Ni-based coating,a kind of surface material,is characterized by high hardness,outstanding wear resistance,and excellent corrosion resistance.Ni-based coatings doped with hard phases can improve the coating quality.Thi...Ni-based coating,a kind of surface material,is characterized by high hardness,outstanding wear resistance,and excellent corrosion resistance.Ni-based coatings doped with hard phases can improve the coating quality.This is an important topic in related fields.Compared with traditional Ni-based coatings,Ni-based coatings doped with a hard phase have stronger competitive advantages.Among these,Ni-based diamond composite coatings have superior performance.Hence,it has become a kind of excellent functional coating.We outline the current state of research on Ni-based diamond composite coatings.Advances in seven preparation processes for Ni-based diamond composite coatings were discussed.These processes mainly include brazing,electrodeposition,sintering,laser cladding,plasma spraying,supersonic laser deposition,and vacuum cladding.The latest studies on the interfacial behavior,microstructure,and bond strength of these composite coatings are also summarized.The deficiencies for present Ni-based diamond composite coatings are pointed out.Meanwhile,the developmental directions of related fields are envisioned.That could provide theoretical guidance and reference information for research and technological development in the near future.展开更多
In this paper,acoustic emission（AE） and digital image correlation methods were applied to monitor interface cracking in thermal barrier coatings under compression.The interface failure process can be identifie via i...In this paper,acoustic emission（AE） and digital image correlation methods were applied to monitor interface cracking in thermal barrier coatings under compression.The interface failure process can be identifie via its AE features,including buckling,delamination incubation and spallation.According to the Fourier transformation of AE signals,there arefourdifferentfailuremodes：surfaceverticalcracks,opening and sliding interface cracks,and substrate deformation.The characteristic frequency of AE signals from surface vertical cracks is 0.21 MHz,whilst that of the two types of interface cracks are 0.43 and 0.29 MHz,respectively.The energy released of the two types of interface cracks are 0.43 and 0.29 MHz,respectively.Based on the energy released from cracking and the AE signals,a relationship is established between the interface crack length and AE parameters,which is in good agreement with experimental results.展开更多
A nanostructured ternary coating of Ti/（Ru ＋ Ti ＋ Ce）O2 was prepared by the conventional electrodeposition on the titanium substrate as the cathode with different numbers of coating layers. The main objective of t...A nanostructured ternary coating of Ti/（Ru ＋ Ti ＋ Ce）O2 was prepared by the conventional electrodeposition on the titanium substrate as the cathode with different numbers of coating layers. The main objective of this work was to study nanostructured coatings of ceramic materials. For this purpose, the amount of precursor materials in the electrolyte was a variable parameter. Furthermore, the salt of TiCl4/RuCl3·xH2 O/Ce（NO3）3·6 H2 O with different amounts, hydrogen peroxide, methanol, and distilled water were used as an aqueousunaqueous bath. In addition, the coated samples were put to heat at 300, 450, 650, and 850℃ in an electric furnace for1 h. The crystalline phase of the coating was characterized by X-ray diffraction（XRD）. The chemical composition and microstructure of the coating were studied using energydispersive spectroscopy（EDS） and scanning electron microscopy analysis（SEM）. Moreover, the electrochemical measurement of Ti/（Ru ＋ Ti ＋ Ce）O2 coatings was carried out. Results show that with the increase in the number of coating layers, the quality of morphology is improved.Then, the best quality of coatings is obtained at six layers on the titanium substrate with electrolyte including TiO2/RuO2/CeO2 with the molar ratio of 70：5：25 after heat treatment at 450 ℃ for 1 h. Besides,with the increase in Ce02 content from 5 wt% to 25 wt% and the number of coating layers, higher thickness of about（20.0±0.1） μm and minimum over potential for chlorine evolution were obtained.展开更多
The Al22Si/ZL102 bimetal was designed and prepared by extrusion at near-eutectic temperature.The properties and fracture behaviors of different surface treatments between oxide film and zinc coating were compared betw...The Al22Si/ZL102 bimetal was designed and prepared by extrusion at near-eutectic temperature.The properties and fracture behaviors of different surface treatments between oxide film and zinc coating were compared between the Al22 Si and ZL102 bimetal.The average bonding strength of bimetal with intermittent oxide film interface was about 89.3MPa,which is higher than that of the bimetal fabricated by zinc coating method（about 76.3MPa）.During the process of extrusion,the oxidation film was extruded to crush and the metal was extruded through the micro-cracks of the oxidation film,then the two surfaces were joined together.Altogether,the results showed that extrusion at near-eutectic temperature is favorable for achieving a high-quality metallurgical bonded interface.展开更多
A promising solid-state coating mechanism based on the cold spray technique provides highly advantageous conditions on thermal-sensitive magnesium alloys.To study the effect of heat balance in cold spray coating on mi...A promising solid-state coating mechanism based on the cold spray technique provides highly advantageous conditions on thermal-sensitive magnesium alloys.To study the effect of heat balance in cold spray coating on microstructure,experiments were designed to successfully coat AA7075 on AZ31B with two different heat balance conditions to yield a coated sample with tensile residual stress and a sample with compressive residual stress in both coating and substrate.The effects of coating temperature on the microstructure of magnesium alloy and the interfaces of coated samples were then analyzed by SEM,EBSD,TEM in high-and low-heat input coating conditions.The interface of the AA7075 coating and magnesium alloy substrate under both conditions consists of a narrow-band layer with very fine grains,followed by columnar grains of magnesium that have grown perpendicular to the interface.At higher temperatures,this layer became wider.No intermetallic phase was detected at the interface under either condition.It is shown that the microstructure of the substrate was affected by coating temperature,leading to stress relief,dynamic recrystallization and even dynamic grain growth of magnesium under high temperature.Reducing the heat input and increasing the heat transfer decreased microstructural changes in the substrate.展开更多
基金financially supported by the National Program of Foreign Experts of China(G2023026003L)the National Natural Science Foundation of China(52475347,52071165,51705151)+4 种基金China Postdoctoral Fund(2023M740475)sponsored by the Program for Science&Technology Innovation Talents in Universities of Henan Province,China(22HASTIT026)International Science and Technology Cooperation Project of Henan Province(242102521057),Chinasupported by the Program for the Top Young Talents of Henan Province,ChinaFrontier Exploration Project of Longmen Laboratory(LMQYTSKT016),China.
文摘Ni-based coating,a kind of surface material,is characterized by high hardness,outstanding wear resistance,and excellent corrosion resistance.Ni-based coatings doped with hard phases can improve the coating quality.This is an important topic in related fields.Compared with traditional Ni-based coatings,Ni-based coatings doped with a hard phase have stronger competitive advantages.Among these,Ni-based diamond composite coatings have superior performance.Hence,it has become a kind of excellent functional coating.We outline the current state of research on Ni-based diamond composite coatings.Advances in seven preparation processes for Ni-based diamond composite coatings were discussed.These processes mainly include brazing,electrodeposition,sintering,laser cladding,plasma spraying,supersonic laser deposition,and vacuum cladding.The latest studies on the interfacial behavior,microstructure,and bond strength of these composite coatings are also summarized.The deficiencies for present Ni-based diamond composite coatings are pointed out.Meanwhile,the developmental directions of related fields are envisioned.That could provide theoretical guidance and reference information for research and technological development in the near future.
基金supported by the National Natural Science Foundation of China (Grants 11472237,11002122,51172192,and 11272275)
文摘In this paper,acoustic emission（AE） and digital image correlation methods were applied to monitor interface cracking in thermal barrier coatings under compression.The interface failure process can be identifie via its AE features,including buckling,delamination incubation and spallation.According to the Fourier transformation of AE signals,there arefourdifferentfailuremodes：surfaceverticalcracks,opening and sliding interface cracks,and substrate deformation.The characteristic frequency of AE signals from surface vertical cracks is 0.21 MHz,whilst that of the two types of interface cracks are 0.43 and 0.29 MHz,respectively.The energy released of the two types of interface cracks are 0.43 and 0.29 MHz,respectively.Based on the energy released from cracking and the AE signals,a relationship is established between the interface crack length and AE parameters,which is in good agreement with experimental results.
基金financially supported by the Semnan University Foundation of Iran
文摘A nanostructured ternary coating of Ti/（Ru ＋ Ti ＋ Ce）O2 was prepared by the conventional electrodeposition on the titanium substrate as the cathode with different numbers of coating layers. The main objective of this work was to study nanostructured coatings of ceramic materials. For this purpose, the amount of precursor materials in the electrolyte was a variable parameter. Furthermore, the salt of TiCl4/RuCl3·xH2 O/Ce（NO3）3·6 H2 O with different amounts, hydrogen peroxide, methanol, and distilled water were used as an aqueousunaqueous bath. In addition, the coated samples were put to heat at 300, 450, 650, and 850℃ in an electric furnace for1 h. The crystalline phase of the coating was characterized by X-ray diffraction（XRD）. The chemical composition and microstructure of the coating were studied using energydispersive spectroscopy（EDS） and scanning electron microscopy analysis（SEM）. Moreover, the electrochemical measurement of Ti/（Ru ＋ Ti ＋ Ce）O2 coatings was carried out. Results show that with the increase in the number of coating layers, the quality of morphology is improved.Then, the best quality of coatings is obtained at six layers on the titanium substrate with electrolyte including TiO2/RuO2/CeO2 with the molar ratio of 70：5：25 after heat treatment at 450 ℃ for 1 h. Besides,with the increase in Ce02 content from 5 wt% to 25 wt% and the number of coating layers, higher thickness of about（20.0±0.1） μm and minimum over potential for chlorine evolution were obtained.
文摘The Al22Si/ZL102 bimetal was designed and prepared by extrusion at near-eutectic temperature.The properties and fracture behaviors of different surface treatments between oxide film and zinc coating were compared between the Al22 Si and ZL102 bimetal.The average bonding strength of bimetal with intermittent oxide film interface was about 89.3MPa,which is higher than that of the bimetal fabricated by zinc coating method（about 76.3MPa）.During the process of extrusion,the oxidation film was extruded to crush and the metal was extruded through the micro-cracks of the oxidation film,then the two surfaces were joined together.Altogether,the results showed that extrusion at near-eutectic temperature is favorable for achieving a high-quality metallurgical bonded interface.
基金The financial support of the Natural Sciences and Engineering Research Council of Canada(NSERC)through the Automotive Partnership Canada(APC)under APCPJ 459269-13 grant with contributions from Multimatic Technical centre,Ford Motor CompanyCenterline Windsor are acknowledged.Funds from NSERC-RTI program under EQPEQ458441-2014 grant also supported this research.
文摘A promising solid-state coating mechanism based on the cold spray technique provides highly advantageous conditions on thermal-sensitive magnesium alloys.To study the effect of heat balance in cold spray coating on microstructure,experiments were designed to successfully coat AA7075 on AZ31B with two different heat balance conditions to yield a coated sample with tensile residual stress and a sample with compressive residual stress in both coating and substrate.The effects of coating temperature on the microstructure of magnesium alloy and the interfaces of coated samples were then analyzed by SEM,EBSD,TEM in high-and low-heat input coating conditions.The interface of the AA7075 coating and magnesium alloy substrate under both conditions consists of a narrow-band layer with very fine grains,followed by columnar grains of magnesium that have grown perpendicular to the interface.At higher temperatures,this layer became wider.No intermetallic phase was detected at the interface under either condition.It is shown that the microstructure of the substrate was affected by coating temperature,leading to stress relief,dynamic recrystallization and even dynamic grain growth of magnesium under high temperature.Reducing the heat input and increasing the heat transfer decreased microstructural changes in the substrate.
