It has always been a difficult problem to extract horizontal and vertical displacement components from the InSAR LOS （Line of Sight） displacement since the advent of monitoring ground surface deformation with InSAR ...It has always been a difficult problem to extract horizontal and vertical displacement components from the InSAR LOS （Line of Sight） displacement since the advent of monitoring ground surface deformation with InSAR technique. Having tried to fit the firsthand field investigation data with a least squares model and obtained a preliminary result, this paper, based on the previous field data and the InSAR data, presents a linear cubic interpolation model which well fits the feature of earthquake fracture zone. This model inherits the precision of investigation data; moreover make use of some advantages of the InSAR technique, such as quasi-real time observation, continuous recording and all-weather measurement. Accordingly, by means of the model this paper presents a method to decompose the InSAR slant range co-seismic displacement （i.e. LOS change） into horizontal and vertical displacement components. Approaching the real motion step by step, finally a serial of curves representing the co-seismic horizontal and vertical displacement component along the main earthquake fracture zone are approximately obtained.展开更多
Atomistic simulations were adopted to study the solute segregation effect on dislocation transmutation across the{1012}twin boundaries in magnesium.For pure magnesium,the dislocation-twin reaction resulted in the form...Atomistic simulations were adopted to study the solute segregation effect on dislocation transmutation across the{1012}twin boundaries in magnesium.For pure magnesium,the dislocation-twin reaction resulted in the formation of sessile dislocations accompanied by the fast migration of the twin boundary,and no〈c+a〉dislocation occurred.With Al segregation,instead,two basal dislocations transmuted into one prismatic〈c+a〉dislocation in the twin.Twin migration was significantly impeded,and the resultant twin disconnections stayed localized and had a higher step character than in pure Mg.To reveal the mechanism of the effect of solute segregation,the Peierls barriers of twin disconnections were calculated,and the dynamic evolutions of twin disconnection dipoles were simulated.The results suggested that Al segregation softened the Peierls barrier of twin disconnections but imposed a high pinning force on twin disconnections,thus attenuating their mobility.Moreover,given the same Al segregation,the twin disconnection dipole with a higher step showed greater stability,which explained the presence of localized twin disconnections with a higher step in the cases with Al segregation than in pure magnesium.The solute segregation induced low mobility of twin disconnections contributed to the occurrence of〈c+a〉dislocations.展开更多
This study focuses on permanent surface dislocations caused by a strike-slip fault in an alluvial valley.A twodimensional mathematical model is utilized,considering the valley to have a half-cylindrical shape.The vall...This study focuses on permanent surface dislocations caused by a strike-slip fault in an alluvial valley.A twodimensional mathematical model is utilized,considering the valley to have a half-cylindrical shape.The valley medium is assumed to be isotropic,linear elastic and nonhomogeneous,such that the shear modulus of the valley has spatial dependency.The valley is surrounded by an isotropic,linear elastic and homogeneous half-space.A strike-slip fault is located at the intersection between the valley and the half-space.The problem is solved analytically by using finite Fourier transform.Displacement functions are obtained in closed-form,in terms of power series and hypergeometric function series.Unknown coefficients of these series are determined from the boundary conditions,leading to an analytical exact solution.Numerical results indicate that the nonhomogeneity of the alluvial valley material has a limited impact on permanent surface dislocations unless there is a significant variation in the material properties within the functionally graded zone.In many cases,approximating the nonhomogeneous alluvial valley as a homogeneous medium is suitable.展开更多
Lutetium oxide(Lu_(2)O_(3))is recognized as a potential laser crystal material,and it is noted for its high ther⁃mal conductivity,low phonon energy,and strong crystal field.Nevertheless,its high melting point of 2450...Lutetium oxide(Lu_(2)O_(3))is recognized as a potential laser crystal material,and it is noted for its high ther⁃mal conductivity,low phonon energy,and strong crystal field.Nevertheless,its high melting point of 2450℃induces significant temperature gradients,resulting in a proliferation of defects.The scarcity of comprehensive research on this crystal’s defects hinders the enhancement of crystal quality.In this study,we employed the chemical etching method to examine the etching effects on Lu_(2)O_(3)crystals under various conditions and to identify the optimal conditions for investi⁃gating the dislocation defects of Lu_(2)O_(3)crystals(mass fraction 70%H3PO4,160℃,15-18 min).The morphologies of dislocation etch pits on the(111)-and(110)-oriented Lu_(2)O_(3)wafers were characterized using microscopy,scanning electron microscopy and atomic force microscopy.This research addresses the gap in understanding Lu_(2)O_(3)line defects and offers guidance for optimizing the crystal growth process and improving crystal quality.展开更多
This study investigates the effect of high current density electropulsing on the material in a rapid stress relaxation process.An AISI 1020 steel was shot-peened to induce surface compressive residual stresses in a co...This study investigates the effect of high current density electropulsing on the material in a rapid stress relaxation process.An AISI 1020 steel was shot-peened to induce surface compressive residual stresses in a controlled manner and subsequently electropulsed to investigate the changes in microstructure and defect configuration.AISI 1020 steel was chosen as it has a simple microstructure(plain ferritic)and composition with low alloying conditions.It is an appropriate material to study the effect of trans-mitting electric pulses on the microstructural defect evolution.A combination of electron-backscattered diffraction and transmission electron microscopy proved to be an effective tool in characterizing the post-electropulsing effects critically.By application of electropulsing,a reduction in the surface residual stress layer was noticed.Also,reductions in misorientation and dislocation density together with the disentan-glement of dislocations within the cold-worked layer were observed after electropulsing.Additionally,the annihilation of shot-peening-induced deformation bands beyond the residual layer depth was observed.These effects have been rationalised by taking into account the various possibilities of athermal effects of electropulsing.展开更多
Pyramidal dislocations are important for ductility enhancement of magnesium alloys.In this work,molecular dynamics simulations were employed to study the gliding behavior of pyramidal(c+a)dislocations under c-axis com...Pyramidal dislocations are important for ductility enhancement of magnesium alloys.In this work,molecular dynamics simulations were employed to study the gliding behavior of pyramidal(c+a)dislocations under c-axis compressive loading and tensile loading.The Peierls stress of Py-Ⅰ dislocation shows strong tension-compression asymmetry.However,no tension-compression asymmetry is seen on the Py-Ⅱ dislocation and basal dislocation.The tension-compression asymmetry origins from the asymmetry of partial dislocations of Py-Ⅰ dislocation,which leads to the dislocation core contracted under c-axis compressive loading and expanded under tensile loading.By analyzing the forces acting on the partial dislocations,we defined a neutral direction,which deviates from the full dislocation Burgers vector by 70.3°.The neutral direction is dependent on the ratio of lattice stresses of partial dislocations.If the shear stress is applied along the neutral direction,tension-compression asymmetry is eliminated and the dislocation core is un-contracted/un-expanded.The neutral direction of symmetrical dislocations(Py-Ⅱ dislocation and basal dislocation)is just the full dislocation Burgers vector.The tension-compression asymmetry and dislocation core contraction/expansion have an important influence on the dislocation behaviors,such as cross-slip,decomposition,basaltransition and mobility,which can be used to explain the mechanical behaviors of Mg single-crystals compressed along c-axis.展开更多
Integrating a heterogeneous structure can significantly enhance the strength-ductility synergy of composites.However,the relationship between hetero-deformation induced(HDI)strain hardening and dislocation activity ca...Integrating a heterogeneous structure can significantly enhance the strength-ductility synergy of composites.However,the relationship between hetero-deformation induced(HDI)strain hardening and dislocation activity caused by heterogeneous structures in the magnesium matrix composite remains unclear.In this study,a dual-heterogeneous TiC/AZ61 composite exhibits significantly improved plastic elongation(PEL)by nearly one time compared to uniform FG composite,meanwhile maintaining a high strength(UTS:417 MPa).This is because more severe deformation inhomogeneity in heterogeneous structure leads to more geometrically necessary dislocations(GNDs)accumulation and stronger HDI stress,resulting in higher HDI hardening compared to FG and CG composites.During the early stage of plastic deformation,the pile-up types of GND in the FG zone and CG zone are significantly different.GNDs tend to form substructures in the FG zone instead of the CG zone.They only accumulate at grain boundaries of the CG region,thereby leading to obviously increased back stress in the CG region.In the late deformation stage,the elevated HDI stress activates the new〈c+a〉dislocations in the CG region,resulting in dislocation entanglements and even the formation of substructures,further driving the high hardening in the heterogeneous composite.However,For CG composite,〈c+a〉dislocations are not activated even under large plastic strains,and only〈a〉dislocations pile up at grain boundaries and twin boundaries.Our work provides an in-depth understanding of dislocation variation and HDI hardening in heterogeneous magnesium-based composites.展开更多
The plastic deformation of semiconductors,a process critical to their mechanical and electronic properties,involves various mechanisms such as dislocation motion and phase transition.Here,we systematically examined th...The plastic deformation of semiconductors,a process critical to their mechanical and electronic properties,involves various mechanisms such as dislocation motion and phase transition.Here,we systematically examined the temperature-dependent Peierls stress for 30°and 90°partial dislocations in cadmium telluride(CdTe),using a combination of molecular statics and molecular dynamics simulations with a machine-learning force field,as well as density functional theory simulations.Our findings reveal that the 0 K Peierls stresses for these partial dislocations in CdTe are relatively low,ranging from 0.52 GPa to 1.46 GPa,due to its significant ionic bonding characteristics.Notably,in the CdTe system containing either a 30°Cd-core or 90°Te-core partial dislocation,a phase transition from the zinc-blende phase to theβ-Sn-like phase is favored over dislocation motion.This suggests a competitive relationship between these two mechanisms,driven by the bonding characteristics within the dislocation core and the relatively low phase transition stress of∼1.00 GPa.Furthermore,we observed a general trend wherein the Peierls stress for partial dislocations in CdTe exhibits a temperature dependence,which decreases with increasing temperature,becoming lower than the phase transition stress at elevated temperatures.Consequently,the dominant deformation mechanism in CdTe shifts from solid-state phase transition at low temperatures to dislocation motion at high temperatures.This investigation uncovers a compelling interplay between dislocation motion and phase transition in the plastic deformation of CdTe,offering profound insights into the mechanical behavior and electronic performance of CdTe and other II-VI semiconductors.展开更多
Dislocations and disclinations are fundamental topological defects within crystals,which determine the mechanical properties of metals and alloys.Despite their important roles in multiple physical mechanisms,e.g.,dyna...Dislocations and disclinations are fundamental topological defects within crystals,which determine the mechanical properties of metals and alloys.Despite their important roles in multiple physical mechanisms,e.g.,dynamic recovery and grain boundary mediated plasticity,the intrinsic coupling and correlation between disclinations and dislocations,and their impacts on the deformation behavior of metallic materials still remain obscure,partially due to the lack of a theoretical tool to capture the rotational nature of disclinations.By using a Lie-algebra-based theoretical framework,we obtain a general equation to quantify the intrinsic coupling of disclinations and dislocations.Through quasi in-situ electron backscatter diffraction characterizations and disclination/dislocation density analyses in Mg alloys,the generation,coevolution and reactions of disclinations and dislocations during dynamic recovery and superplastic deformation have been quantitatively analyzed.It has been demonstrated that the obtained governing equation can capture multiple physical processes associated with mechanical deformation of metals,e.g.,grain rotation and grain boundary migration,at both room temperature and high temperature.By establishing the disclination-dislocation coupling equation within a Lie algebra description,our work provides new insights for exploring the coevolution and reaction of disclinations/dislocations,with profound implications for elucidating the microstructure-property relationship and underlying deformation mechanisms in metallic materials.展开更多
Elbow dislocations are rare injuries in children due to the resistance of the capsuloligamentous structures. Anterior dislocation is very rare and its combination with an olecranon fracture is unusual. The authors rep...Elbow dislocations are rare injuries in children due to the resistance of the capsuloligamentous structures. Anterior dislocation is very rare and its combination with an olecranon fracture is unusual. The authors report a case of this lesion in a 7-year-old child managed nonoperatively.展开更多
BACKGROUND Inferior intra-articular patella dislocation is rare and comprises horizontal(type 1)and the more common vertical(type 2)dislocations in young and elderly patients respectively.In this case report,we descri...BACKGROUND Inferior intra-articular patella dislocation is rare and comprises horizontal(type 1)and the more common vertical(type 2)dislocations in young and elderly patients respectively.In this case report,we describe a case of an elderly patient who pre sented with a type 2 dislocation after a fall.The mechanisms of inferior patella dislocation,their classification,key imaging features and treatment options are discussed.CASE SUMMARY A 75-year-old woman presented with a right knee fixed flexion deformity after a fall.Preoperative imaging confirmed a vertical intra-articular patella dislocation with a femoral trochlear osteochondral defect and lax though grossly intact patella tendon.Closed reduction was performed under general anaesthesia.Knee arthroscopy confirmed the presence of a femoral trochlear osteochondral defect whose edges were subsequently smoothed and there was debridement of scant debris with thorough irrigation of the joint.Postoperative imaging demonstrated anatomical alignment,however,there was a new nondisplaced medial femoral trochlear.The patient however was able to mobilise well in a range of motion brace set at 0-30 degrees and was discharged 1-day post operatively.CONCLUSION Inferior patella dislocation is rare and this article highlights its types and imaging features which determine the most appropriate management.展开更多
Objective: The present research aims to determine if adherence to the Lewinnek safe zone, when exclusively considered, constitutes a pivotal element for ensuring stability in the context of total hip arthroplasty. Thi...Objective: The present research aims to determine if adherence to the Lewinnek safe zone, when exclusively considered, constitutes a pivotal element for ensuring stability in the context of total hip arthroplasty. This is done by examining the acetabular placement in instances of hip dislocation after total hip arthroplasty (THA). Methodology: The authors searched 2653 patient records from 2015 to 2022 looking for patients who had total hip arthroplasty at our facility. For the analysis, 23 patients were culled from 64 individuals who exhibited post-THA dislocations, employing a stringent exclusion criterion, and the resultant acetabular angulation and anteversion were quantified utilizing PEEKMED software (Peek Health S.A., Portugal) upon radiographic evidence. Results: Within the operational timeframe, from the cohort of 2653 subjects, 64 presented with at least a singular incident of displacement. Post-exclusion criterion enforcement, 23 patients were eligible for inclusion. Of these, 10 patients conformed to the safe zone demarcated by Lewinnek for both inclination and anteversion angles, while 13 exhibited deviations from the prescribed anteversion and/or inclination benchmarks. Conclusion: Analysis of the 23 patients reveals that 13 did not confirm to be in the safe zone parameters for anteversion and/or inclination, whereas 10 were within the safe zone as per Lewinnek’s guidelines. This investigative review, corroborated by extant literature, suggests that the isolated consideration of the Lewinnek safe zone does not suffice as a solitary protective factor. It further posits that additional variables are equally critical as acetabular positioning and mandate individual assessment.展开更多
Metallic materials,although composed of metallic bonds,exhibit a wide range of mechanical properties:some are ductile and deformable,while others undergo a pronounced ductile-to-brittle transition(DBT),displaying cera...Metallic materials,although composed of metallic bonds,exhibit a wide range of mechanical properties:some are ductile and deformable,while others undergo a pronounced ductile-to-brittle transition(DBT),displaying ceramic-like brittle behavior once below a critical temperature.For decades,the dominant mechanism driving the ductile-to-brittle transition of metals-whether dislocation nucleation or dislocation slip-has been a topic of ongoing debate.A new concept of dislocation source efficiency,however,suggests that both processes are complementary and essential for overall ductile deformation.The relative mobility of screw versus edge dislocations dictates the efficiency of dislocation sources,which in turn governs dislocation multiplication and ultimately the material’s ability to plastic deformation.Furthermore,we developed a new model that incorporates factors affecting dislocation activities,such as the initial dislocation density and the number of dislocation sources,offering promising toughening strategies for both metallic structural alloys and ceramics.展开更多
Elastic strain constitutes a decisive factor in determining the recoverable deformability of thermoelectric materials.Plastic deformation for microstructure engineering has been demonstrated as a viable approach to en...Elastic strain constitutes a decisive factor in determining the recoverable deformability of thermoelectric materials.Plastic deformation for microstructure engineering has been demonstrated as a viable approach to enhance the elastic strain.However,this approach is highly dependent on the material's plasticity,which is rather limited by the rigidity for the majority of inorganic semiconducting thermoelectric materials.Thermocouple materials,as metallic thermoelectric materials,possess a favorable plasticity,motivating this work to focus on the elastic bendability of a metallic thermoelectric generator that is composed of K-type thermocouple components,namely p-type Ni_(90)Cr_(10) and n-type Ni_(95)Al_(2)Mn_(2)Si.The cold-rolling process enables a large elastic modulus and a high yield strength,thanks to the texturized direction along<111>,and dense dislocations and refined grains,respectively,eventually resulting in a 400%increase in the elastic strain.Such superior elasticity ensures the preservation of the initial transport properties for the rolled films even after being bent 100000 times within a radius of~8 mm.A power output of~414μW is achieved in a ten-leg flexible thermoelectric device,suggesting its substantial potential for powering wearable electronics.展开更多
Despite the promising prospects of body-centered cubic iron(BCC Fe)in aerospace,energy transportation,and nuclear applications,the effects of extreme environments on its mechanical behaviors and deformation mechanisms...Despite the promising prospects of body-centered cubic iron(BCC Fe)in aerospace,energy transportation,and nuclear applications,the effects of extreme environments on its mechanical behaviors and deformation mechanisms remain elusive to date.In this work,the mechanical responses and deformation behaviors of BCC Fe single crystals under extreme loading conditions are investigated by performing the three-dimensional discrete dislocation dynamics simulations.It turns out that the yield strength(σ_(y))of BCC Fe can be enhanced by increasing the strain rate(ε)and/or decreasing the deformation temperature(T).With the strain rate increasing from ε=10^(2)s^(-1)to 10^(6) s^(-1),the yield strength at 300 K rises from σ_(y)=51.14 MPa to 1114.57 MPa.When the strain rate exceeds 10^(3)s^(-1),an elastic overshoot phenomenon appears because the applied stress and the low initial dislocation density at the early tensile stage cannot drive the plastic deformation immediately.With the temperature increasing from T=100 K to 800 K,the yield strength at σ_(y)=10^(3) s^(-1)decreases from σ_(y)=64.97 MPa to 59.50 MPa.Such temperature and strain rate sensitivity of deformation behaviors are clarified from variations in the configurations of dislocation evolution and dislocation density fluxes.It is demonstrated that at low strain rate(ε≤10^(3)s^(-1))conditions,the deformation behaviors of BCC Fe are dominated by the dislocation multi-slip mechanism.With increasing strain rate to e.g.,ε>10^(3)s^(-1),the deformation behaviors are governed by the dislocation single-slip.Our investigation on the temperature and strain rate sensitivity of deformation behaviors provides insightful guidance for optimizing the mechanical performances of BCC Fe based ferritic steels.展开更多
Spurious forces are a significant challenge for multi-scale methods,e.g.,the coupled atomistic/discrete dislocation(CADD)method.The assumption of isotropic matter in the continuum domain is a critical factor leading t...Spurious forces are a significant challenge for multi-scale methods,e.g.,the coupled atomistic/discrete dislocation(CADD)method.The assumption of isotropic matter in the continuum domain is a critical factor leading to such forces.This study aims to minimize spurious forces,ensuring that atomic dislocations experience more precise forces from the continuum domain.The authors have already implemented this idea using a simplified and unrealistic slipping system.To create a comprehensive and realistic model,this paper considers all possible slip systems in the face center cubic(FCC)lattice structure,and derives the required relationships for the displacement fields.An anisotropic version of the three-dimensional CADD(CADD3D)method is presented,which generates the anisotropic displacement fields for the partial dislocations in all the twelve slip systems of the FCC lattice structure.These displacement fields are tested for the most probable slip systems of aluminum,nickel,and copper with different anisotropic levels.Implementing these anisotropic displacement fields significantly reduces the spurious forces on the slip systems of FCC materials.This improvement is particularly pronounced at greater distances from the interface and in more anisotropic materials.Furthermore,the anisotropic CADD3D method enhances the spurious stress difference between the slip systems,particularly for materials with higher anisotropy.展开更多
There is a pressing need for high-performance,high-strength low-alloy structural(HSLA)steels in various engineering fields,such as hydraulic components,engineering machinery,bridges,ships,and pressure vessels.In this ...There is a pressing need for high-performance,high-strength low-alloy structural(HSLA)steels in various engineering fields,such as hydraulic components,engineering machinery,bridges,ships,and pressure vessels.In this study,a gradient dislocation-cell structure is introduced into an HSLA steel through ultrasonic severe surface rolling.The cell size is approximately 614 nm at the topmost surface layer,and increases with increasing the depth.Most of the cell walls have a misorientation ranging from 2°to 15°,indicating they belong to low angle grain boundaries(LAGBs),while some cell walls have a misorientation of less than 2°,corresponding to dense dislocation walls(DDWs).This unique gradient structure offers an exceptional combination of strength and ductility,with a high yield strength of 522.3±1.4 MPa and an accepted elongation of 25.5±1.7%.The morphology and size of the dislocation cells remain remarkably stable after uniaxial tension,demonstrating their efficacy as effective barriers hindering dislocation movement and thus enhancing strength and hardness.This gradient dislocation-cell structure facilitates inhomogeneous plastic deformation during uniaxial tensile loading,resulting in a pronounced accumulation of geometrically necessary dislocations(GNDs).These GNDs play a significant role in conferring favorable mechanical properties by inducing hetero-deformation-induced(HDI)strengthening effects and forest hardening effects.This study presents a promising avenue for achieving the desired mechanical properties in HSLA steel.展开更多
Ensuring a harmonious coexistence between man and nature is crucial for China’s economic and social development.However,with increasing industrialization and urbanization,there is a growing mismatch between China’s ...Ensuring a harmonious coexistence between man and nature is crucial for China’s economic and social development.However,with increasing industrialization and urbanization,there is a growing mismatch between China’s ecological resilience(ER)and economic level(EL)of development,which poses a notable social threat.Currently,the link between ER and EL in China remains unclear,especially in terms of spatial dislocation(SD),referring to the disconnect between the locations where environmental impacts occur and those where economic benefits or activities are concentrated.Therefore,this paper aims to provide theoretical support and an empirical basis for policy-based solutions to address this gap.Based on the SD theory,this study systematically discusses the temporal changes,spatial patterns,and SD characteristics of China’s ER and EL using spatial auto-correlation and barycentric analysis to analyze data from 30 provinces covering the period 2011-2021.The key results are as follows.China’s ER shows a general trend of growth;however,its distribution is uneven.The spatial pattern generally decreases from the southeastern coastal provinces to the northwest.Moreover,a gradually increasing positive correlation is observed between the ER and EL,but this correlation varies by region,with some showing regional linkages and others developing independently.Finally,the dislocation index of ER and EL presents divergent results based on region-the eastern and central regions primarily show a high level of dislocation,whereas the western and northeastern regions show a low level of dislocation.The results provide a comprehensive overview of the spatiotemporal patterns in the association between ER and EL in China.The results emphasize that to balance sustainable regional development and ecological governance,a region-specific approach must be employed,prioritizing innovation-driven strategies for high ER in more developed regions and market-oriented strategies in less developed regions.展开更多
Pronounced compositional fluctuations in CrMnFeCoNi high-entropy alloys(HEAs)lead to variations of the stacking-fault energy(SFE),which dominates the dislocation behavior and mechanical properties.However,studies on t...Pronounced compositional fluctuations in CrMnFeCoNi high-entropy alloys(HEAs)lead to variations of the stacking-fault energy(SFE),which dominates the dislocation behavior and mechanical properties.However,studies on the underlying dislocation behaviors and deformation mechanisms as a function of composition(Cr/Ni ratio)within CrMnFeCoNi HEAs are largely lacking,which hinders further understanding of the composition-structure-property relationships for the rational design of HEAs.Atomistic simulations were employed in this study to investigate the core structures and dynamic behaviors of a/2<110>edge dislocations in non-equiatomic CrMnFeCoNi HEA,as well as its plasticity mechanisms.The results show that the core structure of a/2<110>edge dislocations is planar after energy minimization,but with significant variations in the separation distance between two partial dislocations along the dislocation line owing to the complex local composition.The effects of the Cr/Ni ratio on the dislocation-solute interactions during dislocation gliding were calculated and discussed.Additionally,snapshots of dislocation motion under shear stress were analyzed.The observations indicate that the strengthening of the non-equiatomic CrMnFeCoNi HEA with increasing Cr concentration is not contributed by the expected solute/dislocation interactions,but the observed events of edge extended dislocation climbing through jog nucleation.The unusual but reasonable dislocation climbing phenomenon and the resultant strengthening observed in this study open extraordinary opportunities for obtaining outstanding mechanical properties in non-equiatomic CrMnFeCoNi HEAs by tailoring the compositional variations.展开更多
On February 6,2023,the Türkiye Earthquake Doublet,consisting of two major earthquakes with magnitudes of M_(W)7.8 and M_(W)7.5,respectively,occurred within 9 h and devastated the Kahramanmaraşprovince in southwes...On February 6,2023,the Türkiye Earthquake Doublet,consisting of two major earthquakes with magnitudes of M_(W)7.8 and M_(W)7.5,respectively,occurred within 9 h and devastated the Kahramanmaraşprovince in southwest Turkey.The geodynamic background of this area is exceedingly complicated owing to the combined action of the Anatolian Plate and the neighboring Eurasian,African,and Arabian plates,which contain many faults,the most prominent of which is the East Anatolian Fault Zone(EAFZ).These two earthquakes occurred on the Pazarcık Segment(PAZ.S)of the EAFZ and theÇardak Fault(CAR.F).The investigation of co-seismic changes in the velocity structure of the subterranean medium inside the focus area is critical for our understanding of earthquake ruptures.We chose 51572 travel times before the earthquake doublet from January 1,2014,to February 5,2023,and 88371 travel times after the earthquakes from February 6 to March 5,2023,and utilized time-lapse tomography to derive the co-seismic changes in P-wave velocity.The results demonstrated that the P-wave velocity decreased around the center zone,with considerable surface displacement from the two earthquakes caused by rock breakup and stress release.The P-wave velocity increased in two areas:east of the Pazarcik Earthquake,where the Bozova Fault is located,and west of the Elbistan Earthquake.We believe that these two locations are compression zones generated by the strike-slip surface displacement.Similarly,the decrease in velocity in the areas adjacent to the Malatya Fault(MAL.F)and between the Amanos Segment(AM.S)of the EAFZ and the Savur Fault(SA.F)shows that these two locations were exposed to tension as a result of the co-seismic horizontal displacement on the surface.This study showed that in addition to the area close to the epicenter,the large earthquake can affect the velocity structure of faults far away from the main shock.展开更多
基金National Natural Science Foundation of China (40374013) and Joint Seismological Science Foundation of China (106045).
文摘It has always been a difficult problem to extract horizontal and vertical displacement components from the InSAR LOS （Line of Sight） displacement since the advent of monitoring ground surface deformation with InSAR technique. Having tried to fit the firsthand field investigation data with a least squares model and obtained a preliminary result, this paper, based on the previous field data and the InSAR data, presents a linear cubic interpolation model which well fits the feature of earthquake fracture zone. This model inherits the precision of investigation data; moreover make use of some advantages of the InSAR technique, such as quasi-real time observation, continuous recording and all-weather measurement. Accordingly, by means of the model this paper presents a method to decompose the InSAR slant range co-seismic displacement （i.e. LOS change） into horizontal and vertical displacement components. Approaching the real motion step by step, finally a serial of curves representing the co-seismic horizontal and vertical displacement component along the main earthquake fracture zone are approximately obtained.
基金supported by the National Natural Science Foundation of China(52071039 and 52301156)National Natural Science Foundation of Jiangsu Province of China(BK20241873)Natural Science Foundation of Jiangsu Province(BK20232025 and BK20243005)are greatly acknowledged.
文摘Atomistic simulations were adopted to study the solute segregation effect on dislocation transmutation across the{1012}twin boundaries in magnesium.For pure magnesium,the dislocation-twin reaction resulted in the formation of sessile dislocations accompanied by the fast migration of the twin boundary,and no〈c+a〉dislocation occurred.With Al segregation,instead,two basal dislocations transmuted into one prismatic〈c+a〉dislocation in the twin.Twin migration was significantly impeded,and the resultant twin disconnections stayed localized and had a higher step character than in pure Mg.To reveal the mechanism of the effect of solute segregation,the Peierls barriers of twin disconnections were calculated,and the dynamic evolutions of twin disconnection dipoles were simulated.The results suggested that Al segregation softened the Peierls barrier of twin disconnections but imposed a high pinning force on twin disconnections,thus attenuating their mobility.Moreover,given the same Al segregation,the twin disconnection dipole with a higher step showed greater stability,which explained the presence of localized twin disconnections with a higher step in the cases with Al segregation than in pure magnesium.The solute segregation induced low mobility of twin disconnections contributed to the occurrence of〈c+a〉dislocations.
文摘This study focuses on permanent surface dislocations caused by a strike-slip fault in an alluvial valley.A twodimensional mathematical model is utilized,considering the valley to have a half-cylindrical shape.The valley medium is assumed to be isotropic,linear elastic and nonhomogeneous,such that the shear modulus of the valley has spatial dependency.The valley is surrounded by an isotropic,linear elastic and homogeneous half-space.A strike-slip fault is located at the intersection between the valley and the half-space.The problem is solved analytically by using finite Fourier transform.Displacement functions are obtained in closed-form,in terms of power series and hypergeometric function series.Unknown coefficients of these series are determined from the boundary conditions,leading to an analytical exact solution.Numerical results indicate that the nonhomogeneity of the alluvial valley material has a limited impact on permanent surface dislocations unless there is a significant variation in the material properties within the functionally graded zone.In many cases,approximating the nonhomogeneous alluvial valley as a homogeneous medium is suitable.
基金Supported by National Key Research and Development Program of China(2021YFB3601403)National Natural Science Foundation of China(62105181)Taishan Scholar of Shandong Province(tsqn202306014)。
文摘Lutetium oxide(Lu_(2)O_(3))is recognized as a potential laser crystal material,and it is noted for its high ther⁃mal conductivity,low phonon energy,and strong crystal field.Nevertheless,its high melting point of 2450℃induces significant temperature gradients,resulting in a proliferation of defects.The scarcity of comprehensive research on this crystal’s defects hinders the enhancement of crystal quality.In this study,we employed the chemical etching method to examine the etching effects on Lu_(2)O_(3)crystals under various conditions and to identify the optimal conditions for investi⁃gating the dislocation defects of Lu_(2)O_(3)crystals(mass fraction 70%H3PO4,160℃,15-18 min).The morphologies of dislocation etch pits on the(111)-and(110)-oriented Lu_(2)O_(3)wafers were characterized using microscopy,scanning electron microscopy and atomic force microscopy.This research addresses the gap in understanding Lu_(2)O_(3)line defects and offers guidance for optimizing the crystal growth process and improving crystal quality.
基金supported by the National Research Foundation of Singapore,Rolls-Royce Singapore Pte.Ltd.,and Nanyang Technological University through grants#002123-00009 and #002124-00009.
文摘This study investigates the effect of high current density electropulsing on the material in a rapid stress relaxation process.An AISI 1020 steel was shot-peened to induce surface compressive residual stresses in a controlled manner and subsequently electropulsed to investigate the changes in microstructure and defect configuration.AISI 1020 steel was chosen as it has a simple microstructure(plain ferritic)and composition with low alloying conditions.It is an appropriate material to study the effect of trans-mitting electric pulses on the microstructural defect evolution.A combination of electron-backscattered diffraction and transmission electron microscopy proved to be an effective tool in characterizing the post-electropulsing effects critically.By application of electropulsing,a reduction in the surface residual stress layer was noticed.Also,reductions in misorientation and dislocation density together with the disentan-glement of dislocations within the cold-worked layer were observed after electropulsing.Additionally,the annihilation of shot-peening-induced deformation bands beyond the residual layer depth was observed.These effects have been rationalised by taking into account the various possibilities of athermal effects of electropulsing.
基金financially supported by National Natural Science Foundation of China(12072211,12232008)Foundation of Key laboratory(2022JCJQLB05703)Sichuan Province Science and Technology Project(2023NSFSC0914)。
文摘Pyramidal dislocations are important for ductility enhancement of magnesium alloys.In this work,molecular dynamics simulations were employed to study the gliding behavior of pyramidal(c+a)dislocations under c-axis compressive loading and tensile loading.The Peierls stress of Py-Ⅰ dislocation shows strong tension-compression asymmetry.However,no tension-compression asymmetry is seen on the Py-Ⅱ dislocation and basal dislocation.The tension-compression asymmetry origins from the asymmetry of partial dislocations of Py-Ⅰ dislocation,which leads to the dislocation core contracted under c-axis compressive loading and expanded under tensile loading.By analyzing the forces acting on the partial dislocations,we defined a neutral direction,which deviates from the full dislocation Burgers vector by 70.3°.The neutral direction is dependent on the ratio of lattice stresses of partial dislocations.If the shear stress is applied along the neutral direction,tension-compression asymmetry is eliminated and the dislocation core is un-contracted/un-expanded.The neutral direction of symmetrical dislocations(Py-Ⅱ dislocation and basal dislocation)is just the full dislocation Burgers vector.The tension-compression asymmetry and dislocation core contraction/expansion have an important influence on the dislocation behaviors,such as cross-slip,decomposition,basaltransition and mobility,which can be used to explain the mechanical behaviors of Mg single-crystals compressed along c-axis.
基金support from the National Natural Science Foundation of China(No:52061040)China Postdoctoral Science Foundation(No:2021M692512)+1 种基金Opening Project of Material Corrosion and Protection Key Laboratory of Sichuan Province(No:2023CL01)Open Projects of Key Laboratory of Advanced Technologies of Materials,Ministry of Education China,Southwest Jiaotong University(No:KLATM202003).
文摘Integrating a heterogeneous structure can significantly enhance the strength-ductility synergy of composites.However,the relationship between hetero-deformation induced(HDI)strain hardening and dislocation activity caused by heterogeneous structures in the magnesium matrix composite remains unclear.In this study,a dual-heterogeneous TiC/AZ61 composite exhibits significantly improved plastic elongation(PEL)by nearly one time compared to uniform FG composite,meanwhile maintaining a high strength(UTS:417 MPa).This is because more severe deformation inhomogeneity in heterogeneous structure leads to more geometrically necessary dislocations(GNDs)accumulation and stronger HDI stress,resulting in higher HDI hardening compared to FG and CG composites.During the early stage of plastic deformation,the pile-up types of GND in the FG zone and CG zone are significantly different.GNDs tend to form substructures in the FG zone instead of the CG zone.They only accumulate at grain boundaries of the CG region,thereby leading to obviously increased back stress in the CG region.In the late deformation stage,the elevated HDI stress activates the new〈c+a〉dislocations in the CG region,resulting in dislocation entanglements and even the formation of substructures,further driving the high hardening in the heterogeneous composite.However,For CG composite,〈c+a〉dislocations are not activated even under large plastic strains,and only〈a〉dislocations pile up at grain boundaries and twin boundaries.Our work provides an in-depth understanding of dislocation variation and HDI hardening in heterogeneous magnesium-based composites.
基金supported by the National Science Foundation(No.CMMI-2019459).
文摘The plastic deformation of semiconductors,a process critical to their mechanical and electronic properties,involves various mechanisms such as dislocation motion and phase transition.Here,we systematically examined the temperature-dependent Peierls stress for 30°and 90°partial dislocations in cadmium telluride(CdTe),using a combination of molecular statics and molecular dynamics simulations with a machine-learning force field,as well as density functional theory simulations.Our findings reveal that the 0 K Peierls stresses for these partial dislocations in CdTe are relatively low,ranging from 0.52 GPa to 1.46 GPa,due to its significant ionic bonding characteristics.Notably,in the CdTe system containing either a 30°Cd-core or 90°Te-core partial dislocation,a phase transition from the zinc-blende phase to theβ-Sn-like phase is favored over dislocation motion.This suggests a competitive relationship between these two mechanisms,driven by the bonding characteristics within the dislocation core and the relatively low phase transition stress of∼1.00 GPa.Furthermore,we observed a general trend wherein the Peierls stress for partial dislocations in CdTe exhibits a temperature dependence,which decreases with increasing temperature,becoming lower than the phase transition stress at elevated temperatures.Consequently,the dominant deformation mechanism in CdTe shifts from solid-state phase transition at low temperatures to dislocation motion at high temperatures.This investigation uncovers a compelling interplay between dislocation motion and phase transition in the plastic deformation of CdTe,offering profound insights into the mechanical behavior and electronic performance of CdTe and other II-VI semiconductors.
基金Financial supports from the National Natural Science Foundation of China(Nos.52171116,U22A20109,52334010 and T2325013)are greatly acknowledgedPartial financial support came from The Program for the Central University Youth Innovation Team,and the Fundamental Research Funds for the Central Universities,JLU.
文摘Dislocations and disclinations are fundamental topological defects within crystals,which determine the mechanical properties of metals and alloys.Despite their important roles in multiple physical mechanisms,e.g.,dynamic recovery and grain boundary mediated plasticity,the intrinsic coupling and correlation between disclinations and dislocations,and their impacts on the deformation behavior of metallic materials still remain obscure,partially due to the lack of a theoretical tool to capture the rotational nature of disclinations.By using a Lie-algebra-based theoretical framework,we obtain a general equation to quantify the intrinsic coupling of disclinations and dislocations.Through quasi in-situ electron backscatter diffraction characterizations and disclination/dislocation density analyses in Mg alloys,the generation,coevolution and reactions of disclinations and dislocations during dynamic recovery and superplastic deformation have been quantitatively analyzed.It has been demonstrated that the obtained governing equation can capture multiple physical processes associated with mechanical deformation of metals,e.g.,grain rotation and grain boundary migration,at both room temperature and high temperature.By establishing the disclination-dislocation coupling equation within a Lie algebra description,our work provides new insights for exploring the coevolution and reaction of disclinations/dislocations,with profound implications for elucidating the microstructure-property relationship and underlying deformation mechanisms in metallic materials.
文摘Elbow dislocations are rare injuries in children due to the resistance of the capsuloligamentous structures. Anterior dislocation is very rare and its combination with an olecranon fracture is unusual. The authors report a case of this lesion in a 7-year-old child managed nonoperatively.
文摘BACKGROUND Inferior intra-articular patella dislocation is rare and comprises horizontal(type 1)and the more common vertical(type 2)dislocations in young and elderly patients respectively.In this case report,we describe a case of an elderly patient who pre sented with a type 2 dislocation after a fall.The mechanisms of inferior patella dislocation,their classification,key imaging features and treatment options are discussed.CASE SUMMARY A 75-year-old woman presented with a right knee fixed flexion deformity after a fall.Preoperative imaging confirmed a vertical intra-articular patella dislocation with a femoral trochlear osteochondral defect and lax though grossly intact patella tendon.Closed reduction was performed under general anaesthesia.Knee arthroscopy confirmed the presence of a femoral trochlear osteochondral defect whose edges were subsequently smoothed and there was debridement of scant debris with thorough irrigation of the joint.Postoperative imaging demonstrated anatomical alignment,however,there was a new nondisplaced medial femoral trochlear.The patient however was able to mobilise well in a range of motion brace set at 0-30 degrees and was discharged 1-day post operatively.CONCLUSION Inferior patella dislocation is rare and this article highlights its types and imaging features which determine the most appropriate management.
文摘Objective: The present research aims to determine if adherence to the Lewinnek safe zone, when exclusively considered, constitutes a pivotal element for ensuring stability in the context of total hip arthroplasty. This is done by examining the acetabular placement in instances of hip dislocation after total hip arthroplasty (THA). Methodology: The authors searched 2653 patient records from 2015 to 2022 looking for patients who had total hip arthroplasty at our facility. For the analysis, 23 patients were culled from 64 individuals who exhibited post-THA dislocations, employing a stringent exclusion criterion, and the resultant acetabular angulation and anteversion were quantified utilizing PEEKMED software (Peek Health S.A., Portugal) upon radiographic evidence. Results: Within the operational timeframe, from the cohort of 2653 subjects, 64 presented with at least a singular incident of displacement. Post-exclusion criterion enforcement, 23 patients were eligible for inclusion. Of these, 10 patients conformed to the safe zone demarcated by Lewinnek for both inclination and anteversion angles, while 13 exhibited deviations from the prescribed anteversion and/or inclination benchmarks. Conclusion: Analysis of the 23 patients reveals that 13 did not confirm to be in the safe zone parameters for anteversion and/or inclination, whereas 10 were within the safe zone as per Lewinnek’s guidelines. This investigative review, corroborated by extant literature, suggests that the isolated consideration of the Lewinnek safe zone does not suffice as a solitary protective factor. It further posits that additional variables are equally critical as acetabular positioning and mandate individual assessment.
基金supported by the National Natural Science Foundation of China(Grant Nos.51971170 and 51922082)。
文摘Metallic materials,although composed of metallic bonds,exhibit a wide range of mechanical properties:some are ductile and deformable,while others undergo a pronounced ductile-to-brittle transition(DBT),displaying ceramic-like brittle behavior once below a critical temperature.For decades,the dominant mechanism driving the ductile-to-brittle transition of metals-whether dislocation nucleation or dislocation slip-has been a topic of ongoing debate.A new concept of dislocation source efficiency,however,suggests that both processes are complementary and essential for overall ductile deformation.The relative mobility of screw versus edge dislocations dictates the efficiency of dislocation sources,which in turn governs dislocation multiplication and ultimately the material’s ability to plastic deformation.Furthermore,we developed a new model that incorporates factors affecting dislocation activities,such as the initial dislocation density and the number of dislocation sources,offering promising toughening strategies for both metallic structural alloys and ceramics.
基金supported by the National Key Research and Development Program of China(2023YFB3809400)the National Natural Science Foundation of China(Grant nos.T2125008,92163203,and 52371234)+1 种基金the Hong Kong,Macao,and Taiwan Science and Technology Cooperation Project for Science and Technology Innovation Plan of Shanghai(23520760600)the Fundamental Research Funds for the Central Universities.
文摘Elastic strain constitutes a decisive factor in determining the recoverable deformability of thermoelectric materials.Plastic deformation for microstructure engineering has been demonstrated as a viable approach to enhance the elastic strain.However,this approach is highly dependent on the material's plasticity,which is rather limited by the rigidity for the majority of inorganic semiconducting thermoelectric materials.Thermocouple materials,as metallic thermoelectric materials,possess a favorable plasticity,motivating this work to focus on the elastic bendability of a metallic thermoelectric generator that is composed of K-type thermocouple components,namely p-type Ni_(90)Cr_(10) and n-type Ni_(95)Al_(2)Mn_(2)Si.The cold-rolling process enables a large elastic modulus and a high yield strength,thanks to the texturized direction along<111>,and dense dislocations and refined grains,respectively,eventually resulting in a 400%increase in the elastic strain.Such superior elasticity ensures the preservation of the initial transport properties for the rolled films even after being bent 100000 times within a radius of~8 mm.A power output of~414μW is achieved in a ten-leg flexible thermoelectric device,suggesting its substantial potential for powering wearable electronics.
基金supported by the National Natural Science Foundation of China(Grant Nos.52171013 and 52130110)the Key Research and Development Program of Shaanxi(Grant No.2025CY-YBXM-127)+1 种基金the Natural Science Foundation of Chongqing(Grant No.CSTB2022NSCQ-MSX0369)the Research Fund of the State Key Laboratory of Solidification Processing(NPU)China(Grant No.2023-QZ-03)。
文摘Despite the promising prospects of body-centered cubic iron(BCC Fe)in aerospace,energy transportation,and nuclear applications,the effects of extreme environments on its mechanical behaviors and deformation mechanisms remain elusive to date.In this work,the mechanical responses and deformation behaviors of BCC Fe single crystals under extreme loading conditions are investigated by performing the three-dimensional discrete dislocation dynamics simulations.It turns out that the yield strength(σ_(y))of BCC Fe can be enhanced by increasing the strain rate(ε)and/or decreasing the deformation temperature(T).With the strain rate increasing from ε=10^(2)s^(-1)to 10^(6) s^(-1),the yield strength at 300 K rises from σ_(y)=51.14 MPa to 1114.57 MPa.When the strain rate exceeds 10^(3)s^(-1),an elastic overshoot phenomenon appears because the applied stress and the low initial dislocation density at the early tensile stage cannot drive the plastic deformation immediately.With the temperature increasing from T=100 K to 800 K,the yield strength at σ_(y)=10^(3) s^(-1)decreases from σ_(y)=64.97 MPa to 59.50 MPa.Such temperature and strain rate sensitivity of deformation behaviors are clarified from variations in the configurations of dislocation evolution and dislocation density fluxes.It is demonstrated that at low strain rate(ε≤10^(3)s^(-1))conditions,the deformation behaviors of BCC Fe are dominated by the dislocation multi-slip mechanism.With increasing strain rate to e.g.,ε>10^(3)s^(-1),the deformation behaviors are governed by the dislocation single-slip.Our investigation on the temperature and strain rate sensitivity of deformation behaviors provides insightful guidance for optimizing the mechanical performances of BCC Fe based ferritic steels.
文摘Spurious forces are a significant challenge for multi-scale methods,e.g.,the coupled atomistic/discrete dislocation(CADD)method.The assumption of isotropic matter in the continuum domain is a critical factor leading to such forces.This study aims to minimize spurious forces,ensuring that atomic dislocations experience more precise forces from the continuum domain.The authors have already implemented this idea using a simplified and unrealistic slipping system.To create a comprehensive and realistic model,this paper considers all possible slip systems in the face center cubic(FCC)lattice structure,and derives the required relationships for the displacement fields.An anisotropic version of the three-dimensional CADD(CADD3D)method is presented,which generates the anisotropic displacement fields for the partial dislocations in all the twelve slip systems of the FCC lattice structure.These displacement fields are tested for the most probable slip systems of aluminum,nickel,and copper with different anisotropic levels.Implementing these anisotropic displacement fields significantly reduces the spurious forces on the slip systems of FCC materials.This improvement is particularly pronounced at greater distances from the interface and in more anisotropic materials.Furthermore,the anisotropic CADD3D method enhances the spurious stress difference between the slip systems,particularly for materials with higher anisotropy.
基金Supported by National Natural Science Foundation of China(Grant No.U1910212)the Priority Academic Program Development of Jiangsu Higher Education Institutions。
文摘There is a pressing need for high-performance,high-strength low-alloy structural(HSLA)steels in various engineering fields,such as hydraulic components,engineering machinery,bridges,ships,and pressure vessels.In this study,a gradient dislocation-cell structure is introduced into an HSLA steel through ultrasonic severe surface rolling.The cell size is approximately 614 nm at the topmost surface layer,and increases with increasing the depth.Most of the cell walls have a misorientation ranging from 2°to 15°,indicating they belong to low angle grain boundaries(LAGBs),while some cell walls have a misorientation of less than 2°,corresponding to dense dislocation walls(DDWs).This unique gradient structure offers an exceptional combination of strength and ductility,with a high yield strength of 522.3±1.4 MPa and an accepted elongation of 25.5±1.7%.The morphology and size of the dislocation cells remain remarkably stable after uniaxial tension,demonstrating their efficacy as effective barriers hindering dislocation movement and thus enhancing strength and hardness.This gradient dislocation-cell structure facilitates inhomogeneous plastic deformation during uniaxial tensile loading,resulting in a pronounced accumulation of geometrically necessary dislocations(GNDs).These GNDs play a significant role in conferring favorable mechanical properties by inducing hetero-deformation-induced(HDI)strengthening effects and forest hardening effects.This study presents a promising avenue for achieving the desired mechanical properties in HSLA steel.
基金funded by the National Natural Science Foundation of China[Grant No.71963030]a subproject of China’s third comprehensive scientific expedition to Xinjiang[Grant No.SQ2021xjkk01800]+1 种基金a major science and technology project in the Xinjiang Uygur Autonomous Region[Grant No.2022A01003]a scientific research innovation project for excellent doctoral students of Xinjiang University[Grant No.XJU2022BS010].
文摘Ensuring a harmonious coexistence between man and nature is crucial for China’s economic and social development.However,with increasing industrialization and urbanization,there is a growing mismatch between China’s ecological resilience(ER)and economic level(EL)of development,which poses a notable social threat.Currently,the link between ER and EL in China remains unclear,especially in terms of spatial dislocation(SD),referring to the disconnect between the locations where environmental impacts occur and those where economic benefits or activities are concentrated.Therefore,this paper aims to provide theoretical support and an empirical basis for policy-based solutions to address this gap.Based on the SD theory,this study systematically discusses the temporal changes,spatial patterns,and SD characteristics of China’s ER and EL using spatial auto-correlation and barycentric analysis to analyze data from 30 provinces covering the period 2011-2021.The key results are as follows.China’s ER shows a general trend of growth;however,its distribution is uneven.The spatial pattern generally decreases from the southeastern coastal provinces to the northwest.Moreover,a gradually increasing positive correlation is observed between the ER and EL,but this correlation varies by region,with some showing regional linkages and others developing independently.Finally,the dislocation index of ER and EL presents divergent results based on region-the eastern and central regions primarily show a high level of dislocation,whereas the western and northeastern regions show a low level of dislocation.The results provide a comprehensive overview of the spatiotemporal patterns in the association between ER and EL in China.The results emphasize that to balance sustainable regional development and ecological governance,a region-specific approach must be employed,prioritizing innovation-driven strategies for high ER in more developed regions and market-oriented strategies in less developed regions.
基金supported by the National Natural Science Foundation of China(No.52275352)the National Key Research and Development Program of China(No.2022YFB3706902)Inner Mongolia-SJTU Science and Technology Cooperation Special Project(No.2023XYJG0001-01-01).
文摘Pronounced compositional fluctuations in CrMnFeCoNi high-entropy alloys(HEAs)lead to variations of the stacking-fault energy(SFE),which dominates the dislocation behavior and mechanical properties.However,studies on the underlying dislocation behaviors and deformation mechanisms as a function of composition(Cr/Ni ratio)within CrMnFeCoNi HEAs are largely lacking,which hinders further understanding of the composition-structure-property relationships for the rational design of HEAs.Atomistic simulations were employed in this study to investigate the core structures and dynamic behaviors of a/2<110>edge dislocations in non-equiatomic CrMnFeCoNi HEA,as well as its plasticity mechanisms.The results show that the core structure of a/2<110>edge dislocations is planar after energy minimization,but with significant variations in the separation distance between two partial dislocations along the dislocation line owing to the complex local composition.The effects of the Cr/Ni ratio on the dislocation-solute interactions during dislocation gliding were calculated and discussed.Additionally,snapshots of dislocation motion under shear stress were analyzed.The observations indicate that the strengthening of the non-equiatomic CrMnFeCoNi HEA with increasing Cr concentration is not contributed by the expected solute/dislocation interactions,but the observed events of edge extended dislocation climbing through jog nucleation.The unusual but reasonable dislocation climbing phenomenon and the resultant strengthening observed in this study open extraordinary opportunities for obtaining outstanding mechanical properties in non-equiatomic CrMnFeCoNi HEAs by tailoring the compositional variations.
基金supported by the National Natural Science Foundation of China(Grant Nos.U2039203 and 42130306).
文摘On February 6,2023,the Türkiye Earthquake Doublet,consisting of two major earthquakes with magnitudes of M_(W)7.8 and M_(W)7.5,respectively,occurred within 9 h and devastated the Kahramanmaraşprovince in southwest Turkey.The geodynamic background of this area is exceedingly complicated owing to the combined action of the Anatolian Plate and the neighboring Eurasian,African,and Arabian plates,which contain many faults,the most prominent of which is the East Anatolian Fault Zone(EAFZ).These two earthquakes occurred on the Pazarcık Segment(PAZ.S)of the EAFZ and theÇardak Fault(CAR.F).The investigation of co-seismic changes in the velocity structure of the subterranean medium inside the focus area is critical for our understanding of earthquake ruptures.We chose 51572 travel times before the earthquake doublet from January 1,2014,to February 5,2023,and 88371 travel times after the earthquakes from February 6 to March 5,2023,and utilized time-lapse tomography to derive the co-seismic changes in P-wave velocity.The results demonstrated that the P-wave velocity decreased around the center zone,with considerable surface displacement from the two earthquakes caused by rock breakup and stress release.The P-wave velocity increased in two areas:east of the Pazarcik Earthquake,where the Bozova Fault is located,and west of the Elbistan Earthquake.We believe that these two locations are compression zones generated by the strike-slip surface displacement.Similarly,the decrease in velocity in the areas adjacent to the Malatya Fault(MAL.F)and between the Amanos Segment(AM.S)of the EAFZ and the Savur Fault(SA.F)shows that these two locations were exposed to tension as a result of the co-seismic horizontal displacement on the surface.This study showed that in addition to the area close to the epicenter,the large earthquake can affect the velocity structure of faults far away from the main shock.
