The aromatization of light alkenes in liquefied petroleum gas (LPG) with and without dimethyl ether (DME) addition in the feed was investigated on a modified ZSM-5 catalyst.The results showed that under the given reac...The aromatization of light alkenes in liquefied petroleum gas (LPG) with and without dimethyl ether (DME) addition in the feed was investigated on a modified ZSM-5 catalyst.The results showed that under the given reaction conditions the selectivity of alkenes to high-octane gasoline blending components was markedly enhanced and the formation of propane and butanes was greatly suppressed with the addition of DME.It was also found that the distribution of C5+ components was changed a lot with DME addition into the LPG feed.The formation of branched hydrocarbons (mainly C6 C8 i-paraffin) and multi-methyl substituted aromatics,which are high octane number gasoline blending components,was promoted significantly,while the content of n-paraffins and olefins in C5+ components was decreased obviously,indicating that in addition to the oligomerization,cracking,hydrogen-transfer and dehydrogenation-cyclization of alkenes,the methylation of the formed aromatics and olefins intermediates also plays an important role in determining the product distribution due to the high reactivity of surface methoxy groups formed by DME.And this process,in combination with the syngas-to-methanol/DME technology,provides an alternative way to the production of high-octane gasoline from coal,natural gas or renewable raw materials.展开更多
The effect of dimethyl ether (DME) co-feed on the catalytic performance of methane dehy-droaromatization (MDA) over 6Mo/HZSM-5 catalyst was investigated as a function of DME concentration under reaction conditions of ...The effect of dimethyl ether (DME) co-feed on the catalytic performance of methane dehy-droaromatization (MDA) over 6Mo/HZSM-5 catalyst was investigated as a function of DME concentration under reaction conditions of T=1023 K, p=101 kPa and SV=1500 ml/(g·h). A high benzene yield was obtained and the stability of the catalyst was improved by adding 1.5%DME to the CH4 feed. The C6H6 yield was as high as ca. 10% even after reaction for 6 h. The stability of the catalyst was further improved when DME concentration in the co-feed gas was increased to an appropriate value. TGA and TPO results of the used 6Mo/HZSM-5 catalyst showed that the amount of coke on the used catalyst was reduced and the chemical nature of the coke was changed. When 1.5%DME was added to the CH4 feed, the coke formed on the catalyst could be burned off more easily than that when only CH4 was used as reactant. It is supposed that the oxygen in DME may play a role in preventing the coke burnt off at lower temperature from transforming into the coke burnt off at higher temperature, which results in the improvement of the stability of the catalyst.展开更多
A method of electroless plating is utilized to deposit Co-Fe alloy on the surface of multi-walled carbon nanotubes （MWCNTs）,and electromagnetic parameters of MWCNTs with and without electroless plating are discussed...A method of electroless plating is utilized to deposit Co-Fe alloy on the surface of multi-walled carbon nanotubes （MWCNTs）,and electromagnetic parameters of MWCNTs with and without electroless plating are discussed. The MWCNTs covered by Co-Fe is a desirable light absorbent in wide wave band by utilizing electroless plating process in experiments. Field-emission scanning electron microscope （FESEM） and field-emission transmission electron microscope （FETEM） images as well as energy dispersive spectroscopy （EDS） results are presented to show the morphology,components and electromagnetic parameters of MWCNTs. Electromagnetic properties of MWCNTs are enhanced after electroless plating observed from contrast of results be-tween MWCNTs with and without plating. In conclusion,the covering Co-Fe on the surface of MWCNTs in 2-18 GHz frequency range has better electromagnetic properties. When the material is in the 6.5 GHz electromagnetic waves,the reflection loss is up to -10 dB,and the bandwidth more than -4 dB is 5 GHz. The excellent electromagnetic properties make it probable for MWCNTs to be utilized as absorbent in electromagnetic shielding materials.展开更多
Catalytic hydrogenation of CO_(2) using renewable hydrogen not only reduces greenhouse gas emissions,but also provides industrial chemicals.Herein,a Co-Fe bimetallic catalyst was developed by a facile reactive ball-mi...Catalytic hydrogenation of CO_(2) using renewable hydrogen not only reduces greenhouse gas emissions,but also provides industrial chemicals.Herein,a Co-Fe bimetallic catalyst was developed by a facile reactive ball-milling method for highly active and selective hydrogenation of CO_(2) to value-added hydrocarbons.When reacted at 320℃,1.0 MPa and 9600 mL h^(-1) g_(cat)^(-1),the selectivity to light olefin(C_(2)^(=)-C_(4)^(=)) and C_(5)+ species achieves 57.3% and 22.3%,respectively,at a CO_(2) co nversion of 31.4%,which is superior to previous Fe-based catalysts.The CO_(2) activation can be promoted by the CoFe phase formed by reactive ball milling of the Fe-Co_(3)O_(4) mixture,and the in-situ Co_(2)C and Fe_(5)C_(2) formed during hydrogenation are beneficial for the C-C coupling reaction.The initial C-C coupling is related to the combination of CO species with the surface carbon of Fe/Co carbides,and the sustained C-C coupling is maintained by self-recovery of defective carbides.This new strategy contributes to the development of efficient catalysts for the hydrogenation of CO_(2) to value-added hydrocarbons.展开更多
基金supported by the "Action Plan of CAS to Support China’s New and Strategic Industries with Science and Technology(2012-2014)"the "Knowledge Innovation Program of the Chinese Academy of Sciences(S201041)""Youth Innovation Promotion Association CAS(2012-2015)"
文摘The aromatization of light alkenes in liquefied petroleum gas (LPG) with and without dimethyl ether (DME) addition in the feed was investigated on a modified ZSM-5 catalyst.The results showed that under the given reaction conditions the selectivity of alkenes to high-octane gasoline blending components was markedly enhanced and the formation of propane and butanes was greatly suppressed with the addition of DME.It was also found that the distribution of C5+ components was changed a lot with DME addition into the LPG feed.The formation of branched hydrocarbons (mainly C6 C8 i-paraffin) and multi-methyl substituted aromatics,which are high octane number gasoline blending components,was promoted significantly,while the content of n-paraffins and olefins in C5+ components was decreased obviously,indicating that in addition to the oligomerization,cracking,hydrogen-transfer and dehydrogenation-cyclization of alkenes,the methylation of the formed aromatics and olefins intermediates also plays an important role in determining the product distribution due to the high reactivity of surface methoxy groups formed by DME.And this process,in combination with the syngas-to-methanol/DME technology,provides an alternative way to the production of high-octane gasoline from coal,natural gas or renewable raw materials.
基金Financial supports from the Ministry of Science and Technology of Chinathe Natural Science Foundation of China+1 种基金the Chinese Academy of Sciencethe BP-China Joint Research Center are gratefully acknowledged.
文摘The effect of dimethyl ether (DME) co-feed on the catalytic performance of methane dehy-droaromatization (MDA) over 6Mo/HZSM-5 catalyst was investigated as a function of DME concentration under reaction conditions of T=1023 K, p=101 kPa and SV=1500 ml/(g·h). A high benzene yield was obtained and the stability of the catalyst was improved by adding 1.5%DME to the CH4 feed. The C6H6 yield was as high as ca. 10% even after reaction for 6 h. The stability of the catalyst was further improved when DME concentration in the co-feed gas was increased to an appropriate value. TGA and TPO results of the used 6Mo/HZSM-5 catalyst showed that the amount of coke on the used catalyst was reduced and the chemical nature of the coke was changed. When 1.5%DME was added to the CH4 feed, the coke formed on the catalyst could be burned off more easily than that when only CH4 was used as reactant. It is supposed that the oxygen in DME may play a role in preventing the coke burnt off at lower temperature from transforming into the coke burnt off at higher temperature, which results in the improvement of the stability of the catalyst.
文摘A method of electroless plating is utilized to deposit Co-Fe alloy on the surface of multi-walled carbon nanotubes （MWCNTs）,and electromagnetic parameters of MWCNTs with and without electroless plating are discussed. The MWCNTs covered by Co-Fe is a desirable light absorbent in wide wave band by utilizing electroless plating process in experiments. Field-emission scanning electron microscope （FESEM） and field-emission transmission electron microscope （FETEM） images as well as energy dispersive spectroscopy （EDS） results are presented to show the morphology,components and electromagnetic parameters of MWCNTs. Electromagnetic properties of MWCNTs are enhanced after electroless plating observed from contrast of results be-tween MWCNTs with and without plating. In conclusion,the covering Co-Fe on the surface of MWCNTs in 2-18 GHz frequency range has better electromagnetic properties. When the material is in the 6.5 GHz electromagnetic waves,the reflection loss is up to -10 dB,and the bandwidth more than -4 dB is 5 GHz. The excellent electromagnetic properties make it probable for MWCNTs to be utilized as absorbent in electromagnetic shielding materials.
基金supported by the National Natural Science Foundation of China (22008098, 21978156, 42002040)the Program for Innovative Research Team (in Science and Technology) in University of Henan Province (21IRTSTHN004)+1 种基金the Program for Science & Technology Innovation Talents in Universities of Henan Province (22HASTIT008)the Foundation of State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering (2022-K34)。
文摘Catalytic hydrogenation of CO_(2) using renewable hydrogen not only reduces greenhouse gas emissions,but also provides industrial chemicals.Herein,a Co-Fe bimetallic catalyst was developed by a facile reactive ball-milling method for highly active and selective hydrogenation of CO_(2) to value-added hydrocarbons.When reacted at 320℃,1.0 MPa and 9600 mL h^(-1) g_(cat)^(-1),the selectivity to light olefin(C_(2)^(=)-C_(4)^(=)) and C_(5)+ species achieves 57.3% and 22.3%,respectively,at a CO_(2) co nversion of 31.4%,which is superior to previous Fe-based catalysts.The CO_(2) activation can be promoted by the CoFe phase formed by reactive ball milling of the Fe-Co_(3)O_(4) mixture,and the in-situ Co_(2)C and Fe_(5)C_(2) formed during hydrogenation are beneficial for the C-C coupling reaction.The initial C-C coupling is related to the combination of CO species with the surface carbon of Fe/Co carbides,and the sustained C-C coupling is maintained by self-recovery of defective carbides.This new strategy contributes to the development of efficient catalysts for the hydrogenation of CO_(2) to value-added hydrocarbons.
