With the rapid development of the fifth-generation(5 G)mobile communication technology,the application of each frequency band has reached the extreme,causing mutual interference between different modules.Hence,there i...With the rapid development of the fifth-generation(5 G)mobile communication technology,the application of each frequency band has reached the extreme,causing mutual interference between different modules.Hence,there is a requirement for detecting filtering and preventing interference.In the troposphere,over-the-horizon propagation occurs in atmospheric ducts and turbulent media.The effects of both ducting and turbulence can increase the probability of occurrence of long-distance co-channel interference(CCI),in turn,severely affecting the key performance indicators such as system access,handover and drop.In the 5 G era,to ensure communication channels and information security,CCI must be reduced.This paper introduces a scattering parabolic equation algorithm for calculating signal propagation in atmospheric ducts on irregular terrain boundaries.It combines Hitney’s radio physical optical model and Wagner’s nonuniform turbulent scattering model for calculating the tropospheric scattering in an evaporation duct or a surface-based duct.The new model proposes a tropospheric scattering parabolic equation algorithm for various tropospheric duct environments.Finally,as a specific case,the topographical boundaries between several cities in the East China Plain were considered,and the over-the-horizon propagation loss was simulated for various ducting and turbulent environments.The simulation results were used to evaluate whether CCI would occur between cities in a specific environment.展开更多
Co-frequency and co-time full duplex(CCFD) is a promising technique for improving spectral efficiency in next generation wireless communication systems. However, for the applications of CCFD in a cellular network, sev...Co-frequency and co-time full duplex(CCFD) is a promising technique for improving spectral efficiency in next generation wireless communication systems. However, for the applications of CCFD in a cellular network, severe co-channel interference is an essential problem. Specifically, there are two significant interferences, i.e., inter-terminal interference(ITI) and inter-cell interference(ICI), which lead to an obvious performance degradation. In this paper, two techniques are proposed for suppressing the ITI and ICI in a CCFD cellular system, respectively. The first technique is obtained by modeling the three-node CCFD system as the Z-channel. After deriving the sum-capacity of the Z-channel, a sum-capacity-achieving scheme based on successive interference cancellation(SIC) is proposed. The second technique is designed by combining the fractional frequency reuse scheme with CCFD. The performance gains of the proposed two techniques in terms of signalto-interference plus noise ratio(SINR) and sumcapacity are analyzed. Simulation results show that the proposed scheme can achieve significant interference suppression performance and higher system capacity, especially for cell edge users.展开更多
A method based on the maximum a posteriori probability （MAP） criterion is proposed to estimate the channel frequency response （CFR） matrix and interference- plus-noise spatial covariance matrix （SCM） for multipl...A method based on the maximum a posteriori probability （MAP） criterion is proposed to estimate the channel frequency response （CFR） matrix and interference- plus-noise spatial covariance matrix （SCM） for multiple input and multiple output orthogonal frequency division multiplexing （MIMO-OFDM） systems. An iterative solution is proposed to solve the MAP-based problem and an interference rejection combining （IRC） receiver is derived to suppress co-channel interference （CCI） based on the estimated CFR and SCM. Furthermore, considering the property of SCM, i. e., Hermitian and semi-definite, two schemes are proposed to improve the accuracy of SCM estimation. The first scheme is proposed to parameterize the SCM via a sum of a series of matrices in the time domain. The second scheme measures the SCM on each subcarrier as a low-rank model while the model order can be chosen through the penalized-likelihood approach. Simulation results are provided to demonstrate the effectiveness of the proposed method.展开更多
Focusing on the unclear mechanism of aerodynamic interference in overlapping rotors of heavy-load electric vertical take-off and landing(eVTOL)aircraft,this paper aims to reveal the aerodynamic interference characteri...Focusing on the unclear mechanism of aerodynamic interference in overlapping rotors of heavy-load electric vertical take-off and landing(eVTOL)aircraft,this paper aims to reveal the aerodynamic interference characteristics and flow field evolution laws of overlapping rotor configurations in hovering conditions through numerical simulation methods.The research method involves constructing a computational model for rotor flow fields and aerodynamic characteristics based on the Reynolds-averaged Navier-Stokes(RANS)equations and the Spalart-Allmaras(S-A)turbulence model.The dynamic simulation of rotor rotational motion was achieved by using the moving nested grid technology.The reliability of the computational method was ensured through the grid independence verification and the comparison with experimental data.The research results indicate that in overlapping rotor systems,rotorⅡexperiences a decrease in thrust,significant power fluctuations,and reduced hovering efficiency due to continuous interference from the adjacent rotor’s wake and blade-vortex interactions.Blade-tip vortices undergo breakage,fusion,and secondary rolling in the overlapping region,forming large-scale turbulent structures that lead to attenuation of the induced velocity field and aerodynamic efficiency losses.Additionally,the interaction between the rotor downwash and the fuselage triggers a“fountain effect”and a sudden increase in surface pressure on the fuselage,exacerbating flow field distortion.Based on the aforementioned mechanisms,the safe flight of overlapping rotor configurations can be achieved by optimizing the configuration strategy of the rotational speed phase difference between adjacent blades.This study provides a theoretical basis for the rotor layout design and the aerodynamic performance enhancement of heavy-load eVTOL aircraft.展开更多
The advancement of next-generation high-frequency communication systems and stealth detection technologies necessitate the development of efficient,multi-spectrum compatible shielding materials.However,the achievement...The advancement of next-generation high-frequency communication systems and stealth detection technologies necessitate the development of efficient,multi-spectrum compatible shielding materials.However,the achievement of simultaneous high efficiency and low reflectivity across microwave,terahertz,and infrared spectra remains a formidable challenge.Herein,a carbonized MXene/polyimide(C-MXene/PI)aerogel material integrating a spatially coupled hierarchically anisotropic structure with stepwise conductivity gradients was constructed.Electromagnetic waves propagate through the top-down vertical disordered horizontal architecture and progressive conductivity gradient of C-MXene/PI aerogel,undergoing stepwise absorption-dissipation-re-dissipation processes.The C-MXene/PI aerogel exhibits an average electromagnetic interference(EMI)shielding effectiveness of91.0 dB in X-band and a reflection coefficient of 0.40.In the terahertz frequency band,the average EMI shielding performance reaches66.2 dB with a reflection coefficient of 0.33.Furthermore,the heterolayered porous architecture of C-MXene/PI aerogels exhibits low thermal conductivity and reduced infrared emissivity,enabling exceptional infrared stealth capability across the 2-16μm wavelength spectrum.This study provides an feasible strategy for constructing low-reflectivity multi-spectrum compatible shielding materials.展开更多
A method for correlating thermal light over a wide spectral range is proposed.A multi-wavelength pseudothermal source,prepared by projecting laser beams of multiple wavelengths(650 nm,635 nm,532 nm,and 473 nm)onto a m...A method for correlating thermal light over a wide spectral range is proposed.A multi-wavelength pseudothermal source,prepared by projecting laser beams of multiple wavelengths(650 nm,635 nm,532 nm,and 473 nm)onto a moving thin ground glass plate,is employed in a double-slit interference experiment.The ground glass plate induces random phase differences between light beams of different wavelengths passing through it.This initial random phase difference significantly influences the high-order intensity correlation functions of multi-wavelength thermal beams.Experimentally,second-order correlated interference patterns,including subwavelength interference,of pseudothermal beams with different wavelengths are observed in the intensity correlation measurements.This method facilitates applications of correlated thermal photons in quantum information processing and quantum imaging.展开更多
With the rapid development of intelligent electronic and military equipment,multifunctional flexible materials that integrat electromagnetic interference(EMI)shielding,temperature sensing,and information encryption ar...With the rapid development of intelligent electronic and military equipment,multifunctional flexible materials that integrat electromagnetic interference(EMI)shielding,temperature sensing,and information encryption are urgently required.This study presents a bio-inspired hierarchical composite foam fabricated using supercritical nitrogen foaming technology.This material exhibits a honeycomb structure,with pore cell sizes controllable within a range of 30–92μm by regulating the filler.The carbon fiber felt(CFf)provides efficient reflection of electromagnetic waves,while the chloroprene rubber/carbon fiber/carbon black foam facilitates both wave absorption and temperature monitoring through its optimized conductive network.This synergistic mechanism results in an EMI shielding effectiveness(SE)of 60.06 d B with excellent temperature sensing performance(The temperature coefficient of resistance(TCR)is-2.642%/℃)in the 24–70℃ range.Notably,the material has a thermal conductivity of up to 0.159 W/(m·K),and the bio-inspired layered design enables information encryption,demonstrating the material's potential for secure communication applications.The foam also has tensile properties of up to 5.13 MPa and a tear strength of 33.02 N/mm.This biomimetic design overcomes the traditional limitations of flexible materials and provides a transformative solution for next-generation applications such as flexible electronics,aerospace systems and military equipment,which urgently need integrated electromagnetic protection,thermal management and information security.展开更多
In this study,an architecture featuring a gradient conductive network structure and three-dimensional dual-continuous network structure is constructed in a carbon nanotubes/cellulose-boron nitride/poly(vinyl alcohol)(...In this study,an architecture featuring a gradient conductive network structure and three-dimensional dual-continuous network structure is constructed in a carbon nanotubes/cellulose-boron nitride/poly(vinyl alcohol)(CNT/cellulose-BN/PVA)composite.Using cellulose aerogel as a template,CNT were incorporated into the cellulose template by vertically impregnating the CNT suspension.Following the impregnation of BN/PVA and high-pressure compression,three-dimensional dual-continuous network structure was successfully constructed in the CNT/cellulose-BN/PVA composite.The comprehensive performance of the composite,including electromagnetic interference(EMI)shielding and Joule heating performance,was investigated.The results indicate that the total EMI shielding effectiveness(SE)for the CNT/cellulose-BN/PVA composite reveals similar values for electromagnetic waves incident from different directions,but totally different shielding mechanisms.For the CNT/cellulose-BN/PVA composite with three impregnation cycles of CNT,the EMI SE values exceeded 39 dB for electromagnetic waves incident from both the high-and low-CNT-content sides.93%of the microwaves were reflected when electromagnetic waves were incident from the high-CNT-content side,while the reflection coefficient decreased to 0.44 for the transverse direction.In addition,the construction of the dual-continuous network structure enabled the composite to exhibit both excellent electrical conductivity and good thermal conductivity simultaneously,endowing the material with good Joule heating performance.CNT/cellulose-BN/PVA composite films have significant potential for application as EMI shielding materials in extremely cold weather.展开更多
High-precision optical frequency measurement serves as a cornerstone of modern science and technology,enabling advancements in fields ranging from fundamental physics to quantum information technologies.Obtaining prec...High-precision optical frequency measurement serves as a cornerstone of modern science and technology,enabling advancements in fields ranging from fundamental physics to quantum information technologies.Obtaining precise photon frequencies,especially in the ultraviolet or even extreme ultraviolet regimes,is a key goal in both light–matter interaction experiments and engineering applications.High-order harmonic generation(HHG)is an ideal light source for producing such photons.In this work,we propose an optical temporal interference model(OTIM)that establishes an analogy with multi-slit Fraunhofer diffraction(MSFD)to manipulate fine-frequency photon generation by exploiting the temporal coherence of HHG processes.Our model provides a unified physical framework for three distinct non-integer HHG generation schemes:single-pulse,shaped-pulse,and laser pulse train approaches,which correspond to single-MSFD-like,double-MSFD-like,and multi-MSFD-like processes,respectively.Arbitrary non-integer HHG photons can be obtained using our scheme.Our approach provides a new perspective for accurately measuring and controlling photon frequencies in fields such as frequency comb technology,interferometry,and atomic clocks.展开更多
Brain lesions,such as those caused by stroke or traumatic brain injury(TBI),frequently result in persistent motor and cognitive impairments that significantly affect the individual patient's quality of life.Despit...Brain lesions,such as those caused by stroke or traumatic brain injury(TBI),frequently result in persistent motor and cognitive impairments that significantly affect the individual patient's quality of life.Despite differences in the mechanisms of injury,both conditions share a high prevalence of motor and cognitive impairments.These deficits show only limited natural recovery.展开更多
To shield electronics from complicated electromagnetic environments caused by wireless electromagnetic waves,achieving elaborately structural manufacturing while not sacrificing electromagnetic interference shielding ...To shield electronics from complicated electromagnetic environments caused by wireless electromagnetic waves,achieving elaborately structural manufacturing while not sacrificing electromagnetic interference shielding performances remains crucial challenges.Herein,we propose a hierarchical manufacturing method that combines the use of 3D printing shear flow field and layer-by-layer assembly for fabricating the structurally customizable and multifunctional polylactic acid@graphene nanoparticle(PLA@GNs)materials.The dynamic behavior of polymer fluids is firstly explored via computational fluid dynamic simulation,and a Weissenberg number is employed to quantitatively analyze the disordered-to-ordered structural evolution of molecular chains and nanoparticles,allowing to tailor the micro-scale ordered structures.Subsequently,the macro-scale 3D architectures of PLA@GNs modules are fabricated by layer-by-layer assembly.Owing to the aligned GNs,the shielding performance reaches 41.2 d B,simultaneously accompanied by a directional thermal conductivity of 3.2 W m^(-1)K^(-1).Moreover,the potential application of 3D-printed shielding modules in specific civilian frequency bands such as 4G(1800–2100 MHz),Bluetooth(2402–2480 MHz),and 5G(3300–3800 MHz)is fully demonstrated.Overall,this work not only establishes a universal methodology about 3D printing shear flow field-driven orientation of two-dimensional nanoparticles within polymer fluids,but also gives a scientific method for advanced manufacturing of the next-generation electromagnetic functional modules for smart electronics.展开更多
We present a compact self-interference incoherent digital holography(SIDH)system that incorporates a quarter-waveplate(QWP)-based geometric phase(GP)lens to achieve high-fidelity,full-color holographic imaging under b...We present a compact self-interference incoherent digital holography(SIDH)system that incorporates a quarter-waveplate(QWP)-based geometric phase(GP)lens to achieve high-fidelity,full-color holographic imaging under broadband incoherent illumination.Traditional SIDH systems that utilize half-waveplate(HWP)-based GP lenses are hindered by unavoidable triple-wavefront polarization interference,stemming from chromatic dispersion in phase retardation.This interference introduces color-dependent artifacts in the reconstructed images.In contrast,our QWP-based design inherently suppresses such interference by using the non-diffracted beam as the reference,enabling stable dual-wavefront modulation.This approach produces phase-encoded polarization interference patterns that remain spectrally consistent across the red,green,and blue(RGB)channels.Experimental results demonstrate substantial noise suppression and significantly improved full-color image fidelity,supported by channelspecific noise analysis and structural similarity metrics.The system also preserves a simplified optical configuration without active polarization control,allowing for compact integration and cost-effective fabrication.These advantages position the proposed QWP-GP SIDH architecture as a promising solution for portable,real-time digital holographic 3D imaging,with scalable potential in applications such as augmented reality,optical diagnostics,and spectral holography.展开更多
Self-trapped excitons(STEs),known for their unique radiative properties,have been harnessed in diverse photonic devices;however,their comprehensive understanding and manipulation remain elusive.In this study,we presen...Self-trapped excitons(STEs),known for their unique radiative properties,have been harnessed in diverse photonic devices;however,their comprehensive understanding and manipulation remain elusive.In this study,we present novel experimental and theoretical evidence revealing the hybrid nature and optical tunability of STE state in Cs_(2)Ag_(0.4)Na_(0.6)InCl_(6).The detection of the Fano resonance in laser energy-dependent Raman and photoluminescence spectra indicates the emergence of an exciton-phonon hybrid state,arising from robust quantum interference between the discrete phonon and continuum exciton states.Moreover,we demonstrate continuous tuning of this hybrid state with the energy and intensity of the laser field.These findings lay the foundation for a comprehensive understanding of the nature of STE and their potential for state control.展开更多
Orthogonal space-time block codes （OSTBCs） are an efficient mean in order to exploit the diversity offered by the wireless multiple-input multiple-output （MIMO） channel. This paper considers capacity problems of O...Orthogonal space-time block codes （OSTBCs） are an efficient mean in order to exploit the diversity offered by the wireless multiple-input multiple-output （MIMO） channel. This paper considers capacity problems of OSTBCs over spatially correlated multiple-input single-out （MISO） Rayleigh fading channels in the presence of spatially correlated Rayleigh co-channel interference and additive Gaussian noise, and derives exact expressions of the ergodic capacity and outage probability （capacity distribution） for such OSTBCs. Some numerical examples are given to illustrate the effect of co-channel interference on the ergodic and outage capacity of OSTBCs.展开更多
Focusing on space-time block code （STBC） systems with unknown co-channel interference, an oblique projection-based robust linear receiver is proposed in this paper.Based on the oblique projection, the desired signal...Focusing on space-time block code （STBC） systems with unknown co-channel interference, an oblique projection-based robust linear receiver is proposed in this paper.Based on the oblique projection, the desired signal subspace and interference-plus-noise subspace are first identified from the received signal.Then the matched filter receiver is used to decode the STBC encoded signals in the desired signal subspace.Simulation results show that the proposed linear receiver obtains significant performance improvement over conventional Capon-type receivers under finite sample-size situations and in the presence of channel estimation errors.展开更多
Heterogeneous network （Het-Net） is part of the long-term evolution advanced （LTE-A） study item and represents cellular deployments with a mixture of cells of different overlapping coverage areas, e.g., a number of...Heterogeneous network （Het-Net） is part of the long-term evolution advanced （LTE-A） study item and represents cellular deployments with a mixture of cells of different overlapping coverage areas, e.g., a number of relay and pico cells overlaid by a macro cell in the same frequency. Traffic balancing and interference management are required in Het-Net design for LTE-A to maintain system performance. In this paper, we propose an inter-domain cooperative traffic balancing scheme focusing on reducing the effective resource cost and mitigating the co-channel interference in multi-domain Het-Net. We first set up the conception of multi-domain in Het-Net and incorporate the co-channel interference into the proposed traffic balancing scheme. Then we model the traffic balancing issue as a multi-domain traffic resource optimization problem for minimizing the effective resource cost. The detailed implementation for the proposed traffic balancing scheme is designed. In the numerical evaluation, the genetic algorithm （GA） as an optimization method is used to demonstrate that the total effective resource cost is significantly reduced through our proposed inter-domain traffic balancing scheme, comparing with the intra-domain traffic balancing scheme. The 43% of the resource cost is saved. In the system level simulation, the performance results of signal interference noise ratio （SINR） and throughput demonstrate that the proposed scheme has great advantages in interference management in Het-Net.展开更多
In terms of the carrier-to-interference-ratio, the performance of co-channel interference in cellular communications systems is studied. The approach is based on an improved analysis, which allows to take into account...In terms of the carrier-to-interference-ratio, the performance of co-channel interference in cellular communications systems is studied. The approach is based on an improved analysis, which allows to take into account some area in the desired sector may not be interfered by some co-channel sectors with exact geometrical analysis, instead of the entire sector interfered by some co-channel sectors. Other features, such as power control and the number of interferences are also included.展开更多
Robust, ultra-flexible, and multifunctional MXene-basedelectromagnetic interference (EMI) shielding nanocomposite filmsexhibit enormous potential for applications in artificial intelligence,wireless telecommunication,...Robust, ultra-flexible, and multifunctional MXene-basedelectromagnetic interference (EMI) shielding nanocomposite filmsexhibit enormous potential for applications in artificial intelligence,wireless telecommunication, and portable/wearable electronic equipment.In this work, a nacre-inspired multifunctional heterocyclic aramid(HA)/MXene@polypyrrole (PPy) (HMP) nanocomposite paper withlarge-scale, high strength, super toughness, and excellent tolerance tocomplex conditions is fabricated through the strategy of HA/MXenehydrogel template-assisted in-situ assembly of PPy. Benefiting from the"brick-and-mortar" layered structure and the strong hydrogen-bondinginteractions among MXene, HA, and PPy, the paper exhibits remarkable mechanical performances, including high tensile strength (309.7 MPa),outstanding toughness (57.6 MJ m−3), exceptional foldability, and structural stability against ultrasonication. By using the template effect ofHA/MXene to guide the assembly of conductive polymers, the synthesized paper obtains excellent electronic conductivity. More importantly,the highly continuous conductive path enables the nanocomposite paper to achieve a splendid EMI shielding effectiveness (EMI SE) of 54.1 dBat an ultra-thin thickness (25.4 μm) and a high specific EMI SE of 17,204.7 dB cm2g−1. In addition, the papers also have excellent applicationsin electromagnetic protection, electro-/photothermal de-icing, thermal therapy, and fire safety. These findings broaden the ideas for developinghigh-performance and multifunctional MXene-based films with enormous application potential in EMI shielding and thermal management.展开更多
Electromagnetic interference(EMI)shielding materials with superior shielding efficiency and low-reflection properties hold promising potential for utilization across electronic components,precision instruments,and fif...Electromagnetic interference(EMI)shielding materials with superior shielding efficiency and low-reflection properties hold promising potential for utilization across electronic components,precision instruments,and fifth-generation communication equipment.In this study,multistage microcellular waterborne polyurethane(WPU)composites were constructed via gradient induction,layer-by-layer casting,and supercritical carbon dioxide foaming.The gradient-structured WPU/ironcobalt loaded reduced graphene oxide(FeCo@rGO)foam serves as an impedance-matched absorption layer,while the highly conductive WPU/silver loaded glass microspheres(Ag@GM)layer is employed as a reflection layer.Thanks to the incorporation of an asymmetric structure,as well as the introduction of gradient and porous configurations,the composite foam demonstrates excellent conductivity,outstanding EMI SE(74.9 dB),and minimal reflection characteristics(35.28%)in 8.2-12.4 GHz,implying that more than 99.99999%of electromagnetic(EM)waves were blocked and only 35.28%were reflected to the external environment.Interestingly,the reflectivity of the composite foam is reduced to 0.41%at 10.88 GHz due to the resonance for incident and reflected EM waves.Beyond that,the composite foam is characterized by low density(0.47 g/cm^(3))and great stability of EMI shielding properties.This work offers a viable approach for craft-ing lightweight,highly shielding,and minimally reflective EMI shielding composites.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.62005205,62071359,and 61775175)Natural Science Basic Research Program of Shaanxi,China(Grant No.2020JQ-331)。
文摘With the rapid development of the fifth-generation(5 G)mobile communication technology,the application of each frequency band has reached the extreme,causing mutual interference between different modules.Hence,there is a requirement for detecting filtering and preventing interference.In the troposphere,over-the-horizon propagation occurs in atmospheric ducts and turbulent media.The effects of both ducting and turbulence can increase the probability of occurrence of long-distance co-channel interference(CCI),in turn,severely affecting the key performance indicators such as system access,handover and drop.In the 5 G era,to ensure communication channels and information security,CCI must be reduced.This paper introduces a scattering parabolic equation algorithm for calculating signal propagation in atmospheric ducts on irregular terrain boundaries.It combines Hitney’s radio physical optical model and Wagner’s nonuniform turbulent scattering model for calculating the tropospheric scattering in an evaporation duct or a surface-based duct.The new model proposes a tropospheric scattering parabolic equation algorithm for various tropospheric duct environments.Finally,as a specific case,the topographical boundaries between several cities in the East China Plain were considered,and the over-the-horizon propagation loss was simulated for various ducting and turbulent environments.The simulation results were used to evaluate whether CCI would occur between cities in a specific environment.
基金jointly supported by the HongKong,Macao and Taiwan Science & Technology Cooperation Program of China(Grant no.2015DFT10170)the Beijing Higher Education Young Elite Teacher Project
文摘Co-frequency and co-time full duplex(CCFD) is a promising technique for improving spectral efficiency in next generation wireless communication systems. However, for the applications of CCFD in a cellular network, severe co-channel interference is an essential problem. Specifically, there are two significant interferences, i.e., inter-terminal interference(ITI) and inter-cell interference(ICI), which lead to an obvious performance degradation. In this paper, two techniques are proposed for suppressing the ITI and ICI in a CCFD cellular system, respectively. The first technique is obtained by modeling the three-node CCFD system as the Z-channel. After deriving the sum-capacity of the Z-channel, a sum-capacity-achieving scheme based on successive interference cancellation(SIC) is proposed. The second technique is designed by combining the fractional frequency reuse scheme with CCFD. The performance gains of the proposed two techniques in terms of signalto-interference plus noise ratio(SINR) and sumcapacity are analyzed. Simulation results show that the proposed scheme can achieve significant interference suppression performance and higher system capacity, especially for cell edge users.
基金The National Natural Science Foundation of China(No.61320106003,61222102)the National High Technology Research and Development Program of China(863 Program)(No.2012AA01A506)
文摘A method based on the maximum a posteriori probability （MAP） criterion is proposed to estimate the channel frequency response （CFR） matrix and interference- plus-noise spatial covariance matrix （SCM） for multiple input and multiple output orthogonal frequency division multiplexing （MIMO-OFDM） systems. An iterative solution is proposed to solve the MAP-based problem and an interference rejection combining （IRC） receiver is derived to suppress co-channel interference （CCI） based on the estimated CFR and SCM. Furthermore, considering the property of SCM, i. e., Hermitian and semi-definite, two schemes are proposed to improve the accuracy of SCM estimation. The first scheme is proposed to parameterize the SCM via a sum of a series of matrices in the time domain. The second scheme measures the SCM on each subcarrier as a low-rank model while the model order can be chosen through the penalized-likelihood approach. Simulation results are provided to demonstrate the effectiveness of the proposed method.
基金supported by the National Natural Science Foundation of China(No.11872211)。
文摘Focusing on the unclear mechanism of aerodynamic interference in overlapping rotors of heavy-load electric vertical take-off and landing(eVTOL)aircraft,this paper aims to reveal the aerodynamic interference characteristics and flow field evolution laws of overlapping rotor configurations in hovering conditions through numerical simulation methods.The research method involves constructing a computational model for rotor flow fields and aerodynamic characteristics based on the Reynolds-averaged Navier-Stokes(RANS)equations and the Spalart-Allmaras(S-A)turbulence model.The dynamic simulation of rotor rotational motion was achieved by using the moving nested grid technology.The reliability of the computational method was ensured through the grid independence verification and the comparison with experimental data.The research results indicate that in overlapping rotor systems,rotorⅡexperiences a decrease in thrust,significant power fluctuations,and reduced hovering efficiency due to continuous interference from the adjacent rotor’s wake and blade-vortex interactions.Blade-tip vortices undergo breakage,fusion,and secondary rolling in the overlapping region,forming large-scale turbulent structures that lead to attenuation of the induced velocity field and aerodynamic efficiency losses.Additionally,the interaction between the rotor downwash and the fuselage triggers a“fountain effect”and a sudden increase in surface pressure on the fuselage,exacerbating flow field distortion.Based on the aforementioned mechanisms,the safe flight of overlapping rotor configurations can be achieved by optimizing the configuration strategy of the rotational speed phase difference between adjacent blades.This study provides a theoretical basis for the rotor layout design and the aerodynamic performance enhancement of heavy-load eVTOL aircraft.
基金supported by the Fundamental Research Funds for the Central Universities under No.2024KQ130the National Natural Science Foundation of China(No.52373259)。
文摘The advancement of next-generation high-frequency communication systems and stealth detection technologies necessitate the development of efficient,multi-spectrum compatible shielding materials.However,the achievement of simultaneous high efficiency and low reflectivity across microwave,terahertz,and infrared spectra remains a formidable challenge.Herein,a carbonized MXene/polyimide(C-MXene/PI)aerogel material integrating a spatially coupled hierarchically anisotropic structure with stepwise conductivity gradients was constructed.Electromagnetic waves propagate through the top-down vertical disordered horizontal architecture and progressive conductivity gradient of C-MXene/PI aerogel,undergoing stepwise absorption-dissipation-re-dissipation processes.The C-MXene/PI aerogel exhibits an average electromagnetic interference(EMI)shielding effectiveness of91.0 dB in X-band and a reflection coefficient of 0.40.In the terahertz frequency band,the average EMI shielding performance reaches66.2 dB with a reflection coefficient of 0.33.Furthermore,the heterolayered porous architecture of C-MXene/PI aerogels exhibits low thermal conductivity and reduced infrared emissivity,enabling exceptional infrared stealth capability across the 2-16μm wavelength spectrum.This study provides an feasible strategy for constructing low-reflectivity multi-spectrum compatible shielding materials.
基金supported by the National Natural Science Foundation of China(Grant Nos.62105278 and 11674273)the Natural Science Foundation of Shandong Province(Grant No.ZR2023MA015)。
文摘A method for correlating thermal light over a wide spectral range is proposed.A multi-wavelength pseudothermal source,prepared by projecting laser beams of multiple wavelengths(650 nm,635 nm,532 nm,and 473 nm)onto a moving thin ground glass plate,is employed in a double-slit interference experiment.The ground glass plate induces random phase differences between light beams of different wavelengths passing through it.This initial random phase difference significantly influences the high-order intensity correlation functions of multi-wavelength thermal beams.Experimentally,second-order correlated interference patterns,including subwavelength interference,of pseudothermal beams with different wavelengths are observed in the intensity correlation measurements.This method facilitates applications of correlated thermal photons in quantum information processing and quantum imaging.
基金financially supported by the Natural Science Foundation of Shandong Province(No.ZR2024QE446)。
文摘With the rapid development of intelligent electronic and military equipment,multifunctional flexible materials that integrat electromagnetic interference(EMI)shielding,temperature sensing,and information encryption are urgently required.This study presents a bio-inspired hierarchical composite foam fabricated using supercritical nitrogen foaming technology.This material exhibits a honeycomb structure,with pore cell sizes controllable within a range of 30–92μm by regulating the filler.The carbon fiber felt(CFf)provides efficient reflection of electromagnetic waves,while the chloroprene rubber/carbon fiber/carbon black foam facilitates both wave absorption and temperature monitoring through its optimized conductive network.This synergistic mechanism results in an EMI shielding effectiveness(SE)of 60.06 d B with excellent temperature sensing performance(The temperature coefficient of resistance(TCR)is-2.642%/℃)in the 24–70℃ range.Notably,the material has a thermal conductivity of up to 0.159 W/(m·K),and the bio-inspired layered design enables information encryption,demonstrating the material's potential for secure communication applications.The foam also has tensile properties of up to 5.13 MPa and a tear strength of 33.02 N/mm.This biomimetic design overcomes the traditional limitations of flexible materials and provides a transformative solution for next-generation applications such as flexible electronics,aerospace systems and military equipment,which urgently need integrated electromagnetic protection,thermal management and information security.
基金financially supported by the National Natural Science Foundation of China(No.52103127)the Opening Project of the State Key Laboratory of Polymer Materials Engineering(Sichuan University)(No.sklpme2022-4-10)Shaanxi Provincial Science and Technology Department(No.2025GH-YBXM-042).
文摘In this study,an architecture featuring a gradient conductive network structure and three-dimensional dual-continuous network structure is constructed in a carbon nanotubes/cellulose-boron nitride/poly(vinyl alcohol)(CNT/cellulose-BN/PVA)composite.Using cellulose aerogel as a template,CNT were incorporated into the cellulose template by vertically impregnating the CNT suspension.Following the impregnation of BN/PVA and high-pressure compression,three-dimensional dual-continuous network structure was successfully constructed in the CNT/cellulose-BN/PVA composite.The comprehensive performance of the composite,including electromagnetic interference(EMI)shielding and Joule heating performance,was investigated.The results indicate that the total EMI shielding effectiveness(SE)for the CNT/cellulose-BN/PVA composite reveals similar values for electromagnetic waves incident from different directions,but totally different shielding mechanisms.For the CNT/cellulose-BN/PVA composite with three impregnation cycles of CNT,the EMI SE values exceeded 39 dB for electromagnetic waves incident from both the high-and low-CNT-content sides.93%of the microwaves were reflected when electromagnetic waves were incident from the high-CNT-content side,while the reflection coefficient decreased to 0.44 for the transverse direction.In addition,the construction of the dual-continuous network structure enabled the composite to exhibit both excellent electrical conductivity and good thermal conductivity simultaneously,endowing the material with good Joule heating performance.CNT/cellulose-BN/PVA composite films have significant potential for application as EMI shielding materials in extremely cold weather.
基金supported by the National Natural Science Foundation of China(Grant No.12304379)the Natural Science Foundation of Liaoning Province(Grant No.2024BS-269)the Guangdong Basic and Applied Basic Research Foundation(Grant No.025A1515011117)。
文摘High-precision optical frequency measurement serves as a cornerstone of modern science and technology,enabling advancements in fields ranging from fundamental physics to quantum information technologies.Obtaining precise photon frequencies,especially in the ultraviolet or even extreme ultraviolet regimes,is a key goal in both light–matter interaction experiments and engineering applications.High-order harmonic generation(HHG)is an ideal light source for producing such photons.In this work,we propose an optical temporal interference model(OTIM)that establishes an analogy with multi-slit Fraunhofer diffraction(MSFD)to manipulate fine-frequency photon generation by exploiting the temporal coherence of HHG processes.Our model provides a unified physical framework for three distinct non-integer HHG generation schemes:single-pulse,shaped-pulse,and laser pulse train approaches,which correspond to single-MSFD-like,double-MSFD-like,and multi-MSFD-like processes,respectively.Arbitrary non-integer HHG photons can be obtained using our scheme.Our approach provides a new perspective for accurately measuring and controlling photon frequencies in fields such as frequency comb technology,interferometry,and atomic clocks.
基金supported by the Defitech Foundation(Morges,CH)to FCHthe Bertarelli Foundation-Catalyst program(Gstaad,CH)to FCH+2 种基金the Wyss Center for Bio and Neuroengineering the Lighthouse Partnership for AI-guided Neuromodulation to FCHthe Fonds de recherche du Quebec-Sante(FRQS#342969)to CEPthe Neuro X Postdoctoral Fellowship Program to CEP。
文摘Brain lesions,such as those caused by stroke or traumatic brain injury(TBI),frequently result in persistent motor and cognitive impairments that significantly affect the individual patient's quality of life.Despite differences in the mechanisms of injury,both conditions share a high prevalence of motor and cognitive impairments.These deficits show only limited natural recovery.
基金financially supported by the National Natural Science Foundation of China(52303036)the Natural Science Foundation of Guangxi(2024GXNSFBA010123)+2 种基金the International Science&Technology Innovation Cooperation Project of Sichuan Province(2024YFHZ0232)the International Science&Technology Cooperation Project of Chengdu(2021-GH03-00009-HZ)the Opening Project of State Key Laboratory of Polymer Materials Engineering(Sichuan University)(Sklpme2023-3-18)。
文摘To shield electronics from complicated electromagnetic environments caused by wireless electromagnetic waves,achieving elaborately structural manufacturing while not sacrificing electromagnetic interference shielding performances remains crucial challenges.Herein,we propose a hierarchical manufacturing method that combines the use of 3D printing shear flow field and layer-by-layer assembly for fabricating the structurally customizable and multifunctional polylactic acid@graphene nanoparticle(PLA@GNs)materials.The dynamic behavior of polymer fluids is firstly explored via computational fluid dynamic simulation,and a Weissenberg number is employed to quantitatively analyze the disordered-to-ordered structural evolution of molecular chains and nanoparticles,allowing to tailor the micro-scale ordered structures.Subsequently,the macro-scale 3D architectures of PLA@GNs modules are fabricated by layer-by-layer assembly.Owing to the aligned GNs,the shielding performance reaches 41.2 d B,simultaneously accompanied by a directional thermal conductivity of 3.2 W m^(-1)K^(-1).Moreover,the potential application of 3D-printed shielding modules in specific civilian frequency bands such as 4G(1800–2100 MHz),Bluetooth(2402–2480 MHz),and 5G(3300–3800 MHz)is fully demonstrated.Overall,this work not only establishes a universal methodology about 3D printing shear flow field-driven orientation of two-dimensional nanoparticles within polymer fluids,but also gives a scientific method for advanced manufacturing of the next-generation electromagnetic functional modules for smart electronics.
基金supported by the National Research Foundation(NRF)funded by the Korean government(MSIT)(No.RS-2024-00416272)supported by Electronics and Telecommunications Research Institute(ETRI)grant funded by ICT R&D program of MSIT/IITP[2019-0-00001,Development of Holo-TV Core Technologies for Hologram Media Services].
文摘We present a compact self-interference incoherent digital holography(SIDH)system that incorporates a quarter-waveplate(QWP)-based geometric phase(GP)lens to achieve high-fidelity,full-color holographic imaging under broadband incoherent illumination.Traditional SIDH systems that utilize half-waveplate(HWP)-based GP lenses are hindered by unavoidable triple-wavefront polarization interference,stemming from chromatic dispersion in phase retardation.This interference introduces color-dependent artifacts in the reconstructed images.In contrast,our QWP-based design inherently suppresses such interference by using the non-diffracted beam as the reference,enabling stable dual-wavefront modulation.This approach produces phase-encoded polarization interference patterns that remain spectrally consistent across the red,green,and blue(RGB)channels.Experimental results demonstrate substantial noise suppression and significantly improved full-color image fidelity,supported by channelspecific noise analysis and structural similarity metrics.The system also preserves a simplified optical configuration without active polarization control,allowing for compact integration and cost-effective fabrication.These advantages position the proposed QWP-GP SIDH architecture as a promising solution for portable,real-time digital holographic 3D imaging,with scalable potential in applications such as augmented reality,optical diagnostics,and spectral holography.
基金funding support from the National Natural Science Foundation of China(Grant No.12525405)funding support from the National Natural Science Foundation of China(Grant No.12393831)the CAS Project for Young Scientists in Basic Research(Grant No.YSBR-120)。
文摘Self-trapped excitons(STEs),known for their unique radiative properties,have been harnessed in diverse photonic devices;however,their comprehensive understanding and manipulation remain elusive.In this study,we present novel experimental and theoretical evidence revealing the hybrid nature and optical tunability of STE state in Cs_(2)Ag_(0.4)Na_(0.6)InCl_(6).The detection of the Fano resonance in laser energy-dependent Raman and photoluminescence spectra indicates the emergence of an exciton-phonon hybrid state,arising from robust quantum interference between the discrete phonon and continuum exciton states.Moreover,we demonstrate continuous tuning of this hybrid state with the energy and intensity of the laser field.These findings lay the foundation for a comprehensive understanding of the nature of STE and their potential for state control.
基金the National Natural Science Foundation of China (Grant No. 60672030)the Open Research Fund of National Mobile Communications Research Laboratory of Southeast University (Grant No. W200810)
文摘Orthogonal space-time block codes （OSTBCs） are an efficient mean in order to exploit the diversity offered by the wireless multiple-input multiple-output （MIMO） channel. This paper considers capacity problems of OSTBCs over spatially correlated multiple-input single-out （MISO） Rayleigh fading channels in the presence of spatially correlated Rayleigh co-channel interference and additive Gaussian noise, and derives exact expressions of the ergodic capacity and outage probability （capacity distribution） for such OSTBCs. Some numerical examples are given to illustrate the effect of co-channel interference on the ergodic and outage capacity of OSTBCs.
基金Supported partially by the National Natural Science Foundation of China (Grant Nos 60572046, 60502022, 60772095)the National High-Tech Research & Development Program of China (Grant No 2006AA01Z220)
文摘Focusing on space-time block code （STBC） systems with unknown co-channel interference, an oblique projection-based robust linear receiver is proposed in this paper.Based on the oblique projection, the desired signal subspace and interference-plus-noise subspace are first identified from the received signal.Then the matched filter receiver is used to decode the STBC encoded signals in the desired signal subspace.Simulation results show that the proposed linear receiver obtains significant performance improvement over conventional Capon-type receivers under finite sample-size situations and in the presence of channel estimation errors.
基金supported by the National Natural Science Foundation of China (60961004/F0104)
文摘Heterogeneous network （Het-Net） is part of the long-term evolution advanced （LTE-A） study item and represents cellular deployments with a mixture of cells of different overlapping coverage areas, e.g., a number of relay and pico cells overlaid by a macro cell in the same frequency. Traffic balancing and interference management are required in Het-Net design for LTE-A to maintain system performance. In this paper, we propose an inter-domain cooperative traffic balancing scheme focusing on reducing the effective resource cost and mitigating the co-channel interference in multi-domain Het-Net. We first set up the conception of multi-domain in Het-Net and incorporate the co-channel interference into the proposed traffic balancing scheme. Then we model the traffic balancing issue as a multi-domain traffic resource optimization problem for minimizing the effective resource cost. The detailed implementation for the proposed traffic balancing scheme is designed. In the numerical evaluation, the genetic algorithm （GA） as an optimization method is used to demonstrate that the total effective resource cost is significantly reduced through our proposed inter-domain traffic balancing scheme, comparing with the intra-domain traffic balancing scheme. The 43% of the resource cost is saved. In the system level simulation, the performance results of signal interference noise ratio （SINR） and throughput demonstrate that the proposed scheme has great advantages in interference management in Het-Net.
基金This workis supported by Applied Basic Research Programs Foundation of Chongqing Municipal Education Commission(050303) .
文摘In terms of the carrier-to-interference-ratio, the performance of co-channel interference in cellular communications systems is studied. The approach is based on an improved analysis, which allows to take into account some area in the desired sector may not be interfered by some co-channel sectors with exact geometrical analysis, instead of the entire sector interfered by some co-channel sectors. Other features, such as power control and the number of interferences are also included.
基金supported by the Fundamental Research Funds for the Central Universities and Heilongjiang Provincial Natural Science Foundation of China(Grant No.YQ2020E009).
文摘Robust, ultra-flexible, and multifunctional MXene-basedelectromagnetic interference (EMI) shielding nanocomposite filmsexhibit enormous potential for applications in artificial intelligence,wireless telecommunication, and portable/wearable electronic equipment.In this work, a nacre-inspired multifunctional heterocyclic aramid(HA)/MXene@polypyrrole (PPy) (HMP) nanocomposite paper withlarge-scale, high strength, super toughness, and excellent tolerance tocomplex conditions is fabricated through the strategy of HA/MXenehydrogel template-assisted in-situ assembly of PPy. Benefiting from the"brick-and-mortar" layered structure and the strong hydrogen-bondinginteractions among MXene, HA, and PPy, the paper exhibits remarkable mechanical performances, including high tensile strength (309.7 MPa),outstanding toughness (57.6 MJ m−3), exceptional foldability, and structural stability against ultrasonication. By using the template effect ofHA/MXene to guide the assembly of conductive polymers, the synthesized paper obtains excellent electronic conductivity. More importantly,the highly continuous conductive path enables the nanocomposite paper to achieve a splendid EMI shielding effectiveness (EMI SE) of 54.1 dBat an ultra-thin thickness (25.4 μm) and a high specific EMI SE of 17,204.7 dB cm2g−1. In addition, the papers also have excellent applicationsin electromagnetic protection, electro-/photothermal de-icing, thermal therapy, and fire safety. These findings broaden the ideas for developinghigh-performance and multifunctional MXene-based films with enormous application potential in EMI shielding and thermal management.
基金supported by the Natural Science Foundation of Anhui Province(No.2308085QE146 and 2208085ME116)the National Natural Science Foundation of China(No.52173039)+1 种基金the Natural Science Foundation of Jiangsu Province(No.BK20210894)the Anhui Provincial Universities Outstanding Youth Research Project(No.2023AH020018).
文摘Electromagnetic interference(EMI)shielding materials with superior shielding efficiency and low-reflection properties hold promising potential for utilization across electronic components,precision instruments,and fifth-generation communication equipment.In this study,multistage microcellular waterborne polyurethane(WPU)composites were constructed via gradient induction,layer-by-layer casting,and supercritical carbon dioxide foaming.The gradient-structured WPU/ironcobalt loaded reduced graphene oxide(FeCo@rGO)foam serves as an impedance-matched absorption layer,while the highly conductive WPU/silver loaded glass microspheres(Ag@GM)layer is employed as a reflection layer.Thanks to the incorporation of an asymmetric structure,as well as the introduction of gradient and porous configurations,the composite foam demonstrates excellent conductivity,outstanding EMI SE(74.9 dB),and minimal reflection characteristics(35.28%)in 8.2-12.4 GHz,implying that more than 99.99999%of electromagnetic(EM)waves were blocked and only 35.28%were reflected to the external environment.Interestingly,the reflectivity of the composite foam is reduced to 0.41%at 10.88 GHz due to the resonance for incident and reflected EM waves.Beyond that,the composite foam is characterized by low density(0.47 g/cm^(3))and great stability of EMI shielding properties.This work offers a viable approach for craft-ing lightweight,highly shielding,and minimally reflective EMI shielding composites.
