We analyzed the infrared 0R）-near infrared （NIR） 2D correlation spectra of drugs perturbed by temperature. By identification of functional groups by IR spectrum and by the correlation analysis of IR-NIR spectrum, w...We analyzed the infrared 0R）-near infrared （NIR） 2D correlation spectra of drugs perturbed by temperature. By identification of functional groups by IR spectrum and by the correlation analysis of IR-NIR spectrum, we identified the characteristic spectral bands that were closely related to the structure of a drug substance of interest. These characteristic spectral bands were relatively less interfered by other ingredients for analysis by the NIR correlation coefficient method. With these characteristic spectral bands, the accuracy of screening illegally added Sildenafil citrate, Tadalafil and Metforrnin hydrochloride in Chinese patent drugs and healthcare products reached about 90%, which met the requirements of rapid screening.展开更多
The influence of coarse aggregate content on concrete properties was investigated.From the perspective of Frame Concrete Theory,six groups concrete were produced with the same proportion except for coarse aggregate co...The influence of coarse aggregate content on concrete properties was investigated.From the perspective of Frame Concrete Theory,six groups concrete were produced with the same proportion except for coarse aggregate content,with coarse aggregate content of 0%,40%,50%,60%,75%,and 80%,respectively.Slump,compressive and flexural tensile strengths,elastic modulus,and water penetration were tested to research the effect of coarse aggregate content on concrete.The experimental results reveal that slump reduces with increasing of coarse aggregate content,while compressive strength,elastic modulus and flexural tensile strength increase with the coarse aggregate content increasing,and water penetration reduces with coarse aggregate content increasing before 75% then increased.Workability,strength,durability and economical indexes system were established to optimize the coarse aggregate content in concrete based on efficacy coefficient method.The optimization results show that when coarse aggregate content is 60%,the system efficacy coefficient reaches to 0.89,and it expresses the better comprehensive performance.展开更多
To evaluate the reliability of a landslide in a reservoir, the universal transfer coefficient method, which is popularized by the Chinese standard, is adopted as performance function in this study for： （1） common d...To evaluate the reliability of a landslide in a reservoir, the universal transfer coefficient method, which is popularized by the Chinese standard, is adopted as performance function in this study for： （1） common deterministic method stability evaluation; （2） reliability evaluation based on a Monte Carlo method; （3） comparison of landslide reliability under different water levels and under different correlation coefficients between soil shear strength parameters （c, Φ）, respectively with mean, standard deviation, reliability coefficient and failure probability. This article uses the Bazimen （八字门） landslide, which is located at the outlet of Xiangxi （香溪） River in the Three Gorges Reservoir, as an example to evaluate its stability and reliability under different water levels with two-dimensional deterministic and probabilistic methods. With the assumption that constant mean and normal distributed shear strength parameters （c, Φ）, correlation coefficient c, Φ=-1 based reliability analysis, compared with c, Φ=0 and 1, indicates obviously more increase of reliability index and lower standard deviation as water levels rise. To the case of a certain water level, c, Φ=-1 does not have constantly positive or negative effects on landslide reliability compared with c, Φ=0 or 1, but is associated with water level. Whereas the safety factor Fs by deterministic method, which is almost the same value as corresponding mean of safety factor from probabilistic analysis, will increase slightly as water level increases.展开更多
In the meizoseismal areas hit by the China Wenchuan earthquake on May 12, 2008, the disasterprone environment has changed dramatically, making the susceptibility assessment of debris flow more complex and uncertain. A...In the meizoseismal areas hit by the China Wenchuan earthquake on May 12, 2008, the disasterprone environment has changed dramatically, making the susceptibility assessment of debris flow more complex and uncertain. After the earthquake, debris flow hazards occurred frequently and effective susceptibility assessment of debris flow has become extremely important. Shenxi gully in Du Jiangyan city, located in the meizoseismal areas, was selected as the study area. Based on the research of disaster-prone environment and the main factors controlling debris flow, the susceptibility zonations of debris flow were mapped using factor weight method(FW), certainty coefficient method(CF) and geomorphic information entropy method(GI). Through comparative analysis, the study showed that these three methods underestimated susceptible degree of debris flow when used in the meizoseismal areas of Wenchuan earthquake. In order to solve this problem, this paper developed a modified certainty coefficient method(M-CF) to reflect the impact of rich loose materials on the susceptible degree of debris flow. In the modified method, the distribution and area of loose materials were obtained by field investigations and postearthquake remote sensing image, and four data sets, namely, lithology, elevation, slop and aspect, wereused to calculate the CF values. The result of M-CF method is in agreement with field investigations and the accuracy of the method is satisfied. The method has a wide application to the susceptibility assessment of debris flow in the earthquake stricken areas.展开更多
In order to evaluate the quality of water environment, the conception of entropy is applied in information science, and the entropy weight model is built to evaluate comprehensively water quality. The indexes weights ...In order to evaluate the quality of water environment, the conception of entropy is applied in information science, and the entropy weight model is built to evaluate comprehensively water quality. The indexes weights of water quality are determined by value of entropy. This kind of method is applied on evaluating water quality in the new water to be built. The result shows that the water quality in it which supply water is between grade Ⅲ and Ⅳ, and the result is similar to that of gray related method.展开更多
In order to evaluate the danger of debris flow properly, eight factors were selected as the risk assess- ment indexes of the debris flow, namely the vertical slope, valley relative difference, hillside slope, area of ...In order to evaluate the danger of debris flow properly, eight factors were selected as the risk assess- ment indexes of the debris flow, namely the vertical slope, valley relative difference, hillside slope, area of ba- sin, loose solid material reserves, the path length of sediment supply probability, silting and scouring derrieking and vegetation coverage. The improved Analytic Hierarchy Process （ AHP ） method was used to obtain the weights of the factors; and the efficacy coefficient method was adopted to evaluate the risks of six typical debris flow gullies. According to the research, the improved AHP method not only avoids the subjectivity in the indi- vidual factor valuation by comparing two factors of each layer, but also makes the subsequent consistency check unnecessary.展开更多
Due to the diversity of work requirements and environment,the number of degrees of freedom(DOFs)and the complexity of structure of industrial robots are constantly increasing.It is difficult to establish the accurate ...Due to the diversity of work requirements and environment,the number of degrees of freedom(DOFs)and the complexity of structure of industrial robots are constantly increasing.It is difficult to establish the accurate dynamical model of industrial robots,which greatly hinders the realization of a stable,fast and accurate trajectory tracking control.Therefore,the general expression of the constraint relation in the explicit dynamic equation of the multi-DOF industrial robot is derived on the basis of solving the Jacobian matrix and Hessian matrix by using the kinematic influence coefficients method.Moreover,an explicit dynamic equation with general constraint relation expression is established based on the Udwadia-Kalaba theory.The problem of increasing the time of establishing constraint relationship when the multi-DOF industrial robots complete complex task constraints is solved.With the SCARA robot as the research object,the simulation results show that the proposed method can provide a new idea for industrial robot system modeling with complex constraints.展开更多
The curve of landslide thrust plays a key role in landslide design.The commonly used transfer coefficient method(TCM)and Morgenstern-Price method(MPM)are analyzed.TCM does not take into account the moment balance betw...The curve of landslide thrust plays a key role in landslide design.The commonly used transfer coefficient method(TCM)and Morgenstern-Price method(MPM)are analyzed.TCM does not take into account the moment balance between slices.Although MPM considers the moment balance,the calculation is complex,and it does not consider that the force between slices may be less than zero at the back edge of the landslide.The rationality and feasibility of the improved MPM are verified by calculating the landslide stability coefficient and landslide thrust at different reservoir water levels.This paper studies the law of landslide thrust when the reservoir water level changes,and discusses the determination of design thrust,to provide a certain theoretical basis for the design of reservoir landslides.展开更多
The current popular methods for decision making and project optimisation in mine ventilation contain a number of deficiencies as they are solely based on either subjective knowledge or objective information.This paper...The current popular methods for decision making and project optimisation in mine ventilation contain a number of deficiencies as they are solely based on either subjective knowledge or objective information.This paper presents a new approach to rank the alternatives by G1-coefficient of variation method.The focus of this approach is the use of the combination weighing,which is able to compensate for the deficiencies in the method of evaluation index single weighing.In the case study,an appropriate evaluation index system was established to determine the evaluation value of each ventilation mode.Then the proposed approach was used to select the best development face ventilation mode.The result shows that the proposed approach is able to rank the alternative development face ventilation mode reasonably,the combination weighing method had the advantages of both subjective and objective weighing methods in that it took into consideration of both the experience and wisdom of experts,and the new changes in objective conditions.This approach provides a more reasonable and reliable procedure to analyse and evaluate different ventilation modes.展开更多
A real-time channel flood forecast model was developed to simulate channel flow in plain rivers based on the dynamic wave theory. Taking into consideration channel shape differences along the channel, a roughness upda...A real-time channel flood forecast model was developed to simulate channel flow in plain rivers based on the dynamic wave theory. Taking into consideration channel shape differences along the channel, a roughness updating technique was developed using the Kalman filter method to update Manning's roughness coefficient at each time step of the calculation processes. Channel shapes were simplified as rectangles, triangles, and parabolas, and the relationships between hydraulic radius and water depth were developed for plain rivers. Based on the relationship between the Froude number and the inertia terms of the momentum equation in the Saint-Venant equations, the relationship between Manning's roughness coefficient and water depth was obtained. Using the channel of the Huaihe River from Wangjiaba to Lutaizi stations as a case, to test the performance and rationality of the present flood routing model, the original hydraulic model was compared with the developed model. Results show that the stage hydrographs calculated by the developed flood routing model with the updated Manning's roughness coefficient have a good agreement with the observed stage hydrographs. This model performs better than the original hydraulic model.展开更多
In remote sensing sea surface temperature （SST）, the traditional fusion method is used to compute the dot product of a subjective weight vector with a satellite measurement vector, while the result requires validati...In remote sensing sea surface temperature （SST）, the traditional fusion method is used to compute the dot product of a subjective weight vector with a satellite measurement vector, while the result requires validation by field measurement. However, field measurement that relative to the satellite measurement is very sparse, many information may not be verified. A relative objective weight vector is constructed by using the limited field measurement, which is based on coefficient of variation method. And then it make an application of the data fusion by the weighted average method in the SST data. fuse SST data with the weighted average method. In this way, some posteriori information can be added to the fusion process. The model reduces the dependence on verification, and some of the satellite measurement can be handled without corresponding to the field measurement, and the fusion result matches transfer errors theory.展开更多
Based on the review of present force coefficients estimation methods, a new method in the frequency domain, revised cross-spectrum estimation method, is presented in this paper. Some experiments on the wave-current fo...Based on the review of present force coefficients estimation methods, a new method in the frequency domain, revised cross-spectrum estimation method, is presented in this paper. Some experiments on the wave-current force on inclined cylinders are also described and the wave current force coefficients are estimated by the revised cross-spectrum estimation method. From the results, it is found that the wave and current directions have some regular effect on the coefficients. According to the results, some empirical formulas are obtained for converting the wave-current force coefficients on inclined cylinders into a unified coefficient. Comparisons show that the unified coefficients are in good agreement with other results.展开更多
increasing penetration of renewable energy sources with a wide range of operating conditions causing power system uncertainties, conventional controllers are incapable of providing proper performance to keep the syste...increasing penetration of renewable energy sources with a wide range of operating conditions causing power system uncertainties, conventional controllers are incapable of providing proper performance to keep the system stable. However, controllable or dispatchable loads such as electric vehicles （EVs） and heat pumps （HPs） can be utilized for supplementary frequency control. This paper shows the ability of plug-in hybrid EVs, HPs, and batteries （BTs） to contribute in the frequency control of an isolated power system. Moreover, we propose a new online intelligent approach by using a coefficient diagram method （CDM） to enhance the system performance and robustness against uncertainties. The performance of the proposed intelligent CDM control has been compared with the proportional-integral （PI） controller and the superiority of the proposed scheme has been verified in Matiab/Simulink programs.展开更多
We propose and demonstrate to derive the Auger recombination coefficient by fitting efficiency-current and carrier lifetime-current curves simultaneously, which can minimize the uncertainty of fitting results. The obt...We propose and demonstrate to derive the Auger recombination coefficient by fitting efficiency-current and carrier lifetime-current curves simultaneously, which can minimize the uncertainty of fitting results. The obtained Auger recombination coefficient is 1.0x10(-31) cm(6)s(-1) in the present sample, which contributes slightly to efficiency droop effect.展开更多
Five phospholipids in human placenta were determined by phosphorus 31 nuclear magnetic resonance(^(31)P NMR)spectroscopy and thin-layer chromatography(TLC) scanning combined with the corrective method of absorbance pr...Five phospholipids in human placenta were determined by phosphorus 31 nuclear magnetic resonance(^(31)P NMR)spectroscopy and thin-layer chromatography(TLC) scanning combined with the corrective method of absorbance proportional coefficient. The NMR spectrometer used this investigation was a Bruker AM-500 spectrometer operating at 202.4 MHz for ^(31)P chemical shifts are relative to 85% phosphoric acid. TIC was carried out by silica gel H plate developed in chloroform-methanol-glacial acetic acid-ethanol-water(25:4:6:2:0.5),with Vaskovsky reagent as colour -developing agent of phospholipids.展开更多
We propose a high-order conservative method for the nonlinear Sehodinger/Gross-Pitaevskii equation with time- varying coefficients in modeling Bose Einstein condensation （BEC）. This scheme combined with the sixth-or...We propose a high-order conservative method for the nonlinear Sehodinger/Gross-Pitaevskii equation with time- varying coefficients in modeling Bose Einstein condensation （BEC）. This scheme combined with the sixth-order compact finite difference method and the fourth-order average vector field method, finely describes the condensate wave function and physical characteristics in some small potential wells. Numerical experiments are presented to demonstrate that our numerical scheme is efficient by the comparison with the Fourier pseudo-spectral method. Moreover, it preserves several conservation laws well and even exactly under some specific conditions.展开更多
Four rapid spectral comparison methods are introduced in mobile labs.They are conformity test method,general correlation coefficient method,reverse correlation coefficient method and correlation coefficient method usi...Four rapid spectral comparison methods are introduced in mobile labs.They are conformity test method,general correlation coefficient method,reverse correlation coefficient method and correlation coefficient method using characteristic spectral ranges.The first method is used for tracking the movements of drugs in the distribution channels;the second is used for quickly identify new counterfeit drugs;the last two are used to screen drugs illegally added in Traditional Chinese Medicine （TCM）.The applicability of the four methods is evaluated with counterfeit and authentic drugs.Our results show that these methods can be quickly constructed and used to identify counterfeit drugs accurately.展开更多
In the context of the era of carbon peaking and carbon neutrality,clarifying the emission patterns of non-CO_(2)Greenhouse Gas(GHG)from agricultural sources is of practical significance to China’s implementation of g...In the context of the era of carbon peaking and carbon neutrality,clarifying the emission patterns of non-CO_(2)Greenhouse Gas(GHG)from agricultural sources is of practical significance to China’s implementation of greenhouse gas emission reduction policies.The Intergovernmental Panel on Climate Change(IPCC)coefficient method was used to calculate non-CO_(2)GHG emissions from agricultural sources in 122 counties in Hunan Province,China,from 2010 to 2020,and the spatiotemporal evolution characteristics of emission intensity were analyzed.The Stochastic Impacts by Regression on Population,Affluence,and Technology(STRIPAT)model forecasted the prospective evolution of non-CO_(2)GHG emissions from agricultural sources at the county level under various scenarios from 2030 to 2050.The results demonstrated a general decline in non-CO_(2)GHG emissions from agricultural sources within the study area,with 75.41%of counties exhibiting a reduction in emissions.Geographically,emissions were higher in the Dongting Lake area and central Hengyang.The emission intensity per unit of agricultural added value and the intensity per unit of agricultural land area showed an overall downward trend.Spatially,the emission intensity per unit of farmland area in a few counties(cities,districts)in southern Hunan was still relatively high.By forecasting the non-CO_(2)GHG emissions from agricultural sources,the majority of counties(cities and districts)demonstrated a gradual decline in emissions,suggesting that agricultural production had the potential to reduce emissions in the future,while also facing certain pressure to reduce emissions.It is recommended that Hunan Province formulate agricultural carbon emission reduction policies that take regional development differences into account.This would provide a reference for future agricultural carbon emission reduction research in the whole country.展开更多
For natural water, method of water quality evaluation based on improved fuzzy matter-element evaluation method is presented. Two important parts are improved, the weights determining and fuzzy membership functions. Th...For natural water, method of water quality evaluation based on improved fuzzy matter-element evaluation method is presented. Two important parts are improved, the weights determining and fuzzy membership functions. The coefficient of variation of each indicator is used to determine the weight instead of traditional calculating superscales method. On the other hand, fuzzy matter-elements are constructed, and normal membership degrees are used instead of traditional trapezoidal ones. The composite fuzzy matter-elements with associated coefficient are constructed through associated transformation. The levels of natural water quality are determined according to the principle of maximum correlation. The improved fuzzy matter-element evaluation method is applied to evaluate water quality of the Luokou mainstream estuary at the first ten weeks in 2011 with the coefficient of variatiola method determining the weights. Water quality of Luokou mainstream estuary is dropping from level I to level II. The results of the improved evaluation method are basically the same as the official water quality. The variation coefficient method can reduce the workload, and overcome the adverse effects from abnormal values, compared with the traditional calculating superscales method. The results of improved fuzzy matter- element evaluation method are more credible than the ones of the traditional evaluation method. The improved evaluation method can use information of monitoring data more scientifically and comprehensively, and broaden a new evaluation method for water quality assessment.展开更多
Aiming at the existing problems of discrete cosine transform(DCT) de-noising method, we introduce the idea of wavelet neighboring coefficients(WNC) de-noising method, and propose the cosine neighboring coefficients(CN...Aiming at the existing problems of discrete cosine transform(DCT) de-noising method, we introduce the idea of wavelet neighboring coefficients(WNC) de-noising method, and propose the cosine neighboring coefficients(CNC) de-noising method. Based on DCT, a novel method for the fault feature extraction of hydraulic pump is analyzed. The vibration signal of pump is de-noised with CNC de-noising method, and the fault feature is extracted by performing Hilbert-Huang transform(HHT) to the output signal. The analysis results of the simulation signal and the actual one demonstrate that the proposed CNC de-noising method and the fault feature extraction method have more superior ability than the traditional ones.展开更多
基金National Key Technology R & D Program-On-site Rapid Identification of Drug Research Project (Grant No. 2008BAI55B06)
文摘We analyzed the infrared 0R）-near infrared （NIR） 2D correlation spectra of drugs perturbed by temperature. By identification of functional groups by IR spectrum and by the correlation analysis of IR-NIR spectrum, we identified the characteristic spectral bands that were closely related to the structure of a drug substance of interest. These characteristic spectral bands were relatively less interfered by other ingredients for analysis by the NIR correlation coefficient method. With these characteristic spectral bands, the accuracy of screening illegally added Sildenafil citrate, Tadalafil and Metforrnin hydrochloride in Chinese patent drugs and healthcare products reached about 90%, which met the requirements of rapid screening.
基金Funded by the National Mega-project of Scientific & Technical Supporting Programs,Ministry of Science & Technology of China(No.2006BAJ04A04)the Education Department of Liaoning Province,China(No. 2008282)
文摘The influence of coarse aggregate content on concrete properties was investigated.From the perspective of Frame Concrete Theory,six groups concrete were produced with the same proportion except for coarse aggregate content,with coarse aggregate content of 0%,40%,50%,60%,75%,and 80%,respectively.Slump,compressive and flexural tensile strengths,elastic modulus,and water penetration were tested to research the effect of coarse aggregate content on concrete.The experimental results reveal that slump reduces with increasing of coarse aggregate content,while compressive strength,elastic modulus and flexural tensile strength increase with the coarse aggregate content increasing,and water penetration reduces with coarse aggregate content increasing before 75% then increased.Workability,strength,durability and economical indexes system were established to optimize the coarse aggregate content in concrete based on efficacy coefficient method.The optimization results show that when coarse aggregate content is 60%,the system efficacy coefficient reaches to 0.89,and it expresses the better comprehensive performance.
基金supported by the German Federal Ministry of Education and Research (BMBF)
文摘To evaluate the reliability of a landslide in a reservoir, the universal transfer coefficient method, which is popularized by the Chinese standard, is adopted as performance function in this study for： （1） common deterministic method stability evaluation; （2） reliability evaluation based on a Monte Carlo method; （3） comparison of landslide reliability under different water levels and under different correlation coefficients between soil shear strength parameters （c, Φ）, respectively with mean, standard deviation, reliability coefficient and failure probability. This article uses the Bazimen （八字门） landslide, which is located at the outlet of Xiangxi （香溪） River in the Three Gorges Reservoir, as an example to evaluate its stability and reliability under different water levels with two-dimensional deterministic and probabilistic methods. With the assumption that constant mean and normal distributed shear strength parameters （c, Φ）, correlation coefficient c, Φ=-1 based reliability analysis, compared with c, Φ=0 and 1, indicates obviously more increase of reliability index and lower standard deviation as water levels rise. To the case of a certain water level, c, Φ=-1 does not have constantly positive or negative effects on landslide reliability compared with c, Φ=0 or 1, but is associated with water level. Whereas the safety factor Fs by deterministic method, which is almost the same value as corresponding mean of safety factor from probabilistic analysis, will increase slightly as water level increases.
基金Financial support was provided by Ministry of Water Resources welfare industry funding(Grant No.201301058)Key Laboratory of Mountain Hazards and Earth Surface Processes independent project funding:Dynamic process and buried risk of debris flow in Shenxi gully after Wenchuan earthquakethe international cooperation project of Ministry of Science and Technology(Grant No.2013DFA21720)
文摘In the meizoseismal areas hit by the China Wenchuan earthquake on May 12, 2008, the disasterprone environment has changed dramatically, making the susceptibility assessment of debris flow more complex and uncertain. After the earthquake, debris flow hazards occurred frequently and effective susceptibility assessment of debris flow has become extremely important. Shenxi gully in Du Jiangyan city, located in the meizoseismal areas, was selected as the study area. Based on the research of disaster-prone environment and the main factors controlling debris flow, the susceptibility zonations of debris flow were mapped using factor weight method(FW), certainty coefficient method(CF) and geomorphic information entropy method(GI). Through comparative analysis, the study showed that these three methods underestimated susceptible degree of debris flow when used in the meizoseismal areas of Wenchuan earthquake. In order to solve this problem, this paper developed a modified certainty coefficient method(M-CF) to reflect the impact of rich loose materials on the susceptible degree of debris flow. In the modified method, the distribution and area of loose materials were obtained by field investigations and postearthquake remote sensing image, and four data sets, namely, lithology, elevation, slop and aspect, wereused to calculate the CF values. The result of M-CF method is in agreement with field investigations and the accuracy of the method is satisfied. The method has a wide application to the susceptibility assessment of debris flow in the earthquake stricken areas.
文摘In order to evaluate the quality of water environment, the conception of entropy is applied in information science, and the entropy weight model is built to evaluate comprehensively water quality. The indexes weights of water quality are determined by value of entropy. This kind of method is applied on evaluating water quality in the new water to be built. The result shows that the water quality in it which supply water is between grade Ⅲ and Ⅳ, and the result is similar to that of gray related method.
文摘In order to evaluate the danger of debris flow properly, eight factors were selected as the risk assess- ment indexes of the debris flow, namely the vertical slope, valley relative difference, hillside slope, area of ba- sin, loose solid material reserves, the path length of sediment supply probability, silting and scouring derrieking and vegetation coverage. The improved Analytic Hierarchy Process （ AHP ） method was used to obtain the weights of the factors; and the efficacy coefficient method was adopted to evaluate the risks of six typical debris flow gullies. According to the research, the improved AHP method not only avoids the subjectivity in the indi- vidual factor valuation by comparing two factors of each layer, but also makes the subsequent consistency check unnecessary.
基金the Beijing Municipal Scienceand Technology Project (No.KM202111417006)the Academic Research Projects of Beijing Union University (Nos.ZK10202305 and ZK80202004)the Beijing Municipal Science and Technology Project (No.KM202111417005)。
文摘Due to the diversity of work requirements and environment,the number of degrees of freedom(DOFs)and the complexity of structure of industrial robots are constantly increasing.It is difficult to establish the accurate dynamical model of industrial robots,which greatly hinders the realization of a stable,fast and accurate trajectory tracking control.Therefore,the general expression of the constraint relation in the explicit dynamic equation of the multi-DOF industrial robot is derived on the basis of solving the Jacobian matrix and Hessian matrix by using the kinematic influence coefficients method.Moreover,an explicit dynamic equation with general constraint relation expression is established based on the Udwadia-Kalaba theory.The problem of increasing the time of establishing constraint relationship when the multi-DOF industrial robots complete complex task constraints is solved.With the SCARA robot as the research object,the simulation results show that the proposed method can provide a new idea for industrial robot system modeling with complex constraints.
基金supported by the Key Program of National Natural Science Foundation of China(No.41630643)the National Key Research and Development Program of China(No.2017YFC1501302)+1 种基金the Fundamental Research Funds for the Central Universities,China University of Geosciences(Wuhan)(No.CUGCJ1701)the Science and Technology Projects of the Huaneng Lancang River Hydropower Co.,Ltd.(No.HNKJ18-H24).
文摘The curve of landslide thrust plays a key role in landslide design.The commonly used transfer coefficient method(TCM)and Morgenstern-Price method(MPM)are analyzed.TCM does not take into account the moment balance between slices.Although MPM considers the moment balance,the calculation is complex,and it does not consider that the force between slices may be less than zero at the back edge of the landslide.The rationality and feasibility of the improved MPM are verified by calculating the landslide stability coefficient and landslide thrust at different reservoir water levels.This paper studies the law of landslide thrust when the reservoir water level changes,and discusses the determination of design thrust,to provide a certain theoretical basis for the design of reservoir landslides.
基金Projects(51504286,51374242)supported by the National Natural Science Foundation of ChinaProject(2015M572270)supported by China Postdoctoral Science FoundationProject(2015RS4004)supported by the Science and Technology Plan of Hunan Province,China
文摘The current popular methods for decision making and project optimisation in mine ventilation contain a number of deficiencies as they are solely based on either subjective knowledge or objective information.This paper presents a new approach to rank the alternatives by G1-coefficient of variation method.The focus of this approach is the use of the combination weighing,which is able to compensate for the deficiencies in the method of evaluation index single weighing.In the case study,an appropriate evaluation index system was established to determine the evaluation value of each ventilation mode.Then the proposed approach was used to select the best development face ventilation mode.The result shows that the proposed approach is able to rank the alternative development face ventilation mode reasonably,the combination weighing method had the advantages of both subjective and objective weighing methods in that it took into consideration of both the experience and wisdom of experts,and the new changes in objective conditions.This approach provides a more reasonable and reliable procedure to analyse and evaluate different ventilation modes.
基金supported by the Special Fund for Public Welfare(Meteorology)of China(Grants No.GYHY201006037 and GYHY200906007)
文摘A real-time channel flood forecast model was developed to simulate channel flow in plain rivers based on the dynamic wave theory. Taking into consideration channel shape differences along the channel, a roughness updating technique was developed using the Kalman filter method to update Manning's roughness coefficient at each time step of the calculation processes. Channel shapes were simplified as rectangles, triangles, and parabolas, and the relationships between hydraulic radius and water depth were developed for plain rivers. Based on the relationship between the Froude number and the inertia terms of the momentum equation in the Saint-Venant equations, the relationship between Manning's roughness coefficient and water depth was obtained. Using the channel of the Huaihe River from Wangjiaba to Lutaizi stations as a case, to test the performance and rationality of the present flood routing model, the original hydraulic model was compared with the developed model. Results show that the stage hydrographs calculated by the developed flood routing model with the updated Manning's roughness coefficient have a good agreement with the observed stage hydrographs. This model performs better than the original hydraulic model.
基金Project supported by the National Natural Science Foundation of China(Grant No.40976108)the Shanghai Leading Academic Discipline Project(Grant No.J50103)
文摘In remote sensing sea surface temperature （SST）, the traditional fusion method is used to compute the dot product of a subjective weight vector with a satellite measurement vector, while the result requires validation by field measurement. However, field measurement that relative to the satellite measurement is very sparse, many information may not be verified. A relative objective weight vector is constructed by using the limited field measurement, which is based on coefficient of variation method. And then it make an application of the data fusion by the weighted average method in the SST data. fuse SST data with the weighted average method. In this way, some posteriori information can be added to the fusion process. The model reduces the dependence on verification, and some of the satellite measurement can be handled without corresponding to the field measurement, and the fusion result matches transfer errors theory.
文摘Based on the review of present force coefficients estimation methods, a new method in the frequency domain, revised cross-spectrum estimation method, is presented in this paper. Some experiments on the wave-current force on inclined cylinders are also described and the wave current force coefficients are estimated by the revised cross-spectrum estimation method. From the results, it is found that the wave and current directions have some regular effect on the coefficients. According to the results, some empirical formulas are obtained for converting the wave-current force coefficients on inclined cylinders into a unified coefficient. Comparisons show that the unified coefficients are in good agreement with other results.
文摘increasing penetration of renewable energy sources with a wide range of operating conditions causing power system uncertainties, conventional controllers are incapable of providing proper performance to keep the system stable. However, controllable or dispatchable loads such as electric vehicles （EVs） and heat pumps （HPs） can be utilized for supplementary frequency control. This paper shows the ability of plug-in hybrid EVs, HPs, and batteries （BTs） to contribute in the frequency control of an isolated power system. Moreover, we propose a new online intelligent approach by using a coefficient diagram method （CDM） to enhance the system performance and robustness against uncertainties. The performance of the proposed intelligent CDM control has been compared with the proportional-integral （PI） controller and the superiority of the proposed scheme has been verified in Matiab/Simulink programs.
基金Supported by the National Key Research and Development Program of China under Grant No 2016YFB0400102the National Basic Research Program of China under Grant Nos 2012CB3155605,2013CB632804,2014CB340002 and 2015CB351900+6 种基金the National Natural Science Foundation of China under Grant Nos 61574082,61210014,61321004,61307024,and 51561165012the High-Technology Research and Development Program of China under Grant No 2015AA017101the Tsinghua University Initiative Scientific Research Program under Grant Nos 2013023Z09N and 2015THZ02-3the Open Fund of the State Key Laboratory on Integrated Optoelectronics under Grant No IOSKL2015KF10the CAEP Microsystem and THz Science and Technology Foundation under Grant No CAEPMT201505the Science Challenge Project under Grant No JCKY2016212A503the Guangdong Province Science and Technology Program under Grant No 2014B010121004
文摘We propose and demonstrate to derive the Auger recombination coefficient by fitting efficiency-current and carrier lifetime-current curves simultaneously, which can minimize the uncertainty of fitting results. The obtained Auger recombination coefficient is 1.0x10(-31) cm(6)s(-1) in the present sample, which contributes slightly to efficiency droop effect.
文摘Five phospholipids in human placenta were determined by phosphorus 31 nuclear magnetic resonance(^(31)P NMR)spectroscopy and thin-layer chromatography(TLC) scanning combined with the corrective method of absorbance proportional coefficient. The NMR spectrometer used this investigation was a Bruker AM-500 spectrometer operating at 202.4 MHz for ^(31)P chemical shifts are relative to 85% phosphoric acid. TIC was carried out by silica gel H plate developed in chloroform-methanol-glacial acetic acid-ethanol-water(25:4:6:2:0.5),with Vaskovsky reagent as colour -developing agent of phospholipids.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11571366 and 11501570the Open Foundation of State Key Laboratory of High Performance Computing of China+1 种基金the Research Fund of National University of Defense Technology under Grant No JC15-02-02the Fund from HPCL
文摘We propose a high-order conservative method for the nonlinear Sehodinger/Gross-Pitaevskii equation with time- varying coefficients in modeling Bose Einstein condensation （BEC）. This scheme combined with the sixth-order compact finite difference method and the fourth-order average vector field method, finely describes the condensate wave function and physical characteristics in some small potential wells. Numerical experiments are presented to demonstrate that our numerical scheme is efficient by the comparison with the Fourier pseudo-spectral method. Moreover, it preserves several conservation laws well and even exactly under some specific conditions.
基金National Key Technologies R&D Program Foundation of China(Grant No.2008BAI55B06).
文摘Four rapid spectral comparison methods are introduced in mobile labs.They are conformity test method,general correlation coefficient method,reverse correlation coefficient method and correlation coefficient method using characteristic spectral ranges.The first method is used for tracking the movements of drugs in the distribution channels;the second is used for quickly identify new counterfeit drugs;the last two are used to screen drugs illegally added in Traditional Chinese Medicine （TCM）.The applicability of the four methods is evaluated with counterfeit and authentic drugs.Our results show that these methods can be quickly constructed and used to identify counterfeit drugs accurately.
基金Under the auspices of the National Natural Science Foundation of China(No.42471241,41971219,41571168)Hunan Provincial Natural Science Foundation(No.2020JJ4372)。
文摘In the context of the era of carbon peaking and carbon neutrality,clarifying the emission patterns of non-CO_(2)Greenhouse Gas(GHG)from agricultural sources is of practical significance to China’s implementation of greenhouse gas emission reduction policies.The Intergovernmental Panel on Climate Change(IPCC)coefficient method was used to calculate non-CO_(2)GHG emissions from agricultural sources in 122 counties in Hunan Province,China,from 2010 to 2020,and the spatiotemporal evolution characteristics of emission intensity were analyzed.The Stochastic Impacts by Regression on Population,Affluence,and Technology(STRIPAT)model forecasted the prospective evolution of non-CO_(2)GHG emissions from agricultural sources at the county level under various scenarios from 2030 to 2050.The results demonstrated a general decline in non-CO_(2)GHG emissions from agricultural sources within the study area,with 75.41%of counties exhibiting a reduction in emissions.Geographically,emissions were higher in the Dongting Lake area and central Hengyang.The emission intensity per unit of agricultural added value and the intensity per unit of agricultural land area showed an overall downward trend.Spatially,the emission intensity per unit of farmland area in a few counties(cities,districts)in southern Hunan was still relatively high.By forecasting the non-CO_(2)GHG emissions from agricultural sources,the majority of counties(cities and districts)demonstrated a gradual decline in emissions,suggesting that agricultural production had the potential to reduce emissions in the future,while also facing certain pressure to reduce emissions.It is recommended that Hunan Province formulate agricultural carbon emission reduction policies that take regional development differences into account.This would provide a reference for future agricultural carbon emission reduction research in the whole country.
基金supported by the National Natural Science Foundation of China (No. 41071322, 71031001)
文摘For natural water, method of water quality evaluation based on improved fuzzy matter-element evaluation method is presented. Two important parts are improved, the weights determining and fuzzy membership functions. The coefficient of variation of each indicator is used to determine the weight instead of traditional calculating superscales method. On the other hand, fuzzy matter-elements are constructed, and normal membership degrees are used instead of traditional trapezoidal ones. The composite fuzzy matter-elements with associated coefficient are constructed through associated transformation. The levels of natural water quality are determined according to the principle of maximum correlation. The improved fuzzy matter-element evaluation method is applied to evaluate water quality of the Luokou mainstream estuary at the first ten weeks in 2011 with the coefficient of variatiola method determining the weights. Water quality of Luokou mainstream estuary is dropping from level I to level II. The results of the improved evaluation method are basically the same as the official water quality. The variation coefficient method can reduce the workload, and overcome the adverse effects from abnormal values, compared with the traditional calculating superscales method. The results of improved fuzzy matter- element evaluation method are more credible than the ones of the traditional evaluation method. The improved evaluation method can use information of monitoring data more scientifically and comprehensively, and broaden a new evaluation method for water quality assessment.
基金the National Natural Science Foundation of China(No.51275524)the General Armaments Department Equipment Support Research Project
文摘Aiming at the existing problems of discrete cosine transform(DCT) de-noising method, we introduce the idea of wavelet neighboring coefficients(WNC) de-noising method, and propose the cosine neighboring coefficients(CNC) de-noising method. Based on DCT, a novel method for the fault feature extraction of hydraulic pump is analyzed. The vibration signal of pump is de-noised with CNC de-noising method, and the fault feature is extracted by performing Hilbert-Huang transform(HHT) to the output signal. The analysis results of the simulation signal and the actual one demonstrate that the proposed CNC de-noising method and the fault feature extraction method have more superior ability than the traditional ones.
