Phosphorus tends to migrate into metallic iron during the direct reduction of high-phosphorus oolitic iron ore,leading to undesirable phosphorus enrichment in metallic iron.However,the underlying reduction and migrati...Phosphorus tends to migrate into metallic iron during the direct reduction of high-phosphorus oolitic iron ore,leading to undesirable phosphorus enrichment in metallic iron.However,the underlying reduction and migration mechanisms remain poorly understood.Phosphorus behavior during coal-based reduction was systematically investigated through theoretical modeling and experimental approaches.Thermodynamic analysis revealed that the carbon reduction of solid Ca_(3)(PO_(4))_(2)to gaseous P_(2)requires temperatures exceeding 1400℃.Notably,this threshold significantly decreases to 1130.5℃in the presence of SiO_(2)and Al_(2)O_(3).Further investigations demonstrated that Ca_(3)(PO_(4))_(2)co-reduces with Fe_(x)O_(γ)in the presence of SiO_(2)-Al_(2)O_(3)-Fe_(x)O_(γ),forming Fe_(3)P(instead of gaseous P_(2))at a markedly lower temperature of 778.7℃.Mechanistic studies indicate that the inherent thermal stability of Ca_(3)(PO_(4))_(2)inhibits the generation of reactive[P_(2)O_(5)].However,SiO_(2)-Al_(2)O_(3)coexistence destabilizes Ca_(3)(PO_(4))_(2)while exponentially enhancing[P_(2)O_(5)]activity.This synergistic effect dramatically promotes the phosphorus mineral reduction.Characterization confirmed that Ca_(3)(PO_(4))_(2)migrated into the slag phase(4FeO·Al_(2)O_(3)·3SiO_(2)·CaO·P_(2)O_(5)).Subsequently,the reactive P_(2)O_(5)in slag is reduced with metallic iron to form Fe_(3)P,which further dissolves into theα-Fe matrix through solid-state diffusion,ultimately generating Fe-P solid solutions.展开更多
Graphite,encompassing both natural graphite and synthetic graphite,and graphene,have been extensively utilized and investigated as anode materials and additives in lithium-ion batteries(LIBs).In the pursuit of carbon ...Graphite,encompassing both natural graphite and synthetic graphite,and graphene,have been extensively utilized and investigated as anode materials and additives in lithium-ion batteries(LIBs).In the pursuit of carbon neutrality,LIBs are expected to play a pivotal role in reducing CO_(2)emissions by decreasing reliance on fossil fuels and enabling the integration of renewable energy sources.Owing to their technological maturity and exceptional electrochemical performance,the global production of graphite and graphene for LIBs is projected to continue expanding.Over the past decades,numerous researchers have concentrated on reducing the material and energy input whilst optimising the electrochemical performance of graphite and graphene,through novel synthesis methods and various modifications at the laboratory scale.This review provides a comprehensive examination of the manufacturing methods,environmental impact,research progress,and challenges associated with graphite and graphene in LIBs from an industrial perspective,with a particular focus on the carbon footprint of production processes.Additionally,it considers emerging challenges and future development directions of graphite and graphene,offering significant insights for ongoing and future research in the field of green LIBs.展开更多
Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,...Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,understanding the oxidation behavior of nuclear graphite is essential for reactor safety.The influence of oxidation involves multiple factors,including temperature,sample size,oxidant,impurities,filler type and size,etc.The size of the filler particles plays a crucial role in this study.Five ultrafine-and superfine-grained nuclear graphite samples(5.9-34.4μm)are manufactured using identical raw materials and manufacturing processes.Isothermal oxidation tests conducted at 650℃-750℃ are used to study the oxidation behavior.Additionally,comprehensive characterization is performed to analyze the crystal structure,surface morphology,and nanoscale to microscale pore structure of the samples.Results indicate that oxidation behavior cannot be predicted solely based on filler grain size.Reactive site concentration,characterized by active surface area,dominates the chemical reaction kinetics,whereas pore tortuosity,quantified by the structural parameterΨ,plays a key role in regulating oxidant diffusion.These findings clarify the dual role of microstructure in oxidation mechanisms and establish a theoretical and experimental basis for the design of high-performance nuclear graphite capable of long-term service in high-temperature gas-cooled reactors.展开更多
The extensive application of lithium-ion batteries in electric vehicles has led to a torrential surge of endof-life batteries.As the dominant anode material,graphite's environmental and resource costs in productio...The extensive application of lithium-ion batteries in electric vehicles has led to a torrential surge of endof-life batteries.As the dominant anode material,graphite's environmental and resource costs in production highlight the necessity of recycling spent graphite(SG).However,SG recycling technologies remain markedly underdeveloped compared to the cathode recovery status,due to perceived lower economic value.This review provides an in-depth analysis of the current SG growth trend and highlights the cost accounting for graphite recycling and the significant importance of advanced recycling technologies.By examining the failure mechanisms of graphite,various recycling and upcycling technologies in both practical application and fundamental research are fully discussed,in terms of the regeneration principle,recycling effect,strengths,and limitations of each method.Furthermore,the multi-purpose applications of recycled graphite beyond LIB anodes are explored to enhance its high-value properties.Finally,the prospects of SG recycling and large-scale application challenges are presented,including economic feasibility,process optimization,and regulatory restrictions.This review provides a comprehensive overview of developments in SG recycling strategies,offering valuable insights for narrowing the gap between fundamental research and practical applications.展开更多
The thin zinc anode in zinc-ion batteries offers the advantages of high energy density and low cost.However,issues such as uneven zinc stripping and dendrite growth significantly reduce the cycling life and safety of ...The thin zinc anode in zinc-ion batteries offers the advantages of high energy density and low cost.However,issues such as uneven zinc stripping and dendrite growth significantly reduce the cycling life and safety of the battery.To address this,this study proposes a novel zinc anode construction strategy based on a graphite paper substrate,which significantly improves the reversibility of zinc deposition/stripping by regulating the distribution of the interfacial electric field.Compared to traditional copper foil-based substrates(Cu foil@Zn),the zinc deposition layer formed on the graphite paper substrate exhibits a more uniform morphology and superior electrochemical performance.Experimental results show that the Gr paper@Zn anode surface presents a brighter metallic luster,with a mass reduction of approximately 16%compared to the Cu foil@Zn.SEM and XRD analyses confirm that the graphite paper substrate promotes the formation of a uniform and dense Zn(002)crystal face orientation deposition layer,while the Cu foil substrate forms a columnar crystal structure with Zn(101)orientation.Furthermore,the Zn||I_(2) full battery assembled with Gr paper@Zn retains 75.1%of its initial capacity after 10000 cycles at a high current rate of 10 C.The Zn||I_(2) large-area pouch battery maintains 81.2%of its capacity after 800 cycles at a current of 0.8 A.More importantly,the assembled Zn||I_(2) multilayer pouch battery delivers an Ah-level capacity(1.67 Ah)and maintains 89.9%of its capacity after 100 cycles.This work provides new interface engineering insights for the design of high-performance thin zinc anodes.展开更多
Laser-induced periodic surface structures(LIPSS)have gained increasing attention in the field of micro/nano fabrication,although achieving sub-100-nm period LIPSS with high uniformity remains a significant challenge.I...Laser-induced periodic surface structures(LIPSS)have gained increasing attention in the field of micro/nano fabrication,although achieving sub-100-nm period LIPSS with high uniformity remains a significant challenge.In this work,towards deep-subwavelength LIPSS on highly oriented pyrolytic graphite(HOPG),we demonstrate that ultra-uniform nanogratings of sub-50-nm periods and near-10-nm groove widths can be stably prepared via 800-nm femtosecond laser scanning irradiation with a high-NA objective lens under water immersion.The resulting nanogratings of strong polarization dependence,exhibiting exceptional surface flatness,period stability,and structural integrity,tend to appear at near-damage-threshold fluence regime with an appropriate effective pulse number.It turns out that the water immersion condition can significantly reduce the thermal effects of femtosecond laser ablation on HOPG,and thus via a mild,incubation-like scanning ablation process occurring in the nanogrooves with a continuous or jumping manner,this deep-subwavelength grating can achieve robust elongation growth,ensuring its long-range uniformity as well as minimal deposited debris and structural defects.Interestingly,the different incubation extension mechanisms for the mutually perpendicular and parallel settings between scanning direction and laser polarization bring not only distinct effective-pulse-number windows and somewhat different grating qualities,but also different extension stabilities in nanograting stitching via overlapping scanning lines and thus the optimal scanning strategy of parallel setting for large-area processing.In short,this study presents a convenient laser-processing approach for high precision fabrication of sub-50-nm gratings on HOPG,which would provide new insights into micro/nano-fabrication for optoelectronic metasurfaces and physics of the interaction between ultrafast laser and graphite.展开更多
The impurities and structural cracks within spent graphite(SG)in lithium-ion battery anodes hamper lithium-ion intercalation and extraction after successive charge-discharge operations,thereby yielding poor lithium st...The impurities and structural cracks within spent graphite(SG)in lithium-ion battery anodes hamper lithium-ion intercalation and extraction after successive charge-discharge operations,thereby yielding poor lithium storage behavior.Herein,low-viscosity natural deep eutectic solvent(NDES)composed of citric acid(CA)and betaine hydrochloride was employed to remove the organic impurities in SG via a one-step benign process involving hydrogen bonds and electrostatic interactions at mild conditions of 80℃ for only 30 min.After NDES leaching under optimal conditions(molar ratio of CA to betaine hydrochloride=3:1,80℃,30 min),the as-obtained sample(denoted as BG-3)exhibited an extremely clean surface,moderately enlarged interlayer distance,and more structural defects at the edge of graphite lamellae.These features facilitated lithium-ion intercalation and withdrawal,bestowing BG-3 with remarkable activity in lithium-ion battery(LIB)recycling.For instance,BG-3 delivered a capacity of 438.6 mAh g^(-1) at a current density of 0.1 A g^(-1).Its capacity retention reached 97.9%,accompanied by a Coulombic efficiency of 99.1%,upon completing 100 cycles.A molecular dynamics simulation was employed to illuminate the regeneration mechanism for anode graphite from a theoretical perspective.It revealed that NDES exhibits lower binding energy with all contaminants compared to graphite,which is favorable for NDES to eliminate impurities from graphite surfaces.This study unveils a method of recycling SG from retired LIBs by a short eco-friendly process,providing a competitive blueprint to address the shortage of battery-grade anode graphite and to achieve carbon neutrality.展开更多
To enhance the electrochemical performance of lithium-ion battery anodes with higher silicon content,it is essential to engineer their microstructure for better lithium-ion transport and mitigated volume change as wel...To enhance the electrochemical performance of lithium-ion battery anodes with higher silicon content,it is essential to engineer their microstructure for better lithium-ion transport and mitigated volume change as well.Herein,we suggest an effective approach to control the micropore structure of silicon oxide(SiO_(x))/artificial graphite(AG)composite electrodes using a perforated current collector.The electrode features a unique pore structure,where alternating high-porosity domains and low-porosity domains markedly reduce overall electrode resistance,leading to a 20%improvement in rate capability at a 5C-rate discharge condition.Using microstructure-resolved modeling and simulations,we demonstrate that the patterned micropore structure enhances lithium-ion transport,mitigating the electrolyte concentration gradient of lithium-ion.Additionally,perforating current collector with a chemical etching process increases the number of hydrogen bonding sites and enlarges the interface with the SiO_(x)/AG composite electrode,significantly improving adhesion strength.This,in turn,suppresses mechanical degradation and leads to a 50%higher capacity retention.Thus,regularly arranged micropore structure enabled by the perforated current collector successfully improves both rate capability and cycle life in SiO_(x)/AG composite electrodes,providing valuable insights into electrode engineering.展开更多
Waste graphitization cathode carbon blocks are a type of hazardous solid waste generated during the aluminum electrolysis process,and their proper disposal is a key step in the resource utilization of discarded graphi...Waste graphitization cathode carbon blocks are a type of hazardous solid waste generated during the aluminum electrolysis process,and their proper disposal is a key step in the resource utilization of discarded graphite.This study utilizes the porous“defect advantage”of a cathode carbon block matrix to prepare silicon-doped and asphalt-coated detoxified and purified waste graphitization cathode carbon blocks for use as high-performance silicon/carbon composite anode materials.The results show that the uniformly silicondoped silicon/carbon composite material features a unique amorphous carbon-encapsulated“locked silicon”structure,which effectively addresses issues such as cathode volume expansion,excessive growth of the solid electrolyte interphase(SEI)film,and poor electrical contact between active materials.Consequently,electrochemical performance is enhanced.After assembly in a half-cell,the PSCC/10%Si@C(purified waste graphitization cathode carbon/10%Si@C)material exhibits optimal electrochemical stability,with an initial charging specific capacity of 514.5 mAh/g at 0.1 C(1 C=170 mA/g)and a capacity retention rate of 95.1%after 100 cycles.At a charge rate of 2.0 C,a specific capacity of 216.9 mAh/g is achieved.This technology provides a new pathway for the economical and high-value utilization of waste cathode carbon blocks and the development of low-cost,high-performance anode materials.展开更多
Graphite and hexagonal boron nitride(h-BN),despite their structural similarity,exhibit opposing electronic properties,namely,metallic conductivity and wide-bandgap insulation,respectively.In recent years,graphene-h-BN...Graphite and hexagonal boron nitride(h-BN),despite their structural similarity,exhibit opposing electronic properties,namely,metallic conductivity and wide-bandgap insulation,respectively.In recent years,graphene-h-BN heterostructures have attracted significant research interest,with the resulting hybrid B-C-N atomic-layer systems exhibiting distinctive electronic properties.Notably,interface effects play a decisive role in governing the performance of these heterostructures.Nevertheless,owing to the lack of high-quality composites,the interfacial structure in B-C-N materials and the correlation with critical properties such as charge transport and band structure modulation are not fully clear.Here,we report the direct synthesis of a millimeter-sized hexagonal B-C-N composite via a solvent method under high-pressure and high-temperature conditions.Structural characterization reveals that the synthesized B-C-N composite contains isolated graphite and h-BN.Compared with pure h-BN,the B-C-N composite has a narrower bandgap and shows a pronounced photoelectric response in the visible light region.More interestingly,we find a graphite-like B-C compound with a thickness of about 30 nm at the graphite-h-BN interface,which forms Schottky junctions with graphite,thus realizing rectification properties.Our findings provide a method for synthesizing highquality B-C-N composites and offer new insights into the structure of the graphite-h-BN interface.展开更多
Graphite formed in response to thermal contact metamorphism of coal bodies with magmatic intrusion is referred to as coal-based graphite. The first-order Raman spectrum of all the coal-based graphite taken from the Lu...Graphite formed in response to thermal contact metamorphism of coal bodies with magmatic intrusion is referred to as coal-based graphite. The first-order Raman spectrum of all the coal-based graphite taken from the Lutang area, Hunan Province exhibits a single Raman band near 1585cm-1, which comes directly from in-plane vibration of aromatic layer assigned to the E2g mode. Their Raman band of the structural defect in-plane can be divided into 2 types: one is the defect band (D peak) caused by the primary structural delect of the graphite in graphitization process, which is called D2-peak located at 1 360 cm-1; the other is the defect bank caused by the secondary structural defect in the graphite subject to tectonic shearing stress, which is called D1 peak located at 1370cm-1. The second Raman spectrum of the coal-based graphite shows three-dimensional lattice degree in the coal-based graphite. If the three-dimensional lattice of graphite is not well developed, it exhibits only a band of 2700cm-1; if the three-dimensional lattice of the coal-based graphite has been formed, the band of 2700cm-1 is split into two Raman bands, which are respectively located near 2681 cm-1 and near 2726cm-1, Raman band intensity ratio increases synchronously as the ordering degree of three-dimensional lattice increases regularly.展开更多
Lithium-ion batteries(LIBs)are an electrochemical energy storage technology that has been widely used for portable electrical devices,electric vehicles,and grid storage,etc.To satisfy the demand for user convenience e...Lithium-ion batteries(LIBs)are an electrochemical energy storage technology that has been widely used for portable electrical devices,electric vehicles,and grid storage,etc.To satisfy the demand for user convenience especially for electric vehicles,the development of a fast-charging technology for LIBs has become a critical focus.In commercial LIBs,the slow kinetics of Li+intercalation into the graphite anode from the electrolyte solution is known as the main restriction for fast-charging.We summarize the recent advances in obtaining fast-charging graphite-based anodes,mainly involving modifications of the electrolyte solution and graphite anode.Specifically,strategies for increasing the ionic conductivity and regulating the Li+solvation/desolvation state in the electrolyte solution,as well as optimizing the fabrication and the intrinsic activity of graphite-based anodes are discussed in detail.This review considers practical ways to obtain fast Li+intercalation kinetics into a graphite anode from the electrolyte as well as analysing progress in the commercialization of fast-charging LIBs.展开更多
Coal-based soild wastes(CBSWs)are industrial byproducts that can be harmful to the environment.The exploitation and utilization of CBsWs offer societal advantages such as resource conservation,pollution reduction,and ...Coal-based soild wastes(CBSWs)are industrial byproducts that can be harmful to the environment.The exploitation and utilization of CBsWs offer societal advantages such as resource conservation,pollution reduction,and cost-effective production.However,environmentally sustainable management remains a worldwide challenge due to the substantial production volume and limited disposal capacity of CBSWs.The physicochemical properties and utilization of CBSWs are summarized,including fly ash,coal gangue and coal gasification slag.It also presents the current global applications status of CBSWs resources and examines market supply and demand.Subsequently,the paper provides an overview of studies on ways to utilise CBSWs,highlighting the primary avenues of CBSWs resource utilization which are mainly from the fields of chemical materials,metallurgy and agriculture.Furthermore,a comparative evaluation of the various methods for CBSWs resource recovery is conducted,outlining their respective advantages and disadvantages.The future development of CBSWs recycling processes is also discussed.The review concludes that while there is a growing need for attention in CBSWs recycling,its utilization will involve a combination of both large-scale treatment and refinement processes.The paper aims to offer references and insights for the effective utilization and environmental protection of CBSWs.Future direction will focus on the collaborative utilization of CBSWs,emphasizing on the combination of large-scale and high-value utilization.In addition,there is a need to establish a comprehensive database based on on-site production practices,explore on-site solutions to reduce transportation costs,and improve physicochemical properties during the production process.展开更多
Aiming at mitigating the high risks associated with conventional explosive blasting,this study developed a safe directional fracturing technique,i.e.instantaneous expansion with a single fracture(IESF),using a coal-ba...Aiming at mitigating the high risks associated with conventional explosive blasting,this study developed a safe directional fracturing technique,i.e.instantaneous expansion with a single fracture(IESF),using a coal-based solid waste expanding agent.First,the mechanism of directional fracturing blasting by the IESF was analyzed,and the criterion of directional crack initiation was established.On this basis,laboratory experiments and numerical simulations were conducted to systematically evaluate the directional fracturing blasting performance of the IESF.The results indicate that the IESF presents an excellent directional fracturing effect,with average surface undulation differences ranging from 8.1 mm to 22.7 mm on the fracture surfaces.Moreover,during concrete fracturing tests,the stresses and strains in the fracturing direction are measured to be 2.16-3.71 times and 8 times larger than those in the nonfracturing direction,respectively.Finally,the IESF technique was implemented for no-pillar mining with gob-side entry retaining through roof cutting and pressure relief in an underground coal mine.The IESF technique effectively created directional cracks in the roof without causing severe roadway deformation,achieving an average cutting rate and maximum roadway deformation of 94%and 197 mm,respectively.These on-site test results verified its excellent directional rock fracturing performance.The IESF technique,which is safe,efficient,and green,has considerable application prospects in the field of rock mechanics and engineering.展开更多
Although graphite(G)materials dominate the commercial lithium-ion battery(LIBs)anode market due to their excellent overall performance,their limited rate performance and cycle life hinder applications in highperforman...Although graphite(G)materials dominate the commercial lithium-ion battery(LIBs)anode market due to their excellent overall performance,their limited rate performance and cycle life hinder applications in highperformance fields.To improve the cycling and rate performance of graphite anodes,this study first employed economical and eco-friendly tannic acid(TA)as a carbon coating precursor to coat graphite surfaces viaπ-πstacking interactions.In an oxygen-rich alkaline environment,tannic acid undergoes oxidation polymerization and crosslinks with formaldehyde to form a polymer matrix that coats the graphite surface.After subsequent carbonization,carbon-coated graphite material(G@C)was successfully synthesized.Carbon coatings on graphite effectively lower LIB resistance,enhance lithium-ion diffusion,and prevent exfoliation during cycling,thereby significantly boosting rate performance and prolonging the cycle life of graphite.After 500 cycles at 2C,the specific capacity of G@C was 103.7 mAh g^(-1),with a retention of 89%.However,G exhibited only 68.7 mAh g^(-1) and 85%retention under identical conditions.This carbon-coated graphite modification strategy offers a novel,green,and economical approach for designing and tailoring graphite anode materials for lithium-ion batteries with long cycle life and high rate.展开更多
We adopted the solution impregnation route with aluminum dihydrogen phosphate solution as liquid medium for effective surface modification on graphite substrate.The mass ratio of graphite to Al(H_(2)PO_(4))_(3) change...We adopted the solution impregnation route with aluminum dihydrogen phosphate solution as liquid medium for effective surface modification on graphite substrate.The mass ratio of graphite to Al(H_(2)PO_(4))_(3) changed from 0.5:1 to 4:1,and the impregnation time changed from 1 to 7 h.The typical composite phase change thermal storage materials doped with the as-treated graphite were fabricated using form-stable technique.To investigate the oxidation and anti-oxidation behavior of the impregnated graphite at high temperatures,the samples were put into a muffle furnace for a cyclic heat test.Based on SEM,EDS,DSC techniques,analyses on the impregnated technique suggested an optimized processing conditions of a 3 h impregnation time with the ratio of graphite:Al(H_(2)PO_(4))_(3) as 1:3 for graphite impregnation treatment.Further investigations on high-temperature phase change heat storage materials doped by the treated graphite suggested excellent oxidation resistance and thermal cycling performance.展开更多
Magnesium potassium phosphate cement(MKPC)coatings exhibit potential for carbon steel protection but face challenges in practical application due to the preparation process and properties.This study develops flake gra...Magnesium potassium phosphate cement(MKPC)coatings exhibit potential for carbon steel protection but face challenges in practical application due to the preparation process and properties.This study develops flake graphite(FG)-modified MKPC coatings via spraying process,investigating the effects of FG size and dosage on phase composition,microstructure,mechanical properties,corrosion protection,and thermal conductivity.Results show that a low FG dosage(5 wt%)synergistically optimizes multifunctional performance.Compared to unmodified MKPC,FG2-1 exhibited exceptional impact resistance,associated with a 57%reduction in corrosion current density(icorr),a 356.3% increase in low-frequency impedance modulus(Z_(0.01 Hz))and a 37% increase in thermal conductivity.However,the coating with a high FG dosage(15 wt%)degraded performance due to defect accumulation and reduced crystallinity of KMgPO_(4)·6H_(2)O.This work advances the rational design of multifunctional inorganic coatings for extreme service environments requiring coupled corrosion protection and thermal management.展开更多
High-performance graphite materials have important roles in aerospace and nuclear reactor technologies because of their outstanding chemical stability and high-temperature performance.Their traditional production meth...High-performance graphite materials have important roles in aerospace and nuclear reactor technologies because of their outstanding chemical stability and high-temperature performance.Their traditional production method relies on repeated impregnation-carbonization and graphitization,and is plagued by lengthy preparation cycles and high energy consumption.Phase transition-assisted self-pressurized selfsintering technology can rapidly produce high-strength graphite materials,but the fracture strain of the graphite materials produced is poor.To solve this problem,this study used a two-step sintering method to uniformly introduce micro-nano pores into natural graphite-based bulk graphite,achieving improved fracture strain of the samples without reducing their density and mechanical properties.Using natural graphite powder,micron-diamond,and nano-diamond as raw materials,and by precisely controlling the staged pressure release process,the degree of diamond phase transition expansion was effectively regulated.The strain-to-failure of the graphite samples reached 1.2%,a 35%increase compared to samples produced by fullpressure sintering.Meanwhile,their flexural strength exceeded 110 MPa,and their density was over 1.9 g/cm^(3).The process therefore produced both a high strength and a high fracture strain.The interface evolution and toughening mechanism during the two-step sintering process were investigated.It is believed that the micro-nano pores formed have two roles:as stress concentrators they induce yielding by shear and as multi-crack propagation paths they significantly lengthen the crack propagation path.The two-step sintering phase transition strategy introduces pores and provides a new approach for increasing the fracture strain of brittle materials.展开更多
CeO_(2) based semiconductor are widely used in solar-driven photothermal catalytic dry reforming of methane(DRM)reaction,but still suffer from low activity and low light utilization efficiency.This study developed gra...CeO_(2) based semiconductor are widely used in solar-driven photothermal catalytic dry reforming of methane(DRM)reaction,but still suffer from low activity and low light utilization efficiency.This study developed graphite-CeO_(2) interfaces to enhance solar-driven photothermal catalytic DRM.Compared with carbon nanotubes-modified CeO_(2)(CeO_(2)-CNT),graphite-modified CeO_(2)(CeO_(2)-GRA)constructed graphite-CeO_(2) interfaces with distortion in CeO_(2),leading to the formation abundant oxygen vacancies.These graphite-CeO_(2) interfaces with oxygen vacancies enhanced optical absorption and promoted the generation and separation of photogenerated carriers.The high endothermic capacity of graphite elevated the catalyst surface temperature from 592.1−691.3℃,boosting light-to-thermal conversion.The synergy between photogenerated carriers and localized heat enabled Ni/CeO_(2)-GRA to achieve a CO production rate of 9985.6 mmol/(g·h)(vs 7192.4 mmol/(g·h)for Ni/CeO_(2))and a light-to-fuel efficiency of 21.8%(vs 13.8%for Ni/CeO_(2)).This work provides insights for designing graphite-semiconductor interfaces to advance photothermal catalytic efficiency.展开更多
Based on the service characteristics of fuel elements for molten salt reactors,they need to have a high power density,resistance to coolant infiltration,and excellent thermodynamic properties.To solve the problem of t...Based on the service characteristics of fuel elements for molten salt reactors,they need to have a high power density,resistance to coolant infiltration,and excellent thermodynamic properties.To solve the problem of the graphite used in the fuel element for these reactors being susceptible to molten salt infiltration,carbon black(CB)was added to increase the density of the graphite,and a fuel element(TRISO(tri-structural isotropic)fuel particles were randomly distributed in the modified graphite matrix)was prepared by cold isostatic pressing process.An out-of-pile performance study shows that the densification and pore structure of the modified graphite matrix were improved,as was the resistance to molten salt infiltration.The median pore size of the modified graphite was reduced from 673 to 433 nm and the threshold pressure for molten salt(FLiBe,66%(molar fraction)LiF and 34%BeF_(2))infiltration was increased from 0.88 to 1.37 MPa.The isotropic CB made the graphite matrix less anisotropic,while its thermal conductivity and compressive strength were reduced due to the difficult graphitization of CB.Fuel elements containing 20%(volume fraction)TRISO particles were prepared.Numerical simulations show that the power and temperature distribution of the fuel were in line with the design requirements.The modified graphite matrix had a higher density,smaller pores,a lower anisotropy and a greater resistance to FLiBe infiltration.展开更多
基金supported by the National Key Research and Development Program of China(Nos.2023YFC3903900 and 2023YFC3903904)the National Natural Science Foundation Youth Foundation of China(No.52404356)the China Baowu Low Carbon Metallurgy Innovation Foundation(No.BWLCF202216)。
文摘Phosphorus tends to migrate into metallic iron during the direct reduction of high-phosphorus oolitic iron ore,leading to undesirable phosphorus enrichment in metallic iron.However,the underlying reduction and migration mechanisms remain poorly understood.Phosphorus behavior during coal-based reduction was systematically investigated through theoretical modeling and experimental approaches.Thermodynamic analysis revealed that the carbon reduction of solid Ca_(3)(PO_(4))_(2)to gaseous P_(2)requires temperatures exceeding 1400℃.Notably,this threshold significantly decreases to 1130.5℃in the presence of SiO_(2)and Al_(2)O_(3).Further investigations demonstrated that Ca_(3)(PO_(4))_(2)co-reduces with Fe_(x)O_(γ)in the presence of SiO_(2)-Al_(2)O_(3)-Fe_(x)O_(γ),forming Fe_(3)P(instead of gaseous P_(2))at a markedly lower temperature of 778.7℃.Mechanistic studies indicate that the inherent thermal stability of Ca_(3)(PO_(4))_(2)inhibits the generation of reactive[P_(2)O_(5)].However,SiO_(2)-Al_(2)O_(3)coexistence destabilizes Ca_(3)(PO_(4))_(2)while exponentially enhancing[P_(2)O_(5)]activity.This synergistic effect dramatically promotes the phosphorus mineral reduction.Characterization confirmed that Ca_(3)(PO_(4))_(2)migrated into the slag phase(4FeO·Al_(2)O_(3)·3SiO_(2)·CaO·P_(2)O_(5)).Subsequently,the reactive P_(2)O_(5)in slag is reduced with metallic iron to form Fe_(3)P,which further dissolves into theα-Fe matrix through solid-state diffusion,ultimately generating Fe-P solid solutions.
基金supported by European Union's Horizon Europe,UK Research and Innovation(UKRI).
文摘Graphite,encompassing both natural graphite and synthetic graphite,and graphene,have been extensively utilized and investigated as anode materials and additives in lithium-ion batteries(LIBs).In the pursuit of carbon neutrality,LIBs are expected to play a pivotal role in reducing CO_(2)emissions by decreasing reliance on fossil fuels and enabling the integration of renewable energy sources.Owing to their technological maturity and exceptional electrochemical performance,the global production of graphite and graphene for LIBs is projected to continue expanding.Over the past decades,numerous researchers have concentrated on reducing the material and energy input whilst optimising the electrochemical performance of graphite and graphene,through novel synthesis methods and various modifications at the laboratory scale.This review provides a comprehensive examination of the manufacturing methods,environmental impact,research progress,and challenges associated with graphite and graphene in LIBs from an industrial perspective,with a particular focus on the carbon footprint of production processes.Additionally,it considers emerging challenges and future development directions of graphite and graphene,offering significant insights for ongoing and future research in the field of green LIBs.
基金supported by the National Key Research and Development Program of China(2024YFA1612900)the National Natural Science Foundation of China(Grant No.52103365 and No.12375270)the Guangdong Innovative and Entrepreneurial Research Team Program,China(Grant No.2021ZT09L227).
文摘Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,understanding the oxidation behavior of nuclear graphite is essential for reactor safety.The influence of oxidation involves multiple factors,including temperature,sample size,oxidant,impurities,filler type and size,etc.The size of the filler particles plays a crucial role in this study.Five ultrafine-and superfine-grained nuclear graphite samples(5.9-34.4μm)are manufactured using identical raw materials and manufacturing processes.Isothermal oxidation tests conducted at 650℃-750℃ are used to study the oxidation behavior.Additionally,comprehensive characterization is performed to analyze the crystal structure,surface morphology,and nanoscale to microscale pore structure of the samples.Results indicate that oxidation behavior cannot be predicted solely based on filler grain size.Reactive site concentration,characterized by active surface area,dominates the chemical reaction kinetics,whereas pore tortuosity,quantified by the structural parameterΨ,plays a key role in regulating oxidant diffusion.These findings clarify the dual role of microstructure in oxidation mechanisms and establish a theoretical and experimental basis for the design of high-performance nuclear graphite capable of long-term service in high-temperature gas-cooled reactors.
基金funded by the National Key Research and Development Program of China(grant no.2023YFB3809300)Longzhong Laboratory Research Project(grant no.2024KF-20)+4 种基金the National Science Foundation of China(grant no.52373306)the Key Research and Development Program Project of Hubei Province(grant no.2023BAB140,2024BAA013)the Natural Science Foundation of Hubei Province(grant no.2023AFA053)the Key Research and Development Program of Henan Province(grant no.251111240100)the Postdoctoral Fellowship Program of CPSF(grant no.GZB20230553)。
文摘The extensive application of lithium-ion batteries in electric vehicles has led to a torrential surge of endof-life batteries.As the dominant anode material,graphite's environmental and resource costs in production highlight the necessity of recycling spent graphite(SG).However,SG recycling technologies remain markedly underdeveloped compared to the cathode recovery status,due to perceived lower economic value.This review provides an in-depth analysis of the current SG growth trend and highlights the cost accounting for graphite recycling and the significant importance of advanced recycling technologies.By examining the failure mechanisms of graphite,various recycling and upcycling technologies in both practical application and fundamental research are fully discussed,in terms of the regeneration principle,recycling effect,strengths,and limitations of each method.Furthermore,the multi-purpose applications of recycled graphite beyond LIB anodes are explored to enhance its high-value properties.Finally,the prospects of SG recycling and large-scale application challenges are presented,including economic feasibility,process optimization,and regulatory restrictions.This review provides a comprehensive overview of developments in SG recycling strategies,offering valuable insights for narrowing the gap between fundamental research and practical applications.
基金supported by the National Natural Science Foundation of China(Grant No.52322708)and(Grant No.52441702).
文摘The thin zinc anode in zinc-ion batteries offers the advantages of high energy density and low cost.However,issues such as uneven zinc stripping and dendrite growth significantly reduce the cycling life and safety of the battery.To address this,this study proposes a novel zinc anode construction strategy based on a graphite paper substrate,which significantly improves the reversibility of zinc deposition/stripping by regulating the distribution of the interfacial electric field.Compared to traditional copper foil-based substrates(Cu foil@Zn),the zinc deposition layer formed on the graphite paper substrate exhibits a more uniform morphology and superior electrochemical performance.Experimental results show that the Gr paper@Zn anode surface presents a brighter metallic luster,with a mass reduction of approximately 16%compared to the Cu foil@Zn.SEM and XRD analyses confirm that the graphite paper substrate promotes the formation of a uniform and dense Zn(002)crystal face orientation deposition layer,while the Cu foil substrate forms a columnar crystal structure with Zn(101)orientation.Furthermore,the Zn||I_(2) full battery assembled with Gr paper@Zn retains 75.1%of its initial capacity after 10000 cycles at a high current rate of 10 C.The Zn||I_(2) large-area pouch battery maintains 81.2%of its capacity after 800 cycles at a current of 0.8 A.More importantly,the assembled Zn||I_(2) multilayer pouch battery delivers an Ah-level capacity(1.67 Ah)and maintains 89.9%of its capacity after 100 cycles.This work provides new interface engineering insights for the design of high-performance thin zinc anodes.
基金supported by grants from Natural Science Foundation of Guangdong Province(Grant No.2021A1515012335)National Natural Science Foundation of China(NSFC)(Grant No.11274400)+2 种基金Pearl River S&T Nova Program of Guangzhou(Grant No.201506010059)State Key Laboratory of Optoelectronic Materials and Technologies(Sun Yat-Sen University)(Grant No.OEMT-2024-ZTS-01)State Key Laboratory of High Field Laser Physics(Shanghai Institute of Optics and Fine Mechanics)。
文摘Laser-induced periodic surface structures(LIPSS)have gained increasing attention in the field of micro/nano fabrication,although achieving sub-100-nm period LIPSS with high uniformity remains a significant challenge.In this work,towards deep-subwavelength LIPSS on highly oriented pyrolytic graphite(HOPG),we demonstrate that ultra-uniform nanogratings of sub-50-nm periods and near-10-nm groove widths can be stably prepared via 800-nm femtosecond laser scanning irradiation with a high-NA objective lens under water immersion.The resulting nanogratings of strong polarization dependence,exhibiting exceptional surface flatness,period stability,and structural integrity,tend to appear at near-damage-threshold fluence regime with an appropriate effective pulse number.It turns out that the water immersion condition can significantly reduce the thermal effects of femtosecond laser ablation on HOPG,and thus via a mild,incubation-like scanning ablation process occurring in the nanogrooves with a continuous or jumping manner,this deep-subwavelength grating can achieve robust elongation growth,ensuring its long-range uniformity as well as minimal deposited debris and structural defects.Interestingly,the different incubation extension mechanisms for the mutually perpendicular and parallel settings between scanning direction and laser polarization bring not only distinct effective-pulse-number windows and somewhat different grating qualities,but also different extension stabilities in nanograting stitching via overlapping scanning lines and thus the optimal scanning strategy of parallel setting for large-area processing.In short,this study presents a convenient laser-processing approach for high precision fabrication of sub-50-nm gratings on HOPG,which would provide new insights into micro/nano-fabrication for optoelectronic metasurfaces and physics of the interaction between ultrafast laser and graphite.
基金supported by the National Natural Science Foundation of China(Project Nos.22372051 and 21406044)Australian Research Council/Discovery Early Career Researcher Award(DECRA)funding scheme(DE230100180).
文摘The impurities and structural cracks within spent graphite(SG)in lithium-ion battery anodes hamper lithium-ion intercalation and extraction after successive charge-discharge operations,thereby yielding poor lithium storage behavior.Herein,low-viscosity natural deep eutectic solvent(NDES)composed of citric acid(CA)and betaine hydrochloride was employed to remove the organic impurities in SG via a one-step benign process involving hydrogen bonds and electrostatic interactions at mild conditions of 80℃ for only 30 min.After NDES leaching under optimal conditions(molar ratio of CA to betaine hydrochloride=3:1,80℃,30 min),the as-obtained sample(denoted as BG-3)exhibited an extremely clean surface,moderately enlarged interlayer distance,and more structural defects at the edge of graphite lamellae.These features facilitated lithium-ion intercalation and withdrawal,bestowing BG-3 with remarkable activity in lithium-ion battery(LIB)recycling.For instance,BG-3 delivered a capacity of 438.6 mAh g^(-1) at a current density of 0.1 A g^(-1).Its capacity retention reached 97.9%,accompanied by a Coulombic efficiency of 99.1%,upon completing 100 cycles.A molecular dynamics simulation was employed to illuminate the regeneration mechanism for anode graphite from a theoretical perspective.It revealed that NDES exhibits lower binding energy with all contaminants compared to graphite,which is favorable for NDES to eliminate impurities from graphite surfaces.This study unveils a method of recycling SG from retired LIBs by a short eco-friendly process,providing a competitive blueprint to address the shortage of battery-grade anode graphite and to achieve carbon neutrality.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)(No.NRF-2021M3H4A1A02048529)the Ministry of Trade,Industry and Energy(MOTIE)of the Korean government under grant No.RS-2022-00155854support from the DGIST Supercomputing and Big Data Center.
文摘To enhance the electrochemical performance of lithium-ion battery anodes with higher silicon content,it is essential to engineer their microstructure for better lithium-ion transport and mitigated volume change as well.Herein,we suggest an effective approach to control the micropore structure of silicon oxide(SiO_(x))/artificial graphite(AG)composite electrodes using a perforated current collector.The electrode features a unique pore structure,where alternating high-porosity domains and low-porosity domains markedly reduce overall electrode resistance,leading to a 20%improvement in rate capability at a 5C-rate discharge condition.Using microstructure-resolved modeling and simulations,we demonstrate that the patterned micropore structure enhances lithium-ion transport,mitigating the electrolyte concentration gradient of lithium-ion.Additionally,perforating current collector with a chemical etching process increases the number of hydrogen bonding sites and enlarges the interface with the SiO_(x)/AG composite electrode,significantly improving adhesion strength.This,in turn,suppresses mechanical degradation and leads to a 50%higher capacity retention.Thus,regularly arranged micropore structure enabled by the perforated current collector successfully improves both rate capability and cycle life in SiO_(x)/AG composite electrodes,providing valuable insights into electrode engineering.
基金supported by the National Natural Science Foundation of China(No.52274346).
文摘Waste graphitization cathode carbon blocks are a type of hazardous solid waste generated during the aluminum electrolysis process,and their proper disposal is a key step in the resource utilization of discarded graphite.This study utilizes the porous“defect advantage”of a cathode carbon block matrix to prepare silicon-doped and asphalt-coated detoxified and purified waste graphitization cathode carbon blocks for use as high-performance silicon/carbon composite anode materials.The results show that the uniformly silicondoped silicon/carbon composite material features a unique amorphous carbon-encapsulated“locked silicon”structure,which effectively addresses issues such as cathode volume expansion,excessive growth of the solid electrolyte interphase(SEI)film,and poor electrical contact between active materials.Consequently,electrochemical performance is enhanced.After assembly in a half-cell,the PSCC/10%Si@C(purified waste graphitization cathode carbon/10%Si@C)material exhibits optimal electrochemical stability,with an initial charging specific capacity of 514.5 mAh/g at 0.1 C(1 C=170 mA/g)and a capacity retention rate of 95.1%after 100 cycles.At a charge rate of 2.0 C,a specific capacity of 216.9 mAh/g is achieved.This technology provides a new pathway for the economical and high-value utilization of waste cathode carbon blocks and the development of low-cost,high-performance anode materials.
基金supported by the National Key R&D Program of China(Grant No.2023YFA1406200)the National Science Foundation of China(Grant No.U2032215)+1 种基金Jilin Province Major Science and Technology Program,China(Grant No.20240211002GX)the Science and Technology Development Project of Jilin Province(Grant No.SKL202402004).
文摘Graphite and hexagonal boron nitride(h-BN),despite their structural similarity,exhibit opposing electronic properties,namely,metallic conductivity and wide-bandgap insulation,respectively.In recent years,graphene-h-BN heterostructures have attracted significant research interest,with the resulting hybrid B-C-N atomic-layer systems exhibiting distinctive electronic properties.Notably,interface effects play a decisive role in governing the performance of these heterostructures.Nevertheless,owing to the lack of high-quality composites,the interfacial structure in B-C-N materials and the correlation with critical properties such as charge transport and band structure modulation are not fully clear.Here,we report the direct synthesis of a millimeter-sized hexagonal B-C-N composite via a solvent method under high-pressure and high-temperature conditions.Structural characterization reveals that the synthesized B-C-N composite contains isolated graphite and h-BN.Compared with pure h-BN,the B-C-N composite has a narrower bandgap and shows a pronounced photoelectric response in the visible light region.More interestingly,we find a graphite-like B-C compound with a thickness of about 30 nm at the graphite-h-BN interface,which forms Schottky junctions with graphite,thus realizing rectification properties.Our findings provide a method for synthesizing highquality B-C-N composites and offer new insights into the structure of the graphite-h-BN interface.
基金Project supported by the National Natural Science Foundation of China.
文摘Graphite formed in response to thermal contact metamorphism of coal bodies with magmatic intrusion is referred to as coal-based graphite. The first-order Raman spectrum of all the coal-based graphite taken from the Lutang area, Hunan Province exhibits a single Raman band near 1585cm-1, which comes directly from in-plane vibration of aromatic layer assigned to the E2g mode. Their Raman band of the structural defect in-plane can be divided into 2 types: one is the defect band (D peak) caused by the primary structural delect of the graphite in graphitization process, which is called D2-peak located at 1 360 cm-1; the other is the defect bank caused by the secondary structural defect in the graphite subject to tectonic shearing stress, which is called D1 peak located at 1370cm-1. The second Raman spectrum of the coal-based graphite shows three-dimensional lattice degree in the coal-based graphite. If the three-dimensional lattice of graphite is not well developed, it exhibits only a band of 2700cm-1; if the three-dimensional lattice of the coal-based graphite has been formed, the band of 2700cm-1 is split into two Raman bands, which are respectively located near 2681 cm-1 and near 2726cm-1, Raman band intensity ratio increases synchronously as the ordering degree of three-dimensional lattice increases regularly.
文摘Lithium-ion batteries(LIBs)are an electrochemical energy storage technology that has been widely used for portable electrical devices,electric vehicles,and grid storage,etc.To satisfy the demand for user convenience especially for electric vehicles,the development of a fast-charging technology for LIBs has become a critical focus.In commercial LIBs,the slow kinetics of Li+intercalation into the graphite anode from the electrolyte solution is known as the main restriction for fast-charging.We summarize the recent advances in obtaining fast-charging graphite-based anodes,mainly involving modifications of the electrolyte solution and graphite anode.Specifically,strategies for increasing the ionic conductivity and regulating the Li+solvation/desolvation state in the electrolyte solution,as well as optimizing the fabrication and the intrinsic activity of graphite-based anodes are discussed in detail.This review considers practical ways to obtain fast Li+intercalation kinetics into a graphite anode from the electrolyte as well as analysing progress in the commercialization of fast-charging LIBs.
基金supported by the following:“National Natural Science Foundation of China”(22478231)“Natural Science Foundation of Henan”(242300421449)“Fundamental Research Program of Shanxi Province”(202403021221011).
文摘Coal-based soild wastes(CBSWs)are industrial byproducts that can be harmful to the environment.The exploitation and utilization of CBsWs offer societal advantages such as resource conservation,pollution reduction,and cost-effective production.However,environmentally sustainable management remains a worldwide challenge due to the substantial production volume and limited disposal capacity of CBSWs.The physicochemical properties and utilization of CBSWs are summarized,including fly ash,coal gangue and coal gasification slag.It also presents the current global applications status of CBSWs resources and examines market supply and demand.Subsequently,the paper provides an overview of studies on ways to utilise CBSWs,highlighting the primary avenues of CBSWs resource utilization which are mainly from the fields of chemical materials,metallurgy and agriculture.Furthermore,a comparative evaluation of the various methods for CBSWs resource recovery is conducted,outlining their respective advantages and disadvantages.The future development of CBSWs recycling processes is also discussed.The review concludes that while there is a growing need for attention in CBSWs recycling,its utilization will involve a combination of both large-scale treatment and refinement processes.The paper aims to offer references and insights for the effective utilization and environmental protection of CBSWs.Future direction will focus on the collaborative utilization of CBSWs,emphasizing on the combination of large-scale and high-value utilization.In addition,there is a need to establish a comprehensive database based on on-site production practices,explore on-site solutions to reduce transportation costs,and improve physicochemical properties during the production process.
基金supported by the National Natural Science Foundation of China(Grant No.52404155)State Key Laboratory of Mining Disaster Prevention and Control(Shandong University of Science and Technology)+1 种基金Ministry of Education(Grant No.JMDPC202402)supported by the opening project of State Key Laboratory of Explosion Science and Safety Protection(Beijing Institute of Technology).The opening project number is KFJJ24-20M.
文摘Aiming at mitigating the high risks associated with conventional explosive blasting,this study developed a safe directional fracturing technique,i.e.instantaneous expansion with a single fracture(IESF),using a coal-based solid waste expanding agent.First,the mechanism of directional fracturing blasting by the IESF was analyzed,and the criterion of directional crack initiation was established.On this basis,laboratory experiments and numerical simulations were conducted to systematically evaluate the directional fracturing blasting performance of the IESF.The results indicate that the IESF presents an excellent directional fracturing effect,with average surface undulation differences ranging from 8.1 mm to 22.7 mm on the fracture surfaces.Moreover,during concrete fracturing tests,the stresses and strains in the fracturing direction are measured to be 2.16-3.71 times and 8 times larger than those in the nonfracturing direction,respectively.Finally,the IESF technique was implemented for no-pillar mining with gob-side entry retaining through roof cutting and pressure relief in an underground coal mine.The IESF technique effectively created directional cracks in the roof without causing severe roadway deformation,achieving an average cutting rate and maximum roadway deformation of 94%and 197 mm,respectively.These on-site test results verified its excellent directional rock fracturing performance.The IESF technique,which is safe,efficient,and green,has considerable application prospects in the field of rock mechanics and engineering.
基金supported by the Science and Technology Projects of the State Grid Corporation of China(5500-202323102A-1-1-ZN).
文摘Although graphite(G)materials dominate the commercial lithium-ion battery(LIBs)anode market due to their excellent overall performance,their limited rate performance and cycle life hinder applications in highperformance fields.To improve the cycling and rate performance of graphite anodes,this study first employed economical and eco-friendly tannic acid(TA)as a carbon coating precursor to coat graphite surfaces viaπ-πstacking interactions.In an oxygen-rich alkaline environment,tannic acid undergoes oxidation polymerization and crosslinks with formaldehyde to form a polymer matrix that coats the graphite surface.After subsequent carbonization,carbon-coated graphite material(G@C)was successfully synthesized.Carbon coatings on graphite effectively lower LIB resistance,enhance lithium-ion diffusion,and prevent exfoliation during cycling,thereby significantly boosting rate performance and prolonging the cycle life of graphite.After 500 cycles at 2C,the specific capacity of G@C was 103.7 mAh g^(-1),with a retention of 89%.However,G exhibited only 68.7 mAh g^(-1) and 85%retention under identical conditions.This carbon-coated graphite modification strategy offers a novel,green,and economical approach for designing and tailoring graphite anode materials for lithium-ion batteries with long cycle life and high rate.
基金Funded by Scientific and Technological Innovation Project of Carbon Emission Peak and Carbon Neutrality of Jiangsu Province(No.BE2022028-4)。
文摘We adopted the solution impregnation route with aluminum dihydrogen phosphate solution as liquid medium for effective surface modification on graphite substrate.The mass ratio of graphite to Al(H_(2)PO_(4))_(3) changed from 0.5:1 to 4:1,and the impregnation time changed from 1 to 7 h.The typical composite phase change thermal storage materials doped with the as-treated graphite were fabricated using form-stable technique.To investigate the oxidation and anti-oxidation behavior of the impregnated graphite at high temperatures,the samples were put into a muffle furnace for a cyclic heat test.Based on SEM,EDS,DSC techniques,analyses on the impregnated technique suggested an optimized processing conditions of a 3 h impregnation time with the ratio of graphite:Al(H_(2)PO_(4))_(3) as 1:3 for graphite impregnation treatment.Further investigations on high-temperature phase change heat storage materials doped by the treated graphite suggested excellent oxidation resistance and thermal cycling performance.
基金National Key Research and Development Program of China(2024YFB3714804)National Natural Science Foundation of China(52171277)+1 种基金Baima Lake Laboratory Joint Funds of the Zhejiang Provincial Natural Science Foundation of China(LBMHZ24E020001)Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering(2022SZ-TD006).
文摘Magnesium potassium phosphate cement(MKPC)coatings exhibit potential for carbon steel protection but face challenges in practical application due to the preparation process and properties.This study develops flake graphite(FG)-modified MKPC coatings via spraying process,investigating the effects of FG size and dosage on phase composition,microstructure,mechanical properties,corrosion protection,and thermal conductivity.Results show that a low FG dosage(5 wt%)synergistically optimizes multifunctional performance.Compared to unmodified MKPC,FG2-1 exhibited exceptional impact resistance,associated with a 57%reduction in corrosion current density(icorr),a 356.3% increase in low-frequency impedance modulus(Z_(0.01 Hz))and a 37% increase in thermal conductivity.However,the coating with a high FG dosage(15 wt%)degraded performance due to defect accumulation and reduced crystallinity of KMgPO_(4)·6H_(2)O.This work advances the rational design of multifunctional inorganic coatings for extreme service environments requiring coupled corrosion protection and thermal management.
基金Natural Science Foundation of Shanghai(24ZR1400800)he Natural Science Foundation of China(U23A20685,52073058,91963204)+1 种基金the National Key R&D Program of China(2021YFB3701400)Shanghai Sailing Program(23YF1400200)。
文摘High-performance graphite materials have important roles in aerospace and nuclear reactor technologies because of their outstanding chemical stability and high-temperature performance.Their traditional production method relies on repeated impregnation-carbonization and graphitization,and is plagued by lengthy preparation cycles and high energy consumption.Phase transition-assisted self-pressurized selfsintering technology can rapidly produce high-strength graphite materials,but the fracture strain of the graphite materials produced is poor.To solve this problem,this study used a two-step sintering method to uniformly introduce micro-nano pores into natural graphite-based bulk graphite,achieving improved fracture strain of the samples without reducing their density and mechanical properties.Using natural graphite powder,micron-diamond,and nano-diamond as raw materials,and by precisely controlling the staged pressure release process,the degree of diamond phase transition expansion was effectively regulated.The strain-to-failure of the graphite samples reached 1.2%,a 35%increase compared to samples produced by fullpressure sintering.Meanwhile,their flexural strength exceeded 110 MPa,and their density was over 1.9 g/cm^(3).The process therefore produced both a high strength and a high fracture strain.The interface evolution and toughening mechanism during the two-step sintering process were investigated.It is believed that the micro-nano pores formed have two roles:as stress concentrators they induce yielding by shear and as multi-crack propagation paths they significantly lengthen the crack propagation path.The two-step sintering phase transition strategy introduces pores and provides a new approach for increasing the fracture strain of brittle materials.
文摘CeO_(2) based semiconductor are widely used in solar-driven photothermal catalytic dry reforming of methane(DRM)reaction,but still suffer from low activity and low light utilization efficiency.This study developed graphite-CeO_(2) interfaces to enhance solar-driven photothermal catalytic DRM.Compared with carbon nanotubes-modified CeO_(2)(CeO_(2)-CNT),graphite-modified CeO_(2)(CeO_(2)-GRA)constructed graphite-CeO_(2) interfaces with distortion in CeO_(2),leading to the formation abundant oxygen vacancies.These graphite-CeO_(2) interfaces with oxygen vacancies enhanced optical absorption and promoted the generation and separation of photogenerated carriers.The high endothermic capacity of graphite elevated the catalyst surface temperature from 592.1−691.3℃,boosting light-to-thermal conversion.The synergy between photogenerated carriers and localized heat enabled Ni/CeO_(2)-GRA to achieve a CO production rate of 9985.6 mmol/(g·h)(vs 7192.4 mmol/(g·h)for Ni/CeO_(2))and a light-to-fuel efficiency of 21.8%(vs 13.8%for Ni/CeO_(2)).This work provides insights for designing graphite-semiconductor interfaces to advance photothermal catalytic efficiency.
文摘Based on the service characteristics of fuel elements for molten salt reactors,they need to have a high power density,resistance to coolant infiltration,and excellent thermodynamic properties.To solve the problem of the graphite used in the fuel element for these reactors being susceptible to molten salt infiltration,carbon black(CB)was added to increase the density of the graphite,and a fuel element(TRISO(tri-structural isotropic)fuel particles were randomly distributed in the modified graphite matrix)was prepared by cold isostatic pressing process.An out-of-pile performance study shows that the densification and pore structure of the modified graphite matrix were improved,as was the resistance to molten salt infiltration.The median pore size of the modified graphite was reduced from 673 to 433 nm and the threshold pressure for molten salt(FLiBe,66%(molar fraction)LiF and 34%BeF_(2))infiltration was increased from 0.88 to 1.37 MPa.The isotropic CB made the graphite matrix less anisotropic,while its thermal conductivity and compressive strength were reduced due to the difficult graphitization of CB.Fuel elements containing 20%(volume fraction)TRISO particles were prepared.Numerical simulations show that the power and temperature distribution of the fuel were in line with the design requirements.The modified graphite matrix had a higher density,smaller pores,a lower anisotropy and a greater resistance to FLiBe infiltration.
