Sparse array design has significant implications for improving the accuracy of direction of arrival(DOA)estimation of non-circular(NC)signals.We propose an extended nested array with a filled sensor(ENAFS)based on the...Sparse array design has significant implications for improving the accuracy of direction of arrival(DOA)estimation of non-circular(NC)signals.We propose an extended nested array with a filled sensor(ENAFS)based on the hole-filling strategy.Specifically,we first introduce the improved nested array(INA)and prove its properties.Subsequently,we extend the sum-difference coarray(SDCA)by adding an additional sensor to fill the holes.Thus the larger uniform degrees of freedom(uDOFs)and virtual array aperture(VAA)can be abtained,and the ENAFS is designed.Finally,the simulation results are given to verify the superiority of the proposed ENAFS in terms of DOF,mutual coupling and estimation performance.展开更多
Stroke-induced alterations in cerebral blood flow trigger neurovascular remodeling,as manifested by the blood-brain barrier dysfunction and subs equent neurovascular repair activities such as angiogenesis.This process...Stroke-induced alterations in cerebral blood flow trigger neurovascular remodeling,as manifested by the blood-brain barrier dysfunction and subs equent neurovascular repair activities such as angiogenesis.This process involves neurovascular communication that facilitates the transport of mediators among cerebrovascular endothelial cells,pericytes,glial cells,and neurons,thereby transmitting signals from donor to recipient cells to elicit a collaborative response.展开更多
Cutouts are inevitable in structures due to practical consideration.In order to investigate the free vibration of functionally graded plates with multiple circular and non-circular cutouts,finite element method is use...Cutouts are inevitable in structures due to practical consideration.In order to investigate the free vibration of functionally graded plates with multiple circular and non-circular cutouts,finite element method is used.The volume fraction of the material constituents is assumed to follow a simple power law distribution.The parameters considered in this paper are as follows：cutout size,cutout location,number of cutouts and different boundary conditions.It should be mentioned that free vibration for FG plates（such as rectangular？skew？trapezoidal？circular plates） with multiple cutouts has not been studied yet and hence the results out coming from this paper may be used as bench marks for future works.展开更多
Currently, transplanting mechanisms for dryland plug seedlings in China are mainly semiautomatic and have low efficiency. The rotary seedling pick-up mechanism with a planetary gear train for non-uniform intermittent ...Currently, transplanting mechanisms for dryland plug seedlings in China are mainly semiautomatic and have low efficiency. The rotary seedling pick-up mechanism with a planetary gear train for non-uniform intermittent transmission, and a concave and convex locking arc device, has a large rigid impact. To solve these problems, according to the design requirements for a dryland plug seedling transplanting mechanism, a rotary seedling pick-up mechanism of a planetary gear train with combined non-circular gear transmission of incomplete eccentric circular and noncircular gears was proposed. This has the characteristics of two-times greater fluctuation of the transmission ratio in a cycle, and can achieve a non-uniform continuous drive. Through analysis of the working principle of the seedling pick-up mechanism, its kinematics model was established. The human–computer interaction optimization method and self-developed computer-aided analysis and optimization software were used to obtain a set of parameters that satisfy the operation requirements of the seedling pick-up mechanism. According to the optimized parameters, the structure of the seedling pick-up mechanism was designed, a virtual prototype of the mechanism was created, and a physical prototype was manufactured. A virtual motion simulation of the mechanism was performed, high-speed photographic kinematics tests were conducted, and the kinematic properties of the physical prototype were investigated, whereby the correctness of the theoretical model and the optimized design of the mechanism were verified. Further, laboratory seedling pick-up tests were conducted. The success ratio of seedling pick-up was 93.8% when the seedling pick-up efficiency of the mechanism was 60 plants per minute per row, indicating that the mechanism has a high efficiency and success ratio for seedling pick-up and can be applied to a dryland plug seedling transplanter.展开更多
With the rapid development of the exploitation of underground space, more and more large- or super- large-diameter tunnel-boring machines （TBMs） are being employed to construct underground space projects. At present...With the rapid development of the exploitation of underground space, more and more large- or super- large-diameter tunnel-boring machines （TBMs） are being employed to construct underground space projects. At present, because conventional circular TBMs cannot completely meet the requirements of underground space exploitation regarding the cross-section and space-utilization ratio, non-circular TBMs. which are the tunneling equipment for an ideal cross-section, have become the new market growth point. This paper first presents the technical features and development status of non-circular TBMs. Next, in reference to typical projects and technological innovation, this paper investigates key techniques including shield design optimization, multi-cutterhead excavation, special-shaped segment erection, and soil conditioning in loess strata for a rectangular pipe-jacking machine and a horseshoe-shaped TBM, in order to provide a set of feasible solutions for the design, manufacture, and construction of non-circular TBMs. Relevant engineering practice shows that non-circular TBMs with customized design and manufacture have great advantages in terms of construction schedule, settlement control, and space utilization.展开更多
A propagator-based algorithm for direction of arrival(DOA)estimation of noncoherent one-dimensional(1-D)non-circular sources is presented such as binary phase shift keying(BPSK)and amplitude modulation(AM).The algorit...A propagator-based algorithm for direction of arrival(DOA)estimation of noncoherent one-dimensional(1-D)non-circular sources is presented such as binary phase shift keying(BPSK)and amplitude modulation(AM).The algorithm achieves DOA estimation through searching a 1-D spectrum,which is newly formed on the basis of the rank reduction criterion,and works well without knowledge of the non-circular phases.And then,a search-free implementation of the algorithm is also developed by using the polynomial rooting technique.According to the non-circular property,the algorithm can virtually enlarge the array aperture,thus significantly improving its estimation accuracy and enabling it to handle more sources than the number of sensors.Moreover,the algorithm requires no rotational invariance,so it can be applied to arbitrary array geometry and dispense with the high-complexity procedure of the eigen-decomposition of the correlation sample matrix.Finally,numerical simulations verify the performance and effectiveness of the proposed algorithm.展开更多
For deep tunnel projects,selecting an appropriate initial support distance is critical to improving the self-supporting capacity of surrounding rock.In this work,an intuitive method for determining the tunnel’s initi...For deep tunnel projects,selecting an appropriate initial support distance is critical to improving the self-supporting capacity of surrounding rock.In this work,an intuitive method for determining the tunnel’s initial support distance was proposed.First,based on the convergence-confinement method,a three-dimensional analytical model was constructed by combining an analytical solution of a non-circular tunnel with the Tecplot software.Then,according to the integral failure criteria of rock,the failure tendency coefficients of hard surrounding rock were computed and the spatial distribution plots of that were constructed.On this basis,the tunnel’s key failure positions were identified,and the relationship between the failure tendency coefficient at key failure positions and their distances from the working face was established.Finally,the distance from the working face that corresponds to the critical failure tendency coefficient was taken as the optimal support distance.A practical project was used as an example,and a reasonable initial support distance was successfully determined by applying the developed method.Moreover,it is found that the stability of hard surrounding rock decreases rapidly within the range of 1.0D(D is the tunnel diameter)from the working face,and tends to be stable outside the range of 1.0D.展开更多
Based on the extended homogeneous capacity high precision integration method and the spectrum method of virtual boundary with a complex radius vector, a novel semi-analytical method, which has satisfactory computation...Based on the extended homogeneous capacity high precision integration method and the spectrum method of virtual boundary with a complex radius vector, a novel semi-analytical method, which has satisfactory computation efectiveness and precision, is presented for solving the acoustic radiation from a submerged infnite non-circular cylindrical shell stifened by longitudinal ribs by means of the Fourier integral transformation and stationary phase method. In this work, besides the normal interacting force, which is commonly adopted by some researchers, the other interacting forces and moments between the longitudinal ribs and the non-circular cylindrical shell are considered at the same time. The efects of the number and the size of the cross-section of longitudinal ribs on the characteristics of acoustic radiation are investigated. Numerical results show that the method proposed is more efcient than the existing mixed FE-BE method.展开更多
A novel weft insertion mechanism named eccentric conjugate non-circular gear & crank-rocker & gears train weft insertion mechanism was proposed in order to better meet the requirements of rapier loom's wef...A novel weft insertion mechanism named eccentric conjugate non-circular gear & crank-rocker & gears train weft insertion mechanism was proposed in order to better meet the requirements of rapier loom's weft insertion mechanism as well as reduce the manufacturing difficulty. Meanwhile, based on the working principle of this mechanism, kinematical mathematic models of this mechanism were established and an aided analysis and simulation software was compiled. The influences of eccentricity ratio, deformation coefficient, and other important parameters on the kinematics characteristics of this mechanism were analyzed by using the software. A group of preferable parameters which could meet the requirements of weft insertion technology were obtained by means of human-computer interactive optimization method. The maximum velocity, maximum acceleration, and variation of acceleration of this mechanism are smaller than those of the conjugate cam weft insertion mechanism applied on TT96 rapier loom under the conditions of the same unilateral total stroke of rapier head and the same rotary speed of loom spindle; meanwhile the other demands of weaving technology can be met by this novel weft insertion mechanism.展开更多
This study addresses heat transfer performance of various configurations of coiled non-circular tubes, e.g., in-plane spiral ducts, helical spiral ducts, and conical spiral ducts. The laminar flow of a Newtonian fluid...This study addresses heat transfer performance of various configurations of coiled non-circular tubes, e.g., in-plane spiral ducts, helical spiral ducts, and conical spiral ducts. The laminar flow of a Newtonian fluid in helical coils made of square cross section tubes is simulated using the computational fluid dynamic approach. The effects of tube Reynolds number, fluid Prandtl number, coil diameter, etc., are quantified and discussed. Both constant wall temperature and constant heat flux conditions are simulated. The effect of in-plane coil versus a cylindrical design of constant coil, as well as a conical coil design is discussed. Results are compared with those for a straight square tube of the same length as that used to form the coils. Advantages and limitations of using coiled tubes are discussed in light of the numerical results.展开更多
As the equilibrium fitting code (EFIT) is developing to perform the magnetic andthe kinetic-magnetic analysis for tokamak device operation, it can be not only run in either thefitting mode or the equilibrium mode but ...As the equilibrium fitting code (EFIT) is developing to perform the magnetic andthe kinetic-magnetic analysis for tokamak device operation, it can be not only run in either thefitting mode or the equilibrium mode but also control operation of modern experimental fusiondevice. In this paper the history of EFIT code and its capabilities are described in section 2. Abrief description of the off-line EFIT code and the development of the real-time EFIT (RTEFlT)code is shown in section 3 and 4 respectively. In the last section the summary of this paper isgiven.展开更多
The most important performance of a beating-up mechanism is that the dwelling time of the sley must ensure the completion of the weft insertion. To meet this requirement, a new non-circular combined gear train beating...The most important performance of a beating-up mechanism is that the dwelling time of the sley must ensure the completion of the weft insertion. To meet this requirement, a new non-circular combined gear train beating-up mechanism which is composed of two-stage planetary gear trains is proposed. The first-stage is a Fourier planetary gear train and the second-stage is a non-circular planetary gear train. For designing of this new mechanism, the ideal kinematic equations of the sley are constructed first. Then the kinematic model of the first-stage Fourier planetary gear train is established and the reverse solution for the pitch curves of the second-stage non-circular gears is deduced. With a computer-aided design program, the influences of several important parameters on the pitch curves of the second-stage non-circular gears are analyzed, and a set of preferable structural parameters are obtained. Finally, a test bed of this mechanism is developed and the experimental results show that this new beating-up mechanism can achieve the designed dwelling time, namely it can meet the requirements of beating-up process.展开更多
For the purpose of obtaining satisfactory performance of the non-circular gear & crank-rocker & gear trains (NCCRG) weft insertion mechanism which was proposed in this paper, the ideal kinematic curve of this ...For the purpose of obtaining satisfactory performance of the non-circular gear & crank-rocker & gear trains (NCCRG) weft insertion mechanism which was proposed in this paper, the ideal kinematic curve of this weft insertion mechanism was given, and the reverse solution models of this mechanism were established. A reverse design and simulation software was compiled based on Visual Basic 6.0 to obtain the mechanism parameters, including the pitch curves and tooth profiles of the non-circular gears. A test-bed of this mechanism was developed according to these parameters. The kinematic performance of this weft insertion mechanism was tested by high-speed video tape recorder with its corresponding video analytical software Blaster's MAS. And the test results were identical with the theoretical calculation. Compared with the conjugate cam weft insertion mechanism which is applied on TT96 rapier loom, under the condition of same weft insertion rate, the variation of acceleration of this mechanism is smaller. This novel weft insertion mechanism can meet the requirements of weft insertion on rapier looms with smooth and steady motion.展开更多
A novel spiral non-circular bevel gear that could be applied to variable-speed driving in intersecting axes was proposed by combining the design principles of non-circular bevel gears and the manufacturing principles ...A novel spiral non-circular bevel gear that could be applied to variable-speed driving in intersecting axes was proposed by combining the design principles of non-circular bevel gears and the manufacturing principles of face-milling spiral bevel gears.Unlike straight non-circular bevel gears,spiral non-circular bevel gears have numerous advantages,such as a high contact ratio,high intensity,good dynamic performance,and an adjustable contact region.In addition,while manufacturing straight non-circular bevel gears is difficult,spiral non-circular bevel gears can be efficiently and precisely fabricated with a 6-axis bevel gear cutting machine.First,the generating principles of spiral non-circular bevel gears were introduced.Next,a mathematical model,including a generating tooth profile,tooth spiral,pressure angle,and generated tooth profile for this gear type was established.Then the precision of the model was verified by a tooth contact analysis using FEA,and the contact patterns and stress distributions of the spiral non-circular bevel gears were investigated.展开更多
This paper extends the Non-Circular MUltiple SIgnal Classification(MUSIC)(NC-MUSIC) method for the common array geometries including Uniform Circular Arrays(UCAs) and Uniform Rectangular Arrays(URAs),which enables the...This paper extends the Non-Circular MUltiple SIgnal Classification(MUSIC)(NC-MUSIC) method for the common array geometries including Uniform Circular Arrays(UCAs) and Uniform Rectangular Arrays(URAs),which enables the algorithm to estimate 2-D Direction Of Arrival(DOA).A comparison between UCAs and URAs of NC-MUSIC is made in this paper.The simulations show that the NC-MUSIC method doubles the maximum estimation number of standard MUSIC.Using non-circular signals,the performance of URAs is improved remarkably while the improvement of UCAs is not so significantly.Moreover,the influence of arrays structures on the NC-MUSIC method is discussed.展开更多
A trajectory generation method which is based on NURBS interpolation is studied to improve the fitting accuracy and smoothness of non-circular cross section and obtain higher accuracy of the final non-circular profile...A trajectory generation method which is based on NURBS interpolation is studied to improve the fitting accuracy and smoothness of non-circular cross section and obtain higher accuracy of the final non-circular profile control. After using the NURBS, the most optimized and smooth trajectory for the linear actuator can be obtained. For the purpose of machining the non-circular cross section by CNC turning, the fast response linear actuator has been used. The control algorithm which is compound control of proportional-integral-differential （PID） and iterative learning control has been developed for non-circular profile generation. By using the NURBS interpolation and the compound control of PID and iterative learning control, the final motion accuracy of linear actuator has been improved, therefore, the machining accuracy of the non-circular turning can be improved.展开更多
An Equilibrium Multi-objective Optimization Model(EMOM)with self-regulated weighting factors has been proposed for the optimum design of non-circular clearance hole on the front flange of turbine disk.In the‘‘equili...An Equilibrium Multi-objective Optimization Model(EMOM)with self-regulated weighting factors has been proposed for the optimum design of non-circular clearance hole on the front flange of turbine disk.In the‘‘equilibrium design",both the stress decrease around the hole and the least hole's profile variation are considered,which balances two ambivalent design goals.Specific discrete variables are applied to realize the standardization design in the optimization process,in which a Surrogate Genetic Coding Algorithm(SGCA)is introduced,and a special check module is used to get rid of repeated fitness evaluation of the samples.The method offers an equilibrium design for the non-circular clearance hole of the turbine disk with great accuracy and efficiency.展开更多
In the X-C linkage grinding of non-circular parts,the computation and control method of contour error in polar coordinates platform is different with that in the XY coordinates platform.To solve this problem,the analy...In the X-C linkage grinding of non-circular parts,the computation and control method of contour error in polar coordinates platform is different with that in the XY coordinates platform.To solve this problem,the analysis of the definition and computation methods for contour error and track error in polar coordinates platform will be made.Through the relative lead-lag relation of the linkage axes in the grinding process,the range of the estimation contour error is narrowed and a contour error calculation model is constructed.Then the contour compensation controllers along contour error direction and trajectory tracking error direction are designed respectively,and the error compensation decoupling matrix of the X-C linkage axes is given as well.In the end of this paper,we take the machining of the cylinder contour in Wankel rotary piston engine as an example.A simulation experiment of contour error compensation control based on relative lead-lag quantity is made.The result shows that the designed contour compensation controller can increase the contour machining accuracy effectively.展开更多
According to Hertz theory, the difference of contact stress for non-circular gears and equivalent gears is compared in the paper, a calculating method of contact stress for non-circular gears by using equivalent gears...According to Hertz theory, the difference of contact stress for non-circular gears and equivalent gears is compared in the paper, a calculating method of contact stress for non-circular gears by using equivalent gears is researched, and computing formulas of power and rotation speed for equivalent gears are deduced. A numerical simulation of contact stress for non-circular gears has also been conducted based on the finite element method. By the comparison of fitting curves, the feasibility of using equivalent gears instead of non-circular gears to calculate the contact stress is testified.展开更多
基金supported by China National Science Foundations(Nos.62371225,62371227)。
文摘Sparse array design has significant implications for improving the accuracy of direction of arrival(DOA)estimation of non-circular(NC)signals.We propose an extended nested array with a filled sensor(ENAFS)based on the hole-filling strategy.Specifically,we first introduce the improved nested array(INA)and prove its properties.Subsequently,we extend the sum-difference coarray(SDCA)by adding an additional sensor to fill the holes.Thus the larger uniform degrees of freedom(uDOFs)and virtual array aperture(VAA)can be abtained,and the ENAFS is designed.Finally,the simulation results are given to verify the superiority of the proposed ENAFS in terms of DOF,mutual coupling and estimation performance.
基金supported by the National Natural Science Foundation of China,Nos.82171344(to ZY),82471313(to CKT)the Guangdong Basic and Applied Basic Research Foundation,China,Nos.2023B1515120035,2024A1515012035(to CKT)The Science and Technology Projects in Guangzhou Nos.2025A03J4169(to ZY)。
文摘Stroke-induced alterations in cerebral blood flow trigger neurovascular remodeling,as manifested by the blood-brain barrier dysfunction and subs equent neurovascular repair activities such as angiogenesis.This process involves neurovascular communication that facilitates the transport of mediators among cerebrovascular endothelial cells,pericytes,glial cells,and neurons,thereby transmitting signals from donor to recipient cells to elicit a collaborative response.
文摘Cutouts are inevitable in structures due to practical consideration.In order to investigate the free vibration of functionally graded plates with multiple circular and non-circular cutouts,finite element method is used.The volume fraction of the material constituents is assumed to follow a simple power law distribution.The parameters considered in this paper are as follows：cutout size,cutout location,number of cutouts and different boundary conditions.It should be mentioned that free vibration for FG plates（such as rectangular？skew？trapezoidal？circular plates） with multiple cutouts has not been studied yet and hence the results out coming from this paper may be used as bench marks for future works.
基金Supported by National Key Research and Development Program of China(Project No.2017YFD0700800)Zhejiang Provincial Natural Science Foundation of China(Grant No.LZ16E050003)+1 种基金Natural Science Foundation of China(Grant No.51505429)Science Foundation of Zhejiang Sci-Tech University(Grant No.15022011-Y)
文摘Currently, transplanting mechanisms for dryland plug seedlings in China are mainly semiautomatic and have low efficiency. The rotary seedling pick-up mechanism with a planetary gear train for non-uniform intermittent transmission, and a concave and convex locking arc device, has a large rigid impact. To solve these problems, according to the design requirements for a dryland plug seedling transplanting mechanism, a rotary seedling pick-up mechanism of a planetary gear train with combined non-circular gear transmission of incomplete eccentric circular and noncircular gears was proposed. This has the characteristics of two-times greater fluctuation of the transmission ratio in a cycle, and can achieve a non-uniform continuous drive. Through analysis of the working principle of the seedling pick-up mechanism, its kinematics model was established. The human–computer interaction optimization method and self-developed computer-aided analysis and optimization software were used to obtain a set of parameters that satisfy the operation requirements of the seedling pick-up mechanism. According to the optimized parameters, the structure of the seedling pick-up mechanism was designed, a virtual prototype of the mechanism was created, and a physical prototype was manufactured. A virtual motion simulation of the mechanism was performed, high-speed photographic kinematics tests were conducted, and the kinematic properties of the physical prototype were investigated, whereby the correctness of the theoretical model and the optimized design of the mechanism were verified. Further, laboratory seedling pick-up tests were conducted. The success ratio of seedling pick-up was 93.8% when the seedling pick-up efficiency of the mechanism was 60 plants per minute per row, indicating that the mechanism has a high efficiency and success ratio for seedling pick-up and can be applied to a dryland plug seedling transplanter.
文摘With the rapid development of the exploitation of underground space, more and more large- or super- large-diameter tunnel-boring machines （TBMs） are being employed to construct underground space projects. At present, because conventional circular TBMs cannot completely meet the requirements of underground space exploitation regarding the cross-section and space-utilization ratio, non-circular TBMs. which are the tunneling equipment for an ideal cross-section, have become the new market growth point. This paper first presents the technical features and development status of non-circular TBMs. Next, in reference to typical projects and technological innovation, this paper investigates key techniques including shield design optimization, multi-cutterhead excavation, special-shaped segment erection, and soil conditioning in loess strata for a rectangular pipe-jacking machine and a horseshoe-shaped TBM, in order to provide a set of feasible solutions for the design, manufacture, and construction of non-circular TBMs. Relevant engineering practice shows that non-circular TBMs with customized design and manufacture have great advantages in terms of construction schedule, settlement control, and space utilization.
基金supported in part by Funding for Outstanding Doctoral Dissertation in Nanjing University of Aeronautics and Astronautics (No. BCXJ15 03)the Funding of Jiangsu Innovation Program for Graduate Education (No. KYLX15_0281)the Fundamental Research Funds for the Central Universities
文摘A propagator-based algorithm for direction of arrival(DOA)estimation of noncoherent one-dimensional(1-D)non-circular sources is presented such as binary phase shift keying(BPSK)and amplitude modulation(AM).The algorithm achieves DOA estimation through searching a 1-D spectrum,which is newly formed on the basis of the rank reduction criterion,and works well without knowledge of the non-circular phases.And then,a search-free implementation of the algorithm is also developed by using the polynomial rooting technique.According to the non-circular property,the algorithm can virtually enlarge the array aperture,thus significantly improving its estimation accuracy and enabling it to handle more sources than the number of sensors.Moreover,the algorithm requires no rotational invariance,so it can be applied to arbitrary array geometry and dispense with the high-complexity procedure of the eigen-decomposition of the correlation sample matrix.Finally,numerical simulations verify the performance and effectiveness of the proposed algorithm.
基金Project(2021JLM-49) supported by Natural Science Basic Research Program of Shaanxi-Joint Fund of Hanjiang to Weihe River Valley Water Diversion Project,ChinaProject(42077248) supported by the National Natural Science Foundation of China
文摘For deep tunnel projects,selecting an appropriate initial support distance is critical to improving the self-supporting capacity of surrounding rock.In this work,an intuitive method for determining the tunnel’s initial support distance was proposed.First,based on the convergence-confinement method,a three-dimensional analytical model was constructed by combining an analytical solution of a non-circular tunnel with the Tecplot software.Then,according to the integral failure criteria of rock,the failure tendency coefficients of hard surrounding rock were computed and the spatial distribution plots of that were constructed.On this basis,the tunnel’s key failure positions were identified,and the relationship between the failure tendency coefficient at key failure positions and their distances from the working face was established.Finally,the distance from the working face that corresponds to the critical failure tendency coefficient was taken as the optimal support distance.A practical project was used as an example,and a reasonable initial support distance was successfully determined by applying the developed method.Moreover,it is found that the stability of hard surrounding rock decreases rapidly within the range of 1.0D(D is the tunnel diameter)from the working face,and tends to be stable outside the range of 1.0D.
基金Project supported by the National Natural Science Foundation of China(No.10172038),the Doctoral Foundation ofthe National Education Ministry(No.20040487013)and the Natural Science Foundation of Guangxi(No.0339019).
文摘Based on the extended homogeneous capacity high precision integration method and the spectrum method of virtual boundary with a complex radius vector, a novel semi-analytical method, which has satisfactory computation efectiveness and precision, is presented for solving the acoustic radiation from a submerged infnite non-circular cylindrical shell stifened by longitudinal ribs by means of the Fourier integral transformation and stationary phase method. In this work, besides the normal interacting force, which is commonly adopted by some researchers, the other interacting forces and moments between the longitudinal ribs and the non-circular cylindrical shell are considered at the same time. The efects of the number and the size of the cross-section of longitudinal ribs on the characteristics of acoustic radiation are investigated. Numerical results show that the method proposed is more efcient than the existing mixed FE-BE method.
基金National Natural Science Foundation of China(No.50875243)
文摘A novel weft insertion mechanism named eccentric conjugate non-circular gear & crank-rocker & gears train weft insertion mechanism was proposed in order to better meet the requirements of rapier loom's weft insertion mechanism as well as reduce the manufacturing difficulty. Meanwhile, based on the working principle of this mechanism, kinematical mathematic models of this mechanism were established and an aided analysis and simulation software was compiled. The influences of eccentricity ratio, deformation coefficient, and other important parameters on the kinematics characteristics of this mechanism were analyzed by using the software. A group of preferable parameters which could meet the requirements of weft insertion technology were obtained by means of human-computer interactive optimization method. The maximum velocity, maximum acceleration, and variation of acceleration of this mechanism are smaller than those of the conjugate cam weft insertion mechanism applied on TT96 rapier loom under the conditions of the same unilateral total stroke of rapier head and the same rotary speed of loom spindle; meanwhile the other demands of weaving technology can be met by this novel weft insertion mechanism.
文摘This study addresses heat transfer performance of various configurations of coiled non-circular tubes, e.g., in-plane spiral ducts, helical spiral ducts, and conical spiral ducts. The laminar flow of a Newtonian fluid in helical coils made of square cross section tubes is simulated using the computational fluid dynamic approach. The effects of tube Reynolds number, fluid Prandtl number, coil diameter, etc., are quantified and discussed. Both constant wall temperature and constant heat flux conditions are simulated. The effect of in-plane coil versus a cylindrical design of constant coil, as well as a conical coil design is discussed. Results are compared with those for a straight square tube of the same length as that used to form the coils. Advantages and limitations of using coiled tubes are discussed in light of the numerical results.
文摘As the equilibrium fitting code (EFIT) is developing to perform the magnetic andthe kinetic-magnetic analysis for tokamak device operation, it can be not only run in either thefitting mode or the equilibrium mode but also control operation of modern experimental fusiondevice. In this paper the history of EFIT code and its capabilities are described in section 2. Abrief description of the off-line EFIT code and the development of the real-time EFIT (RTEFlT)code is shown in section 3 and 4 respectively. In the last section the summary of this paper isgiven.
基金National Natural Science Foundation of China(Nos.51675486 51505239 51575496)
文摘The most important performance of a beating-up mechanism is that the dwelling time of the sley must ensure the completion of the weft insertion. To meet this requirement, a new non-circular combined gear train beating-up mechanism which is composed of two-stage planetary gear trains is proposed. The first-stage is a Fourier planetary gear train and the second-stage is a non-circular planetary gear train. For designing of this new mechanism, the ideal kinematic equations of the sley are constructed first. Then the kinematic model of the first-stage Fourier planetary gear train is established and the reverse solution for the pitch curves of the second-stage non-circular gears is deduced. With a computer-aided design program, the influences of several important parameters on the pitch curves of the second-stage non-circular gears are analyzed, and a set of preferable structural parameters are obtained. Finally, a test bed of this mechanism is developed and the experimental results show that this new beating-up mechanism can achieve the designed dwelling time, namely it can meet the requirements of beating-up process.
基金National Natural Science Foundation of China(No.50875243)
文摘For the purpose of obtaining satisfactory performance of the non-circular gear & crank-rocker & gear trains (NCCRG) weft insertion mechanism which was proposed in this paper, the ideal kinematic curve of this weft insertion mechanism was given, and the reverse solution models of this mechanism were established. A reverse design and simulation software was compiled based on Visual Basic 6.0 to obtain the mechanism parameters, including the pitch curves and tooth profiles of the non-circular gears. A test-bed of this mechanism was developed according to these parameters. The kinematic performance of this weft insertion mechanism was tested by high-speed video tape recorder with its corresponding video analytical software Blaster's MAS. And the test results were identical with the theoretical calculation. Compared with the conjugate cam weft insertion mechanism which is applied on TT96 rapier loom, under the condition of same weft insertion rate, the variation of acceleration of this mechanism is smaller. This novel weft insertion mechanism can meet the requirements of weft insertion on rapier looms with smooth and steady motion.
基金Project(52175361)supported by the National Natural Science Foundation of ChinaProject(2019 CFA 041)supported by the Natural Science Foundation of Hubei Province,ChinaProject(WUT:202407002)supported by the Fundamental Research Funds for the Central Universities,China。
文摘A novel spiral non-circular bevel gear that could be applied to variable-speed driving in intersecting axes was proposed by combining the design principles of non-circular bevel gears and the manufacturing principles of face-milling spiral bevel gears.Unlike straight non-circular bevel gears,spiral non-circular bevel gears have numerous advantages,such as a high contact ratio,high intensity,good dynamic performance,and an adjustable contact region.In addition,while manufacturing straight non-circular bevel gears is difficult,spiral non-circular bevel gears can be efficiently and precisely fabricated with a 6-axis bevel gear cutting machine.First,the generating principles of spiral non-circular bevel gears were introduced.Next,a mathematical model,including a generating tooth profile,tooth spiral,pressure angle,and generated tooth profile for this gear type was established.Then the precision of the model was verified by a tooth contact analysis using FEA,and the contact patterns and stress distributions of the spiral non-circular bevel gears were investigated.
文摘This paper extends the Non-Circular MUltiple SIgnal Classification(MUSIC)(NC-MUSIC) method for the common array geometries including Uniform Circular Arrays(UCAs) and Uniform Rectangular Arrays(URAs),which enables the algorithm to estimate 2-D Direction Of Arrival(DOA).A comparison between UCAs and URAs of NC-MUSIC is made in this paper.The simulations show that the NC-MUSIC method doubles the maximum estimation number of standard MUSIC.Using non-circular signals,the performance of URAs is improved remarkably while the improvement of UCAs is not so significantly.Moreover,the influence of arrays structures on the NC-MUSIC method is discussed.
基金the Tenth Five-Year National Science and Technology Key Project of China(No.BA203B04).
文摘A trajectory generation method which is based on NURBS interpolation is studied to improve the fitting accuracy and smoothness of non-circular cross section and obtain higher accuracy of the final non-circular profile control. After using the NURBS, the most optimized and smooth trajectory for the linear actuator can be obtained. For the purpose of machining the non-circular cross section by CNC turning, the fast response linear actuator has been used. The control algorithm which is compound control of proportional-integral-differential （PID） and iterative learning control has been developed for non-circular profile generation. By using the NURBS interpolation and the compound control of PID and iterative learning control, the final motion accuracy of linear actuator has been improved, therefore, the machining accuracy of the non-circular turning can be improved.
文摘An Equilibrium Multi-objective Optimization Model(EMOM)with self-regulated weighting factors has been proposed for the optimum design of non-circular clearance hole on the front flange of turbine disk.In the‘‘equilibrium design",both the stress decrease around the hole and the least hole's profile variation are considered,which balances two ambivalent design goals.Specific discrete variables are applied to realize the standardization design in the optimization process,in which a Surrogate Genetic Coding Algorithm(SGCA)is introduced,and a special check module is used to get rid of repeated fitness evaluation of the samples.The method offers an equilibrium design for the non-circular clearance hole of the turbine disk with great accuracy and efficiency.
基金supported by the Chinese National Natural Science Foundation under Grant(51375056)the Beijing Natural Science Foundation under Grant(3142009)the key of Beijing Natural Science Foundation under Grant(KZ201211232039)
文摘In the X-C linkage grinding of non-circular parts,the computation and control method of contour error in polar coordinates platform is different with that in the XY coordinates platform.To solve this problem,the analysis of the definition and computation methods for contour error and track error in polar coordinates platform will be made.Through the relative lead-lag relation of the linkage axes in the grinding process,the range of the estimation contour error is narrowed and a contour error calculation model is constructed.Then the contour compensation controllers along contour error direction and trajectory tracking error direction are designed respectively,and the error compensation decoupling matrix of the X-C linkage axes is given as well.In the end of this paper,we take the machining of the cylinder contour in Wankel rotary piston engine as an example.A simulation experiment of contour error compensation control based on relative lead-lag quantity is made.The result shows that the designed contour compensation controller can increase the contour machining accuracy effectively.
文摘According to Hertz theory, the difference of contact stress for non-circular gears and equivalent gears is compared in the paper, a calculating method of contact stress for non-circular gears by using equivalent gears is researched, and computing formulas of power and rotation speed for equivalent gears are deduced. A numerical simulation of contact stress for non-circular gears has also been conducted based on the finite element method. By the comparison of fitting curves, the feasibility of using equivalent gears instead of non-circular gears to calculate the contact stress is testified.
