variations on the speed stability of unmanned operation agricultural machinery,a hybrid control method was proposed.This method included a hybrid controller composed of a slope-based controller and a proportional-integral-derivative(PID)controller.The speed of agricultural machinery was influenced by longitudinal forces,which were divided into two parts:one part was slope-related forces and conventional resistance,and the other was hard-to-estimate forces,such as sliding friction.For the first part,a slope-based controller was designed;for the second part,a PID controller was implemented.By combining these two controllers,the system can dynamically adjust the throttle opening and the brake master cylinder pressure,ensuring steady speed travel on sloping farmland.Simulation tests at a target speed of 7 km/h demonstrated that the proposed controller maintained a stable speed,achieving a root mean square error of 0.13 km/h and a mean absolute percentage error of 1.6%.Field tests on a practical experimental platform validated the method’s effectiveness,with results showing consistent control performance across varying slope conditions.The proposed controller demonstrated superior control performance.Experimental data verified that this method can achieve precise control of the agricultural machinery’s movement speed,meeting the stability requirements for agricultural operations.
文摘This study investigates prescribed-time position tracking control for electromagnetic satellite formations subject to model uncertainties and external disturbances.Using the Clohessy-Wiltshire equations as the relative motion dynamics model,a prescribed time output feedback control strategy is proposed.A prescribed-time extended state observer is designed to estimate the relative velocity and external disturbances.The disturbance estimates are then used as the feedforward component of the controller.Building on this framework,a novel prescribed-time active disturbance rejection control strategy for position tracking is developed via a backstepping control design.The convergence of the extended state observer and the stability of the closed-loop system are rigorously analyzed using Lyapunov stability theory.Numerical simulations are performed to validate the effectiveness of the proposed controller.
基金Supported by the Fundamental Research Funds for the Central Universities(2024ZYGXZR047)the National Natural Science Foundation of China(62373156)the Guangdong Basic and Applied Basic Research Foundation(2024A1515011736)。
文摘This article investigates the robust current tracking control problem of three-phase grid-connected inverters with LCL filter under external disturbance by a dynamic state feedback control method.First,this paper constructs an internal model to learn the information of the states and input of the grid-connected inverter under steady state.Second,by utilizing the internal model principle,the paper turns the tracking control problem into the robust stabilization control problem based on some appropriate coordinate transformations.Then,The paper designs a dynamics state feedback control law to deal with this robust stabilization problem,and thus the solution of the robust current tracking control problem of three-phase grid-connected inverters can be obtained.This control method can ensure the asymptotic stability of the closedloop system.Finally,the paper illustrates the effectiveness of the proposed control approach through several groups of simulations,and compares it with the feedforward control method to verify the robustness of the proposed control method to uncertain parameters.
文摘Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion algorithm took advantage of the fast optimization ability of PSO to optimize the population screening link of GA.The Simulink simulation results showed that the convergence of the fitness function of the fusion algorithm was accelerated,the system response adjustment time was reduced,and the overshoot was almost zero.Then the algorithm was applied to the steering test of agricultural robot in various scenes.After modeling the steering system of agricultural robot,the steering test results in the unloaded suspended state showed that the PID control based on fusion algorithm reduced the rise time,response adjustment time and overshoot of the system,and improved the response speed and stability of the system,compared with the artificial trial and error PID control and the PID control based on GA.The actual road steering test results showed that the PID control response rise time based on the fusion algorithm was the shortest,about 4.43 s.When the target pulse number was set to 100,the actual mean value in the steady-state regulation stage was about 102.9,which was the closest to the target value among the three control methods,and the overshoot was reduced at the same time.The steering test results under various scene states showed that the PID control based on the proposed fusion algorithm had good anti-interference ability,it can adapt to the changes of environment and load and improve the performance of the control system.It was effective in the steering control of agricultural robot.This method can provide a reference for the precise steering control of other robots.
基金Supported by National Natural Science Foundation of China(Grant Nos.52005039,51575043,51975048,U1764257).
文摘Mode shift is a special mechanism for a power-split hybrid electric vehicle(HEV)to realise electrically variable transmission,but the sudden change of equivalent inertia caused by topological configuration recombination during mode shift induces a significant torque shock.Therefore,a smooth transient process,among other concerns,typically associated with this category of vehicles,is of great importance.The present research aims to introduce a novel control strategy to manage the dynamic torque of multiple power sources and therefore im-prove ride comfort.To this end,a dynamic model of the objective power-split HEV is first built.To resolve the contention between vehicle jerk and clutch friction loss,a model predictive control(MPC)combined with control allocation(CA)is then designed for the clutch-engaged phase.To reduce the torque fluctuation caused by the inertia torques of multiple power sources,a dynamic compensation control strategy(DCcs)that coordinates motorgenerator torque to compensate for the transition torque is proposed for the brake-disengaged phase.Finally,the proposed control strategy is validated by simulation and bench test,and results show great potential in reducing shift duration,torque variation,vehicle jerk and friction loss(the simulation results show decreases of 22%,39%,83%and 53%,and the experimental results show decreases of 21%,74%,77%,and 59%,re-spectively),thereby improving shift quality.
基金Supported in part by Natural Science Foundation of Guangxi(2023GXNSFAA026246)in part by the Central Government's Guide to Local Science and Technology Development Fund(GuikeZY23055044)in part by the National Natural Science Foundation of China(62363003)。
文摘In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.
基金supported by the National Science Foundation of China(No.62171387)the Science and Technology Program of Sichuan Province(No.2024NSFSC0468)the China Postdoctoral Science Foundation(No.2019M663475).
文摘As an important resource in data link,time slots should be strategically allocated to enhance transmission efficiency and resist eavesdropping,especially considering the tremendous increase in the number of nodes and diverse communication needs.It is crucial to design control sequences with robust randomness and conflict-freeness to properly address differentiated access control in data link.In this paper,we propose a hierarchical access control scheme based on control sequences to achieve high utilization of time slots and differentiated access control.A theoretical bound of the hierarchical control sequence set is derived to characterize the constraints on the parameters of the sequence set.Moreover,two classes of optimal hierarchical control sequence sets satisfying the theoretical bound are constructed,both of which enable the scheme to achieve maximum utilization of time slots.Compared with the fixed time slot allocation scheme,our scheme reduces the symbol error rate by up to 9%,which indicates a significant improvement in anti-interference and eavesdropping capabilities.
基金supported by the Smart Grid-National Science and Technology Major Project(2025ZD0804500)the National Natural Science Foundation of China under Grant 52307232the Hunan Provincial Natural Science Foundation of China under Grant 2024JJ4055.
文摘The hybrid series-parallel microgrid attracts more attention by combining the advantages of both the series-stacked voltage and parallel-expanded capacity.Low-voltage distributed generations(DGs)are connected in series to form the intra-string,and then multiple strings are interconnected in parallel.For the existing control strategies,both intra-string and inter-string depend on the centralized or distributed control with high communication reliance.It has limited scalability and redundancy under abnormal conditions.Alternatively,in this study,an intra-string distributed and inter-string decentralized control framework is proposed.Within the string,a few DGs close to the AC bus are the leaders to get the string power information and the rest DGs are the followers to acquire the synchronization information through the droop-based distributed consistency.Specifically,the output of the entire string has the active power−angular frequency(ω-P)droop characteristic,and the decentralized control among strings can be autonomously guaranteed.Moreover,the secondary control is designed to realize multi-mode objectives,including on/off-grid mode switching,grid-connected power interactive management,and off-grid voltage quality regulation.As a result,the proposed method has the ability of plug-and-play capabilities,single-point failure redundancy,and seamless mode-switching.Experimental results are provided to verify the effectiveness of the proposed practical solution.
文摘Fluidic Thrust Vectoring(FTV)is used for the yaw attitude control of tailless flying wing,which can significantly improve stealth performance,maneuverability and lateral/heading maneuverability.The FTV control scheme of co-directional secondary flow was designed based on a 30 kgf thrust turbojet engine,an equivalent rudder deflection control variable of Mass Flow Combination(MFC)was proposed,and a control model was established to form a FTV control system scheme,which was integrated with the flight control system of a 100 kg tailless flying wing with medium aspect ratio to achieve closed-loop control of the yaw attitude based on FTV.The heading stability augmentation and maneuvering control characteristics and time response characteristics of tailless flying wing by FTV were quantitatively studied through virtual flight test in a wind tunnel at a wind speed of 35 m/s.The results show that the control strategy based on MFC achieves bidirectional continuous and stable control of thrust vector angle in a range of±11°,and the thrust vector angle varies monotonically with MFC;the co-directional FTV realizes bidirectional continuous and stable control of the yaw attitude of tailless flying wing,without longitudinal/lateral coupling moment.The increment of the maximum yawing moment coefficient is 0.0029,the maximum yaw rate is 7.55(°)/s,and the response time of the yaw rate of the vectoring nozzle actuated by the secondary flow is about 0.06 s,which satisfies the heading stability augmentation and maneuvering control response requirements of the aircraft with statically unstable heading,and provides new control means for the heading rudderless attitude control of tailless flying wing.
文摘In this paper,we define for the trace operator,the solution of certain models of vibrating plates standards with initial data in a strategic region spaces of weak regularities.Indeed,we know that the notion of regional controllability is more adapted to systems described by dynamic systems.Regional controllability results in a strategic area were established for vibrating plates by the Hilbertian Uniqueness Method.
基金supported by Youth Innovation Promotion Association of Chinese Academy of Sciences(No.2020261)Strategic Priority Research Program of Chinese Academy of Sciences(No.XDA02010000)the Young Potential Program of Shanghai Institute of Applied Physics,Chinese Academy of Sciences(No.SINAP-YXJH-202412).
文摘Molten salt reactors,being the only reactor type among Generation Ⅳ advanced nuclear reactors that utilize liquid fuels,offer inherent safety,high-temperature,and low-pressure operation,as well as the capability for online fuel reprocessing.However,the fuel-salt flow results in the decay of delayed neutron precursors(DNPs)outside the core,causing fluctuations in the effective delayed neutron fraction and consequently impacting the reactor reactivity.Particularly in accident scenarios—such as a combined pump shutdown and the inability to rapidly scram the reactor—the sole reliance on negative temperature feedback may cause a significant increase in core temperature,posing a threat to reactor safety.To address these problems,this paper introduces an innovative design for a passive fluid-driven suspended control rod(SCR)to dynamically compensate for reactivity fluctuations caused by DNPs flowing with the fuel.The control rod operates passively by leveraging the combined effects of gravity,buoyancy,and fluid dynamic forces,thereby eliminating the need for an external drive mechanism and enabling direct integration within the active region of the core.Using a 150 MWt thorium-based molten salt reactor as the reference design,we develop a mathematical model to systematically analyze the effects of key parameters—including the geometric dimensions and density of the SCR—on its performance.We examine its motion characteristics under different core flow conditions and assess its feasibility for the dynamic compensation of reactivity changes caused by fuel flow.The results of this study demonstrate that the SCR can effectively counteract reactivity fluctuations induced by fuel flow within molten salt reactors.A sensitivity analysis reveals that the SCR’s average density exerts a profound impact on its start-up flow threshold,channel flow rate,resistance to fuel density fluctuations,and response characteristics.This underscores the critical need to optimize this parameter.Moreover,by judiciously selecting the SCR’s length,number of deployed units,and the placement we can achieve the necessary reactivity control while maintaining a favorable balance between neutron economy and heat transfer performance.Ultimately,this paper provides an innovative solution for the passive reactivity control in molten salt reactors,offering significant potential for practical engineering applications.
基金supported by the National Natural Science Foundation of China(Grant No.12074187).
文摘Electrically controlled solid propellant(ECSP)offers multiple ignition and adjustable burning rate,serving as fuel for next-generation intelligent propulsion systems.To further enhance the combustion performance of ECSP,a method utilizing electrochemical and thermal decomposition catalysts has been proposed.In this work,we investigated the combustion characteristics of hydroxylamine nitrate(HAN)-based ECSP incorporating cerium oxide(CeO_(2))and graphene oxide(GO)by using an electrically controlled combustion test system.Electrochemical impedance spectroscopy(EIS)and linear sweep voltammetry(LSV)were used to measure the electrical conductibility and overpotential of ECSP with various additives,and Tafel curves were calculated.Thermogravimetric analysis coupled with differential scanning calorimetry(TG-DSC)was employed to investigate the thermal decomposition behavior of ECSP.While the addition of CeO_(2) and GO reduced the conductivity of ECSP,both catalysts exhibited strong electrocatalytic properties and facilitated the thermal decomposition of ECSP.Between two catalysts,GO demonstrated superior electrochemical catalytic performance but weaker thermal decomposition catalytic ability than CeO_(2).The addition of catalysts significantly enhanced the combustion performance of HAN-based ECSP.Specifically,the ignition delay time was shortened by 10%~20%.CeO_(2) raised the burning rate by approximately 20%but GO exhibited a remarkable boost of 40%in burning rate at high voltage.The combination of GO and PVA produced a flame-retardant substance that negatively impacted the ignition delay of ECSP and resulted in a smaller increase in the burning rate of ECSP at low ignition voltages.
基金Supported by National Natural Science Foundation of China(Grant Nos.52025121,52394263)National Key R&D Plan of China(Grant No.2023YFD2000301)+2 种基金Foundation of State Key Laboratory of Automobile Safety and Energy Saving of China(Grant No.KFZ2201)Jiangsu Provincial Scientific Research Center of Applied Mathematics(Grant No.BK20233002)Special Fund of Jiangsu Province for the Transformation of Scientific and Technological Achievements(Grant No.BA2021023).
文摘Realistic faults and failures often occur probabilistically in the lane-keeping system of autonomous electric vehicles,reducing system reliability and posing significant challenges to driving safety.To enhance the system resilience,this paper proposes a novel robust fuzzy fault-tolerant control strategy that incorporates the adaptive event-trigger(AET)mechanism to realize stable,reliable,and precise lane-keeping control in the presence of multiple system uncertainties and probabilistic faults.First,to capture the uncertain and time-varying nature of tire cornering stiffness,an effective Takagi-Sugeno(T-S)fuzzy tire model is developed.Then,by employing the distribution-based probabilistic approach,two sets of unrelated random variables,random sensor and actuator faults in the control system,are modeled.Next,to improve communication efficiency and address ineluctable network-induced delays,an AET control framework with a well-designed triggering condition is established.Subsequently,a robust fuzzy output feedback fault-tolerant lane-keeping controller that satisfies the H∞per-formance is designed by using the Lyapunov-Krasovski functional method.Furthermore,the mean-square ex-ponential stability of the closed-loop system is rigorously guaranteed.Finally,real-time simulations based on Carsim/Simulink co-simulation platform under dynamic driving conditions demonstrate the feasibility and ef-fectiveness of the proposed control strategy.
文摘The increasing interconnection of modern industrial control systems(ICSs)with the Internet has enhanced operational efficiency,but alsomade these systemsmore vulnerable to cyberattacks.This heightened exposure has driven a growing need for robust ICS security measures.Among the key defences,intrusion detection technology is critical in identifying threats to ICS networks.This paper provides an overview of the distinctive characteristics of ICS network security,highlighting standard attack methods.It then examines various intrusion detection methods,including those based on misuse detection,anomaly detection,machine learning,and specialised requirements.This paper concludes by exploring future directions for developing intrusion detection systems to advance research and ensure the continued security and reliability of ICS operations.
基金the Deanship of Scientific Research at Northern Border University,Arar,Saudi Arabia,for funding this research work through the project number“NBU-FFR-2025-3623-11”.
文摘Modern power systems increasingly depend on interconnected microgrids to enhance reliability and renewable energy utilization.However,the high penetration of intermittent renewable sources often causes frequency deviations,voltage fluctuations,and poor reactive power coordination,posing serious challenges to grid stability.Conventional Interconnection FlowControllers(IFCs)primarily regulate active power flowand fail to effectively handle dynamic frequency variations or reactive power sharing in multi-microgrid networks.To overcome these limitations,this study proposes an enhanced Interconnection Flow Controller(e-IFC)that integrates frequency response balancing and an Interconnection Reactive Power Flow Controller(IRFC)within a unified adaptive control structure.The proposed e-IFC is implemented and analyzed in DIgSILENT PowerFactory to evaluate its performance under various grid disturbances,including frequency drops,load changes,and reactive power fluctuations.Simulation results reveal that the e-IFC achieves 27.4% higher active power sharing accuracy,19.6% lower reactive power deviation,and 18.2% improved frequency stability compared to the conventional IFC.The adaptive controller ensures seamless transitions between grid-connected and islanded modes and maintains stable operation even under communication delays and data noise.Overall,the proposed e-IFCsignificantly enhances active-reactive power coordination and dynamic stability in renewable-integrated multi-microgrid systems.Future research will focus on coupling the e-IFC with tertiary-level optimization frameworks and conducting hardware-in-the-loop validation to enable its application in large-scale smart microgrid environments.
文摘Synchronous reluctance motors(SynRM)are widely employed in industrial applications due to their high robustness,low cost,and absence of permanent magnets.In recent years,significant research efforts have focused on improving the controllability and efficiency of SynRM.Accurate rotor position information is essential for the controller to generate appropriate current and voltage references corresponding to the desired speed and load torque.Shaft-mounted position sensors are generally undesirable because of their high cost,sensitivity to harsh operating conditions,maintenance requirements,and reduced reliability in environments characterized by high vibration.Consequently,sensorless control techniques that estimate rotor position using measured stator currents and voltages have attracted increasing attention.However,magnetic saturation,parameter nonlinearities,and cross-coupling effects significantly degrade position estimation accuracy and may compromise the stability of sensorless SynRM drives.In this paper,a nonlinear SynRM model is developed using finite element analysis(FEA)to accurately capture magnetic saturation and cross-coupling effects,thereby providing a precise representation of the machine’s electromagnetic behavior under varying load and flux conditions.A series of magnetostatic FEA simulations is performed.To reduce computational complexity,only one motor pole is analyzed by applying anti-periodic boundary conditions along the domain sides and enforcing a zero magnetic vector potential on the external stator boundary.Nonlinear iron material properties are modeled using the appropriate B-H curve.The simulations are carried out by imposing d-and q-axis current components and computing the corresponding flux linkages and electromagnetic torque.Based on these results,both apparent and incremental inductances are extracted and incorporated into the control algorithm.An advanced fictitious flux linkage method combined with a phase-locked loop(PLL)is employed for accurate rotor position estimation.Simulation results confirm that the proposed sensorless control strategy ensures stable operation and high position estimation accuracy over the entire speed range.
基金supported by the National Natural Science Foundation of China(62088101,62522307,62273045,U2341213)Beijing Nova Program(20230484481)。
文摘Formation control of multiple spacecraft has attracted extensive research attention.However,achieving reliable performance under sensor failures remains a significant challenge.This paper develops an integrated framework that jointly designs distributed observers and local controllers to ensure robust formation control in the presence of external disturbances and sensor malfunctions.Treating the spacecraft formation as a single interconnected system,each spacecraft constructs a distributed observer that estimates the overall system state by incorporating both its own measurements and the predicted control information shared among the spacecraft.Based on the observer estimates,a local control law is synthesized to maintain the desired formation.Rigorous theoretical analysis and numerical simulations demonstrate that the proposed integrated approach effectively guarantees formation stability and resilience against sensor failures and disturbances.
基金Supported by the National Natural Science Foundation of China(Grant No.52172369).
文摘When the vehicle is on a split-μramp and is restricted by the differential's torque-equalizing characteristic,a sig-nificant functional conflict may occur between the driving force limitation requirement of the acceleration slip regulation(ASR)control strategy for low-adhesion side wheels and the driving force enhancement demand of the entire vehicle during hill starting.Aiming at this problem,this paper proposes an ASR control strategy for the start-up of the electric vehicle on the split-μramp based on the combined control architecture of the service brake system and the parking brake system.First,the relationship between the driving force,braking force,and road adhesion at the slip moment is analyzed,and the ground adhesion estimation algorithm based on the dynamic equation of the driving wheel slip moment is proposed.Second,a service braking torque control model is constructed,and an ASR controller method based on the super-twisting sliding mode control(STSMC)algorithm is proposed to study the hill start assist(HSA)control strategy of electric vehicles on split-μroads.Finally,the proposed control strategy is si-mulated in this paper.The simulation results show that the proposed strategy can accurately estimate the ground adhesion of the driving wheel on the low-adhesion side effectively preventing the vehicle from slipping back,and improving the dynamic performance of the vehicle under harsh conditions.
基金support from Natural Science Foundation of Shandong Province(ZR2022MB049,ZR2021MB104)the National Natural Science Foundation of China(22078174).
文摘CdS photocatalysts have broad application prospects in environmental purification,energy conversion,and organic synthesis.However,their practical use is often hindered by the rapid recombination of photo-generated electron-hole pairs,which limits their efficiency on various reactions.Controlling morphological structures and crystal facets engineering are effective methods to enhance the photocatalytic performance of CdS.In this work,two different forms of CdS photocatalysts were synthesized by a hydrothermal method,namely nanoflower-shaped (CdS-NF) and nanorod-shaped (CdS-NR) for hydrogen peroxide (H_(2)O_(2)) production.The exposed crystal planes of CdS-NF are mainly (0 0 2) planes,while the accesible crystal planes of CdS-NR are notablly (1 0 1) planes.Notably,the photocatalytic hydrogen peroxide production yield of CdS-NR was high at 1225.13 μmol·h^(−1)·g^(−1),which is 1.78 times higher than the H_(2)O_(2) generation rate of CdS-NF.Moreover,through free radical capture experiments and DFT calculations,the reaction pathway was further explored.Both different configurations of cadmium sulfide based photocatalysts conform to the reaction mechanism of oxygen reduction as the main and water oxidation as the auxiliary.
文摘Conventional multilevel inverters often suffer from high harmonic distortion and increased design complexity due to the need for numerous power semiconductor components,particularly at elevated voltage levels.Addressing these shortcomings,thiswork presents a robust 15-level PackedUCell(PUC)inverter topology designed for renewable energy and grid-connected applications.The proposed systemintegrates a sensor less proportional-resonant(PR)controller with an advanced carrier-based pulse width modulation scheme.This approach efficiently balances capacitor voltage,minimizes steady-state error,and strongly suppresses both zero and third-order harmonics resulting in reduced total harmonic distortion and enhanced voltage regulation.Additionally,a novel switching algorithm simplifies the design and implementation,further lowering voltage stress across switches.Extensive simulation results validate the performance under various resistive and resistive-inductive load conditions,demonstrating compliance with IEEE-519 THD standards and robust operation under dynamic changes.The proposed sensorless PR-controlled 15-PUC inverter thus offers a compelling,cost-effective solution for efficient power conversion in next-generation renewable energy systems.
