Globally,approximately 10 million new tuberculosis(TB)cases are reported annually.Delayed diagnosis due to low detection rates is the primary cause of mortality.Although pathological examination is commonly used for d...Globally,approximately 10 million new tuberculosis(TB)cases are reported annually.Delayed diagnosis due to low detection rates is the primary cause of mortality.Although pathological examination is commonly used for diagnosing TB,5%-30%of cases remain undiagnosed,emphasizing the urgent need to establish quality control(QC)standards to reduce rates of misdiagnosis and missed diagnoses.To address this,we introduced a novel QC chip for detecting Mycobacterium tuberculosis(MTB).A quantitative pathological QC model was constructed by precisely and uniformly integrating MTB and HeLa cells into a photocurable hydrogel.This model was then sliced into uniform sections to create QC chips.It demonstrated that the QC chips exhibited no significant differences in intra-batch or inter-batch variation(coefficient of variation<5%),and remained stable at−80°C for one year.Furthermore,these chips were found to be 100%effective when tested with 240 clinical samples(200 with special staining and 40 with polymerase chain reaction).In addition to enhancing TB detection rates,this approach offers visualization,quantification,and sustainable production.Overall,this work provides a novel framework for developing QC chips for pathological testing,offering a reliable solution to enhance clinical diagnostic workflows.展开更多
Presents a one grade adaptive controller with one reference model which is built according to δ MRACS adaptive control theory and used to control an actual high order hydraulic system, and the whole hardware system u...Presents a one grade adaptive controller with one reference model which is built according to δ MRACS adaptive control theory and used to control an actual high order hydraulic system, and the whole hardware system used, which includes a AT89C51 single chip microcomputer, 74Ls373 flip latch, 6116 store, eight bit ADC0809, and so on, and the satisfactory results obtained in study on hydraulic control system.展开更多
This paper introduces a SF vector control system of a slip frequency controlled induction mo-tor with simple structure,fair performance and convenient operation.It is realized by two singlechip microprocessors and fed...This paper introduces a SF vector control system of a slip frequency controlled induction mo-tor with simple structure,fair performance and convenient operation.It is realized by two singlechip microprocessors and fed from SPWM-GTR inverter.The whole system is combined by twosubsystems,both of them are 8031 single chip microprocessors.The communication between themis coordinated by the full duplex serial port within the chip and ask-and-answer communicationmanner.The error-corrected means adopted has improved the operation reliability of the system.A series of experimental results on a 3 kW induction motor are given at the end of this paper.展开更多
Objective： To evaluate the efficiency of an implanted chip system for the control of heart rate （HR）. Methods： The HR was recorded in six conscious Sprague-Dawley （SD） rats. An implanted chip system was designed...Objective： To evaluate the efficiency of an implanted chip system for the control of heart rate （HR）. Methods： The HR was recorded in six conscious Sprague-Dawley （SD） rats. An implanted chip system was designed to regulate the HR by stimulating the right cervical vagus nerve according to the feedback of real time HR. Each rat was subjected to 30-min regulation and 30-min recovery. The change of HR during the regulation period was compared with the control. The ECG was recorded during the experiment for 24 h. Results： The ECG signals were successfully recorded during the experiment. The HR was significantly decreased during the period of regulation compared with control （-79.3 ± 34.5, P 〈 0.01, n = 6） and then recovered to normal after regulation. Conclusion： The described implanted chip system can regulate the HR to a designated set point.展开更多
Taking a specific production process as an example, this paper introduces the design of multi slot and unequal temperature PID controller based on single chip microcomputer. The mathematical implementation method...Taking a specific production process as an example, this paper introduces the design of multi slot and unequal temperature PID controller based on single chip microcomputer. The mathematical implementation method of PID algorithm and the design method of the hardware and software are discussed, The principle diagram of the hardware circuit implementing the control algorithm and the features of the software possessed are also presented.展开更多
A pressure force control system for hot embossing of microfluidic chips is designed with a moment motor and a ball bearing lead screw. Based on the numeric PID technique, the algorithm of pulsant integral accelerated ...A pressure force control system for hot embossing of microfluidic chips is designed with a moment motor and a ball bearing lead screw. Based on the numeric PID technique, the algorithm of pulsant integral accelerated PID control is presented and the negative effects of nonlinearity from friction, clearance and saturation are eliminated. In order to improve the quick-resixmse characteristic, independent thread technique is adopted. The method of pressure force control based on pulsant integral accelerated PID control and independent thread technique is applied with satisfactory control performance.展开更多
The paper introduces a temperature control systembased on AT89C51 single-chip-microprocessor, and discussesthe principle , hardware structure, and software design of thissystem in detail.
Vibrational strong coupling(VSC)provides a promising way towards not only enhanced control of infrared light but also reshaping of molecular properties,which opens up unprecedented opportunities in ultrasensitive infr...Vibrational strong coupling(VSC)provides a promising way towards not only enhanced control of infrared light but also reshaping of molecular properties,which opens up unprecedented opportunities in ultrasensitive infrared spectroscopy,modification of chemical reactions,and exploration of nonlinear quantum effects.Surface plasmon resonance,excited on simple plasmonic resonators in the infrared,has been demonstrated as a means to realize VSC,but suffers from either limited quality factor for realizing large Rabi splitting or poor reconfigurability for precise detuning control.Here we propose and experimentally demonstrate,for the first time,an on-chip plasmonic resonator based on degeneracy breaking of Wood’s anomaly for VSC.Leveraging the low damping rate of the surface state induced by this degeneracy breaking,we achieve a plasmonic resonance with a high-Q factor exceeding~110,resulting in a Rabi splitting up to~112 cm^(-1) with a subwavelength molecular layer.Additionally,the dispersion of the surface state allows for precise control over VSC detuning by simply adjusting the incident angle of excitation light,even in the absence of photons,enabling a broad detuning range up to 300 cm^(-1).These experimental results align well with our analytical model and numerical simulation.This work provides a promising integrated platform for VSC,with various potential applications in on-chip spectroscopy,polariton chemistry,and polariton devices.展开更多
The development of intelligent control techniques provides powerful means for the control of machine tools. In this paper, a intelligent control technique and an algorithm for precision control of CNC grinding of cera...The development of intelligent control techniques provides powerful means for the control of machine tools. In this paper, a intelligent control technique and an algorithm for precision control of CNC grinding of ceramic chips are introduced. In the process of ceramic chip CNC grinding, the dimension of the chips tends to get larger and the dimensional error to exceed the tolerance as the number of the chips increases which are machined on the same part program. There are many factors leading to the occurrence of the error and the law of error variation is very complicated. With the introduced intelligent self learning error compensation technique, the CNC system can improve the control strategy to compensate the error automatically. The simulational result is also given.展开更多
The high-speed computational performance is gained at the cost of huge hardware resource,which restricts the application of high-accuracy algorithms because of the limited hardware cost in practical use.To solve the p...The high-speed computational performance is gained at the cost of huge hardware resource,which restricts the application of high-accuracy algorithms because of the limited hardware cost in practical use.To solve the problem,a novel method for designing the field programmable gate array(FPGA)-based non-uniform rational B-spline(NURBS) interpolator and motion controller,which adopts the embedded multiprocessor technique,is proposed in this study.The hardware and software design for the multiprocessor,one of which is for NURBS interpolation and the other for position servo control,is presented.Performance analysis and experiments on an X-Y table are carried out,hardware cost as well as consuming time for interpolation and motion control is compared with the existing methods.The experimental and comparing results indicate that,compared with the existing methods,the proposed method can reduce the hardware cost by 97.5% using higher-accuracy interpolation algorithm within the period of 0.5 ms.A method which ensures the real-time performance and interpolation accuracy,and reduces the hardware cost significantly is proposed,and it’s practical in the use of industrial application.展开更多
Electron cyclotron resonance heating (ECRH) system is one of the most important Tokamak auxiliary heating methods. However, there are growing demands for ECRH system as the physical experiments progress which meanwhil...Electron cyclotron resonance heating (ECRH) system is one of the most important Tokamak auxiliary heating methods. However, there are growing demands for ECRH system as the physical experiments progress which meanwhile adds the difficulty of designing and building the control system of its power source. In this paper, the method of designing a control system based on Single Chip Microcomputer (SCM) and Field Programmable Gate Array (FPGA) is introduced according to its main requirements. The experimental results show that the control system in this paper achieves the conversion of different working modes, gets exact timing, and realizes the failure protection in 10us thus can be used in the ECRH system.展开更多
A distributed control system is designed for plasma spraying equipment and the configurations of system software and hardware is discussed. Through founding an expert database, the spraying process parameters are work...A distributed control system is designed for plasma spraying equipment and the configurations of system software and hardware is discussed. Through founding an expert database, the spraying process parameters are worked out and the initialization and control of spraying process are realized. The plasma spraying system with this control configuration can simplify the spraying operation, improve automation level of spray process, and approach the experience criterion as soon as possible.展开更多
In order to reduce dependence of operating skill ,fuzzy control system is developed, the core of which is a 16 bit Single Chip Microcomputer of Intel 80C196KC.It is realized by software programming. In this system two...In order to reduce dependence of operating skill ,fuzzy control system is developed, the core of which is a 16 bit Single Chip Microcomputer of Intel 80C196KC.It is realized by software programming. In this system two fuzzy controller are designed. The PID parameter self adjusting fuzzy controller is used to compensate welding current deviation in the process of arc voltage optimized control. To obtain the optimum result of ultimate frequency of short circuit transfer, the self optimizing fuzzy controller carries out the arc voltage self optimizing by under the condition of the given welding current. Arc voltage and welding current are kept the optimum matching relationship by two fuzzy controllers.展开更多
Because of limited resource of embedded platforms, the computational complexity of advanced control algorithms raises significant challenges for the use of embedded systems in complex control field. A Scilab/Scicos ba...Because of limited resource of embedded platforms, the computational complexity of advanced control algorithms raises significant challenges for the use of embedded systems in complex control field. A Scilab/Scicos based embedded controller is developed on which various control software can be easily modeled, simulated, implemented, and evaluated to meet the ever-expanding requirements of industrial control applications. Built on the Cirrus Logic EP9315 ARM systems-on-chip board, this embedded controller is possible to develop complex embedded control systems that employ advanced control strategies in a rapid and cost-efficient fashion. Due to the free and open source nature of the software packages used, the cost of the embedded controller is minimized.展开更多
基金supported by the National Natural Science Foundation of China(Nos.52325504 and 52235007)the Basic Public Welfare Research Project of Zhejiang Province(No.LGY23H160089)the Science and Technology Plan Project of Taizhou City(No.24ywa08).
文摘Globally,approximately 10 million new tuberculosis(TB)cases are reported annually.Delayed diagnosis due to low detection rates is the primary cause of mortality.Although pathological examination is commonly used for diagnosing TB,5%-30%of cases remain undiagnosed,emphasizing the urgent need to establish quality control(QC)standards to reduce rates of misdiagnosis and missed diagnoses.To address this,we introduced a novel QC chip for detecting Mycobacterium tuberculosis(MTB).A quantitative pathological QC model was constructed by precisely and uniformly integrating MTB and HeLa cells into a photocurable hydrogel.This model was then sliced into uniform sections to create QC chips.It demonstrated that the QC chips exhibited no significant differences in intra-batch or inter-batch variation(coefficient of variation<5%),and remained stable at−80°C for one year.Furthermore,these chips were found to be 100%effective when tested with 240 clinical samples(200 with special staining and 40 with polymerase chain reaction).In addition to enhancing TB detection rates,this approach offers visualization,quantification,and sustainable production.Overall,this work provides a novel framework for developing QC chips for pathological testing,offering a reliable solution to enhance clinical diagnostic workflows.
文摘Presents a one grade adaptive controller with one reference model which is built according to δ MRACS adaptive control theory and used to control an actual high order hydraulic system, and the whole hardware system used, which includes a AT89C51 single chip microcomputer, 74Ls373 flip latch, 6116 store, eight bit ADC0809, and so on, and the satisfactory results obtained in study on hydraulic control system.
文摘This paper introduces a SF vector control system of a slip frequency controlled induction mo-tor with simple structure,fair performance and convenient operation.It is realized by two singlechip microprocessors and fed from SPWM-GTR inverter.The whole system is combined by twosubsystems,both of them are 8031 single chip microprocessors.The communication between themis coordinated by the full duplex serial port within the chip and ask-and-answer communicationmanner.The error-corrected means adopted has improved the operation reliability of the system.A series of experimental results on a 3 kW induction motor are given at the end of this paper.
基金supported by grant from National Nature Science Found (30670767)
文摘Objective： To evaluate the efficiency of an implanted chip system for the control of heart rate （HR）. Methods： The HR was recorded in six conscious Sprague-Dawley （SD） rats. An implanted chip system was designed to regulate the HR by stimulating the right cervical vagus nerve according to the feedback of real time HR. Each rat was subjected to 30-min regulation and 30-min recovery. The change of HR during the regulation period was compared with the control. The ECG was recorded during the experiment for 24 h. Results： The ECG signals were successfully recorded during the experiment. The HR was significantly decreased during the period of regulation compared with control （-79.3 ± 34.5, P 〈 0.01, n = 6） and then recovered to normal after regulation. Conclusion： The described implanted chip system can regulate the HR to a designated set point.
文摘Taking a specific production process as an example, this paper introduces the design of multi slot and unequal temperature PID controller based on single chip microcomputer. The mathematical implementation method of PID algorithm and the design method of the hardware and software are discussed, The principle diagram of the hardware circuit implementing the control algorithm and the features of the software possessed are also presented.
基金This project is supported by National Hi-tech Research and Development Program of China (863 Program, No. 2004AA404260).
文摘A pressure force control system for hot embossing of microfluidic chips is designed with a moment motor and a ball bearing lead screw. Based on the numeric PID technique, the algorithm of pulsant integral accelerated PID control is presented and the negative effects of nonlinearity from friction, clearance and saturation are eliminated. In order to improve the quick-resixmse characteristic, independent thread technique is adopted. The method of pressure force control based on pulsant integral accelerated PID control and independent thread technique is applied with satisfactory control performance.
文摘The paper introduces a temperature control systembased on AT89C51 single-chip-microprocessor, and discussesthe principle , hardware structure, and software design of thissystem in detail.
基金supported by the National Key Research and Development Program of China(Grant No.2024YFE0105200)the National Nature Science Foundation of China(Grant No.62405284)+2 种基金the Key Research and Development Program of Henan Province(Grant No.241111220600)the JSPS KAKENHI(Grant No.JP20K14785)the Murata Science Foundation.
文摘Vibrational strong coupling(VSC)provides a promising way towards not only enhanced control of infrared light but also reshaping of molecular properties,which opens up unprecedented opportunities in ultrasensitive infrared spectroscopy,modification of chemical reactions,and exploration of nonlinear quantum effects.Surface plasmon resonance,excited on simple plasmonic resonators in the infrared,has been demonstrated as a means to realize VSC,but suffers from either limited quality factor for realizing large Rabi splitting or poor reconfigurability for precise detuning control.Here we propose and experimentally demonstrate,for the first time,an on-chip plasmonic resonator based on degeneracy breaking of Wood’s anomaly for VSC.Leveraging the low damping rate of the surface state induced by this degeneracy breaking,we achieve a plasmonic resonance with a high-Q factor exceeding~110,resulting in a Rabi splitting up to~112 cm^(-1) with a subwavelength molecular layer.Additionally,the dispersion of the surface state allows for precise control over VSC detuning by simply adjusting the incident angle of excitation light,even in the absence of photons,enabling a broad detuning range up to 300 cm^(-1).These experimental results align well with our analytical model and numerical simulation.This work provides a promising integrated platform for VSC,with various potential applications in on-chip spectroscopy,polariton chemistry,and polariton devices.
文摘The development of intelligent control techniques provides powerful means for the control of machine tools. In this paper, a intelligent control technique and an algorithm for precision control of CNC grinding of ceramic chips are introduced. In the process of ceramic chip CNC grinding, the dimension of the chips tends to get larger and the dimensional error to exceed the tolerance as the number of the chips increases which are machined on the same part program. There are many factors leading to the occurrence of the error and the law of error variation is very complicated. With the introduced intelligent self learning error compensation technique, the CNC system can improve the control strategy to compensate the error automatically. The simulational result is also given.
基金supported by National Key Basic Research Program of China(973 ProgramGrant No.2011CB706804)+1 种基金Shanghai Municipal Science and Technology Commission of China(Grant No.11QH1401400)Research Project of State Key Laboratory of Mechanical System & Vibration of China(Grant No.MSVMS201102)
文摘The high-speed computational performance is gained at the cost of huge hardware resource,which restricts the application of high-accuracy algorithms because of the limited hardware cost in practical use.To solve the problem,a novel method for designing the field programmable gate array(FPGA)-based non-uniform rational B-spline(NURBS) interpolator and motion controller,which adopts the embedded multiprocessor technique,is proposed in this study.The hardware and software design for the multiprocessor,one of which is for NURBS interpolation and the other for position servo control,is presented.Performance analysis and experiments on an X-Y table are carried out,hardware cost as well as consuming time for interpolation and motion control is compared with the existing methods.The experimental and comparing results indicate that,compared with the existing methods,the proposed method can reduce the hardware cost by 97.5% using higher-accuracy interpolation algorithm within the period of 0.5 ms.A method which ensures the real-time performance and interpolation accuracy,and reduces the hardware cost significantly is proposed,and it’s practical in the use of industrial application.
文摘Electron cyclotron resonance heating (ECRH) system is one of the most important Tokamak auxiliary heating methods. However, there are growing demands for ECRH system as the physical experiments progress which meanwhile adds the difficulty of designing and building the control system of its power source. In this paper, the method of designing a control system based on Single Chip Microcomputer (SCM) and Field Programmable Gate Array (FPGA) is introduced according to its main requirements. The experimental results show that the control system in this paper achieves the conversion of different working modes, gets exact timing, and realizes the failure protection in 10us thus can be used in the ECRH system.
文摘A distributed control system is designed for plasma spraying equipment and the configurations of system software and hardware is discussed. Through founding an expert database, the spraying process parameters are worked out and the initialization and control of spraying process are realized. The plasma spraying system with this control configuration can simplify the spraying operation, improve automation level of spray process, and approach the experience criterion as soon as possible.
文摘In order to reduce dependence of operating skill ,fuzzy control system is developed, the core of which is a 16 bit Single Chip Microcomputer of Intel 80C196KC.It is realized by software programming. In this system two fuzzy controller are designed. The PID parameter self adjusting fuzzy controller is used to compensate welding current deviation in the process of arc voltage optimized control. To obtain the optimum result of ultimate frequency of short circuit transfer, the self optimizing fuzzy controller carries out the arc voltage self optimizing by under the condition of the given welding current. Arc voltage and welding current are kept the optimum matching relationship by two fuzzy controllers.
基金supported in part by the National Natural Science Foundation under Grant No.61070003,No.61272020,and No.61071128Zhejiang Provincial Natural Science Foundation under Grant No.R1090052 and No.Y1101184
文摘Because of limited resource of embedded platforms, the computational complexity of advanced control algorithms raises significant challenges for the use of embedded systems in complex control field. A Scilab/Scicos based embedded controller is developed on which various control software can be easily modeled, simulated, implemented, and evaluated to meet the ever-expanding requirements of industrial control applications. Built on the Cirrus Logic EP9315 ARM systems-on-chip board, this embedded controller is possible to develop complex embedded control systems that employ advanced control strategies in a rapid and cost-efficient fashion. Due to the free and open source nature of the software packages used, the cost of the embedded controller is minimized.
