This paper investigates the effects of charge parameters of the underwater contact explosion based on the axisymmetric smoothed particle hydrodynamics （SPH） method. The dynamic boundary particle is proposed to impro...This paper investigates the effects of charge parameters of the underwater contact explosion based on the axisymmetric smoothed particle hydrodynamics （SPH） method. The dynamic boundary particle is proposed to improve the pressure fluctuation and numerical accuracy near the symmetric axis. An in-depth study is carried out over the influence of charge shapes and detonation modes on the near-field loads in terms of the peak pressure and impulse of shock waves. For different charge shapes, the cylindrical charge with different length-diameter ratios may cause strong directivity of peak pressure and impulse in the near field. Compared with spherical charge, the peak pressure of cylindrical charge may be either weakened or enhanced in different directions. Within a certain range, the greater the length-diameter ratio is, the more obvious the effect will be. The weakened ratio near the detonation end may reach 25% approximately, while the enhanced ratio may reach around 20% in the opposite direction. However, the impulse in different directions seems to be uniform. For different detonation modes, compared with point-source explosion, the peak pressure of plane-source explosion is enhanced by about 5%. Besides, the impulse of plane-source explosion is enhanced by around 5% near the detonation end, but close to those of the point-source explosion in other directions. Based on the material constitutive relation in the axisymmetric coordinates, a simple case of underwater contact explosion is simulated to verify the above conclusions, showing that the charge parameters of underwater contact explosion should not be ignored.展开更多
A coal-loaded charge induction monitoring system is developed to effectively forecast the dynamic disasters caused by coal failure.Specifically,a digital finite impulse response(FIR)filter is designed to denoise and f...A coal-loaded charge induction monitoring system is developed to effectively forecast the dynamic disasters caused by coal failure.Specifically,a digital finite impulse response(FIR)filter is designed to denoise and filter the signal,and the time-frequency domain evolution of induced charge signals is analyzed during coal failure experiments.The quantitative relationships between the induced electric charge and stress-strain energy,and ultimately,between induced electric charge and coal deformation/failure,are revealed.Ultimately,the electric charge sensor exhibits high signal collection frequency and high sensitivity,and the FIR low-pass filter constructed in MATLAB effectively denoises and filters induced charge signals.The main frequency range of the white noise is 50-500 Hz,and the main frequency of the charge signal induced by coal deformation and failure is concentrated in the range of 0-50 Hz.The optimal distances for monitoring cubic and cylindrical raw coal samples using this sensor are 9 mm and 11 mm,respectively.Notably,strain energy is released faster when it can dissipate more readily,and induced charge pulses become denser when more intense signals produce large fluctuations.A method is proposed to identify coal deformation and failure based on changes in the induced electric charge.This study provides a new means of monitoring the early warning signs of dynamic coal mine disasters.Based on our experimental results and conclusions,a new method is proposed to identify coal deformation and failure based on changes in the induced electric charge.The precursor to the moment of coal failure can be identified by monitoring the amplitude of the induced charge,the dynamic trend of fluctuation,and the cumulative number of induced electric charge pulses during the process of coal deformation.展开更多
In the present investigation,a new composite nanostructured photoanodes were prepared using TiO_2 nanotubes（TNTs） with TiO_2 nanoparticles（TNPs）.TNPs were synthesized by sol-gel method,and TNTs were prepared throu...In the present investigation,a new composite nanostructured photoanodes were prepared using TiO_2 nanotubes（TNTs） with TiO_2 nanoparticles（TNPs）.TNPs were synthesized by sol-gel method,and TNTs were prepared through alkali hydrothermal method.Dye-sensitized solar cells（DSSCs） were fabricated with different photoanodes comprising of various ratios of TNTs ＋ TNPs,synthetic indigo dye as photosensitizer,PMII（l-propyl-3-methylimidazolium iodide） as ionic liquid electrolyte and cobalt sulfide as counter electrode.The structures and morphologies of TNPs and TNTs were analyzed through X-ray diffractometer,transmission electron microscope and scanning electron microscopes.The results of the investigation showed that the DSSC-4 made with composite photoanode structure（TNTs/TNPs）（90% of TNPs ＋ 10% of TNTs） had improved photocurrent efficiency（2.11%） than pure TNPs（1.00%） and TNT film（0.78%）.Electrochemical impedance spectra revealed that the composite TNTs/TNPs film-based DSSCs possessed the lowest charge-transfer resistances and longest electron lifetime.Hence,it could be concluded that the composite TNTs/TNPs photoanode facilitates the charge transport rate and enhances the efficiencies of DSSCs.展开更多
基金supported by the National Natural Science Foundation of China(No.51379039)the Excellent Young Scientists Fund(No.51222904)
文摘This paper investigates the effects of charge parameters of the underwater contact explosion based on the axisymmetric smoothed particle hydrodynamics （SPH） method. The dynamic boundary particle is proposed to improve the pressure fluctuation and numerical accuracy near the symmetric axis. An in-depth study is carried out over the influence of charge shapes and detonation modes on the near-field loads in terms of the peak pressure and impulse of shock waves. For different charge shapes, the cylindrical charge with different length-diameter ratios may cause strong directivity of peak pressure and impulse in the near field. Compared with spherical charge, the peak pressure of cylindrical charge may be either weakened or enhanced in different directions. Within a certain range, the greater the length-diameter ratio is, the more obvious the effect will be. The weakened ratio near the detonation end may reach 25% approximately, while the enhanced ratio may reach around 20% in the opposite direction. However, the impulse in different directions seems to be uniform. For different detonation modes, compared with point-source explosion, the peak pressure of plane-source explosion is enhanced by about 5%. Besides, the impulse of plane-source explosion is enhanced by around 5% near the detonation end, but close to those of the point-source explosion in other directions. Based on the material constitutive relation in the axisymmetric coordinates, a simple case of underwater contact explosion is simulated to verify the above conclusions, showing that the charge parameters of underwater contact explosion should not be ignored.
基金supported by the National Key Research and Development Project of the National Natural Science Foundation(Grant No.2022YFC3004605)the National Natural Science Foundation of China Youth Science Fund(Grant No.52104087).
文摘A coal-loaded charge induction monitoring system is developed to effectively forecast the dynamic disasters caused by coal failure.Specifically,a digital finite impulse response(FIR)filter is designed to denoise and filter the signal,and the time-frequency domain evolution of induced charge signals is analyzed during coal failure experiments.The quantitative relationships between the induced electric charge and stress-strain energy,and ultimately,between induced electric charge and coal deformation/failure,are revealed.Ultimately,the electric charge sensor exhibits high signal collection frequency and high sensitivity,and the FIR low-pass filter constructed in MATLAB effectively denoises and filters induced charge signals.The main frequency range of the white noise is 50-500 Hz,and the main frequency of the charge signal induced by coal deformation and failure is concentrated in the range of 0-50 Hz.The optimal distances for monitoring cubic and cylindrical raw coal samples using this sensor are 9 mm and 11 mm,respectively.Notably,strain energy is released faster when it can dissipate more readily,and induced charge pulses become denser when more intense signals produce large fluctuations.A method is proposed to identify coal deformation and failure based on changes in the induced electric charge.This study provides a new means of monitoring the early warning signs of dynamic coal mine disasters.Based on our experimental results and conclusions,a new method is proposed to identify coal deformation and failure based on changes in the induced electric charge.The precursor to the moment of coal failure can be identified by monitoring the amplitude of the induced charge,the dynamic trend of fluctuation,and the cumulative number of induced electric charge pulses during the process of coal deformation.
文摘In the present investigation,a new composite nanostructured photoanodes were prepared using TiO_2 nanotubes（TNTs） with TiO_2 nanoparticles（TNPs）.TNPs were synthesized by sol-gel method,and TNTs were prepared through alkali hydrothermal method.Dye-sensitized solar cells（DSSCs） were fabricated with different photoanodes comprising of various ratios of TNTs ＋ TNPs,synthetic indigo dye as photosensitizer,PMII（l-propyl-3-methylimidazolium iodide） as ionic liquid electrolyte and cobalt sulfide as counter electrode.The structures and morphologies of TNPs and TNTs were analyzed through X-ray diffractometer,transmission electron microscope and scanning electron microscopes.The results of the investigation showed that the DSSC-4 made with composite photoanode structure（TNTs/TNPs）（90% of TNPs ＋ 10% of TNTs） had improved photocurrent efficiency（2.11%） than pure TNPs（1.00%） and TNT film（0.78%）.Electrochemical impedance spectra revealed that the composite TNTs/TNPs film-based DSSCs possessed the lowest charge-transfer resistances and longest electron lifetime.Hence,it could be concluded that the composite TNTs/TNPs photoanode facilitates the charge transport rate and enhances the efficiencies of DSSCs.
