A numerical technique of the target-region locating （TRL） solver in conjunction with the wave-front method is presented for the application of the finite element method （FEM） for 3-D electromagnetic computation. F...A numerical technique of the target-region locating （TRL） solver in conjunction with the wave-front method is presented for the application of the finite element method （FEM） for 3-D electromagnetic computation. First, the principle of TRL technique is described. Then, the availability of TRL solver for nonlinear application is particularly discussed demonstrating that this solver can be easily used while still remaining great efficiency. The implementation on how to apply this technique in FEM based on magnetic vector potential （MVP） is also introduced. Finally, a numerical example of 3-D magnetostatic modeling using the TRL solver and FEMLAB is given. It shows that a huge computer resource can be saved by employing the new solver.展开更多
High order accurate scheme is highly desirable for Slow computation with shocks. After analysis has been made for the reason of the generation of non-physical oscillations around the shock in numerical computations, a...High order accurate scheme is highly desirable for Slow computation with shocks. After analysis has been made for the reason of the generation of non-physical oscillations around the shock in numerical computations, a third-order, upwind biased, shock capturing scheme was proposed. Also, a new shock fitting method, called pseudo shock fitting method, was suggested, which in principle can be with any order of accuracy. Test cases for one dimensional flows show that the new method is very satisfactory.展开更多
In compact spinning with pneumatic groove,the computational fluid dynamic model,computed with parallel technologies & Fluent 6.3,is developed to simulate the flow field in condensing zone with 3D computational flu...In compact spinning with pneumatic groove,the computational fluid dynamic model,computed with parallel technologies & Fluent 6.3,is developed to simulate the flow field in condensing zone with 3D computational fluid dynamic (CFD) technology.Flowing state,distribution rules of static pressure,and velocity in condensing zone are characterized and analyzed.The results show that the fiber bundle in compact spinning with pneumatic groove is compacted by airflow and the shape of the pneumatic groove,and the static pressure in condensing zone is negative,as well as the velocity of airflow in condensing zone is not zero.The fluctuation frequencies of the static pressure and velocity near the bottom of the pneumatic groove are relatively higher,and the number of the fluctuation is equal to that of the round holes in condensing zone.展开更多
A mathematical model based on the computational fluid dynamics method,heat and mass transfer in porous media and the unreacted shrinking core model for the oxidation reaction of an individual magnetite pellet during p...A mathematical model based on the computational fluid dynamics method,heat and mass transfer in porous media and the unreacted shrinking core model for the oxidation reaction of an individual magnetite pellet during preheating was established.The commercial software COMSOL Multiphysics was used to simulate the change in the oxidation degree of the pellet at different temperatures and oxygen concentrations,and the simulated results were compared with the exper-imental results.The model considered the influence of the exothermic heat of the reaction,and the enthalpy change was added to calculate the heat released by the oxidation.The results show that the oxidation rate on the surface of the pellet is much faster than that of the inside of the pellet.Temperature and oxygen concentration have great influence on the pellet oxidation model.Meanwhile,the exothermic calculation results show that there is a non-isothermal phenomenon inside the pellet,which leads to an increase in temperature inside the single pellet.Under the preheating condition of 873-1273 K(20%oxygen content),the heat released by the pellet oxidation reaction in a chain grate is 7.8×10^(6)-10.8×10^(6) kJ/h,which is very large and needs to be considered in the magnetite pellet oxidation modelling.展开更多
Optimal computational parameters are determined through comparisons of typhoon track for similarity relevant to vdrious sets of computational parameters using a simple quasi-geostrophic barotropic vorticity equations ...Optimal computational parameters are determined through comparisons of typhoon track for similarity relevant to vdrious sets of computational parameters using a simple quasi-geostrophic barotropic vorticity equations model. The result: the Poisson equation is solved for numerical solutions at an iterative accuracy of 1.0 × 10-4 and a time step of 20 min.展开更多
Analytical and numerical computed models are developed for reverse pulse cleaning system of candle ceramic filters. A standard turbulent model is demonstrated suitably to the designing computation of reverse pulse cle...Analytical and numerical computed models are developed for reverse pulse cleaning system of candle ceramic filters. A standard turbulent model is demonstrated suitably to the designing computation of reverse pulse cleaning system from the experimental and one dimensional computational result. The computed results can be used to guide the designing of reverse pulse cleaning system, which is optimum Venturi geometry. From the computed results, the general conclusions and the designing methods are obtained.展开更多
Finite difference method (FDM) was applied to simulate thermal stress recently, which normally needs a long computational time and big computer storage. This study presents two techniques for improving computational s...Finite difference method (FDM) was applied to simulate thermal stress recently, which normally needs a long computational time and big computer storage. This study presents two techniques for improving computational speed in numerical simulation of casting thermal stress based on FDM, one for handling of nonconstant material properties and the other for dealing with the various coefficients in discretization equations. The use of the two techniques has been discussed and an application in wave-guide casting is given. The results show that the computational speed is almost tripled and the computer storage needed is reduced nearly half compared with those of the original method without the new technologies. The stress results for the casting domain obtained by both methods that set the temperature steps to 0.1 ℃ and 10 ℃, respectively are nearly the same and in good agreement with actual casting situation. It can be concluded that both handling the material properties as an assumption of stepwise profile and eliminating the repeated calculation are reliable and effective to improve computational speed, and applicable in heat transfer and fluid flow simulation.展开更多
To invest the condition of ice accretion on the blade used for straight-bladed vertical axis wind turbine （SB-VAWT）, wind tunnel tests were carried out on a blade with NACA0015 airfoil by using a small simple icing ...To invest the condition of ice accretion on the blade used for straight-bladed vertical axis wind turbine （SB-VAWT）, wind tunnel tests were carried out on a blade with NACA0015 airfoil by using a small simple icing wind tunnel. Tests were carried out at some typical attack angles under different wind speeds and flow discharges of a water spray with wind. The icing shape and area on blade surface were recorded and measured, Then the numerical computation was carded out to calculate the lift and drag coefficients of the blade before and after ice accretion according to the experiment result, the effect of icing on the aerodynamic characteristics of blade were discussed.展开更多
The main goal of this paper is to compute the Figure-eight solutions for the planar Newtonian 3-body problem with equal masses by finding the critical points of the functional associated with the motion equations of 3...The main goal of this paper is to compute the Figure-eight solutions for the planar Newtonian 3-body problem with equal masses by finding the critical points of the functional associated with the motion equations of 3-body in plane R2. The algorithm adopted here is the steepest descent method, which is simple but very valid for our problem.展开更多
A detailed mathematical model of a direct internal reforming solid oxide fuel cell(DIR-SOFC) incorporating with simulation of chemical and physical processes in the fuel cell is presented. The model is developed based...A detailed mathematical model of a direct internal reforming solid oxide fuel cell(DIR-SOFC) incorporating with simulation of chemical and physical processes in the fuel cell is presented. The model is developed based on the reforming and electrochemical reaction mechanisms,mass and energy conservation,and heat transfer. A computational fluid dynamics(CFD) method is used for solving the complicated multiple partial differential equations(PDEs) to obtain the numerical approximations. The resulting distributions of chemical species concentrations,temperature and current density in a cross-flow DIR-SOFC are given and analyzed in detail. Further,the influence between distributions of chemical species concentrations,temperature and current density during the simulation is illustrated and discussed. The heat and mass transfer,and the kinetics of reforming and electrochemical reactions have significant effects on the parameter distributions within the cell. The results show the particular characteristics of the DIR-SOFC among fuel cells,and can aid in stack design and control.展开更多
A finite different method is developed to predict the side force on a high speedtrain in a cross-wind at low yaw anglee. The k-εturbulence model with wallfunctions is employed. the solution algorithm is based on curv...A finite different method is developed to predict the side force on a high speedtrain in a cross-wind at low yaw anglee. The k-εturbulence model with wallfunctions is employed. the solution algorithm is based on curvilinearnonorthogonal coordinates,covariant velocity components ,and staggered gridarrangement. The convective fluxes are described by the Power tow Scheme.A highly deformed grid generated with an elliptic grid generator is used aroundthe comero of the cross-section of the train. The results obtained comparepositively with wind tunnel experinients.展开更多
The local time-stepping(LTS)algorithm is an adaptive method that adjusts the time step by selecting suitable intervals for different regions based on the spatial scale of each cell and water depth and flow velocity be...The local time-stepping(LTS)algorithm is an adaptive method that adjusts the time step by selecting suitable intervals for different regions based on the spatial scale of each cell and water depth and flow velocity between cells.The method can be optimized by calculating the maximum power of two of the global time step increments in the domain,allowing the optimal time step to be approached throughout the grid.To verify the acceleration and accuracy of LTS in storm surge simulations,we developed a model to simulate astronomical storm surges along the southern coast of China.This model employs the shallow water equations as governing equations,numerical discretization using the finite volume method,and fluxes calculated by the Roe solver.By comparing the simulation results of the traditional global time-stepping algorithm with those of the LTS algorithm,we find that the latter fit the measured data better.Taking the calculation results of Typhoon Sally in 1996 as an example,we show that compared with the traditional global time-stepping algorithm,the LTS algorithm reduces computation time by 2.05 h and increases computation efficiency by 2.64 times while maintaining good accuracy.展开更多
To analyze the triggering relationship of historical earthquakes to the 2023 Jishishan earthquake and estimate the seismic risk in the adjacent region after the earthquake,we calculate the evolution process of seismic...To analyze the triggering relationship of historical earthquakes to the 2023 Jishishan earthquake and estimate the seismic risk in the adjacent region after the earthquake,we calculate the evolution process of seismic stress generated by 11 earthquakes with MS≥6.0 and 1 earthquake with MS5.7 near the source in the past 100 years.The results show that before the 2023 Jishishan earthquake,the entire Lajishan Northern Edge Fault zone was under the stress shadow generated by the 12 earthquakes.The stress reduction at the 2023 Jishishan earthquake epicenter was approximately 15.1 kPa,and the contribution of this stress shadow mainly comes from the 1920 MS8.5 Haiyuan earthquake.The coseismic stress drop at the epicenter was around-292.1 kPa,and the maximum stress drop for the 2023 Jishishan earthquake was around-346.2 kPa.The Jishishan earthquake increased the stress of the two seismic gaps in the Lajishan Northern Edge Fault by 14.7 kPa and 59.7 k Pa respectively,the stress on the Lajishan Southern Edge Fault zone increased by 10.9 kPa,and the stress on the east section of Xunhua Nanshan Fault increased by 11.1 kPa.These stress increments potentially elevate the seismic hazard along these fault zones.In the future earthquake prevention and disaster reduction,attention should be paid to the seismic risk of these fault zones.展开更多
Semisubmersible naval ships are versatile military crafts that combine the advantageous features of high-speed planing crafts and submarines.At-surface,these ships are designed to provide sufficient speed and maneuver...Semisubmersible naval ships are versatile military crafts that combine the advantageous features of high-speed planing crafts and submarines.At-surface,these ships are designed to provide sufficient speed and maneuverability.Additionally,they can perform shallow dives,offering low visual and acoustic detectability.Therefore,the hydrodynamic design of a semisubmersible naval ship should address at-surface and submerged conditions.In this study,Numerical analyses were performed using a semisubmersible hull form to analyze its hydrodynamic features,including resistance,powering,and maneuvering.The simulations were conducted with Star CCM+version 2302,a commercial package program that solves URANS equations using the SST k-ωturbulence model.The flow analysis was divided into two parts:at-surface simulations and shallowly submerged simulations.At-surface simulations cover the resistance,powering,trim,and sinkage at transition and planing regimes,with corresponding Froude numbers ranging from 0.42 to 1.69.Shallowly submerged simulations were performed at seven different submergence depths,ranging from D/LOA=0.0635 to D/LOA=0.635,and at two different speeds with Froude numbers of 0.21 and 0.33.The behaviors of the hydrodynamic forces and pitching moment for different operation depths were comprehensively analyzed.The results of the numerical analyses provide valuable insights into the hydrodynamic performance of semisubmersible naval ships,highlighting the critical factors influencing their resistance,powering,and maneuvering capabilities in both at-surface and submerged conditions.展开更多
Driven by the ever increasing demand in function integration,more and more next generation high value-added products,such as head-up displays,solar concentrators and intra-ocular-lens,etc.,are designed to possess free...Driven by the ever increasing demand in function integration,more and more next generation high value-added products,such as head-up displays,solar concentrators and intra-ocular-lens,etc.,are designed to possess freeform(i.e.,non-rotational symmetric)surfaces.The toolpath,composed of high density of short linear and circular segments,is generally used in computer numerical control(CNC)systems to machine those products.However,the discontinuity between toolpath segments leads to high-frequency fluctuation of feedrate and acceleration,which will decrease the machining efficiency and product surface finish.Driven by the ever-increasing need for high-speed high-precision machining of those products,many novel toolpath interpolation and smoothing approaches have been proposed in both academia and industry,aiming to alleviate the issues caused by the conventional toolpath representation and interpolation methods.This paper provides a comprehensive review of the state-of-the-art toolpath interpolation and smoothing approaches with systematic classifications.The advantages and disadvantages of these approaches are discussed.Possible future research directions are also offered.展开更多
The core of computer numerical control(CNC) machine tool is the electrical system which controls and coordinates every part of CNC machine tool to complete processing tasks, so it is of great significance to strengthe...The core of computer numerical control(CNC) machine tool is the electrical system which controls and coordinates every part of CNC machine tool to complete processing tasks, so it is of great significance to strengthen the reliability of the electrical system. However, the electrical system is very complex due to many uncertain factors and dynamic stochastic characteristics when failure occurs. Therefore, the traditional fault tree analysis(FTA) method is not applicable. Bayesian network(BN) not only has a unique advantage to analyze nodes with multiply states in reliability analysis for complex systems, but also can solve the state explosion problem properly caused by Markov model when dealing with dynamic fault tree(DFT). In addition, the forward causal reasoning of BN can get the conditional probability distribution of the system under considering the uncertainty;the backward diagnosis reasoning of BN can recognize the weak links in system, so it is valuable for improving the system reliability.展开更多
In order to ensure the safety,quality and efficiency of computer numerical control(CNC)machine tool processing,a real-time monitoring and visible solution for CNC machine tools based on hyper text markup language(HTML...In order to ensure the safety,quality and efficiency of computer numerical control(CNC)machine tool processing,a real-time monitoring and visible solution for CNC machine tools based on hyper text markup language(HTML)5 is proposed.The characteristics of the real-time monitoring technology of CNC machine tools under the traditional Client/Server(C/S)structure are compared and analyzed,and the technical drawbacks are proposed.Web real-time communication technology and browser drawing technology are deeply studied.A real-time monitoring and visible system for CNC machine tool data is developed based on Metro platform,combining WebSocket real-time communication technology and Canvas drawing technology.The system architecture is given,and the functions and implementation methods of the system are described in detail.The practical application results show that the WebSocket real-time communication technology can effectively reduce the bandwidth and network delay and save server resources.The numerical control machine data monitoring system can intuitively reflect the machine data,and the visible effect is good.It realizes timely monitoring of equipment alarms and prompts maintenance and management personnel.展开更多
Supersonic axisymmetric jet flow over a missile afterbody containing exhaust jet is simulated using the second order accurate positive schemes method developed for solving the axisymmetric Euler equations based on the...Supersonic axisymmetric jet flow over a missile afterbody containing exhaust jet is simulated using the second order accurate positive schemes method developed for solving the axisymmetric Euler equations based on the 2-D conservation laws.Comparisons between the numerical results and the experimental measurements show excellent agreements.The computed results are in good agreement with the numerical solutions obtained by using third order accurate RKDG finite element method.The results show larger gradient at discontinuous points compared with those obtained by second order accurate TVD schemes.It indicates that the presented method is efficient and reliable for solving the axisymmetric jet with external freestream flows,and shows that the method captures shocks well without numerical noise.展开更多
Three-dimensional numerical computation of the flow fields and pumping performances for the lobed mixer-ejector are conducted using full Navier-Stokes equations. In the computation, the inlet of the primary flow uses ...Three-dimensional numerical computation of the flow fields and pumping performances for the lobed mixer-ejector are conducted using full Navier-Stokes equations. In the computation, the inlet of the primary flow uses the mass flowrate boundary condition. The inlet of the second flow and the outlet of the mixing flow use the pressure boundary condition. Compared with the relative experimental resuits, it is shown that the present calculation is reasonable. And a series of numerical studies is performed to obtain the effects of area ratio and length-to-diameter ratio of mixing duct on pumping coefficient and thermal mixing efficiency of a lobed mixer-ejector.展开更多
基金Open Funds of State Key Laboratory of MillimeterWaves,China (No. K200401), Outstanding Teaching and ResearchAwards for Young Teachers of Nanjing Normal University (No.1320BL51)
文摘A numerical technique of the target-region locating （TRL） solver in conjunction with the wave-front method is presented for the application of the finite element method （FEM） for 3-D electromagnetic computation. First, the principle of TRL technique is described. Then, the availability of TRL solver for nonlinear application is particularly discussed demonstrating that this solver can be easily used while still remaining great efficiency. The implementation on how to apply this technique in FEM based on magnetic vector potential （MVP） is also introduced. Finally, a numerical example of 3-D magnetostatic modeling using the TRL solver and FEMLAB is given. It shows that a huge computer resource can be saved by employing the new solver.
文摘High order accurate scheme is highly desirable for Slow computation with shocks. After analysis has been made for the reason of the generation of non-physical oscillations around the shock in numerical computations, a third-order, upwind biased, shock capturing scheme was proposed. Also, a new shock fitting method, called pseudo shock fitting method, was suggested, which in principle can be with any order of accuracy. Test cases for one dimensional flows show that the new method is very satisfactory.
文摘In compact spinning with pneumatic groove,the computational fluid dynamic model,computed with parallel technologies & Fluent 6.3,is developed to simulate the flow field in condensing zone with 3D computational fluid dynamic (CFD) technology.Flowing state,distribution rules of static pressure,and velocity in condensing zone are characterized and analyzed.The results show that the fiber bundle in compact spinning with pneumatic groove is compacted by airflow and the shape of the pneumatic groove,and the static pressure in condensing zone is negative,as well as the velocity of airflow in condensing zone is not zero.The fluctuation frequencies of the static pressure and velocity near the bottom of the pneumatic groove are relatively higher,and the number of the fluctuation is equal to that of the round holes in condensing zone.
基金the National Natural Science Foundation of China(51675245).
文摘A mathematical model based on the computational fluid dynamics method,heat and mass transfer in porous media and the unreacted shrinking core model for the oxidation reaction of an individual magnetite pellet during preheating was established.The commercial software COMSOL Multiphysics was used to simulate the change in the oxidation degree of the pellet at different temperatures and oxygen concentrations,and the simulated results were compared with the exper-imental results.The model considered the influence of the exothermic heat of the reaction,and the enthalpy change was added to calculate the heat released by the oxidation.The results show that the oxidation rate on the surface of the pellet is much faster than that of the inside of the pellet.Temperature and oxygen concentration have great influence on the pellet oxidation model.Meanwhile,the exothermic calculation results show that there is a non-isothermal phenomenon inside the pellet,which leads to an increase in temperature inside the single pellet.Under the preheating condition of 873-1273 K(20%oxygen content),the heat released by the pellet oxidation reaction in a chain grate is 7.8×10^(6)-10.8×10^(6) kJ/h,which is very large and needs to be considered in the magnetite pellet oxidation modelling.
文摘Optimal computational parameters are determined through comparisons of typhoon track for similarity relevant to vdrious sets of computational parameters using a simple quasi-geostrophic barotropic vorticity equations model. The result: the Poisson equation is solved for numerical solutions at an iterative accuracy of 1.0 × 10-4 and a time step of 20 min.
基金TheNationalNaturalScienceFoundationofChina (No .5 9776 0 2 5 )andtheHi TechResearchandDevelopmentProgramofChina (S 86 3No.2 0 0 1AA3330 40 ) )
文摘Analytical and numerical computed models are developed for reverse pulse cleaning system of candle ceramic filters. A standard turbulent model is demonstrated suitably to the designing computation of reverse pulse cleaning system from the experimental and one dimensional computational result. The computed results can be used to guide the designing of reverse pulse cleaning system, which is optimum Venturi geometry. From the computed results, the general conclusions and the designing methods are obtained.
基金supported by National Natural Science Foundation of China (Grant Nos. 50827102 and 50931004)National Basic Research Program of China (Grant No. 2010CB631202 and No. 2006CB605202)High Technology Research and Development Program of China (Grant No. 2007AA03Z552)
文摘Finite difference method (FDM) was applied to simulate thermal stress recently, which normally needs a long computational time and big computer storage. This study presents two techniques for improving computational speed in numerical simulation of casting thermal stress based on FDM, one for handling of nonconstant material properties and the other for dealing with the various coefficients in discretization equations. The use of the two techniques has been discussed and an application in wave-guide casting is given. The results show that the computational speed is almost tripled and the computer storage needed is reduced nearly half compared with those of the original method without the new technologies. The stress results for the casting domain obtained by both methods that set the temperature steps to 0.1 ℃ and 10 ℃, respectively are nearly the same and in good agreement with actual casting situation. It can be concluded that both handling the material properties as an assumption of stepwise profile and eliminating the repeated calculation are reliable and effective to improve computational speed, and applicable in heat transfer and fluid flow simulation.
基金Supported by National Natural Science Foundation of China (10702015)
文摘To invest the condition of ice accretion on the blade used for straight-bladed vertical axis wind turbine （SB-VAWT）, wind tunnel tests were carried out on a blade with NACA0015 airfoil by using a small simple icing wind tunnel. Tests were carried out at some typical attack angles under different wind speeds and flow discharges of a water spray with wind. The icing shape and area on blade surface were recorded and measured, Then the numerical computation was carded out to calculate the lift and drag coefficients of the blade before and after ice accretion according to the experiment result, the effect of icing on the aerodynamic characteristics of blade were discussed.
文摘The main goal of this paper is to compute the Figure-eight solutions for the planar Newtonian 3-body problem with equal masses by finding the critical points of the functional associated with the motion equations of 3-body in plane R2. The algorithm adopted here is the steepest descent method, which is simple but very valid for our problem.
基金Project (No. 2006AA05Z148) supported by the Hi-Tech Research and Development Program (863) of China
文摘A detailed mathematical model of a direct internal reforming solid oxide fuel cell(DIR-SOFC) incorporating with simulation of chemical and physical processes in the fuel cell is presented. The model is developed based on the reforming and electrochemical reaction mechanisms,mass and energy conservation,and heat transfer. A computational fluid dynamics(CFD) method is used for solving the complicated multiple partial differential equations(PDEs) to obtain the numerical approximations. The resulting distributions of chemical species concentrations,temperature and current density in a cross-flow DIR-SOFC are given and analyzed in detail. Further,the influence between distributions of chemical species concentrations,temperature and current density during the simulation is illustrated and discussed. The heat and mass transfer,and the kinetics of reforming and electrochemical reactions have significant effects on the parameter distributions within the cell. The results show the particular characteristics of the DIR-SOFC among fuel cells,and can aid in stack design and control.
文摘A finite different method is developed to predict the side force on a high speedtrain in a cross-wind at low yaw anglee. The k-εturbulence model with wallfunctions is employed. the solution algorithm is based on curvilinearnonorthogonal coordinates,covariant velocity components ,and staggered gridarrangement. The convective fluxes are described by the Power tow Scheme.A highly deformed grid generated with an elliptic grid generator is used aroundthe comero of the cross-section of the train. The results obtained comparepositively with wind tunnel experinients.
基金National Natural Science Foundation of China(No.52071306)the Natural Science Foundation of Shandong Province(No.ZR2019MEE050)the Natural Science Foundation of Zhejiang Province(No.LZ22E090003).
文摘The local time-stepping(LTS)algorithm is an adaptive method that adjusts the time step by selecting suitable intervals for different regions based on the spatial scale of each cell and water depth and flow velocity between cells.The method can be optimized by calculating the maximum power of two of the global time step increments in the domain,allowing the optimal time step to be approached throughout the grid.To verify the acceleration and accuracy of LTS in storm surge simulations,we developed a model to simulate astronomical storm surges along the southern coast of China.This model employs the shallow water equations as governing equations,numerical discretization using the finite volume method,and fluxes calculated by the Roe solver.By comparing the simulation results of the traditional global time-stepping algorithm with those of the LTS algorithm,we find that the latter fit the measured data better.Taking the calculation results of Typhoon Sally in 1996 as an example,we show that compared with the traditional global time-stepping algorithm,the LTS algorithm reduces computation time by 2.05 h and increases computation efficiency by 2.64 times while maintaining good accuracy.
基金funded by the National Natural Science Foundation of China(No.42174104No.U1939204:No.42204089)+2 种基金the Hubei Provincial Natural Science Foundation of China(2022CFB350)Fund of Wuhan,Gravitation and Solid Earth Tides,National Observation and Research Station(WHYWZ202108WHYWZ202301)。
文摘To analyze the triggering relationship of historical earthquakes to the 2023 Jishishan earthquake and estimate the seismic risk in the adjacent region after the earthquake,we calculate the evolution process of seismic stress generated by 11 earthquakes with MS≥6.0 and 1 earthquake with MS5.7 near the source in the past 100 years.The results show that before the 2023 Jishishan earthquake,the entire Lajishan Northern Edge Fault zone was under the stress shadow generated by the 12 earthquakes.The stress reduction at the 2023 Jishishan earthquake epicenter was approximately 15.1 kPa,and the contribution of this stress shadow mainly comes from the 1920 MS8.5 Haiyuan earthquake.The coseismic stress drop at the epicenter was around-292.1 kPa,and the maximum stress drop for the 2023 Jishishan earthquake was around-346.2 kPa.The Jishishan earthquake increased the stress of the two seismic gaps in the Lajishan Northern Edge Fault by 14.7 kPa and 59.7 k Pa respectively,the stress on the Lajishan Southern Edge Fault zone increased by 10.9 kPa,and the stress on the east section of Xunhua Nanshan Fault increased by 11.1 kPa.These stress increments potentially elevate the seismic hazard along these fault zones.In the future earthquake prevention and disaster reduction,attention should be paid to the seismic risk of these fault zones.
文摘Semisubmersible naval ships are versatile military crafts that combine the advantageous features of high-speed planing crafts and submarines.At-surface,these ships are designed to provide sufficient speed and maneuverability.Additionally,they can perform shallow dives,offering low visual and acoustic detectability.Therefore,the hydrodynamic design of a semisubmersible naval ship should address at-surface and submerged conditions.In this study,Numerical analyses were performed using a semisubmersible hull form to analyze its hydrodynamic features,including resistance,powering,and maneuvering.The simulations were conducted with Star CCM+version 2302,a commercial package program that solves URANS equations using the SST k-ωturbulence model.The flow analysis was divided into two parts:at-surface simulations and shallowly submerged simulations.At-surface simulations cover the resistance,powering,trim,and sinkage at transition and planing regimes,with corresponding Froude numbers ranging from 0.42 to 1.69.Shallowly submerged simulations were performed at seven different submergence depths,ranging from D/LOA=0.0635 to D/LOA=0.635,and at two different speeds with Froude numbers of 0.21 and 0.33.The behaviors of the hydrodynamic forces and pitching moment for different operation depths were comprehensively analyzed.The results of the numerical analyses provide valuable insights into the hydrodynamic performance of semisubmersible naval ships,highlighting the critical factors influencing their resistance,powering,and maneuvering capabilities in both at-surface and submerged conditions.
基金the support from the UK Engineering and Physical Sciences Research Council (EPSRC) under the program (No. EP/K018345/1)the International Cooperation Program of China (No. 2015DFA70630)
文摘Driven by the ever increasing demand in function integration,more and more next generation high value-added products,such as head-up displays,solar concentrators and intra-ocular-lens,etc.,are designed to possess freeform(i.e.,non-rotational symmetric)surfaces.The toolpath,composed of high density of short linear and circular segments,is generally used in computer numerical control(CNC)systems to machine those products.However,the discontinuity between toolpath segments leads to high-frequency fluctuation of feedrate and acceleration,which will decrease the machining efficiency and product surface finish.Driven by the ever-increasing need for high-speed high-precision machining of those products,many novel toolpath interpolation and smoothing approaches have been proposed in both academia and industry,aiming to alleviate the issues caused by the conventional toolpath representation and interpolation methods.This paper provides a comprehensive review of the state-of-the-art toolpath interpolation and smoothing approaches with systematic classifications.The advantages and disadvantages of these approaches are discussed.Possible future research directions are also offered.
基金the National Science and Technology Major Project of China(No.2014ZX04014-011)
文摘The core of computer numerical control(CNC) machine tool is the electrical system which controls and coordinates every part of CNC machine tool to complete processing tasks, so it is of great significance to strengthen the reliability of the electrical system. However, the electrical system is very complex due to many uncertain factors and dynamic stochastic characteristics when failure occurs. Therefore, the traditional fault tree analysis(FTA) method is not applicable. Bayesian network(BN) not only has a unique advantage to analyze nodes with multiply states in reliability analysis for complex systems, but also can solve the state explosion problem properly caused by Markov model when dealing with dynamic fault tree(DFT). In addition, the forward causal reasoning of BN can get the conditional probability distribution of the system under considering the uncertainty;the backward diagnosis reasoning of BN can recognize the weak links in system, so it is valuable for improving the system reliability.
文摘In order to ensure the safety,quality and efficiency of computer numerical control(CNC)machine tool processing,a real-time monitoring and visible solution for CNC machine tools based on hyper text markup language(HTML)5 is proposed.The characteristics of the real-time monitoring technology of CNC machine tools under the traditional Client/Server(C/S)structure are compared and analyzed,and the technical drawbacks are proposed.Web real-time communication technology and browser drawing technology are deeply studied.A real-time monitoring and visible system for CNC machine tool data is developed based on Metro platform,combining WebSocket real-time communication technology and Canvas drawing technology.The system architecture is given,and the functions and implementation methods of the system are described in detail.The practical application results show that the WebSocket real-time communication technology can effectively reduce the bandwidth and network delay and save server resources.The numerical control machine data monitoring system can intuitively reflect the machine data,and the visible effect is good.It realizes timely monitoring of equipment alarms and prompts maintenance and management personnel.
基金Supported by the National Natural Defense Basic Scientific Research Program of China(A262006-1288)the Key Disciplines Program of Shanghai Municipal Commission of Education(J50501)~~
文摘Supersonic axisymmetric jet flow over a missile afterbody containing exhaust jet is simulated using the second order accurate positive schemes method developed for solving the axisymmetric Euler equations based on the 2-D conservation laws.Comparisons between the numerical results and the experimental measurements show excellent agreements.The computed results are in good agreement with the numerical solutions obtained by using third order accurate RKDG finite element method.The results show larger gradient at discontinuous points compared with those obtained by second order accurate TVD schemes.It indicates that the presented method is efficient and reliable for solving the axisymmetric jet with external freestream flows,and shows that the method captures shocks well without numerical noise.
文摘Three-dimensional numerical computation of the flow fields and pumping performances for the lobed mixer-ejector are conducted using full Navier-Stokes equations. In the computation, the inlet of the primary flow uses the mass flowrate boundary condition. The inlet of the second flow and the outlet of the mixing flow use the pressure boundary condition. Compared with the relative experimental resuits, it is shown that the present calculation is reasonable. And a series of numerical studies is performed to obtain the effects of area ratio and length-to-diameter ratio of mixing duct on pumping coefficient and thermal mixing efficiency of a lobed mixer-ejector.
