Phosphorus tends to migrate into metallic iron during the direct reduction of high-phosphorus oolitic iron ore,leading to undesirable phosphorus enrichment in metallic iron.However,the underlying reduction and migrati...Phosphorus tends to migrate into metallic iron during the direct reduction of high-phosphorus oolitic iron ore,leading to undesirable phosphorus enrichment in metallic iron.However,the underlying reduction and migration mechanisms remain poorly understood.Phosphorus behavior during coal-based reduction was systematically investigated through theoretical modeling and experimental approaches.Thermodynamic analysis revealed that the carbon reduction of solid Ca_(3)(PO_(4))_(2)to gaseous P_(2)requires temperatures exceeding 1400℃.Notably,this threshold significantly decreases to 1130.5℃in the presence of SiO_(2)and Al_(2)O_(3).Further investigations demonstrated that Ca_(3)(PO_(4))_(2)co-reduces with Fe_(x)O_(γ)in the presence of SiO_(2)-Al_(2)O_(3)-Fe_(x)O_(γ),forming Fe_(3)P(instead of gaseous P_(2))at a markedly lower temperature of 778.7℃.Mechanistic studies indicate that the inherent thermal stability of Ca_(3)(PO_(4))_(2)inhibits the generation of reactive[P_(2)O_(5)].However,SiO_(2)-Al_(2)O_(3)coexistence destabilizes Ca_(3)(PO_(4))_(2)while exponentially enhancing[P_(2)O_(5)]activity.This synergistic effect dramatically promotes the phosphorus mineral reduction.Characterization confirmed that Ca_(3)(PO_(4))_(2)migrated into the slag phase(4FeO·Al_(2)O_(3)·3SiO_(2)·CaO·P_(2)O_(5)).Subsequently,the reactive P_(2)O_(5)in slag is reduced with metallic iron to form Fe_(3)P,which further dissolves into theα-Fe matrix through solid-state diffusion,ultimately generating Fe-P solid solutions.展开更多
一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家...一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家赫拉克利特所说的“万物流转”,又说“你不能两次踏进同一条河流,因为新的水不断地流过你的身旁”,他所表达的意思是“世界上唯一不变的就是变化”。展开更多
A process of purification of coal-based coke powder as anode the treatment of coke powder with dilute hydrofluoric acid solution, for Li-ion batteries was attempted. The process started with followed by united-acid-le...A process of purification of coal-based coke powder as anode the treatment of coke powder with dilute hydrofluoric acid solution, for Li-ion batteries was attempted. The process started with followed by united-acid-leaching using sulfuric acid and hydrochloric acid. The effects of altering the hydrofluoric acid addition, hydrofluoric acid concentration, contact time, temperature and acid type were investigated. A minimum ash content of 0.35% was obtained when proper conditions were applied. The electrochemical performance of purified coke powder shows greatly improved electrochemical performance. The as-purified coke powder presented an initial reversible capacity of 257.4 mAh/g and a retention rate of 95% after 50 cycles. The proposed purification process paves a way to prepare a promising anode material with good performance with low cost of coke powder for Li-ion batteries.展开更多
Coal-based soild wastes(CBSWs)are industrial byproducts that can be harmful to the environment.The exploitation and utilization of CBsWs offer societal advantages such as resource conservation,pollution reduction,and ...Coal-based soild wastes(CBSWs)are industrial byproducts that can be harmful to the environment.The exploitation and utilization of CBsWs offer societal advantages such as resource conservation,pollution reduction,and cost-effective production.However,environmentally sustainable management remains a worldwide challenge due to the substantial production volume and limited disposal capacity of CBSWs.The physicochemical properties and utilization of CBSWs are summarized,including fly ash,coal gangue and coal gasification slag.It also presents the current global applications status of CBSWs resources and examines market supply and demand.Subsequently,the paper provides an overview of studies on ways to utilise CBSWs,highlighting the primary avenues of CBSWs resource utilization which are mainly from the fields of chemical materials,metallurgy and agriculture.Furthermore,a comparative evaluation of the various methods for CBSWs resource recovery is conducted,outlining their respective advantages and disadvantages.The future development of CBSWs recycling processes is also discussed.The review concludes that while there is a growing need for attention in CBSWs recycling,its utilization will involve a combination of both large-scale treatment and refinement processes.The paper aims to offer references and insights for the effective utilization and environmental protection of CBSWs.Future direction will focus on the collaborative utilization of CBSWs,emphasizing on the combination of large-scale and high-value utilization.In addition,there is a need to establish a comprehensive database based on on-site production practices,explore on-site solutions to reduce transportation costs,and improve physicochemical properties during the production process.展开更多
Aiming at mitigating the high risks associated with conventional explosive blasting,this study developed a safe directional fracturing technique,i.e.instantaneous expansion with a single fracture(IESF),using a coal-ba...Aiming at mitigating the high risks associated with conventional explosive blasting,this study developed a safe directional fracturing technique,i.e.instantaneous expansion with a single fracture(IESF),using a coal-based solid waste expanding agent.First,the mechanism of directional fracturing blasting by the IESF was analyzed,and the criterion of directional crack initiation was established.On this basis,laboratory experiments and numerical simulations were conducted to systematically evaluate the directional fracturing blasting performance of the IESF.The results indicate that the IESF presents an excellent directional fracturing effect,with average surface undulation differences ranging from 8.1 mm to 22.7 mm on the fracture surfaces.Moreover,during concrete fracturing tests,the stresses and strains in the fracturing direction are measured to be 2.16-3.71 times and 8 times larger than those in the nonfracturing direction,respectively.Finally,the IESF technique was implemented for no-pillar mining with gob-side entry retaining through roof cutting and pressure relief in an underground coal mine.The IESF technique effectively created directional cracks in the roof without causing severe roadway deformation,achieving an average cutting rate and maximum roadway deformation of 94%and 197 mm,respectively.These on-site test results verified its excellent directional rock fracturing performance.The IESF technique,which is safe,efficient,and green,has considerable application prospects in the field of rock mechanics and engineering.展开更多
As a result of shortage supply of oil resources, the process for the alternative coal-based fuel, dimethyl ether （DME）, has emerged as an important process in chemical engineering field. With the laboratory experime...As a result of shortage supply of oil resources, the process for the alternative coal-based fuel, dimethyl ether （DME）, has emerged as an important process in chemical engineering field. With the laboratory experiment data about DME synthesis and separation, the production process for DME with high purity is proposed when one-step synthesis of DME in slurry bed reactor from syngas is adopted. On the basis of experimental research and process analysis, the proper unit modules and thermophysical calculation methods for the simulation process are selected. Incorporated the experimentally determined parameters of reaction dynamic model for DME synthesis, regression constants of parameters in non-random two-liquid equation （NRTL） model for binary component in DME separation system with built-in properties model, .the process flowsheet, is.developed and simulated on the Aspen Plus platform. The simulation results coincide well with data obtained in laboratory experiment. Accordingly, the accurate simulation results offer useful references to similar equipment design and process operation optimization.展开更多
Based on the process of coal-based self-reduction and melting separation at high temperature, it was investigated that the effect of process factors on the reduction of iron and nickel oxide, the metal yield and the n...Based on the process of coal-based self-reduction and melting separation at high temperature, it was investigated that the effect of process factors on the reduction of iron and nickel oxide, the metal yield and the nickel content in ferronickel about the laterite nickel ore, was from Philippines and contented low nickel, high iron and aluminum. The results showed that if the C/O mole ratio was not higher than 0.5 and the reduction temperature was kept as 1200°C and then increased up to 1500°C, the metal could not separate from molten slag for the A series of experiments, which were only added CaF<sub>2</sub>. However, when the C/O ratio was added up to 0.6 - 0.8, the metal could separate well from the slag, and the yields of Fe and Ni increased gradually. But the nickel content in the metal declined from 1.79% to 1.34%. When the C/O ratio increased to 1.2, and the temperature of melting products obtained at 1200°C and rose to 1550°C, the separation of metal from slag could not be realized in B group of tests, which were only added hydrated lime. However, when both of CaF<sub>2</sub> and hydrated lime were added, the metal could separate from slag in C group. In order to increase the content of nickel in the metal, it is necessary to restrain the reduction of iron oxide. When the C/O mole ratio is 0.6, the nickel content of metal could be 1.79%, which was higher than the theoretical ratio 1.65% of Ni/(Ni + Fe) of the latcritic nickel ore, but the yield of nickle was only 71.3%.展开更多
With the continuous development of various industries and the increasing use of electricity and fuel,the emission of large amounts of greenhouse gases has seriously affected the ecosystem.Bulk coal is often used as a ...With the continuous development of various industries and the increasing use of electricity and fuel,the emission of large amounts of greenhouse gases has seriously affected the ecosystem.Bulk coal is often used as a fuel for metallurgy and power generation,but the harmful gases produced by its combustion cause serious pollution to the environment.To reduce the emission of harmful gases,we found that biomass briquette has the characteristics of low heavy metal content and less pollutant release when burned.In this paper,the preparation and influencing factors of biomass briquette,the characteristics of different types of biomass briquette and the pollution characteristics of biomass briquette are reviewed.The potential pollution during the preparation and combustion of biomass briquette was also discussed from the perspective of life cycle assessment.Compared with bulk coal,biomass briquette emits fewer toxic gases during preparation and combustion,such as NO_(x)and SO_(2).Secondly,the preparation of biomass briquette can also reduce the burden of water resources and soil.To that end,we explore the hazards caused by the preparation and combustion of biomass briquette,analyze its impact on the environment and human body,and summarize the sulfur and nitrogen retention capacity of biomass briquette to achieve the purpose of reducing harmful gas emissions.The results show that biomass briquette can be used as clean coal-based energy instead of traditional energy because of its low harmful substance content.The development and application prospect of biomass briquette under the framework of sustainable development are discussed.展开更多
The isothermal oxidation kinetics of vanadium–titanium magnetite(VTM)pellets prepared with 3Co-binder(coal-based colloidal composite binder)and F-binder(pulverized Funa binder)are compared.The oxidation process was a...The isothermal oxidation kinetics of vanadium–titanium magnetite(VTM)pellets prepared with 3Co-binder(coal-based colloidal composite binder)and F-binder(pulverized Funa binder)are compared.The oxidation process was analyzed using the first-order irreversible reaction,following the shrinking unreacted nucleus model.The results demonstrate that VTM pellets prepared with 3Co-binder exhibit a faster oxidation rate than those with F-binder across the temperatures ranging from 1073 to 1473 K.In both cases,the oxidation process was controlled by an interfacial chemical reaction during the pre-oxidation stage and by internal diffusion during the mid-oxidation stage.The type of binder did not influence the primary oxidation control mechanism of the VTM pellets.However,the apparent rate constants in the pre-oxidation stage and the internal diffusion coefficients in the mid-oxidation stage were higher for pellets with 3Co-binder compared to those with F-binder.The apparent activation energies for the 3Co-binder pellets were similar to those of bentonite,indicating favorable kinetic conditions without negative impacts on the oxidation process.Nonetheless,it is important to note that pellets with F-binder required a longer oxidation time than those with 3Co-binder.展开更多
Solid wastes derived from metallurgical industries pose a significant threat to environment. The utilization and disposal of these solid wastes are the major concern in the world. Semi-coke generated in coal-based dir...Solid wastes derived from metallurgical industries pose a significant threat to environment. The utilization and disposal of these solid wastes are the major concern in the world. Semi-coke generated in coal-based direct reduction process of iron ore is a by-product and its suitable utilization is not available so far. In order to handle it properly, the characteristics of this by-product were comprehensively investigated. A series of analysis methods were used to demonstrate its mineral compositions, petrography and physico-chemical properties. The results reveal that the semi-coke has poor washability. The fixed carbon content of semi-coke reaches 76.11% and the gross calorific value is 28.10 MJ/kg, both of which are similar to those of traditional sinter coke breeze. Also, semi-coke ash possesses lower content of SiO2, Al2O3, S and higher content of CaO and MgO, which could improve the strength of sinter ore when partially substituting for coke breeze in sintering. Semi-coke features well-development porous structure and higher reaction activity, which predicts that the sintering speed could be elevated to some extent when employing it as a partial replacement of coke breeze, so the studies further suggest that the potential adverse effect of the high reactivity on sintering process could be weakened by adequately coarsening the semi-coke's particle size.展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of significant,novel,and high-impact research in the fields of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF...The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF)argon plasma,and the temperatures were measured using a DPV-2000 monitor.A model combining the electromagnetism,thermal flow,and heat transfer characteristics of powder during in-flight heating in argon plasma was proposed.The melting processes of CeO_(2)powders of different diameters,with and without thermal resistance effect,were investigated.Results show that the heating process of CeO_(2)powder particles consists of three main stages,one of which is relevant to a dimensionless parameter known as the Biot number.When the Biot value≥0.1,thermal resistance increases significantly,especially for the larger powders.The predicted temperature of the particles at the outlet(1800–2880 K)is in good agreement with the experimental result.展开更多
The hot compression deformation behavior of Mg-6Zn-1Mn-0.5Ca(ZM61-0.5Ca)and Mg-6Zn-1Mn-2Sn-0.5Ca(ZMT612-0.5Ca)alloys was investigated at deformation temperatures ranging from 250℃to 400℃and strain rates varying from...The hot compression deformation behavior of Mg-6Zn-1Mn-0.5Ca(ZM61-0.5Ca)and Mg-6Zn-1Mn-2Sn-0.5Ca(ZMT612-0.5Ca)alloys was investigated at deformation temperatures ranging from 250℃to 400℃and strain rates varying from 0.001 s^(-1) to 1 s^(-1).The results show that the addition of Sn promotes dynamic recrystallization(DRX),and CaMgSn phases can act as nucleation sites during the compression deformation.Flow stress increases with increasing the strain rate and decreasing the temperature.Both the ZM61-0.5Ca and ZMT612-0.5Ca alloys exhibit obvious DRX characteristics.CaMgSn phases can effectively inhibit dislocation motion with the addition of Sn,thus increasing the peak fl ow stress of the alloy.The addition of Sn increases the hot deformation activation energy of the ZM61-0.5Ca alloy from 199.654 kJ/mol to 276.649 kJ/mol,thus improving the thermal stability of the alloy.For the ZMT612-0.5Ca alloy,the optimal hot deformation parameters are determined to be a deformation temperature range of 350–400℃and a strain rate range of 0.001–0.01 s^(-1).展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durabili...Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durability,and corrosion resistance.These metals have body-centered cubic crystal structure,characterized by limited slip systems and impeded dislocation motion,resulting in significant low-temperature brittleness,which poses challenges for the conventional processing.Additive manufacturing technique provides an innovative approach,enabling the production of intricate parts without molds,which significantly improves the efficiency of material usage.This review provides a comprehensive overview of the advancements in additive manufacturing techniques for the production of refractory metals,such as W,Ta,Mo,and Nb,particularly the laser powder bed fusion.In this review,the influence mechanisms of key process parameters(laser power,scan strategy,and powder characteristics)on the evolution of material microstructure,the formation of metallurgical defects,and mechanical properties were discussed.Generally,optimizing powder characteristics,such as sphericity,implementing substrate preheating,and formulating alloying strategies can significantly improve the densification and crack resistance of manufactured parts.Meanwhile,strictly controlling the oxygen impurity content and optimizing the energy density input are also the key factors to achieve the simultaneous improvement in strength and ductility of refractory metals.Although additive manufacturing technique provides an innovative solution for processing refractory metals,critical issues,such as residual stress control,microstructure and performance anisotropy,and process stability,still need to be addressed.This review not only provides a theoretical basis for the additive manufacturing of high-performance refractory metals,but also proposes forward-looking directions for their industrial application.展开更多
Digital twin technology brings more opportunities and challenges to chemical engineering in both academic and industry.A complex process could have multiple digitalization needs,including simulation,monitoring,operato...Digital twin technology brings more opportunities and challenges to chemical engineering in both academic and industry.A complex process could have multiple digitalization needs,including simulation,monitoring,operator training,etc.;thus,a hierarchical digital twin would be a comprehensive solution to that.In this study,a novel and general framework of the digital twin is proposed for operations in process industry.With the hierarchical structure,the framework can handle various tasks driven by different roles in process industry,including managers,engineers,and operators.To complete these tasks,the framework consists of three modules:OAS(Operation Analysis System),OMS(Operation Monitoring System),and OTS(Operator Training System).Each module focuses on one unique type of demand from the staff,as well as interactions among them enabling efficient data sharing.Based on the hierarchical framework,a digital twin system is applied for one complex industrial nitration process,which successfully enhances the operation efficiency and safety in several industrial scenarios with different demands.展开更多
Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing addit...Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.展开更多
Processes supported by process-aware information systems are subject to continuous and often subtle changes due to evolving operational,organizational,or regulatory factors.These changes,referred to as incremental con...Processes supported by process-aware information systems are subject to continuous and often subtle changes due to evolving operational,organizational,or regulatory factors.These changes,referred to as incremental concept drift,gradually alter the behavior or structure of processes,making their detection and localization a challenging task.Traditional process mining techniques frequently assume process stationarity and are limited in their ability to detect such drift,particularly from a control-flow perspective.The objective of this research is to develop an interpretable and robust framework capable of detecting and localizing incremental concept drift in event logs,with a specific emphasis on the structural evolution of control-flow semantics in processes.We propose DriftXMiner,a control-flow-aware hybrid framework that combines statistical,machine learning,and process model analysis techniques.The approach comprises three key components:(1)Cumulative Drift Scanner that tracks directional statistical deviations to detect early drift signals;(2)a Temporal Clustering and Drift-Aware Forest Ensemble(DAFE)to capture distributional and classification-level changes in process behavior;and(3)Petri net-based process model reconstruction,which enables the precise localization of structural drift using transition deviation metrics and replay fitness scores.Experimental validation on the BPI Challenge 2017 event log demonstrates that DriftXMiner effectively identifies and localizes gradual and incremental process drift over time.The framework achieves a detection accuracy of 92.5%,a localization precision of 90.3%,and an F1-score of 0.91,outperforming competitive baselines such as CUSUM+Histograms and ADWIN+Alpha Miner.Visual analyses further confirm that identified drift points align with transitions in control-flow models and behavioral cluster structures.DriftXMiner offers a novel and interpretable solution for incremental concept drift detection and localization in dynamic,process-aware systems.By integrating statistical signal accumulation,temporal behavior profiling,and structural process mining,the framework enables finegrained drift explanation and supports adaptive process intelligence in evolving environments.Its modular architecture supports extension to streaming data and real-time monitoring contexts.展开更多
This study investigated the effects of xu-argument-based continuation writing on learners’processing of source texts.Seventy-five participants were randomly assigned to three conditions:(1)continuation writing,(2)sum...This study investigated the effects of xu-argument-based continuation writing on learners’processing of source texts.Seventy-five participants were randomly assigned to three conditions:(1)continuation writing,(2)summary writing,or(3)reading comprehension.Eye-tracking data were collected during reading,measuring early(first fixation duration,first pass duration)and late(go-past time,total fixation duration)eye movements.During writing,source-text rereading was tracked via fixation counts and durations.Results showed that task type did not affect initial lexical access,as first fixation duration showed no group differences.However,both production groups exhibited significantly longer first pass durations than the reading comprehension group.Late measures revealed a gradient pattern:the continuation writing group spent significantly longer gopast time and total fixation duration than the summary writing group,which exceeded the reading comprehension group.This indicates that continuation tasks promoted deeper cognitive engagement during reading.During writing,the continuation writing group spent more time rereading the source text with higher fixation counts than the summary writing group.These findings suggest that continuation writing triggers more intensive reader-text interaction during pre-writing and enhances comprehension-production coupling through sustained attention to input during writing.This study sheds light on the cognitive mechanisms underlying the theoretical and pedagogical value of xu-argument.展开更多
Suancai has a lengthy history and a wide range of categories,which has some influence on the pickled diet culture around the world.Suancai production is transitioning to a large-scale,standardized production due to th...Suancai has a lengthy history and a wide range of categories,which has some influence on the pickled diet culture around the world.Suancai production is transitioning to a large-scale,standardized production due to the growth of the market.It has a unique flavor and is rich in nutrients,and its abundance of free amino acids,vitamins and phenolics has many positive effects on the human body.This review gives the types and history of suancai,as well as its impact on the world’s pickled culture.The changes in nutritional composition and flavor of suancai during fermentation are summarized.It presented the production technology and influencing factors of the northeast suancai,examined the quality and safety issues in suancai,and put forth some ideas and opinions on the standardization development of the suancai industry.It also summarized the geographic distribution and flora diversity of pickles around the world.In order to provide some knowledge and guidance for the promotion of modern industrial production in the suancai industry.展开更多
基金supported by the National Key Research and Development Program of China(Nos.2023YFC3903900 and 2023YFC3903904)the National Natural Science Foundation Youth Foundation of China(No.52404356)the China Baowu Low Carbon Metallurgy Innovation Foundation(No.BWLCF202216)。
文摘Phosphorus tends to migrate into metallic iron during the direct reduction of high-phosphorus oolitic iron ore,leading to undesirable phosphorus enrichment in metallic iron.However,the underlying reduction and migration mechanisms remain poorly understood.Phosphorus behavior during coal-based reduction was systematically investigated through theoretical modeling and experimental approaches.Thermodynamic analysis revealed that the carbon reduction of solid Ca_(3)(PO_(4))_(2)to gaseous P_(2)requires temperatures exceeding 1400℃.Notably,this threshold significantly decreases to 1130.5℃in the presence of SiO_(2)and Al_(2)O_(3).Further investigations demonstrated that Ca_(3)(PO_(4))_(2)co-reduces with Fe_(x)O_(γ)in the presence of SiO_(2)-Al_(2)O_(3)-Fe_(x)O_(γ),forming Fe_(3)P(instead of gaseous P_(2))at a markedly lower temperature of 778.7℃.Mechanistic studies indicate that the inherent thermal stability of Ca_(3)(PO_(4))_(2)inhibits the generation of reactive[P_(2)O_(5)].However,SiO_(2)-Al_(2)O_(3)coexistence destabilizes Ca_(3)(PO_(4))_(2)while exponentially enhancing[P_(2)O_(5)]activity.This synergistic effect dramatically promotes the phosphorus mineral reduction.Characterization confirmed that Ca_(3)(PO_(4))_(2)migrated into the slag phase(4FeO·Al_(2)O_(3)·3SiO_(2)·CaO·P_(2)O_(5)).Subsequently,the reactive P_(2)O_(5)in slag is reduced with metallic iron to form Fe_(3)P,which further dissolves into theα-Fe matrix through solid-state diffusion,ultimately generating Fe-P solid solutions.
文摘一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家赫拉克利特所说的“万物流转”,又说“你不能两次踏进同一条河流,因为新的水不断地流过你的身旁”,他所表达的意思是“世界上唯一不变的就是变化”。
基金Projects(51274240,51204209) supported by the National Natural Science Foundation of ChinaProject(2012M521545) supported by the National Postdoctoral Science Foundation of China
文摘A process of purification of coal-based coke powder as anode the treatment of coke powder with dilute hydrofluoric acid solution, for Li-ion batteries was attempted. The process started with followed by united-acid-leaching using sulfuric acid and hydrochloric acid. The effects of altering the hydrofluoric acid addition, hydrofluoric acid concentration, contact time, temperature and acid type were investigated. A minimum ash content of 0.35% was obtained when proper conditions were applied. The electrochemical performance of purified coke powder shows greatly improved electrochemical performance. The as-purified coke powder presented an initial reversible capacity of 257.4 mAh/g and a retention rate of 95% after 50 cycles. The proposed purification process paves a way to prepare a promising anode material with good performance with low cost of coke powder for Li-ion batteries.
基金supported by the following:“National Natural Science Foundation of China”(22478231)“Natural Science Foundation of Henan”(242300421449)“Fundamental Research Program of Shanxi Province”(202403021221011).
文摘Coal-based soild wastes(CBSWs)are industrial byproducts that can be harmful to the environment.The exploitation and utilization of CBsWs offer societal advantages such as resource conservation,pollution reduction,and cost-effective production.However,environmentally sustainable management remains a worldwide challenge due to the substantial production volume and limited disposal capacity of CBSWs.The physicochemical properties and utilization of CBSWs are summarized,including fly ash,coal gangue and coal gasification slag.It also presents the current global applications status of CBSWs resources and examines market supply and demand.Subsequently,the paper provides an overview of studies on ways to utilise CBSWs,highlighting the primary avenues of CBSWs resource utilization which are mainly from the fields of chemical materials,metallurgy and agriculture.Furthermore,a comparative evaluation of the various methods for CBSWs resource recovery is conducted,outlining their respective advantages and disadvantages.The future development of CBSWs recycling processes is also discussed.The review concludes that while there is a growing need for attention in CBSWs recycling,its utilization will involve a combination of both large-scale treatment and refinement processes.The paper aims to offer references and insights for the effective utilization and environmental protection of CBSWs.Future direction will focus on the collaborative utilization of CBSWs,emphasizing on the combination of large-scale and high-value utilization.In addition,there is a need to establish a comprehensive database based on on-site production practices,explore on-site solutions to reduce transportation costs,and improve physicochemical properties during the production process.
基金supported by the National Natural Science Foundation of China(Grant No.52404155)State Key Laboratory of Mining Disaster Prevention and Control(Shandong University of Science and Technology)+1 种基金Ministry of Education(Grant No.JMDPC202402)supported by the opening project of State Key Laboratory of Explosion Science and Safety Protection(Beijing Institute of Technology).The opening project number is KFJJ24-20M.
文摘Aiming at mitigating the high risks associated with conventional explosive blasting,this study developed a safe directional fracturing technique,i.e.instantaneous expansion with a single fracture(IESF),using a coal-based solid waste expanding agent.First,the mechanism of directional fracturing blasting by the IESF was analyzed,and the criterion of directional crack initiation was established.On this basis,laboratory experiments and numerical simulations were conducted to systematically evaluate the directional fracturing blasting performance of the IESF.The results indicate that the IESF presents an excellent directional fracturing effect,with average surface undulation differences ranging from 8.1 mm to 22.7 mm on the fracture surfaces.Moreover,during concrete fracturing tests,the stresses and strains in the fracturing direction are measured to be 2.16-3.71 times and 8 times larger than those in the nonfracturing direction,respectively.Finally,the IESF technique was implemented for no-pillar mining with gob-side entry retaining through roof cutting and pressure relief in an underground coal mine.The IESF technique effectively created directional cracks in the roof without causing severe roadway deformation,achieving an average cutting rate and maximum roadway deformation of 94%and 197 mm,respectively.These on-site test results verified its excellent directional rock fracturing performance.The IESF technique,which is safe,efficient,and green,has considerable application prospects in the field of rock mechanics and engineering.
基金Supported by the National Technology Support Program of China(2006BAE02B02)the National Basic Research Program of China (2005CB221205)
文摘As a result of shortage supply of oil resources, the process for the alternative coal-based fuel, dimethyl ether （DME）, has emerged as an important process in chemical engineering field. With the laboratory experiment data about DME synthesis and separation, the production process for DME with high purity is proposed when one-step synthesis of DME in slurry bed reactor from syngas is adopted. On the basis of experimental research and process analysis, the proper unit modules and thermophysical calculation methods for the simulation process are selected. Incorporated the experimentally determined parameters of reaction dynamic model for DME synthesis, regression constants of parameters in non-random two-liquid equation （NRTL） model for binary component in DME separation system with built-in properties model, .the process flowsheet, is.developed and simulated on the Aspen Plus platform. The simulation results coincide well with data obtained in laboratory experiment. Accordingly, the accurate simulation results offer useful references to similar equipment design and process operation optimization.
文摘Based on the process of coal-based self-reduction and melting separation at high temperature, it was investigated that the effect of process factors on the reduction of iron and nickel oxide, the metal yield and the nickel content in ferronickel about the laterite nickel ore, was from Philippines and contented low nickel, high iron and aluminum. The results showed that if the C/O mole ratio was not higher than 0.5 and the reduction temperature was kept as 1200°C and then increased up to 1500°C, the metal could not separate from molten slag for the A series of experiments, which were only added CaF<sub>2</sub>. However, when the C/O ratio was added up to 0.6 - 0.8, the metal could separate well from the slag, and the yields of Fe and Ni increased gradually. But the nickel content in the metal declined from 1.79% to 1.34%. When the C/O ratio increased to 1.2, and the temperature of melting products obtained at 1200°C and rose to 1550°C, the separation of metal from slag could not be realized in B group of tests, which were only added hydrated lime. However, when both of CaF<sub>2</sub> and hydrated lime were added, the metal could separate from slag in C group. In order to increase the content of nickel in the metal, it is necessary to restrain the reduction of iron oxide. When the C/O mole ratio is 0.6, the nickel content of metal could be 1.79%, which was higher than the theoretical ratio 1.65% of Ni/(Ni + Fe) of the latcritic nickel ore, but the yield of nickle was only 71.3%.
基金the Young Elite Scientists Sponsorship Program by CAST(2023QNRC001).
文摘With the continuous development of various industries and the increasing use of electricity and fuel,the emission of large amounts of greenhouse gases has seriously affected the ecosystem.Bulk coal is often used as a fuel for metallurgy and power generation,but the harmful gases produced by its combustion cause serious pollution to the environment.To reduce the emission of harmful gases,we found that biomass briquette has the characteristics of low heavy metal content and less pollutant release when burned.In this paper,the preparation and influencing factors of biomass briquette,the characteristics of different types of biomass briquette and the pollution characteristics of biomass briquette are reviewed.The potential pollution during the preparation and combustion of biomass briquette was also discussed from the perspective of life cycle assessment.Compared with bulk coal,biomass briquette emits fewer toxic gases during preparation and combustion,such as NO_(x)and SO_(2).Secondly,the preparation of biomass briquette can also reduce the burden of water resources and soil.To that end,we explore the hazards caused by the preparation and combustion of biomass briquette,analyze its impact on the environment and human body,and summarize the sulfur and nitrogen retention capacity of biomass briquette to achieve the purpose of reducing harmful gas emissions.The results show that biomass briquette can be used as clean coal-based energy instead of traditional energy because of its low harmful substance content.The development and application prospect of biomass briquette under the framework of sustainable development are discussed.
基金supported by National Natural Science Foundation of China(No.52204302)Young Elite Scientist Sponsorship Program by CAST(No.YESS20220533)Hunan Provincial Natural Science Foundation of China(No.2022JJ40625).
文摘The isothermal oxidation kinetics of vanadium–titanium magnetite(VTM)pellets prepared with 3Co-binder(coal-based colloidal composite binder)and F-binder(pulverized Funa binder)are compared.The oxidation process was analyzed using the first-order irreversible reaction,following the shrinking unreacted nucleus model.The results demonstrate that VTM pellets prepared with 3Co-binder exhibit a faster oxidation rate than those with F-binder across the temperatures ranging from 1073 to 1473 K.In both cases,the oxidation process was controlled by an interfacial chemical reaction during the pre-oxidation stage and by internal diffusion during the mid-oxidation stage.The type of binder did not influence the primary oxidation control mechanism of the VTM pellets.However,the apparent rate constants in the pre-oxidation stage and the internal diffusion coefficients in the mid-oxidation stage were higher for pellets with 3Co-binder compared to those with F-binder.The apparent activation energies for the 3Co-binder pellets were similar to those of bentonite,indicating favorable kinetic conditions without negative impacts on the oxidation process.Nonetheless,it is important to note that pellets with F-binder required a longer oxidation time than those with 3Co-binder.
基金Project(2011GH561685)supported by the China Torch Program
文摘Solid wastes derived from metallurgical industries pose a significant threat to environment. The utilization and disposal of these solid wastes are the major concern in the world. Semi-coke generated in coal-based direct reduction process of iron ore is a by-product and its suitable utilization is not available so far. In order to handle it properly, the characteristics of this by-product were comprehensively investigated. A series of analysis methods were used to demonstrate its mineral compositions, petrography and physico-chemical properties. The results reveal that the semi-coke has poor washability. The fixed carbon content of semi-coke reaches 76.11% and the gross calorific value is 28.10 MJ/kg, both of which are similar to those of traditional sinter coke breeze. Also, semi-coke ash possesses lower content of SiO2, Al2O3, S and higher content of CaO and MgO, which could improve the strength of sinter ore when partially substituting for coke breeze in sintering. Semi-coke features well-development porous structure and higher reaction activity, which predicts that the sintering speed could be elevated to some extent when employing it as a partial replacement of coke breeze, so the studies further suggest that the potential adverse effect of the high reactivity on sintering process could be weakened by adequately coarsening the semi-coke's particle size.
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of significant,novel,and high-impact research in the fields of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
基金National Natural Science Foundation of China(11875039)Shanxi Scholarship Council of China(2023-033)+2 种基金Fundamental Research Program of Shanxi Province(202303021221071)China Baowu Low Carbon Metallurgical Innovation Foundation(2022)2023 Anhui Major Industrial Innovation Plan Project。
文摘The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF)argon plasma,and the temperatures were measured using a DPV-2000 monitor.A model combining the electromagnetism,thermal flow,and heat transfer characteristics of powder during in-flight heating in argon plasma was proposed.The melting processes of CeO_(2)powders of different diameters,with and without thermal resistance effect,were investigated.Results show that the heating process of CeO_(2)powder particles consists of three main stages,one of which is relevant to a dimensionless parameter known as the Biot number.When the Biot value≥0.1,thermal resistance increases significantly,especially for the larger powders.The predicted temperature of the particles at the outlet(1800–2880 K)is in good agreement with the experimental result.
基金Sichuan Science and Technology Program(2025ZNSFSC1341)Fundamental Research Funds for the Central Universities(J2022-090,25CAFUC04087)。
文摘The hot compression deformation behavior of Mg-6Zn-1Mn-0.5Ca(ZM61-0.5Ca)and Mg-6Zn-1Mn-2Sn-0.5Ca(ZMT612-0.5Ca)alloys was investigated at deformation temperatures ranging from 250℃to 400℃and strain rates varying from 0.001 s^(-1) to 1 s^(-1).The results show that the addition of Sn promotes dynamic recrystallization(DRX),and CaMgSn phases can act as nucleation sites during the compression deformation.Flow stress increases with increasing the strain rate and decreasing the temperature.Both the ZM61-0.5Ca and ZMT612-0.5Ca alloys exhibit obvious DRX characteristics.CaMgSn phases can effectively inhibit dislocation motion with the addition of Sn,thus increasing the peak fl ow stress of the alloy.The addition of Sn increases the hot deformation activation energy of the ZM61-0.5Ca alloy from 199.654 kJ/mol to 276.649 kJ/mol,thus improving the thermal stability of the alloy.For the ZMT612-0.5Ca alloy,the optimal hot deformation parameters are determined to be a deformation temperature range of 350–400℃and a strain rate range of 0.001–0.01 s^(-1).
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
基金National MCF Energy R&D Program(2024YFE03260300)。
文摘Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durability,and corrosion resistance.These metals have body-centered cubic crystal structure,characterized by limited slip systems and impeded dislocation motion,resulting in significant low-temperature brittleness,which poses challenges for the conventional processing.Additive manufacturing technique provides an innovative approach,enabling the production of intricate parts without molds,which significantly improves the efficiency of material usage.This review provides a comprehensive overview of the advancements in additive manufacturing techniques for the production of refractory metals,such as W,Ta,Mo,and Nb,particularly the laser powder bed fusion.In this review,the influence mechanisms of key process parameters(laser power,scan strategy,and powder characteristics)on the evolution of material microstructure,the formation of metallurgical defects,and mechanical properties were discussed.Generally,optimizing powder characteristics,such as sphericity,implementing substrate preheating,and formulating alloying strategies can significantly improve the densification and crack resistance of manufactured parts.Meanwhile,strictly controlling the oxygen impurity content and optimizing the energy density input are also the key factors to achieve the simultaneous improvement in strength and ductility of refractory metals.Although additive manufacturing technique provides an innovative solution for processing refractory metals,critical issues,such as residual stress control,microstructure and performance anisotropy,and process stability,still need to be addressed.This review not only provides a theoretical basis for the additive manufacturing of high-performance refractory metals,but also proposes forward-looking directions for their industrial application.
基金support of the“Pioneer”and“Leading Goose”Research&Development Program of Zhejiang(2024C01028)the State Key Laboratory of Industrial Control Technology,China(ICT2024C04)are gratefully acknowledged.
文摘Digital twin technology brings more opportunities and challenges to chemical engineering in both academic and industry.A complex process could have multiple digitalization needs,including simulation,monitoring,operator training,etc.;thus,a hierarchical digital twin would be a comprehensive solution to that.In this study,a novel and general framework of the digital twin is proposed for operations in process industry.With the hierarchical structure,the framework can handle various tasks driven by different roles in process industry,including managers,engineers,and operators.To complete these tasks,the framework consists of three modules:OAS(Operation Analysis System),OMS(Operation Monitoring System),and OTS(Operator Training System).Each module focuses on one unique type of demand from the staff,as well as interactions among them enabling efficient data sharing.Based on the hierarchical framework,a digital twin system is applied for one complex industrial nitration process,which successfully enhances the operation efficiency and safety in several industrial scenarios with different demands.
基金National Key Research and Development Program of China(2022YFB4600902)Shandong Provincial Science Foundation for Outstanding Young Scholars(ZR2024YQ020)。
文摘Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.
文摘Processes supported by process-aware information systems are subject to continuous and often subtle changes due to evolving operational,organizational,or regulatory factors.These changes,referred to as incremental concept drift,gradually alter the behavior or structure of processes,making their detection and localization a challenging task.Traditional process mining techniques frequently assume process stationarity and are limited in their ability to detect such drift,particularly from a control-flow perspective.The objective of this research is to develop an interpretable and robust framework capable of detecting and localizing incremental concept drift in event logs,with a specific emphasis on the structural evolution of control-flow semantics in processes.We propose DriftXMiner,a control-flow-aware hybrid framework that combines statistical,machine learning,and process model analysis techniques.The approach comprises three key components:(1)Cumulative Drift Scanner that tracks directional statistical deviations to detect early drift signals;(2)a Temporal Clustering and Drift-Aware Forest Ensemble(DAFE)to capture distributional and classification-level changes in process behavior;and(3)Petri net-based process model reconstruction,which enables the precise localization of structural drift using transition deviation metrics and replay fitness scores.Experimental validation on the BPI Challenge 2017 event log demonstrates that DriftXMiner effectively identifies and localizes gradual and incremental process drift over time.The framework achieves a detection accuracy of 92.5%,a localization precision of 90.3%,and an F1-score of 0.91,outperforming competitive baselines such as CUSUM+Histograms and ADWIN+Alpha Miner.Visual analyses further confirm that identified drift points align with transitions in control-flow models and behavioral cluster structures.DriftXMiner offers a novel and interpretable solution for incremental concept drift detection and localization in dynamic,process-aware systems.By integrating statistical signal accumulation,temporal behavior profiling,and structural process mining,the framework enables finegrained drift explanation and supports adaptive process intelligence in evolving environments.Its modular architecture supports extension to streaming data and real-time monitoring contexts.
文摘This study investigated the effects of xu-argument-based continuation writing on learners’processing of source texts.Seventy-five participants were randomly assigned to three conditions:(1)continuation writing,(2)summary writing,or(3)reading comprehension.Eye-tracking data were collected during reading,measuring early(first fixation duration,first pass duration)and late(go-past time,total fixation duration)eye movements.During writing,source-text rereading was tracked via fixation counts and durations.Results showed that task type did not affect initial lexical access,as first fixation duration showed no group differences.However,both production groups exhibited significantly longer first pass durations than the reading comprehension group.Late measures revealed a gradient pattern:the continuation writing group spent significantly longer gopast time and total fixation duration than the summary writing group,which exceeded the reading comprehension group.This indicates that continuation tasks promoted deeper cognitive engagement during reading.During writing,the continuation writing group spent more time rereading the source text with higher fixation counts than the summary writing group.These findings suggest that continuation writing triggers more intensive reader-text interaction during pre-writing and enhances comprehension-production coupling through sustained attention to input during writing.This study sheds light on the cognitive mechanisms underlying the theoretical and pedagogical value of xu-argument.
基金supported by the Foundation of National Dairy Technology Innovation Center(2022-Open Funding Project-12)Foundation of National Dairy Technology Innovation Center(2022-Scientific Research-9)+2 种基金Key Project of National Dairy Innovation Research Center of Inner Mongolia(2021-National Dairy Innovation Research Center-8)Key Projects of Research Operating Expenses of Provincial Research Institutes in Heilongjiang Province(CZKYF2021-2-B017)Key Project of Natural Science Foundation of Heilongjiang Province(ZD2022C007).
文摘Suancai has a lengthy history and a wide range of categories,which has some influence on the pickled diet culture around the world.Suancai production is transitioning to a large-scale,standardized production due to the growth of the market.It has a unique flavor and is rich in nutrients,and its abundance of free amino acids,vitamins and phenolics has many positive effects on the human body.This review gives the types and history of suancai,as well as its impact on the world’s pickled culture.The changes in nutritional composition and flavor of suancai during fermentation are summarized.It presented the production technology and influencing factors of the northeast suancai,examined the quality and safety issues in suancai,and put forth some ideas and opinions on the standardization development of the suancai industry.It also summarized the geographic distribution and flora diversity of pickles around the world.In order to provide some knowledge and guidance for the promotion of modern industrial production in the suancai industry.
