To optimize secondary air nozzle structure in purifying burner,this study focused on the comparison of purification,combustion and NO_(x)emission characteristics of pulverized coal preheated by a 30 kW purifying burne...To optimize secondary air nozzle structure in purifying burner,this study focused on the comparison of purification,combustion and NO_(x)emission characteristics of pulverized coal preheated by a 30 kW purifying burner with coaxial and centrosymmetric structures.Centrosymmetric structure shifted the position of main burning region down in high-temperature reduction unit(HTRU),and the number of branches differently influenced the temperature in different regions with this structure.For reductive gas components,CO concentration with centrosymmetric structure was higher compared to coaxial structure,while the differences in H_(2)and CH_(4)concentrations were smaller.Centrosymmetric structure was more disadvantageous to improve physicochemical properties of pulverized coal compared to coaxial structure,and this structure with four branches further deteriorated its properties compared to two branches.In mild combustion unit(MCU),the temperature at top was lower with centrosymmetric structure,while was higher in the rest.Centrosymmetric structure more effectively reduced NO_(x)emission compared to coaxial structure,but with slight sacrifice of combustion efficiency(η).Moreover,both two-branch and four-branch centrosymmetric structures realized ultra-low NO_(x)emission(<50 mg·m^(-3))with high η of over 98.50%,and the former was more advantageous.With this optimal structure,η and NO_(x)emission were 99.25%and 40.42 mg·m^(-3).展开更多
This paper studies three types of coaxial slow wave structures （SWSs）： （1） with ripples on both the inner and outer conductors; （2） with ripples on the outer conductor and smooth on the inner one; and （3） wit...This paper studies three types of coaxial slow wave structures （SWSs）： （1） with ripples on both the inner and outer conductors; （2） with ripples on the outer conductor and smooth on the inner one; and （3） with ripples on the inner conductor and smooth on the outer one. The frequencies, coupling impedances, time growth rates and beam-wave interaction efficiencies of the three types of coaxial SWSs are obtained by theoretical analysis. Moreover, the relativistic Ccrenkov generators （RCGs） with the three types of coaxial SWSs are simulated with a fully electromagnetic particle- in-cell code, and the results verify the theoretical analysis. It is proved that the RCG with double-rippled coaxial SWS has the highest conversion efficiency and the shortest starting time.展开更多
Tin dioxide(SnO_(2))with a high theoretical specific capacity of 1494 mAh g^(-1)is a promising candidate anode material for lithium storage.However,the shortcomings of serious volume expansion and low conductivity lim...Tin dioxide(SnO_(2))with a high theoretical specific capacity of 1494 mAh g^(-1)is a promising candidate anode material for lithium storage.However,the shortcomings of serious volume expansion and low conductivity limit its wide application.Herein,coaxial nano-multilayered C/SnO_(2)/TiO_(2)composites were fabricated via layerby-layer self-assembly of TiO_(2)and SnO_(2)-gel layers on the natural cellulose filter paper,followed by thermal treatment under a nitrogen atmosphere.Through engineering design of the assembly process,the optimal C/SinO_(2)/TiO_(2)composite features five alternating SnO_(2)and TiO_(2)nanolayers,with TiO_(2)as the outside shell(denoted as C/TSTST).This unique structure endows the C/TSTST with excellent structural stability and electrochemical kinetics,making it a high-performance anode for lithium-ion batteries(LIBs).The C/TSTST composite delivers a high reversible capacity of 676 mAh g^(-1)at 0.1 A g^(-1)after 200 cycles and retains a capacity of 504 mAh g^(-1)at 1.0 A g^(-1),which can be recovered to 781 mAh g^(-1)at 0.1 A g^(-1)The significantly enhanced electrochemical performance is attributed to the hierarchical hybrid structure,where the carbon core combined with coaxial TiO_(2)nanolayers serves as a structural scaffold,ameliorating volume change of SnO_(2)while creating abundant interfacial defects for enhanced lithium storage and rapid charge transport.These findings are further demonstrated by the density functional theory(DFT)calculations.This work provides an efficient strategy for designing coaxial nano-multilayered transition metal oxide-related electrode materials,offering new insights into high-performance LIBs anodes.展开更多
Zinc-ion hybrid fiber supercapacitors(FSCs)are promising energy storages for wearable electronics owing to their high energy density,good flexibility,and weavability.However,it is still a critical challenge to optimiz...Zinc-ion hybrid fiber supercapacitors(FSCs)are promising energy storages for wearable electronics owing to their high energy density,good flexibility,and weavability.However,it is still a critical challenge to optimize the structure of the designed FSC to improve energy density and realize the continuous fabrication of super-long FSCs.Herein,we propose a braided coaxial zinc-ion hybrid FSC with several meters of Ti_(3)C_(2)T_x MXene cathode as core electrodes,and shell zinc fiber anode was braided on the surface of the Ti_(3)C_(2)T_x MXene fibers across the solid electrolytes.According to the simulated results using ANSYS Maxwell software,the braided structures revealed a higher capacitance compared to the spring-like structures.The resulting FSCs exhibited a high areal capacitance of 214 mF cm^(-2),the energy density of 42.8μWh cm^(-2)at 5 mV s^(-1),and excellent cycling stability with 83.58%capacity retention after 5000 cycles.The coaxial FSC was tied several kinds of knots,proving a shape-controllable fiber energy storage.Furthermore,the knitted FSC showed superior stability and weavability,which can be woven into watch belts or embedded into textiles to power smart watches and LED arrays for a few days.展开更多
While manganese-based cathodes have been intensively studied for zinc-ion batteries(ZIBs),the limited rate capability and cycle life have always been a difficult problem to be solved.Here,we report a mixed valent mang...While manganese-based cathodes have been intensively studied for zinc-ion batteries(ZIBs),the limited rate capability and cycle life have always been a difficult problem to be solved.Here,we report a mixed valent manganese oxide(MnOx)cathode with superior electrochemical performance,which exhibits a high specific capacity of 450 mA h/g at 0.2 C and a satisfactory specific capacity of 158.3 mA h/g at a high rate of 5 C.The mixed cathode system reduces the charge transfer resistance,and show good surface stability and adsorption properties,so it is beneficial for the storage of Zn^(2+).Meanwhile,coaxial fiber ZIBs(CFZIBs)with splendid flexibility are assembled utilizing the elaborately prepared cathode material.The CFZIBs achieve a reversible capacity of 255.8 m A h/g and the capacity retention rate is as high as 80%after 1000 bending deformations.This study provides new opportunities for designing ZIBs with high performance and high flexibility.展开更多
To probe the coupling effect of the electron and Li ion conductivities in Ni-rich layered materials(LiNi0.8Co0.15Al0.05O2,NCA),lithium lanthanum titanate(LLTO)nanofiber and carbon-coated LLTO fiber(LLTO@C)materials we...To probe the coupling effect of the electron and Li ion conductivities in Ni-rich layered materials(LiNi0.8Co0.15Al0.05O2,NCA),lithium lanthanum titanate(LLTO)nanofiber and carbon-coated LLTO fiber(LLTO@C)materials were introduced to polyvinylidene difluoride in a cathode.The enhancement of the conductivity was indicated by the suppressed impedance and polarization.At 1 and 5 C,the cathodes with coupling conductive paths had a more stable cycling performance.The coupling mechanism was analyzed based on the chemical state and structure evolution of NCA after cycling for 200 cycles at 5 C.In the pristine cathode,the propagation of lattice damaged regions,which consist of high-density edge-dislocation walls,destroyed the bulk integrity of NCA.In addition,the formation of a rock-salt phase on the surface of NCA caused a capacity loss.In contrast,in the LLTO@C modified cathode,although the formation of dislocation-driven atomic lattice broken regions and cation mixing occurred,they were limited to a scale of several atoms,which retarded the generation of the rock-salt phase and resulted in a pre-eminent capacity retention.Only NiO phase“pitting”occurred.A mechanism based on the synergistic transport of Li ions and electrons was proposed.展开更多
Fiber strain sensors with robust sensing performance are indispensable for human-machine interactions in the electronic textiles.However,current fiber strain sensors are confronted with the challenges of unavoidable d...Fiber strain sensors with robust sensing performance are indispensable for human-machine interactions in the electronic textiles.However,current fiber strain sensors are confronted with the challenges of unavoidable deterioration of functional sensing components during wearable and extreme environments,resulting in unsatisfactory stability and durability.Here,we present a robust fiber strain sensor based on the mutual inductance effect.The sensor is assembled by designing coaxial helical coils around an elastic polyurethane fiber.When stretching the fiber sensor,the strain is detected by recording the voltage changes in the helical coils due to the variation in magnetic flux.The resultant fiber strain sensor shows high linearity(with a linear regression coefficient of 0.99)at a large strain of 100%,and can withstand various extreme environmental conditions,such as high/low temperatures(from-30℃to 160℃),and severe deformations,such as twisting and pressing(with a pressure of 500 N/cm).The long-term cyclic stability of our fiber strain sensor(100,000 cycles at a strain of 100%)is superior to that of most reported flexible resistive and capacitive strain sensors.Finally,the mass-produced fiber strain sensors are woven into a smart textile system to accurately capture gestures.展开更多
Fiber organic electrochemical transistors(OECTs)have received extensive attention in wearable and implantable biosensors because of their high flexibility and low working voltage.However,the transconductance of fiber ...Fiber organic electrochemical transistors(OECTs)have received extensive attention in wearable and implantable biosensors because of their high flexibility and low working voltage.However,the transconductance of fiber OECTs is much lower compared with the planar counterparts,leading to low sensitivity.Here,we developed fiber OECTs in a coaxial configuration with microscale channel length to achieve the highest transconductance of 135 mS,which is one to two orders of magnitude higher than that of the state-of-the-art fiber OECTs.Coaxial fiber OECT based sensors showed high sensitivities of 12.78,20.53 and 3.78 mA/decade to ascorbic acid,hydrogen peroxide and glucose,respectively.These fiber OECTs were woven into a fabric to monitor the glucose in sweat during exercise and implanted in mouse brain to detect ascorbic acid.This coaxial architectural design offers an effective way to promote the performance of fiber OECTs and realize highly sensitive detection of biochemicals.展开更多
The development of materials with unique nanostructures is an effective strategy for the improvement of sodium storage in sodium ion batteries to achieve stable cycling performance and good rate capability. In this wo...The development of materials with unique nanostructures is an effective strategy for the improvement of sodium storage in sodium ion batteries to achieve stable cycling performance and good rate capability. In this work, SnSb- core/carbon-shell nanocables directly anchored on graphene sheets （GS） were synthesized by the hydrothermal technique and chemical vapor deposition. The simultaneous carbon coating and the encapsulation of SnSb alloy is effective for alleviating the volume-change problem in sodium ion batteries. After optimizing the electrolyte for SnSb in the sodium ion batteries, the optimized coaxial SnSb/carbon nanocable/GS （SnSb/CNT@GS） nanostructure demonstrated stable cycling capability and rate performance in 1 M NaClO4 with propylene carbonate （PC） ＋ 5% fluoroethylene carbonate （FEC）. The SnSb/CNT@GS electrode can retain a capacity of 360 mAh/g for up to 100 cycles, which is 71% of the theoretical capacity. This is higher than in the other three electrolytes tested （1 M NaClO4 in PC, 1 M NaC104 in PC/FEC （1：1 v/v） and 1 M NaPF6 ＋ PC）, and higher than that of the sample without the addition of graphene. The good electrochemical performance can be attributed to the efficient buffering provided by the outer carbon nanocable layer and the graphene inhibiting the agglomeration of SnSb particles, as well as its high conductivity.展开更多
Extensive attention has been drawn to the development of carbon-matrix composites for application in the aerospace and military industry,where a combination of high mechanical strength and excellent frictional propert...Extensive attention has been drawn to the development of carbon-matrix composites for application in the aerospace and military industry,where a combination of high mechanical strength and excellent frictional properties are required.Herein,carbon-matrix composites reinforced by Si_(3)N_(4)nanowires@pyrolytic carbon nanolayers(Si_(3)N_(4nws)@PyCnls)coupled with hydroxyapatite nanosheets is reported.The Si_(3)N_(4nws)@PyCnls(SP)with coaxial structure could increase the surface roughness of Si_(3)N_(4nws)and promote the stress transfer to the carbon matrix,whereas the porous hydroxyapatite nanosheets favor the infiltration of the carbon matrix and promote the interfacial bonding between the SP and carbon matrix.The carbon matrix composites reinforced by SP coupled with hydroxyapatite nanosheets(Si_(3)N_(4nws)@PyCnls-HA-C)exhibit excellent mechanical strength.Compare with the conventional Si_(3)N_(4nws)reinforced carbon composites,Si_(3)N_(4nws)@PyCnls-HA-C(SPHC)have 162%and 249%improvement in flexural strength and elastic modulus,respectively.Moreover,the friction coefficient and wear rate decreased by 53%and 23%,respectively.This study provides a co-reinforcement strategy generated by SP coupled with hydroxyapatite nanosheets for effective improvement of mechanical and frictional properties of carbon matrix composites that are used for aerospace and military industry applications.展开更多
基金Postdoctoral Fellowship Program of CPSF(GZC20232672)CAS Project for Young Scientists in Basic Research(YSBR-028)the Strategic Priority Research Program(XDA29010200)are gratefully acknowledged.
文摘To optimize secondary air nozzle structure in purifying burner,this study focused on the comparison of purification,combustion and NO_(x)emission characteristics of pulverized coal preheated by a 30 kW purifying burner with coaxial and centrosymmetric structures.Centrosymmetric structure shifted the position of main burning region down in high-temperature reduction unit(HTRU),and the number of branches differently influenced the temperature in different regions with this structure.For reductive gas components,CO concentration with centrosymmetric structure was higher compared to coaxial structure,while the differences in H_(2)and CH_(4)concentrations were smaller.Centrosymmetric structure was more disadvantageous to improve physicochemical properties of pulverized coal compared to coaxial structure,and this structure with four branches further deteriorated its properties compared to two branches.In mild combustion unit(MCU),the temperature at top was lower with centrosymmetric structure,while was higher in the rest.Centrosymmetric structure more effectively reduced NO_(x)emission compared to coaxial structure,but with slight sacrifice of combustion efficiency(η).Moreover,both two-branch and four-branch centrosymmetric structures realized ultra-low NO_(x)emission(<50 mg·m^(-3))with high η of over 98.50%,and the former was more advantageous.With this optimal structure,η and NO_(x)emission were 99.25%and 40.42 mg·m^(-3).
文摘This paper studies three types of coaxial slow wave structures （SWSs）： （1） with ripples on both the inner and outer conductors; （2） with ripples on the outer conductor and smooth on the inner one; and （3） with ripples on the inner conductor and smooth on the outer one. The frequencies, coupling impedances, time growth rates and beam-wave interaction efficiencies of the three types of coaxial SWSs are obtained by theoretical analysis. Moreover, the relativistic Ccrenkov generators （RCGs） with the three types of coaxial SWSs are simulated with a fully electromagnetic particle- in-cell code, and the results verify the theoretical analysis. It is proved that the RCG with double-rippled coaxial SWS has the highest conversion efficiency and the shortest starting time.
基金financially supported by the National Natural Science Foundation of China(Nos.22302133 and 22405161)Central Guidance on Local Science and Technology Development Fund of Hebei Province,China(No.236Z4406G)+5 种基金the Natural Science Foundation of Hebei Education Department,China(No.BJ2025100)the Natural Science Foundation of Hebei Province,China(No.B2021210001)the Natural Science Foundation of Xinjiang Uygur Autonomous Region(No.2024D01A157)the Key R&D Plan of Karamay(No.2024zdyf0009)Karamay Innovation Environment Construction Plan(Innovative Talents)Project(No.2024hjcxrc0029)the Research Foundation of China University of Petroleum-Beijing at Karamay(No.XQZX20240023)
文摘Tin dioxide(SnO_(2))with a high theoretical specific capacity of 1494 mAh g^(-1)is a promising candidate anode material for lithium storage.However,the shortcomings of serious volume expansion and low conductivity limit its wide application.Herein,coaxial nano-multilayered C/SnO_(2)/TiO_(2)composites were fabricated via layerby-layer self-assembly of TiO_(2)and SnO_(2)-gel layers on the natural cellulose filter paper,followed by thermal treatment under a nitrogen atmosphere.Through engineering design of the assembly process,the optimal C/SinO_(2)/TiO_(2)composite features five alternating SnO_(2)and TiO_(2)nanolayers,with TiO_(2)as the outside shell(denoted as C/TSTST).This unique structure endows the C/TSTST with excellent structural stability and electrochemical kinetics,making it a high-performance anode for lithium-ion batteries(LIBs).The C/TSTST composite delivers a high reversible capacity of 676 mAh g^(-1)at 0.1 A g^(-1)after 200 cycles and retains a capacity of 504 mAh g^(-1)at 1.0 A g^(-1),which can be recovered to 781 mAh g^(-1)at 0.1 A g^(-1)The significantly enhanced electrochemical performance is attributed to the hierarchical hybrid structure,where the carbon core combined with coaxial TiO_(2)nanolayers serves as a structural scaffold,ameliorating volume change of SnO_(2)while creating abundant interfacial defects for enhanced lithium storage and rapid charge transport.These findings are further demonstrated by the density functional theory(DFT)calculations.This work provides an efficient strategy for designing coaxial nano-multilayered transition metal oxide-related electrode materials,offering new insights into high-performance LIBs anodes.
基金This work was supported by National Natural Science Foundation of China(51672308,51972025,61888102,62004187)Hebei Natural Science Foundation of Hebei(E2019208280).
文摘Zinc-ion hybrid fiber supercapacitors(FSCs)are promising energy storages for wearable electronics owing to their high energy density,good flexibility,and weavability.However,it is still a critical challenge to optimize the structure of the designed FSC to improve energy density and realize the continuous fabrication of super-long FSCs.Herein,we propose a braided coaxial zinc-ion hybrid FSC with several meters of Ti_(3)C_(2)T_x MXene cathode as core electrodes,and shell zinc fiber anode was braided on the surface of the Ti_(3)C_(2)T_x MXene fibers across the solid electrolytes.According to the simulated results using ANSYS Maxwell software,the braided structures revealed a higher capacitance compared to the spring-like structures.The resulting FSCs exhibited a high areal capacitance of 214 mF cm^(-2),the energy density of 42.8μWh cm^(-2)at 5 mV s^(-1),and excellent cycling stability with 83.58%capacity retention after 5000 cycles.The coaxial FSC was tied several kinds of knots,proving a shape-controllable fiber energy storage.Furthermore,the knitted FSC showed superior stability and weavability,which can be woven into watch belts or embedded into textiles to power smart watches and LED arrays for a few days.
基金National Natural Science Foundation of China with Grant No.21905304Natural Science Foundation of Shandong Province(No.ZR2019BEM031)+1 种基金the Fundamental Research Funds for the Central Universities(Nos.18CX02158A,05Y18030020 and 19CX05001A)the support from the Western University-Soochow University Center for Synchrotron Radiation Research。
文摘While manganese-based cathodes have been intensively studied for zinc-ion batteries(ZIBs),the limited rate capability and cycle life have always been a difficult problem to be solved.Here,we report a mixed valent manganese oxide(MnOx)cathode with superior electrochemical performance,which exhibits a high specific capacity of 450 mA h/g at 0.2 C and a satisfactory specific capacity of 158.3 mA h/g at a high rate of 5 C.The mixed cathode system reduces the charge transfer resistance,and show good surface stability and adsorption properties,so it is beneficial for the storage of Zn^(2+).Meanwhile,coaxial fiber ZIBs(CFZIBs)with splendid flexibility are assembled utilizing the elaborately prepared cathode material.The CFZIBs achieve a reversible capacity of 255.8 m A h/g and the capacity retention rate is as high as 80%after 1000 bending deformations.This study provides new opportunities for designing ZIBs with high performance and high flexibility.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.51571182 and 51001091)the Fundamental Research Program from the Ministry of Science and Technology of China(No.2014CB931704)the Program for Innovative Research Team(in Science and Technology)in University of Henan Province(No.21IRTSTHN003).This work was also partially supported by the Provincial Scientific Research Program of Henan(No.182102310815).
文摘To probe the coupling effect of the electron and Li ion conductivities in Ni-rich layered materials(LiNi0.8Co0.15Al0.05O2,NCA),lithium lanthanum titanate(LLTO)nanofiber and carbon-coated LLTO fiber(LLTO@C)materials were introduced to polyvinylidene difluoride in a cathode.The enhancement of the conductivity was indicated by the suppressed impedance and polarization.At 1 and 5 C,the cathodes with coupling conductive paths had a more stable cycling performance.The coupling mechanism was analyzed based on the chemical state and structure evolution of NCA after cycling for 200 cycles at 5 C.In the pristine cathode,the propagation of lattice damaged regions,which consist of high-density edge-dislocation walls,destroyed the bulk integrity of NCA.In addition,the formation of a rock-salt phase on the surface of NCA caused a capacity loss.In contrast,in the LLTO@C modified cathode,although the formation of dislocation-driven atomic lattice broken regions and cation mixing occurred,they were limited to a scale of several atoms,which retarded the generation of the rock-salt phase and resulted in a pre-eminent capacity retention.Only NiO phase“pitting”occurred.A mechanism based on the synergistic transport of Li ions and electrons was proposed.
基金financially by Ministry of Science and Technology of the People's Republic of China(2022YFA1203001,2022YFA1203002)National Natural Science Foundation of China(T2321003,22335003,T2222005,22175042)Science and Technology Commission of Shanghai Municipality(21511104900).
文摘Fiber strain sensors with robust sensing performance are indispensable for human-machine interactions in the electronic textiles.However,current fiber strain sensors are confronted with the challenges of unavoidable deterioration of functional sensing components during wearable and extreme environments,resulting in unsatisfactory stability and durability.Here,we present a robust fiber strain sensor based on the mutual inductance effect.The sensor is assembled by designing coaxial helical coils around an elastic polyurethane fiber.When stretching the fiber sensor,the strain is detected by recording the voltage changes in the helical coils due to the variation in magnetic flux.The resultant fiber strain sensor shows high linearity(with a linear regression coefficient of 0.99)at a large strain of 100%,and can withstand various extreme environmental conditions,such as high/low temperatures(from-30℃to 160℃),and severe deformations,such as twisting and pressing(with a pressure of 500 N/cm).The long-term cyclic stability of our fiber strain sensor(100,000 cycles at a strain of 100%)is superior to that of most reported flexible resistive and capacitive strain sensors.Finally,the mass-produced fiber strain sensors are woven into a smart textile system to accurately capture gestures.
基金supported by the National Natural Science Foundation of China(NSFC,Nos.52122310 and 22075050)Science and Technology Commission of Shanghai Municipality(STCSM,Nos.21511104900 and 20JC1414902)+2 种基金China Postdoctoral Science Foundation(CPSF,Nos.VLH1717003,KLH1717015)Shanghai Municipal Science and Technology Major Project(No.2018SHZDZX01)ZJ Lab,and Shanghai Center for Brain Science and Brain-Inspired Technology.
文摘Fiber organic electrochemical transistors(OECTs)have received extensive attention in wearable and implantable biosensors because of their high flexibility and low working voltage.However,the transconductance of fiber OECTs is much lower compared with the planar counterparts,leading to low sensitivity.Here,we developed fiber OECTs in a coaxial configuration with microscale channel length to achieve the highest transconductance of 135 mS,which is one to two orders of magnitude higher than that of the state-of-the-art fiber OECTs.Coaxial fiber OECT based sensors showed high sensitivities of 12.78,20.53 and 3.78 mA/decade to ascorbic acid,hydrogen peroxide and glucose,respectively.These fiber OECTs were woven into a fabric to monitor the glucose in sweat during exercise and implanted in mouse brain to detect ascorbic acid.This coaxial architectural design offers an effective way to promote the performance of fiber OECTs and realize highly sensitive detection of biochemicals.
文摘The development of materials with unique nanostructures is an effective strategy for the improvement of sodium storage in sodium ion batteries to achieve stable cycling performance and good rate capability. In this work, SnSb- core/carbon-shell nanocables directly anchored on graphene sheets （GS） were synthesized by the hydrothermal technique and chemical vapor deposition. The simultaneous carbon coating and the encapsulation of SnSb alloy is effective for alleviating the volume-change problem in sodium ion batteries. After optimizing the electrolyte for SnSb in the sodium ion batteries, the optimized coaxial SnSb/carbon nanocable/GS （SnSb/CNT@GS） nanostructure demonstrated stable cycling capability and rate performance in 1 M NaClO4 with propylene carbonate （PC） ＋ 5% fluoroethylene carbonate （FEC）. The SnSb/CNT@GS electrode can retain a capacity of 360 mAh/g for up to 100 cycles, which is 71% of the theoretical capacity. This is higher than in the other three electrolytes tested （1 M NaClO4 in PC, 1 M NaC104 in PC/FEC （1：1 v/v） and 1 M NaPF6 ＋ PC）, and higher than that of the sample without the addition of graphene. The good electrochemical performance can be attributed to the efficient buffering provided by the outer carbon nanocable layer and the graphene inhibiting the agglomeration of SnSb particles, as well as its high conductivity.
基金his work was supported by the National Natural Science Foundation of China under Grant Nos.51872232the Research Fund of the State Key Laboratory of Solidification Processing(NWPU),China(Grant No.136-QP-2015),the“111”project of China(B08040)+1 种基金the National Training Program of Innovation and Entrepreneurship for Undergraduates(Grand No.S202010699336)Project supported by the Joint Funds of the National Natural Science Foundation of China(Grant No.U21B2067).
文摘Extensive attention has been drawn to the development of carbon-matrix composites for application in the aerospace and military industry,where a combination of high mechanical strength and excellent frictional properties are required.Herein,carbon-matrix composites reinforced by Si_(3)N_(4)nanowires@pyrolytic carbon nanolayers(Si_(3)N_(4nws)@PyCnls)coupled with hydroxyapatite nanosheets is reported.The Si_(3)N_(4nws)@PyCnls(SP)with coaxial structure could increase the surface roughness of Si_(3)N_(4nws)and promote the stress transfer to the carbon matrix,whereas the porous hydroxyapatite nanosheets favor the infiltration of the carbon matrix and promote the interfacial bonding between the SP and carbon matrix.The carbon matrix composites reinforced by SP coupled with hydroxyapatite nanosheets(Si_(3)N_(4nws)@PyCnls-HA-C)exhibit excellent mechanical strength.Compare with the conventional Si_(3)N_(4nws)reinforced carbon composites,Si_(3)N_(4nws)@PyCnls-HA-C(SPHC)have 162%and 249%improvement in flexural strength and elastic modulus,respectively.Moreover,the friction coefficient and wear rate decreased by 53%and 23%,respectively.This study provides a co-reinforcement strategy generated by SP coupled with hydroxyapatite nanosheets for effective improvement of mechanical and frictional properties of carbon matrix composites that are used for aerospace and military industry applications.
