In this paper,the Ni/Al_(2)O_(3) monolithic catalyst with 15%Ni content was prepared using cordierite as a matrix,and the catalyst was modified with 10%NaOH to study the methanation performance of biomass gasification...In this paper,the Ni/Al_(2)O_(3) monolithic catalyst with 15%Ni content was prepared using cordierite as a matrix,and the catalyst was modified with 10%NaOH to study the methanation performance of biomass gasification simulated gas based on alkali-modified Ni/Al_(2)O_(3) monolithic catalyst.BET,TEM,H_(2)-TPR,XRD,CO_(2)-TPD and TG were used to characterize the physicochemical properties of the catalyst before and after modification.The results indicated that the CO conversion rate trends of unmodified and modified Ni/Al_(2)O_(3) monolithic catalysts over 2 h were fundamentally consistent.However,the Ni/Al_(2)O_(3) catalysts modified for 2 h demonstrated significantly enhanced performance compared to those modified for 1 h.Regarding CH4 selectivity,the modified Ni/Al_(2)O_(3) catalyst exhibited markedly better performance than the unmodified Ni/Al_(2)O_(3) catalyst,confirming the enhanced methane performance of the alkali-modified Ni/Al_(2)O_(3) monolithic catalyst.Under optimized conditions(H_(2)/CO volume ratio of 3∶1,space velocity of 10000 mL/(g·h),and temperature of 400℃),the methanation performance of the Ni/Al_(2)O_(3) monolithic catalyst modified for 2 h reached its peak,achieving a CO conversion rate of 97%with 100%CH4 selectivity.展开更多
Electrochemical water splitting represents a sustainable technology for hydrogen(H_(2))production.However,its large-scale implementation is hindered by the high overpotentials required for both the cathodic hydrogen e...Electrochemical water splitting represents a sustainable technology for hydrogen(H_(2))production.However,its large-scale implementation is hindered by the high overpotentials required for both the cathodic hydrogen evolution reaction(HER)and the anodic oxygen evolution reaction(OER).Transition metal-based catalysts have garnered significant research interest as promising alternatives to noble-metal catalysts,owing to their low cost,tunable composition,and noble-metal-like catalytic activity.Nevertheless,systematic reviews on their application as bifunctional catalysts for overall water splitting(OWS)are still limited.This review comprehensively outlines the principal categories of bifunctional transition metal electrocatalysts derived from electrospun nanofibers(NFs),including metals,oxides,phosphides,sulfides,and carbides.Key strategies for enhancing their catalytic performance are systematically summarized,such as heterointerface engineering,heteroatom doping,metal-nonmetal-metal bridging architectures,and single-atom site design.Finally,current challenges and future research directions are discussed,aiming to provide insightful perspectives for the rational design of high-performance electrocatalysts for OWS.展开更多
Catalysts are key for olefin polymerization reactions and are also ubiquitous in catalysis science.Multinuclear metal catalysts have witnessed enhanced performances in catalytic reactions relative to mononuclear catal...Catalysts are key for olefin polymerization reactions and are also ubiquitous in catalysis science.Multinuclear metal catalysts have witnessed enhanced performances in catalytic reactions relative to mononuclear catalysts,but which substantially involve multi-step,tedious,and difficult synthesis.Herein,this study reports an intriguing approach to construct multi-nuclear catalysts for the milestoneα-diimine nickel catalysts using an oligomeric strategy.A polymerizable norbornene unit is incorporated into theα-diimine ligand backbone,leading to the formation of the monomeric nickel catalyst Ni_(1)and its corresponding oligomeric nickel catalysts(Ni_(3)and Ni_(5))with varying degrees of polymerization(DP=3 and 5).Notably,the oligomeric catalyst Ni_(5)was facilely scaled up(50 g-level),showed enhanced thermal stability,exhibited 4.6 times higher activity,and yielded polyethylene elastomer with a 379%increased molecular weight in ethylene polymerization,compared to the monomeric catalyst Ni_(1).Catalytic performance enhancements of oligomeric catalysts were found to be DP-dependent.The kilogram-scale polyethylene,produced using Ni_(5)in a 20 L reactor,presented a highly branched all-hydrocarbon structure,which demonstrated typical elastic properties(tensile strength:4 MPa,elastic recovery:SR=72%)along with great processability(MFI=3.0 g/10 min),insulating characteristics(volume resistivity=2×10^(16)Ω/m),and hydrophobicity(water vapor permeability:0.03 g/m^(2)/day),suggesting potentially practical applications.展开更多
Seawater zinc-air batteries are promising energy storage devices due to their high energy density and utilization of seawater electrolytes.However,their efficiency is hindered by the sluggish oxygen reduction reaction...Seawater zinc-air batteries are promising energy storage devices due to their high energy density and utilization of seawater electrolytes.However,their efficiency is hindered by the sluggish oxygen reduction reaction(ORR)and chlorideinduced degradation over conventional catalysts.In this study,we proposed a universal synthetic strategy to construct heteroatom axially coordinated Fe–N_(4) single-atom seawater catalyst materials(Cl–Fe–N_(4) and S–Fe–N_(4)).X-ray absorption spectroscopy confirmed their five-coordinated square pyramidal structure.Systematic evaluation of catalytic activities revealed that compared with S–Fe–N_(4),Cl–Fe–N_(4) exhibits smaller electrochemical active surface area and specific surface area,yet demonstrates higher limiting current density(5.8 mA cm^(−2)).The assembled zinc-air batteries using Cl–Fe–N_(4) showed superior power density(187.7 mW cm^(−2) at 245.1 mA cm^(−2)),indicating that Cl axial coordination more effectively enhances the intrinsic ORR activity.Moreover,Cl–Fe–N_(4) demonstrates stronger Cl−poisoning resistance in seawater environments.Chronoamperometry tests and zinc-air battery cycling performance evaluations confirmed its enhanced stability.Density functional theory calculations revealed that the introduction of heteroatoms in the axial direction regulates the electron center of Fe single atom,leading to more active reaction intermediates and increased electron density of Fe single sites,thereby enhancing the reduction in adsorbed intermediates and hence the overall ORR catalytic activity.展开更多
Single-atom catalysts(SACs)have demonstrated excellent performance in heterogeneous catalytic reactions owing to their maximized atomic efficiency,distinctive geometric,and electronic configurations.However,the effica...Single-atom catalysts(SACs)have demonstrated excellent performance in heterogeneous catalytic reactions owing to their maximized atomic efficiency,distinctive geometric,and electronic configurations.However,the efficacy of SACs remains limited for certain reactions requiring simultaneous activation of multiple reactants over metallic active sites.Herein,we report an atomically dispersed Pt1Ru1 dual-atom pair site anchored on nanodiamond@graphene(ND@G)for CO oxidation.The Pt1Ru1 dual-atom catalyst shows an exceptional turnover frequency(TOF)of 17.6.10^(-2)s^(-1)at significantly lower temperature(30℃),achieving a tenfold increase in TOF compared to singleatom Pt1/ND@G catalyst(1.5.10^(-2)s^(-1))and surpassing to previously reported Pt-based catalysts under similar conditions.Moreover,the catalyst demonstrates excellent stability,maintaining its activity for 40 h at 80℃without significant deactivation.The superior catalytic performance of Pt-Ru dual-atom catalysts is attributed to the synergistic effect between Pt and Ru atoms with enhanced metallicity for improving simultaneous adsorption and activation of CO and O_(2),and the tuning of conventional competitive reactant adsorption into a non-competitive pathway over dual-atom pair sites.The present work manifests the advantages of dual-atom pair sites in heterogeneous catalysis and paves the way for precise design of catalysts at the atomic scale.展开更多
Heterogeneous polymerization represents a widely employed method in the polyolefin industry.In recent years,various heterogenization strategies for late transition metal catalysts have been developed,enabling effectiv...Heterogeneous polymerization represents a widely employed method in the polyolefin industry.In recent years,various heterogenization strategies for late transition metal catalysts have been developed,enabling effective control of polymer morphology and optimization of catalytic performance.However,while most studies have focused on designing anchoring groups and advancing support approaches,systematic investigations into how the support influences the catalytic behavior of the late transition metal catalysts.In this work,we fabricated supported α-diimine nickel catalysts by functionalizing the ligand with alkyl alcohol chains of varying lengths and supporting them onto MgCl_(2)supports.The ethylene polymerization behavior of these catalysts was then investigated.By precisely adjusting the alkyl alcohol chain length,the distance between the catalytically active metal center and the support surface was modulated.This approach demonstrates that support-induced steric hindrance effect can be effectively regulated by controlling the separation distance between the metal center and the support surface.展开更多
Lithium-sulfur(Li-S)batteries boast a theoretical energy density as high as 2600 Wh·kg^(−1),positioning them as a highly attractive option for future advanced energy storage systems.Challenges such as slow transf...Lithium-sulfur(Li-S)batteries boast a theoretical energy density as high as 2600 Wh·kg^(−1),positioning them as a highly attractive option for future advanced energy storage systems.Challenges such as slow transformation kinetics and shuttle effects associated with lithium polysulfides(LiPSs)have seriously hindered their practical applications.In this paper,we present a new method for the synthesis of hollow carbon-sphere-supported Co monatomic catalysts(Co-N-C).This new synthesis method achieves pyrolytic coordination using a precursor rich in imide(-RC=N-)polymers.This synthesis method not only improves the adsorbability and catalytic activity of LiPS but also significantly weakens the shuttle effect and generates Co-N-C with superior conductivity,abundant hollow structures,and a high specific surface area,thus efficiently capturing and restricting the movement of LiPS intermediates.The dispersed Co monoatomic catalysts(Co SACs)were anchored to a highly conductive nitrogen-doped carbon framework and exhibited symmetric N-coordination active sites(Co-N_(4))to ensure fast redox kinetics of LiPS and Li_(2)S_(2)/Li_(2)S solid-state products.The lithium-sulfur battery with Co-N-C as the sulfur carrier showed excellent discharging capacity of 1146.6 mAh·g^(−1) at a discharge rate of 0.5 C and maintained excellent performance at a high discharge rate of 2 C.The capacity decay rate in 500 cycles was only 0.086%per cycle,reflecting excellent long-term cycle stability.This study highlights the key role of the synergistic effect between single-atom cobalt catalysts and hollow carbon spheres in enhancing the efficiency of lithium-sulfur(Li-S)batteries.It also provides valuable insights into the construction and fabrication of highly active monatomic catalysts.The catalytic conversion efficiency of lithium polysulfides is significantly enhanced when embedded in hollow carbon architectures,which serves as a critical strategy for optimizing the electrochemical behavior of next-generation Li-S batteries.展开更多
Methanol steam reforming(MSR)represents a promising route for hydrogen production,leveraging the high energy density and liquid-phase storage advantages of methanol.Copper-based catalysts have become indispensable for...Methanol steam reforming(MSR)represents a promising route for hydrogen production,leveraging the high energy density and liquid-phase storage advantages of methanol.Copper-based catalysts have become indispensable for MSR due to their cost-effectiveness,exceptional catalytic activity,and tunable selectivity.However,persistent challenges such as thermal sintering,undesirable CO byproduct formation,diminished low-temperature reactivity,and long-term catalyst deactivation limit their broad industrial deployment.This review comprehensively examines the mechanistic pathways of MSR over Cu-based catalysts,with particular focus on differentiating catalyst formulations optimized for high-temperature(>200°C)versus low-temperature(<200°C)operation.It highlights the decisive influence of Cu nanoparticle size,electronic structure,and crystal structure on catalytic performance.Cutting-edge design strategies,including multi-element engineering,innovative synthesis techniques,and deactivation mitigation,are critically evaluated to elucidate mechanistic connections between atomic-scale structure and catalytic performance enhancement.Finally,industrial applications of commercial Cu/ZnO/Al_(2)O_(3)variants and their scalability challenges are discussed,alongside prospective strategies for catalyst innovation and engineering to advance next-generation hydrogen production.展开更多
High‐entropy amorphous catalysts(HEACs)integrate multielement synergy with structural disorder,making them promising candidates for water splitting.Their distinctive features—including flexible coordination environm...High‐entropy amorphous catalysts(HEACs)integrate multielement synergy with structural disorder,making them promising candidates for water splitting.Their distinctive features—including flexible coordination environments,tunable electronic structures,abundant unsaturated active sites,and dynamic structural reassembly—collectively enhance electrochemical activity and durability under operating conditions.This review summarizes recent advances in HEACs for hydrogen evolution,oxygen evolution,and overall water splitting,highlighting their disorder-driven advantages over crystalline counterparts.Catalytic performance benchmarks are presented,and mechanistic insights are discussed,focusing on how multimetallic synergy,amorphization effect,and in‐situ reconstruction cooperatively regulate reaction pathways.These insights provide guidance for the rational design of next‐generation amorphous high‐entropy electrocatalysts with improved efficiency and durability.展开更多
Using photoelectrocatalytic CO_(2) reduction reaction(CO_(2)RR)to produce valuable fuels is a fascinating way to alleviate environmental issues and energy crises.Bismuth-based(Bi-based)catalysts have attracted widespr...Using photoelectrocatalytic CO_(2) reduction reaction(CO_(2)RR)to produce valuable fuels is a fascinating way to alleviate environmental issues and energy crises.Bismuth-based(Bi-based)catalysts have attracted widespread attention for CO_(2)RR due to their high catalytic activity,selectivity,excellent stability,and low cost.However,they still need to be further improved to meet the needs of industrial applications.This review article comprehensively summarizes the recent advances in regulation strategies of Bi-based catalysts and can be divided into six categories:(1)defect engineering,(2)atomic doping engineering,(3)organic framework engineering,(4)inorganic heterojunction engineering,(5)crystal face engineering,and(6)alloying and polarization engineering.Meanwhile,the corresponding catalytic mechanisms of each regulation strategy will also be discussed in detail,aiming to enable researchers to understand the structure-property relationship of the improved Bibased catalysts fundamentally.Finally,the challenges and future opportunities of the Bi-based catalysts in the photoelectrocatalytic CO_(2)RR application field will also be featured from the perspectives of the(1)combination or synergy of multiple regulatory strategies,(2)revealing formation mechanism and realizing controllable synthesis,and(3)in situ multiscale investigation of activation pathways and uncovering the catalytic mechanisms.On the one hand,through the comparative analysis and mechanism explanation of the six major regulatory strategies,a multidimensional knowledge framework of the structure-activity relationship of Bi-based catalysts can be constructed for researchers,which not only deepens the atomic-level understanding of catalytic active sites,charge transport paths,and the adsorption behavior of intermediate products,but also provides theoretical guiding principles for the controllable design of new catalysts;on the other hand,the promising collaborative regulation strategies,controllable synthetic paths,and the in situ multiscale characterization techniques presented in this work provides a paradigm reference for shortening the research and development cycle of high-performance catalysts,conducive to facilitating the transition of photoelectrocatalytic CO_(2)RR technology from the laboratory routes to industrial application.展开更多
Large-scale CO_(2)emissions have exacerbated the greenhouse effect,reinforcing the critical need for efficient CO_(2)mitigation methods.Plasma-catalytic technology enables CO_(2)conversion under mild conditions,especi...Large-scale CO_(2)emissions have exacerbated the greenhouse effect,reinforcing the critical need for efficient CO_(2)mitigation methods.Plasma-catalytic technology enables CO_(2)conversion under mild conditions,especially for CO_(2)methanation(the Sabatier reaction),which has attracted significant attention due to its economic benefits and the potential for safe energy transportation via existing natural gas pipelines.The development of high-performance CO_(2)methanation catalysts remains an ongoing and long-term objective,and there is a lack of adequate in-situ characterization techniques to investigate the mechanisms.This study focuses on the Ni/La_(2)O_(3)(LN)catalyst and introduces two CO_(2)activation strategies through F and Na modifications:the Ni-Ov-Ni site activation with electron transfer from Ni0 under low-power conditions and basic site activation under high-power conditions.The LN-NaF catalysts enhance CO_(2)methanation activity across the entire power range compared to LN,achieving a CO_(2)conversion of 86.3%and CH4 selectivity of 99.4%.Additionally,LN-F(h)reaches a CH4 yield 4.15 times higher than that of LN at low power.Furthermore,in-situ diffuse reflectance infrared Fourier transform(DRIFT)spectroscopy with a self-made reactor are performed under plasma-catalytic conditions to reveal the CO_(2)adsorption and conversion mechanisms,indicating that different dopants(F,Na,and NaF)exhibit promoting effects on different intermediates,resulting in variations in CO_(2)methanation activity.This study provides valuable insights for improving catalyst performance and a thorough comprehension of mechanisms in CO_(2)methanation.展开更多
S and Co co-doped carbon catalysts were prepared via pyrolysis of MOF-71 and thiourea mixtures at 800℃at a mass ratio of MOF-71 to thiourea of 1:0.1 to effectively activate peroxymonosulfate(PMS)for methylene blue(MB...S and Co co-doped carbon catalysts were prepared via pyrolysis of MOF-71 and thiourea mixtures at 800℃at a mass ratio of MOF-71 to thiourea of 1:0.1 to effectively activate peroxymonosulfate(PMS)for methylene blue(MB)degradation.The effects of two different mixing routes were identified on the MB degradation performance.Particularly,the catalyst obtained by the alcohol solvent evaporation(MOF-AEP)mixing route could degrade 95.60%MB(50 mg/L)within 4 min(degradation rate:K=0.78 min^(-1)),which was faster than that derived from the direct grinding method(MOF-DGP,80.97%,K=0.39 min^(-1)).X-ray photoelectron spectroscopy revealed that the Co-S content of MOF-AEP(43.39at%)was less than that of MOF-DGP(54.73at%),and the proportion of C-S-C in MOF-AEP(13.56at%)was higher than that of MOF-DGP(10.67at%).Density functional theory calculations revealed that the adsorption energy of Co for PMS was -2.94 eV when sulfur was doped as C-S-C on the carbon skeleton,which was higher than that when sulfur was doped next to cobalt in the form of Co-S bond(-2.86 eV).Thus,the C-S-C sites might provide more contributions to activate PMS compared with Co-S.Furthermore,the degradation parameters,including pH and MOF-AEP dosage,were investigated.Finally,radical quenching experiments and electron paramagnetic resonance(EPR)measurements revealed that ^(1)O_(2)might be the primary catalytic species,whereas·O~(2-)might be the secondary one in degrading MB.展开更多
Green hydrogen from water splitting has emerged as a critical energy vector with the potential to spearhead the global transition to a fossil fuel-independent society.The field of catalysis has been revolutionized by ...Green hydrogen from water splitting has emerged as a critical energy vector with the potential to spearhead the global transition to a fossil fuel-independent society.The field of catalysis has been revolutionized by single-atom catalysts(SACs),which exhibit unique and intricate interactions between atomically dispersed metal atoms and their supports.Recently,bimetallic SACs(bimSACs)have garnered significant attention for leveraging the synergistic functions of two metal ions coordinated on appropriately designed supports.BimSACs offer an avenue for rich metal–metal and metal–support cooperativity,potentially addressing current limitations of SACs in effectively furnishing transformations which involve synchronous proton–electron exchanges,substrate activation with reversible redox cycles,simultaneous multi-electron transfer,regulation of spin states,tuning of electronic properties,and cyclic transition states with low activation energies.This review aims to encapsulate the growing advancements in bimSACs,with an emphasis on their pivotal role in hydrogen generation via water splitting.We subsequently delve into advanced experimental methodologies for the elaborate characterization of SACs,elucidate their electronic properties,and discuss their local coordination environment.Overall,we present comprehensive discussion on the deployment of bimSACs in both hydrogen evolution reaction and oxygen evolution reaction,the two half-reactions of the water electrolysis process.展开更多
Supported metal catalysts are the backbone of heterogeneous catalysis,playing a crucial role in the modern chemical industry.Metal-support interactions(MSIs)are known important in determining the catalytic performance...Supported metal catalysts are the backbone of heterogeneous catalysis,playing a crucial role in the modern chemical industry.Metal-support interactions(MSIs)are known important in determining the catalytic performance of supported metal catalysts.This is particularly true for single-atom catalysts(SACs)and pseudo-single-atom catalysts(pseudo-SACs),where all metal atoms are dispersed on,and interact directly with the support.Consequently,the MSI of SACs and pseudo-SACs are theoretically more sensitive to modulation compared to that of traditional nanoparticle catalysts.In this work,we experimentally demonstrated this hypothesis by an observed size-dependent MSI modulation.We fabricated CoFe_(2)O_(4) supported Pt pseudo-SACs and nanoparticle catalysts,followed by a straightforward water treatment process.It was found that the covalent strong metal-support interaction(CMSI)in pseudo-SACs can be weakened,leading to a significant activity improvement in methane combustion reaction.This finding aligns with our recent observation of CoFe_(2)O_(4) supported Pt SACs.By contrast,the MSI in Pt nanoparticle catalyst was barely affected by the water treatment,giving rise to almost unchanged catalytic performance.This work highlights the critical role of metal size in determining the MSI modulation,offering a novel strategy for tuning the catalytic performance of SACs and pseudo-SACs by fine-tuning their MSIs.展开更多
With ongoing global warming and increasing energy demands,the CH_(4)-CO_(2)reforming reaction(dry reforming of methane,DRM)has garnered significant attention as a promising carbon capture and utilization technology.Ni...With ongoing global warming and increasing energy demands,the CH_(4)-CO_(2)reforming reaction(dry reforming of methane,DRM)has garnered significant attention as a promising carbon capture and utilization technology.Nickel-based catalysts are renowned for their outstanding activity and selectivity in this process.The impact of metal-support interaction(MSI),on Ni-based catalyst performance has been extensively researched and debated recently.This paper reviews the recent research progress of MSI on Ni-based catalysts and their characterization and modulation strategies in catalytic reactions.From the perspective of MSI,the effects of different carriers(metal oxides,carbon materials and molecular sieves,etc.)are introduced on the dispersion and surface structure of Ni active metal particles,and the effect of MSI on the activity and stability of DRM reactions on Ni-based catalysts is discussed in detail.Future research should focus on better understanding and controlling MSI to improve the performance and durability of nickel-based catalysts in CH_(4)-CO_(2)reforming,advancing cleaner energy technologies.展开更多
Ni-based catalysts are widely applied in the hydrodeoxygenation of lignin derivatives via C-O cleavage for the production of cycloalkanes.However,they often have difficulty in achieving high activity under mild condit...Ni-based catalysts are widely applied in the hydrodeoxygenation of lignin derivatives via C-O cleavage for the production of cycloalkanes.However,they often have difficulty in achieving high activity under mild conditions and exhibit relatively poor stability,and rare studies focus on the cleavage of the stubborn interunit C-C linkages.To address this issue,we developed a Ni@AlPO_(4)/Al_(2)O_(3)catalyst in which the surface of Ni nanoparticles was decorated by AlPO_(4)species,demonstrating excellent catalytic activity and stability in the C-C and C-O cleavages.In the hydrodeoxygenation of guaiacol,this catalyst afforded99.1%conversion and 92.9%yield of cyclohexane under 1 MPa H_(2)at 230℃ for 2 h.More important,this catalyst maintained unchanged performance even after 6 runs with the conversion controlled at about50%,Mecha nistic investigations revealed that the moderate surface coverage of AlPO_(4)on Ni with the formation of Ni^(δ+)-AlPO_(4)interface significantly facilitated the conversion of methoxycyclohexanol and cyclohexanol to cyclohexane,whereas,excess coverage would also block the access to Ni site.Moreover,Ni@AlPO_(4)/Al_(2)O_(3)demonstrated broad applicability in the C-O cleavage of various typical lignin monomers and dimers into cycloalkanes.To our delight,this catalyst also displayed pretty good activity even in the simultaneous cleavage of C-C linkages and C-O bonds for the lignin-derived C-C dimers,achieving cycloalkanes as final products.As a consequence,a 27.1 wt%yield of monocycloalkanes was obtained in the depolymerization of poplar lignin with both C-C and C-O cleavages.展开更多
Exploiting non-precious metal catalysts with excellent oxygen reduction reaction(ORR)performance for energy devices is paramount essential for the green and sustainable society development.Herein,low-cost,high-perform...Exploiting non-precious metal catalysts with excellent oxygen reduction reaction(ORR)performance for energy devices is paramount essential for the green and sustainable society development.Herein,low-cost,high-performance biomass-derived ORR catalysts with an asymmetric Fe-N_(3)P configuration was prepared by a simple pyrolysis-etching technique,where carboxymethyl cellulose(CMC)was used as the carbon source,urea and 1,10-phenanthroline iron complex(FePhen)as additives,and Na_(3)PO_(4)as the phosphorus dopant and a pore-forming agent.The CMC-derived FeNPC catalyst displayed a large specific area(BET:1235 m^(2)g^(-1))with atomically dispersed Fe-N_(3)P active sites,which exhibited superior ORR activity and stability in alkaline solution(E_(1/2)=0.90 V vs.RHE)and Zn-air batteries(P_(max)=149 mW cm^(-2))to commercial Pt/C catalyst(E_(1/2)=0.87 V,P_(max)=118 mW cm^(-2))under similar experimental conditions.This work provides a feasible and costeffective route toward highly efficient ORR catalysts and their application to Zn-air batteries for energy conversion.展开更多
Coal direct liquefaction technology is a crucial contemporary coal chemical technology for efficient and clean use of coal resources. The development of direct coal liquefaction technology and the promotion of alterna...Coal direct liquefaction technology is a crucial contemporary coal chemical technology for efficient and clean use of coal resources. The development of direct coal liquefaction technology and the promotion of alternative energy sources are important measures to guarantee energy security and economic security. However, several challenges need to be addressed, including low conversion rate, inadequate oil yield, significant coking, demanding reaction conditions, and high energy consumption. Extensive research has been conducted on these issues, but further exploration is required in certain aspects such as pyrolysis of macromolecules during the liquefaction process, hydrogen activation, catalysts' performance and stability, solvent hydrogenation, as well as interactions between free radicals to understand their mechanisms better. This paper presents a comprehensive analysis of the design strategy for efficient catalysts in coal liquefaction, encompassing the mechanism of coal liquefaction, catalyst construction,and enhancement of catalytic conversion efficiency. It serves as a comprehensive guide for further research endeavors. Firstly, it systematically summarizes the conversion mechanism of direct coal liquefaction, provides detailed descriptions of various catalyst design strategies, and especially outlines the catalytic mechanism. Furthermore, it addresses the challenges and prospects associated with constructing efficient catalysts for direct coal liquefaction based on an understanding of their action mechanisms.展开更多
The ability to unlock the interplay between the activity and stability of oxygen reduction reaction(ORR)represents an important endeavor toward creating robust ORR catalysts for efficient fuel cells.Herein,we report a...The ability to unlock the interplay between the activity and stability of oxygen reduction reaction(ORR)represents an important endeavor toward creating robust ORR catalysts for efficient fuel cells.Herein,we report an effective strategy to concurrent enhance the activity and stability of ORR catalysts via constructing atomically dispersed Fe-Mn dualmetal sites on N-doped carbon(denoted(FeMn-DA)-N-C)for both anion-exchange membrane fuel cells(AEMFC)and proton exchange membrane fuel cells(PEMFC).The(FeMn-DA)-N-C catalysts possess ample dual-metal atoms consisting of adjacent Fe-N_(4)and Mn-N_(4)sites on the carbon surface,yielded via a facile doping-adsorption-pyrolysis route.The introduction of Mn carries several advantageous attributes:increasing the number of active sites,effectively anchoring Fe due to effective electron transfer to Mn(revealed by X-ray absorption spectroscopy and density-functional theory(DFT),thus preventing the aggregation of Fe),and effectively circumventing the occurrence of Fenton reaction,thus reducing the consumption of Fe.The(FeMn-DA)-N-C catalysts showcase half-wave potentials of 0.92 and 0.82 V in 0.1 M KOH and 0.1 M HClO_(4),respectively,as well as outstanding stability.As manifested by DFT calculations,the introduction of Mn affects the electronic structure of Fe,down-shifts the d-band Fe active center,accelerates the desorption of OH groups,and creates higher limiting potentials.The AEMFC and PEMFC with(FeMn-DA)-N-C as the cathode catalyst display high power densities of 1060 and 746 mW cm^(-2),respectively,underscoring their promising potential for practical applications.Our study highlights the robustness of designing Fe-containing dual-atom ORR catalysts to promote both activity and stability for energy conversion and storage materials and devices.展开更多
In this study,supported Pd catalysts were prepared and used as heterogeneous catalysts for the activation of peroxymonosulfate(PMS)which successfully degrade bisphenol F(BPF).Among the supported catalysts(i.e.,Pd/SiO_...In this study,supported Pd catalysts were prepared and used as heterogeneous catalysts for the activation of peroxymonosulfate(PMS)which successfully degrade bisphenol F(BPF).Among the supported catalysts(i.e.,Pd/SiO_(2),Pd/CeO_(2),Pd/TiO_(2)and Pd/Al2O3),Pd/TiO_(2)exhibited the highest catalytic activity due to the high isoelectric point and high Pd0 content.Pd/TiO_(2)prepared by the deposition method leads to high Pd dispersion,which are the key factors for efficient BPF degradation.The influencing factors were investigated during the reaction process and two possible degradation pathways were proposed.Density functional theory(DFT)calculations demonstrate that stronger BPF adsorption and BPF degradation with lower reaction barrier occurs on smaller Pd particles.The catalytic activities are strongly dependent on the structural features of the catalysts.Both experiments and theoretical calculations prove that the reaction is actuated by electron transfer rather than radicals.展开更多
基金Supported by the National Natural Science Foundation of China(52506188,52476215)Natural Science Foundation of Liaoning Province(2024-MS-139,2024JH3/10200047)Scientific Research Program of Department of Education of Liaoning Province(310125042,LJ212410143033。
文摘In this paper,the Ni/Al_(2)O_(3) monolithic catalyst with 15%Ni content was prepared using cordierite as a matrix,and the catalyst was modified with 10%NaOH to study the methanation performance of biomass gasification simulated gas based on alkali-modified Ni/Al_(2)O_(3) monolithic catalyst.BET,TEM,H_(2)-TPR,XRD,CO_(2)-TPD and TG were used to characterize the physicochemical properties of the catalyst before and after modification.The results indicated that the CO conversion rate trends of unmodified and modified Ni/Al_(2)O_(3) monolithic catalysts over 2 h were fundamentally consistent.However,the Ni/Al_(2)O_(3) catalysts modified for 2 h demonstrated significantly enhanced performance compared to those modified for 1 h.Regarding CH4 selectivity,the modified Ni/Al_(2)O_(3) catalyst exhibited markedly better performance than the unmodified Ni/Al_(2)O_(3) catalyst,confirming the enhanced methane performance of the alkali-modified Ni/Al_(2)O_(3) monolithic catalyst.Under optimized conditions(H_(2)/CO volume ratio of 3∶1,space velocity of 10000 mL/(g·h),and temperature of 400℃),the methanation performance of the Ni/Al_(2)O_(3) monolithic catalyst modified for 2 h reached its peak,achieving a CO conversion rate of 97%with 100%CH4 selectivity.
基金Supported by the National Natural Science Foundation of China(No.52273056)the Science and Technology Development Program of Jilin Province,China(No.YDZJ202501ZYTS305)。
文摘Electrochemical water splitting represents a sustainable technology for hydrogen(H_(2))production.However,its large-scale implementation is hindered by the high overpotentials required for both the cathodic hydrogen evolution reaction(HER)and the anodic oxygen evolution reaction(OER).Transition metal-based catalysts have garnered significant research interest as promising alternatives to noble-metal catalysts,owing to their low cost,tunable composition,and noble-metal-like catalytic activity.Nevertheless,systematic reviews on their application as bifunctional catalysts for overall water splitting(OWS)are still limited.This review comprehensively outlines the principal categories of bifunctional transition metal electrocatalysts derived from electrospun nanofibers(NFs),including metals,oxides,phosphides,sulfides,and carbides.Key strategies for enhancing their catalytic performance are systematically summarized,such as heterointerface engineering,heteroatom doping,metal-nonmetal-metal bridging architectures,and single-atom site design.Finally,current challenges and future research directions are discussed,aiming to provide insightful perspectives for the rational design of high-performance electrocatalysts for OWS.
基金financial support from the National Natural Science Foundation of China(Nos.22401274,U23B6011)the Jilin Provincial Science and Technology Department Program(No.20250102070JC)。
文摘Catalysts are key for olefin polymerization reactions and are also ubiquitous in catalysis science.Multinuclear metal catalysts have witnessed enhanced performances in catalytic reactions relative to mononuclear catalysts,but which substantially involve multi-step,tedious,and difficult synthesis.Herein,this study reports an intriguing approach to construct multi-nuclear catalysts for the milestoneα-diimine nickel catalysts using an oligomeric strategy.A polymerizable norbornene unit is incorporated into theα-diimine ligand backbone,leading to the formation of the monomeric nickel catalyst Ni_(1)and its corresponding oligomeric nickel catalysts(Ni_(3)and Ni_(5))with varying degrees of polymerization(DP=3 and 5).Notably,the oligomeric catalyst Ni_(5)was facilely scaled up(50 g-level),showed enhanced thermal stability,exhibited 4.6 times higher activity,and yielded polyethylene elastomer with a 379%increased molecular weight in ethylene polymerization,compared to the monomeric catalyst Ni_(1).Catalytic performance enhancements of oligomeric catalysts were found to be DP-dependent.The kilogram-scale polyethylene,produced using Ni_(5)in a 20 L reactor,presented a highly branched all-hydrocarbon structure,which demonstrated typical elastic properties(tensile strength:4 MPa,elastic recovery:SR=72%)along with great processability(MFI=3.0 g/10 min),insulating characteristics(volume resistivity=2×10^(16)Ω/m),and hydrophobicity(water vapor permeability:0.03 g/m^(2)/day),suggesting potentially practical applications.
基金funded by the Innovative Research Group Project of the National Natural Science Foundation of China(52121004)the Research Development Fund(No.RDF-21-02-060)by Xi’an Jiaotong-Liverpool University+1 种基金support received from the Suzhou Industrial Park High Quality Innovation Platform of Functional Molecular Materials and Devices(YZCXPT2023105)the XJTLU Advanced Materials Research Center(AMRC).
文摘Seawater zinc-air batteries are promising energy storage devices due to their high energy density and utilization of seawater electrolytes.However,their efficiency is hindered by the sluggish oxygen reduction reaction(ORR)and chlorideinduced degradation over conventional catalysts.In this study,we proposed a universal synthetic strategy to construct heteroatom axially coordinated Fe–N_(4) single-atom seawater catalyst materials(Cl–Fe–N_(4) and S–Fe–N_(4)).X-ray absorption spectroscopy confirmed their five-coordinated square pyramidal structure.Systematic evaluation of catalytic activities revealed that compared with S–Fe–N_(4),Cl–Fe–N_(4) exhibits smaller electrochemical active surface area and specific surface area,yet demonstrates higher limiting current density(5.8 mA cm^(−2)).The assembled zinc-air batteries using Cl–Fe–N_(4) showed superior power density(187.7 mW cm^(−2) at 245.1 mA cm^(−2)),indicating that Cl axial coordination more effectively enhances the intrinsic ORR activity.Moreover,Cl–Fe–N_(4) demonstrates stronger Cl−poisoning resistance in seawater environments.Chronoamperometry tests and zinc-air battery cycling performance evaluations confirmed its enhanced stability.Density functional theory calculations revealed that the introduction of heteroatoms in the axial direction regulates the electron center of Fe single atom,leading to more active reaction intermediates and increased electron density of Fe single sites,thereby enhancing the reduction in adsorbed intermediates and hence the overall ORR catalytic activity.
基金supported by the National Key R&D Program of China (2021YFA1502802)the National Natural Science Foundation of China (U21B2092, 22202213, 22402210, 22502215, 22502214, 22572200, and 22579171)+3 种基金the International Partnership Program of Chinese Academy of Sciences (172GJHZ2022028MI)the Shenyang Bureau of Science and Technology (24-213-3-25)the Natural Science Foundation of Liaoning Province (2025BS0153)Zhongke Technology Achievement Transfer and Transformation Center of Henan Province 2025119
文摘Single-atom catalysts(SACs)have demonstrated excellent performance in heterogeneous catalytic reactions owing to their maximized atomic efficiency,distinctive geometric,and electronic configurations.However,the efficacy of SACs remains limited for certain reactions requiring simultaneous activation of multiple reactants over metallic active sites.Herein,we report an atomically dispersed Pt1Ru1 dual-atom pair site anchored on nanodiamond@graphene(ND@G)for CO oxidation.The Pt1Ru1 dual-atom catalyst shows an exceptional turnover frequency(TOF)of 17.6.10^(-2)s^(-1)at significantly lower temperature(30℃),achieving a tenfold increase in TOF compared to singleatom Pt1/ND@G catalyst(1.5.10^(-2)s^(-1))and surpassing to previously reported Pt-based catalysts under similar conditions.Moreover,the catalyst demonstrates excellent stability,maintaining its activity for 40 h at 80℃without significant deactivation.The superior catalytic performance of Pt-Ru dual-atom catalysts is attributed to the synergistic effect between Pt and Ru atoms with enhanced metallicity for improving simultaneous adsorption and activation of CO and O_(2),and the tuning of conventional competitive reactant adsorption into a non-competitive pathway over dual-atom pair sites.The present work manifests the advantages of dual-atom pair sites in heterogeneous catalysis and paves the way for precise design of catalysts at the atomic scale.
基金financially supported by the National Natural Science Foundation of China(No.52473338)the National Natural Science Foundation of China(Nos.52173004 and 51873055)+3 种基金Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA0540000)Advanced Materials-National Science and Technology Major Project(No.2025ZD0614000)Hebei Natural Science Foundation(No.E2022202015)Anhui Province Science and Technology Innovation Tackling Key Project(No.202423i08050025)。
文摘Heterogeneous polymerization represents a widely employed method in the polyolefin industry.In recent years,various heterogenization strategies for late transition metal catalysts have been developed,enabling effective control of polymer morphology and optimization of catalytic performance.However,while most studies have focused on designing anchoring groups and advancing support approaches,systematic investigations into how the support influences the catalytic behavior of the late transition metal catalysts.In this work,we fabricated supported α-diimine nickel catalysts by functionalizing the ligand with alkyl alcohol chains of varying lengths and supporting them onto MgCl_(2)supports.The ethylene polymerization behavior of these catalysts was then investigated.By precisely adjusting the alkyl alcohol chain length,the distance between the catalytically active metal center and the support surface was modulated.This approach demonstrates that support-induced steric hindrance effect can be effectively regulated by controlling the separation distance between the metal center and the support surface.
基金supported by the National Natural Science Foundation of China(No.52064035)the Key Research and Development Program of Gansu Province,China(No.25YFGA024)the Natural Science Foundation of Zhejiang Province,China(No.LGG22E020003).
文摘Lithium-sulfur(Li-S)batteries boast a theoretical energy density as high as 2600 Wh·kg^(−1),positioning them as a highly attractive option for future advanced energy storage systems.Challenges such as slow transformation kinetics and shuttle effects associated with lithium polysulfides(LiPSs)have seriously hindered their practical applications.In this paper,we present a new method for the synthesis of hollow carbon-sphere-supported Co monatomic catalysts(Co-N-C).This new synthesis method achieves pyrolytic coordination using a precursor rich in imide(-RC=N-)polymers.This synthesis method not only improves the adsorbability and catalytic activity of LiPS but also significantly weakens the shuttle effect and generates Co-N-C with superior conductivity,abundant hollow structures,and a high specific surface area,thus efficiently capturing and restricting the movement of LiPS intermediates.The dispersed Co monoatomic catalysts(Co SACs)were anchored to a highly conductive nitrogen-doped carbon framework and exhibited symmetric N-coordination active sites(Co-N_(4))to ensure fast redox kinetics of LiPS and Li_(2)S_(2)/Li_(2)S solid-state products.The lithium-sulfur battery with Co-N-C as the sulfur carrier showed excellent discharging capacity of 1146.6 mAh·g^(−1) at a discharge rate of 0.5 C and maintained excellent performance at a high discharge rate of 2 C.The capacity decay rate in 500 cycles was only 0.086%per cycle,reflecting excellent long-term cycle stability.This study highlights the key role of the synergistic effect between single-atom cobalt catalysts and hollow carbon spheres in enhancing the efficiency of lithium-sulfur(Li-S)batteries.It also provides valuable insights into the construction and fabrication of highly active monatomic catalysts.The catalytic conversion efficiency of lithium polysulfides is significantly enhanced when embedded in hollow carbon architectures,which serves as a critical strategy for optimizing the electrochemical behavior of next-generation Li-S batteries.
基金supported by the National Natural Science Foundation of China(No.22208374)the Excellent Youth Scientist Award Foundation of Shandong Province(No.ZR2024YQ009)+2 种基金the Distinguished Young Scholars of the National Natural Science Foundation of China(No.22322814)CNPC Innovation Found(2022DQ02-0607)the Fundamental Research Funds for the Central Universities(No.24CX07006A).
文摘Methanol steam reforming(MSR)represents a promising route for hydrogen production,leveraging the high energy density and liquid-phase storage advantages of methanol.Copper-based catalysts have become indispensable for MSR due to their cost-effectiveness,exceptional catalytic activity,and tunable selectivity.However,persistent challenges such as thermal sintering,undesirable CO byproduct formation,diminished low-temperature reactivity,and long-term catalyst deactivation limit their broad industrial deployment.This review comprehensively examines the mechanistic pathways of MSR over Cu-based catalysts,with particular focus on differentiating catalyst formulations optimized for high-temperature(>200°C)versus low-temperature(<200°C)operation.It highlights the decisive influence of Cu nanoparticle size,electronic structure,and crystal structure on catalytic performance.Cutting-edge design strategies,including multi-element engineering,innovative synthesis techniques,and deactivation mitigation,are critically evaluated to elucidate mechanistic connections between atomic-scale structure and catalytic performance enhancement.Finally,industrial applications of commercial Cu/ZnO/Al_(2)O_(3)variants and their scalability challenges are discussed,alongside prospective strategies for catalyst innovation and engineering to advance next-generation hydrogen production.
基金supported by the Australian Research Council(ARC)Projects(DP220101139,DP220101142,and LP240100542).
文摘High‐entropy amorphous catalysts(HEACs)integrate multielement synergy with structural disorder,making them promising candidates for water splitting.Their distinctive features—including flexible coordination environments,tunable electronic structures,abundant unsaturated active sites,and dynamic structural reassembly—collectively enhance electrochemical activity and durability under operating conditions.This review summarizes recent advances in HEACs for hydrogen evolution,oxygen evolution,and overall water splitting,highlighting their disorder-driven advantages over crystalline counterparts.Catalytic performance benchmarks are presented,and mechanistic insights are discussed,focusing on how multimetallic synergy,amorphization effect,and in‐situ reconstruction cooperatively regulate reaction pathways.These insights provide guidance for the rational design of next‐generation amorphous high‐entropy electrocatalysts with improved efficiency and durability.
基金supports from the National Natural Science Foundation of China(Grant Nos.12305372 and 22376217)the National Key Research&Development Program of China(Grant Nos.2022YFA1603802 and 2022YFB3504100)+1 种基金the projects of the key laboratory of advanced energy materials chemistry,ministry of education(Nankai University)key laboratory of Jiangxi Province for persistent pollutants prevention control and resource reuse(2023SSY02061)are gratefully acknowledged.
文摘Using photoelectrocatalytic CO_(2) reduction reaction(CO_(2)RR)to produce valuable fuels is a fascinating way to alleviate environmental issues and energy crises.Bismuth-based(Bi-based)catalysts have attracted widespread attention for CO_(2)RR due to their high catalytic activity,selectivity,excellent stability,and low cost.However,they still need to be further improved to meet the needs of industrial applications.This review article comprehensively summarizes the recent advances in regulation strategies of Bi-based catalysts and can be divided into six categories:(1)defect engineering,(2)atomic doping engineering,(3)organic framework engineering,(4)inorganic heterojunction engineering,(5)crystal face engineering,and(6)alloying and polarization engineering.Meanwhile,the corresponding catalytic mechanisms of each regulation strategy will also be discussed in detail,aiming to enable researchers to understand the structure-property relationship of the improved Bibased catalysts fundamentally.Finally,the challenges and future opportunities of the Bi-based catalysts in the photoelectrocatalytic CO_(2)RR application field will also be featured from the perspectives of the(1)combination or synergy of multiple regulatory strategies,(2)revealing formation mechanism and realizing controllable synthesis,and(3)in situ multiscale investigation of activation pathways and uncovering the catalytic mechanisms.On the one hand,through the comparative analysis and mechanism explanation of the six major regulatory strategies,a multidimensional knowledge framework of the structure-activity relationship of Bi-based catalysts can be constructed for researchers,which not only deepens the atomic-level understanding of catalytic active sites,charge transport paths,and the adsorption behavior of intermediate products,but also provides theoretical guiding principles for the controllable design of new catalysts;on the other hand,the promising collaborative regulation strategies,controllable synthetic paths,and the in situ multiscale characterization techniques presented in this work provides a paradigm reference for shortening the research and development cycle of high-performance catalysts,conducive to facilitating the transition of photoelectrocatalytic CO_(2)RR technology from the laboratory routes to industrial application.
基金supported by the National Natural Science Foundation of China(No.51878292).
文摘Large-scale CO_(2)emissions have exacerbated the greenhouse effect,reinforcing the critical need for efficient CO_(2)mitigation methods.Plasma-catalytic technology enables CO_(2)conversion under mild conditions,especially for CO_(2)methanation(the Sabatier reaction),which has attracted significant attention due to its economic benefits and the potential for safe energy transportation via existing natural gas pipelines.The development of high-performance CO_(2)methanation catalysts remains an ongoing and long-term objective,and there is a lack of adequate in-situ characterization techniques to investigate the mechanisms.This study focuses on the Ni/La_(2)O_(3)(LN)catalyst and introduces two CO_(2)activation strategies through F and Na modifications:the Ni-Ov-Ni site activation with electron transfer from Ni0 under low-power conditions and basic site activation under high-power conditions.The LN-NaF catalysts enhance CO_(2)methanation activity across the entire power range compared to LN,achieving a CO_(2)conversion of 86.3%and CH4 selectivity of 99.4%.Additionally,LN-F(h)reaches a CH4 yield 4.15 times higher than that of LN at low power.Furthermore,in-situ diffuse reflectance infrared Fourier transform(DRIFT)spectroscopy with a self-made reactor are performed under plasma-catalytic conditions to reveal the CO_(2)adsorption and conversion mechanisms,indicating that different dopants(F,Na,and NaF)exhibit promoting effects on different intermediates,resulting in variations in CO_(2)methanation activity.This study provides valuable insights for improving catalyst performance and a thorough comprehension of mechanisms in CO_(2)methanation.
基金financially supported by the National Natural Science Foundation of China(Nos.51602018 and 51902018)the Natural Science Foundation of Beijing Municipality(No.2154052)+3 种基金the China Postdoctoral Science Foundation(No.2014M560044)the Fundamental Research Funds for the Central Universities(No.FRF-MP-20-22)USTB Research Center for International People-to-people Exchange in Science,Technology and Civilization(No.2022KFYB007)Education and Teaching Reform Foundation at University of Science and Technology Beijing(Nos.2023JGC027,KC2022QYW06,and KC2022TS09)。
文摘S and Co co-doped carbon catalysts were prepared via pyrolysis of MOF-71 and thiourea mixtures at 800℃at a mass ratio of MOF-71 to thiourea of 1:0.1 to effectively activate peroxymonosulfate(PMS)for methylene blue(MB)degradation.The effects of two different mixing routes were identified on the MB degradation performance.Particularly,the catalyst obtained by the alcohol solvent evaporation(MOF-AEP)mixing route could degrade 95.60%MB(50 mg/L)within 4 min(degradation rate:K=0.78 min^(-1)),which was faster than that derived from the direct grinding method(MOF-DGP,80.97%,K=0.39 min^(-1)).X-ray photoelectron spectroscopy revealed that the Co-S content of MOF-AEP(43.39at%)was less than that of MOF-DGP(54.73at%),and the proportion of C-S-C in MOF-AEP(13.56at%)was higher than that of MOF-DGP(10.67at%).Density functional theory calculations revealed that the adsorption energy of Co for PMS was -2.94 eV when sulfur was doped as C-S-C on the carbon skeleton,which was higher than that when sulfur was doped next to cobalt in the form of Co-S bond(-2.86 eV).Thus,the C-S-C sites might provide more contributions to activate PMS compared with Co-S.Furthermore,the degradation parameters,including pH and MOF-AEP dosage,were investigated.Finally,radical quenching experiments and electron paramagnetic resonance(EPR)measurements revealed that ^(1)O_(2)might be the primary catalytic species,whereas·O~(2-)might be the secondary one in degrading MB.
基金support from the Czech Science Foundation,project EXPRO,No 19-27454Xsupport by the European Union under the REFRESH—Research Excellence For Region Sustainability and High-tech Industries project number CZ.10.03.01/00/22_003/0000048 via the Operational Programme Just Transition from the Ministry of the Environment of the Czech Republic+1 种基金Horizon Europe project EIC Pathfinder Open 2023,“GlaS-A-Fuels”(No.101130717)supported from ERDF/ESF,project TECHSCALE No.CZ.02.01.01/00/22_008/0004587).
文摘Green hydrogen from water splitting has emerged as a critical energy vector with the potential to spearhead the global transition to a fossil fuel-independent society.The field of catalysis has been revolutionized by single-atom catalysts(SACs),which exhibit unique and intricate interactions between atomically dispersed metal atoms and their supports.Recently,bimetallic SACs(bimSACs)have garnered significant attention for leveraging the synergistic functions of two metal ions coordinated on appropriately designed supports.BimSACs offer an avenue for rich metal–metal and metal–support cooperativity,potentially addressing current limitations of SACs in effectively furnishing transformations which involve synchronous proton–electron exchanges,substrate activation with reversible redox cycles,simultaneous multi-electron transfer,regulation of spin states,tuning of electronic properties,and cyclic transition states with low activation energies.This review aims to encapsulate the growing advancements in bimSACs,with an emphasis on their pivotal role in hydrogen generation via water splitting.We subsequently delve into advanced experimental methodologies for the elaborate characterization of SACs,elucidate their electronic properties,and discuss their local coordination environment.Overall,we present comprehensive discussion on the deployment of bimSACs in both hydrogen evolution reaction and oxygen evolution reaction,the two half-reactions of the water electrolysis process.
文摘Supported metal catalysts are the backbone of heterogeneous catalysis,playing a crucial role in the modern chemical industry.Metal-support interactions(MSIs)are known important in determining the catalytic performance of supported metal catalysts.This is particularly true for single-atom catalysts(SACs)and pseudo-single-atom catalysts(pseudo-SACs),where all metal atoms are dispersed on,and interact directly with the support.Consequently,the MSI of SACs and pseudo-SACs are theoretically more sensitive to modulation compared to that of traditional nanoparticle catalysts.In this work,we experimentally demonstrated this hypothesis by an observed size-dependent MSI modulation.We fabricated CoFe_(2)O_(4) supported Pt pseudo-SACs and nanoparticle catalysts,followed by a straightforward water treatment process.It was found that the covalent strong metal-support interaction(CMSI)in pseudo-SACs can be weakened,leading to a significant activity improvement in methane combustion reaction.This finding aligns with our recent observation of CoFe_(2)O_(4) supported Pt SACs.By contrast,the MSI in Pt nanoparticle catalyst was barely affected by the water treatment,giving rise to almost unchanged catalytic performance.This work highlights the critical role of metal size in determining the MSI modulation,offering a novel strategy for tuning the catalytic performance of SACs and pseudo-SACs by fine-tuning their MSIs.
基金supported by the Natural Science Foundation of Shanxi Province(202203021221155)the Foundation of National Key Laboratory of High Efficiency and Low Carbon Utilization of Coal(J23-24-902)。
文摘With ongoing global warming and increasing energy demands,the CH_(4)-CO_(2)reforming reaction(dry reforming of methane,DRM)has garnered significant attention as a promising carbon capture and utilization technology.Nickel-based catalysts are renowned for their outstanding activity and selectivity in this process.The impact of metal-support interaction(MSI),on Ni-based catalyst performance has been extensively researched and debated recently.This paper reviews the recent research progress of MSI on Ni-based catalysts and their characterization and modulation strategies in catalytic reactions.From the perspective of MSI,the effects of different carriers(metal oxides,carbon materials and molecular sieves,etc.)are introduced on the dispersion and surface structure of Ni active metal particles,and the effect of MSI on the activity and stability of DRM reactions on Ni-based catalysts is discussed in detail.Future research should focus on better understanding and controlling MSI to improve the performance and durability of nickel-based catalysts in CH_(4)-CO_(2)reforming,advancing cleaner energy technologies.
基金supported by National Natural Science Foundation of China(22178258,22308254)China Postdoctoral Science Foundation(2023M742593,2024T170642)+1 种基金Independent Innova-tion Fund of Tianjin University(2024XQM-0021)the Open Fund of the Key Laboratory of Functional Molecular Solids(FMS2023006)。
文摘Ni-based catalysts are widely applied in the hydrodeoxygenation of lignin derivatives via C-O cleavage for the production of cycloalkanes.However,they often have difficulty in achieving high activity under mild conditions and exhibit relatively poor stability,and rare studies focus on the cleavage of the stubborn interunit C-C linkages.To address this issue,we developed a Ni@AlPO_(4)/Al_(2)O_(3)catalyst in which the surface of Ni nanoparticles was decorated by AlPO_(4)species,demonstrating excellent catalytic activity and stability in the C-C and C-O cleavages.In the hydrodeoxygenation of guaiacol,this catalyst afforded99.1%conversion and 92.9%yield of cyclohexane under 1 MPa H_(2)at 230℃ for 2 h.More important,this catalyst maintained unchanged performance even after 6 runs with the conversion controlled at about50%,Mecha nistic investigations revealed that the moderate surface coverage of AlPO_(4)on Ni with the formation of Ni^(δ+)-AlPO_(4)interface significantly facilitated the conversion of methoxycyclohexanol and cyclohexanol to cyclohexane,whereas,excess coverage would also block the access to Ni site.Moreover,Ni@AlPO_(4)/Al_(2)O_(3)demonstrated broad applicability in the C-O cleavage of various typical lignin monomers and dimers into cycloalkanes.To our delight,this catalyst also displayed pretty good activity even in the simultaneous cleavage of C-C linkages and C-O bonds for the lignin-derived C-C dimers,achieving cycloalkanes as final products.As a consequence,a 27.1 wt%yield of monocycloalkanes was obtained in the depolymerization of poplar lignin with both C-C and C-O cleavages.
基金supported by the National Natural Science Foundation of China(No.21571062)the Program for Professor of Special Appointment(Eastern Scholar)at the Shanghai Institutions of Higher Learning to JGL,and the Fundamental Research Funds for the Central Universities(No.222201717003)。
文摘Exploiting non-precious metal catalysts with excellent oxygen reduction reaction(ORR)performance for energy devices is paramount essential for the green and sustainable society development.Herein,low-cost,high-performance biomass-derived ORR catalysts with an asymmetric Fe-N_(3)P configuration was prepared by a simple pyrolysis-etching technique,where carboxymethyl cellulose(CMC)was used as the carbon source,urea and 1,10-phenanthroline iron complex(FePhen)as additives,and Na_(3)PO_(4)as the phosphorus dopant and a pore-forming agent.The CMC-derived FeNPC catalyst displayed a large specific area(BET:1235 m^(2)g^(-1))with atomically dispersed Fe-N_(3)P active sites,which exhibited superior ORR activity and stability in alkaline solution(E_(1/2)=0.90 V vs.RHE)and Zn-air batteries(P_(max)=149 mW cm^(-2))to commercial Pt/C catalyst(E_(1/2)=0.87 V,P_(max)=118 mW cm^(-2))under similar experimental conditions.This work provides a feasible and costeffective route toward highly efficient ORR catalysts and their application to Zn-air batteries for energy conversion.
基金National Natural Science Foundation of China (No. 22208273)Tianchi Talent Plan of Xinjiang Uygur Autonomous RegionPostdoctoral Fellowship Program of CPSF under Grant Number GZC20240428。
文摘Coal direct liquefaction technology is a crucial contemporary coal chemical technology for efficient and clean use of coal resources. The development of direct coal liquefaction technology and the promotion of alternative energy sources are important measures to guarantee energy security and economic security. However, several challenges need to be addressed, including low conversion rate, inadequate oil yield, significant coking, demanding reaction conditions, and high energy consumption. Extensive research has been conducted on these issues, but further exploration is required in certain aspects such as pyrolysis of macromolecules during the liquefaction process, hydrogen activation, catalysts' performance and stability, solvent hydrogenation, as well as interactions between free radicals to understand their mechanisms better. This paper presents a comprehensive analysis of the design strategy for efficient catalysts in coal liquefaction, encompassing the mechanism of coal liquefaction, catalyst construction,and enhancement of catalytic conversion efficiency. It serves as a comprehensive guide for further research endeavors. Firstly, it systematically summarizes the conversion mechanism of direct coal liquefaction, provides detailed descriptions of various catalyst design strategies, and especially outlines the catalytic mechanism. Furthermore, it addresses the challenges and prospects associated with constructing efficient catalysts for direct coal liquefaction based on an understanding of their action mechanisms.
基金supported by the National Key R&D Program of China (2021YFF0500504)National Natural Science Foundation of China (No. 51976169)the financial supports from the Fundamental Research Funds for the Central Universities。
文摘The ability to unlock the interplay between the activity and stability of oxygen reduction reaction(ORR)represents an important endeavor toward creating robust ORR catalysts for efficient fuel cells.Herein,we report an effective strategy to concurrent enhance the activity and stability of ORR catalysts via constructing atomically dispersed Fe-Mn dualmetal sites on N-doped carbon(denoted(FeMn-DA)-N-C)for both anion-exchange membrane fuel cells(AEMFC)and proton exchange membrane fuel cells(PEMFC).The(FeMn-DA)-N-C catalysts possess ample dual-metal atoms consisting of adjacent Fe-N_(4)and Mn-N_(4)sites on the carbon surface,yielded via a facile doping-adsorption-pyrolysis route.The introduction of Mn carries several advantageous attributes:increasing the number of active sites,effectively anchoring Fe due to effective electron transfer to Mn(revealed by X-ray absorption spectroscopy and density-functional theory(DFT),thus preventing the aggregation of Fe),and effectively circumventing the occurrence of Fenton reaction,thus reducing the consumption of Fe.The(FeMn-DA)-N-C catalysts showcase half-wave potentials of 0.92 and 0.82 V in 0.1 M KOH and 0.1 M HClO_(4),respectively,as well as outstanding stability.As manifested by DFT calculations,the introduction of Mn affects the electronic structure of Fe,down-shifts the d-band Fe active center,accelerates the desorption of OH groups,and creates higher limiting potentials.The AEMFC and PEMFC with(FeMn-DA)-N-C as the cathode catalyst display high power densities of 1060 and 746 mW cm^(-2),respectively,underscoring their promising potential for practical applications.Our study highlights the robustness of designing Fe-containing dual-atom ORR catalysts to promote both activity and stability for energy conversion and storage materials and devices.
基金supported by the National Natural Science Foundation of China(NSFC)(No.21978137).
文摘In this study,supported Pd catalysts were prepared and used as heterogeneous catalysts for the activation of peroxymonosulfate(PMS)which successfully degrade bisphenol F(BPF).Among the supported catalysts(i.e.,Pd/SiO_(2),Pd/CeO_(2),Pd/TiO_(2)and Pd/Al2O3),Pd/TiO_(2)exhibited the highest catalytic activity due to the high isoelectric point and high Pd0 content.Pd/TiO_(2)prepared by the deposition method leads to high Pd dispersion,which are the key factors for efficient BPF degradation.The influencing factors were investigated during the reaction process and two possible degradation pathways were proposed.Density functional theory(DFT)calculations demonstrate that stronger BPF adsorption and BPF degradation with lower reaction barrier occurs on smaller Pd particles.The catalytic activities are strongly dependent on the structural features of the catalysts.Both experiments and theoretical calculations prove that the reaction is actuated by electron transfer rather than radicals.
