Single event upsets(SEUs) induced by heavy ions were observed in 65 nm SRAMs to quantitatively evaluate the applicability and effectiveness of single-bit error correcting code(ECC) utilizing Hamming Code.The results s...Single event upsets(SEUs) induced by heavy ions were observed in 65 nm SRAMs to quantitatively evaluate the applicability and effectiveness of single-bit error correcting code(ECC) utilizing Hamming Code.The results show that the ECC did improve the performance dramatically,with the SEU cross sections of SRAMs with ECC being at the order of 10^(-11) cm^2/bit,two orders of magnitude higher than that without ECC(at the order of 10^(-9) cm^2/bit).Also,ineffectiveness of ECC module,including 1-,2- and 3-bits errors in single word(not Multiple Bit Upsets),was detected.The ECC modules in SRAMs utilizing(12,8) Hamming code would lose work when 2-bits upset accumulates in one codeword.Finally,the probabilities of failure modes involving 1-,2- and 3-bits errors,were calcaulated at 39.39%,37.88%and 22.73%,respectively,which agree well with the experimental results.展开更多
The variable block-size motion estimation(ME) and disparity estimation(DE) are adopted in multi-view video coding(MVC) to achieve high coding efficiency. However, much higher computational complexity is also introduce...The variable block-size motion estimation(ME) and disparity estimation(DE) are adopted in multi-view video coding(MVC) to achieve high coding efficiency. However, much higher computational complexity is also introduced in coding system, which hinders practical application of MVC. An efficient fast mode decision method using mode complexity is proposed to reduce the computational complexity. In the proposed method, mode complexity is firstly computed by using the spatial, temporal and inter-view correlation between the current macroblock(MB) and its neighboring MBs. Based on the observation that direct mode is highly possible to be the optimal mode, mode complexity is always checked in advance whether it is below a predefined threshold for providing an efficient early termination opportunity. If this early termination condition is not met, three mode types for the MBs are classified according to the value of mode complexity, i.e., simple mode, medium mode and complex mode, to speed up the encoding process by reducing the number of the variable block modes required to be checked. Furthermore, for simple and medium mode region, the rate distortion(RD) cost of mode 16×16 in the temporal prediction direction is compared with that of the disparity prediction direction, to determine in advance whether the optimal prediction direction is in the temporal prediction direction or not, for skipping unnecessary disparity estimation. Experimental results show that the proposed method is able to significantly reduce the computational load by 78.79% and the total bit rate by 0.07% on average, while only incurring a negligible loss of PSNR(about 0.04 d B on average), compared with the full mode decision(FMD) in the reference software of MVC.展开更多
To solve the problems of the AMR-WB+(Extended Adaptive Multi-Rate-WideBand) semi-open-loop coding mode selection algorithm,features for ACELP(Algebraic Code Excited Linear Prediction) and TCX(Transform Coded eXcitatio...To solve the problems of the AMR-WB+(Extended Adaptive Multi-Rate-WideBand) semi-open-loop coding mode selection algorithm,features for ACELP(Algebraic Code Excited Linear Prediction) and TCX(Transform Coded eXcitation) classification are investigated.11 classifying features in the AMR-WB+ codec are selected and 2 novel classifying features,i.e.,EFM(Energy Flatness Measurement) and stdEFM(standard deviation of EFM),are proposed.Consequently,a novel semi-open-loop mode selection algorithm based on EFM and selected AMR-WB+ features is proposed.The results of classifying test and listening test show that the performance of the novel algorithm is much better than that of the AMR-WB+ semi-open-loop coding mode selection algorithm.展开更多
Design of video encoders involves implementation of fast mode decision(FMD) algorithm to reduce computation complexity while maintaining the performance of the coding. Although H.264/scalable video coding(SVC) achieve...Design of video encoders involves implementation of fast mode decision(FMD) algorithm to reduce computation complexity while maintaining the performance of the coding. Although H.264/scalable video coding(SVC) achieves high scalability and coding efficiency, it also has high complexity in implementing its exhaustive computation. In this paper, a novel algorithm is proposed to reduce the redundant candidate modes by making use of the correlation among layers. A desired mode list is created based on the probability to be the best mode for each block in base layer and a candidate mode selection in the enhancement layer by the correlations of modes among reference frame and current frame. Our algorithm is implemented in joint scalable video model(JSVM)9.19.15 reference software and the performance is evaluated based on the average encoding time, peak signal to noise ration(PSNR)and bit rate. The experimental results show 41.89% improvement in encoding time with minimal loss of 0.02 dB in PSNR and 0.05%increase in bit rate.展开更多
In order to reduce the encoding complexity of macroblock coding mode decision in H.264/AVC, a selective smaller block-size searching algorithm and a selective intra coding mode searching algorithm are proposed by usin...In order to reduce the encoding complexity of macroblock coding mode decision in H.264/AVC, a selective smaller block-size searching algorithm and a selective intra coding mode searching algorithm are proposed by using the high correlation among coding modes and in spatial and temporal domains of video sequence. Simulation results demonstrate that the proposed algorithm can provide significant improvement in computational requirement, with negligible small picture quality degradation and slight bit rate increase.展开更多
Variable size motion estimation （ME） and disparity estimation （DE） are employed to select the best coding mode for each macroblock （MB） in the current joint multiview video model （JMVM）. This technique achieve...Variable size motion estimation （ME） and disparity estimation （DE） are employed to select the best coding mode for each macroblock （MB） in the current joint multiview video model （JMVM）. This technique achieves the highest possible coding efficiency, but it results in extremely large computation complexity which obstructs the multiview video coding （MVC） from practical application. This paper proposes an adaptive early termination of fast mode decision algorithm for MVC. It makes use of the coding information of the corresponding MBs in neighbor view based on inter-view correlation to early terminate the mode decision procedure. Experimental results show that the proposed fast mode decision algorithm can achieve computational 50% computation saving with no significant loss of rate distortion （RD） performance.展开更多
The complex systems are often in the structure of multi-operating modes, and the components implementing system functions are different under different operation modes, which results in the problems that components of...The complex systems are often in the structure of multi-operating modes, and the components implementing system functions are different under different operation modes, which results in the problems that components often fail in different operating modes, faults can be only detected in specified operating modes, tests can be available in specified operating modes,and the cost and efficiency of detecting and isolating faults are different under different operating modes and isolation levels. Aiming at these problems, an optimal test selection method for fault detection and isolation in the multi-operating mode system is proposed by using the fault pair coding and rollout algorithm. Firstly,the faults in fault-test correlation matrices under different operating modes are combined to fault-pairs, which is used to construct the fault pair-test correlation matrices under different operating modes.Secondly, the final fault pair-test correlation matrix of the multioperating mode system is obtained by operating the fault pair-test correlation matrices under different operating modes. Based on the final fault pair-test correlation matrix, the necessary tests are selected by the rollout algorithm orderly. Finally, the effectiveness of the proposed method is verified by examples of the optimal test selection in the multi-operating mode system with faults isolated to different levels. The result shows that the proposed method can effectively mine the fault detection and isolation ability of tests and it is suitable for the optimal test selection of the multi-operating mode system with faults isolated to the replacement unit and specific fault.展开更多
This paper describes the fishbone mode phenomena during the injection of highpower neutral beams in EAST（Experimental Advanced Superconducting Tokamak）.The features of the fishbone mode are presented.The change in f...This paper describes the fishbone mode phenomena during the injection of highpower neutral beams in EAST（Experimental Advanced Superconducting Tokamak）.The features of the fishbone mode are presented.The change in frequency of the mode during a fishbone burst is from 1 kHz to 6 kHz.The nonlinear behavior of the fishbone mode is analyzed by using a prey-predator model,which is consistent with the experimental results.This model indicates that the periodic oscillations of the fishbone mode always occur near the critical value of fast ion beta.Furthermore,the neutral beam analysis for the discharge is done by using the NUBEAM module of the TRANSP code.According to the numerical simulation results and theoretical calculation,it can be concluded that the fishbone mode is driven by the deeply trapped energetic beam ions in EAST.展开更多
H.264 video coding standard introduces motion estimation with multiple block sizes to achieve a considerably higher coding efficiency than other video coding algorithms. However, this comes at the greatly increased co...H.264 video coding standard introduces motion estimation with multiple block sizes to achieve a considerably higher coding efficiency than other video coding algorithms. However, this comes at the greatly increased computing complexity at the encoder. In this paper, a method is proposed to eliminate some redundant coding modes that contribute very little coding gain. The simulation results show that the algorithm can remarkably decrease the complexity at the encoder while keeping satisfying coding efficiency.展开更多
To decrease the computational complexity of adaptive inter-layer prediction and improve the encoding efficiency in sealable video coding, a mode decision algorithm is proposed by exploiting the part of used candidate ...To decrease the computational complexity of adaptive inter-layer prediction and improve the encoding efficiency in sealable video coding, a mode decision algorithm is proposed by exploiting the part of used candidate modes of the co-located reference macrobloeks for Hierarchical-B pictures. This scheme reduces the amount of the candidate modes to generate a dynamic list for the current encoding macroblock according to the statistical information derived from the co-located reference macroblocks in different temporal levels. The experimental results show that this fast algorithm reduces approximately 31% encoding time on average with the negligible loss of encoding performance.展开更多
In this paper, we will try to find a universal theoretical model and approximate solutions which can be applied to both mode shape and normal shape actuators and sensors, and which can be predicted the gain of the fir...In this paper, we will try to find a universal theoretical model and approximate solutions which can be applied to both mode shape and normal shape actuators and sensors, and which can be predicted the gain of the first three modes of the mode shape and normal shape actuators and sensors, finally through computer simulation analysis to validate. In order to prove the feasibility of the theory and as well as convenient to use on the electro-mechanical engineering, we will try to simplify the three-dimension structure problem into an one-dimension structure problem. Furthermore we will design one kind of bimorph type piezoelectric cantilever beam, so that it can be used as with the actuator and sensor simultaneously, but also conducive to the theory and simulation analysis. As for the simulation analysis, we will use the ANSYS code.展开更多
In the present paper,we first derive the eigenmode equation of the ideal ballooning mode in tokamak plasmas using a gyrokinetic equation.It is shown that the gyrokinetic eigenmode equation can be reduced to the magnet...In the present paper,we first derive the eigenmode equation of the ideal ballooning mode in tokamak plasmas using a gyrokinetic equation.It is shown that the gyrokinetic eigenmode equation can be reduced to the magnetohydrodynamic（MHD） form in the long wavelength limit when kinetic effects are ignored.Then,the global gyrokinetic toroidal code（GTC） is applied for simulations of the edge-localized ideal ballooning modes.The obtained mode structures are compared with the results of ideal MHD simulations.The observed scaling of the linear growth rate with the toroidal mode number is consistent with the ideal MHD theory.The simulation results verify the GTC capability of simulating MHD processes in toroidal plasmas.展开更多
高效视频编码(high efficiency video coding,HEVC)相较于上一代编码标准H.264降低了约50%的比特率,但为了提高帧内预测的准确性,HEVC提出的35种预测模式导致计算量大幅增加,对软件和硬件实现均构成了挑战.针对该问题,在HEVC的基础上提...高效视频编码(high efficiency video coding,HEVC)相较于上一代编码标准H.264降低了约50%的比特率,但为了提高帧内预测的准确性,HEVC提出的35种预测模式导致计算量大幅增加,对软件和硬件实现均构成了挑战.针对该问题,在HEVC的基础上提出了一种依据图片纹理方向,结合预测模式之间的关联性来确定帧内预测模式的快速算法.实验结果表明,本算法与HEVC参考软件HM16.20相比,在BD-Rate损失仅为5.79%的情况下,节省46%以上的编码时间,显著降低了帧内预测模式决策的复杂度,便于在嵌入式系统等硬件资源有限的端侧实现算法落地.展开更多
基金Supported by the National Natural Science Foundation of China(Nos.11079045 and 11179003)the Important Direction Project of the CAS Knowledge Innovation Program(No.KJCX2-YW-N27)
文摘Single event upsets(SEUs) induced by heavy ions were observed in 65 nm SRAMs to quantitatively evaluate the applicability and effectiveness of single-bit error correcting code(ECC) utilizing Hamming Code.The results show that the ECC did improve the performance dramatically,with the SEU cross sections of SRAMs with ECC being at the order of 10^(-11) cm^2/bit,two orders of magnitude higher than that without ECC(at the order of 10^(-9) cm^2/bit).Also,ineffectiveness of ECC module,including 1-,2- and 3-bits errors in single word(not Multiple Bit Upsets),was detected.The ECC modules in SRAMs utilizing(12,8) Hamming code would lose work when 2-bits upset accumulates in one codeword.Finally,the probabilities of failure modes involving 1-,2- and 3-bits errors,were calcaulated at 39.39%,37.88%and 22.73%,respectively,which agree well with the experimental results.
基金Project(08Y29-7)supported by the Transportation Science and Research Program of Jiangsu Province,ChinaProject(201103051)supported by the Major Infrastructure Program of the Health Monitoring System Hardware Platform Based on Sensor Network Node,China+1 种基金Project(61100111)supported by the National Natural Science Foundation of ChinaProject(BE2011169)supported by the Scientific and Technical Supporting Program of Jiangsu Province,China
文摘The variable block-size motion estimation(ME) and disparity estimation(DE) are adopted in multi-view video coding(MVC) to achieve high coding efficiency. However, much higher computational complexity is also introduced in coding system, which hinders practical application of MVC. An efficient fast mode decision method using mode complexity is proposed to reduce the computational complexity. In the proposed method, mode complexity is firstly computed by using the spatial, temporal and inter-view correlation between the current macroblock(MB) and its neighboring MBs. Based on the observation that direct mode is highly possible to be the optimal mode, mode complexity is always checked in advance whether it is below a predefined threshold for providing an efficient early termination opportunity. If this early termination condition is not met, three mode types for the MBs are classified according to the value of mode complexity, i.e., simple mode, medium mode and complex mode, to speed up the encoding process by reducing the number of the variable block modes required to be checked. Furthermore, for simple and medium mode region, the rate distortion(RD) cost of mode 16×16 in the temporal prediction direction is compared with that of the disparity prediction direction, to determine in advance whether the optimal prediction direction is in the temporal prediction direction or not, for skipping unnecessary disparity estimation. Experimental results show that the proposed method is able to significantly reduce the computational load by 78.79% and the total bit rate by 0.07% on average, while only incurring a negligible loss of PSNR(about 0.04 d B on average), compared with the full mode decision(FMD) in the reference software of MVC.
文摘To solve the problems of the AMR-WB+(Extended Adaptive Multi-Rate-WideBand) semi-open-loop coding mode selection algorithm,features for ACELP(Algebraic Code Excited Linear Prediction) and TCX(Transform Coded eXcitation) classification are investigated.11 classifying features in the AMR-WB+ codec are selected and 2 novel classifying features,i.e.,EFM(Energy Flatness Measurement) and stdEFM(standard deviation of EFM),are proposed.Consequently,a novel semi-open-loop mode selection algorithm based on EFM and selected AMR-WB+ features is proposed.The results of classifying test and listening test show that the performance of the novel algorithm is much better than that of the AMR-WB+ semi-open-loop coding mode selection algorithm.
文摘Design of video encoders involves implementation of fast mode decision(FMD) algorithm to reduce computation complexity while maintaining the performance of the coding. Although H.264/scalable video coding(SVC) achieves high scalability and coding efficiency, it also has high complexity in implementing its exhaustive computation. In this paper, a novel algorithm is proposed to reduce the redundant candidate modes by making use of the correlation among layers. A desired mode list is created based on the probability to be the best mode for each block in base layer and a candidate mode selection in the enhancement layer by the correlations of modes among reference frame and current frame. Our algorithm is implemented in joint scalable video model(JSVM)9.19.15 reference software and the performance is evaluated based on the average encoding time, peak signal to noise ration(PSNR)and bit rate. The experimental results show 41.89% improvement in encoding time with minimal loss of 0.02 dB in PSNR and 0.05%increase in bit rate.
基金National Natural Science Foundation of China (60372018)
文摘In order to reduce the encoding complexity of macroblock coding mode decision in H.264/AVC, a selective smaller block-size searching algorithm and a selective intra coding mode searching algorithm are proposed by using the high correlation among coding modes and in spatial and temporal domains of video sequence. Simulation results demonstrate that the proposed algorithm can provide significant improvement in computational requirement, with negligible small picture quality degradation and slight bit rate increase.
基金supported by the Natural Science Foundation of Shanghai Municipality(Grant No.09ZR1412500)the Shanghai Rising-Star Program(Grant No.11QA1402400)+1 种基金the National Natural Science Foundation of China(Grant Nos.60832003and60902085)the Key Laboratory of Advanced Display and System Applications(Shanghai University),Ministry of Education,China(Grant No.P200801)
文摘Variable size motion estimation （ME） and disparity estimation （DE） are employed to select the best coding mode for each macroblock （MB） in the current joint multiview video model （JMVM）. This technique achieves the highest possible coding efficiency, but it results in extremely large computation complexity which obstructs the multiview video coding （MVC） from practical application. This paper proposes an adaptive early termination of fast mode decision algorithm for MVC. It makes use of the coding information of the corresponding MBs in neighbor view based on inter-view correlation to early terminate the mode decision procedure. Experimental results show that the proposed fast mode decision algorithm can achieve computational 50% computation saving with no significant loss of rate distortion （RD） performance.
基金supported by the Natural Science Foundation of Shannxi Province(2017JQ5016)the Joint Laboratory for Sea Measurement and Control of Aircraft(DOM2016OF011)
文摘The complex systems are often in the structure of multi-operating modes, and the components implementing system functions are different under different operation modes, which results in the problems that components often fail in different operating modes, faults can be only detected in specified operating modes, tests can be available in specified operating modes,and the cost and efficiency of detecting and isolating faults are different under different operating modes and isolation levels. Aiming at these problems, an optimal test selection method for fault detection and isolation in the multi-operating mode system is proposed by using the fault pair coding and rollout algorithm. Firstly,the faults in fault-test correlation matrices under different operating modes are combined to fault-pairs, which is used to construct the fault pair-test correlation matrices under different operating modes.Secondly, the final fault pair-test correlation matrix of the multioperating mode system is obtained by operating the fault pair-test correlation matrices under different operating modes. Based on the final fault pair-test correlation matrix, the necessary tests are selected by the rollout algorithm orderly. Finally, the effectiveness of the proposed method is verified by examples of the optimal test selection in the multi-operating mode system with faults isolated to different levels. The result shows that the proposed method can effectively mine the fault detection and isolation ability of tests and it is suitable for the optimal test selection of the multi-operating mode system with faults isolated to the replacement unit and specific fault.
基金supported by the National Magnetic Confinement Fusion Science Program of China(Nos.2013GB101001,2014DFG61950 and2013GB112003)National Natural Science Foundation of China(Nos.11175211 and 11275233)
文摘This paper describes the fishbone mode phenomena during the injection of highpower neutral beams in EAST（Experimental Advanced Superconducting Tokamak）.The features of the fishbone mode are presented.The change in frequency of the mode during a fishbone burst is from 1 kHz to 6 kHz.The nonlinear behavior of the fishbone mode is analyzed by using a prey-predator model,which is consistent with the experimental results.This model indicates that the periodic oscillations of the fishbone mode always occur near the critical value of fast ion beta.Furthermore,the neutral beam analysis for the discharge is done by using the NUBEAM module of the TRANSP code.According to the numerical simulation results and theoretical calculation,it can be concluded that the fishbone mode is driven by the deeply trapped energetic beam ions in EAST.
文摘H.264 video coding standard introduces motion estimation with multiple block sizes to achieve a considerably higher coding efficiency than other video coding algorithms. However, this comes at the greatly increased computing complexity at the encoder. In this paper, a method is proposed to eliminate some redundant coding modes that contribute very little coding gain. The simulation results show that the algorithm can remarkably decrease the complexity at the encoder while keeping satisfying coding efficiency.
基金Sponsored by the Fundamental Research Funds for the Central Universities(Grant No. HEUCF11805)
文摘To decrease the computational complexity of adaptive inter-layer prediction and improve the encoding efficiency in sealable video coding, a mode decision algorithm is proposed by exploiting the part of used candidate modes of the co-located reference macrobloeks for Hierarchical-B pictures. This scheme reduces the amount of the candidate modes to generate a dynamic list for the current encoding macroblock according to the statistical information derived from the co-located reference macroblocks in different temporal levels. The experimental results show that this fast algorithm reduces approximately 31% encoding time on average with the negligible loss of encoding performance.
文摘In this paper, we will try to find a universal theoretical model and approximate solutions which can be applied to both mode shape and normal shape actuators and sensors, and which can be predicted the gain of the first three modes of the mode shape and normal shape actuators and sensors, finally through computer simulation analysis to validate. In order to prove the feasibility of the theory and as well as convenient to use on the electro-mechanical engineering, we will try to simplify the three-dimension structure problem into an one-dimension structure problem. Furthermore we will design one kind of bimorph type piezoelectric cantilever beam, so that it can be used as with the actuator and sensor simultaneously, but also conducive to the theory and simulation analysis. As for the simulation analysis, we will use the ANSYS code.
基金supported by U.S.Department of Energy(DOE) SciDAC GSEP Center and National Special Research Program of China for ITER
文摘In the present paper,we first derive the eigenmode equation of the ideal ballooning mode in tokamak plasmas using a gyrokinetic equation.It is shown that the gyrokinetic eigenmode equation can be reduced to the magnetohydrodynamic（MHD） form in the long wavelength limit when kinetic effects are ignored.Then,the global gyrokinetic toroidal code（GTC） is applied for simulations of the edge-localized ideal ballooning modes.The obtained mode structures are compared with the results of ideal MHD simulations.The observed scaling of the linear growth rate with the toroidal mode number is consistent with the ideal MHD theory.The simulation results verify the GTC capability of simulating MHD processes in toroidal plasmas.
文摘高效视频编码(high efficiency video coding,HEVC)相较于上一代编码标准H.264降低了约50%的比特率,但为了提高帧内预测的准确性,HEVC提出的35种预测模式导致计算量大幅增加,对软件和硬件实现均构成了挑战.针对该问题,在HEVC的基础上提出了一种依据图片纹理方向,结合预测模式之间的关联性来确定帧内预测模式的快速算法.实验结果表明,本算法与HEVC参考软件HM16.20相比,在BD-Rate损失仅为5.79%的情况下,节省46%以上的编码时间,显著降低了帧内预测模式决策的复杂度,便于在嵌入式系统等硬件资源有限的端侧实现算法落地.
